From the Sector

Reset
41 results
Checkpoint Systems: Research Report „Utilising RFID in Retailing: Insights on Innovation“ (c) Checkpoint Systems GmbH
25.06.2021

Checkpoint Systems: Research Report „Utilising RFID in Retailing: Insights on Innovation“

A research report released today has revealed the innovative new ways retailers are using RFID technology in-store to improve profitability. Authored by Emeritus Professor Adrian Beck from the University of Leicester and the ECR Retail Loss Group and supported by Checkpoint Systems, Utilising RFID in Retailing: Insights on Innovationhighlights how companies are employing the technology for a broader range of purposes. It demonstrates the value the technology is bringing to their businesses and ultimately, the impact it is delivering to their bottom line. Crucially, it also shows thatmore retailers than ever are recognizing the benefits of RFID and driving uptake within their organisations. The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

A research report released today has revealed the innovative new ways retailers are using RFID technology in-store to improve profitability. Authored by Emeritus Professor Adrian Beck from the University of Leicester and the ECR Retail Loss Group and supported by Checkpoint Systems, Utilising RFID in Retailing: Insights on Innovationhighlights how companies are employing the technology for a broader range of purposes. It demonstrates the value the technology is bringing to their businesses and ultimately, the impact it is delivering to their bottom line. Crucially, it also shows thatmore retailers than ever are recognizing the benefits of RFID and driving uptake within their organisations. The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

In particular, more and more retailers reported using RFID to streamline the audit process (as an alternative to infrequent organisational stock takes), which not only delivers considerable cost savings, but also provides more regular insights into the status of inventories. It also found that using RFID was having a significant impact on store processes. While RFID has always been key to inventory accuracy, some companies are now using this data to further improve business activities such as reducing phantom out of stocks, improving rapid stock search and find tasks and developing an efficient ship from store (SFS) capability.

Beyond the more traditional retail model, RFID was seen as a key facilitator in delivering omnichannel retailing by all those questioned. Without the inventory accuracy offered by RFID, few retailers believed they could reliably use their stores as fulfilment centres to output online orders. Indeed, one retailer admitted to only making RFID-enabled store stock available for this purpose. The use of RFID to improve online order accuracy is also becoming more commonplace, to reduce errors in the picking and packing process, therefore improving customer satisfaction. One retailer reported a 90% reduction in incorrect orders and customer complaints since introducing RFID into the process.

Looking to the future, one area where the benefits of RFID are starting to be tested is self-checkouts (SCO). While currently limited due to the need to have a 100% SKU tagging strategy in place, retailers are starting to recognize the benefits the technology could offer including increased speed of checkout, reduced likelihood of double scanning and thereby improved customer service. Another area where retailers also reported reaping the benefits of RFID was loss prevention. While none of those interviewed argued that reducing loss was the primary reason for investing in RFID, many acknowledged they were benefiting from it by using the technology to tackle refund frauds, enable dynamic loss product profiling, manage e-frauds and identify stolen products.

Source:

Checkpoint Systems GmbH / Carta GmbH

15.06.2021

EURATEX Statement on the EU-US Summit

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

The European textile and apparel industry welcomes the organisation of the EU-US Summit in Brussels, and hopes that political leaders will launch a new era of closer cooperation across the Atlantic. Both the Covid19 pandemic and recent geopolitical tensions call for global solutions; the EU and the US should take a leadership role in developing that new global framework.

EU-US trade in textiles and apparel have dropped by nearly 20% in 2020 (just under €6 bln), while imports from other countries, in particular China, have increased spectacularly (+45% into the EU). At the same time, global supply chains came under pressure, and access to certain raw materials for the industry became difficult and costly.

Against this background, EURATEX does not call for protectionism, but a better functioning of global supply chains, with common rules which are applied by all. The EU and US authorities should put their full influence to establish a level playing field for our industry across the globe, promoting environmental and social standards. Sustainable and circular textiles should become the norm, thus contributing to a greener planet and creating high quality jobs.  

At bilateral level, the EU and US should resume their work on mutual recognition of standards and certification procedures, thus saving considerable costs for our companies while maintaining the highest safety standards. Custom procedures can be simplified on both sides, and joint research, e.g. in smart textiles, should be promoted.

EURATEX welcomes the recent progress in provisionally eliminating additional duties on several American and European products due to the Airbus-Boeing trade dispute. It is a very positive sign that EURATEX would like to highlight in a particularly difficult context for the textile and clothing industry at European, American and even global levels. EURATEX calls on both US and EU institutions to eliminate such duties permanently and build on a common positive agenda for the benefit of EU and US companies and consumers.

EURATEX Director General Dirk Vantyghem commented: "Both the EU and US are developing a new business model for their industry. We should make sure these models can complement and reinforce each other. If not, we risk losing global leadership, not just in terms of market share but also in terms of values and standards."

09.06.2021

EURATEX calls for an effective EU Industrial strategy

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

On the occasion of releasing its 2021 Spring Report, EURATEX calls the European Institutions to implement a new Industrial Strategy which will effectively support the European textiles industry. EURATEX welcomes the fact that Textile and Clothing industry is recognised as one of the 14 essential ecosystems of the European economy, but we need to take effective measures to support these sectors, and take into consideration the global dimension.

Economic data for 2020 in EURATEX Spring Report show preoccupying trends. Figures reflect a dramatic contraction in demand and production: EU turnover contracted by -9.3% in textiles (which is in line with the general manufacturing average) and by -17.7% in clothing, compared with 2019. Furthermore, supply chain disruptions and substantial price increases of some raw materials are putting significant pressure on the T&C industries across Europe. The trade deficit for European textiles and clothing jumped from € -47 bln in 2019 to € -62 bln in 2020, an increase of more than 30%, which is almost entirely due to the import of Chinese face masks and related products. Fortunately, more recent figures from the 1st quarter of 2021 indicate some signs of recovery.

That figure illustrates very well today’s political discussions on the future of the European industry. Many European companies have made considerable efforts to adapt their production to the pandemic, but clearly this was not enough. Whether the production cost in Europe is too high or the EU should adapt its procurement rules, the industry needs have a coherent long-term plan to become more competitive and conquer new markets.

EURATEX General Assembly highlighted the critical role of the new EU Industrial Strategy. The inclusion of textiles and clothing in the fourteen ecosystems is a step in the right direction to consolidate the industrial base but we should look also at the global challenges. European companies should continue investing in innovation, design and quality, in combination with a structural move towards more sustainable textiles. At the same time, the EU should create an environment - both inside the Single Market and globally - where everybody plays by the same rules.

Source:

Euratex

EURATEX and IAF conventions take place from 7 to 9 November 2021 (c) EURATEX
31.05.2021

EURATEX and IAF conventions take place from 7 to 9 November 2021

From 7 to 9 November 2021, the world of apparel and textiles will meet in Antwerp, Belgium, for a double convention: the 36th World Fashion Convention on 7-8 November, hosted by IAF, and the 9th European Textiles and Apparel Convention on 8-9 November, hosted by EURATEX.

Delegates can choose to register for the IAF’s 36th World Fashion Convention, for EURATEX’s 9th European Textiles and Apparel Convention or for a combination of both, which the organisers of course recommend. The IAF Convention, carrying the theme ‘Transition of the Global Fashion System’ focusses on global industry developments whereas the EURATEX convention, themed “A new paradigm for the European Textiles and Clothing Industry”, has a strong European focus. Therefore, the two conventions are perfectly complementary.

The Antwerp Convention will be the first ‘live’ meeting for the industry in nearly two years’ time. That’s why the convention will combine knowledge with social events, notably the IAF and EURATEX joint networking dinner on 8 November in the Antwerp Fashion Museum.

From 7 to 9 November 2021, the world of apparel and textiles will meet in Antwerp, Belgium, for a double convention: the 36th World Fashion Convention on 7-8 November, hosted by IAF, and the 9th European Textiles and Apparel Convention on 8-9 November, hosted by EURATEX.

Delegates can choose to register for the IAF’s 36th World Fashion Convention, for EURATEX’s 9th European Textiles and Apparel Convention or for a combination of both, which the organisers of course recommend. The IAF Convention, carrying the theme ‘Transition of the Global Fashion System’ focusses on global industry developments whereas the EURATEX convention, themed “A new paradigm for the European Textiles and Clothing Industry”, has a strong European focus. Therefore, the two conventions are perfectly complementary.

The Antwerp Convention will be the first ‘live’ meeting for the industry in nearly two years’ time. That’s why the convention will combine knowledge with social events, notably the IAF and EURATEX joint networking dinner on 8 November in the Antwerp Fashion Museum.

Previous speakers at the EURATEX and IAF conventions came from PVH, Hugo Boss, Zegna, as well as European Commission, McKinsey, OECD, and London College of Fashion. About 150 delegates at each event, from over 20 countries are expected.

For more information click here.

Source:

EURATEX

ANDRITZ receives order for a new batt forming line for stitchbonding from Pratrivero, Italy (c) ANDRITZ
ANDRITZ eXcelle crosslapper
17.05.2021

ANDRITZ receives order for a new batt forming line for stitchbonding from Pratrivero, Italy

International technology Group ANDRITZ has received an order from Pratrivero s.p.a. to supply a new eXcelle batt forming line for their production facilities in Valdilana, Italy. The line will be dedicated to the production of Maliwatt products, used in furnishing, automotive, naval, medical, geotextiles, advertising, clothing, and packaging applications. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ batt forming line includes an eXcelle card and eXcelle crosslapper, a ProDyn™ web profiling correction system as well as a scanning gauge with a closed loop. The ProDyn system combines actions from the card doffers with dynamic speed variation at the crosslapper. This will result in substantial fiber savings and reduction in CV%, providing improved weight evenness in the final product. The ProDyn closed loop will ensure the best possible self-regulation for the equipment and thus enable Pratrivero to produce one of the best product qualities on the market. Pratrivero will be the world’s first company to use the ProDyn technology in the Maliwatt stitchbonding process.

International technology Group ANDRITZ has received an order from Pratrivero s.p.a. to supply a new eXcelle batt forming line for their production facilities in Valdilana, Italy. The line will be dedicated to the production of Maliwatt products, used in furnishing, automotive, naval, medical, geotextiles, advertising, clothing, and packaging applications. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ batt forming line includes an eXcelle card and eXcelle crosslapper, a ProDyn™ web profiling correction system as well as a scanning gauge with a closed loop. The ProDyn system combines actions from the card doffers with dynamic speed variation at the crosslapper. This will result in substantial fiber savings and reduction in CV%, providing improved weight evenness in the final product. The ProDyn closed loop will ensure the best possible self-regulation for the equipment and thus enable Pratrivero to produce one of the best product qualities on the market. Pratrivero will be the world’s first company to use the ProDyn technology in the Maliwatt stitchbonding process.

Stitchbond is a nonwoven process made by mechanically interlocking fiber webs with continuous filaments, thus imitating textiles. Stitchbonded products are used in many applications due to their lower production costs compared to woven textiles. Among all the different nonwoven processes in which it operates, ANDRITZ is also a market-leading supplier of batt forming equipment for the stitchbonding processes producing Maliwatt, Malivlies and quilting.

Pratrivero is an important player in the production of nonwoven fabrics using stitchbonding technology.

06.05.2021

PERFORMANCE DAYS Fair with Topic: Still Physical – Your Success Story of 2020

Contact restrictions, home office and altered daily lives – our lives in 2020 were radically changed. This was also the case for various sectors of the economy, including the textile and clothing industry. However, with crisis come opportunities and stimuli for change. Under the motto “Still Physical”, manufacturers recount their personal success stories in 2020 – the industry can look forward to a selection of sustainable materials curated exclusively by the PERFORMANCE FORUM Jury. Areas of focus: natural fibers that highlight wellbeing aspects, plant-based materials that make us strong and excite on an emotional level, bio-nylons and bio-based finishings that rethink function. “Still Physical – Your Success Story of 2020” will be on display online as the first of its kind within a trade fair week from 17 to 21 May 2020.

Contact restrictions, home office and altered daily lives – our lives in 2020 were radically changed. This was also the case for various sectors of the economy, including the textile and clothing industry. However, with crisis come opportunities and stimuli for change. Under the motto “Still Physical”, manufacturers recount their personal success stories in 2020 – the industry can look forward to a selection of sustainable materials curated exclusively by the PERFORMANCE FORUM Jury. Areas of focus: natural fibers that highlight wellbeing aspects, plant-based materials that make us strong and excite on an emotional level, bio-nylons and bio-based finishings that rethink function. “Still Physical – Your Success Story of 2020” will be on display online as the first of its kind within a trade fair week from 17 to 21 May 2020.

Transformation: Technology first?
The pandemic has forced us into new, primarily digital forms of living and working. Our daily lives are characterised by home offices, home schooling and online meetings. The desire for real, physically perceptible experiences has grown incessantly within the last year. In the same context, people nowadays are strongly driven by technological progress – yet how far can we allow technological change to go and how do we wish to live in the future? Long before the pandemic, the trend towards self-monitoring and control of important bodily functions developed. The sports industry developed tools to measure levels of performance and monitor bodily functions with the goal of enhancing performance. Self-optimisation, body shaping and health promotion have become standard nowadays. Staying healthy and keeping fit are now social imperatives in our performance-oriented society. The pandemic has made us rethink, made us pause – with sustainable function still in focus, yet function needs to be rethought for the future, distancing ourselves from mere performance enhancement, and embracing clothing that facilitates people in feeling good.

Touch & Feel
In a visual, digital world, one sense has been forgotten: the sense of touch. Materials trigger completely different reactions, consciously or unconsciously. Moreover, the surface texture is also decisive in the functionality of a fabric, lending it its unique characteristics. In times of contact restrictions and lockdown, there is a need for a space for emotions, for regeneration and physical wellbeing. This is also reflected in the desire for appropriate apparel that leaves a pleasant sensation on the skin. Lightweight, warm and of a softer nature, plant-based fibers fulfil the desire for comfort and promote wellbeing.

We are physical – we are nature
How will we shape and adapt the post-pandemic textile and apparel industry? The Corona crisis once again reminds us of our existential bond with the natural world. While humanity fights against the spread of a deadly virus with social isolation, one thing is doing well: our planet. It is recovering from all the exhaust gases that are released into the air daily by cars and factories. There is a shift in focus towards taking time out in nature, whether in the form of a morning run, a mountain hike or a yoga session on the grass.

Your success story of 2020
What has touched them? Which experiences have shaped their latest innovations? Does the crisis also present opportunities? The chance for something new, for a rethink, on an even more sustainable, more ecological path? Which highlights, which stories are worth communicating and where did the focus lie in 2020? Various material manufacturers already started to focus on sustainability and the cautious use of resources some time ago. Innovations in the areas of materials and in processing methods are the driving forces of the development towards more sustainability. However, we need to realign all processes and structures in our supply and production chains and adapt them to the needs of a resource-conserving, responsible industry. A pioneering example of such alignment was the decision of PERFORMANCE DAYS to only present sustainable materials at the PERFORMANCE FORUM from the November 2019 trade fair event onwards. Additionally, the setting-up of the new digital sourcing platform “THE LOOP” shows how technology can be implemented aside from material and processing innovations in such a way that our procedures and structures can be adapted to difficult conditions.

Informative & up-to-date: the digital trade fair week from 17 to 21 May 2021
As usual, the highlighted fabrics from the Focus Topic “Still Physical”, which the exhibitors have defined as their personal success stories, will be available shortly on the PERFORMANCE DAYS website highlighting all details and facets.

04.05.2021

C.L.A.S.S.: THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

How to recognize truly sustainable fashion? How can responsible recycling of garments and fabrics - as well as new formulas for circular economy - make a difference in fighting the climate emergency? These are just some of the topics addressed during THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM, the open-ended program of virtual meetings with some of the most influential fashion and sustainability experts organized by the Museo del Tessuto di Prato in collaboration with C.L.A.S.S. ecohub.

The museum and the international platform that creates awareness and supports professionals who believe in fashion and sustainable textiles have joined forces to talk not only to fashion enthusiasts but to everyone, and explore a hot and often underestimated topic that involves everyday life. The series of meetings deepens and complements the new section entirely dedicated to circular textiles in the museum's Textile Library.

Like a real symposium, THE TEXTILE LIBRARY CIRCULAR SYMPOSIUM is a conversation arena involving 10 game changers who have been able to innovate not only with high-tech and responsible products and materials but also with new formulas, business models and production systems that respect the planet and people. Among the speakers of the cycle, visionary innovators who generate change at all levels: from the entire production system and beyond to retailers, leading international brands, research companies and communication experts, all the way to the final consumer.

The first appointment is Wednesday, May 13 at 5 pm CEST with the talk THE SUSTAINABLE PERSPECTIVE. True sustainable fashion is a choral and capillary system in which every actor plays a fundamental role. During the meeting, professionals from different fields, from cultural institutions to industrial production, from marketing to retail, will share their perspective on sustainability.

Recycling is the key word in THE SECOND CHANCE, the second meeting scheduled for June 10 h. 5 p.m CEST.

On September 29, also at 5 p.m. CEST, appointment for the talk A TICKET TO FASHION... AND BACK entirely dedicated to the new models of circular economy.

You can register here.

Source:

C.L.A.S.S. / GB Network Marketing & Communication

29.04.2021

ISKO launches bluesign® APPROVED fabrics

ISKO announced the launch of bluesign® APPROVED fabrics. The only denim mill in Europe with bluesign® APPROVED fabrics, and one of the highest achievement’s in sustainability. This won honour is only awarded to those that meet the strict safety and environmental requirements of the bluesign® CRITERIA. These certified articles are made from bluesign® APPROVED chemicals and raw materials, and are manufactured with a minimum impact on people and the environment. This enables brands to provide safe products to their consumers, verified as bluesign® PRODUCT, which are sustainably produced without hazardous chemicals.

“When the goal is big, the effort is big. Choosing the right partner means taking safe steps. In this sense, I can gladly say that we will continue on our way with the bluesign® chemical followup process.” – Ebru ÖZKÜÇÜK, Head of Sustainability ISKO.

Through this partnership and certification, ISKO and bluesign® continue their vision of a textile and fashion industry with a future that focuses more attention on people and the environment, because only when both are considered can the industry truly make a positive, long-lasting impact.

ISKO announced the launch of bluesign® APPROVED fabrics. The only denim mill in Europe with bluesign® APPROVED fabrics, and one of the highest achievement’s in sustainability. This won honour is only awarded to those that meet the strict safety and environmental requirements of the bluesign® CRITERIA. These certified articles are made from bluesign® APPROVED chemicals and raw materials, and are manufactured with a minimum impact on people and the environment. This enables brands to provide safe products to their consumers, verified as bluesign® PRODUCT, which are sustainably produced without hazardous chemicals.

“When the goal is big, the effort is big. Choosing the right partner means taking safe steps. In this sense, I can gladly say that we will continue on our way with the bluesign® chemical followup process.” – Ebru ÖZKÜÇÜK, Head of Sustainability ISKO.

Through this partnership and certification, ISKO and bluesign® continue their vision of a textile and fashion industry with a future that focuses more attention on people and the environment, because only when both are considered can the industry truly make a positive, long-lasting impact.

22.04.2021

Lenzing Group: Sustainability Report 2020

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes.

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

 

*See attached document for more information..

19.04.2021

Checkpoint expands its feature HALO platform

Checkpoint  Systems, the vertically integrated solutions provider for retail, has announced the expansion of its HALO®Internet of Things (IoT) RFID software platform with the release of HALO 12.2.0.

Building on the software platform, this latest release includes a number of new features that will elevate it further.:

Checkpoint  Systems, the vertically integrated solutions provider for retail, has announced the expansion of its HALO®Internet of Things (IoT) RFID software platform with the release of HALO 12.2.0.

Building on the software platform, this latest release includes a number of new features that will elevate it further.:

  • Enhanced replenishment capabilitiesmaking picking and sales floor stocking easier, faster and more efficient. This saves retailers time, improves the customer shopping experience and drives increased revenue
  • Expanded in-store receiving capabilities, providing stores with improved insights into stock arrivals, driving sales by ensuring the stock gets onto the sales floor faster
  • Enhanced omnichannel in-store fulfilment with expanded shipping and packing capabilities. Retailers can make the most efficient use of their bricks and mortar stores to handle omnichannel purchases
  • Continued expansion of RFID label options with new tagging features that are compatible with a wide variety of label options, providing easy-to-use processes that make a store associate’s job more efficient every day
  • Expanded reporting capabilities provides a comprehensive performance overview of the business with metrics on KPIs that facilitate enterprise-wide successes all in one easy-to-access location
  • Increased RFID device options, making the software  platform compatible with a wider range of devices already deployed by stores
  • More inventory count options via new standard  API that simplifies connections to different fixed sensors, robots and drones. This makes the stock counting process more accurate and efficient
  • Expanded translation capabilities, facilitating quick and efficient customisation to local dialects so that HALO can be deployed fasteracross an international estate.
14.04.2021

NCTO requests Agency to grant Approval for Collection of China 301 Duties

National Council of Textile Organizations (NCTO) President and CEO Kim Glas sent a letter to Acting Director of the Office of Management and Budget (OMB) Robert Fairweather, requesting the agency reconsider and approve a proposal to direct U.S. Customs and Border Protection (CBP) to collect Section 301 penalty duties on billions of dollars of Chinese goods currently shipped duty free under Section 321 de minimis waivers.

“There has been an exponential growth of shipments to the United States in recent years that qualify for Section 321 duty-free treatment,” Glas said in the letter. “U.S. manufacturers of textiles, apparel and other consumer goods that routinely sell for less than the $800 de minimis threshold increasingly find their markets and workforce threatened by this tariff avoidance scheme.”

The letter details how the current Section 321 provision is now being coupled with e-commerce to provide billions in duty avoidance on these imported products, including:

National Council of Textile Organizations (NCTO) President and CEO Kim Glas sent a letter to Acting Director of the Office of Management and Budget (OMB) Robert Fairweather, requesting the agency reconsider and approve a proposal to direct U.S. Customs and Border Protection (CBP) to collect Section 301 penalty duties on billions of dollars of Chinese goods currently shipped duty free under Section 321 de minimis waivers.

“There has been an exponential growth of shipments to the United States in recent years that qualify for Section 321 duty-free treatment,” Glas said in the letter. “U.S. manufacturers of textiles, apparel and other consumer goods that routinely sell for less than the $800 de minimis threshold increasingly find their markets and workforce threatened by this tariff avoidance scheme.”

The letter details how the current Section 321 provision is now being coupled with e-commerce to provide billions in duty avoidance on these imported products, including:

  • Increased import price pressure on domestic manufacturers of various types of consumer items that routinely sell for less than $800 such as – apparel, footwear, home furnishings, toys, consumer electronics, flatware, auto parts, etc.
  • An inability to properly identify and block the importation of adulterated products posing a health and safety risk to consumers.
  • An inability to properly identify and block imports of counterfeit products that violate intellectual property laws.
  • Enhanced ability of countries like China to access the U.S. market, despite their failure to provide reciprocal access to their markets and their persistent illegal and unfair trading practices.

“Imported merchandise from China that enters under a Section 321 waiver is exempt from all normal tariffs and any penalty duties assessed under the current 301 case. This unreasonable and unnecessary duty exemption severely undermines the purpose and value of the existing Section 301 determination against China as an effort to address its longstanding predatory trade practices,” Glas stated.

“The Biden administration should undertake an exhaustive review of this problem to develop the policy changes needed to mitigate the damaging impact of Section 321 waivers on U.S. workers and manufacturers,” Glas added. “In the interim, it is critical that the OMB and CBP take reasonable steps, such as denying Section 321 benefits to goods covered under the existing China 301 determination [tariffs]. Doing so would be a valuable first step toward limiting the dangerous and growing exploitation of this tariff waiver mechanism.”

See the full letter here.

12.04.2021

SUPREME GREEN COTTON® used by Italian brand Diesel

SUPREME GREEN COTTON® has been chosen by the Italian brand Diesel for the ‘Green Label’, ‘NightCrush’ and ‘Malign’ jersey T-shirts. From cotton seed to fiber, yarn production, fabric and final garments, the full supply chain is not just transparent but located in a very focused area 100% in Greece.
 
SUPREME GREEN COTTON® is the premium quality smart yarn collection by Varvaressos S.A. European Spinning Mills. The Greek yarn manufacturer has developed an innovative and socially responsible system from the seed to the garment that supports farmers and businesses at the foothills of Mount Olympus.
 

SUPREME GREEN COTTON® has been chosen by the Italian brand Diesel for the ‘Green Label’, ‘NightCrush’ and ‘Malign’ jersey T-shirts. From cotton seed to fiber, yarn production, fabric and final garments, the full supply chain is not just transparent but located in a very focused area 100% in Greece.
 
SUPREME GREEN COTTON® is the premium quality smart yarn collection by Varvaressos S.A. European Spinning Mills. The Greek yarn manufacturer has developed an innovative and socially responsible system from the seed to the garment that supports farmers and businesses at the foothills of Mount Olympus.
 
SUPREME GREEN COTTON® uses a customized satellite-powered drip irrigation system in the fields that allows saving up to 40% of water. Water usage is one of the pressing issues in cotton production. Thanks to the advanced drip irrigation system, plants are watered and fed without wasting a single drop. Thanks to a custom-developed app connected via satellite and meteorological stations in selected cotton fields, farmers can monitor the fields in real time. The IoT – Internet of Things system warns them to take action to ensure plants to flourish healthily and high a higher yield in a sustainable way.
 
The smart yarns are Made in Greece and have been certified by MADE IN GREEN by OEKO-TEX® which assures transparency and traceability, moreover the company has also obtained the STeP by OEKO-TEX®.

12.04.2021

We aRe SpinDye collaborates with Gina Tricot

We aRe SpinDye (WRSD) and Gina Tricot have entered into a collaboration agreement. The partnership formed between the two companies is a strategic milestone for both parties.

"Gina Tricot has made impressive progress in the area of sustainability recently and it is fantastic that we get the opportunity to participate and contribute going forward", says Andreas Andrén, CEO of WRSD and continues: "The collaboration is completely in line with our ambitions to become an industry standard for coloring recycled polyester."

Gina Tricot is a Swedish brand that offers fashion to women in over 30 countries.
"Together with WRSD, we can create a better, more sustainable and circular fashion industry. We are convinced that the future lies in collaboration and innovation between the various tiers of our value chain", says Emma Garrote Fredman, Global production & Sustainability manager at Gina Tricot.

We aRe SpinDye (WRSD) and Gina Tricot have entered into a collaboration agreement. The partnership formed between the two companies is a strategic milestone for both parties.

"Gina Tricot has made impressive progress in the area of sustainability recently and it is fantastic that we get the opportunity to participate and contribute going forward", says Andreas Andrén, CEO of WRSD and continues: "The collaboration is completely in line with our ambitions to become an industry standard for coloring recycled polyester."

Gina Tricot is a Swedish brand that offers fashion to women in over 30 countries.
"Together with WRSD, we can create a better, more sustainable and circular fashion industry. We are convinced that the future lies in collaboration and innovation between the various tiers of our value chain", says Emma Garrote Fredman, Global production & Sustainability manager at Gina Tricot.

02.04.2021

Fashion 4 Development & C.L.A.S.S. launch: The Recloth Resource Guide

Fashion 4 Development & C.L.A.S.S. Eco Hub will launch The Reclothe Resource Guide during the virtual exhibit: Discover the SDGs - To Make Peace With Nature, a virtual hub convened by the United Nations Office for Partnerships April 1 - 30, 2021.

The publication's mission is to inform and educate fashion industry professionals, schools, universities, students, and new generation brands to focus on the next generation of the circular economy and make an impact on the value chain. The ReClothe guide lists all solutions, technologies, fabric suppliers, dyers, and finishers currently available and scalable globally that can really answer the new generation needs of the contemporary consumer. ReClothe will be published quarterly and focus on innovators working the best practices and opportunities in development & manufacturing for a responsible fashion industry.

Fashion 4 Development & C.L.A.S.S. Eco Hub will launch The Reclothe Resource Guide during the virtual exhibit: Discover the SDGs - To Make Peace With Nature, a virtual hub convened by the United Nations Office for Partnerships April 1 - 30, 2021.

The publication's mission is to inform and educate fashion industry professionals, schools, universities, students, and new generation brands to focus on the next generation of the circular economy and make an impact on the value chain. The ReClothe guide lists all solutions, technologies, fabric suppliers, dyers, and finishers currently available and scalable globally that can really answer the new generation needs of the contemporary consumer. ReClothe will be published quarterly and focus on innovators working the best practices and opportunities in development & manufacturing for a responsible fashion industry.

The guide includes Bacx™ by Centro Seta, Bext360, DYNTEX® Biosynthetics, Eastman Naia™, ECOSENSOR™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Iluna Group, Lanificio Zignone, Maeba International, Mending for Good, Modern Meadow, Re.VerSo™, ROICA™ by Asahi Kasei, Santoni, Smartex, Spiber Inc., SUPREME GREEN COTTON® by Varvaressos, TINTEX Textiles, VEGEA and YKK.

For registration click here.

27.03.2021

NCTO: Biden Administration awards Contracts for American-Made Face Masks

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

The Biden Administration has awarded two contracts to National Council of Textile Organizations (NCTO) members Parkdale Mills and Ferrara Manufacturing Inc., following through on the President’s pledge to procure millions of fully Made in America face masks for community health centers, food pantries and soup kitchens across the country.  A third contract is expected to be awarded to a small business early next week.

North Carolina headquartered Parkdale Mills, the nation’s largest cotton yarn spinner, has partnered with Ferrara Manufacturing, a tailored clothing company based in New York City’s garment center whose workforce is union represented by Workers United/SEIU, to manufacture over 17 million reusable masks. The government said it could purchase up to a maximum of 22.2 million masks under the two contracts announced today. The masks will be Berry compliant and thus 100% U.S.-made.

Ferrara Manufacturing and Parkdale Mills will contract with additional U.S. companies across the manufacturing supply chain, employing nearly 5,000 American workers as a result of these awards.  Parkdale will be utilizing yarn from their facilities in NC, VA, and GA and Ferrara will deploy their cut and sew operations in New York City.

The U.S. textile industry has produced over a billion lifesaving PPE and other medical products over the last year.  Since the spring of 2020, both Ferrara and Parkdale have retooled their production chains to help produce millions of masks and gowns to help workers on the frontlines. 

24.03.2021

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

National Council of Textile Organizations (NCTO) Chairman David Roberts, who was re-elected for the 2020-2021 term, delivered the trade association’s State of the U.S. textile industry overview at NCTO’s 17th Annual Meeting on March 24.

Mr. Roberts’s speech outlined (1) the U.S. textile industry’s heroic efforts producing PPE in the face of a once-in-a-generation pandemic (2) U.S. textile supply chain, economic, trade data, and (3) NCTO’s 2020 policy priorities for domestic textile manufacturers.

A link of his remarks as prepared for delivery are included in this press statement along with a link to a data infographic prepared by NCTO illustrating the current economic status of the U.S. textile industry.

Mr. Roberts is CEO of Cap Yarns, Inc., a South Carolina specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO’s annual meeting was held virtually March 23-24.

24.03.2021

NCTO elects Chairman, Council Chairs and Board Members

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2021 today.

NCTO has re-elected David Roberts, CEO of Cap Yarns, as Chairman and David Poston, President of Palmetto Synthetics, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its four councils. NCTO is comprised of four councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.*

“This is a critical juncture for our industry, which answered the call of the nation to produce lifesaving personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic,” said NCTO President and CEO Kim. “We will continue to engage with all stakeholders to press for policies that support the industry overall, help onshore PPE production and create a permanent domestic supply chain.”

 

*See attached document for more information.

10.11.2020

Kornit Digital: Calvi implemented the Kornit Avalanche HD6 system

Kornit Digital announced Vizela, Portugal-based Calvi has implemented the Kornit Avalanche HD6 system for efficient, retail-quality digital decoration on demand.

Founded in 1977, Calvi is a textile manufacturing company that works with national and international partners to deliver sportswear and casual apparel for men, women, and children. Now occupying a 6,600-square-meter facility and employing a team of more than 120 qualified professionals, they are committed to the evolution of textiles with regard to three fundamental values: quality, availability, and efficiency. In addition to their own e-commerce operation, Calvi produces about 100,000 t-shirts per week for brands like Pull & Bear, Zara, and Bershka.

“When we first contacted Kornit, it was very easy to create the partnership we have now,” says Anselmo Pereira, Head of Design at Calvi. “Kornit Avalanche really helped us to move faster, to be more ecological—we basically don’t have minimum quantities to produce.

Kornit Digital announced Vizela, Portugal-based Calvi has implemented the Kornit Avalanche HD6 system for efficient, retail-quality digital decoration on demand.

Founded in 1977, Calvi is a textile manufacturing company that works with national and international partners to deliver sportswear and casual apparel for men, women, and children. Now occupying a 6,600-square-meter facility and employing a team of more than 120 qualified professionals, they are committed to the evolution of textiles with regard to three fundamental values: quality, availability, and efficiency. In addition to their own e-commerce operation, Calvi produces about 100,000 t-shirts per week for brands like Pull & Bear, Zara, and Bershka.

“When we first contacted Kornit, it was very easy to create the partnership we have now,” says Anselmo Pereira, Head of Design at Calvi. “Kornit Avalanche really helped us to move faster, to be more ecological—we basically don’t have minimum quantities to produce.

“This company started with my grandfather, and then my father started running the business by himself,” says Catarina Lopes, Founder and CEO of the brand’s eco-conscious NÜWA division. “I started NÜWA, which has two pillars: Everything is sustainable, and we are inspired by people. We are sustainable; we don’t have to create more water waste or use more resources. Our products are made from recycled cotton, recycled polyester, and organic cotton. We only use digital printing because it’s water inks; we don’t have to use chemicals in our products.”

Source:

pr4u / Kornit

Acafintex looks to a bright future with new Monforts technology (c) AWOL Media
Acafintex father and son ownership team Don Francisco and Lic Francisco Moyano at the new Monforts installation.
14.09.2020

Acafintex looks to a bright future with new Monforts technology

At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

However, the position of Mexico in the US import market has become more stable following the signing of the United States-Mexico-Canada Agreement (USMCA), which came into force in July this year. The country has also been a key beneficiary of the current trade war that is raging between China and the USA.

In addition, there is scope for higher sales in Mexico’s domestic market. The country has a population of 129 million people who are becoming increasingly prosperous, with a large proportion of younger people who are spending more on clothing.

Flexible operation

Founded in 1986, family-owned Acafintex operates as a commission dyehouse, finishing both knitted and woven fabrics for local companies in Mexico, in widths of between 100cm to 3.6 metres. The company is run by father and son team Don Francisco and Lic Francisco Moyano.

“We have very flexible operations for fabric finishing and also produce and sell our own fabrics for both the fashion industry and for the uniforms market,” says Don Francisco. “These days, we are increasingly finishing materials for technical textiles and for the automotive industry too. We have both local and international suppliers of both yarns and base fabrics and make sure we choose the best and most reliable sources. Exports now account for over 40% of our sales.”

European contract

With a  width of 3.8 metres, the new Monforts Montex line at Acafintex is equipped with no less than 12 double TwinAir drying chambers to meet the requirements of specific technical textiles to a European customer, in a contract secured following the company’s ISO 9001 certification in 2019. The line is equipped with an integrated heat recovery system and also benefits from an exhaust air cleaning system to ensure the most resource-efficient processing available on the market.

On the Monforts TwinAir system, the airflows above and below the fabric being dried can be regulated completely independently of each other, with Optiscan Auto-Balance fully controlling the distance between the fabric and the dryer nozzles via variable-frequency fan motors and CCD chip evaluation. As a result, the evaporation rate of the stenter and its energy utilisation are always fully optimised. Contact-free drying eliminates the possibility of fabric marking or stitch draft.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily, and thousands of article specific settings and formulations to be called up at any time – with 100% reproducible results.

In combination with an existing Montex stenter, the new line has expanded finishing capacity at Acafintex to an annual 20 million linear metres.

Modifications

“From the installation to the start-up, we were supported by a team of Monforts technicians and local representative Arnulf Thaler at Sattex here in Mexico,” says Lic Francisco. “Of course, every installation has its challenges and with such big machines we needed to modify several things inside the factory and also required certain modifications from Monforts which were all carried out successfully.”  

Forced, like much of the textile industry globally, to temporarily suspend operations at the height of the Covid-19 pandemic, Acafintex is now back to full production, having installed the necessary safety measures for its employees, and is anticipating a bright future.

“We are passionate about developing new materials in search of mutual benefit for both our clients and suppliers, as well as our own workforce and the environment,” Don Francisco Moyano concludes. “Investment in the latest technology like this new Monforts line plays a key role in helping us achieve our long-term goals.”

03.09.2019

Textile trade fair Apparel Textile Sourcing Germany (ATSG) in Berlin

Keynote by Wilson Zhu (COO at Li & Fung) on digitizing global supply chains and interview with Jason Prescott (CEO JP Communications) on ATSG's concept, goals and program

From 11 to 13 September, the textile trade fair Apparel Textile Sourcing Germany (ATSG) will take place for the first time in Berlin. 200 manufacturers from all over the world will present the latest developments and trends in the global apparel and textile market. Manufacturers for the mass market as well as producers supplying brands or retailers with smaller retail ranges will present themselves. A large number of
international experts from the textile industry will be giving lectures and discussing the future of the market. Admission is free.

Keynote by Wilson Zhu (COO at Li & Fung) on digitizing global supply chains and interview with Jason Prescott (CEO JP Communications) on ATSG's concept, goals and program

From 11 to 13 September, the textile trade fair Apparel Textile Sourcing Germany (ATSG) will take place for the first time in Berlin. 200 manufacturers from all over the world will present the latest developments and trends in the global apparel and textile market. Manufacturers for the mass market as well as producers supplying brands or retailers with smaller retail ranges will present themselves. A large number of
international experts from the textile industry will be giving lectures and discussing the future of the market. Admission is free.

The ATSG is organized by JP Communications Inc. (JPC). With trade fairs under the umbrella brand ATS (Apparel Textile Sourcing), the company is already a well-known player in the North American textile and clothing industry. JP Communications operates the most extensive network of B2B sourcing platforms in the USA. TopTenWholesale.com and Manufacturer.com are used by millions of international members to find suitable wholesalers and manufacturers. The ATSG is supported by a large number of local and European organisations from industry, trade and commerce as well as international consulates.

More information:
Apparel Textile Sourcing
Source:

TEMA Technologie Marketing AG