From the Sector

Reset
78 results
22.03.2024

Fashion for Good: Ten new innovators for 2024 programme

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

  • Algreen Ltd: Algreen co-develops alternative materials from algae and biobased sources that can replace fossil-based products such as PU.
  • Balena: Balena creates biodegradable partly biobased polymers for footwear outsoles.
  • Epoch Biodesign: Epoch Biodesign is an enzymatic recycler of PA66 and PA6 textile waste.
  • Fibre52: Fibre52 is a bio-based solution replacing traditional bleach prepared-for-dyeing and dye processes.
  • Gencrest BioProducts Pvt Ltd: Gencrest works with various agri-residues to convert them into textile-grade fibres using their enzymatic technology.
  • HeiQ AeoniQ: HeiQ AeoniQ™ is a continuous cellulose filament yarn with enhanced tensile properties.
  • Nanollose - Nullabor: Nullarbor™Lyocell is developed from microbial cellulose which is converted into pulp pulp to produce a lyocell fibre with their partner Birla Cellulose.  
  • REGENELEY:  REGENELEY pioneers advanced shoe sole recycling technologies by separating and recycling EVA, TPU, and rubber components found in footwear.
  • Samsara Eco: Samsara Eco is an enzymatic recycler of PA66 and PET textile waste.
  • SEFF: SEFF Fibre produces cottonised fibres and blends of hemp fabrics utilising a patented HVPED process.
Source:

Fashion for Good

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

08.03.2024

Archroma: New wet-fastness improver

Archroma has developed a new wet-fastness improver that helps brands and mills produce durable clothing, towels, linens and other textile products with long-lasting colors without compromising on quality or introducing hazardous chemicals.

ALBAFIX® ECO PLUS is a next-generation fixing agent that delivers a strong wet-fastness for all reactive dyes on cotton and other cellulosic fibers and polyester-cotton blends. It will not change the shade of the dyed fabric or negatively impact light-fastness. The product also avoids production challenges – such as foaming, acid hydrolysis and migration problems during drying – to promote efficiency and quality output.

ALBAFIX® ECO PLUS is suitable for jet applications, and for other dyeing and washing equipment with vigorous liquor circulation, and can also be applied by exhaustion, by padding or from the last bath of the soaping process after dyeing or printing.

Archroma has developed a new wet-fastness improver that helps brands and mills produce durable clothing, towels, linens and other textile products with long-lasting colors without compromising on quality or introducing hazardous chemicals.

ALBAFIX® ECO PLUS is a next-generation fixing agent that delivers a strong wet-fastness for all reactive dyes on cotton and other cellulosic fibers and polyester-cotton blends. It will not change the shade of the dyed fabric or negatively impact light-fastness. The product also avoids production challenges – such as foaming, acid hydrolysis and migration problems during drying – to promote efficiency and quality output.

ALBAFIX® ECO PLUS is suitable for jet applications, and for other dyeing and washing equipment with vigorous liquor circulation, and can also be applied by exhaustion, by padding or from the last bath of the soaping process after dyeing or printing.

Like ALBAFIX® ECO, the latest addition to the ALBAFIX® family has a positive influence on chlorine-fastness. When applied with double fixing, it achieves the same high performance on polyamide and PA/Elastane fabrics, as it does on cellulosic fibers. This makes it ideal for the production of swimwear, as well as sportswear and outdoor clothing.

ALBAFIX® ECO PLUS complies with global eco-standards and initiatives, including Global Organic Textile Standard (GOTS), bluesign® and the Zero Discharge of Hazardous Chemicals (ZDHC) Roadmap.

Source:

Archroma

06.03.2024

Browzwear adds complete Color Atlas by Archroma® library

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

More information:
Archroma Browzwear Color Atlas
Source:

Archroma

13.12.2023

Artistic Milliners and Archroma: Eco-advanced sulfur black dyeing for denim

International denim manufacturer Artistic Milliners and Archroma are collaborating to rewrite the future of denim. Leveraging Archroma’s DIRESUL® EVOLUTION BLACK dyestuff, the partners are promoting more eco-advanced sulfur black dyeing for denim with a variety of washdown effects and reduced environmental impact.

DIRESUL® EVOLUTION BLACK delivers outstanding resource savings, using less water and energy and producing less CO2 during dye synthesis. Furthermore, it offers unique shade and washdown behavior compared to standard black dyes to consistently create eye-catching aesthetics, especially on dark black shades with no bronzing effect. It is also laser-friendly.

Artistic Milliners launched a capsule collection based on the new DIRESUL® EVOLUTION BLACK technology at Kingpins Amsterdam in October, named EVO BLACK, winning a positive response from global brands. It is now working closely with a research and innovation team from Archroma, its technology partner of many decades, to expand its use of the new black coloration system in combination with other colors and performance effects.

International denim manufacturer Artistic Milliners and Archroma are collaborating to rewrite the future of denim. Leveraging Archroma’s DIRESUL® EVOLUTION BLACK dyestuff, the partners are promoting more eco-advanced sulfur black dyeing for denim with a variety of washdown effects and reduced environmental impact.

DIRESUL® EVOLUTION BLACK delivers outstanding resource savings, using less water and energy and producing less CO2 during dye synthesis. Furthermore, it offers unique shade and washdown behavior compared to standard black dyes to consistently create eye-catching aesthetics, especially on dark black shades with no bronzing effect. It is also laser-friendly.

Artistic Milliners launched a capsule collection based on the new DIRESUL® EVOLUTION BLACK technology at Kingpins Amsterdam in October, named EVO BLACK, winning a positive response from global brands. It is now working closely with a research and innovation team from Archroma, its technology partner of many decades, to expand its use of the new black coloration system in combination with other colors and performance effects.

18.10.2023

Tonello at Kingpins with new technologies

Once again Tonello will be present their technologies and partnerships at Kingpins from October 18-19.

DyeMate, the ozone, THE Laser
DyeMate is Tonello's new "patent-pending" technology that reinterprets the traditional indigo garment dyeing process, by making it automatic and repeatable, efficient and sustainable: carried out in a nitrogen atmosphere, without oxygen, with controlled reduction and oxidation, to achieve results that are perfectly comparable, in terms of authenticity and "aesthetic flavor," to those of denim that fades and becomes vintage with the passage of time.

Tonello will present a collection of garments with super bleach effects. With OBleach, EGO and O-Zone triad redefined the garment bleaching process, including no harmful chemicals such as chlorine and permanganate, in favor of sustainable and healthy production.

The entire collection will be embellished and finished with aesthetic solutions and details: the natural overdyeing of Wake, the ultra-thin graphics made with THE Laser Lab, the reproducible breakages of THE Laser T and TM.

Once again Tonello will be present their technologies and partnerships at Kingpins from October 18-19.

DyeMate, the ozone, THE Laser
DyeMate is Tonello's new "patent-pending" technology that reinterprets the traditional indigo garment dyeing process, by making it automatic and repeatable, efficient and sustainable: carried out in a nitrogen atmosphere, without oxygen, with controlled reduction and oxidation, to achieve results that are perfectly comparable, in terms of authenticity and "aesthetic flavor," to those of denim that fades and becomes vintage with the passage of time.

Tonello will present a collection of garments with super bleach effects. With OBleach, EGO and O-Zone triad redefined the garment bleaching process, including no harmful chemicals such as chlorine and permanganate, in favor of sustainable and healthy production.

The entire collection will be embellished and finished with aesthetic solutions and details: the natural overdyeing of Wake, the ultra-thin graphics made with THE Laser Lab, the reproducible breakages of THE Laser T and TM.

Collections, design, collaborations
The MSP - Most Sustainable Product - collection, developed together with Kingpins and Denim House, designed by Piero Turk and Serena Conti, and processed in Tonello's Research and Development Center with the latest responsible finishing technologies, returns this year.

Tonello will also present another project: ONE Denim. A collection that aims to combat resource waste in the denim industry by demonstrating concretely how many new denim garments could be made from a single fabric by optimizing processes and choosing appropriate technologies and production methods. The fabrics chosen are from Sharabati Denim, the design is by Piero Turk, and the collection is processed by Tonello.

SA-KE
This project was born out of a dialogue between Tonello's technology and the creativity of British designers Sadia Rafique and Kelly Harrington, who produced as many as 70 artworks that are partly physically present at Kingpins and partly published in a book-zine that tells the philosophy and logic of this unique and original work. A work that combines technology, expressive research and all new forms of image generation, across the boundary between natural and artificial, but still totally human.

Source:

Tonello

28.09.2023

CHT Fashion News Spring/Summer 2024

Every year, the internationally widespread and renowned Pantone color system releases the trend colors for the coming seasons with the Pantone View Colour Planner to show which color tendencies the fashion world is indicating. Pantone shows whether next season will be gaudy, pastel, nude, dark or earth-tone. The lifestyle-oriented color trend forecast offers seasonal inspiration, lead colors, color harmonies, and application ideas by material and product, providing plenty of ideas in advance for anyone designing women's and men's fashion, sportswear, cosmetics, interiors, industrial products, or multimedia content.

These trends are part of the newly released CHT Fashion News Spring/Summer 2024. Inspired by Pantone, CHT creates three different focus color worlds to realize your ideas color-wise. To ensure that these trend colors can also be precisely implemented and realized in practice, CHT offers the exact recipes in various product ranges at the same time.

Every year, the internationally widespread and renowned Pantone color system releases the trend colors for the coming seasons with the Pantone View Colour Planner to show which color tendencies the fashion world is indicating. Pantone shows whether next season will be gaudy, pastel, nude, dark or earth-tone. The lifestyle-oriented color trend forecast offers seasonal inspiration, lead colors, color harmonies, and application ideas by material and product, providing plenty of ideas in advance for anyone designing women's and men's fashion, sportswear, cosmetics, interiors, industrial products, or multimedia content.

These trends are part of the newly released CHT Fashion News Spring/Summer 2024. Inspired by Pantone, CHT creates three different focus color worlds to realize your ideas color-wise. To ensure that these trend colors can also be precisely implemented and realized in practice, CHT offers the exact recipes in various product ranges at the same time.

With these clear recipe sheets, the desired shade can be easily dyed. There is something for every sector, from recipes for garment and polyamide dyeing to polyester, cellulose and printing, as well dye selections to support the achievement of C2C Certified® textiles.

Fashion News is available digitally as an e-paper on CHT ePaper Portal or in printed version on request.

More information:
Pantone CHT Group
Source:

CHT Group

ISKO supports designers at London Fashion Week (c) ISKO
Designs from left to right by: Priya Ahluwalia, Chet Lo, Aaron Esh and Masha Popova
27.09.2023

ISKO supports designers at London Fashion Week

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

Chet Lo
This season, Chet Lo took an active stand in reclaiming the power lost during his youth, healing the childhood wounds inflicted by a society that sidelined differences instead of celebrating them.
ISKO’s Ctrl+Z fabric and specialist lasering techniques from ISKO’s Creative Room was used across three looks featuring signature Chet Lo erotic laser prints across denim bottoms.

Aaron Esh
The SS24 season marked the brand’s debut at London Fashion Week, a homecoming of sorts for Esh, who was born and raised in the heart of the British capital, studied at Central Saint Martins and became a finalist at the LVMH Prize earlier this year. The early impulses of Aaron Esh remain steadfast: clothes that combine establishment rigour with the rebellious spirit of youth culture, devotedly crafted for a generation who feels somewhere in-between.
Aaron created bootleg denim ripped jeans made entirely from ISKO Denim using R-TWO50 fabric, which comprises a minimum of 50% pre and post-consumer recycled content. The designer noted the addition of denim accompanied by leathers add a new level of depth to their latest collection.

Masha Popova
Masha Popova’s sophomore catwalk outing, MONSTER was a “seasonless” offering that combines Autumn Winter 2023 and Spring Summer 2024.
Masha continued her obsession with denim manipulation, using various finishings including over-dyeing, flocking, patchwork, scratching and fraying in a variety of colours from vibrant green to silver across jeans, tops and jackets, all developed with the help of ISKO’s Creative Room, London.

Source:

ISKO

IFM researchers Research Fellow Frank Chen, Research Fellow Marzieh Parhizkar, Research Engineer Amol Patil and Associate Professor Alessandra Sutti. Photo Deakin University
IFM researchers Research Fellow Frank Chen, Research Fellow Marzieh Parhizkar, Research Engineer Amol Patil and Associate Professor Alessandra Sutti.
20.09.2023

Deakin/Xefco: Dyeing jeans without a drop of water

Deakin University has signed a partnership agreement with Geelong-based company Xefco as part of its Recycling and Clean Energy Commercialisation Hub (REACH) to conduct new research to transform how our clothing, including jeans, get their colour.

Jeans are one of the most worn garments in the world, but they are also one of the least environmentally friendly, taking around 75 litres of water to dye just one pair.

Deakin’s work with Xefco is helping to explore if a waterless manufacturing process can replace the water intensive processes the clothing industry has used for hundreds of years. The new technology in development is called ‘Ausora’.

Associate Professor Alessandra Sutti, from Deakin’s Institute for Frontier Materials, said it was exciting to be on the commercialisation journey with Xefco, working with the company to discover what is possible and hopefully reduce the world’s fashion footprint.

“If successful, the Ausora technology, which colours fabrics without the need for large quantities of water, will put us a step closer to more efficient and sustainable clothing manufacturing,” Associate Professor Sutti said.

Deakin University has signed a partnership agreement with Geelong-based company Xefco as part of its Recycling and Clean Energy Commercialisation Hub (REACH) to conduct new research to transform how our clothing, including jeans, get their colour.

Jeans are one of the most worn garments in the world, but they are also one of the least environmentally friendly, taking around 75 litres of water to dye just one pair.

Deakin’s work with Xefco is helping to explore if a waterless manufacturing process can replace the water intensive processes the clothing industry has used for hundreds of years. The new technology in development is called ‘Ausora’.

Associate Professor Alessandra Sutti, from Deakin’s Institute for Frontier Materials, said it was exciting to be on the commercialisation journey with Xefco, working with the company to discover what is possible and hopefully reduce the world’s fashion footprint.

“If successful, the Ausora technology, which colours fabrics without the need for large quantities of water, will put us a step closer to more efficient and sustainable clothing manufacturing,” Associate Professor Sutti said.

Xefco CEO Tom Hussey said the company’s new pilot plant, housed at Deakin in Geelong, will test different materials, including specialised fabrics such as waterproof items like outdoor jackets and jeans.

“This is the first stage of Xefco’s vision for the technology, with the REACH project focused on demonstrating the commercial viability of the technology at pilot scale and developing processes so it can be scaled up for commercial production,” Mr Hussey said.

“Together, Deakin and Xefco will push the limits of innovation and see what is possible.”
Xefco’s pilot plant is co-located with Deakin researchers at ManuFutures, the state-of-the-art advanced manufacturing hub at Deakin’s Waurn Ponds campus.

Founded in 2018 Xefco now employs 17 people and its products are already making a difference across the world. Its XReflex technology, which reduces consumption of insulation materials, is being used by some of the world’s leading apparel and fashion brands including The North Face.

Backed by a $50 million grant from the Australian Government’s inaugural Trailblazer Universities Program, with industry and university support taking the total project value to $380 million, REACH is facilitating the development of greener supply chains and accelerating business success as markets move from a throughput economy to a circular economy.

Source:

Deakin University

09.06.2023

Archroma and COLOURizd™ collaborate to make fashion more sustainable

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

In contrast, the innovative QuantumCOLOUR™ process injects pigment and a binder directly into the yarn, using only 0.95 liters of water per kilograms of colored yarn while producing zero effluent. This represents an unprecedented reduction of 98% in water consumption alongside zero wastewater discharge, zero discharge of harmful chemicals, 73% decrease in carbon footprint and 50% reduction in energy use.*

With Archroma, textile manufacturers and apparel brands can add further value to the QuantumCOLOUR™ process with tailor-made system solutions, including JUST COLOR. This formaldehyde-free** pigment coloration system is based on Archroma’s revolutionary Printofix® pigment dispersions and Helizarin® binders to deliver exceptionally soft fabrics with high fastness and durability, while also enabling energy and chemical savings and higher productivity.

* As tested by Peterson Control Union
** Below limits of detection according to industry standard test methods

Source:

Archroma

01.06.2023

ERCA, Patagonia® and YKK announce implementation of ERCA’s REVECOL®

ERCA, Patagonia® and YKK announce the implementation of ERCA’s REVECOL®, a sustainable, innovative chemical agent, in YKK’s dyeing processes at their Vietnam production sites transforms common waste material, such as exhausted vegetable cooking oil, into an upcycled, certified high performance, safe textile chemical. ERCA has invested in circular practices to take waste material and use them as feedstocks to create new responsible chemical products.

Always searching for new sustainable innovations, REVECOL® caught the attention of Patagonia®. Driven by the goal to utilize non-extractive chemistry in their supply chain wherever possible, the brand teamed up with ERCA and trim supplier YKK to deploy REVECOL®.

REVECOL® LV-TS has a carbon footprint that is 72% lower* than the more conventional chemical auxiliaries produced by ERCA. Today ERCA produces a wide range of high-performance chemical auxiliaries made from used vegetable oil that are ZDHC, bluesign® approved and GRS certified.

ERCA is one of the first companies to have GRS certified chemical products, opening the door to circular chemical auxiliaries.

ERCA, Patagonia® and YKK announce the implementation of ERCA’s REVECOL®, a sustainable, innovative chemical agent, in YKK’s dyeing processes at their Vietnam production sites transforms common waste material, such as exhausted vegetable cooking oil, into an upcycled, certified high performance, safe textile chemical. ERCA has invested in circular practices to take waste material and use them as feedstocks to create new responsible chemical products.

Always searching for new sustainable innovations, REVECOL® caught the attention of Patagonia®. Driven by the goal to utilize non-extractive chemistry in their supply chain wherever possible, the brand teamed up with ERCA and trim supplier YKK to deploy REVECOL®.

REVECOL® LV-TS has a carbon footprint that is 72% lower* than the more conventional chemical auxiliaries produced by ERCA. Today ERCA produces a wide range of high-performance chemical auxiliaries made from used vegetable oil that are ZDHC, bluesign® approved and GRS certified.

ERCA is one of the first companies to have GRS certified chemical products, opening the door to circular chemical auxiliaries.

As part of their Sustainability Vision 2050, YKK is constantly working to deploy more sustainable chemical processes in their production. The ability to replace a commonly used dye chemical with a lower impact version was a no-brainer for YKK’s Vietnam management. REVECOL® is not only more sustainable, it is also more efficient, reducing the use of the dyeing auxiliary by 20% to 30%, thus  helping to lower YKK’s overall chemical usage.

* bluesign® Product Carbon Footprint Report

Source:

ERCA SPA

(c) Archroma
27.01.2023

FiberColors*: Upcycling textile waste into colors

With the Earth population reaching 8 billion in November 2022, the need to address the issue of textile waste becomes more critical.

According to earth.org, 92 million tons of textile waste is produced every year, a number that is expected to soar to 134 million tons by the end of the decade. Around 85% of all textiles discarded in the US are said to end up in landfills, leading to land and water pollution impacting first and foremost local communities.

Archroma, a company who creates colors for fashion, decided to look at the issue creatively: what if it could create colors from waste fashion?
The company had already developed a way to turn waste from the herbal and food industry into its range of EarthColors® featured by brands such as G-Star, Patagonia, Esprit, Tom Taylor, Pangaia, UGG, and Primark. Now they are is introducing a new innovation: the FiberColors* technology.

With the Earth population reaching 8 billion in November 2022, the need to address the issue of textile waste becomes more critical.

According to earth.org, 92 million tons of textile waste is produced every year, a number that is expected to soar to 134 million tons by the end of the decade. Around 85% of all textiles discarded in the US are said to end up in landfills, leading to land and water pollution impacting first and foremost local communities.

Archroma, a company who creates colors for fashion, decided to look at the issue creatively: what if it could create colors from waste fashion?
The company had already developed a way to turn waste from the herbal and food industry into its range of EarthColors® featured by brands such as G-Star, Patagonia, Esprit, Tom Taylor, Pangaia, UGG, and Primark. Now they are is introducing a new innovation: the FiberColors* technology.

With this technology, Archroma upcycles textile waste into colors. The colors are synthesized from a minimum content of 50% waste-based raw material.
R&D experts have developed a way to use cotton and/or polyamide and their blends (with a >95% purity) to substitute the major part of the petroleum-based raw material usually used to make dyestuff.

The resulting FiberColors* range, which is patent-pending and therefore exclusive to Archroma, includes five dyes covering a palette of timeless shades: Diresul® Fiber-Teak (brown shades), Diresul® Fiber-Ochre (olive shades), Diresul® Fiber-Maroon (bordeaux shades), Diresul® Fiber-Slate (blue grey shades) and Diresul® Fiber-Graphite (dark grey shades).

The dyes are especially suited for cellulose fibers such as cotton, viscose, linen and kapok, and can be used in continuous, exhaust, denim and garment dyeing and printing processes.

(c) ECOSENSOR™ by Asahi Kasei
18.11.2022

Asahi Kasei Group celebrates 100 years at ISPO Munich 2022

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

New this season is the application of the RespiGard™ by Polypore unique membrane designed for outdoor apparel. Its innovative pore structure is too small for water droplets to penetrate but features high porosity that allows for airflow and moisture evaporation.

In order to show at best the performances and possible applications of the fabrics made with RespiGard™, ECOSENSOR™ will feature at its ISPO space an ad hoc created outfit by the outerwear brand.

Furthermore, the majority of ECOSENSOR™ fabrics are made with sustainable ingredients which are certified by international certifications such as GRS and RCS through a traceable and transparent production process and supply chain.  100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials. Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Source:

ECOSENSOR™ by Asahi Kasei / C.L.A.S.S..

(c) Officina39
Juan Manuel Gomez, Officina39 Creative Leader
18.11.2022

Officina39 with SS24 collection at Denimsandjeans in Tokyo

The philosophy guiding Officina39's innovation and development ranges fluidly between exploration of color, denim heritage and artistic expression, but has sustainability and the search for environmentally friendly chemical solutions for the fashion industry as its cornerstones. This is the core vision that accompanied the Italian company, when presenting its latest technologies and collaborations at Denimsandjeans in Tokyo from November 1-2.

Denim & Art
Juan Manuel Gomez, Officina39 Creative Leader, represents the company’s multidisciplinary approach and combines artistic expression with a thorough technical experience. His explorations were drawn on the Denim Art Wall at the fair. Furthermore, in the interactive seminar “Art & Denim As A Process Of Repetition” he explained that there is a constant act of repetition as automatic drawing or pictorial act in the processes of the textile industry.

The SS24 collection
The Multicolor Denim Dreaming collection is a combination of several Officina39’s sustainable key technologies:

The philosophy guiding Officina39's innovation and development ranges fluidly between exploration of color, denim heritage and artistic expression, but has sustainability and the search for environmentally friendly chemical solutions for the fashion industry as its cornerstones. This is the core vision that accompanied the Italian company, when presenting its latest technologies and collaborations at Denimsandjeans in Tokyo from November 1-2.

Denim & Art
Juan Manuel Gomez, Officina39 Creative Leader, represents the company’s multidisciplinary approach and combines artistic expression with a thorough technical experience. His explorations were drawn on the Denim Art Wall at the fair. Furthermore, in the interactive seminar “Art & Denim As A Process Of Repetition” he explained that there is a constant act of repetition as automatic drawing or pictorial act in the processes of the textile industry.

The SS24 collection
The Multicolor Denim Dreaming collection is a combination of several Officina39’s sustainable key technologies:

  • Nebudye D: a wide range of fresh colors to obtain a unique dyeing effect in nebulization/fog system machinery and can be discharged in a creative way with Oz-One Powder, an advanced product to give garments a bleached yet eco-friendly treatment, and Remover IND/J-N, Officina39’s solution to replace the use of Potassium Permanganate (PP) on denim and obtain a worn and distressed vintage look.
  • Novantic series: a combination of selected dyestuffs with a special mordanting agent suitable to obtain surface dyeing to provide vintage or old look effects.
  • Recycrom™: a patented dyestuffs range obtained through a cutting-edge upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications. Its sustainable and revolutionary powders assure a whole universe of denim effects: from classic authentic vintage to acid wash look (Eco Marble), from printed effect (Indigo Replica) to worn and distressed vintage look (Recycrom™ Dirty).
  • Just One Step Process: an innovation that saves time, energy, space and of course water, by combining several phases of the Aqualess Mission at the same time: a raw garment enters the machine and a garment with a basic vintage effect comes out ready to be dried, already treated, bleached and softened.
  • Remover Activator: a technology that in combination with PP replacement products creates in one step general bleaching, localized corrosion and highlights effects on jeans.
Source:

Officina39 / Menabò Group srl

TAD Teintures et Apprêts Danjoux Photo TAD Teintures et Apprêts Danjoux
TAD Teintures et Apprêts Danjoux
06.10.2022

Coisne et Lambert: Acquisition of TAD Teintures et Apprêts Danjoux

Coisne et Lambert, the group composed of the two companies TDV Industries and Klopman International, a leader in the production and marketing of technical fabrics for the professional clothing and PPE sector, announced the acquisition of TAD Teintures et Apprêts Danjoux.

TAD is specialized in the dyeing and finishing of knitted fabrics and has been in the market for over 30 years. Based in Le Coteau (France), the company has a production site of 9,000 m² and is a major player in the civil and administrative markets for technical textiles for professional clothing, medical, sport and apparel.

With a well equipped R&D laboratory, responsive and innovative sampling and production processes, TAD is ISO 14001 certified to manage its environmental performance.

TAD will extend the group's textile know-how adding expertise in knitwear finishing (dyeing, finishing and functionalities). The complimentary nature of their skillsets will allow the three companies to develop synergies for the benefit of their common and specific markets.

Coisne et Lambert, the group composed of the two companies TDV Industries and Klopman International, a leader in the production and marketing of technical fabrics for the professional clothing and PPE sector, announced the acquisition of TAD Teintures et Apprêts Danjoux.

TAD is specialized in the dyeing and finishing of knitted fabrics and has been in the market for over 30 years. Based in Le Coteau (France), the company has a production site of 9,000 m² and is a major player in the civil and administrative markets for technical textiles for professional clothing, medical, sport and apparel.

With a well equipped R&D laboratory, responsive and innovative sampling and production processes, TAD is ISO 14001 certified to manage its environmental performance.

TAD will extend the group's textile know-how adding expertise in knitwear finishing (dyeing, finishing and functionalities). The complimentary nature of their skillsets will allow the three companies to develop synergies for the benefit of their common and specific markets.

This integration will enable TAD to strengthen its specific business model and its services as a French finishing company over the long term, for the benefit of its historical and future customers.

The group, which is made up of the two companies TDV Industries and Klopman International, achieved a turnover of 185 million euros for the 2021-2022 financial year and employs more than 600 people. It also intends to expand its presence in new markets and geographical areas. Klopman International and TDV Industries want to offer markets more complete, flexible and competitive solutions for professional, civil and military clothing.

Photo: Pincroft
23.09.2022

Pincroft: New camouflage pattern for Dutch soldiers

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

The fabric was created by global workwear textile manufacturer, Carrington Textiles, specifically following the Dutch MoD’s requirements on comfort and protection. The result is a lightweight yet durable textile of 210gsm with a composition of 50% cotton, 50% high tenacity nylon and Ripstop for added strength.

The high cotton content of the fabric creates a uniform that’s comfortable to wear due to its softness to the touch, and breathability, as well as providing moisture wicking properties, key elements for the tough conditions soldiers work in. The addition of high tenacity nylon to the fabric, provides added strength and durability, with the Ripstop properties of the fabric offering tear resistance.

Around 480,000 trousers and jackets will be delivered to officers from the Royal Netherlands Navy, Army, Air Force and Marechaussee, during a uniform roll out part of the Dutch MoD’s ‘STRONG’ programme that aims to equip the armed forces in the next 18 months with versatile uniforms and equipment that are adjustable according to the assignment. The pack also includes a raincoat, combat shirt and baseball cap.

Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

15.08.2022

THE ITALIAN LUSTER at Munich Fabric Start

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

"THE ITALIAN LUSTER" will allow all visitors an incredible journey into the Italian supply chain that has the ability to meet any demand of brands, from small to large production needs.

On the top floor of the Catalyzer Hall, it will be possible to view the individual collections of the companies in attendance and receive a beautiful gift specially created by the CADICA GROUP company from Carpi.

 
Participants
ACM - TRIMS AND ACCESSORIES PRODUCER
ACM was founded in 1982.
Since 1982, ACM has been providing the fashion world with unique, sought-after and customized details, guaranteeing prestigious and innovative workmanship. Each and every product is the result of the care we take at every stage of our production process: from the prototype, designed by putting the consumer's health first, to production with state-of-the-art machinery, which allows for fine workmanship and cutting-edge customization, while minimizing the impact on the environment (we are GRS certified) and complying with the strictest eco-toxicological regulations.

FASHION ART - LUXURY FASHION DESIGN
Fashionart is the brainchild of Andrea Rambaldi, who, after learning his trade from his parents, his mother a seamstress and his father the owner of a dye shop, decided to pursue a freelance career.
He began by collaborating with companies in the textile sector, where he deepened his knowledge in the field of chemistry and industrial processes, touching on the problems of processing cycles.
The real turning point came as a result of an important job for the Maison Chanel, which recognized the originality and effectiveness of his technical proposals. From that moment, this is 2008, FashionArt was born, a company focused on luxury fashion and design, expert in the design and production of garments.
From the idea to the final product, the company is able to support the client throughout the entire production process.
Since then, the company has grown and developed exponentially thanks to a team of managers, artists and experts whose experience makes them a benchmark in the high fashion industry. Fashionart operates exclusively in high fashion, a very difficult field in which to combine experience and technique with art and creativity, where our potential can be expressed to the fullest.

ELLETI - GARMENTS AND WASHING MAKER
Advocate of an approach that combines tradition, creativity, and innovation, for over 30 years Elleti Group has defined standards of absolute excellence for the denim industry. Born in the 80s in San Bonifacio, near Verona, the company developed in a one-of-a-kind context, a hotbed of ideas that led to the defining and establishing of new professions and skills in the field of denim treatment and garment personalization. Led by Luigi Lovato, right from the start the company established itself on the denim scene thanks to an ambitious and pioneering investment in new solutions. The following ten years mark an important growth which leads to the internationalization both of brand and production. After the implementing of a new department for garment dyeing, Elleti Group was ready to welcome the ever-increasing international demand, equipping itself with the first laundry in Tunisia, a country logistically central in the Mediterranean area, and as a result, ideal for the development of a complete textile supply chain. This successful story continues to unfold in the 2000s, a decade that marks the opening to the market of garment making thanks to two new structures in Romania, and peaks with the acquisition of Martelli Lavorazioni Tessili. Today Elleti Group stands firm in the market as a result of a complete offer that preserves the company’s artisanal vocation enriched through a constant process of responsible innovation.

In addition, companies BERTO INDUSTRIA TESSILE and OLIMPIAS GROUP will participate in the project by presenting their collections within their booths in the Catalyzer hall.

Source:

EFFE-BI SRL PR & COMMUNICATION

21.07.2022

EPIC Group and CleanKore: Plans to Advance Sustainable Denim

The partnership will aim at eliminating hazardous Potassium Permanganate Spray and most manual processes in denim finishing, while reducing Greenhouse Gas emissions, water and chemical use in the process

Hong Kong based Epic Group, a leading garment manufacturer for global brands today announced its strategic partnership with CleanKore, a denim innovation and patent licensing company. This partnership aims at scaling the CleanKore patented yarn dyeing technology that provides numerous sustainability benefits for both the denim mill and garment manufacturer.

CleanKore patented technology changes the chemistry and the process used to dyeing yarns at the denim mills by keeping intact the white core of the yarn and only dyeing the surface. This technology significantly reduces water, chemicals and process time in the denim garment finishing stage.

The partnership will aim at eliminating hazardous Potassium Permanganate Spray and most manual processes in denim finishing, while reducing Greenhouse Gas emissions, water and chemical use in the process

Hong Kong based Epic Group, a leading garment manufacturer for global brands today announced its strategic partnership with CleanKore, a denim innovation and patent licensing company. This partnership aims at scaling the CleanKore patented yarn dyeing technology that provides numerous sustainability benefits for both the denim mill and garment manufacturer.

CleanKore patented technology changes the chemistry and the process used to dyeing yarns at the denim mills by keeping intact the white core of the yarn and only dyeing the surface. This technology significantly reduces water, chemicals and process time in the denim garment finishing stage.

Denim garment finishing often involves onerous manual processes such as handsanding and hand whiskering, spraying of harmful Potassium Permanganate (PP) (done by heavily protective equipment donned personnel), and multiple washing cycles. CleanKore technology coupled with lasers enable elimination of the PP spray process, significantly improving health and wellbeing of apparel workers, as well as emissions of harmful chemicals. Manual processes are eliminated in most styles and significantly reduced in others.

CleanKore technology also enables the reduction of wash cycles – reducing water, chemical use and process time, adding to the sustainability credentials of the end products. The products currently tested by Epic Group and CleanKore demonstrate up to 44% of water savings in garment finishing and up to 60% of energy savings in the fabric dyeing stage, along with the elimination of PP spray.

Through their partnership, Epic Group and CleanKore are planning to rapidly scale up the adoption of this technology in partnership with Epic Group’s customer base. In the first year, the partnership plans to reach over 4 million pairs of denim and working towards a scale of 15 - 20 million pairs of denim per annum in the next 3 years, converting a large portion of Epic Group’s denim production to CleanKore technology.

Source:

EPIC Group & CleanKore

(c) Archroma
20.07.2022

Archroma releases its Color Atlas online library for open access

Archroma, a leader in specialty chemicals towards sustainable solutions, announced that the 5’760 color references of its Color Atlas library will be available in ASE file format for open access to the users of most design software for fashion, apparel, and textiles. With this, designers and stylists are given open access to the largest library of colors for cotton and polyester.

ASE or .ase (for Adobe Swatch Exchange) files are used to upload, share and access colors through the swatch palette of design software such as Photoshop, Illustrator and most CAD (Computer-aided design) systems.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes its approach as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”.

Archroma, a leader in specialty chemicals towards sustainable solutions, announced that the 5’760 color references of its Color Atlas library will be available in ASE file format for open access to the users of most design software for fashion, apparel, and textiles. With this, designers and stylists are given open access to the largest library of colors for cotton and polyester.

ASE or .ase (for Adobe Swatch Exchange) files are used to upload, share and access colors through the swatch palette of design software such as Photoshop, Illustrator and most CAD (Computer-aided design) systems.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes its approach as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”.

All color references available in the Color Atlas have been formulated with products that comply with leading international eco-standards, and can be selected based on the desired sustainability profile.

Each color from the Color Atlas by Archroma® is available for purchase from Archroma as a physical color standard that includes precise digital data and access to global dyeing technical support.

Source:

Archroma / EMG