From the Sector

Reset
65 results
11.03.2024

Zünd auf Texprocess 2024

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Funktionen in MindCUT Studio
Auf der Texprocess stellt Zünd die sogenannte Feature Recognition vor. Mit dieser neuen Funktion erkennt die Software Motive sowie die verschiedenen Teile eines Kleidungsstücks mithilfe künstlicher Intelligenz und platziert diese für den Zuschnitt hochpräzise auf der Stoffbahn. Der Prozess ist schnell erledigt: Modell auswählen, Motiveigenschaften platzieren und die einzelnen Schnittteile zuweisen. Die Software erkennt deren Positionen und repetiert sie entlang der Stoffbahn. Unmittelbar danach kann der Zuschnitt gestartet werden. Die Motiverkennung mithilfe von KI automatisiert einen bislang manuellen Prozess und erlaubt eine hohe Wiederholgenauigkeit.
Neben der Motiverkennung bietet MindCUT auch eine Printed-Cut-Funktion, die Aufdrucke automatisiert erfasst oder Pattern Matching, das rapportierende Muster erkennt, Materialverzug kompensiert und die Marker automatisch mit der Textilmusterung abgleicht.

Roll Handling System – RHS
Das Rollenmagazin bietet Platz für bis zu zehn Textilrollen und kann auftragsabhängig mit unterschiedlichen oder materialidentischen Textiltypen ausgestattet werden. Mit dem grossen, vollautomatischen Rollenmagazin kann die unterbrechungsfreie Zuschnittzeit erhöht werden. Das Roll Handling System – RHS beschickt den Zünd Cutter komplett autonom mit Material. Das ermöglicht lange Produktionsfenster, in denen keine Bedieneingriffe mehr notwendig sind. Lediglich die Bestückung des Rollenmagazins erfolgt noch manuell. Dabei erfasst die Bedienerin die einzelnen Rollen mittels Barcode-Scan. Materialzuweisung und Steuerung des RHS erfolgen dann direkt über die MindCUT-Software.

Source:

Zünd Systemtechnik AG

Foto Zünd Systemtechnik AG
30.01.2024

Zünd: Niederlassung in Brasilien

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Source:

Zünd Systemtechnik AG

Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics) © Business Angels Deutschland e. V. (BAND)
Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics)
26.01.2024

Start-up: Bio-based aerogel fibres replace synthetic insulation materials

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

"We can revolutionise the construction world with bio-based aerogel fibres," explains ITA founder Dr Sascha Schriever proudly. "If all insulation materials in construction are converted to bio-based aerogel fibres, all builders can realise their dream of a sustainable house."

SA Dynamics has come a good deal closer to its founding goal by winning the KUER.NRW 2023 business plan competition. The spin-off from Institut für Textiltechnik (ITA) and Department for Industrial Furnaces and Heat Engineering (IOB) at RWTH Aachen University is scheduled for spring 2025.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

11.12.2023

OETI PPE customers awarded OEKO-TEX® STeP certification

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

For the Austrian company Ötscher – Berufskleidung (workwear), Managing Director Thiemo Götzl emphasises the strengths of the certification in transparent communication with customers and stakeholders and a comprehensive overview of all aspects of the supply chain. "The certification also supports compliance with the German Supply Chain Due Diligence Act requirements through transparency and risk mitigation," says Thiemo Götzl.

Source:

OETI - Institut für Oekologie, Technik und Innovation GmbH

Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right © AVK
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right
23.11.2023

CarboScreen: Sensor monitoring for complex carbon fibre production

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Foto MeineRaumluft
05.09.2023

OETI und MeineRaumluft kooperieren

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

More information:
OETI Raumklima
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

ZCC Zünd Cut Center (c) Zünd Systemtechnik AG
ZCC Zünd Cut Center
01.09.2023

ZCC Zünd Cut Center: Neuer automatisierter Zuschnitt

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Dank ihrer Client-Server-Architektur ist Zünd Cut Center flexibel skalierbar. Diese Modularität ermöglicht auf spezifische Produktionsanforderungen zugeschnittene Konfigurationen. Der Anwender erwirbt nur jene Softwarekomponenten, die er benötigt und kann jederzeit weitere Optionen hinzufügen.

ZCC Zünd Cut Center
Zünd bietet das ZCC in zwei verschiedenen Editionen an. Zünd Cut Center Basic ist geeignet für alle, die aufgrund ihrer Produktionsumgebung Funktionen wie einen automatischen Datenimport, eine Auftragsliste oder einen Datenaustausch mit anderen Systemen nicht benötigen. Mit ZCC Zünd Cut Center Basic kann der Bediener Quelldateien manuell über den Cut Editor in .zcc-Dateien umwandeln und als Produktionsdatei im Cut Center öffnen.

ZCC Zünd Cut Center Advanced ist die passende Edition für alle Anwender mit einem höheren Auftragsvolumen und dem Wunsch, durch automatisierte Abläufe die Produktivität zu steigern. Sie haben mehrere Zünd Cutter parallel im Einsatz und wollen zwecks Datenaustausch auch andere Produktionssysteme in den Workflow integrieren. In der Advanced-Edition stehen der Anwenderin Funktionen wie die Auftragsliste, Angaben zur geschätzten Produktionszeit, der Import über Hotfolder oder E-Mail-Benachrichtigungen zur Verfügung.

Für beide Editionen können Softwareoptionen wie Camera Option, Pick & Place Option, Visualizing Option und Routing Option individuell erworben werden.

Source:

Zünd Systemtechnik AG

OETI purchases ECS to expand its PPE portfolio photo: OETI
12.07.2023

OETI purchases ECS to expand its PPE portfolio

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

ECS tests and evaluates occupational health and safety goggles with and without a filter action, passive and active switching protection filters and shields for welders, and laser protection filters, goggles, and shields. The company also tests the optical properties of sunglasses, sports glasses, ski goggles, swimming goggles and motorbike goggles.

With OETI’s takeover, the ECS location in Aalen is retained, and all employees will continue working at ECS. The new Managing Director of ECS GmbH as of 1 July 2023 is Dipl.-Ing. Rolf Diebolder.

‘We are present on the European market, on the American market and, via a representative office, on the Chinese market. With the aid of the new distribution channels through OETI and TESTEX, we want to steadily advance ECS’ expansion and be present on all five continents’, says Managing Director Rolf Diebolder, explaining his strategic plans for ECS. ‘I would like OETI and ECS to develop a joint strategy in order to be able to offer existing and new customers of both companies a complete package which, when combined, will give us a unique selling point in the marketplace’, says Diebolder.

Diebolder also sees further potential in the cooperation with regard to protective laser clothing. According to him, this is where the laser laboratory commissioned by ECS could be used to make textiles laser-safe. In the future, there will be more and more ‘hand-held’ devices, i.e. laser welding devices, for which gloves and protective jackets are needed.

Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Untersuchungsmethoden bei der Zertifizierung von Augenschutzprodukten
Untersuchungsmethoden bei der Zertifizierung von Augenschutzprodukten
11.07.2023

OETI kauft ECS zur Erweiterung des PSA-Portfolios

OETI – Mitglied der international tätigen TESTEX Gruppe – kauft das deutsche Unternehmen ECS, um sein Services-Portfolio im Bereich persönlicher Schutzausrüstungen (PSA) zu erweitern.

Seit rund 40 Jahren bietet das OETI – mit Hauptsitz in Österreich, Prüfungen für textile Arbeitskleidung an. Ab1993, mit der Einführung der CE-Kennzeichnung für persönliche Schutzausrüstung und dem Erlassen der PSA-Richtlinie durch die Europäische Union, prüft das OETI nicht nur textile persönliche Schutzausrüstungen, sondern zertifiziert sie auch EU-konform. Im Jahr 1995 erfolgt OETI‘s Notifizierung in Brüssel als Notified Body (0534) für Baumusterprüfungen und die Überwachung der Qualitätssicherung für das Endprodukt von persönlicher Schutzausrüstung. Geprüft und zertifiziert wird gemäß der aktuellen PSA-Verordnung (EU) 2016/425.

OETI – Mitglied der international tätigen TESTEX Gruppe – kauft das deutsche Unternehmen ECS, um sein Services-Portfolio im Bereich persönlicher Schutzausrüstungen (PSA) zu erweitern.

Seit rund 40 Jahren bietet das OETI – mit Hauptsitz in Österreich, Prüfungen für textile Arbeitskleidung an. Ab1993, mit der Einführung der CE-Kennzeichnung für persönliche Schutzausrüstung und dem Erlassen der PSA-Richtlinie durch die Europäische Union, prüft das OETI nicht nur textile persönliche Schutzausrüstungen, sondern zertifiziert sie auch EU-konform. Im Jahr 1995 erfolgt OETI‘s Notifizierung in Brüssel als Notified Body (0534) für Baumusterprüfungen und die Überwachung der Qualitätssicherung für das Endprodukt von persönlicher Schutzausrüstung. Geprüft und zertifiziert wird gemäß der aktuellen PSA-Verordnung (EU) 2016/425.

Die ECS GmbH - Prüf- und Zertifizierungsstelle für Augen- und Gesichtsschutz mit Sitz in Aalen wurde vor 15 Jahren gegründet und ist eine weltweit agierende Institution für die Prüfung und Zertifizierung von Augen- und Gesichtsschutzgeräten. Für persönliche Schutzprodukte bei Laseranwendungen und für Schweißarbeiten ist das Unternehmen eine der führenden unabhängigen Prüfeinrichtungen.

Die ECS prüft und bewertet Arbeitsschutzbrillen mit und ohne Filterwirkung, passive und aktiv-schaltende Schweißerschutzfilter und -abschirmungen, Laserschutzfilter, -brillen und -abschirmungen. Ebenso prüft das Unternehmen die optischen Eigenschaften von Sonnen-, Sport-, Ski-, Schwimm- und Motorradbrillen.

Nach der Übernahme durch OETI bleibt der ECS-Standort in Aalen erhalten, alle Mitarbeiter*innen sind weiterhin bei der ECS tätig. Neuer Geschäftsführer der ECS GmbH ist ab 1. Juli 2023 Dipl.-Ing. Rolf Diebolder.

„Wir sind auf dem europäischen, auf dem amerikanischen und über eine Vertretung auf dem chinesischen Markt präsent. Mit Hilfe der neuen Vertriebswege durch OETI und TESTEX wollen wir den Ausbau der ECS stetig vorantreiben und auf allen fünf Kontinenten präsent sein.“, so Geschäftsführer Rolf Diebolder.

Weiteres Potenzial in der Zusammenarbeit sieht Diebolder auch in Bezug auf Laserschutzkleidung. Hier könne das von der ECS beauftragte Laserlabor dazu genutzt werden, um Textilien Laserschutz-sicher zu machen. Es wird in Zukunft immer mehr „hand-held“ Geräte geben, also Laserschweißgeräte, für die man Handschuhe und Schutzjacken benötigt.

More information:
OETI PSA
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

(c) Zünd Systemtechnik AG
14.04.2023

Zünd auf der Interzum 2023

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Zünd, ein Spezialist für Zuschnittlösungen für die Polstermöbelindustrie, stellt unter dem Motto «Efficiency to rely on» auf der Interzum 2023 (09.–12.05.2023) die Produktivität und Zuschnitteffizienz in den Fokus.

Am Stand erfährt das Fachpublikum die Vorteile des integrierten Lederzuschnitts am Beispiel eines Zünd D3 Cutters mit Doppelbalkentechnologie. Zünd widmet seinen Messeauftritt sämtlichen Prozessen zwischen Hauterfassung, Zuschnitt und Absortierung. Das Fachpublikum kann sich über modulare Lösungen für die Digitalisierung und das Nesting, den Textil- und Lederzuschnitt und softwareunterstützte Teileentnahme informieren.

Darüber hinaus rückt Zünd seinen integrierten Beratungsansatz in den Vordergrund: «Wir bieten Workflowlösungen für unterschiedlichste Anforderungen und erarbeiten individuell mit unseren Kunden, welche Lösungen am besten zu ihren Herstellungsprozessen und verwendeten Materialien passen. Das bedingt einen einheitlichen Beratungsansatz, der Hardware, Software und Servicedienstleistungen einbezieht», erklärt Manuel Enriquez, Segment Manager Leder.

Source:

Zünd Systemtechnik AG

Photo Pixabay
13.01.2023

Zünd: New subsidiary in Spain

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

As of the beginning of 2023, Zünd Systemtechnik AG acquired its long-standing sales partner Sign-Tronic S.A, which is based in Barcelona.

Sign-Tronic S.A. has been a wholly owned subsidiary of Zünd Systemtechnik AG since the start of 2023 and now operates under the name Zund Ibérica. Sign-Tronic S.A. was established in 1990 and has been an official sales and service partner of Zünd Systemtechnik AG since 1994. Zund Ibérica serves numerous customers in Spain, Portugal and Andorra.

Jordi Lorente is the new CEO of Zund Ibérica. For the time being, he will be actively supported by the previous co-owner and Managing Director Flemming Jensen. Rosa Miralles, also a co-owner, will continue to work in an executive capacity at Zund Ibérica.

Zund Ibérica currently employs 15 people. With more than 1,000 cutters installed, Zund Ibérica is one of the most experienced distributors of both digital cutting systems and software and workflow solutions on the Iberian market. It has its own showroom, which allows customers and interested parties to experience the many possibilities of Zünd’s digital cutting technology in person. Its staff consists of proven experts in consulting, training, installation, and service.

Source:

Zünd Systemtechnik AG

(c) Fraunhofer UMSICHT
28.12.2022

Bewerbungsphase für UMSICHT-Wissenschaftspreis 2023 ist gestartet

Von regenerativen Energien, nachwachsenden Rohstoffen über innovative Werkstoffe, Wassertechnik bis zu Wissens- und Ressourcenmanagement – gemeinsam tragen sie zu einer zukunftsfähigen und nachhaltigen Welt bei. Grundvoraussetzung dafür ist ein gesellschaftlicher Diskurs, in dem neue Entwicklungen Aufmerksamkeit bekommen und verbreitet werden. Mit dem UMSICHT-Wissenschaftspreis prämiert der Förderverein des Fraunhofer UMSICHT zum 14. Mal Menschen, die mit ihrer Arbeit diesen Diskurs ermöglichen.

Von regenerativen Energien, nachwachsenden Rohstoffen über innovative Werkstoffe, Wassertechnik bis zu Wissens- und Ressourcenmanagement – gemeinsam tragen sie zu einer zukunftsfähigen und nachhaltigen Welt bei. Grundvoraussetzung dafür ist ein gesellschaftlicher Diskurs, in dem neue Entwicklungen Aufmerksamkeit bekommen und verbreitet werden. Mit dem UMSICHT-Wissenschaftspreis prämiert der Förderverein des Fraunhofer UMSICHT zum 14. Mal Menschen, die mit ihrer Arbeit diesen Diskurs ermöglichen.

Klimawandel und globale Krisen zeigen es auf: Die Menschheit braucht Veränderungen. Veränderungen, die unseren Alltag direkt betreffen, setzen sich langfristig aber nur mit einer breiten gesellschaftlichen Akzeptanz durch – als Beispiele seien nachhaltige Agrarprodukte, Verpackungen, Mobilität oder Energie genannt. Gerade deshalb ist es so wichtig, den Diskurs über Innovationen und wissenschaftliche Errungenschaften zu stärken und so ein Vertrauen in diese aufzubauen. Dabei kann die Basis für den Diskurs verschiedene Formen haben: Während die einen Fortschritte in ihrer Disziplin erlangen und auf Fachebene kommunizieren, bereiten andere diese für die Allgemeinheit möglichst verständlich auf. Nur so kann die gesamte Gesellschaft an der Gestaltung einer nachhaltigen Zukunft teilhaben.

Kommunikation: Wissenschaft und Gesellschaft
Seit 2010 verleiht der UMSICHT-Förderverein den UMSICHT-Wissenschaftspreis und zeichnet Menschen aus, die Forschungsergebnissen aus den Bereichen Umwelt-, Verfahrens- und Energietechnik – den Kernthemen des Fraunhofer UMSICHT – der Gesellschaft zugänglich machen. Das Preisgeld verteilt sich auf einen mit 8000 Euro dotierten Preis in der Kategorie Wissenschaft und einen mit 2000 Euro dotierten Preis für journalistische Arbeiten.

Bewerbung
Sämtliche veröffentlichte Arbeiten sind zugelassen, die sich mit den Themen Umwelt-, Verfahrens- oder Energietechnik beschäftigen. Wissenschaftliche Arbeiten dürfen nicht älter als zwei Jahre, journalistische Arbeiten nicht älter als ein Jahr sein. Beide können auf Deutsch oder Englisch eingereicht werden. Bei Gemeinschaftsarbeiten ist darauf zu achten, dass die Haupt-Anteilsträgerin bzw. der Haupt-Anteilsträger die Arbeit einreicht.

Bewerbungsschluss ist der 28. Februar 2023.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

(c) Brückner / TEXCOM
from left to right: Ronaldo Huber (MAPEKO), Esteban Scigliano (TEXCOM) and Rodrigo Huber (MAPEKO) in front of one of the two new BRÜCKNER POWER-FRAME stenters
06.12.2022

TEXCOM started up BRÜCKNER POWER-FRAME stenters

TEXCOM has recently started up two new BRÜCKNER POWER-FRAME stenters for knitted fabric with eight compartments and lubrication-free vertical chain and direct gas heating. This is already the 5th BRÜCKNER line purchased by TEXCOM and the successful continuation of the cooperation with BRÜCKNER since 1979. The third member of this successful alliance is the commercial agency, MAPEKO, which has been active for BRÜCKNER for several decades and in the 3rd generation.

With 3 production plants, a commercial office and 6 sales stores distributed around the country, TEXCOM manufactures and distributes knitted fabrics for a highly demanded market, where sports, technical, fashion and workwear fabrics stand out. The company's own developments, such as Twintex, Polisap, Neodry, Sense, Texcom antibacterial, among other brands, are perfect for sports and leisure due to their technical attributes. The company attaches great importance to the fact that all processed materials have the appropriate current environmental certificate (Öko Tex Standard 100, BlueSign and ZDHC)and efficient as well as responsible chemicals are used.

TEXCOM has recently started up two new BRÜCKNER POWER-FRAME stenters for knitted fabric with eight compartments and lubrication-free vertical chain and direct gas heating. This is already the 5th BRÜCKNER line purchased by TEXCOM and the successful continuation of the cooperation with BRÜCKNER since 1979. The third member of this successful alliance is the commercial agency, MAPEKO, which has been active for BRÜCKNER for several decades and in the 3rd generation.

With 3 production plants, a commercial office and 6 sales stores distributed around the country, TEXCOM manufactures and distributes knitted fabrics for a highly demanded market, where sports, technical, fashion and workwear fabrics stand out. The company's own developments, such as Twintex, Polisap, Neodry, Sense, Texcom antibacterial, among other brands, are perfect for sports and leisure due to their technical attributes. The company attaches great importance to the fact that all processed materials have the appropriate current environmental certificate (Öko Tex Standard 100, BlueSign and ZDHC)and efficient as well as responsible chemicals are used.

With more than 100 circular knitting machines and a wide range of possibilities for rotary printing, sublimation, lamination as well as special finishes such as antibacterial or hydrophilic, TEXCOM produces premium sports and leisure wear. This includes the official jersey of Argentina's national soccer team.

More information:
TEXCOM Brückner stenters
Source:

Brückner Trockentechnik GmbH & Co. KG

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

(c) BRÜCKNER
The project team of BRÜCKNER and HEATHCOAT in BRÜCKNER’s Technology Centre in Leonberg
04.10.2022

BRÜCKNER: New finishing line for British company HEATHCOAT FABRICS

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

The direct gas heated BRÜCKNER POWER-FRAME stenter with its staggered heating source arrangement every half zone provides best available temperature consistency across the length and the width of the stenter. The unit is equipped with a low-lub, horizontally returning combined pin / clip chain and several fabric paths, especially designed for the different fabrics being processed. Together with HEATHCOAT FABRICS technologists, the BRÜCKNER design team developed a special delivery end of the stenter with different edge trimming and slitting possibilities. Depending on the kind of products, the fabrics can be batched on large diameter A-frames, wound on cardboard tubes or plaited into trolleys.

Source:

Brückner Trockentechnik GmbH & Co. KG

(c) Fraunhofer IAP
Faserverstärktes Monomaterialkomposit aus PLA
28.07.2022

Fraunhofer CCPE: Technische Produktinnovationen für eine zirkuläre Kunststoffwirtschaft

Ziel des Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE ist es, die Wertschöpfungskette Kunststoff zirkulär zu gestalten. Sechs Fraunhofer-Institute erforschen am Beispiel Kunststoff, wie der Wandel von einer linearen zur einer zirkulären Kunststoffwirtschaft gelingen kann. Auf der ACHEMA in Frankfurt, der internationalen Messe für die Prozessindustrie, stellt das Fraunhofer CCPE vom 22. bis zum 26. August zwei technische Produktinnovationen und ein Bewertungstool für Unternehmen der Circular Economy vor.

Seit 2018 erforschen die sechs Fraunhofer-Institute — IAP, ICT, IML, LBF, IVV und UMSICHT – wie eine nachhaltige Transformation einer gesamten Wertschöpfungskette unter Prinzipien der Circular Economy erfolgen kann. Durch einen Multi-Stakeholder-Ansatz können FuE-Kompetenzen gebündelt werden, um Produkte zirkulär zu gestalten, passende Geschäftsmodelle zu entwickeln und End-of-Life Verluste bei Kunststoffabfällen zu reduzieren. Auf der ACHEMA werden die folgenden Projekte ausgestellt:

Ziel des Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE ist es, die Wertschöpfungskette Kunststoff zirkulär zu gestalten. Sechs Fraunhofer-Institute erforschen am Beispiel Kunststoff, wie der Wandel von einer linearen zur einer zirkulären Kunststoffwirtschaft gelingen kann. Auf der ACHEMA in Frankfurt, der internationalen Messe für die Prozessindustrie, stellt das Fraunhofer CCPE vom 22. bis zum 26. August zwei technische Produktinnovationen und ein Bewertungstool für Unternehmen der Circular Economy vor.

Seit 2018 erforschen die sechs Fraunhofer-Institute — IAP, ICT, IML, LBF, IVV und UMSICHT – wie eine nachhaltige Transformation einer gesamten Wertschöpfungskette unter Prinzipien der Circular Economy erfolgen kann. Durch einen Multi-Stakeholder-Ansatz können FuE-Kompetenzen gebündelt werden, um Produkte zirkulär zu gestalten, passende Geschäftsmodelle zu entwickeln und End-of-Life Verluste bei Kunststoffabfällen zu reduzieren. Auf der ACHEMA werden die folgenden Projekte ausgestellt:

  • Faserverstärktes Monomaterialkomposit aus PLA
    Biobasierte Kunststoffe werden zunehmend für technisch anspruchsvolle Einsatzbereiche z.B. in der Automobil- und Textilindustrie nachgefragt. Zwei zentrale Anforderungen sind dabei ihre Stabilität und ihre Recyclingfähigkeit. Forschende der Fraunhofer-Institute IAP und ICT entwickelten innovative PLA-basierte Monomaterial-Komposite (Organobleche), die technische Applikationen adressieren und insbesondere mit Hinblick auf die Rezyklisierbarkeit einen Beitrag zur Umsetzung der Sustainable Development Goals der UN leisten können.
  • Optisch und mechanisch verbesserte Folienrezyklate
    Bei der Herstellung von Folien zählt neben den mechanischen Eigenschaften besonders der visuelle Eindruck. Es dürfen keine Fehlstellen in Form von Stippen, Fischaugen oder Abrissen auftreten, die insbesondere bei Verwendung von Rezyklaten zu Problemen führen können. Die direkte Verwendung eines Folienregranulats führt jedoch häufig zu vielen Abrissen während der Folienherstellung, die zudem fatale Auswirkungen auf die mechanischen Materialeigenschaften haben. Durch die Zugabe einer geeigneten Additivformulierung konnte die Folienqualität nun signifikant verbessert werden.

Ist ein Produkt reif für die Circular Economy?
Weiterhin präsentieren die Forschenden nun auf der ACHEMA das webbasierte Tool CRL®, mit dem Unternehmen den Reifegrad von Produkten oder Produktsystemen im Hinblick auf die Circular Economy selbst bewerten können. Es prüft, inwieweit ein Produkt die Strategien der Kreislaufwirtschaft in den Bereichen Produktdesign, Produktdienstleistungssystem, End-of-Life-Management und Kreislaufwirtschaft bereits berücksichtigt und wo noch Verbesserungspotenzial besteht.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG