From the Sector

Reset
29 results
Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

Grafik Trevira CS
08.12.2022

Trevira CS at the Heimtextil Trade Fair 2023

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

The following Trevira CS customers and partners will be exhibiting:
Chamatex SAS, F.lli Baroni s.r.l., FIDIVI Tessitura Vergnano S.p.A., Hoftex Färberei GmbH, Ilcat by Lei Tsu s.r.l., Lodetex S.p.A., Lonfil S.r.l., Mattes & Ammann GmbH & Co. KG, Mottura S.p.A., Pozzi Arturo S.p.A., PUGI R.G. S.R.L., Tessitura Mario Ghioldi & C. s.r.l., Tintoria Sala s.r.l., Torcitura Fibre Sintetiche S.p.A., Torcitura Padana S.p.A., Vlnap a.s., Wagenfelder Spinnereien GmbH and Wintex S.r.l.

The presentations on the Trevira CS brand will focus on 2 topics. One revolves around information on sustainability: The Path of Sustainability presentation will give visitors detailed information about the various sustainability aspects of the Trevira CS brand. The information chain will deal with Trevira CS technology, particularly sustainable product variants, the longevity of the textiles, the Trevira CS eco brand for flame retardant fabrics with recycled content, and the take-back program for Trevira CS fabrics. At the end of the chain, a prototype of a new product development will be presented, giving insight into the brand’s future sustainable development opportunities.

Once again, there will also be a special exhibition. The focus here will be on showcasing the special additional functions and properties that Trevira CS fabrics offer in addition to their flame retardancy. Visitors can look forward to a special staging: It’s showtime for the TEXTILE TALENTS by Trevira CS!

For the design of the special exhibition, all Trevira CS customers were invited to submit their latest Trevira CS products, distinguished by additional functions and/or special features, to the annual Trevira CS Fabric Competition. 227 products from 50 customers were submitted, from which about 150 were selected for the special exhibition. Several thousand meters of yarn will also be used in this year's special show.

Source:

Trevira GmbH

(c) Baldwin Technology Company Inc.
Baldwin’s Rick Stanford and Fi-Tech’s Ian Mills kick off partnership with a handshake
03.10.2022

Baldwin Technology partners with Fi-Tech to represent textile finishing technologies

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

“With the increasing demand of Baldwin’s finishing technology, we needed to find the right partner for sales promotion in the U.S. and Canadian markets for knits, wovens and non-wovens,” said Rick Stanford, Baldwin Technology’s VP Global Business Development, Textiles. “Fi-Tech of Richmond, Virginia is the perfect partner. They are well established in the textile and non-wovens industry and their portfolio of principals provides excellent synergy with Baldwin’s precision spray and plasma treater systems.”

Baldwin’s solutions are used in a wide variety of fabrics from basic jersey and fleece with softening and anti-microbial finishes to technical fabrics such as outdoor gear, military, upholstery, automotive and industrial fabrics utilizing the latest in technical finishes such as DWR, soil release, flame retardants and insect repellent among others.

Source:

Baldwin Technology Company Inc. / Adduco Communications

19.06.2022

Stahl introduces Integra® - a toolbox of flame-retardant and performance coating technologies

Stahl announced the launch of its Integra® portfolio, a versatile toolbox that provides tailor-made, customer-orientated solutions under the umbrella of flame-retardant technology, protective surfaces, and protective coatings. The integrated, polymer-driven approach behind Integra® offers customers greater flexibility in terms of product development, helping them to achieve regulatory and environmental compliance while ensuring superior product quality and fabric integrity.

Stahl announced the launch of its Integra® portfolio, a versatile toolbox that provides tailor-made, customer-orientated solutions under the umbrella of flame-retardant technology, protective surfaces, and protective coatings. The integrated, polymer-driven approach behind Integra® offers customers greater flexibility in terms of product development, helping them to achieve regulatory and environmental compliance while ensuring superior product quality and fabric integrity.

The market for flame retardants and performance coatings is increasingly complex and subject to extensive – and often conflicting – demands and requirements. This includes increasingly stringent chemical industry legislation that limits flexibility regarding chemical and additive usage as well as growing expectations from stakeholders regarding environmental, social, and governance (ESG) factors.
 
With Integra®, Stahl offers a polymer-driven solution that builds upon the flame-retardant technology offered through Stahl’s Eagleban™ brand, which is enhanced by Stahl’s expertise in polymer-based technologies for protective coatings and surfaces. By using the proven polymer technology as its “backbone” while harnessing the other technologies in its toolbox, including specialty crosslinkers and other additives, Integra® can help customers solve complex challenges in a flexible, integrated way that goes beyond traditional additive-driven approaches.

More information:
Stahl Coatings flame retardant
Source:

Stahl Holdings B.V.

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Graphik: Trevira GmbH
29.04.2022

Trevira CS at the Heimtextil Summer Special

The Trevira CS brand will be presented at Heimtextil 2022. This year the trade fair will be held as a one-time Summer Special from 21 to 24 June in Frankfurt am Main, Germany. The booth will feature more than 200 fascinating, versatile, flame retardant Trevira CS fabrics.

These will be displayed in the Long Stay Apartment installation. Changing lifestyles, living and working arrangements as well as the housing shortage in countless large cities mean the Long Stay Apartment segment of the hospitality sector has experienced exponential growth, becoming ever more important. For this reason, it is the focus of this year’s Trevira CS booth. The presentation of the “Long Stay Apartment by Trevira CS” is intended to familiarise visitors – particularly interior architects, designers and furnishers – with the trendsetting, innovative uses of Trevira CS fabrics in the contract sector.

The Trevira CS brand will be presented at Heimtextil 2022. This year the trade fair will be held as a one-time Summer Special from 21 to 24 June in Frankfurt am Main, Germany. The booth will feature more than 200 fascinating, versatile, flame retardant Trevira CS fabrics.

These will be displayed in the Long Stay Apartment installation. Changing lifestyles, living and working arrangements as well as the housing shortage in countless large cities mean the Long Stay Apartment segment of the hospitality sector has experienced exponential growth, becoming ever more important. For this reason, it is the focus of this year’s Trevira CS booth. The presentation of the “Long Stay Apartment by Trevira CS” is intended to familiarise visitors – particularly interior architects, designers and furnishers – with the trendsetting, innovative uses of Trevira CS fabrics in the contract sector.

For the design of the apartment installation, the traditional Trevira CS Fabric Competition 2022 was announced at the end of 2021 and invited all customers to submit their latest Trevira CS products according to certain specifications. The winning fabrics will be announced at the trade fair and specially exhibited at the Trevira CS booth.

Director Marketing & Business Development Anke Vollenbröker: “Our exhibition gives exciting new insights into the modern concept of the Long Stay Apartment, presenting the live application of our customers’ Trevira CS innovations. An apartment designed for Long Stayers is a special challenge since it has to provide more than a hotel room or even an ordinary rental apartment: It needs to be an attractive temporary home while also offering the services and advantages of a hotel. We have made the Long Stay Apartment particularly “textile” and included submissions from all participants of our Trevira CS Fabric Competition 2022.”

Source:

Trevira GmbH

Photo: Swisstulle AG
16.03.2022

Trevira CS at BIG Show im Oman

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

The Trevira CS brand was showcased on the German Pavilion at the BIG Show Oman, an international exhibition for building materials, construction equipment, and interior design, in Muscat, Oman. This year, BIG Show, which is part of Oman Design & Build Week, was held from March 14-16.

Trevira CS has been part of BIG Show for years, as it is an important meeting point for the exhibiting companies with interior designers, construction companies, and project managers. Important authorities from the Middle East as well as major hotel brands were present again this year. In the Middle East, important tenders for major projects are due this year. The main focus of the trade show will be on the hotel & catering and hospital & care sectors, for which Trevira CS fabrics are of great interest because they meet the safety requirements that are usually required by law.

Trevira CS presented its extended brand concept that offers customers even more flexibility and also addresses sustainability. Building on to the high brand quality and performance, the recently introduced brands Trevira CS flexand Trevira CS eco offer properties and functions tailored to specific requirements. Furthermore, the Trevira CS Bioactive brand compliments the range, combining flame retardancy with antimicrobial properties. Fabrics bearing this brand meet the requirements for preventive fire protection and increased cleanliness.This brand concept is very well received by Trevira's customers. Many new flame retardant fabric developments embracing one of the Trevira CS brands were on display at BIG Show.

More information:
Trevira CS BIG
Source:

Trevira GmbH

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

(c) Trevira GmbH
08.09.2021

Trevira CS – starting afresh

  • New brand Trevira CS eco

After a challenging 2020 for Trevira CS®, a year in which the coronavirus crisis put pressure on the contract market, in particular on the hotel and event sector, and also on the cruise shipping industry, the market is starting to show some signs of improvement. Numerous new developments are seizing upon the trends that have emerged since the crisis began.

  • New brand Trevira CS eco

After a challenging 2020 for Trevira CS®, a year in which the coronavirus crisis put pressure on the contract market, in particular on the hotel and event sector, and also on the cruise shipping industry, the market is starting to show some signs of improvement. Numerous new developments are seizing upon the trends that have emerged since the crisis began.

Although the coronavirus pandemic had a negative effect on individual business sectors, it also has the potential to open up new market opportunities for flame retardant Trevira CS fabrics in the long run. The increase in people working from home and the longer and more frequent stay within one’s own home have led to a change in perspective in terms of the relevance of interior design. The design of the living space has undergone a revaluation. Sustainability, durability, high quality, and the desire for safe products that contain little to no harmful substances are defining criteria for selecting a new textile interior. The colour range of the new Trevira CS developments is directed specifically towards this trend and often comes across as discreet and close to nature. After Trevira CS products have found their way more and more into private homes, the new Trevira CS collections include numerous attractive textiles not only for the contract sector but also for the residential sector.

In the contract sector, notably in the hotel industry, the trends towards sustainability and quality are likely to continue to grow. Moreover, there is an increase in awareness as far as hygiene requirements are concerned. Textiles that are easy to clean without losing their appearance or their functionality can excel here. Accordingly, products ordinarily used in the healthcare sector might start to be of interest to the hotel and catering industry, public spaces, the transport industry, and to offices. This will apply in particular to areas where there is a regular flow of visitors and where people come into direct contact with fabrics. Antimicrobial textiles provide additional protection in these situations. Besides their flame retardancy, many new Trevira CS products integrate additional functions such as noise or sun protection.

Trevira has launched the Trevira CS eco brand for flame retardant textiles that consist of recycled Trevira products.
The new Trevira CS eco brand unites sustainability and flame retardancy. Trevira offers products for this which have been manufactured through different recycling processes. The flame retardant filament yarns are based on the use of recycled PET bottles (post-consumer recycling). Textiles bearing the Trevira CS eco trademark consist of at least 50% recycled materials.

Trevira uses an agglomeration facility to recycle reusable waste materials from production to manufacture recycled fibres that, after further processing, retain the same quality and performance characteristics as the original products (pre-consumer recycling).

Source:

Trevira GmbH

01.07.2021

Pulcra Chemicals achieves first Acquisition with Devan

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Source:

Pulcra Chemicals

Month's drapilux recommendation: The epitome of piece dyeing © drapilux
The epitome of piece dyeing: drapilux 115
16.03.2021

Month's drapilux recommendation: The epitome of piece dyeing

  • Inspiring Interiors

Textiles are an inseparable part of the interior as they give a room atmosphere and good acoustics. But which fabric is best suited for which purpose?
This month's drapilux recommendation is drapilux 115 and is aimed at classic and modern hotels as well as offices.

  • The epitome of piece dyeing: drapilux 115

Sustainable, flame retardant and a true eye-catcher – drapilux 115 combines all these features in one fabric. This decorative fabric, which resembles the material of a bedspread, has been created using an innovative yarn, part of which has been manufactured with sustainably produced fibres. The unusual look is achieved by means of a two-tone effect, as the woven material is dyed using a complex cationic/anionic process. The combination of sustainably produced fibres and flame retardancy makes drapilux 115 the quintessence of piece dyeing. Thanks to the modern colours, the fabric is very versatile.

  • Inspiring Interiors

Textiles are an inseparable part of the interior as they give a room atmosphere and good acoustics. But which fabric is best suited for which purpose?
This month's drapilux recommendation is drapilux 115 and is aimed at classic and modern hotels as well as offices.

  • The epitome of piece dyeing: drapilux 115

Sustainable, flame retardant and a true eye-catcher – drapilux 115 combines all these features in one fabric. This decorative fabric, which resembles the material of a bedspread, has been created using an innovative yarn, part of which has been manufactured with sustainably produced fibres. The unusual look is achieved by means of a two-tone effect, as the woven material is dyed using a complex cationic/anionic process. The combination of sustainably produced fibres and flame retardancy makes drapilux 115 the quintessence of piece dyeing. Thanks to the modern colours, the fabric is very versatile.

Source:

schönknecht : kommunikation
gesellschaft für public relations und marketing mbh

Elasticated melange tape by JUMBO-Textil for exacting requirements (c) JUMBO-Textil
JUMBO Textil Band schwarz
10.03.2021

JUMBO: The perfect melange

  • Elasticated melange tape by JUMBO-Textil for exacting requirements

Reliable functionality, select aesthetics, exceptional comfort – the new elasticated melange tape from JUMBO-Textil can really do a lot – and looks extremely good doing it.

Great functionality and an elegant design
To create this innovative elasticated tape, different premium-quality yarns are woven into a high-performance tape for especially exacting demands in terms of comfort and visual appeal. The elasticated material offers amazing performance and robustness beyond its elegant, shimmering melange look and its pleasant, fabric-like feel.

•    Ideal for all applications on visible textile surfaces
•    Premium fabric-like aesthetic and feel
•    Shimmering melange effect
•    Can be manufactured in many individual types and fabrications
•    Additional designs possible: water repellent, flame retardant, etc.
•    For applications in vehicle interiors, functional clothing, the furniture industry, medical technology, and much more

  • Elasticated melange tape by JUMBO-Textil for exacting requirements

Reliable functionality, select aesthetics, exceptional comfort – the new elasticated melange tape from JUMBO-Textil can really do a lot – and looks extremely good doing it.

Great functionality and an elegant design
To create this innovative elasticated tape, different premium-quality yarns are woven into a high-performance tape for especially exacting demands in terms of comfort and visual appeal. The elasticated material offers amazing performance and robustness beyond its elegant, shimmering melange look and its pleasant, fabric-like feel.

•    Ideal for all applications on visible textile surfaces
•    Premium fabric-like aesthetic and feel
•    Shimmering melange effect
•    Can be manufactured in many individual types and fabrications
•    Additional designs possible: water repellent, flame retardant, etc.
•    For applications in vehicle interiors, functional clothing, the furniture industry, medical technology, and much more

Wide range of applications in numerous industries
The new melange tape is specially designed and made for all visible applications: from multimedia holding tapes or document retainers in vehicle interiors to the functional and attractive cuff on sleeves, trousers or braces of outdoor or work clothing through to tensioning straps on backpacks, in exoskeletons or upholstered furniture.

"Elasticated tapes are often developed and considered primarily from a functional point of view. In our case it is different: our new melange tape combines great functionality with an elegant design and shows that elasticated narrow textiles can also be aesthetic highlights," as Patrick Kielholz, Business Development Manager at JUMBO-Textil emphasises. "The potential applications for our melange tape are almost limitless. Exciting solutions are available for almost all industries."

The most important properties at a glance:

Colours: grey melange, black melange; optionally, various other colour options
Sample: single-colour melange; optionally, longitudinal stripes, melange
Width, Standard: 40.0 mm
Width, Customized: 10 mm – 320 mm
Elasticity: up to 60%

Source:

JUMBO-Textil GmbH & Co. KG

BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance (c) RUDOLF GmbH
BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance
03.03.2021

BIONIC-FINISH®ECO by RUDOLF GROUP

  • BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance

In recent years, many scientists have shifted from favoring a “primordial soup” in pools of water to hydrothermal vents deep in the ocean as the original source of life on Earth. Regardless what the real beginning really was, water was certainly involved in the process some 3,5bln years ago. And since then, Mother Nature designed many ways to benefit of water and to be sheltered from it. Many engineering challenges humans face can be solved by turning to those 3,5bln years of experience and by using natural design as springboard. That’s biologically inspired engineering or, in short, bionics. BIONIC-FINISH®ECO of RUDOLF GROUP is Mother Nature’s work reproduced on textiles and apparel to protect us from water. To perform.

  • BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance

In recent years, many scientists have shifted from favoring a “primordial soup” in pools of water to hydrothermal vents deep in the ocean as the original source of life on Earth. Regardless what the real beginning really was, water was certainly involved in the process some 3,5bln years ago. And since then, Mother Nature designed many ways to benefit of water and to be sheltered from it. Many engineering challenges humans face can be solved by turning to those 3,5bln years of experience and by using natural design as springboard. That’s biologically inspired engineering or, in short, bionics. BIONIC-FINISH®ECO of RUDOLF GROUP is Mother Nature’s work reproduced on textiles and apparel to protect us from water. To perform.

Back in 2003, RUDOLF GROUP borrowed from Mother Nature the idea of dendrimers (from dendron, Greek word for ‘tree’), molecules made of multi-functional branches that interact among themselves, co-crystallize, and self-organize into highly ordered, multicomponent systems. These hyper-branched polymers attach to the textile and embed fluorine-free, durable water-repellent performance.
In 2021 BIONIC-FINISH®ECO comes as a reviewed and extended family of unique nonhalogenated, APEO-free, fluorine-free formulations suited for different materials and designed for different applications and needs. Still very much based on patented dendrimer technology, the new and strengthened BIONIC-FINISH®ECO’s product portfolio:

• Provides non-fluorinated and highly durable water repellent textile finishes for high-performance, professional applications (e.g. when brushing resistance is required);
• Delivers highly efficient and durable performance with low application amounts thus not affecting fabric feel and appearance (e.g. when remarkable softness is important);
• Fulfills a range of challenging technical requirements (e.g. minimal impact on flame retardant properties of technical fibers);
• Is suitable for both sportswear and outdoor applications, as well as for casual apparel and fashion clothing;
• Is bluesign® approved, ZDHC chemical gateway certified and compliant with most RSLs;

BIONIC-FINISH®ECO new portfolio includes universal and versatile solutions targeting the most standard requirements, as well as customized solutions that meet more demanding and specific expectations such as improved resistance to dry-cleaning. “None of us can entirely predict where our voyage will lead” says Dr. Gunther Duschek, RUDOLF GROUP Managing Director. “However, BIONIC-FINISH®ECO of RUDOLF GROUP will always be the fluorine-free, durable water repellent for ultimate  performance. As it is today”.

Anker Carpet (c) Anker
13.10.2020

Anker, Devan and Shark Solutions develop flame retardant aviation carpet

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Shark’s PVB reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill. The non-toxic binder (no chlorine or phthalates) is fully recyclable and thus lives up to the future standards of the industry.

Textile innovator Devan Chemicals, known for its tailor-made flame retardant solutions, was called in to develop the flame retardant back coating, which is compliant with the Airbus and Boeing safety standards. “Based on many years of experience and competences in customer related developments, improving recycling rates is getting more and more important”, says Dirk Vanpachtenbeke, R&D manager Flame Retardants at Devan. “We are very proud that, together with Anker and Shark Solutions, we can contribute to this rising demand for products that meet the standards of a circular economy solution.”

In other news, Anker and Devan are already working on a new project, which includes Devan’s antimicrobial/viral-reducing technology. Recently, Devan published test results on the activity of their technology (BI-OME®) against SARS-CoV-2 and other viruses. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles. This technology has been recognized with the 2020 European Technology Innovation Leadership Award by Frost & Sullivan.

Source:

Devan Chemicals NV / Marketing Solutions NV

Baldwin installs six precision spray systems in 60 days for textile manufacturers (c) Baldwin Technology Company Inc.
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied.
22.09.2020

Baldwin: six precision spray systems in 60 days for textile manufacturers

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Source:

Baldwin Technology Company Inc.

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG