From the Sector

Reset
105 results
Freudenberg showcases sustainable solutions at Techtextil 2024 (c) Freudenberg Performance Materials
Freudenberg´s sustainable carrier material for green roofs on urban buildings is made from renewable resources
15.03.2024

Freudenberg showcases sustainable solutions at Techtextil 2024

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Source:

Freudenberg Performance Materials

Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

ZwissTex integrates Kornit Technology in Production Photo: Kornit / ZwissTex
06.09.2023

ZwissTex integrates Kornit Technology in Production

Germany-based ZwissTex is a leading manufacturer of textiles with over 150 years of experience, creating innovative and sustainable textile solutions for the automotive and apparel industries. The company also operates in Mexico, to specifically serve the automotive sector across North American Free Trade Agreement (NAFTA) markets. Via OEMs, ZwissTex supplies German automakers including Volkswagen Auto Group, BMW, and Mercedes, as well as American manufacturers in select cases.

Unlike other Kornit customers, ZwissTex had no previous experience printing their own materials, and saw Kornit’s sustainable, single-step, Presto MAX S production system as an effective means of increasing their product capabilities.

Germany-based ZwissTex is a leading manufacturer of textiles with over 150 years of experience, creating innovative and sustainable textile solutions for the automotive and apparel industries. The company also operates in Mexico, to specifically serve the automotive sector across North American Free Trade Agreement (NAFTA) markets. Via OEMs, ZwissTex supplies German automakers including Volkswagen Auto Group, BMW, and Mercedes, as well as American manufacturers in select cases.

Unlike other Kornit customers, ZwissTex had no previous experience printing their own materials, and saw Kornit’s sustainable, single-step, Presto MAX S production system as an effective means of increasing their product capabilities.

“Our textiles were not classically printed in the past, and we did not produce any classical textiles in fashion, which is why we didn’t have any printing experience internally,” said Ralph Moldan, Technical Specialist at ZwissTex, as the system was being installed in their facility. “The only option was to find a system that would enable us to implement the areas in which we are active on the market easily and quickly, without requiring a lot of printing experience.”

One benefit of integrating Kornit technology into the ZwissTex production ecosystem: applying ink only where it is needed and seen, rather than to the full surface of each material. This translates to both reducing the company’s carbon footprint, and minimizing materials waste for a more cost-effective operation.

Prior to making the decision to invest in Kornit, ZwissTex conducted a series of tests and consultations, evaluating possible applications for different materials and engaging with their own key clients to ensure these finished products would meet their rigorous quality and durability standards. This included presenting Kornit-decorated samples at the Techtextil 2022 exhibition in Frankfurt.

Moldan found Kornit’s production capabilities opened new doors to customization of interior areas, a market that continues to grow. He anticipates this technology will create new opportunities with customers they could not reach previously, including new opportunities in sectors such as motor homes, airlines, and aircraft outfitters.

Source:

Kornit Digital

(c) Devan Chemicals NV
03.01.2023

Devan launches new allergen control technology at Heimtextil

Belgian textile innovator Devan Chemicals will launch Purissimo® NTL, a biobased and readily biodegradable allergen control technology, at the upcoming Heimtextil trade show in Frankfurt (January 10-13, 2023). It is based on probiotic encapsulation technology and can be applied to textiles during the finishing stage of the textile manufacturing process. Purissimo® NTL cleans up pet dander, pollen and house dust mite allergens in textiles throughout the home.

Purissimo® NTL is based on Devan’s already well-established probiotics, incorporated into a new microcapsule shell. The shell is based on a natural crosslinked biobased polymer, which results in microcapsules that are up to 97% biobased and readily biodegradable (OECD 301B).

Belgian textile innovator Devan Chemicals will launch Purissimo® NTL, a biobased and readily biodegradable allergen control technology, at the upcoming Heimtextil trade show in Frankfurt (January 10-13, 2023). It is based on probiotic encapsulation technology and can be applied to textiles during the finishing stage of the textile manufacturing process. Purissimo® NTL cleans up pet dander, pollen and house dust mite allergens in textiles throughout the home.

Purissimo® NTL is based on Devan’s already well-established probiotics, incorporated into a new microcapsule shell. The shell is based on a natural crosslinked biobased polymer, which results in microcapsules that are up to 97% biobased and readily biodegradable (OECD 301B).

Firstly, dormant probiotic bacteria (spores) are encapsulated. The microcapsule product is then integrated into textiles. Friction opens the capsules and releases the spores. The spores absorb humidity, self-activate and start to multiply. The probiotic bacteria start to consume the allergens that cause allergic reactions and asthma. Due to lower allergen concentration, individuals with respiratory allergies such as house dust mite matter, pet allergens and pollen allergens will have milder to no symptoms and hence a better well-being feeling.

Purissimo® NTL can be used on a wide range of textiles such as mattresses, pillows, bedcovers, blankets but also upholstered furniture, carpets, curtains and public transportation and pet items, such as bedding. It is Oeko-tex® compliant, has a long-lasting effect and a wash durability up to 30 washes is achievable.

Source:

Devan Chemicals NV

20.12.2022

JIAM 2022 OSAKA concludes successfully

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Under the theme of "It all connects at JIAM – the forefront of technology and master craftsmanship", the 2022 edition showcased apparel manufacturing solutions catered to each and every need, combining skillsets and knowledge with modern technology. At the opening ceremony, Mr Shinsuke Uchinashi, Chairman of the Japan Sewing Machinery Manufacturers Association (JASMA), commented, "In the new normal, there is growing demand for new technological advancements, productivity improvements, and greater quality control. In addition to solving these pain points, this edition’s exhibitors are also showcasing various innovations in response to automation, IoT, and networking."

A wide variety of special seminars held in Hall 4 were well received. Highlights included a skills training seminar hosted by an emeritus professor and panel discussions by leading companies in the manufacturing industry. SDGs, examples of IoT in industrial sewing machines, and upcycling initiatives were also on the agenda, with visitors gathered around the presented items taking notes.
 
The Home Sewing Zone led by three machine manufactures and JASMA held daily workshops where visitors could learn about upcycling using scraps, and take a break at the café with "cup sleeves" of their own making. Ms Kazuko Mizuochi of JASMA said, "We had a great attendance from the very first day. We were able to familiarize participants with sewing machines and also promote upcycling activities."

The next edition will take place from 27 – 30 November 2024 at INTEX OSAKA.

Source:

Messe Frankfurt Japan Ltd

(c) Neonyt | Dita Vollmond
16.12.2022

Neonyt wird erstmalig in Paris stattfinden

Die Neonyt wird erstmalig in Paris vom 21. – 23. Januar 2023 stattfinden und von der WSN Développement veranstaltet. Als eine in Europa relevante B2B-Orderplattform für Mode, Nachhaltigkeit und Innovation wird sie internationalen Einkäufer*innen professionell verantwortungsvolle Brands mit textilem Weitblick präsentieren und neue Märkte von Frankreich aus, in Ergänzung zum bestehenden Standort Düsseldorf, erschließen und bedienen. Streng-nachhaltig und nach Design kuratierte Fashion trifft auf Zeitgeist-Gespür für Sustainability, Style und Trends. Zweimal im Jahr, im Januar und September, wird die Neonyt künftig parallel zu der Who's Next und IMPACT verwirklicht.

Im August diesen Jahres wurde die erste Neonyt in Lizenz an die Igedo Exhibitions in Düsseldorf vergeben und findet dort erstmalig vom 28. – 30. Januar 2023 auf dem Areal Böhler statt. Die Messe Frankfurt verkündet nun die Partnerschaft mit dem mode-erfahrenen Messe-Veranstalter WSN Développement aus Paris, der die Neonyt Paris operativ planen und auf dem Paris Expo Porte de Versailles durchführen wird.

Die Neonyt wird erstmalig in Paris vom 21. – 23. Januar 2023 stattfinden und von der WSN Développement veranstaltet. Als eine in Europa relevante B2B-Orderplattform für Mode, Nachhaltigkeit und Innovation wird sie internationalen Einkäufer*innen professionell verantwortungsvolle Brands mit textilem Weitblick präsentieren und neue Märkte von Frankreich aus, in Ergänzung zum bestehenden Standort Düsseldorf, erschließen und bedienen. Streng-nachhaltig und nach Design kuratierte Fashion trifft auf Zeitgeist-Gespür für Sustainability, Style und Trends. Zweimal im Jahr, im Januar und September, wird die Neonyt künftig parallel zu der Who's Next und IMPACT verwirklicht.

Im August diesen Jahres wurde die erste Neonyt in Lizenz an die Igedo Exhibitions in Düsseldorf vergeben und findet dort erstmalig vom 28. – 30. Januar 2023 auf dem Areal Böhler statt. Die Messe Frankfurt verkündet nun die Partnerschaft mit dem mode-erfahrenen Messe-Veranstalter WSN Développement aus Paris, der die Neonyt Paris operativ planen und auf dem Paris Expo Porte de Versailles durchführen wird.

Von Beginn an war es das Ziel der Messe Frankfurt, die Neonyt mit ihrem ohnehin internationalen Charakter, ihrer Verantwortung und ihrer einmaligen Reputation auch über Deutschland hinaus in relevanten Märkten international zu platzieren und damit konsequent neue Zugänge zu verlässlich kuratierter Mode – hinsichtlich strikter Nachhaltigkeitsvorgaben bei gleichzeitiger Berücksichtigung aktueller, modischer Strömungen – zu ermöglichen. Dies sei in diesen Zeiten wichtiger denn je, um den unbestrittenen ökologischen und sozialen Mehrwert nachhaltiger Textilien zum Ausdruck zu bringen und verantwortungsvoller Mode attraktive Präsentationsplattformen in einem professionell-verlässlichen Orderumfeld zu ermöglichen, sagt Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt.

In Paris wird die Neonyt licensed by Messe Frankfurt zweimal im Jahr Ende Januar sowie Anfang September parallel zur internationalen Who's Next stattfinden. Die Who's Next präsentiert Einkäufer*innen Mode, Accessoires und Lifestyle plus Trends der Saison. In direkter Nachbarschaft zur Neonyt wird sich außerdem die 2019 gestartete IMPACT von WSN befinden. Sie setzt modisch-ökologische Akzente und unterstützt positive Maßnahmen zur Beschleunigung des ökologischen Wandels in der Modebranche. Who's Next und IMPACT ziehen international Einkäufer*innen an – insbesondere aber den Retail aus Frankreich, Italien, Spanien, Portugal, der Schweiz und Belgien. Vor Ort besonders interessant sind für alle Labels auf der Neonyt sowohl Specialty Stores, aber auch Multilable Stores, für die nachhaltige Mode sehr entscheidend ist.

Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt resümiert: „Zusammen mit der Neonyt in Lizenz in Düsseldorf wird die neue Location Paris eine symbiotische Marktbespielung und -ergänzung unseres Standort-Portfolios darstellen. Wir bieten fortan Einkäufer*innen, den Labels sowie unserer wachsenden und engagierten Community die Möglichkeit, sich Märkte neu zu erschließen und ihre Kund*innenbeziehungen noch stärker zu internationalisieren. Gleichzeitig treiben wir als Messe Frankfurt mit unserem internationalen Texpertise Network – über 50 Events weltweit, ca. 22.000 Aussteller und mehr als eine halbe Million Besucher*innen – intensiv unsere Nachhaltigkeitsbestrebungen im Textilbereich insgesamt voran.“

Source:

Messe Frankfurt Exhibition GmbH

(c) HeiQ
16.12.2022

HeiQ introduces new technologies to promote better sleep quality

HeiQ will present a host of innovative technologies to battle those enemies of sleep represented by heat, odor, and inanimate allergens, thereby addressing one of the most underrated elements that hinder a healthy life: a good night’s sleep.

HeiQ has developed technologies that promote better sleep quality for all:

HeiQ will present a host of innovative technologies to battle those enemies of sleep represented by heat, odor, and inanimate allergens, thereby addressing one of the most underrated elements that hinder a healthy life: a good night’s sleep.

HeiQ has developed technologies that promote better sleep quality for all:

  • HeiQ Cool - one of the first textile technologies to deliver both instant contact cooling and continuous evaporative cooling for optimal well-being during sleep.
  • HeiQ Mint - a plant-based deodorizer that controls odor development on textiles, providing fabrics with a long-lasting odor control capability that keeps textiles smelling fresh for longer.
  • HeiQ Allergen* Tech - a 100% biobased, proprietary technology that reduces exposure to allergens such as house dust mite matter, and pet allergens with the help of active probiotics. The technology is tested and certified by an accredited lab, BMA Labor in Bochum, Germany, and has been granted the Allergy UK Seal of Approval by The British Allergy Foundation.

These effective ingredients are already being applied to final products by HeiQ’s partners. Among them are Trendsetter/John Lewis pillows, duvets, and mattress protectors (with HeiQ Cool & HeiQ Allergen Tech), Trident Jiva Hypoallergenic bed linen (with HeiQ Allergen Tech), Belfama shower towels (with HeiQ Mint), and Lameirinho bed linen/bed sheets (with HeiQ Allergen Tech).

The above mentioned and HeiQ will showcase their new products at Heimtextil 2023 in Frankfurt, Germany, 10- 13 January 2023.

Source:

HeiQ Materials AG

Grafik Trevira CS
08.12.2022

Trevira CS at the Heimtextil Trade Fair 2023

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

  • Trevira CS Joint Booth with 16 Partners
  • Sustainability Presentation: Path of Sustainability
  • Special Exhibition: TEXTILE TALENTS by Trevira CS

The Trevira CS® brand presents itself together with 16 top customers and partners, an exciting special exhibition, and a sustainability presentation at Heimtextil in Frankfurt from 10 to 13 January 2023. The joint booth covers an area of over 1,400 m².

Visitors can find out about innovations in the fields of yarn production, woven and knitted fabrics and interior solar shading. Once again this year, the exhibitors on the Trevira CS stand will cover all textile applications with their flame retardant product for the home textile and contract market, from light curtains to heavy upholstery fabrics.

The following Trevira CS customers and partners will be exhibiting:
Chamatex SAS, F.lli Baroni s.r.l., FIDIVI Tessitura Vergnano S.p.A., Hoftex Färberei GmbH, Ilcat by Lei Tsu s.r.l., Lodetex S.p.A., Lonfil S.r.l., Mattes & Ammann GmbH & Co. KG, Mottura S.p.A., Pozzi Arturo S.p.A., PUGI R.G. S.R.L., Tessitura Mario Ghioldi & C. s.r.l., Tintoria Sala s.r.l., Torcitura Fibre Sintetiche S.p.A., Torcitura Padana S.p.A., Vlnap a.s., Wagenfelder Spinnereien GmbH and Wintex S.r.l.

The presentations on the Trevira CS brand will focus on 2 topics. One revolves around information on sustainability: The Path of Sustainability presentation will give visitors detailed information about the various sustainability aspects of the Trevira CS brand. The information chain will deal with Trevira CS technology, particularly sustainable product variants, the longevity of the textiles, the Trevira CS eco brand for flame retardant fabrics with recycled content, and the take-back program for Trevira CS fabrics. At the end of the chain, a prototype of a new product development will be presented, giving insight into the brand’s future sustainable development opportunities.

Once again, there will also be a special exhibition. The focus here will be on showcasing the special additional functions and properties that Trevira CS fabrics offer in addition to their flame retardancy. Visitors can look forward to a special staging: It’s showtime for the TEXTILE TALENTS by Trevira CS!

For the design of the special exhibition, all Trevira CS customers were invited to submit their latest Trevira CS products, distinguished by additional functions and/or special features, to the annual Trevira CS Fabric Competition. 227 products from 50 customers were submitted, from which about 150 were selected for the special exhibition. Several thousand meters of yarn will also be used in this year's special show.

Source:

Trevira GmbH

Foto: Messe Frankfurt
01.12.2022

Auftakt für Heimtextil Materialbibliothek: Interior.Architecture.Hospitality LIBRARY

Die Produktauswahl für die Interior.Architecture.Hospitality LIBRARY steht fest. Am 30. November 2022 hat die Jury über die in der LIBRARY ausgestellten Funktionstextilien auf der Heimtextil 2023 entschieden. 85 Aussteller wurden aus einer hohen Anzahl an Einreichungen ausgewählt, um ihre Produkte in der aufwendig inszenierten LIBRARY in Halle 4.0 zu präsentieren. Die Textilien werden mit dem Namen des Herstellers und der Standnummer gekennzeichnet.

Die neue Ausgabe der Materialbibliothek für Funktionstextilien stellt 2023 die Eigenschaften „schwer entflammbar“, „schalldämmend“, „lichtbeständig“, „antimikrobiell“ und „wasserabweisend“ in den Fokus. Neben der Funktionalität wurden ebenfalls das Design und die Innovation bei der Auswahl berücksichtigt. Mit Gerhard Sperling, Verband der Deutschen Heimtextilien-Industrie e.V., Jasmin Grego, GREGO Jasmin Grego & Stephanie Kühnle Architektur GmbH und Felix Diener, Marburger Tapetenfabrik, werden die Expertise eines Textilingenieurs und zweier Anwendungsexpert*innen in der Jury vereint.

Die Produktauswahl für die Interior.Architecture.Hospitality LIBRARY steht fest. Am 30. November 2022 hat die Jury über die in der LIBRARY ausgestellten Funktionstextilien auf der Heimtextil 2023 entschieden. 85 Aussteller wurden aus einer hohen Anzahl an Einreichungen ausgewählt, um ihre Produkte in der aufwendig inszenierten LIBRARY in Halle 4.0 zu präsentieren. Die Textilien werden mit dem Namen des Herstellers und der Standnummer gekennzeichnet.

Die neue Ausgabe der Materialbibliothek für Funktionstextilien stellt 2023 die Eigenschaften „schwer entflammbar“, „schalldämmend“, „lichtbeständig“, „antimikrobiell“ und „wasserabweisend“ in den Fokus. Neben der Funktionalität wurden ebenfalls das Design und die Innovation bei der Auswahl berücksichtigt. Mit Gerhard Sperling, Verband der Deutschen Heimtextilien-Industrie e.V., Jasmin Grego, GREGO Jasmin Grego & Stephanie Kühnle Architektur GmbH und Felix Diener, Marburger Tapetenfabrik, werden die Expertise eines Textilingenieurs und zweier Anwendungsexpert*innen in der Jury vereint.

„Die Interior.Architecture.Hospitality LIBRARY verschafft Besucher*innen gezielt Orientierung über alle fünf Funktionskategorien hinweg. Textilien müssen unbedingt dreidimensional erfahrbar sein, um sie im Licht live erleben zu können und mit ihren Innovationen kreativ anzuregen“, sagt Felix Diener.
Jasmin Grego erklärt: „Vergleichsmöglichkeiten zwischen Produkten zu kreieren, sehe ich als eine klare Stärke der LIBRARY-Sonderschau an. Kuratierte Einreichungen nebeneinander inszeniert zu erleben, zeigt die Bandbreite haptisch-materieller Ausgestaltungen bei gleicher Funktionalität. So wird auch Unerwartetes greifbar.“
„Entscheidend sind feststehende DIN-, EN- bzw. ISO-Normen – diese Klassifikationen bieten (Innen-)Architekt*innen technisch-funktionale Orientierung mit Tiefe: Normen sagen nicht nur aus, ob Textilien beispielsweise wasserabweisend oder lichtbeständig sind, sondern vor allem wie wasserresistent oder wie lichtecht die Stoffbeschaffenheit im
Vergleich genau ist“, fasst Gerhard Sperling zusammen.

Besucher*innen können die LIBRARY auf der Heimtextil vom 10. bis 13. Januar in Halle 4.0 live erleben. In der Mitte von Ausstellern von Decorative & Furniture Fabrics und Fibres & Yarns bietet sie für das Publikum aus dem Objektbereich einen optimalen Anlaufpunkt. Einen tieferen Einblick und Austausch ermöglichen die von den Kuratoren an den ersten beiden Messetagen angebotenen LIBRARY TOURS.

Online steht die LIBRARY das ganze Jahr unter www.textile-library.com zur Verfügung und ermöglicht einen gefilterten Überblick über die kuratierten Produkte mit unterschiedlichen Funktions- und Anwendungsprofilen.

Source:

Messe Frankfurt

Photo: FET
02.08.2022

FET at Techtextil 2022: Principle theme was Sustainability

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.07.2022

Monforts: New orders for machines at Techtextil 2022

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

Trials
“We are now looking forward to interesting new trials and pilot production runs, as well as the commissioning of new orders for machines resulting from the extremely busy exhibition,” he says. “Obviously, everyone at the moment is looking to make energy savings, and we have developed a range of options for helping companies increase their resource efficiency, both on new lines and as retrofitted systems, but this is not stifling innovation at the new material level.

“There was a lot of interest in what is possible with the Montex®Coat coating system and the range of different techniques it enables, and at our ATC in Mönchengladbach, a Montex®Coat unit is integrated into the full technical textiles pilot line, on which it is possible to run new fabrics in widths of up to 1.8 metres.”

Explosion proof
The technical textiles line at the ATC incorporates a Montex four-chamber stenter and is fitted with an explosion-proof coating application chamber in order to allow treatment to be carried out with organic solvents and other volatile materials.

Every single component within the chamber has to meet the standards of the European Union’s ATEX directives for working in a potentially explosive atmosphere. A range of sensors linked to alarms operate at various levels within the chamber to ensure the specified lower explosion limit (LOL) is never exceeded and the ventilation adapts accordingly.

Advanced functions
Special features on the finishing line relate to further advanced functions such as the ability to treat materials not only at temperatures of up to 320°C, but also to be able to treat the top and bottom faces of certain materials at different temperatures within a single pass through the machine.

To achieve this, the first two chambers of the stenter are fitted with special, heavy duty TwinAir ventilation motors and separate burners for individual top/bottom temperature. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment paramenters.

Another key feature of the technical textiles line at the ATC is the special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

27.06.2022

Ranga Yogeshwar presents third Top 100 award to Mayer & Cie.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

In all, 436 companies, including about ten per cent from machinery and plant engineering, competed for the Top 100 seal of innovation this year. Nearly 300 were successful and were congratulated in person by Ranga Yogeshwar at the SMB summit. He noted that the award winners set a role model example. “Innovators are thought leaders; they are always pioneers too,” said Yogeshwar, who mentors the competition. “They put their products to the test and ask themselves what an ecological society and a climate-oriented world will require of them. And they check the opportunities and challenges that increasing digitisation will bring for forms of cooperation, social relationships and, with them, for employee retention.”

More information:
Mayer & Cie Top 100 digitisation
Source:

Mayer & Cie.

(c) Indorama Ventures PCL
21.06.2022

Indorama Ventures works with Auping and TWE Group to deliver a fully circular mattress

The sustainable collaboration and innovation between Indorama Ventures (IVL), Auping and TWE Group presented a certified cradle to cradle process for mattress components across nonwoven applications, at Techtextil, Frankfurt, 21st to 24th June 2022.

Using circular research and design, the industry partnership between IVL Mullagh (Ireland), Auping and TWE Group has resulted in a perpetual, sustainable economic business model, for manufacturers globally. The inclusion of safe raw materials within mattress manufacturing allows the materials to be easily disassembled at the product’s end of use in order to be further reused as same components or recycled into new raw material at the same quality level, to enable versatile textile applications.

The sustainable collaboration and innovation between Indorama Ventures (IVL), Auping and TWE Group presented a certified cradle to cradle process for mattress components across nonwoven applications, at Techtextil, Frankfurt, 21st to 24th June 2022.

Using circular research and design, the industry partnership between IVL Mullagh (Ireland), Auping and TWE Group has resulted in a perpetual, sustainable economic business model, for manufacturers globally. The inclusion of safe raw materials within mattress manufacturing allows the materials to be easily disassembled at the product’s end of use in order to be further reused as same components or recycled into new raw material at the same quality level, to enable versatile textile applications.

Designed for disassembly to optimize the use of existing resources, reduce carbon footprint and support customer objectives all along their customers’ supply chain. This circular industry collaboration begins with design, where the mattress is constructed using only two different base materials, 100% PET polyester textiles and steel wire pocket springs connected with Niaga®️, a non toxic reversible adhesive, making the mattress easy to disassemble and recover.

IVL, Auping and TWE’s shared vision for a better world is demonstrated through their connected and innovative circularity that helps to close the loop. Auping collects, sorts and separates the collected fabrics, which then go to IVL Mullagh for processing, melting and extrusion to form polyester staple fiber. These staple fibers are then converted by TWE Group into nonwovens for use in Auping’s Evolve mattress, a fully circular mattress. Following the end of mattress use, the material recovery process simply starts again.

Auping estimates that annually more than 40 million mattresses are disposed of in Europe alone, the majority of which are incinerated. Their take back system in the Netherlands ensures that when their new mattress is delivered, the old mattress is retrieved and recycled, irrespective of the brand, ensuring existing materials are continually optimized, diverted from landfill and kept in use to achieve a circular economy.

Source:

Indorama Ventures PCL

Graphic: RadiciGroup
20.06.2022

RadiciGroup at Techtextil with innovative textile solutions

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

 

Source:

RadiciGroup

Photo: Devan Chemicals NV
15.06.2022

Devan expands cooling technology range

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

At Heimtextil Frankfurt 2022, Devan, will launch novel technologies to the Home Textiles market. The first innovation is a range of bio-based and biodegradable microcapsules. With increased sustainability and circularity requirements in Europe and beyond, Devan is pushing the limits further of its encapsulation methods, also in terms of wash durability. The capsules are biodegradable and hence no harm for risk of microplastics. The new R-Vital NTL range includes evergreen Aloe Vera, waste-material based avocado seed oil with very high hydration abilities! and Vitamine E.

Devan, as part of the Pulcra Chemicals Group, co-launches the new Pulcra TEC-SU, a new biobased C0 DWR. This hydrophobic agent has a bio-content above 60% and contains no APEO or formaldehyde. It keeps performing very good after multiple washings.

The Devan bio-based thermoregulation range, like Tones of Cool Bio which is already several years on the market, is having a positive effect on carbon footprint. Devan is now expanding its cooling range with a specific foam-solution. In the Home Textile industry new (bio)foam types are introduced the last 1,5 years to comply with the EU GreenDeal and circularity / recycling requirements. A good enough reason for Devan to develop a foam-specific cooling system. After all, research shows that our bedroom interiors get warmer every year, partly due to better insulation but also due to global warming. On top of that Devan thermoregulation solutions can save Energy and Water during application: low curing solutions are available next to cooling products to that can be applied, using less water.

 

Source:

Devan Chemicals NV

14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

(c) SHIMA SEIKI MFG., LTD.
14.06.2022

SHIMA SEIKI to exhibit at Techtextil 2022 in Frankfurt

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Source:

Archroma / EMG

(c) Lisa Rato
07.06.2022

Messe Frankfurt informierte in New York zu textilen Nachhaltigkeitsaktivitäten

Mit ihren Textilveranstaltungen engagiert sich die Messe Frankfurt weltweit für die Sichtbarkeit der Nachhaltigen Entwicklungsziele. Dabei arbeitet sie zusammen mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships. Am 2. Juni kam das internationale Netzwerk am Sitz der Vereinten Nationen zur ersten Jahrestagung zusammen.

Mit ihren Textilveranstaltungen engagiert sich die Messe Frankfurt weltweit für die Sichtbarkeit der Nachhaltigen Entwicklungsziele. Dabei arbeitet sie zusammen mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships. Am 2. Juni kam das internationale Netzwerk am Sitz der Vereinten Nationen zur ersten Jahrestagung zusammen.

Bereits seit mehr als 15 Jahren macht die Messe Frankfurt auf ihren weltweiten Textilveranstaltungen unter dem Dach des Texpertise Network auf das Thema Nachhaltigkeit aufmerksam, gibt spezielle Messe-Guides heraus, initiiert Talkrunden, bietet geführte Touren zu Aussteller*innen mit entsprechendem Portfolio, erstellt Materialgallerien mit nachhaltigen Textilinnovationen und veranstaltet eigene Events, wie etwa die Neonyt, ausschließlich zu nachhaltiger Mode. Seit 2019 arbeitet die Messe Frankfurt mit dem Conscious Fashion and Lifestyle Network und dem UN Office for Partnerships zusammen, um zusätzlich die Nachhaltigen Entwicklungsziele (SDGs) auf ihren weltweiten Textilveranstaltungen bekannt zu machen und so einen Beitrag zu deren Erreichung in der Mode- und Textilindustrie zu leisten. Am 2. Juni kam das internationale Netzwerk aus Vertreter*innen der Mode- und Lifestyle-Branche, Medien, Regierungen und UN-Institutionen zu seiner ersten Jahrestagung am Hauptsitz der Vereinten Nationen in New York zusammen – mit dabei das Texpertise Network der Messe Frankfurt.
 
In Anbetracht der enormen Auswirkungen des Mode- und Lifestyle-Sektors auf Mensch und Umwelt gab das Jahrestreffen des Conscious Fashion and Lifestyle Network einen Überblick darüber, wie die Plattform ein transparentes, umfassendes und transformatives Engagement globaler Stakeholder fördert, um dringende Maßnahmen für Nachhaltigkeit voranzutreiben. Hauptziel des Netzwerks ist es, vorhandenes Fachwissen, Innovation, Technologie und Ressourcen für eine nachhaltige und ganzheitliche Erholung nach COVID-19 zu mobilisieren, wobei die Ziele für nachhaltige Entwicklung als Leitrahmen dienen.
 
In einer gemeinsamen Paneldiskussion sprachen Olaf Schmidt, Vice President Textiles & Textile Technologies bei der Messe Frankfurt, Sara Kozlowski, Vice President Education and Sustainability Initiatives beim Council of Fashion Designers of America, Sergio Fernández de Córdova, Vorsitzender der PVBLIC Foundation und Roberta Marcenaro, CEO der Strategieberatung IMARK und Strategin bei der POLIMODA über die Bedeutung von Partnerschaften und Zusammenarbeit bei der Erreichung der Nachhaltigen Entwicklungsziele. Moderiert wurde die Diskussion von Lucie Brigham, Chief of Office des United Nations Office for Partnerships und Mitgründerin des Conscious Fashion and Lifestyle Networks.

„Die Textilindustrie ist eine Branche mit starken Gegensätzen. Man findet hier sowohl traditionelle Handwerkskunst als auch Hightech mit vollständig digitalisierten und automatisierten Fertigungsprozessen. Gleichzeitig sind die Lieferketten so komplex und global vernetzt wie in kaum einer anderen Branche. Nachhaltigkeit kann nur im engen Zusammenspiel der richtigen Partner*innen erreicht werden“, so Olaf Schmidt während der Diskussion. „Als Messeveranstalter machen wir selbst die Textilindustrie zwar nicht unmittelbar nachhaltiger. Unsere zentralen Aufgaben im Texpertise Network der Messe Frankfurt sind jedoch andere: Wir bieten Plattformen zum Netzwerken und bringen auf weltweit rund 60 Textilveranstaltungen die richtigen Partner*innen zusammen. Wir schaffen Sichtbarkeit, indem wir der Branche eine Bühne bieten, um ihr Nachhaltigkeitsengagement ins Blickfeld zu rücken. Wir bieten Bildung und Wissenstransfer auf zahlreichen Konferenz- und Talkformaten rund um das Thema Nachhaltigkeit. Und wir gehen mit gutem Beispiel voran. Mit unseren weltweiten Aktionen zu den SDGs haben wir bislang schätzungsweise rund 9.200 Aussteller*innen und 195.500 Besucher*innen erreicht – auch in Zeiten der Pandemie.“

Gemeinsam mit der Messe Frankfurt waren Vertreter*innen der Textil- und Modeunternehmen Hugo Boss, Heiq, Ocean Safe, Lectra, Madewell und des KTC Korea Textile Center vor Ort. Weitere Sprecher*innen auf der Veranstaltung waren zudem Arch and Hook, Catcher in the Style, Calik Denim, DRESSX, Fashion Impact Fund, Fashion Revolution, Jakarta Fashion Week, Lenzing, Lycra, nft now, People Tree, Remake, Saheli Women, Sourcing Journal, The Business of Fashion, Timberland, Tech Crunch, Textile Exchange, Transformers Foundation, The Canvas Global, Vogue, WWD sowie Designer*innen wie Anyango Mpinga, Gabriela Hearst, Patrick McDowell und Shivam Punjya.
 
Die nächsten Gelegenheiten, sich umfassend zur textilen Wertschöpfungskette einschließlich innovativer textiler Materialien, Herstellungsverfahren sowie Einrichtungs- und Objekttextilien und nachhaltiger Mode zu informieren, bieten die internationalen Leitmessen Techtextil, Texprocess und das Heimtextil Summer Special vom 21. bis 24. Juni 2022 sowie die erste DtoC-Ausgabe der Neonyt, das Neonyt Lab, vom 24. bis 26. Juni 2022 in Frankfurt.

Source:

Messe Frankfurt Exhibition GmbH

ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG