From the Sector

Reset
466 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

(c) TMAS
25.03.2024

TMAS: Microfactory for filter bags in Sweden

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

Filter bags are employed in a wide range of industrial processes and while they may be largely under the radar as products, they represent a pretty significant percentage of overall technical textiles production.
They are used in foundries, smelters, incinerators, asphalt plants and energy production plants. Other key manufacturing fields – often where dust is generated – include the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

As a further example of the scale of the industry and the high volumes of fabrics involved, one supplier has delivered a single order of 30,000 filter bags to be used for flue gas cleaning at a European power plant. The bags can also be anywhere up to twelve metres in length and frequently have to be replaced.

Source:

Textile Machinery Association of Sweden

25.03.2024

Texhibition Istanbul: Fifth edition successfully concluded

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

In addition to well-known companies such as Almodo, Bahariye, BTD, Can Textile, Iskur, Kipaş, Menderes, Söktaş, Yünsa, Zorlu, İpeker a large number of other export-oriented companies from the segments of textiles (woven fabrics, knitting) presented their latest designs and products.

Visitors
25,752 visitors came from over 112 countries, 41.8% from the European Union (including Germany, Italy, the Netherlands, Spain, Romania etc.) and Great Britain, Ukraine,26.5% from Asia (including Russia etc.), 14.8% from the Middle East (including Jordan, United Arab Emirates, Saudi Arabia) 10.7% from North Africa (including Algeria, Tunisia etc.), 3.1% from North America (United States, Canada), 3.1% from South America and other countries.

American buyers from the USA and Canada in particular, but also a large number of Mexican and Colombian buyers took advantage of the numerous match-making opportunities at Texhibition. Many B2B meetings took place and led to numerous orders being placed, including from key accounts such as Alexander Wang, Asos, Forever 21, Sainsbury's, Veronica Beard etc.

More information:
Texhibition Istanbul Yarns Denim
Source:

JANDALI

25.03.2024

NCTO: USTR seeks Input on Domestic Supply Chain Resilience Policy

Glen Raven hosted United States Trade Representative (USTR) Ambassador Katherine Tai in an important visit to the company’s yarn spinning manufacturing facility and headquarters for its Sunbrella® flagship brand in Burlington, N.C. followed by an industry supply chain roundtable.

Ambassador Tai’s visit coincides with USTR’s Federal Register notice for public input to inform the administration’s development of trade and investment policy initiatives related to a domestic supply chain resilience plan.

USTR has highlighted domestic textiles as a critical part of the supply chain. The textile sector, which includes yarns, fabrics, apparel and other finished goods, will be part of its fact-finding investigation into shaping policy tools that could be deployed to enhance supply chain resilience. The office is requesting input on policies that are currently working well for these sectors, and those that are not working well, in advancing domestic supply chains.

Glen Raven hosted United States Trade Representative (USTR) Ambassador Katherine Tai in an important visit to the company’s yarn spinning manufacturing facility and headquarters for its Sunbrella® flagship brand in Burlington, N.C. followed by an industry supply chain roundtable.

Ambassador Tai’s visit coincides with USTR’s Federal Register notice for public input to inform the administration’s development of trade and investment policy initiatives related to a domestic supply chain resilience plan.

USTR has highlighted domestic textiles as a critical part of the supply chain. The textile sector, which includes yarns, fabrics, apparel and other finished goods, will be part of its fact-finding investigation into shaping policy tools that could be deployed to enhance supply chain resilience. The office is requesting input on policies that are currently working well for these sectors, and those that are not working well, in advancing domestic supply chains.

The Ambassador’s visit to Glen Raven included a tour of the Sunbrella facilities, a design and innovation center, and a roundtable discussion with several other textile executives based in North Carolina who highlighted the significant impact of the sector to the U.S. economy.

Glen Raven, a family-owned company founded in 1880, operates five manufacturing facilities in North and South Carolina employing 2,500 people, including their joint venture with Shawmut Corporation. The company is currently in the process of scaling a $250 million multi-phase U.S. capacity expansion plan of its facilities and infrastructure to meet customer demand.

 

Source:

National Council of Textile Organizations

22.03.2024

SGL Carbon achieves annual targets for 2023

  • Three out of four business units with record sales and results
  • Carbon Fibers business weighs on the Group's profitability
  • Group sales of €1,089.1 million (-4.1%) and adjusted EBITDA of €168.4 million (-2.5%) in a difficult market environment
  • Sales and earnings forecast for 2023 achieved despite drop in demand from key market
  • 2024 further capacity expansion in graphite components for silicon carbide-based semiconductors

In fiscal year 2023, SGL Carbon achieved the sales and earnings targets set at the beginning of the year despite the drop in demand from the important wind market and an increasingly challenging economic environment. Group sales decreased slightly by €46.8 million (minus 4.1%) to €1,089.1 million (previous year: €1,135.9 million). At € 168.4 million, adjusted EBITDA, a key performance indicator for the Group, was also down slightly (minus 2.5%) compared to the previous year (€172.8 million) but was clearly within the forecast range for 2023 of €160 to 180 million.

  • Three out of four business units with record sales and results
  • Carbon Fibers business weighs on the Group's profitability
  • Group sales of €1,089.1 million (-4.1%) and adjusted EBITDA of €168.4 million (-2.5%) in a difficult market environment
  • Sales and earnings forecast for 2023 achieved despite drop in demand from key market
  • 2024 further capacity expansion in graphite components for silicon carbide-based semiconductors

In fiscal year 2023, SGL Carbon achieved the sales and earnings targets set at the beginning of the year despite the drop in demand from the important wind market and an increasingly challenging economic environment. Group sales decreased slightly by €46.8 million (minus 4.1%) to €1,089.1 million (previous year: €1,135.9 million). At € 168.4 million, adjusted EBITDA, a key performance indicator for the Group, was also down slightly (minus 2.5%) compared to the previous year (€172.8 million) but was clearly within the forecast range for 2023 of €160 to 180 million.

While the positive sales development of the Graphite Solutions (+€53.5 million to €565.7 million), Process Technology (+€21.6 million to €127.9 million) and Composite Solutions (+€0.8 million to €153.9 million) business units had a positive effect, the Carbon Fibers business unit had a negative impact on Group sales with a sales decline of €122.3 million to €224.9 million.

Outlook
The global economy will continue to face comparatively high interest rates and subdued growth prospects in 2024. Tighter financing conditions, weak trade growth and a decline in business and consumer confidence are also weighing on the economic outlook. In addition, heightened geopolitical tensions are contributing to increased uncertainty.

SGL Carbon expects different developments in our key sales markets in 2024. The most important sales and earnings driver will be demand for specialty graphite components for the semiconductor industry. In contrast, all indicators currently suggest that demand for carbon fibers for the wind industry will remain weak in 2024 and that the Carbon Fibers (CF) business unit will therefore continue to record operating losses. Even if demand picks up, SGL Carbon assumes that Carbon Fibers will require additional resources to make the most of market opportunities. With this in mind, teh company announced on February 23, 2024, that they are reviewing all strategic options for Carbon Fibers. These also include a possible partial or complete sale of the business unit.

SGL Carbon's sales forecast for the financial year 2024 takes all four operating business units into account, as the company is only at the beginning of evaluating the strategic options for CF. In line with the assumptions outlined, SGL Carbon is therefore expecting Group sales at the previous year's level (2023: €1,089.1 million).

In the earnings forecast, SGL Carbon has taken into account underutilization of production capacity in the Carbon Fibers business unit and the associated high idle capacity costs. The projected operating loss of CF will have a negative impact on the adjusted EBITDA of the SGL Carbon Group in 2024. Due to the expected positive development of Graphite Solutions, SGL Carbon anticipates an adjusted EBITDA of between €160 million and €170 million for fiscal year 2024, taking into account all four operating business units. Should the process of reviewing all strategic options for the CF business unit result in a sale, the forecast of adjusted EBITDA in 2024 would be between €180 - 190 million.

More information:
SGL Carbon financial year 2023
Source:

SGL Carbon SE

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

18.03.2024

Autoneum: Increase in revenue and profit in 2023

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Outlook
According to forecasts, worldwide automobile production will be somewhat restrained in 2024 and may even decline slightly compared with 2023. Based on these market forecasts1, Autoneum expects revenue in 2024 of CHF 2.3 billion to 2.5 billion. The Company anticipates an EBIT margin of 4.5–5.5% and free cash flow in the high upper double-digit million range for 2024.

1 Source: S&P Global Light Vehicle Production Forecast of February 16, 2024.

More information:
Autoneum financial year 2023
Source:

Autoneum Management AG

Collaboration between IHKIB and WRAP (c) IHKIB
18.03.2024

Collaboration between IHKIB and WRAP

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

Mr. Selcuk Mehmet Kaya, Chairman of the International Relations and Sustainability Committee of IHKIB, and Mr. Avedis Seferian, President and CEO of WRAP, officially inked a collaboration agreement on March 8, 2024, marking a significant step towards fostering business relations between Türkiye and the USA. The agreement focuses on a pilot project developed by IHKIB and WRAP, aiming to identify leading Turkish apparel companies exporting to the USA and encouraging these facilities to attain WRAP certification. In return, WRAP will provide in-person and virtual training at no charge to guide these facilities through the certification process. The project seeks to strengthen business ties between Türkiye and the USA, creating additional opportunities for mutual cooperation between the parties in both countries.

Source:

IHKIB - Istanbul Apparel Exporters’ Association

Mahlo at IndoIntertex in Jakarta (c) Mahlo GmbH + Co. KG
15.03.2024

Mahlo at IndoIntertex in Jakarta

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Mahlo GmbH + Co. KG exhibits its technologies at the upcoming IndoIntertex trade show in Jakarta. The event, scheduled from March 20 to March 23, will serve as a platform for Mahlo and its long-term partner agency Agansa to showcase its solutions tailored to meet the evolving needs of the Indonesian textile sector.

With a rich history in textile manufacturing and a skilled workforce, Indonesia has emerged as a key player in the global textile landscape. The country's strategic location, coupled with favorable government policies, has fueled the growth of its textile sector, attracting investments and fostering technological advancements.

Mahlo's participation in the IndoIntertex trade show underscores its commitment to supporting the Indonesian textile industry with solutions designed to enhance quality, efficiency, and productivity. Visitors to Mahlo's booth can expect to explore a range of offerings, including measurement and control systems, process automation solutions, and expert consultancy services.

Source:

Mahlo GmbH + Co. KG

15.03.2024

ACIMIT: Italian textile machinery manufacturers at symposia in India

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

A new promotional initiative aims to boost trade relations between Italy and India in the textile sector. 11 Italian textile machinery manufacturers will be taking part in the forthcoming technological symposia scheduled in New Delhi and Mumbai from 9 to 12 April. The two events, organized by the Italian Trade Agency and supported by the Ministry of Foreign Affairs and International Cooperation, will allow Italian companies to showcase their technologies to a selected audience of Indian textile entrepreneurs.

The textile sector is of great significance in the Indian economy, contributing more than 2% of the GDP and allowing the Country to be among the largest exporter of textile and apparel items. Moreover India represents the third largest foreign market for the Italian textile machinery industry.

In 2022 India imported Italian textile machinery for a total value of about 200 million euro. Referring to the first 9 months of 2023, the value shows a slight decrease compared to the value for the same period of the previous year, but the forecast for the current year remains positive.

Italian companies participating in the symposia, all of which are ACIMIT members, are: Autefa, Cubotex, Danitech, Lafer, Mcs, Monti-Mac, Reggiani Macchine, Salvadè, Savio, Sicam, Testa.

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

KARL MAYER and Grabher: Competence platform for wearables (c) KARL MAYER GROUP
13.03.2024

KARL MAYER and Grabher: Competence platform for wearables

KARL MAYER has already produced a wide range of electrically conductive warp-knitted items for a wide variety of applications in the TEXTILE-CIRCUIT division of its TEXTILE MAKERSPACE, including a sensor shirt, a gesture control system and a conductive charging station. In order to drive the topic of wearables forward, the textile machine manufacturer has signed a cooperation agreement with the Grabher Group and delivered an MJ 52/1-S to the specialist for high-tech textiles in Lustenau. Managing Director Günter Grabher officially inaugurated the key machine for project work in the smart textiles sector in May 2023.

The machine is involved in various research projects, but is also available for new projects and tasks. The smart textiles competence team at KARL MAYER and Grabher is looking forward to supporting the ideas and work of interested parties also outside the research network with its know-how and the possibilities of the MJ 52/1-S.

KARL MAYER has already produced a wide range of electrically conductive warp-knitted items for a wide variety of applications in the TEXTILE-CIRCUIT division of its TEXTILE MAKERSPACE, including a sensor shirt, a gesture control system and a conductive charging station. In order to drive the topic of wearables forward, the textile machine manufacturer has signed a cooperation agreement with the Grabher Group and delivered an MJ 52/1-S to the specialist for high-tech textiles in Lustenau. Managing Director Günter Grabher officially inaugurated the key machine for project work in the smart textiles sector in May 2023.

The machine is involved in various research projects, but is also available for new projects and tasks. The smart textiles competence team at KARL MAYER and Grabher is looking forward to supporting the ideas and work of interested parties also outside the research network with its know-how and the possibilities of the MJ 52/1-S.

The MJ 52/1 S is also an extremely flexible project machine. The 138″ model in gauge E 28 produces a wide range of warp-knitted fabrics and incorporates conductive material directly into the textile surface - exactly where it is needed and with the structure that is required. The basis for the tailor-made fiber placement is KARL MAYER's string bar technology. The system for controlling the pattern guide bars ensures a fast, established textile production process and a high degree of pattern freedom.

Source:

KARL MAYER GROUP

(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

Thomas Stegmaier appointed Sustainability Officer Photo: DITF
Dr.-Ing. habil. Thomas Stegmaier
11.03.2024

DITF: Thomas Stegmaier appointed Sustainability Officer

The EU directive on the further development of sustainability reporting (CSRD) poses major challenges for companies and the public sector. Until now, the regulations have only applied to large capital market-oriented companies. However, far-reaching changes to sustainability reporting are expected when the CSRD is transposed into national law in 2024. The German Institutes of Textile and Fiber Research (DITF) are facing up to this challenge of external reporting and at the same time the responsibility for sustainable and resource-conserving science. The Textile Research Center has therefore set up a specialist department reporting to the Executive Board.

The DITF are reaffirming their commitment to sustainability with the appointment of the previous Head of the Competence Center Textile Chemistry, Environment & Energy, Dr.-Ing. habil. Thomas Stegmaier, as Chief Sustainability Officer (CSO). In addition to this new role, Stegmaier will continue to provide his expertise to the Competence Center Textile Chemistry, Environment & Energy as Deputy Head.

The EU directive on the further development of sustainability reporting (CSRD) poses major challenges for companies and the public sector. Until now, the regulations have only applied to large capital market-oriented companies. However, far-reaching changes to sustainability reporting are expected when the CSRD is transposed into national law in 2024. The German Institutes of Textile and Fiber Research (DITF) are facing up to this challenge of external reporting and at the same time the responsibility for sustainable and resource-conserving science. The Textile Research Center has therefore set up a specialist department reporting to the Executive Board.

The DITF are reaffirming their commitment to sustainability with the appointment of the previous Head of the Competence Center Textile Chemistry, Environment & Energy, Dr.-Ing. habil. Thomas Stegmaier, as Chief Sustainability Officer (CSO). In addition to this new role, Stegmaier will continue to provide his expertise to the Competence Center Textile Chemistry, Environment & Energy as Deputy Head.

The task of the Chief Sustainability Officer is to develop solutions to reduce the DITF's energy and resource consumption, promote renewable energies and implement efficient energy use. The management team, the operational organizational units and all employees are involved in the process.

The CSO also acts as a driving force for both the Executive Board and the research departments to promote sustainability issues.

Launch of GarmentTech İstanbul Exhibition (c) Teknik Fuarcılık
At the GarmentTech İstanbul Exhibition press conference; Teknik Fairs organization team, members of the Garment Machinery Advisory Board, KOMİD President, TEMSAD President and sector representatives.
11.03.2024

Launch of GarmentTech İstanbul Exhibition

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

Source:

Teknik Fuarcılık

08.03.2024

Final report of the World Pultrusion Conference 2024

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The conference takes place every two years in a European country of importance to the pultrusion industry and is organised by AVK for the European Pultrusion Technology Association (EPTA), in cooperation with the American Composites Manufacturers Association (ACMA).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V / The European Pultrusion Technology Association (EPTA)

EURATEX: Launch of educational project AEQUALIS-4-TCLF (c) EURATEX
Kick off meeting of the AEQUALIS4TCLF project
06.03.2024

EURATEX: Launch of educational project AEQUALIS-4-TCLF

In the context of the EU Pact for Skills, EURATEX launches an EU co-funded project under ERASMUS+ Programme to support the up-skilling and reskilling in the textile, clothing, leather and footwear (TCLF) sectors.  The new project, AEQUALIS-4-TCLF, brings together 19 partners mainly from Eastern and Northern Europe1 who will work together in the coming 4 years to give a boost to upskilling and reskilling of workers in the TCLF industry.

Following the blueprint project SMART4TCLF and complementary to the METASKILLS4TCLF project, AEQUALIS4TCLF prioritizes creating strong links with regional and local entities to boost skills initiatives and establishing an EU-wide Network of TCLF vocational education and training (VET) and higher education (HE) providers. Based on the results from the skills gap analysis, AEQUALIS4TCLF will develop new national skills strategies in seven countries to address specific regional needs, setting a clear path for workforce development with special attention to addressing discrimination and promote diversity in the TCLF industries.

In the context of the EU Pact for Skills, EURATEX launches an EU co-funded project under ERASMUS+ Programme to support the up-skilling and reskilling in the textile, clothing, leather and footwear (TCLF) sectors.  The new project, AEQUALIS-4-TCLF, brings together 19 partners mainly from Eastern and Northern Europe1 who will work together in the coming 4 years to give a boost to upskilling and reskilling of workers in the TCLF industry.

Following the blueprint project SMART4TCLF and complementary to the METASKILLS4TCLF project, AEQUALIS4TCLF prioritizes creating strong links with regional and local entities to boost skills initiatives and establishing an EU-wide Network of TCLF vocational education and training (VET) and higher education (HE) providers. Based on the results from the skills gap analysis, AEQUALIS4TCLF will develop new national skills strategies in seven countries to address specific regional needs, setting a clear path for workforce development with special attention to addressing discrimination and promote diversity in the TCLF industries.

1 List of Netherlands, Czechia, Lithuania, Finland, Croatia, Slovenia, Serbia

Source:

EURATEX

05.03.2024

Denim Expert's Goal: 100% wastewater recycling

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

The announcement of a new effluent treatment plant (ETP) marks a milestone in Denim Expert's journey towards sustainability. This upcoming facility is a testament to the company's dedication to reducing its ecological footprint and safeguarding local ecosystems through advanced water management techniques.

The new Effluent Treatment Plant (ETP) being developed by Denim Expert strives for 100% wastewater recycling. As the ETP rises from concept to reality, Denim Expert embarks on a transition towards its next horizon: aligning with the Zero Discharge of Hazardous Chemicals (ZDHC) Wastewater Guidelines Version 2.0.

Denim Expert's proactive approach to sustainability has been recognized on a global scale. The company has been named 'New Champion' by the World Economic Forum and has partnered with organizations such as the Sustainable Apparel Coalition (SAC), the United Nations Framework Convention on Climate Change (UNFCCC), and the Ellen MacArthur Foundation's Jeans Redesign program. As one of the first factories to join the Partnership for Cleaner Textile (PaCT) and in the process of implementing the 3E program, Denim Expert is dedicated to achieving 100% water reuse and full reliance on solar energy, further solidifying its commitment to driving positive environmental change.

01.03.2024

Re:NewCell’s bankruptcy application approved

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

Re:NewCell AB announced that the Stockholm District Court has decided to approve the previously communicated bankruptcy application and has declared the company bankrupt.

The appointed bankruptcy trustee is lawyer Lars-Henrik Andersson at Cirio Advokatbyrå.

February,25 the Board of Directors had decided to file for bankruptcy of Re:NewCell AB at the Stockholm District Court. The reason for the decision to file for bankruptcy was that Re:NewCell has not been able to secure sufficient financing to complete the strategic review, announced on 20 November 2023, with satisfactory result.

As part of the strategic review, Re:NewCell has had well advanced negotiations with its two largest shareholders, H&M and Girindus, its existing lenders BNP Paribas, European Investment Bank, Finnvera (as partial guarantor), Nordea, AB Svensk Exportkredit and potential new investors as well as other stakeholders regarding long-term financing solutions. These discussions have not resulted in a solution which would provide Re:NewCell with the necessary liquidity and capital to ensure its operations going forward.

"I regret to inform that we have been forced to take this decision to file for bankruptcy. As we have a strong belief in the company’s long-term potential, we have together with our advisors spent very substantial time and efforts into trying to secure the necessary liquidity, capital and ownership structure for the company to secure its future. As part of the negotiations, we have had intense dialogues with both current main owners, new investors and our banks, as well as other stakeholders. However, these discussions have not been successful. This is a sad day for the environment, our employees, our shareholders, and our other stakeholders, and it is a testament to the lack of leadership and necessary pace of change in the fashion industry” says Chairman of the Board of Directors, Michael Berg.

More information:
Renewcell bankruptcy
Source:

Renewcell

Pointcarre integrates Archroma's portfolio of 5,760 colors Photo: Archroma
23.02.2024

Pointcarre integrates Archroma's portfolio of 5,760 colors

Archroma Textile Effects expands the digital textile design and production system (CAD/CAM) Pointcarre with its entire portfolio of 5,760 colors.

Pointcarre Textile Software enables fashion, home furnishing and technical textiles designers to create accurate digital samples, streamline the fabric weaving, knitting and printing processes, and produce realistic presentations of their collections.

Incorporating the Archroma color portfolio into this workflow will allow designers to bring their ideas to life with greater speed and accuracy. They will not only have access to a vast searchable library of Archroma colors, but they will also be better able to produce the exact color they need at the factory.

All of the Archroma color references can be formulated with dyes that meet leading international eco-standards and the brand customer’s desired sustainability profile.

To support customers to optimize the potential of the new color library, Pointcarre is offering new interactive e-learning modules on its Academy training platform, as well as assistance in several languages.

Archroma Textile Effects expands the digital textile design and production system (CAD/CAM) Pointcarre with its entire portfolio of 5,760 colors.

Pointcarre Textile Software enables fashion, home furnishing and technical textiles designers to create accurate digital samples, streamline the fabric weaving, knitting and printing processes, and produce realistic presentations of their collections.

Incorporating the Archroma color portfolio into this workflow will allow designers to bring their ideas to life with greater speed and accuracy. They will not only have access to a vast searchable library of Archroma colors, but they will also be better able to produce the exact color they need at the factory.

All of the Archroma color references can be formulated with dyes that meet leading international eco-standards and the brand customer’s desired sustainability profile.

To support customers to optimize the potential of the new color library, Pointcarre is offering new interactive e-learning modules on its Academy training platform, as well as assistance in several languages.

More information:
Archroma Pointcarre CAD/CAM Software
Source:

Archroma