From the Sector

Reset
13 results
Graphic Toray
20.12.2023

Recycled carbon fiber: When a Boeing 787 turns into a Lenovo ThinkPad

Toray Industries, Inc. announced the successful development of recycled carbon fiber (rCF) derived from the production process of the Boeing 787 components using Toray’s advanced carbon fiber, TORAYCA™. The rCF, which is based on pyrolysis recycling process, has been integrated into the Lenovo ThinkPad X1 Carbon Gen 12 as reinforcement filler for thermoplastic pellets. Toray and Lenovo will continue to collaborate to expand the usage of rCF in other Lenovo products.

Toray rCF is the outcome of Boeing and Lenovo’s shared commitment to minimize their environmental impact. Boeing’s objective is to reduce solid waste going to landfill and produce recyclable materials, while Lenovo has been exploring materials to reduce the carbon footprint of their products. Toray rCF connects these visions by repurposing Toray’s high-performance carbon fiber from the Boeing aircraft production process into Lenovo’s ultra-light laptop PC.

Toray Industries, Inc. announced the successful development of recycled carbon fiber (rCF) derived from the production process of the Boeing 787 components using Toray’s advanced carbon fiber, TORAYCA™. The rCF, which is based on pyrolysis recycling process, has been integrated into the Lenovo ThinkPad X1 Carbon Gen 12 as reinforcement filler for thermoplastic pellets. Toray and Lenovo will continue to collaborate to expand the usage of rCF in other Lenovo products.

Toray rCF is the outcome of Boeing and Lenovo’s shared commitment to minimize their environmental impact. Boeing’s objective is to reduce solid waste going to landfill and produce recyclable materials, while Lenovo has been exploring materials to reduce the carbon footprint of their products. Toray rCF connects these visions by repurposing Toray’s high-performance carbon fiber from the Boeing aircraft production process into Lenovo’s ultra-light laptop PC.

TORAYCA™ is an established aerospace material known for its high strength, stiffness, and lightweighting properties. These qualities have led to its adoption in other applications such as electrical and electronic equipment housings, sports equipment, and other industrial applications.

A key advantage of carbon fiber is the ability to retain its primary mechanical properties even after the recycling process. Toray is actively advancing recycling technologies and establishing a strategic business model for rCF. Given that the carbon footprint of rCF is lower than that of virgin carbon fiber, Toray is proactively recommending the adoption of rCF to reduce the environmental impact of customers’ products. This commitment aligns with Toray’s dedication to fostering a circular economy, thereby reducing landfill waste.

Source:

Toray Industries

11.10.2023

Toray expands French Carbon Fiber Production Facilities

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Toray Industries, Inc. will expand the French subsidiary Toray Carbon Fibers Europe S.A.’s production facilities for regular tow medium- and high-modulus carbon fibers (up to 24,000 filaments). This move will increase annual capacity at the Abidos plant (South-West France) from 5,000 metric tons annually, to 6,000 metric tons. Production is expected to start in 2025.

Demand for medium- and high-modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites, and high-end automobiles. By boosting carbon fiber production capacity in Europe, Toray is responding to its customers’ demand for medium and high-modulus carbon fibers, as befits the market leader.

Source:

Toray Industries

Toray Composite Materials America: Boeing Supplier of the Year Photo Toray
04.09.2023

Toray Composite Materials America: Boeing Supplier of the Year

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Toray Composite Materials America, Inc. headquartered in Tacoma, Washington, has been awarded the "Boeing Supplier of the Year" award, a leadership-nominated award given to supplier companies that support and propel Boeing's strategic objectives through risk-sharing and enduring partnerships. This year, 12 companies were selected from among 11,000 Boeing suppliers worldwide, and CMA was selected as one of them for the Alliance Award. This is Toray's second award from Boeing, receiving the Supplier of the Year Excellence Award in 2019.

Toray began supplying Boeing in 1975 when it first qualified TORAYCA™ T300 carbon fiber for commercial application on the Boeing 737. Since then, Toray has provided high-performance carbon fiber and highly toughened, primary structure carbon fiber composite prepreg on various programs.

The trophy was presented by William A. Ampofo II, Vice President of Parts & Distribution Services and Supply Chain for Boeing Global Services and Chair of the Supply Chain Operations Council to CMA.

Source:

Toray

(c) Toray
01.02.2023

Toray: Adipinsäure für nachhaltiges Nylon 66

Toray hat die erste Adipinsäure entwickelt, die zu hundert Prozent aus biobasierten Rohstoffen besteht. Adipinsäure ist der Grundstoff zur Herstellung von Nylon 66 (Polyamid 66). Das neue Verfahren nutzt Zucker aus Biomasse, die nicht für die Herstellung von Lebensmitteln geeignet ist. Die firmeneigene Synthesetechnik kombiniert eine mikrobielle Fermentationstechnologie mit einer chemischen Reinigungstechnologie mit Trennmembranen. Das Unternehmen wird in den kommenden Jahren eine Produktionstechnologie entwickeln und die Polymerisation von Nylon 66 testen. Anwendungen für die biobasierte Adipinsäure sollen bis etwa 2030 kommerziell einsetzbar sein.

Nylon 66 ist haltbar und fest, und wird seit vielen Jahren für Fasern, Harze und andere Anwendungen verwendet. Der Wunsch, für Nylon 66 eine nachhaltige Alternative zu entwickeln, hat in den letzten Jahren zugenommen.  

Toray hat die erste Adipinsäure entwickelt, die zu hundert Prozent aus biobasierten Rohstoffen besteht. Adipinsäure ist der Grundstoff zur Herstellung von Nylon 66 (Polyamid 66). Das neue Verfahren nutzt Zucker aus Biomasse, die nicht für die Herstellung von Lebensmitteln geeignet ist. Die firmeneigene Synthesetechnik kombiniert eine mikrobielle Fermentationstechnologie mit einer chemischen Reinigungstechnologie mit Trennmembranen. Das Unternehmen wird in den kommenden Jahren eine Produktionstechnologie entwickeln und die Polymerisation von Nylon 66 testen. Anwendungen für die biobasierte Adipinsäure sollen bis etwa 2030 kommerziell einsetzbar sein.

Nylon 66 ist haltbar und fest, und wird seit vielen Jahren für Fasern, Harze und andere Anwendungen verwendet. Der Wunsch, für Nylon 66 eine nachhaltige Alternative zu entwickeln, hat in den letzten Jahren zugenommen.  

Für das neue Verfahren nutzt Toray Mikroorganismen, die aus Zuckern ein Adipinsäure-Zwischenprodukt herstellen. Die Biochemiker haben die Gene dieser Mikroorganismen neu kombiniert und so die Effizienz des Stoffwechsels gesteigert. Dabei kamen Methoden der Bioinformatik zum Einsatz, um optimale mikrobielle Fermentationswege für die Synthese zu finden. Die Mikroorganismen steigern die Ausbeute des Zwischenprodukts bei der Synthese um mehr als das Tausendfache. Umkehrosmose-Trennmembranen reinigen das Zwischenprodukt und erhöhen die Konzentration. Dieser Ansatz ist besonders energieeffizient. Auch entsteht bei dem  Verfahren zur Herstellung von Bio-Adipinsäure im Gegensatz zu den Herstellungsverfahren aus Erdöl kein Distickstoffmonoxid.

Toray entwickelt derzeit ein Verfahren zur Herstellung von Zuckern aus Ernterückständen und anderen nicht-essbaren pflanzlichen Ressourcen. Dabei forscht das Unternehmen in zwei Projekten gemeinsam mit dem National Institute of Advanced Industrial Science and Technology und dem RIKEN, Japans größter Forschungseinrichtung. Die Projekte erhalten Mittel der New Energy and Industrial Technology Development Organization. Das erste Projekt befasst sich mit der „Entwicklung von Produktionstechniken für hochfunktionale Biomaterialien unter Verwendung von intelligenten Zellen aus Pflanzen und anderen Organismen“, das zweite laufende Projekt behandelt die „Entwicklung einer biobasierten Produktionstechnologie zur Beschleunigung des Kohlenstoffrecyclings“. 

More information:
Toray nylon Adipinsäure Membrane
Source:

Toray

30.12.2022

Toray creates Fiber that adsorbs Pathogenic Proteins in Blood

Toray Industries, Inc., announced that it has combined nanotechnology and fiber technology to create a cross-shaped polymethyl methacrylate (PMMA) nanopore fiber that efficiently adsorbs pathogenic proteins in the blood.

The company developed this fiber by employing its PMMA hollow fiber membrane spinning technology. Changing the nanopore size on the surface and inside the fiber makes it possible to control the types of protein that this material adsorbs. This could become a fundamental blood purification technology for a range of protein adsorption columns that cause diseases.

The fiber’s cross-shaped cross section has a larger surface area than fibers with round ones. This provides much better contact between the blood and fiber and significantly enhances protein adsorption efficiency.

Toray Industries, Inc., announced that it has combined nanotechnology and fiber technology to create a cross-shaped polymethyl methacrylate (PMMA) nanopore fiber that efficiently adsorbs pathogenic proteins in the blood.

The company developed this fiber by employing its PMMA hollow fiber membrane spinning technology. Changing the nanopore size on the surface and inside the fiber makes it possible to control the types of protein that this material adsorbs. This could become a fundamental blood purification technology for a range of protein adsorption columns that cause diseases.

The fiber’s cross-shaped cross section has a larger surface area than fibers with round ones. This provides much better contact between the blood and fiber and significantly enhances protein adsorption efficiency.

Toray is the only company to have commercialized a PMMA hollow-fiber membrane artificial kidney for dialysis treatment. Its new nanopore fiber benefits from PMMA’s good protein adsorption and biocompatibility. Using the structural formation of a stereocomplex from two PMMA types entangled spirally during the spinning process to form the fiber shape, Toray made it possible for the fiber itself to develop pores of several to dozens of nanometers. Depending on the pore size, large proteins cannot go inside the pores. If they are too small, they are not trapped. This enables selective adsorption of moderately sized proteins trapped in pores.

The fiber pore sizes are adjustable to the diameters of target proteins for a range of diseases. These include inflammatory proteins in sepsis, autoantibodies in autoimmune diseases, and causative proteins in chronic illnesses. Toray’s technology is thus fundamental to developing disease-causing protein adsorption columns to purify blood.

Toray’s cross-shaped cross section suppresses inter-fiber adhesion, increasing the surface area per volume and enabling highly efficient protein adsorption. For blood purification applications, higher capacity adsorption columns increase blood removal amounts from the body, which can be especially stressful for the elderly and children. The new fiber’s highly efficient protein adsorption should contribute to compact, high-performance protein adsorption columns.

Source:

Toray Industries, Inc.,

(c) Toray
17.02.2022

Toray präsentiert pflanzliches Bio-Nylon Ecodear™ N510

Zahnbürsten, Gitarrensaiten, Damenstrümpfe, Fallschirme: Es gibt fast nichts, was man aus Nylon nicht herstellen könnte. In den USA entwickelt, waren diese Polyamide (chemisch: Polyhexamethylenadipinsäureamid) die ersten vollständig synthetisch hergestellten Fasern. Rohstoff damals wie heute: Erdöl. Toray ist es nun gelungen, eine Nylon-510-Faser aus rein biobasierten synthetischen Polymeren herzustellen. Ecodear™ N510 ist die erste zu 100 Prozent pflanzenbasierte Nylonfaser in der Ecodear™-Produktpalette von Toray.

Ecodear™ N510 richtet sich an High-End-Märkte, wo Kunden großen Wert auf Nachhaltigkeit legen. Die Fasern sind in erster Linie für Sport- und Outdoor-Bekleidung gedacht, können aber auch in leichter Unterwäsche sowie Spitzenstoffen verarbeitet werden.

Toray plant den Verkaufsstart von Textilien aus Ecodear™ N510 für Herbst/Winter 2023. Bis Ende März 2023 soll das Produktionsvolumen 200.000 Meter betragen und bis März 2026 auf 600.000 Meter anwachsen. Der Verkauf von Ecodear™ N510-Fasern soll dann im Herbst/Winter 2024 starten, bis März 2024 erwartet das Unternehmen eine monatliche Produktion von drei Tonnen.

Zahnbürsten, Gitarrensaiten, Damenstrümpfe, Fallschirme: Es gibt fast nichts, was man aus Nylon nicht herstellen könnte. In den USA entwickelt, waren diese Polyamide (chemisch: Polyhexamethylenadipinsäureamid) die ersten vollständig synthetisch hergestellten Fasern. Rohstoff damals wie heute: Erdöl. Toray ist es nun gelungen, eine Nylon-510-Faser aus rein biobasierten synthetischen Polymeren herzustellen. Ecodear™ N510 ist die erste zu 100 Prozent pflanzenbasierte Nylonfaser in der Ecodear™-Produktpalette von Toray.

Ecodear™ N510 richtet sich an High-End-Märkte, wo Kunden großen Wert auf Nachhaltigkeit legen. Die Fasern sind in erster Linie für Sport- und Outdoor-Bekleidung gedacht, können aber auch in leichter Unterwäsche sowie Spitzenstoffen verarbeitet werden.

Toray plant den Verkaufsstart von Textilien aus Ecodear™ N510 für Herbst/Winter 2023. Bis Ende März 2023 soll das Produktionsvolumen 200.000 Meter betragen und bis März 2026 auf 600.000 Meter anwachsen. Der Verkauf von Ecodear™ N510-Fasern soll dann im Herbst/Winter 2024 starten, bis März 2024 erwartet das Unternehmen eine monatliche Produktion von drei Tonnen.

Toray entwickelte Ecodear™ N510 durch Polymerisieren und Spinnen von Sebacinsäure aus Rizinusöl und Pentamethylendiamin aus Mais. Im Gegensatz zu anderen Nylonsorten auf rein pflanzlicher Basis hat Ecodear™ N510 einen hohen Schmelzpunkt und eine hervorragende Dimensionsstabilität. Außerdem ist es genauso stark und hitzebeständig wie Nylon 6. Unternehmen können so nachhaltige Produkte herstellen, ohne bei den Eigenschaften Abstriche machen zu müssen.

Für Toray ist Ecodear™ N510 aber nur der Anfang. Das Unternehmen arbeitet bereits an dünneren und leichteren Fasern sowie an Varianten mit einer anderen Form des Faserquerschnitts, was Textilien besondere Eigenschaften verleihen wird. Damit erschließt Toray neue Anwendungen für Bekleidung und technische Materialien und unterstützt die Transformation zu einer nachhaltigen Gesellschaft. Die Toray-Gruppe hat sich das Ziel gesetzt, bis 2050 Kohlenstoffneutralität zu erreichen und zur Lösung von Umweltproblemen auf der ganzen Welt beizutragen.

Source:

Toray / Storymaker GmbH

27.10.2021

JEC Korea 2021 co-located with Carbon Korea via JEC Korea Connect

From November 3-5, 2021, JEC Korea 2021 will be held at the COEX and online, via JEC Korea Connect, simultaneously with the first edition of Carbon Korea. Due to the COVID situation, for its 14th edition and 4th time in Seoul, JEC KOREA will bring together exhibitors and attendees in one single hall for both exhibiting companies and conferences, and in a hybrid format with JEC Korea Connect, including digital booths and conferences in livestreaming, to better network and share knowledge.

More than 50 domestic and foreign industry representatives will exhibit in Seoul and online during three days, among which: Hyosung, Toray Korea, Jeollabuk-do pavilion, Leresche, Pinette, MFtech of France, ZSK of Germany, HOS-TECHNIK of Austria. Through this, the entire value chain of composite materials, including large companies as well as small and medium-sized enterprises, gather in one place to showcase their latest technologies and innovations.

From November 3-5, 2021, JEC Korea 2021 will be held at the COEX and online, via JEC Korea Connect, simultaneously with the first edition of Carbon Korea. Due to the COVID situation, for its 14th edition and 4th time in Seoul, JEC KOREA will bring together exhibitors and attendees in one single hall for both exhibiting companies and conferences, and in a hybrid format with JEC Korea Connect, including digital booths and conferences in livestreaming, to better network and share knowledge.

More than 50 domestic and foreign industry representatives will exhibit in Seoul and online during three days, among which: Hyosung, Toray Korea, Jeollabuk-do pavilion, Leresche, Pinette, MFtech of France, ZSK of Germany, HOS-TECHNIK of Austria. Through this, the entire value chain of composite materials, including large companies as well as small and medium-sized enterprises, gather in one place to showcase their latest technologies and innovations.

JEC KOREA Technical Conference + ICF International Carbon Festival will unite 20 global speakers
for 3 days at the core of the event, as well as online through JEC Korea Connect, improving the composites skills of all attendees. It will be an exchange of technical market trends and innovation under the themes of:

  • New Energy / hydrogen and carbon
  • Smart Manufacturing
  • New mobility and aerospace
Source:

JEC Group

21.01.2021

Toray Industries, Inc: Textil inspiriert von japanischem Papier

Ein neu entwickeltes Gewebe des Materialtechnologiekonzerns Toray verbindet Haptik und Struktur von handgeschöpftem japanischem Papier mit moderner Funktionalität.

Mit Camifu präsentiert Toray Industries, Inc. ein neuartiges Polyester-Filamentgewebe inspiriert von der Optik und Haptik japanischen Papiers. Das Material basiert auf dem patentierten Mehrkomponenten-Spinnverfahren NANODESIGN, das es Toray erlaubt, unterschiedliche Polymere innerhalb einer Faser präzise anzuordnen und zu formen. Die resultierende Struktur mit ihren feinen Unebenheiten ist der von handgeschöpftem Papier nachempfunden, weist jedoch zugleich die Weichheit und den Komfort synthetischer Fasern auf.

Mithilfe des NANODESIGN-Verfahrens entwickelte Toray eine Faser mit einer flachen, C-förmigen Querschnittstruktur, die drei unterschiedliche Polymere miteinander verbindet. In der Fasermitte befindet sich ein lösliches Polymer, rechts und links davon sind Polymere mit unterschiedlichen Wärmeschrumpfungseigenschaften angeordnet. Eines der Polymere wurde dabei aus recycelten Folienresten hergestellt, um die Nachhaltigkeit von Camifu zu erhöhen.

Ein neu entwickeltes Gewebe des Materialtechnologiekonzerns Toray verbindet Haptik und Struktur von handgeschöpftem japanischem Papier mit moderner Funktionalität.

Mit Camifu präsentiert Toray Industries, Inc. ein neuartiges Polyester-Filamentgewebe inspiriert von der Optik und Haptik japanischen Papiers. Das Material basiert auf dem patentierten Mehrkomponenten-Spinnverfahren NANODESIGN, das es Toray erlaubt, unterschiedliche Polymere innerhalb einer Faser präzise anzuordnen und zu formen. Die resultierende Struktur mit ihren feinen Unebenheiten ist der von handgeschöpftem Papier nachempfunden, weist jedoch zugleich die Weichheit und den Komfort synthetischer Fasern auf.

Mithilfe des NANODESIGN-Verfahrens entwickelte Toray eine Faser mit einer flachen, C-förmigen Querschnittstruktur, die drei unterschiedliche Polymere miteinander verbindet. In der Fasermitte befindet sich ein lösliches Polymer, rechts und links davon sind Polymere mit unterschiedlichen Wärmeschrumpfungseigenschaften angeordnet. Eines der Polymere wurde dabei aus recycelten Folienresten hergestellt, um die Nachhaltigkeit von Camifu zu erhöhen.

Werden diese angrenzenden Polymere wärmebehandelt, verbiegen sie sich entsprechend ihrer jeweiligen Wärmeeigenschaften entlang der Faser. In Verbindung mit der flachen Querschrittstruktur erzeugt dies eine einzigartige Verdrehung und Ausdehnung.
So entstehen Faserbündel mit unregelmäßigen Hohlräumen, die für die charakteristische Unebenheit des Materials sorgen.

Der hohe Anteil an Hohlräumen verleiht dem Gewebe eine leichte und zugleich robuste Haptik, die der von japanischem Papier entspricht. Auch optisch folgt Camifu diesem Vorbild: Die Fasern enthalten unterschiedlich eingefärbte oder einfärbbare Polymere, die sich nicht aneinander ausrichten.

Camifu eignet sich damit für Anwendungen in der Herren- und Damenoberbekleidung, darunter Hemden, Blusen, geschnittene und genähte Kleidungsstücke. Das Unternehmen plant, Camifu ab Frühjahr/Sommer 2022 auf den Markt zu bringen

Source:

Storymaker GmbH

Polyester-Gewebe „Kinari“ (c) Toray
Polyester-Gewebe „Kinari“
16.12.2019

Toray: Neues Polyester-Gewebe „Kinari“

Dank eigener NANODESIGN-Technologie entwickelt Toray einen pflegeleichten Stoff mit glänzendem Finish und luxuriöser Haptik.

Mit „Kinari“ präsentiert Toray Industries, Inc. ein neues Polyester-Filamentgewebe, das sowohl in der Damenoberbekleidung als auch der Herrenkonfektion zum Einsatz kommen kann. Durch den Polyesteranteil ist das Gewebe besonders pflegeleicht, knitterfrei und auch bei Plissees oder Bundfalten sehr formbeständig. Zudem absorbiert das Material Schweiß und trocknet schnell. Anders als herkömmliche Polyestergewebe ist Kinari jedoch außergewöhnlich leicht und luftig, raschelt wie Seide und zeigt einen edlen Glanz. Pünktlich zur Herbst-/Winterkollektion 2020 soll das Gewebe auf den Markt kommen.

Dank eigener NANODESIGN-Technologie entwickelt Toray einen pflegeleichten Stoff mit glänzendem Finish und luxuriöser Haptik.

Mit „Kinari“ präsentiert Toray Industries, Inc. ein neues Polyester-Filamentgewebe, das sowohl in der Damenoberbekleidung als auch der Herrenkonfektion zum Einsatz kommen kann. Durch den Polyesteranteil ist das Gewebe besonders pflegeleicht, knitterfrei und auch bei Plissees oder Bundfalten sehr formbeständig. Zudem absorbiert das Material Schweiß und trocknet schnell. Anders als herkömmliche Polyestergewebe ist Kinari jedoch außergewöhnlich leicht und luftig, raschelt wie Seide und zeigt einen edlen Glanz. Pünktlich zur Herbst-/Winterkollektion 2020 soll das Gewebe auf den Markt kommen.

Bei der Entwicklung von Kinari, setzte Toray ein patentiertes NANODESIGN Mehrkomponenten-Spinnverfahren ein. Kinari besteht aus drei verschiedenen Polymeren, die innerhalb der Faser zu einer einzigartigen Querschnittstruktur angeordnet sind. Die teils stark verteilten Polymerströme werden kombiniert und auf Nanoebene in die gewünschten Anordnung gebracht. Das Ergebnis ist ein kleiner Abstand zwischen den Polymerfasern, der dem Gewebe Volumen und die luftige Textur von Seide verleiht.

Die Eigenschaften von Seide möglichst gut zu imitieren ist seit langem ein treibendes Ziel in der Kunstfaserentwicklung. Mit der eigenen Forschung der letzten fünfzig Jahre möchte Toray natürliche Seide jedoch nicht nur reproduzieren, sondern übertreffen. Die ersten Schritte in diese Richtung machte das Unternehmen mit SILLOOK, einem seidigen Polyestergewebe mit einer Qualität und Haptik, die mit Naturfasern nicht zu erreichen ist. Bei der Entwicklung von Kinari kombinierte Toray diese langjährige Erfahrung mit der eigenen NANODESIGN-Technologie, um eine besonders seidige, hochwertige Haptik zu erzeugen.

Toray möchte Kinari für High-End-Anwendungen in der nationalen und internationalen Textilbranche vermarkten. Gerade in der Bekleidungsbranche sieht das Unternehmen viele Ansatzpunkte für innovative neue Produkte im hochpreisigen Luxussegment. 200.000 Meter Stoff möchte Toray im ersten Jahr verkaufen, bis zum dritten Jahr soll der Absatz auf 500.000 Meter steigen.

07.11.2019

JEC ASIA 2019

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

More than 200 companies from 49 countries will attend this new edition for three days of Composites Innovation, Business, and Networking. For its 12th edition, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific and specifically from South Korea. They will present their latest capabilities and innovations to the composite’s community and the strategic end-user’s market. Companies like Toray Advanced Materials, Hyosung, Kolon, Hanwha Q Cells & Advanced Materials, Hankuk Carbon, Arkema Korea, and Samyang Corp. are amongst the participants, to name a few.

“The Composites Industry in Asia Pacific is dynamic and largely contributes to the global growth of the Industry. JEC Asia is the major composites platform in the region, where the full value chain gathers from raw material producers, intermediate and final processors. It also encompasses the downstream of the value chain, the original equipment manufacturers (OEM), and end-users. For its 12th edition, JEC Asia will showcase numerous features: an extensive conference program that includes the ICF (International Carbon Festival co-organized with the KCTech), composites tours and the coveted JEC Innovation Awards etc. All these have been crafted to provide the composites industry with targeted networking opportunities and an unrivaled event to develop and share knowledge on composite materials”, says Christian STRASSBURGER, Events Director APAC.

Source:

JEC Group

23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

28.08.2019

Toray übernimmt Alva Sweden AB

Toray Industries, Inc. gab bekannt, Verhandlungen mit AB Anders Westerlind zur Übernahme von Alva Sweden AB (ASE) abgeschlossen zu haben. Demnach akquiriert Toray sowohl ASE, einen Hersteller von Airbag-Kissen im Automobilbereich, als auch die beiden Tochtergesellschaften Alva Confecções S.A. (Portugal) und Alva Tunisia S.A. (Tunesien, in der Folge gemeinsam als „Alva“ bezeichnet). Das japanische Unternehmen übernimmt alle Anteile von ASE, welches sich zu 100 Prozent im Besitz von AB Anders Westerlind befindet. Die Transaktion wird unmittelbar nach Abschluss der erforderlichen behördlichen Verfahren abgeschlossen.

Toray Industries, Inc. gab bekannt, Verhandlungen mit AB Anders Westerlind zur Übernahme von Alva Sweden AB (ASE) abgeschlossen zu haben. Demnach akquiriert Toray sowohl ASE, einen Hersteller von Airbag-Kissen im Automobilbereich, als auch die beiden Tochtergesellschaften Alva Confecções S.A. (Portugal) und Alva Tunisia S.A. (Tunesien, in der Folge gemeinsam als „Alva“ bezeichnet). Das japanische Unternehmen übernimmt alle Anteile von ASE, welches sich zu 100 Prozent im Besitz von AB Anders Westerlind befindet. Die Transaktion wird unmittelbar nach Abschluss der erforderlichen behördlichen Verfahren abgeschlossen.

Markthintergrund
Der weltweite Airbag-Markt wächst stetig. Verschärfte Sicherheitsvorschriften in Industrieländern und der zunehmende Einsatz von Airbags in Schwellenländern steigern die Nachfrage. Eine neue Fahrzeuggeneration, die autonomes Fahren und andere fortschrittliche Technologien umfasst, stellt auch neue Anforderungen an Sicherheitssysteme wie leistungsfähige Airbags.
Das aktuelle Airbag-Geschäft von Toray umfasst die Produktion von Nylonfasern in Japan, Thailand und Mexiko sowie Produktionsstätten für Airbag-Stoffe in Japan, Thailand, China, der Tschechischen Republik, Indien und Mexiko. Diese integrierte Faser- und Gewebekompetenz, gemeinsam mit einem globalen Produktions- und Vertriebsnetzwerk, ermöglicht es Toray, Airbag-Stoffe in gleichbleibender Qualität von jedem Produktionsstandort aus zeitnah zu liefern.

Alva produziert seit 1997 Airbag-Kissen für die Automobilbranche in Europa. Mit unternehmenseigenen Technologien, Fachkompetenz und modernsten Produktionsanlagen genießt das Unternehmen bei den führenden europäischen Modulherstellern einen ausgezeichneten Ruf.

Hintergrund und Ziele der Übernahme
Toray beliefert Alva bereits mit Stoffen für die Airbag-Produktion und konnte so im Laufe der Jahre eine gute Beziehung zum Unternehmen aufbauen. Erste Gespräche zu einer möglichen Übernahme begannen 2018. Toray verfolgte dabei das Ziel, die Integration entlang der ganzen Lieferkette weiter voranzutreiben. Demnach umfasst das Anbot neben der Faser- und Gewebe-Produktion nun auch die nachgelagerte Herstellung der Airbag-Kissen. Der Ausbau des eigenen Airbag-Geschäft ist eine Antwort auf die beschriebenen veränderten Marktbedingungen.

Mit der Übernahme möchte Toray die direkten Beziehungen zu Modulherstellern und letztlich auch zu Automobilherstellern verbessern. Das Unternehmen hofft, die Bedürfnisse der Kunden und neueste Trends bei der Airbag-Entwicklung so schneller erkennen zu können. Die Expertise von Alva bei der Herstellung von Airbag-Kissen erlaubt es Toray, Kompetenzen von der Faser über das gewebte Material bis zum fertig genähten Produkt stärker zu bündeln. Damit baut das Unternehmen sein Angebotsportfolio aus und erhofft sich Vorteile bei der Produktentwicklung. Durch eine stärkere Präsenz bei Modul- und Automobilherstellern möchte der japanische Materialtechnologiekonzern zudem einen Beitrag zur Weiterentwicklung von Hochleistungs-Airbags leisten.

Toray ist bestrebt, sein Airbag-Geschäft weiter auszubauen, um von der starken Nachfrage in diesem vielversprechenden Markt zu profitieren.

More information:
Toray Toray Advanced Composites
Source:

Toray International Europe GmbH

 

(c) Toray Industries Europe GmbH
18.04.2019

Toray mit Flammschutzgewebe GULFENG auf der Techtextil

In unterschiedlichen Ausführungen, von Papier bis zu dickem Filz, dient das Material als Brandschutz in elektronischen Geräten, Sitzpolstern und anderen Anwendungen. GULFENG gibt es als dünnes Papier, gewebt, oder gefilzt.
 
Vom 14. bis 17. Mai 2019 präsentiert der japanische Materialtechnologie-Riese Toray die Funktionstextilien des Unternehmens auf der Techtextil in Frankfurt. Ein Highlight ist dabei das neue Flammschutzgewebe GULFENG, das hervorragende flammhemmende Eigenschaften besitzt und als Flammenbarriere dient. Das Gewebe ist in verschiedenen Ausführungen erhältlich und somit für ein breites Anwendungsspektrum geeignet.

Im Vergleich zu anderen flammhemmenden Materialien, die aus Glasfaser-, m- und p-Aramid- oder Ox-PAN-Filz bestehen, ist GULFENG leichter, dünner und flexibler. Die Papiervariante ist 0,06 mm dick und wiegt 60 g/m² – sie sieht wie normales Papier aus und fühlt sich auch so an. Zusätzlich kann das Material zu einem weichen Stoff gestrickt oder gewoben und zu biegsamen Matten gefilzt werden. Durch diese Vielfalt eigenet sich GULFENG für Batterien ebenso wie für Bettwäsche oder Bussitze.

In unterschiedlichen Ausführungen, von Papier bis zu dickem Filz, dient das Material als Brandschutz in elektronischen Geräten, Sitzpolstern und anderen Anwendungen. GULFENG gibt es als dünnes Papier, gewebt, oder gefilzt.
 
Vom 14. bis 17. Mai 2019 präsentiert der japanische Materialtechnologie-Riese Toray die Funktionstextilien des Unternehmens auf der Techtextil in Frankfurt. Ein Highlight ist dabei das neue Flammschutzgewebe GULFENG, das hervorragende flammhemmende Eigenschaften besitzt und als Flammenbarriere dient. Das Gewebe ist in verschiedenen Ausführungen erhältlich und somit für ein breites Anwendungsspektrum geeignet.

Im Vergleich zu anderen flammhemmenden Materialien, die aus Glasfaser-, m- und p-Aramid- oder Ox-PAN-Filz bestehen, ist GULFENG leichter, dünner und flexibler. Die Papiervariante ist 0,06 mm dick und wiegt 60 g/m² – sie sieht wie normales Papier aus und fühlt sich auch so an. Zusätzlich kann das Material zu einem weichen Stoff gestrickt oder gewoben und zu biegsamen Matten gefilzt werden. Durch diese Vielfalt eigenet sich GULFENG für Batterien ebenso wie für Bettwäsche oder Bussitze.

Trotz der geringen Dicke büßt GULFENG seine flammhemmenden Eigenschaften nicht ein und dient als Flammenbarriere. Ein Feuer kann sich nicht ausbreiten oder umliegende brennbare Materialien entzündet. Um dies zu erreichen kombiniert Toray thermoplastisches Polyphenylensulfid (PPS) mit oxidierten Polyacrylnitrilfasern (OX-PAN). Erwärmt eine Flamme das Material auf 285°C, beginnen die PPS-Fasern zu schmelzen und bilden eine dünne Membran um die Ox-PAN-Fasern. Diese absorbieren Wärme und oxidieren, wodurch eine vollständig geschlossene Barriere gegen die Flammen entsteht. In Flugzeugen und Zügen wird GULFENG als Fammenbarriere in Sitzkissen verwendet.

More information:
Toray Toray Advanced Composites
Source:

Storymaker GmbH