From the Sector

Reset
196 results
Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

(c) AkzoNobel
01.03.2023

AkzoNobel publishes 2022 annual report

AkzoNobel has published its digital Report 2022, which gives details of the company’s ongoing transformation during a challenging year of persistent worldwide uncertainty.

The Report 2022 website includes coverage of AkzoNobel’s financial results and key business developments, while the company’s progress on its sustainability ambitions is highlighted throughout.

The online report offers a wide range of interactive content and infographics. Visitors can also make use of various tools to compare key data and download tables.

Meanwhile, the Sustainability statements – traditionally one of the most visited sections – has been revamped and is themed around the key areas of climate change, circularity, and health and well-being. Several case studies also feature prominently.

AkzoNobel has published its digital Report 2022, which gives details of the company’s ongoing transformation during a challenging year of persistent worldwide uncertainty.

The Report 2022 website includes coverage of AkzoNobel’s financial results and key business developments, while the company’s progress on its sustainability ambitions is highlighted throughout.

The online report offers a wide range of interactive content and infographics. Visitors can also make use of various tools to compare key data and download tables.

Meanwhile, the Sustainability statements – traditionally one of the most visited sections – has been revamped and is themed around the key areas of climate change, circularity, and health and well-being. Several case studies also feature prominently.

More information:
AkzoNobel Annual Report digital
Source:

AkzoNobel

03.02.2023

Fiery® announces Independence

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

“Fiery will remain focused on working closely with its OEM partners, including the EFI Inkjet business, to continue developing cutting-edge technology that drives the next generation of automation, accuracy, and profit potential in digital printing,” Mr. Weiss continued. “Fiery now has a greater ability to serve as a neutral partner to ensure OEMs capture success within digital print. We look forward to accelerating our investment as a standalone company, while driving our expanding product portfolio, incorporating world-class color algorithms, and developing advanced cloud technology.”

Source:

EFI

17.01.2023

EuroShop Start-up Hub für junge Retail Technology Unternehmen

Auch in diesem Messejahr werden kreative junge Unternehmen vom 26. Februar bis 02. März 2023 wieder die Gelegenheit haben, auf der EuroShop, The World´s No. 1 Retail Trade Fair, Entscheidern aus der internationalen Retail-Branche ihre Lösungen für einen modernen, zukunftsfähigen Handel vorzustellen und ihre Kontakte auszubauen.

Dazu wird es wieder eine eigene Präsentationsfläche, den sogenannten Start-up Hub geben, der in der Dimension Retail Technology angesiedelt ist. Die Newcomer haben die Gelegenheit, ihre Entwicklungen und Angebote beispielsweise zu künstlicher Intelligenz, Analyselösungen, In-Store-Marketing, Smart Stores, POS-Lösungen und vieles mehr zu erläutern.

Ergänzt wird die Sonderfläche durch die Start-up Stage, auf der junge Unternehmerinnen und Unternehmer ihre Best Practices und aktuellen Entwicklungen aus erster Hand vorstellen.

Einige Unternehmen des Start-up Hubs im Kurzportrait:

Adapta Robotics
Adapta Robotics ist Hersteller des Roboters ERIS, der speziell für den Einzelhandel entwickelt wurde und zur automatischen Erkennung von nicht mehr vorrätigen Waren und zur Vermeidung von Regalpreisfehlern eingesetzt wird.

Auch in diesem Messejahr werden kreative junge Unternehmen vom 26. Februar bis 02. März 2023 wieder die Gelegenheit haben, auf der EuroShop, The World´s No. 1 Retail Trade Fair, Entscheidern aus der internationalen Retail-Branche ihre Lösungen für einen modernen, zukunftsfähigen Handel vorzustellen und ihre Kontakte auszubauen.

Dazu wird es wieder eine eigene Präsentationsfläche, den sogenannten Start-up Hub geben, der in der Dimension Retail Technology angesiedelt ist. Die Newcomer haben die Gelegenheit, ihre Entwicklungen und Angebote beispielsweise zu künstlicher Intelligenz, Analyselösungen, In-Store-Marketing, Smart Stores, POS-Lösungen und vieles mehr zu erläutern.

Ergänzt wird die Sonderfläche durch die Start-up Stage, auf der junge Unternehmerinnen und Unternehmer ihre Best Practices und aktuellen Entwicklungen aus erster Hand vorstellen.

Einige Unternehmen des Start-up Hubs im Kurzportrait:

Adapta Robotics
Adapta Robotics ist Hersteller des Roboters ERIS, der speziell für den Einzelhandel entwickelt wurde und zur automatischen Erkennung von nicht mehr vorrätigen Waren und zur Vermeidung von Regalpreisfehlern eingesetzt wird.

brighter AI
brighter AI bietet Anonymisierungs-Lösungen für Bilder und Videos auf der Basis modernster Deep-Learning-Technologie.

CNT
CNT Technology rüstet die vorhandene Kühltechnik mit sogenannten „SmartSaver“-Molekularfiltern unkompliziert auf und kann so unerwartete Ausfälle und deren Folgen erheblich reduzieren.

Crunch Analytics
Crunch Analytics ist eine im Retail-Bereich tätige Agentur für fortgeschrittene Datenanalyse, die Entscheidungsträger dabei unterstützt, eine hohe Rentabilität und Effizienz zu erreichen sowie Umweltbelastungen zu verringern.

Envelope
Envelope ist ein auf den Einzelhandel spezialisiertes Technologie-Startup, das Supermarktketten und Unternehmen der FMCG-Branche dabei hilft, eine lückenlose Verfügbarkeit von Produkten im Regal zu gewährleisten.

Freshflow
Freshflow ist eine KI-gestützte Bestelllösung für den Lebensmitteleinzelhandel, die eigens für die besonderen Herausforderungen im Handel mit Frischware entwickelt wurde.

GoodMaps
GoodMaps bietet eine branchenführende Navigations- und Karten-Technologie für die barrierefreie und integrative Wegweisung in Räumen und im Außenbereich per App.

GreenBill
GreenBill ermöglicht es Unternehmen, digitale Belege auszustellen. Im Gegensatz zu vergleichbaren Anbietern benötigt GreenBill keine Schnittstelle zu Kassensystemen, sondern kann ähnlich wie ein Drucker an jede Kasse angeschlossen werden.

Magenes
Magenes ist eine datenbasierte PLM- und Supplier Collaboration-Plattform. Mit Hilfe von KI-gesteuerten Auswertungen und Empfehlungen sowie durch eine nahtlose Integration in bestehende IT-Ökosysteme hilft die Plattform bei der Entwicklung, Planung und Lieferung der nächsten Kollektion.

Nomitri
Nomitri ist ein KI-Softwareunternehmen aus Berlin, das aktuelle Forschungsergebnisse auf dem Gebiet des eingebetteten, visuellen Deep Learning für innovative Lösungen im Einzelhandel und Quick Commerce nutzt.

Olmaya
Olmaya ist eine Stiftung, die eine Brücke zwischen israelischen Retail Technology Unternehmen und dem Weltmarkt schlagen will. Am Stand von Olmaya haben deshalb zehn innovative Start-ups aus Israel die Möglichkeit, ihre Entwicklungen dem Messe-Publikum vorzustellen. Die Start-ups kommen aus dem Hardware- und Software-Bereich und wollen die Einzelhandelsbranche nachhaltig verändern. Die ausgewählten Unternehmen stellen dabei nur einen Ausschnitt der lebendigen und dynamischen Startup-Szene in Israel dar.

Oriient
Oriient ist ein hochpräzises lndoor-Navigationssystem für den Einzelhandel und Smart Buildings, das den Besuch im Laden verbessern möchte.

Purcell
Das S1 von Purcell ist ein plastikfreies, intelligentes Spender- und Nachfüllsystem für Lebensmittel und Produkte des täglichen Bedarfs.

Redimi
Die Redimi GmbH ist ein deutsches Start-up, das Anfang 2022 in Berlin mit der Vision gegründet wurde, die Branche der digitalen Geschenkkarten und Coupons im Einzelhandel sowie im E-Commerce zu modernisieren.

Snapfix
Snapfix ist eine Aufgabenverwaltungs-Plattform, mit der Wartungsaufgaben in Geschäften und Einkaufszentren von überall gesteuert werden können.

Sykell
Sykell steht für zeitgemäße und nachhaltige Mehrwegverpackungen im Einzelhandel. Die Mehrweg-Lösung „Einfach Mehrweg“ sorgt für die effiziente Erfüllung der Mehrwegpflicht nach §33 VerpackG, indem es innovative Mehrwegbehälter und ein offenes und zentral gesteuertes Pool-System anbietet.

TareTag
TareTag bringt mittels eines QR-Codes, der dauerhaft auf einem Mehrweg-Gefäß angebracht wird, Verpackungsinformationen auf ein digitales Etikett.

Tokinomo
Tokinomo ist ein Regalwerberoboter, der Produkte ins Rampenlicht stellt und eine völlig andere Art der Markenkommunikation am Point of Sale ermöglicht.

Viziotix
Viziotix bietet eine leistungsstarke Barcode Scanning-Software für den Einzelhandel.

Mehr Informationen zu den Unternehmen finden Sie hier.

Source:

Messe Düsseldorf GmbH

 

(c) MUNICH FABRIC START
13.01.2023

MUNICH FABRIC START announces programme for upcoming event

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

Source:

MUNICH FABRIC START / KERN. Consulting

Photo: Messe Düsseldorf, Constanze Tillmann
21.12.2022

WearRAcon Europe Conference to be held at A+A 2023

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.1

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

1 (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

Source:

Messe Düsseldorf GmbH

(c) TEXAID
21.12.2022

TEXAID introduces recycled tote bag with a digital product passport

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

This NFC chip is a circularity.IDⓇ digital product passport, developed by the Berlin-based company, circular.fashion. By scanning the NFC chip on the bag with a cell phone, customers are redirected to the circularity.IDⓇ product platform. On this platform, they can find further information on the supply chain as well as instructions on how to refurbish or return the bag for proper recycling. Through this digital product passport, a total transparency over the entire bag production is enabled and for customers it is an easy and quick way to get the information they need.

The chip also allows the manual sorters to getthe product information much faster to make a better sorting decision, e.g. the fiber composition. For this purpose, circular.fashion's intelligent sorting stations are used to scan the chip. Several of these stations have been installed at TEXAID's sorting facility in Apolda, Germany, to facilitate optimized reuse and recycling decisions and ensure another life for the product or fiber.

Source:

TEXAID

16.12.2022

IndustriAll Europe and Euratex: Joint SSDC Textiles & Clothing Statement

The European textiles and clothing sector is set for a major transformation which will affect both industry and workers. The EU’s strategy for sustainable and circular textiles aims to ensure that by 2030, textile products placed on the EU market are long-lived and recyclable with the industry moving from a linear to a circular business model. This strategy is accompanied with the EU’s transition pathway for a more resilient, sustainable, and digital textiles ecosystem linking the green transition with the digital transition while stressing the need for the sector to remain competitive.

IndustriAll European Trade Union (industriAll Europe) and Euratex, representing the workers and employers in the textiles and clothing sectors respectfully, jointly highlight both the challenges and opportunities of the giant forthcoming transformation of the sector and call for action to ensure that European industrial policy is fit for purpose and enables the sector to transform without negatively impacting workers or European industry.

Specifically, the European social partners jointly call for:

The European textiles and clothing sector is set for a major transformation which will affect both industry and workers. The EU’s strategy for sustainable and circular textiles aims to ensure that by 2030, textile products placed on the EU market are long-lived and recyclable with the industry moving from a linear to a circular business model. This strategy is accompanied with the EU’s transition pathway for a more resilient, sustainable, and digital textiles ecosystem linking the green transition with the digital transition while stressing the need for the sector to remain competitive.

IndustriAll European Trade Union (industriAll Europe) and Euratex, representing the workers and employers in the textiles and clothing sectors respectfully, jointly highlight both the challenges and opportunities of the giant forthcoming transformation of the sector and call for action to ensure that European industrial policy is fit for purpose and enables the sector to transform without negatively impacting workers or European industry.

Specifically, the European social partners jointly call for:

  1. EU action to guarantee that the European textiles ecosystem remains competitive, including ensuring a level global playing field.
  2. Measures to increase the demand of sustainable products including awareness raising campaigns, incentives such as lower VAT rates, and sustainability criteria in public procurement.
  3. Measures to ensure access to green and affordable energy.
  4. Policy gaps to be addressed, such as promoting a harmonised Extended Producer Responsibility approach across the EU and ensuring that SMEs can use Product Environmental Footprints.
  5. Action to ensure that the Sustainable Products Regulation and the forthcoming Digital Product Passport will offer a transparent, predictable and SME-friendly framework.
  6. Investment in attracting, training and reskilling workers including via concrete support for the EU Pact for Skills.
  7. Appropriate funding, sound metrics and legal incentives at regional, national, and European level to support the green and digital transitions of the textile and clothing sectors.
  8. Regional and national authorities to coordinate with sectoral social partners to ensure that the green and digital transitions are fair and just and do not leave the industry, regions or workers behind.
Source:

Euratex

08.12.2022

Lectra to acquire 51% of TextileGenesis

  • Lectra extends its software offer to material traceability

Lectra announces the signature of an agreement to acquire 51% of the capital and voting rights of the Dutch company TextileGenesis. As a major player in the fashion, automotive, and furniture markets, Lectra contributes with boldness and passion to the Industry 4.0 revolution by providing software, equipment, data, and services to brands, manufacturers, and retailers.

Founded in 2018, TextileGenesis provides a Software as a Service (SaaS) platform that enables fashion brands and sustainable textile manufacturers to ensure a reliable, secure and fully digital mapping of their textiles, from the fiber to the consumer, and thereby guarantee their authenticity and origins. This solution ensures the traceability of TextileGenesis’ customers' entire sustainable textile supply chain in order to meet the demands for transparency, driven by changes in legislation in a growing number of countries and by growing consumer awareness, thereby encouraging sustainable development.  

  • Lectra extends its software offer to material traceability

Lectra announces the signature of an agreement to acquire 51% of the capital and voting rights of the Dutch company TextileGenesis. As a major player in the fashion, automotive, and furniture markets, Lectra contributes with boldness and passion to the Industry 4.0 revolution by providing software, equipment, data, and services to brands, manufacturers, and retailers.

Founded in 2018, TextileGenesis provides a Software as a Service (SaaS) platform that enables fashion brands and sustainable textile manufacturers to ensure a reliable, secure and fully digital mapping of their textiles, from the fiber to the consumer, and thereby guarantee their authenticity and origins. This solution ensures the traceability of TextileGenesis’ customers' entire sustainable textile supply chain in order to meet the demands for transparency, driven by changes in legislation in a growing number of countries and by growing consumer awareness, thereby encouraging sustainable development.  

Its innovative traceability mechanism, which addresses both ends of the textile value chain, as well as its network of partners for material certification, and its technology platform guarantee the exchange and tracking of reliable and secure data throughout a material's life cycle.

Several of the world's most prestigious fashion brands as well as leading sustainable fiber producers are already convinced of the value of TextileGenesis' innovative offer, which enables the connection of multiple actors of the sustainable fashion ecosystem on this platform.

At the beginning of January, Lectra will acquire 51% of TextileGenesis for 15.2 million euros. The acquisition of the remaining share capital and voting rights is expected to take place in two stages, in 2026 and 2028, for an amount that will be calculated based on a multiple of the 2025 and 2027 recurring revenues.

(c) Anthropics Technology
02.12.2022

Zyler wins Grosvenor Social Shopping Experience Challenge

Grosvenor, an international retail development and investment company, has launched a search for new technologies that promote innovation and create a social customer experience. A major aim of the challenge was to drive retail recovery in a post-pandemic world where bricks and mortar stores saw footfall slump. Zyler’s try-on solution impressed the judges and the companies will launch the technology with Grosvenor’s retail tenants.

Zyler’s patented technology allows customers to see themselves in any outfit with a head and shoulders photo and basic measurements virtually. For retailers, the try-on experience can be embedded into a website or existing app with only a small snippet of code needed.

Grosvenor, an international retail development and investment company, has launched a search for new technologies that promote innovation and create a social customer experience. A major aim of the challenge was to drive retail recovery in a post-pandemic world where bricks and mortar stores saw footfall slump. Zyler’s try-on solution impressed the judges and the companies will launch the technology with Grosvenor’s retail tenants.

Zyler’s patented technology allows customers to see themselves in any outfit with a head and shoulders photo and basic measurements virtually. For retailers, the try-on experience can be embedded into a website or existing app with only a small snippet of code needed.

Source:

Anthropics Technology

(c) JIAM, Messe Frankfurt Japan Ltd
07.11.2022

JIAM 2022 OSAKA taking place after a six year break

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will soon be held at INTEX OSAKA from 30 November – 3 December 2022. Under the theme of “It all connects at JIAM – the forefront of technology and master craftsmanship”, the 12th edition brings together leading sewing machine suppliers and apparel manufacturers, making it a must-attend event for textile professionals. In this era of change, an international platform to facilitate business and information exchange is essential. The 2022 edition will showcase apparel manufacturing solutions catered to each and every need, combining high-level skillsets and time-tested knowledge with the latest modern-day technology.

As of October, 144 exhibitors from 10 countries and regions (China, Greece, Germany, Hong Kong, India, Italy, Singapore, Taiwan and Thailand) have signed up for JIAM 2022 OSAKA to showcase their latest products and services. Of these, 39 companies (21 domestic, 18 overseas) will be joining the fair for the first time. In addition, two pavilions from Germany (VDMA; Mechanical Engineering Industry Association) and Taiwan (TSMA; Taiwan Sewing Machinery Association) will bring even more product diversity to the show floor. The previous edition of JIAM OSAKA in 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

A wide variety of special seminars
11 special organiser seminars will not only provide relevant industry knowledge, but also offer practical skills for daily work:

  • Manufacturing industry and digital technology
    Mr Atsushi Yasuda, Manager of Ministry of Economy, Trade and Industry Manufacturing Industries Bureau,Industrial Machinery Division
  • Skills training seminar
    1. Twist Jacket (Lapel) pattern and matching sewing (front and shoulder seams)
    2. Shoulder keeper (prevent shoulder collapse) cherish a piece of clothing
    Mr Susumu Inarida, Emeritus Professor of Bunka Fashion Graduate University (BFGU) / Specially Appointed Committee Member of Japan Modelist Associate / Contemporary Master Craftsman Certified by the Ministry of Health, Labor and Welfare
  • "Mottainai!" sustainable initiatives from Osaka!
    Common points between Senshu Towl and OSAKA KABAN and the future
    Mr Eiji Shinoda, President of Shinoda cCorp
    Mr Kenji Fukuroya, Representative Employee of Fukuroya Joint Company etc.
  • About the sustainable fashion community “NewMake”- Upcycling initiatives in collaboration with brands
    Mr Tac Hosokawa, CEO of Story & Co.
  • Win - win strategy on underwear sewing, viewpoint of BISEI SANGYO Co., LTD
    Mr Toru Miyawaki, Managing Executive Officer of BISEI SANGYO Co.,LTD / Chairman of Hikoneseni Cooperative

Home Sewing Machine Zone
Catering to the B2C market, the Home Sewing Machine Zone, will feature major domestic household sewing machine suppliers. To promote the joy of sewing, a special workshop will be organised by Brother Industries Ltd, Janome Corp, JUKI Corp and JASMA covering topics such as the use of upcycled materials. As part of JIAM 2022 OSAKA’s sustainable development goals, visitors will be taught to sew “cup sleeves” using discarded items and materials from the DIY brand WHTATNOT. Attendees will also learn about upcycling, the process of upgrading unwanted items into new products that are useful. Another highlight will be the awards for JASMA’s “42th Home Sewing Competition for Elementary, Middle, and High School Students”.

Source:

JIAM, Messe Frankfurt Japan Ltd / Messe Frankfurt (HK) Limited

(c) EFI
31.10.2022

EFI sells 300th VUTEk FabriVU Printer

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

The upgraded performance comes courtesy of the VUTEk FabriVU 340+ printer’s new, eight-printhead, CMYK x 2 array, along with new electronics for reliable and consistent premium-quality output of exhibit graphics, backlit graphics, retail fixture wraps, front lit graphics, block-out banners and fabric interior decor. A flag printing kit on the printer easily handles porous media in high-penetration applications by collecting inks without touching the rear side of the media.
 
As with all VUTEk FabriVU printers, it prints both transfer paper and direct-to-fabric.

Source:

EFI

Photo: Euratex
26.10.2022

EURATEX & ATP Convention successfully concluded in Porto

  • European textile industry needs to prepare for a paradigm shift, and become global leader in sustainable textiles

Organised by EURATEX in partnership with the Portuguese Textile Association (ATP), the Porto Convention – Sustainability meets Competitiveness: How to Square the Circle? – took place on 13-14 October in Porto, Portugal, with nearly 250 entrepreneurs attending from all over Europe. They discussed the current challenges of the European textile industry and set the grounds for a bright future, based on some strong foundations: innovation, creativity, quality and sustainability.

In his keynote speech, Mr. Pedro Siza Vieira, Former Minister for the Economy and Digital Transition of Portugal, assessed the geopolitical and macroeconomics changes, and how this will impact on the future of the textile industry: nearshoring and friend-shoring, independence from foreign gas through the use of European sustainable energy, as well as circular and automated production lines. While the current turbulence causes uncertainty, he sees a better future for our industry.

  • European textile industry needs to prepare for a paradigm shift, and become global leader in sustainable textiles

Organised by EURATEX in partnership with the Portuguese Textile Association (ATP), the Porto Convention – Sustainability meets Competitiveness: How to Square the Circle? – took place on 13-14 October in Porto, Portugal, with nearly 250 entrepreneurs attending from all over Europe. They discussed the current challenges of the European textile industry and set the grounds for a bright future, based on some strong foundations: innovation, creativity, quality and sustainability.

In his keynote speech, Mr. Pedro Siza Vieira, Former Minister for the Economy and Digital Transition of Portugal, assessed the geopolitical and macroeconomics changes, and how this will impact on the future of the textile industry: nearshoring and friend-shoring, independence from foreign gas through the use of European sustainable energy, as well as circular and automated production lines. While the current turbulence causes uncertainty, he sees a better future for our industry.

The first CEO Panel, addressing the theme of How to Measure and Communicate about Sustainability, focused on the challenges to translate “sustainability” towards the consumers. The panel addressed the issue of greenwashing and the role of brands in communicating about sustainability. It looked at how the new European Commission regulations on eco-label, digital product passport (DPP) and product environmental footprint (PEF) will create a new framework.

The second CEO Panel, discussing Financing Sustainability, looked at the cost of sustainable investments, and how this cost should be managed within the entire supply chain, including the brands and retailers.

Four workshops with industry experts followed in the afternoon, addressing the themes of Extended Producer Responsibility (EPR) in Textiles, Digital Product Passport (DPP), Recycling Textile Waste and Labelling Textiles (Product Environmental Footprint). As these initiatives will roll out in the coming years – as part of the EU Textile Strategy – participants got a better understanding of the future framework for our industry.

Dirk Vantyghem, Director General of EURATEX, commented on this: “to prepare for a brighter future requires a new regulatory framework, where quality and durability become the norm, where transparency and sustainability is rewarded, where free riders – who do not comply with rules and standards – are kept outside the market. The EU Textile Strategy aims at creating such a framework, which must be fair and balanced, and requires a close and constant dialogue between the regulator and the industry.”

During the 2nd day of the convention, participants had the opportunity to visit state of the art textile companies (Têxteis J.F. Almeida, RIOPELE, and TMG Automotive) and the Portuguese textile  research centre CITEVE. They showcased how the Portuguese textile industry is making this transition, while remaining globally competitive.

Alberto Paccanelli, President of EURATEX, concluded: “We need to attract creative people in our companies, we need to produce top class quality products, and we need to become more sustainable. That is the recipe for our success in a globalised and highly competitive industry.” Paccanelli is positive about the future: “While we face very tough times, I am optimistic about the future of our European textile industry. The rest of the world is watching us, as we move forward with our strategy. We should become their benchmark and Europe should become a global leader in sustainable textiles.”

 

Source:

Euratex

19.10.2022

Kornit Digital issues Second-Annual Impact Report

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

  • Complete elimination of Acute Toxic Amines (CLP category 1, 2, 3) CMR
  • 20% reduction of VOC level in Robusto Inkset and 30% of VOC in Eco Ink/Green

DEI and Community Engagement

  • An increase in women in management, from 30% to 35%
  • Reporting 88% of employees feeling respected and free to be authentic at work - *Intensity measures are per $1 million of revenue.

Kornit Digital’s Impact Strategy
Propelled by an ambition to make a positive impact across all areas of its business and throughout the fashion and textile industries, Kornit further adjusted its Impact Strategy this year towards more expansive, longer-term goals and objectives. Kornit’s refined strategy reflects the Company's dual role as a change agent in the industry—both as a leader empowering the fashion industry to be more sustainable, and as an accountable participant responsible for embracing social and environmental change to make the world a better place.  
The holistic strategy accounts for both roles, across two fundamental pillars—"Enable the Change” and “Be the Change”—and incorporates both social and environmental KPIs designed to meet the Company’s goals and respond to stakeholders’ input, as well as industry and ecosystem needs

Kornit is officially unveiling the report during a press event at PRINTING United Expo 2022.

*Intensity measures are per $1 million of revenue.

Source:

Kornit Digital

17.10.2022

Kelheim Fibres partners with TextileGenesisTM for more transparency

Viscose speciality fibres manufacturer Kelheim Fibres partners with TextileGenesisTM, a traceability platform that creates radical transparency from fibre-to-retail and ensures authenticity d provenance of sustainable textiles against generics.

“Our wood-based fibres are an environmentally friendly basis for sustainable textiles - it's just that consumers often don't know what's behind their garments. But they need to know it’s in their hands to minimise the ecological footprint of the textile industry. Transparency and traceability are the foundation that enables consumers to make informed decisions.”, says Dr. Marina Crnoja-Cosic, Director New Business Development at Kelheim Fibres.

TextileGenesisTM uses blockchain technology to track and verify the use of sustainable fibres all the way from fibre to garment. A digital fibercoin ensures transparency and reliability throughout the entire production line and beyond.

Viscose speciality fibres manufacturer Kelheim Fibres partners with TextileGenesisTM, a traceability platform that creates radical transparency from fibre-to-retail and ensures authenticity d provenance of sustainable textiles against generics.

“Our wood-based fibres are an environmentally friendly basis for sustainable textiles - it's just that consumers often don't know what's behind their garments. But they need to know it’s in their hands to minimise the ecological footprint of the textile industry. Transparency and traceability are the foundation that enables consumers to make informed decisions.”, says Dr. Marina Crnoja-Cosic, Director New Business Development at Kelheim Fibres.

TextileGenesisTM uses blockchain technology to track and verify the use of sustainable fibres all the way from fibre to garment. A digital fibercoin ensures transparency and reliability throughout the entire production line and beyond.

Amit Gautam, Founder & CEO at TexileGenesisTM:"Fashion and textile value chain is undergoing major transformation driven by sustainable materials, shifting consumer demand for sustainable products, and increasingly stringent regulations on transparency. Great to see Kelheim moving the industry forward by actively participating in the traceability journey."

Source:

Kelheim Fibres GmbH

(c) IDTechex
13.10.2022

Innovations in wearable sensor technology through watches and skin patches

IDTechEx report: Wearable Sensors 2023-2033

Overall, this report provides insight into how wearable sensors could be integrated into society long term - the technology underpinning value within the trend towards 'the quantified self'. The main drivers for growth identified are digital health and remote patient monitoring, extended reality, and the metaverse and performance analytics of athletes and sports people.

IDTechEx report: Wearable Sensors 2023-2033

Overall, this report provides insight into how wearable sensors could be integrated into society long term - the technology underpinning value within the trend towards 'the quantified self'. The main drivers for growth identified are digital health and remote patient monitoring, extended reality, and the metaverse and performance analytics of athletes and sports people.

More people than ever before are turning to wearable sensors to monitor their activity levels. Despite its origin in simple step counting, the market for wearable sensors is expanding into the more complex arena of health monitoring. Innovations in wearable sensor technology are expanding the envelope of biometrics accessible through watches and skin patches, addressing the rising demand for remote patient monitoring and decentralized clinical trials but also increasing consumer expectations. This includes easier access to health data, and extends further to sensor integration into headsets and accessories for immersive AR/VR experiences.
 
Motion sensors finding applications beyond step counting
Motion sensing hardware is well established, with accelerometers integrated into almost every wearable. Therefore, as profit margins for manufacturers diminish with commoditization, expanding the application space is crucial to maintain growth. This report provides an outlook for emerging use cases such as health insurance rewards, clinical trials, and professional athlete monitoring.
 
Optical sensors seeking to go further than heart-rate detection
Smart-watch wearers are familiar with the red and green lights on the back of their devices, used to obtain heart-rate data or blood oxygen and further analyzed for insights into calorie burn, VO2 max, and sleep quality.
Sensor developers are interested in pushing the boundaries of what can be measured non-invasively with light - whether it be through new software to analyze photoplethysmography (PPG) signals or new hardware for spectroscopy. Multiple companies are competing to lead in the commercialization of wearable blood pressure, with others setting their sights on ambitious 'clinic on the wrist' devices to replace common hospital tests and even glucose monitoring. This report appraises the potential for optical sensors, and overviews challenges for calibration requirements and regulatory approval.
 
Monitoring of the heart, muscle, and brain
Incorporating conductive materials into wearable technology is a simple concept. However, it has led to a vast variety of wearables sensors including wet electrodes stuck on the skin to measure the heart, dry electrodes in headphones to analyze brain signals, and microneedles within skin patches to quantify muscle movements. As such, this also creates a broad application space for electrodes ranging from vital sign monitoring and sleep analysis for healthcare, to emotional response and stress monitoring for marketing and productivity. This report dedicates a section to the four key categories of electrodes: wet, dry, microneedle, and electronic skin. This includes a summary of key material and manufacturing requirements.
 
Wearable sensors are fundamental to continuous monitoring of health, fitness, and wellness. As applications for wearable technology grow, there are increasing opportunities for sensors that detect parameters ranging from glucose levels to pressure and from motion to temperature. Based on a decade of market research on wearable technology hardware, this report analyses the technological and commercial landscape of this growing industry, both today and into the future. IDTechEx's research in wearables tracks the progress of over 50 wearable electronic product types. Within each of these products, a key focus of the research has been understanding and characterizing the prevalence of sensor types integrated into each.

More information:
wearable sensors IDTechex
Source:

IDTechex

(c) EURATEX
11.10.2022

EURATEX and ATP: 10th European Textile & Apparel Convention in Porto

On 13-14 October, EURATEX in partnership with ATP is organising the 10th European Textile & Apparel Convention in Porto, Portugal; the convention marks also the 24th Textile Industry Forum for Portugal.

The Porto Convention – titled Sustainability meets Competitiveness: How to Square the Circle? – will look at how companies can anticipate the new European regulatory framework, embrace innovation, and develop a business model where sustainability becomes a source of competitiveness and growth. In the current economic, social and political environment, Europe is facing many challenges: increased energy prices, unforeseen inflation and climate change, which add to the day-to-day challenges of running a business. Embracing the European Union’s commitment to a green and digital transformation, the textile industry needs to also move towards a new circular economy where recycling is at the core of the design process supported by digitalisation, innovation and new skills, and creativity. The conference will address explore solutions to turn quality and sustainability into a source of competitiveness.

On 13-14 October, EURATEX in partnership with ATP is organising the 10th European Textile & Apparel Convention in Porto, Portugal; the convention marks also the 24th Textile Industry Forum for Portugal.

The Porto Convention – titled Sustainability meets Competitiveness: How to Square the Circle? – will look at how companies can anticipate the new European regulatory framework, embrace innovation, and develop a business model where sustainability becomes a source of competitiveness and growth. In the current economic, social and political environment, Europe is facing many challenges: increased energy prices, unforeseen inflation and climate change, which add to the day-to-day challenges of running a business. Embracing the European Union’s commitment to a green and digital transformation, the textile industry needs to also move towards a new circular economy where recycling is at the core of the design process supported by digitalisation, innovation and new skills, and creativity. The conference will address explore solutions to turn quality and sustainability into a source of competitiveness.

The Porto Convention will see representatives of national and European institutions, experts from the industry and like-minded entrepreneurs come together to discuss ideas, share experiences and find solutions to face common challenges.

Source:

EURATEX

(c) AkzoNobel
26.09.2022

AkzoNobel’s Paint the Future India challenge awards two startups

Two startups in India have won Paint the Future awards and the chance to continue working together with AkzoNobel to accelerate their solutions.

The winning submissions answered the company’s call for innovative ways to enhance the digital consumer experience for Dulux paints in India. The winners are:

  • HyperReality Technologies - Collaborative platform for inspiration and visualization of a space in the metaverse
  • Fluid AI - Multi-channel, conversational, immersive and interactive AI platform to guide consumers during their painting journey

Having already signed letters of intent to work together on sustainable business opportunities, the two winners now join AkzoNobel’s accelerator program.

The India startup challenge is the third regional edition of Paint the Future. Run in partnership with NASSCOM Industry Partnership Program (NIPP), the challenge attracted 207 submissions from 33 cities across India.

Two startups in India have won Paint the Future awards and the chance to continue working together with AkzoNobel to accelerate their solutions.

The winning submissions answered the company’s call for innovative ways to enhance the digital consumer experience for Dulux paints in India. The winners are:

  • HyperReality Technologies - Collaborative platform for inspiration and visualization of a space in the metaverse
  • Fluid AI - Multi-channel, conversational, immersive and interactive AI platform to guide consumers during their painting journey

Having already signed letters of intent to work together on sustainable business opportunities, the two winners now join AkzoNobel’s accelerator program.

The India startup challenge is the third regional edition of Paint the Future. Run in partnership with NASSCOM Industry Partnership Program (NIPP), the challenge attracted 207 submissions from 33 cities across India.

Nine finalists were invited to an intense two-day bootcamp program, where customized sessions with AkzoNobel experts helped them further refine their solution’s value proposition before the final pitch to the Paint the Future jury.

Source:

AkzoNobel

(c) JEC Group
23.09.2022

JEC Forum DACH 2022 announces program

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

This year’s JEC forum DACH, taking place from November 29 to 30, 2022, is strategically located in a composites « golden triangle », between Munich, Augsburg and Ingelstadt. This dynamic area, at the heart of the Bavarian region is known to be hosting major companies such as Airbus, Faurecia, Kuka, Siemens, Voith Composites, KraussMaffei Technologies, Cevotec, Munich Composites, or Premium Aerotec, thus promising a two-days opportunity to meet with key decision makers.

The digital platform available to all participants prior to the event enables to schedule one to one business meetings between buyers and suppliers from the whole value chain of composites, as well as informal networking during breaks, lunches and evening event.

In total, 500 attendees, suppliers and buyers, from Germany, Austria and Switzerland, are expected to participate to JEC Forum DACH 2022.

Business meetings event*
DAY 1 – November 29, 2022:

  • 10.15 – 11.45 am – “Keynote and Plenary Conference Session : Market Developments
  • Moderator: Dr. Michael Effing, AVK
  • 4.0 – 5.30 pm – “Keynote and Plenary Conference Session: Recycling of Composites

DAY 2 – November 30, 2022:

  • 9.00– 10.30 am – “Keynote and Plenary Conference Session: Sustainability of Composites
  • 3.15 – 4.45 pm – “Keynote and Plenary Conference Session: Innovations: Raw Materials, Processes and Applications

Celebrating composites innovation through awards and startup competition

  • The AVK Innovation Awards: Goal is to promote and give prominence to new products/components and applications made from fiber-reinforced plastics (FRP) and promote new processes and methods for manufacturing FRP products.
  • Startup Booster competition: The contest is open to entrepreneurs, SMEs, startups and academic spinoffs building innovative composite and advanced materials projects that are based in Germany, Austria or Switzerland (the DACH region).

*You can view the full program here.

Source:

JEC Group

(c) Texaid
21.09.2022

TEXAID installs intelligent sorting stations from circular.fashion

Digital Product Passports can now be processed at TEXAID’s largest sorting facility, thanks to circular.fashion’s intelligent sorting stations, which use RFID and NFC technology to improve the quality and consistency of manual sorting.

Digital Product Passports (DPP) have been recognised by the EU as an enabler for circular fashion and textiles. Technology company circular.fashion has been a leader in this effort, releasing the circularity.ID in 2018 and developing Intelligent Sorting Stations to bring ID based sorting to the textile reuse and recycling industry.

ID based sorting optimises the manual sorting process for reuse and recycling by giving sorters data to make decisions more accurately and consistently. TEXAID has, by adopting this technology, increased Europe’s capacity to process DPPs.

Digital Product Passports can now be processed at TEXAID’s largest sorting facility, thanks to circular.fashion’s intelligent sorting stations, which use RFID and NFC technology to improve the quality and consistency of manual sorting.

Digital Product Passports (DPP) have been recognised by the EU as an enabler for circular fashion and textiles. Technology company circular.fashion has been a leader in this effort, releasing the circularity.ID in 2018 and developing Intelligent Sorting Stations to bring ID based sorting to the textile reuse and recycling industry.

ID based sorting optimises the manual sorting process for reuse and recycling by giving sorters data to make decisions more accurately and consistently. TEXAID has, by adopting this technology, increased Europe’s capacity to process DPPs.

The installation and testing of TEXAID’s new Intelligent Sorting Stations was completed successfully shortly before the holiday period. Initial test results indicate that ID based sorting can make sorting decisions more reliable and more consistent. The team also sees a potential for ID based sorting to reduce training costs for new employees and maximise the value of their sorting decisions. This advancement was made through the CIRTEX project, funded through the KMU Innovativ funding programme from the German Federal Ministry of Education and Research.

The Intelligent Sorting Stations at TEXAID are now operational, and brands and retailers have the ability to adopt the circularity.ID as a Digital Product Passport and have textile products returned to TEXAID for ID based sorting.