From the Sector

Reset
167 results
29.04.2021

NCTO: Kim Glas testifies on Supply Chain Resiliency

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas is testifying on “Supply Chain Resiliency and the Role of Small Manufacturers” before the Small Business Committee’s Subcommittee on Economic Growth, Tax, and Capital Access.
 
In written testimony submitted to the committee, Glas provides an overview of the incredible resiliency of the U.S. textile industry during the COVID-19 pandemic, the impact of the ensuing economic crisis, existing options available to small manufacturers to access capital, and policy recommendations to strengthen the entire industry domestic supply chain.

“One silver lining associated with the immense challenges posed by the COVID-19 crisis is that it afforded the domestic textile industry an opportunity to demonstrate its enormous resiliency, flexibility, and overall value to the U.S. economy,” Glas says in the testimony. “Despite the fact that there was virtually no [full] U.S. production of textile-based PPE prior to the pandemic, the heroic actions of domestic textile manufacturers resulted in the ability to supply homegrown PPE at the height of the greatest healthcare emergency our country has faced in the past 100 years.”

“As we exit the current crisis, rational federal policies are once again needed to ensure a stable overall environment where small businesses can compete and thrive, and targeted initiatives are required to ensure that domestic supply chains for critical materials, such as PPE, exist in the United States,” Glas notes.

Glas details five key policy recommendations supported by 20 trade associations and labor groups, representing the entire domestic supply chain aimed at strengthening the integrated U.S. textile sector:

  • Strengthen Buy American procurement rules
  • Provide funding assistance for companies to reconstitute domestic supply chains important to U.S. national and healthcare security
  • Key contracting reforms
  • Streamline the SBA loan application process
  • Provide additional funding for workforce training

Please view the full written testimony by NCTO President and CEO Kim Glas here.

22.04.2021

Sanitized® T 99-19: 99.84 % protection against SARS CoV-2 on textiles

The antimicrobial protection of Sanitized® T 99-19 against the SARS-CoV-2 virus has been confirmed by independent labs in France (basis: ISO 18184:2019).

Textile and polymer products with Sanitized® antimicrobial treatment have been used in hygiene-sensitive areas for many years. For textiles, Sanitized® T 99-19 is a patented technology based on a silane-ammonia compound, a globally proven product. Its hygiene function is used in workwear and protective clothing for nursing staff, bed linen or mattresses in hotels, nursing care facilities and hospitals. Polyester goods for precisely these areas of application can now not only be antimicrobial, but also reliably protective against SARS CoV-2.

The antiviral efficacy (99.84 %) of the Sanitized® T 99-19 product has been officially confirmed by tests conducted by external labs.

The antimicrobial protection of Sanitized® T 99-19 against the SARS-CoV-2 virus has been confirmed by independent labs in France (basis: ISO 18184:2019).

Textile and polymer products with Sanitized® antimicrobial treatment have been used in hygiene-sensitive areas for many years. For textiles, Sanitized® T 99-19 is a patented technology based on a silane-ammonia compound, a globally proven product. Its hygiene function is used in workwear and protective clothing for nursing staff, bed linen or mattresses in hotels, nursing care facilities and hospitals. Polyester goods for precisely these areas of application can now not only be antimicrobial, but also reliably protective against SARS CoV-2.

The antiviral efficacy (99.84 %) of the Sanitized® T 99-19 product has been officially confirmed by tests conducted by external labs.

Tests on end products, which were additionally carried out by textile manufacturers, also prove the effectiveness of Sanitized® T 99-19 against SARS CoV-2. License partners praise this confidence-building benefit of the end products. SANITIZED license partners receive concrete support in terms of marketing and legal aspects (health claims).

Avoid legal pitfalls when claiming antiviral protection
Advice and support for customers in achieving optimal hygiene protection for their products are an integral part of SANITIZED services. A claim guide has therefore been developed especially for products that protect against COVID-19.
https://www.sanitized.com/de/protection-against-covid-19-which-antiviral-advertising-claimsare-legal-sanitized-explains/

Source:

SANITIZED AG

AFFIX Labs/Franz Kiel GmbH: Anti-microbial coating for transportation industry (c) AFFIX Labs
22.04.2021

AFFIX Labs/Franz Kiel GmbH: Anti-microbial coating for transportation industry

AFFIX Labs’ durable semi-permanent surface coating Si-Quat, that is proven to kill 99.9% of bacteria and viruses, including SARS-COV-2, will be helping to make public transport safer as people around the world begin getting back onto buses and trains.

Si-Quat helps to prevent cross contamination with a durable layer of polymerized active ingredient that binds to walls, handles, furniture, and other key touch points, staying in place for up to 12 months and killing 99.9% of viruses and bacteria that come into contact with the treated surface. The coating has been tested and certified to be effective against bacteria, viruses, and fungi, and has passed the rigorous EN45545-2 HL3 flammability norm for trains and REG118.3 for busses.

Kiel has been manufacturing seating for public transport globally for more than 75 years and will be offering Si-Quat to clients as a new solution to protect travellers on their transport networks. With Si-Quat already registered on several continents a quick roll out is truly achievable.

AFFIX Labs’ durable semi-permanent surface coating Si-Quat, that is proven to kill 99.9% of bacteria and viruses, including SARS-COV-2, will be helping to make public transport safer as people around the world begin getting back onto buses and trains.

Si-Quat helps to prevent cross contamination with a durable layer of polymerized active ingredient that binds to walls, handles, furniture, and other key touch points, staying in place for up to 12 months and killing 99.9% of viruses and bacteria that come into contact with the treated surface. The coating has been tested and certified to be effective against bacteria, viruses, and fungi, and has passed the rigorous EN45545-2 HL3 flammability norm for trains and REG118.3 for busses.

Kiel has been manufacturing seating for public transport globally for more than 75 years and will be offering Si-Quat to clients as a new solution to protect travellers on their transport networks. With Si-Quat already registered on several continents a quick roll out is truly achievable.

Source:

EMG

21.04.2021

Lenzing: Outlook for current financial year raised

The Lenzing Group got off to a better-than-expected start to the financial year 2021, with preliminary EBITDA (earnings before interest, tax, depreciation and amortization) rising by 36.8 percent year-on-year to EUR 94.5 mn in the first quarter of 2021.

Despite the continuing high degree of volatility in the textile sector due to the COVID-19 pandemic, the Managing Board of the Lenzing Group raises its guidance for the 2021 financial year: The Lenzing Group expects the operating result to be at least at the level of the pre-crisis year 2019.

The results of the Lenzing Group for the 1st quarter of the current financial year will be published on Wednesday, May 05, 2021.

The Lenzing Group got off to a better-than-expected start to the financial year 2021, with preliminary EBITDA (earnings before interest, tax, depreciation and amortization) rising by 36.8 percent year-on-year to EUR 94.5 mn in the first quarter of 2021.

Despite the continuing high degree of volatility in the textile sector due to the COVID-19 pandemic, the Managing Board of the Lenzing Group raises its guidance for the 2021 financial year: The Lenzing Group expects the operating result to be at least at the level of the pre-crisis year 2019.

The results of the Lenzing Group for the 1st quarter of the current financial year will be published on Wednesday, May 05, 2021.

More information:
Lenzing AG Lenzing Group
Source:

Lenzing AG

Bunzl Distribution brings American antiviral technology to Mexico retailers
19.04.2021

Bunzl Distribution brings American antiviral technology to Mexico retailers

US-made Acteev Protect™ masks have embedded zinc ion technology which deactivates many viruses and eliminates bacteria

Bunzl Distribution, a leading supplier of packaging, disposable supplies, and cleaning and safety products, has signed on as the distributor in Mexico for Acteev Protect™ masks, made in the United States by polyamide manufacturer Ascend Performance Materials. A global distributor, Bunzl provides supplies to supermarkets, food processing plants, retailers and convenience stores in Mexico.

Bunzl will distribute the Acteev Protect Nonwoven Mask, a reusable general purpose mask that features powerful antiviral and antibacterial properties. Acteev technology embeds active zinc ions in a polymer matrix which destroys microbes, deactivates many viruses and eliminates bacteria and fungi.

US-made Acteev Protect™ masks have embedded zinc ion technology which deactivates many viruses and eliminates bacteria

Bunzl Distribution, a leading supplier of packaging, disposable supplies, and cleaning and safety products, has signed on as the distributor in Mexico for Acteev Protect™ masks, made in the United States by polyamide manufacturer Ascend Performance Materials. A global distributor, Bunzl provides supplies to supermarkets, food processing plants, retailers and convenience stores in Mexico.

Bunzl will distribute the Acteev Protect Nonwoven Mask, a reusable general purpose mask that features powerful antiviral and antibacterial properties. Acteev technology embeds active zinc ions in a polymer matrix which destroys microbes, deactivates many viruses and eliminates bacteria and fungi.

Recent testing on Acteev fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with greater than 99.9% efficacy. Ascend has submitted several masks designs to the U.S. Environmental Protection Agency and the U.S. Food and Drug Administration to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties in the United States.

Carlos Green, Director General of Bunzl de México, says the company is pleased to bring products featuring better safety and protection to the Mexico market. “Our customers are more focused than ever before on doing business safely, and Acteev masks offer an added level of protection in the workplace,” he said. “We’re excited to offer our customers this premium product that provides some of the best protection available.”

In addition to antiviral, antifungal and antibacterial protection, the washable, reusable masks are lightweight, breathable and odor-fighting, making them comfortable to wear during a long shift at work or for outdoor workout. “Workers in industrial settings, such as chemical and food processing plants, and convenience stores and other retail outlets deserve the right protection as they keep society and the economy moving in Mexico,” said Juan Toro, Ascend’s principal business development leader for Acteev in the Americas.

“We are proud to partner with Bunzl to help deliver a reusable mask that provides both antiviral properties as well as an opportunity reduce the number of masks consumed, saving the companies money.”
Acteev Protect shows promise for use beyond masks, according to Ascend. The technology was originally developed for workout wear, and now the company is working textile applications ranging from gloves to scrubs to high-end athleisure.

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

14.04.2021

PCMC adds virus-killing wet wipes machines to nonwovens lineup

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Source:

Barry-Wehmiller

Mimaki: 100 Percent Success in a Post Pandemic World (c) Mimaki
Mimaki UJV100-160
08.04.2021

Mimaki: 100 Percent Success in a Post Pandemic World

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

After a turbulent year, it seems strange to be thinking about ‘after the pandemic’, but with millions of vaccinations underway, the light at the end of the tunnel is visible. As we turn the corner, choosing technology partners that understand how to proactively respond to changing market needs and support the evolving requirements of print businesses and end customers will be vital. The printers in Mimaki’s ‘100 series’ portfolio, which consists of the high quality, high productivity entry level roll-to-roll inkjet printers the UJV100-160 UV and the JV100-160 solvent, and the high performance textile printer, the TS100-1600, are a perfect reflection of the way technology requirements are adapting in line with the industry as we look to the future. To demonstrate this, we have identified three post-pandemic technology touchpoints that will help print businesses target success amid uncertainty.

  • Productivity

The pandemic has served as a major catalyst for existing trends, and our growing appetite for everything on-demand has been given a huge COVID-related boost. For printers, a digital solution that offers premium productivity, quality and efficiency at an entry-level price point is sure to be an invaluable investment to meet evolving ‘on-demand demands’. Adding a digital production element to your business doesn’t need to be daunting, complicated or overpriced – the Mimaki ‘100 series’ truly lives up to the tagline ‘Expert Printing Made Easy’, offering an incredibly intuitive user experience for streamlined, ultra-efficient printing, high-quality output, and cost-effective implementation. The powerful and productive new textile printer in the ‘100 series’, the TS100-1600, is a shining example of equipment developed with the future of the market in mind – the textile industry is fast-paced and constantly innovating, and the printer you invest in needs to keep up with your creativity.

  • Diversity

2021 is set to be a period of transition. While that will mean navigating uncertainty, the ‘glass half full’ approach is to view the year ahead in terms of opportunities such as expanding your business, exploring alternative revenue streams, and taking the plunge into new markets. In the past, it may have felt as if the barriers to entry when it came to looking beyond your core business were too great. However, in a post-pandemic world, we need to break some of those barriers down and demonstrate that success with digital print is within reach if you invest in the right equipment. With the ‘100 series’ portfolio, Mimaki is acknowledging what print service providers need from their technology partners – the UJV100-160 and the JV100-160 are suitable for a wide range of applications that will allow you to easily and affordably diversify your offering, and with the TS100-1600 textile printer, it has never been easier to target growth in the thriving textile sector, even in challenging times.

  • Affordability

Affordability is one of the most significant barriers to entry into new markets. 2020 was a year of unprecedented economic challenges, so it’s more important than ever to be thinking about gaining a competitive edge, and the printers in the ‘100 series’ from Mimaki have been specifically formulated to help you ramp up productivity while keeping running costs low. Whether you want to take your first foray into digital print production, expand the services you offer or simply grow your customer base, cost can be a major sticking point, which is why supporting customers is Mimaki’s number one priority, designing the ‘100 series’ around your needs and continuing to listen to how those needs are developing. Making an investment in the JV100-160 in order to move into outdoor graphics; meeting demand for faster turnaround times by adding the instantly curable UJV100-160 to your production setup; or taking a leap into new revenue streams with the TS100-160 – it’s all ‘100’ percent accessible.

Source:

Martial Granet, Branch Manager, Mimaki France

07.04.2021

NCTO: Importance of the U.S. Textile Industry to Lifesaving PPE & the Economy

National Council of Textiles Organization (NCTO) member Parkdale Mills hosted Senator Tim Kaine (D-VA) at the company’s Magnolia Manufacturing plant in Hillsville, Va. today to showcase the critical role the company and the industry has played in producing lifesaving personal protective equipment (PPE) to aid frontline health-care workers and the country during the pandemic.

Parkdale’s facility in Hillsville, Va. is a key yarn spinning hub contributing to a major face mask initiative bringing together several U.S. companies and more than 5,000 workers as part of the Biden administration’s pledge to provide 25 million reusable face masks to communities hit hard by the pandemic.

National Council of Textiles Organization (NCTO) member Parkdale Mills hosted Senator Tim Kaine (D-VA) at the company’s Magnolia Manufacturing plant in Hillsville, Va. today to showcase the critical role the company and the industry has played in producing lifesaving personal protective equipment (PPE) to aid frontline health-care workers and the country during the pandemic.

Parkdale’s facility in Hillsville, Va. is a key yarn spinning hub contributing to a major face mask initiative bringing together several U.S. companies and more than 5,000 workers as part of the Biden administration’s pledge to provide 25 million reusable face masks to communities hit hard by the pandemic.

“Parkdale Mills thanks Senator Kaine for his leadership on policies that help bolster our company and the entire textile industry. We are proud to be part of an initiative that is bringing together American companies to produce 100% American-made masks for community health centers, soup kitchens and food banks across the country,” said Davis Warlick of Parkdale Mills. “With the support of our government and leaders like Senator Kaine, our industry is demonstrating its ability and capacity to make critical items here for the long term.”

Kim Glas, President and CEO of NCTO said: “We want to sincerely thank Senator Kaine for his leadership in supporting American manufacturers, which have played a vital role in our economy as well as the nationwide effort to produce critical PPE and medical textiles for a nation in crisis. We are grateful to the senator and the Biden administration for prioritizing domestic manufacturers and the U.S. workforce. The U.S. textile industry is a vital contributor to the U.S economy and policies that Senator Kaine supports help bolster the onshoring of PPE and critical items, which in turn spurs employment and investment in the American manufacturing base.”

DITF: SMART TEXTILES erstmals digital (c) DITF
Forschung an Handschuhen mit Drucksensoren für Logistik und Produktion.
31.03.2021

DITF: SMART TEXTILES erstmals digital

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Über den Anwendungsbereich Mobilität hinaus gibt es vor allem in Medizin und Pflege Bedarf an intelligenten Textilien. Sensorische Sohlen in den Schuhen analysieren den Gang und helfen damit Ärzten und Physiotherapeuten, die optimale Therapie auszuwählen - zum Beispiel gegen Rückenschmerzen. Taschentücher, Stofftaschen oder Handschuhe aus speziellen Silbertextilien töten Viren und Bakterien. Eine Innovation, die in der Corona-Pandemie besonders gefragt ist.

Neue Textilelektroden überleben inzwischen sogar viele
Waschgänge und machen smarte Textilien alltagstauglich. Das ist besonders wichtig bei Sportbekleidung, mit der auch Hobbysportler gerne ihr Training tracken, auswerten und optimieren. Neu entwickelte Stoffe haften großflächig am Körper und stellen auf diese Weise sicher, dass Vitalparameter zuverlässig erfasst werden.

Waschbar und leitfähig sind auch Druckknöpfe, die im wahrsten Sinne des Wortes Kontaktierung per Knopfdruck herstellen. In den robusten Knöpfen steckt Elektronik wie Sensoren, Aktoren, LEDs und Schalter.

Das Anwenderforum zeigte auch in diesem Jahr, dass viele Visionen inzwischen realisierbar und marktfähig sind. Herausforderungen sind in Zukunft, nachhaltige Materialien und Prozesse einzusetzen sowie die E-Textiles zu recyceln. Darüber hinaus stellt die Datenflut, die durch die smarten Textilien erzeugt werden kann, hohe Ansprüche an die Sicherheit und die Verarbeitung der Daten.

Das Anwenderforum SMART TEXTILES wird jährlich von den Deutschen Instituten für Textil- und Faserforschung Denkendorf (DITF), dem Forschungskuratorium Textil e. V. in Berlin und dem Textilforschungsinstitut Thüringen Vogtland e. V. (TITV) in Greiz veranstaltet, um den Austausch von Industrie und Wissenschaft in der in der D-A-CH-Region zu fördern.

Das 10. Anwenderforum SMART TEXTILES findet vom 2.-3. März 2022 statt und ist wieder als Präsenzveranstaltung kombiniert mit einer Firmenbesichtigung geplant. Der Veranstaltungsort wird rechtzeitig bekanntgegeben.

Source:

DITF

25.03.2021

Autoneum Holding AG Annual General Meeting

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements 2020. In view of the net loss in the 2020 financial year, the Board of Directors proposed forgoing dividend payments, which was approved by a large majority of the shareholders. Hans-Peter Schwald, Chairman of the Board of Directors, said: “2020 was extremely challenging for the entire automobile industry and also for Autoneum. The pandemic-related drop in revenue has impacted profitability. Despite the net loss, Autoneum reached important financial improvements in 2020. We expect to return to profitability in 2021 and our aim to distribute at least 30% of the net profit attributable to Autoneum shareholders as dividends remains unchanged. The Board of Directors, the Group Executive Board and the Company as a whole are committed fully to ensuring that Autoneum continues to make significant operational and financial improvements.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider and Ferdinand Stutz were confirmed in office. Newly elected to the Board of Directors were Liane Hirner and Oliver Streuli.

With Liane Hirner and Oliver Streuli and the resignation of Peter Spuhler, who did not stand for reelection in order to be able to focus on managing Stadler Rail, the Board of Directors of Autoneum Holding Ltd has expanded from seven to eight members. Hans-Peter Schwald explained: “The expertise of Liane Hirner and Oliver Streuli in the areas of finance and corporate management is of great value to Autoneum. As the Board of Directors, we look forward to this enhancement to the Board and to working with both of them.”

Peter Spuhler has been an important driving force since the Company became independent, he played a major role in shaping Autoneum thanks to his entrepreneurial expertise and showed great commitment to the Company. The Board of Directors thanks him sincerely and wishes him continued success.

This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were re-elected to the Compensation Committee. Oliver Streuli was elected as a new member of this committee. In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Board of Directors and the Group Executive Board with a large majority.

The consultative vote on the 2020 remuneration report was approved by 83.4%. Due to the severe impact of the coronavirus pandemic on the Group’s business development, the members of the Board of Directors renounced half of their compensation for the 2020 financial year and, in order to  align their remuneration with shareholder interests, decided to receive it entirely in Autoneum shares. In addition, a waiver of salary amounting to 10% of the basic salary for a period of three months was agreed upon with the senior management as part of a reduction of personnel costs.

The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2022 financial year as well as the other proposals were also approved by a large majority.

Source:

Autoneum Management AG

IFFT/Interior Lifestyle Living set for a highly anticipated return in October 2021 (c) Messe Frankfurt
IFFT/Interior Lifestyle Living 2019
24.03.2021

IFFT/Interior Lifestyle Living set for a highly anticipated return in October 2021

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand

The dates are set: IFFT/Interior Lifestyle Living is welcoming exhibitor registration for its 2021 edition, to be held from 18 – 20 October 2021 in the South Halls of Tokyo Big Sight. The dedicated fair for interior design is once again set to attract not only retail buyers but also visitors from design and architecture offices, commercial facilities, and other contract businesses. The 2019 edition welcomed 352 exhibitors from 14 countries and regions as well as 16,016 visitors from 34 countries and regions, receiving much positive feedback for its increased focus on contract business.
 
IFFT/Interior Lifestyle Living 2019
Returning after a hiatus in 2020 due to the COVID-19 pandemic, IFFT/Interior Lifestyle Living will once again create opportunities for exhibitors to meet new clients and expand their businesses. Messe Frankfurt Japan Ltd is working to put all of the appropriate safety and hygiene measures in place to protect participants during the fair period, and prevent the spread of COVID-19.
 
New ETHICAL zone added to satisfy consumer demand
A newly introduced ETHICAL zone will help industry players explore the themes of sustainability and ecology, which are continuing to gain traction in the interior design market. The zone focuses on environmental protection, up-cycling, fair trade, products that support people with disabilities, organic products, local production for local consumption, and more. Furniture production from recycled forest materials will also be a focus of the zone, which will be promoted in the run up to the fair through sector-specific media channels. This will include dedicated promotional activities targeting ethically driven retailers and restaurants.
 
A variety of booth sizes to accommodate exhibitors’ needs
In response to requests from exhibitors who showcase smaller items, a new booth size has been added for 2021. Measuring 6.3 sqm (width 3m x depth 2.1m), the new booth option is one size smaller than the existing 9 sqm booth, adding more choice for exhibitors
 
Dedicated lifestyle themed zones
Proving popular amongst trade buyers during previous editions, ‘CREATIVE RESOURCE’ is a zone devoted to innovative interior materials, as well as parts and services for interior design and home remodelling. Products featured at the zone include wallpaper, floor coverings, paints and related materials. First introduced in 2012, the zone has grown in stature as the destination for the likes of manufacturers, architects, designers and developers to find inspiration.
 
The fair’s zoning encompasses a variety of different product categories and themes. This not only simplifies the sourcing process for trade buyers, but it also maximises business exposure for exhibitors. Day-to-day lifestyle products – both stylish and functional – will be displayed in the ‘HOME’, ‘ACCENT’ and ‘EVERYDAY’ zones with a focus on living spaces, accessories and household items respectively.
 
Moreover, catering to the world of convenience and home cuisine, an array of pragmatically-designed packaged food will be presented at 'FOODIST', while innovative dining items will be gathered at the ‘KITCHEN LIFE’ zone.
 
Highlighting high quality local craftsmanship, designs from Japanese artisanal artists with a modern touch will be located in the ‘JAPAN STYLE’ zone. The latest designs from highly acclaimed international brands will be displayed too, in the ‘MOVEMENT’ area, while work from up-and-coming young designers will appear at the ‘TALENTS’ and ‘NEXT’ zones.
 
About IFFT/Interior Lifestyle Living
IFFT/Interior Lifestyle Living is held annually in fall and is the sister fair of Interior Lifestyle Tokyo held in spring, which is based on Ambiente, Messe Frankfurt’s largest and most important international consumer goods fair, and Heimtextil, the biggest international home and contract textiles fair. With the synergetic effects of these leading global trade fairs in the high-end interior market, and with Messe Frankfurt’s global network, IFFT/Interior Lifestyle Living is a key platform for professionals, buyers, architects and those engaged in domestic and international contract business.

Baldwin receives three FlexoCleanerBrush™ orders in 30 days (c) Baldwin Technology
Baldwin’s three new FlexoCleanerBrush installations are located in Bevaria (Germany), Michigan (US) and Florida (US). The Florida order was secured in partnership with local agent Technoflex in South Carolina (US).
23.03.2021

Baldwin receives three FlexoCleanerBrush™ orders in 30 days

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

“With two of the recent orders, the customers had already installed the FlexoCleanerBrush in other locations. One of them reported as much as a 30 percent production capacity increase, thanks to the  installation,” said Lee Simmonds, Regional Sales Manager at Baldwin. “Both customers have experienced insufficient results with their original traversing cloth cleaning systems, which will now be removed and replaced with the full-width, stand-alone, automated FlexoCleanerBrush technology from Baldwin.”

Improving sustainability is one of the key drivers for investments in the corrugated printing industry. The FlexoCleanerBrush dramatically cuts water waste by cleaning plates more efficiently. In a recent independent study that was conducted to validate the capacity of the automated system, the FlexoCleanerBrush could fully clean and dry all printing plates in less than four minutes and pick hickeys in seconds.

Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plateracking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

Source:

Baldwin Technology

11.03.2021

Lenzing Group weathers the crisis year 2020 and remains strategically well on track

  • Successful implementation of measures to fight the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects progressing on schedule – financing contracts for the construction of the pulp plant in Brazil concluded according to plan
  • Lenzing expands its lead in sustainability and circular economy – first TENCEL™ branded carbon-zero fibers launched
  • Successful issuance of a EUR 500 mn hybrid bond further strengthens balance sheet structure
  • Lenzing expects recovery of the fiber market to continue in 2021 and an operating result on pre-crisis level

Lenzing – In 2020, the Lenzing Group successfully responded to the extremely difficult market environment due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The measures focused on protecting Lenzing’s employees and partners and on safeguarding its operations.

  • Successful implementation of measures to fight the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects progressing on schedule – financing contracts for the construction of the pulp plant in Brazil concluded according to plan
  • Lenzing expands its lead in sustainability and circular economy – first TENCEL™ branded carbon-zero fibers launched
  • Successful issuance of a EUR 500 mn hybrid bond further strengthens balance sheet structure
  • Lenzing expects recovery of the fiber market to continue in 2021 and an operating result on pre-crisis level

Lenzing – In 2020, the Lenzing Group successfully responded to the extremely difficult market environment due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The measures focused on protecting Lenzing’s employees and partners and on safeguarding its operations. Lenzing flexibly adjusted production volumes and was able to offer its customers the usual delivery service at any time. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs.

Please read the attached document for more information.

More information:
Lenzing Group Covid-19
Source:

Lenzing Aktiengesellschaft

DTV: Coronaviren noch bis zu drei Tage auf Textilien infektiös © DTV
MyClean
09.03.2021

DTV: Coronaviren noch bis zu drei Tage auf Textilien infektiös

Britische Universität untersuchte Coronaviren auf Textilien

Im Rahmen einer Studie zur Wirksamkeit von Waschverfahren untersuchte die De Montfort University (DMU) aus Leicester, England die Überlebensfähigkeit von Coronaviren auf Textilien. Der getestete Modell-Coronavirus-Stamm blieb mindestens 72 Stunden lang auf Polyestergewebe und 24 Stunden auf 100% Baumwolle infektiös. Auch wenn die Viren sich durch gängige Waschmittel und entsprechende Temperaturen inaktivieren ließen, warnt der Deutsche Textileinigungs-Verband (DTV) davor, potenziell infektiöse Textilien im häuslichen Umfeld zu waschen. Denn kritische Punkte wie Wäschesortierung, Maschinenbeladung und Kontaminationsmöglichkeiten lassen sich im professionellen Textilservice in einer kontrollierten Umgebung handhaben.

Britische Universität untersuchte Coronaviren auf Textilien

Im Rahmen einer Studie zur Wirksamkeit von Waschverfahren untersuchte die De Montfort University (DMU) aus Leicester, England die Überlebensfähigkeit von Coronaviren auf Textilien. Der getestete Modell-Coronavirus-Stamm blieb mindestens 72 Stunden lang auf Polyestergewebe und 24 Stunden auf 100% Baumwolle infektiös. Auch wenn die Viren sich durch gängige Waschmittel und entsprechende Temperaturen inaktivieren ließen, warnt der Deutsche Textileinigungs-Verband (DTV) davor, potenziell infektiöse Textilien im häuslichen Umfeld zu waschen. Denn kritische Punkte wie Wäschesortierung, Maschinenbeladung und Kontaminationsmöglichkeiten lassen sich im professionellen Textilservice in einer kontrollierten Umgebung handhaben.

Der anhaltende Ausbruch von SARS-CoV-2 hat die Textilhygiene in vielen Bereichen – vom Gesundheits- und Pflegewesen, über die Gastronomie und Hotellerie bis hin zum Privatkundenbereich – in den Fokus rücken lassen. Die De Montfort University aus Leicester, England hat vor diesem Hintergrund die Überlebensfähigkeit des humanen Coronavirus OC43 (HCoV-OC43), das eine ähnliche Gesamtstruktur wie SARS-CoV-2 aufweist, auf Textilien untersucht und auch Waschverfahren für eine zuverlässige Inaktivierung des Virus geprüft.

Die Leiterin der DMU-Studie, Dr. Katie Laird, fasste die Ergebnisse der Studie zusammen: „Der getestete Coronavirus-Stamm (HCoV-OC43) blieb mindestens 72 Stunden lang auf Polyestergewebe und 24 Stunden auf 100% Baumwolle infektiös.“ Laird ergänzt zudem, dass sich das Virus bis zu 72 Stunden lang von Polyestergewebe auf andere Oberflächen übertragen lässt, was darauf hindeutet, dass Textilien ein gewisses Übertragungsrisiko darstellen können.

Gängige Waschverfahren sind effektiv – Ein Risiko besteht jedoch bei begleitenden Prozessen

Das Forscherteam fand heraus, dass nahezu alle Haushaltswaschvorgänge, möglicherweise mit Ausnahme der Niedrigtemperatur-Haushaltswäsche, das durch Coronavirus verursachte Infektionsrisiko effektiv beseitigen. Wichtig ist jedoch die richtige Kombination von Bewegung, Temperatur und Waschmittel. In diesen Fällen wurde bei Waschverfahren von 40 °C und darüber keine Spur des Virus mehr gefunden.

Andreas Schumacher, Geschäftsführer des Deutschen Textilreinigungs-Verbandes (DTV), mahnt jedoch: „Kleidung, die möglicherweise noch für drei Tage kontaminiert ist, sollte im besten Falle das häusliche Umfeld gar nicht erst erreichen. Mit Coronaviren belastete Textilien sollten in einer kontrollierten Umgebung wie dem Textilservice behandelt werden. Dort wird verschmutzte Wäsche sicher gehandhabt.“ Denn im häuslichen Umfeld wird die verschmutzte Wäsche zwangsweise mehrfach vor dem eigentlichen Waschprozess in die Hand genommen, für schmutzige und saubere Wäsche oft der gleiche Wäschekorb verwendet oder die Waschmaschine selbst steht möglicherweise in der Küche neben dem Herd oder der Spülmaschine, woraus sich noch gänzlich andere Möglichkeiten zur Kreuzkontamination ergeben, so Schumacher.

„Insbesondere Textilien aus dem Gesundheits- und Pflegewesen sowie Berufskleidung im Allgemeinen sollte nicht zuhause gewaschen werden, um eine Übertragung von Krankheitserregern auf Familie und Patienten zu vermeiden“, erläutert Schumacher. „Ergänzend zu den Ergebnissen der britischen Studie sollte darauf hingewiesen werden, dass handelsübliche Haushalts-Waschmaschinen im Gegensatz zu Profimaschinen an neuralgischen Punkten, wie Pumpe, Schublade oder zwischen Gummi und Waschmaschinenfenster die Temperaturen für eine sichere Virusinaktivierung häufig nicht erreichen. Dies kann bei Be- und Entladen der heimischen Waschmaschine zu einer Rekontamination führen“, so Schumacher weiter.

Für den Hotellerie und Gastronomiebereich sieht der DTV keinen Grund, Tischdecken und Servietten aus Stoff durch Papierlösungen zu ersetzen. Tatsächlich bietet hygienisch aufbereitete Tischwäsche bei regelmäßigem Wechsel einen deutlichen Hygienevorteil. Darüber hinaus sprechen auch Gründe des Umweltschutzes und der Ressourcenschonung für die Textillösung.

Hintergrund: Die Forschung wird derzeit einem Peer-Review unterzogen und wird voraussichtlich in den nächsten Monaten in einem Open-Access-Journal veröffentlicht, damit jeder vollständig auf die Forschung zugreifen kann. Auftraggeber der Studie waren Textilpflegeverbände aus England, den Vereinigten Staaten, Schweiz, Belgien, Finnland, Norwegen und Deutschland.

Source:

Deutschen Textilreinigungs-Verband

09.03.2021

Rieter Financial Year 2020

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Business Groups
Sales of the Business Group Machines & Systems amounted to CHF 295.8 million in 2020, which corresponds to a decrease of 24% compared to the previous year. Due to the low volume and taking into account the expenditure on the ongoing innovation program, the business group recorded a loss of CHF 72.4 million at the EBIT level. Order intake in the reporting year was CHF 363.9 million (-35% compared to the previous year).

The Business Group Components with sales of CHF 174.3 million (-24% compared to the previous year) achieved a profit of CHF 1.4 million at the EBIT level before restructuring charges. EBIT after restructuring charges was CHF -5.5 million. The order intake with CHF 169.1 million (-24% compared to the previous year) was just below sales.

The Business Group After Sales achieved sales of CHF 102.9 million (-27% compared to the previous year) and a positive EBIT of CHF 1.8 million. Order intake was CHF 107.2 million (-24% compared to the previous year). Over 60% of spinning mills were shut down in the second quarter of 2020, with a corresponding impact on the demand for spare parts.

Dividend
Due to the loss of CHF 89.8 million at the net profit level in the 2020 financial year, the Board of Directors proposes that shareholders waive the distribution of a dividend.

Outlook
Rieter expects the market recovery that began in the second half of 2020 to continue in 2021. The company expects an order intake in the first half of 2021 exceeding that of the previous half year (second half of 2020: CHF 389.5 million). Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nonetheless, as already announced, Rieter still anticipates that sales in the first half of 2021 will be below the break-even point. In connection with the high order backlog at the beginning of 2021, Rieter expects an operating profit for the full year 2021.

Source:

Rieter Management AG

05.03.2021

ITM Exhibition postponed to 14-18 June 2022

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

04.03.2021

BVMed: Verlängerung der Pflegehilfsmittel-Pauschale

Der Bundesverband Medizintechnologie, BVMed, sieht die vom Bundestag mit dem EpiLage-Fortgeltungsgesetz beschlossene Verlängerung der erhöhten monatlichen Pflegehilfsmittel-Pauschale als „ersten Schritt“. Die Erhöhung der Pauschale von 40 auf 60 Euro gilt damit zunächst bis Ende 2021 weiter. Der BVMed setzt sich weiterhin für eine dauerhafte Erhöhung der Pflegehilfsmittel-Pauschale ein, da von einer langfristigen Erhöhung der Kosten beispielsweise für Hygienemaßnahmen ausgegangen werden kann. „Im nächsten Schritt muss die Befristung aufgehoben werden. Wir müssen die gestiegenen Kosten langfristig finanzieren, um die Pflegebedürftigen und die Pflegenden besser zu schützen“, so BVMed-Geschäftsführer Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie, BVMed, sieht die vom Bundestag mit dem EpiLage-Fortgeltungsgesetz beschlossene Verlängerung der erhöhten monatlichen Pflegehilfsmittel-Pauschale als „ersten Schritt“. Die Erhöhung der Pauschale von 40 auf 60 Euro gilt damit zunächst bis Ende 2021 weiter. Der BVMed setzt sich weiterhin für eine dauerhafte Erhöhung der Pflegehilfsmittel-Pauschale ein, da von einer langfristigen Erhöhung der Kosten beispielsweise für Hygienemaßnahmen ausgegangen werden kann. „Im nächsten Schritt muss die Befristung aufgehoben werden. Wir müssen die gestiegenen Kosten langfristig finanzieren, um die Pflegebedürftigen und die Pflegenden besser zu schützen“, so BVMed-Geschäftsführer Dr. Marc-Pierre Möll.

Nach Ansicht des BVMed gibt es mit dem gestiegenen Hygienebewusstsein bei pflegenden Angehörigen und dem Pflegepersonal sowie gestiegenen Preisen für Desinfektionsmittel oder Schutzausrüstung „gute Gründe für die dauerhafte Anhebung der Pflegehilfsmittel-Pauschale“. Bei den Pflegehilfsmitteln handelt es sich beispielsweise um Desinfektionsmittel, Schutzhandschuhe, Schutzausrüstung und weitere Hygieneartikel, „die im Rahmen des Schutzes vor Infektionsgefahren gerade für die vulnerable Gruppe der Pflegebedürftigen und zum Schutz des Pflegepersonals und der pflegenden Angehörigen besonders benötigt werden“, so der BVMed.

Der Bundestag hatte im letzten Jahr aufgrund des erhöhten Bedarfs nach diesen Produkten bei stark steigenden Kosten die Erhöhung dieser Pauschale von 40 auf 60 Euro im Zuge der epidemischen Lage beschlossen. „Die Verlängerung dieser Regelung trägt angesichts der anhaltenden Corona-Pandemie auch den Belastungen der zu Pflegenden sowie der Pflegekräfte Rechnung“, so der deutsche Medizintechnik-Verband. Außerdem sind nach wie vor eine stark erhöhte Nachfrage sowie höhere Preise in diesen Produktsegmenten festzustellen. „Wir gehen auch langfristig aufgrund des weltweiten Bedarfes nicht von einer Reduktion aus. Die Politik darf die Pflegebedürftigen und die Pflegenden hier nicht im Stich lassen“, appelliert BVMed-Geschäftsführer Möll.

03.03.2021

JEC WORLD 2021 postponed

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

Source:

JEC Group

04.02.2021

DFD Januar/Februar 2021: Verlässliche Anlaufstelle für Einkäufer

Trotz des harten Lockdowns fanden in Düsseldorf in der vergangenen Woche die Kollektionssichtung und Order der Fall/Winter-Kollektion 2021 im Rahmen der Düsseldorf Fashion Days statt. Dank strenger Hygiene-Auflagen und starker Entzerrung des Orderaufkommens durch die Vergabe von Einzelterminen. In über 600 Showrooms platzierten Einkäufer aus ganz Deutschland ihre Order. Die Supreme Women&Men stellte temporäre Showroom-Flächen für ihre Partner zur Verfügung, während die Gallery FASHION & Shoes als rein digitales Format stattfand. Die Bilanz: Die Frequenz war erwartungsgemäß niedriger als vor der Pandemie, dennoch schätzt die Branche die Verlässlichkeit des Orderstandortes Düsseldorf sowie den persönlichen Austausch vor Ort.

Trotz des harten Lockdowns fanden in Düsseldorf in der vergangenen Woche die Kollektionssichtung und Order der Fall/Winter-Kollektion 2021 im Rahmen der Düsseldorf Fashion Days statt. Dank strenger Hygiene-Auflagen und starker Entzerrung des Orderaufkommens durch die Vergabe von Einzelterminen. In über 600 Showrooms platzierten Einkäufer aus ganz Deutschland ihre Order. Die Supreme Women&Men stellte temporäre Showroom-Flächen für ihre Partner zur Verfügung, während die Gallery FASHION & Shoes als rein digitales Format stattfand. Die Bilanz: Die Frequenz war erwartungsgemäß niedriger als vor der Pandemie, dennoch schätzt die Branche die Verlässlichkeit des Orderstandortes Düsseldorf sowie den persönlichen Austausch vor Ort.

„Dass die Düsseldorf Fashion Days stattfinden konnten, ist ein wichtiges Signal für die gesamte Branche und unterstreicht die Relevanz des Modestandortes. Der neue Name DFD kommt zudem beim Fachpublikum sehr gut an. Unter dem Dachbegriff DFD lassen sich das Fashion-Business sowie branchenübergreifende neue Konzepte perfekt vereinen. Diese Entwicklung fokussieren wir von städtischer Seite: Mit einem geplanten Festival-Konzept zur Sommerausgabe wird nicht nur das Orderbusiness gestärkt, sondern die gesamte Stadt inklusive Einzelhandel, Gastronomie, Kultur- und Eventbranche profitiert von der neuen Ausrichtung der Ordertage", erklärt Theresa Winkels, Leiterin der Wirtschaftsförderung Düsseldorf.

„Aufgrund der gegenwärtigen Situation sind wir in dieser Orderrunde ganz anders präsent: Digital und mit erweiterter Laufzeit vom 28. Januar bis 15. Februar 2021. Eine völlig neue Erfahrung, die wir jedoch sehr wertschätzen, weil wir uns damit neue Vertriebskanäle und eine erweiterte Präsenz für die Gallery-Formate geschaffen haben. Somit sind in Zukunft auch Hybridformate denkbar. Unser Wirkungskreis ist dadurch flexibler geworden. Mit ‚Gallery FASHION & Shoes digital‘ haben wir uns vollständig als Teil der DFD gefühlt, freuen uns aber dennoch auf die kommende Präsenzveranstaltung Gallery SHOES & Fashion vom 18. bis 20. April 2021 mit begleitendem Showroom Concept“, sagt Ulrike Kähler, Managing Director Igedo Company.