From the Sector

Reset
41 results
Oerlikon Barmag systems convince with product diversity (c) Oerlikon
From super-low-shrinkage (SLS) through to high-tenacity (HT): depending on the configuration, Oerlikon Barmag systems are suitable for manufacturing industrial yarns with the most diverse properties.
25.06.2020

Oerlikon Barmag systems convince with product diversity

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

  • Industrial yarn: Capacity expansion in the high-end sector

Remscheid – the Chinese industrial yarn manufacturer Zhejiang Kingsway High-Tech Fiber Co., Ltd. is expanding its production capacities by a further 40,000 tons per annum with 5 Oerlikon Barmag lines. Kingsway is already successfully manufacturing special high-quality yarns, exclusively deploying Oerlikon Barmag industrial yarn systems.

The 21 new spinning positions will be used to manufacture a broad product range: in addition to super-low-shrinkage (SLS) and high-tenacity (HT) yarn, the business also plans to produce automotive yarns for seat belts and airbags. This flexibility is made possible as a result of the Oerlikon Barmag systems’ configuration. The new systems are expected to commence manufacturing next year.

Industrial yarns for greater safety

As a quality-conscious industrial yarn producer, Kingsway has been manufacturing its sophisticated, high-end yarns on Oerlikon Barmag filament yarn systems since 2015. Alex Yang Yu Long, CEO of Kingsway, is proud of relying on engineering artistry from Remscheid: “As expected, the yarns are first-class in terms of quality. Our products are used in safety equipment, sometimes in situations where lives depend on them. Therefore, there can be no compromises. To this end, we select our partners with the utmost care."

More information:
Oerlikon yarn industrial yarns
Source:

Oerlikon Manmade Fibers

18.06.2020

Oerlikon: Commissioning of polycondensation system rounds off total industrial yarn solution

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

This successfully concludes the first phase of this major project. Oerlikon Barmag Huitong Engineering installed the polycondensation system, which has a capacity of 600 tons a day, at Jiangsu Solead New Material Group Co. Ltd. in the Chinese Jiangsu Province. This will be connected to an Oerlikon Barmag industrial yarn spinning system with a 350-ton-a-day capacity. The new systems will be deployed to produce predominantly high-tenacity (HT) yarns for use in agricultural, infrastructure, transport, security and outdoor applications. These systems can be used to manufacture yarns with up to 3 x 6,600 dtex of high yarn quality with simultaneously high production efficiency. Furthermore, low-shrinkage yarns for coating textiles and so-called LDI yarns (high-tenacity, low-denier industrial yarns) for industrial sewing yarns, among other things, are also manufactured.

Source:

Oerlikon

Logo oerlikon
Oerlikon blickt positiv in die Zukunft
23.04.2020

Oerlikon Manmade Fibers segment looking positively towards the future during the coronavirus pandemic

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

Source:

Marketing, Corporate Communications
& Public Affairs

Oerlikon Logo
Oerlikon Logo
16.04.2020

myOerlikon.com : service portal and e-commerce platform in one

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.


Real security during virtual shopping
At the same time, users can access the myOerlikon.com e-commerce platform, which operates in parallel.
Customers can not only place orders here, they can also send online inquiries to Oerlikon, view prices and warehouse stocks and track inquiries,
quotations and orders already made or placed, among many other things. As a result of online access to original parts catalogs for the respective customer machines and systems, erroneous orders can be avoided.
Log-in is secure for users, as are all transactions carried out using the platform. With this, Oerlikon is implementing real security for all virtual purchases. All data exchanged is fundamentally
encrypted and hence protected against unauthorized access.

 

Source:

Marketing, Corporate Communications & Public Affairs

Oerlikon Barmag
Oerlikon Barmag mit neuer Technologie
09.04.2020

e-save: new technology helps to save energy

POY process now even more energy-efficient

Following several years of development with partner Siemens, Oerlikon Barmag kicked off serial production of its new drive unit for POY systems at the beginning of the year. The new component makes stands out above all with regards to energy efficiency.

The requirements-specific design of the compact inverter unit ensures functional optimization of the winder’s control functions. And the new component is used in conjunction with a performance-optimized chuck motor. This means that energy savings of up to 3% can be achieved for the take-up.

Further customer benefits include a significant reduction in cables and cable trays. The reduced number of switching cabinets also saves space. Following intensive field tests at two well-known customers last year, the compact inverter unit was finally released for serial manufacture at the beginning of 2020.
There are plans to deliver several thousand positions with the new component this year.

POY process now even more energy-efficient

Following several years of development with partner Siemens, Oerlikon Barmag kicked off serial production of its new drive unit for POY systems at the beginning of the year. The new component makes stands out above all with regards to energy efficiency.

The requirements-specific design of the compact inverter unit ensures functional optimization of the winder’s control functions. And the new component is used in conjunction with a performance-optimized chuck motor. This means that energy savings of up to 3% can be achieved for the take-up.

Further customer benefits include a significant reduction in cables and cable trays. The reduced number of switching cabinets also saves space. Following intensive field tests at two well-known customers last year, the compact inverter unit was finally released for serial manufacture at the beginning of 2020.
There are plans to deliver several thousand positions with the new component this year.

Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon logo (c) Oerlikon
Oerlikon logo
17.03.2020

Oerlikon wins three large manmade fibers orders in China

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

Long-term project business in China remains stable 

Oerlikon has received new large orders for manmade fibers production solutions from three of the world’s leading manmade fibers manufacturers. All three companies are based in China and have been key customers of Oerlikon for many years. The orders are for Oerlikon Barmag’s world-leading filament-spinning technology for the highly efficient production of polyester fibers. The three projects have a total value of more than CHF 600 million (EUR 565 million). A very small proportion of these projects will be recognized in Oerlikon Group’s order intake in 2020, and the majority will be accounted for in 2021 and 2022. On-site delivery and installation of these systems are planned for the period from 2021 to early 2023.

The systems business in China remains largely unchanged despite the short-term interruption caused by the coronavirus epidemic following the Chinese New Year celebrations. Long-term project planning for major customers in the manmade fibers industry has resulted in new major orders being placed with Oerlikon Barmag. One of the three new orders, valued at more than CHF300million (EUR282million), is the largest order ever received by Oerlikon Barmag, based in Remscheid, Germany.

The comprehensive manmade fibers technology solutions by Oerlikon are used along the entire value chain in polyester yarn manufacturing and contain cutting-edge automation and digitalization technologies. Oerlikon’s innovative technologies will enable the three Chinese companies to increase their production capacities for polyester yarn and to remain competitive. Oerlikon Barmag will provide the entire system for WINGS POY and WINGS FDY, as well as the texturing machines from the eFK product family in phases over a period of slightly over two years.


 

Source:

Oerlikon

perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag (c) Oerlikkon
perPETual und Polygenta produzieren rPET FDY auf WINGS von Oerlikon Barmag
12.03.2020

perPETual and Polygenta manufacture using Oerlikon's WINGS

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

More information:
Oerlikon
Source:

Oerlikon

Oerlikon: Automatisiertes Schaben reduziert Fadenbrüche (c) Oerlikon
Oerlikon: Automatisiertes Schaben reduziert Fadenbrüche
05.03.2020

Oerlikon: Automated wiping reduces yarn breaks

Following its installation at several major yarn manufacturers in China, the first wiping robot has now been operating in India since the end of 2019. As already the case with our Chinese clients, the performance of the Oerlikon Barmag solution there demonstrates the same properties: an even, high-quality wiping process providing considerably reduced yarn break rates and higher full package rates. Regular wiping (cleaning) of the spin packs is important for process stability and yarn quality.

Following its installation at several major yarn manufacturers in China, the first wiping robot has now been operating in India since the end of 2019. As already the case with our Chinese clients, the performance of the Oerlikon Barmag solution there demonstrates the same properties: an even, high-quality wiping process providing considerably reduced yarn break rates and higher full package rates. Regular wiping (cleaning) of the spin packs is important for process stability and yarn quality.

The performance data at the Indian yarn manufacturer was collated and evaluated over a period of three months. The results revealed that the yarn break rate has – regardless of the product – fallen by almost 30%. The former running time breaks have decreased by 10% and string-up breaks by 40%. Consequently, full package rates have risen by 3%, while waste rates have fallen by 0.2%. “Yarn breaks are always an issue; they have a direct impact on the production figures. This is where the wiping robot reveals its added value”, comments Stephan Faulstich, Technology Manager POY. The system automatically and autonomously controls the individual positions in accordance with the scheduled wiping cycles. In addition to the scheduled wiping processes, there are also events that cannot be planned or that are not immediately visible. Here, the wiping robot – as a result of its management functionalities – is able to identify issues such as yarn breaks or parallel wiping processes and to independently offer solutions. The same also applies to manual requests: if another action is simultaneously required here, the system identifies this and offers solutions.

The wiping robot operates in a cross-line manner. In contrast to manual wiping, the cleaning quality remains constant around the clock, considerably reducing the impact of the wiping on both the spinning plant process stability and on the yarn data of the spun yarn. And production times can be increased between two cleaning cycles as well: whereas repeated wiping is required after 48 hours in the case of manual wiping, utilizing the robot extends the interval between two wiping processes to up to 60 hours. The considerable increase in the spinning process efficiency achieved by the wiping robot also has a positive impact on margins. To this end, one customer deploying the wiping robot was able to reduce its production costs for the same yarn by more than 3%.

More information:
Oerlikon Barmag
Source:

Oerlikon

Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung. (c) Oerlikon Manmade Fibers
Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung.
27.02.2020

Oerlikon Manmade Fibers segment sets a trend with three Customer Days in India

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

And this was once again the case at the event held at the beginning of 2020, where around 450 managers and employees from local businesses took the opportunity to exchange ideas and information. For the third time in succession, Oerlikon also entered into dialog with the next generation of managers at major Indian polyester and nylon manufacturers in a separate event hosted in Mumbai beforehand. The technology symposium was again held – for the very first time – just a few days later and in a slightly modified form at a second venue: in Kolkata in West Bengal, a potential second future key location for manufacturing manmade fibers in India according to plans revealed by the Indian government. Here, the discussions held by the Oerlikon experts focused above all on the transfer of technologies for manufacturing polyester, nylon and polypropylene. Oerlikon is able to offer the entire process chain – from the melt to the textured yarn or the fibers and including the necessary semi- and fullyautomated logistics process – from a single source. This is of interest above all for potential new customers and investors in West Bengal and neighboring Bangladesh, as some do not have decades of expertise in manufacturing manmade fibers, as is the case for most companies in the region around Silvassa/Daman.

 

Source:

Oerlikon Manmade Fibers

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

(c) Oerlikon
16.01.2020

Domotex 2020: Manmade Fibers shows BCF S8 with new CPC-T

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Polyester, recycling polyester and fine titers are on trend
During numerous conversations with customers, Martin Rademacher, Head of Sales Oerlikon Neumag, observed a noticeable trend for polyester in the carpet industry even outside the USA. Sustainable solutions are equally sought after: “Our customers increasingly demand plants that can process recycled polyester,” explains Martin Rademacher.

The Manmade Fibers segment presented an additional solution by Oerlikon Barmag for polyester applications that need fine single filament titers from 0.5 dpf and high filament counts: Puffy, soft polyester filament yarns with BCF-similiar properties are produced on the basis of a POY and texturing process. Core components of the processes are the POY take-up unit WINGS HD as well as the new texturing machine eAFK Big-V.

(c) Oerlikon
Oerlikon zeigte Weltpremieren in China
26.11.2019

Oerlikon showed world premieres in China

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Oerlikon has invited all visitors to this year's Shanghaitex in China on a journey into the future of manmade fiber production. From 25 to 28 November 2019, the world market leader showed all its guests its vision of a sustainable and automated manmade fiber production at its 100 m² stand in Hall E1, D20: "Clean Technology. Smart Factory." was the motto of the future. And this was only a stone's throw away from reality at the stand. Because today Oerlikon was presenting the four ITMA Barcelona world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

Launched to create new standards in texturing: the eAFK Evo generation of machines promises superior speeds, greater productivity and consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. Oerlikon Barmag showed these wideranging capabilities at the trade fair with a high-end design from the new system platform. In particular, the numerous value-added features include two that are excelling with cool technology: the optimized EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

Source:

Oerlikon Textile GmbH & Co. KG

(c) Oerlikon
12.11.2019

Oerlikon: New upgrade transforms the ACW into WINGS

Recently, upgrades and retrofits were made available for Oerlikon Barmag ACW-series winders, with which the benefits of the WINGS concept become tangibly close for operators of POY spinning systems equipped with ACW technology. Worldwide, thousands of winders could take advantage of this system upgrade.

In addition to savings in terms of energy, waste and HR, the benefits of the WINGS concept above all include the consistently high yarn quality, making WINGS yarn a winner in further processing. Particularly with regards to its dyeing properties, the yarn is considerably superior to products manufactured using conventional winder technology.

Recently, upgrades and retrofits were made available for Oerlikon Barmag ACW-series winders, with which the benefits of the WINGS concept become tangibly close for operators of POY spinning systems equipped with ACW technology. Worldwide, thousands of winders could take advantage of this system upgrade.

In addition to savings in terms of energy, waste and HR, the benefits of the WINGS concept above all include the consistently high yarn quality, making WINGS yarn a winner in further processing. Particularly with regards to its dyeing properties, the yarn is considerably superior to products manufactured using conventional winder technology.

Yarn producers can now also achieve these typical WINGS properties with ACW winders – with a corresponding system upgrade. The ACW WINGS conversion components and ACW upgrades for draw units can be installed as plug-in units in virtually no time at all, hence minimizing system downtimes. Analog to WINGS, the new ACW WINGS draw unit is more compact and also guides the yarn using rollers instead of yarn guides. This minimizes friction for the yarn and the angles of deflection remain the same, which in turn optimizes the yarn tension on all packages.

Already being used in China
The first expansion phase with 96 positions is already successfully operating at Chinese polyester yarn manufacturer Zhejiang Rongsheng. “We achieved excellent yarn values after just four days. The yarns are of AA quality for a full package rate of 98% and a yarn break rate of 0.5 per ton”, summarizes Xu Yongming, Plant Manager at Rongsheng, talking about the upgrade package. “This has allowed us to once again become one of the top manufacturers with our ACW yarns.” A second expansion phase with 88 further positions will follow at the end of 2019.

The conversion package is also particularly interesting as a result of its fast ROI (return-on-investment) of less than one year. ACW WINGS is available for all ACW-type POY / HOY winders for polyester, polyamide 6 and polyamide 6.6.

More information:
Oerlikon Barmag
Source:

Oerlikon

Oerlikon (c) Oerlikon
15.08.2019

Oerlikon: Further EvoQuench PA POY systems destined for China

Oerlikon Barmag recently signed contracts for two orders with a total of 120 spinning positions for manufacturing polyamide POY yarn with Chinese yarn manufacturers. What makes this so special is the fact that all positions will be equipped with the EvoQuench radial quenching system for polyamide.

With this, two well-known yarn manufacturers are now committing to the EvoQuench concept to produce polyamide yarn, equipping themselves for the efficient manufacture of microfiber yarns in the process. The benefits of radial quenching vis-à-vis conventional cross-flow quenching when manufacturing microfibers are well-known from polyester processing: manufacturing outstanding quality in a more production-reliable manner, i.e. with fewer yarn breaks, is a convincing argument and makes producing polyamide microfibers considerably more efficient. “Used to create fabrics, the materials feel very pleasant to the touch”, comments Stephan Faulstich, Head of Development POY Process at Oerlikon Barmag, who has held the results of the currently sole operator of such a system in his hands. “I can imagine this will be used above all in the manufacture of sports apparel and underwear.”

Oerlikon Barmag recently signed contracts for two orders with a total of 120 spinning positions for manufacturing polyamide POY yarn with Chinese yarn manufacturers. What makes this so special is the fact that all positions will be equipped with the EvoQuench radial quenching system for polyamide.

With this, two well-known yarn manufacturers are now committing to the EvoQuench concept to produce polyamide yarn, equipping themselves for the efficient manufacture of microfiber yarns in the process. The benefits of radial quenching vis-à-vis conventional cross-flow quenching when manufacturing microfibers are well-known from polyester processing: manufacturing outstanding quality in a more production-reliable manner, i.e. with fewer yarn breaks, is a convincing argument and makes producing polyamide microfibers considerably more efficient. “Used to create fabrics, the materials feel very pleasant to the touch”, comments Stephan Faulstich, Head of Development POY Process at Oerlikon Barmag, who has held the results of the currently sole operator of such a system in his hands. “I can imagine this will be used above all in the manufacture of sports apparel and underwear.”

More information:
Oerlikon Polyamidfaser
Source:

Oerlikon

Oerlikon feiert vier Weltpremieren zur ITMA Barcelona 2019 (c) Oerlikon
Oerlikon Shuttle ITMA 2019
08.05.2019

Oerlikon celebrates four world premieres at ITMA Barcelona 2019

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

More information:
ITMA Oerlikon Fibers Automation
Source:

Oerlikon

(c) Oerlikon
18.04.2019

The materials that the future is made of ...

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

At home, at work, on the street, in the sky, on the water, even in space, technical textiles and nonwovens are swinging towards ever higher performances in amazing applications. Versatile and light, but sometimes stronger than metal, these materials of the future gain their superpowers from the interaction of precisely coordinated textile systems. At Techtextil in Frankfurt am Main from May 14 to 17, 2019 in Hall 3, B06, Oerlikon will be showing chemical fiber applications made of polyester, polypropylene and Co. and what they can do in these fields. However, these exhibits are only a communicative means to an end, as Oerlikon is primarily interested in placing the associated machinery and plant solutions at the centre of discussions with trade fair visitors.

More than two thirds of all technical innovations are directly or indirectly based on new materials, says the German Research Ministry. One could add: The key to a more advanced world, for technological products with amazing functions, breathtaking performance and greater environmental benefits, is also to improve the properties and processing of materials. This applies first and foremost to textiles. Probably no other fabric is so strong as a "team player" who draws its strength from its cohesion. A single polyester thread, for example, looks inconspicuous. Processed into a thigh-thick special weave, however, high-strength High Modulus/High Tenacity fibers anchor floating oil platforms in the deepest waters. These kilometer-long "Mooring Ropes" withstand a breaking load of well over 1,000 tons and perform their task better than steel. For decades, Oerlikon Barmag has been offering special solutions for the production of so-called industrial yarns (IDY) that are tailored to customers worldwide. "We will once again be presenting numerous innovations at this trade fair to inspire our customers," explains Dr.-Ing. Dipl.-Chem. Roy Dolmans, Technology Manager IDY and R&D Filament Processing.

Source:

Oerlikon

(c) Oerlikon
Jianjun Yang General Manager - Georg Stausberg CEO Oerlikon Manmade Fibers
18.10.2018

Recognized research work in texturing at the Suzhou site

Suzhou, China, October 18, 2018 – The years of intensive research and development in the field of texturing, which Oerlikon Barmag is doing at the site in China, bears further fruits. On October 12, 2018, the new R&D-Center was officially inaugurated at the Suzhou site. Around 80 invited guests took part in the inauguration ceremony. The ceremonial opening was done by the government representatives of the city of Suzhou and the top management level of Oerlikon Manmade Fibers Segment.

The award is a tribute to the research and development work done so far in the field of texturing machines. For example, Oerlikon holds 34 patents granted, several more are currently in the grant stage. The award also reflects the reorientation in the area of texturing. Meanwhile, the international technology team has grown to a size of over 60 highly qualified employees. This supports the strong focus on innovation and research. In addition to continuous improvement measures on existing machines, various new components and machine concepts are planned which will soon be opened to the market.

Suzhou, China, October 18, 2018 – The years of intensive research and development in the field of texturing, which Oerlikon Barmag is doing at the site in China, bears further fruits. On October 12, 2018, the new R&D-Center was officially inaugurated at the Suzhou site. Around 80 invited guests took part in the inauguration ceremony. The ceremonial opening was done by the government representatives of the city of Suzhou and the top management level of Oerlikon Manmade Fibers Segment.

The award is a tribute to the research and development work done so far in the field of texturing machines. For example, Oerlikon holds 34 patents granted, several more are currently in the grant stage. The award also reflects the reorientation in the area of texturing. Meanwhile, the international technology team has grown to a size of over 60 highly qualified employees. This supports the strong focus on innovation and research. In addition to continuous improvement measures on existing machines, various new components and machine concepts are planned which will soon be opened to the market.

Innovation is indispensable especially in the field of texturing machines, since the technology has hardly changed in the last few decades. “Only with new approaches we can offer our customers the technological advantage with which they can be successful. The focus of the innovations is on the topics of automation, digitalization, energy saving and the improvement of process quality”, said Georg Stausberg, CEO Oerlikon Manmade Fibers Segment.

In addition to the official recognition of the achievements, Oerlikon China Technology Ltd. is also provided with state funding. “This financial support is partly invested in the most modern equipment, but also in a highly qualified training of our employees. This ensures that we can continue to offer high quality and customer benefits”, said Joachim Diezl, General Manager of the site in Suzhou.

More information:
Oerlikon
Source:

Oerlikon

Oerlikon: AC-Automation Acquisition (c) Oerlikon
Georg Stausberg, CEO of Oerlikon Manmade Fibers Segment, Rolf Gänz, Managing Director of AC-Automation, and Ralf Schilken, CFO of Oerlikon Manmade Fibers Segment (from left, first row).
13.04.2018

Oerlikon: AC-Automation Acquisition

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

The 60 employees at AC-Automation’s Bernkastel-Kues and Augsburg locations will become part of Oerlikon’s Manmade Fibers Segment, which includes the leading brands Oerlikon Barmag and Oerlikon Neumag. The move will expand the Segment’s business model, adding another key core component to its current offering of production plants and technology solutions from melt to yarn, fibers, andnonwovens. Ultimately, Oerlikon will be able to offer customers a total solution from a single source, including automation logistics for packaging, high-bay storage, and other areas, which complement its current market-leading spinning and process technologies for the textile industry.

"We see our expanded overall offering as an Industry solution, reflecting the future of an even more efficient, digitized and profitable chemical fiber industry, especially for large-scale plants with daily production capacity of several hundred tons of polyester, nylon, polypropylene, or other manmade fibers,” explains Georg Stausberg, CEO of the Manmade Fibers Segment. Manmade fiber producers from China — the world’s most important market, generating more than 70 % of worldwide manmade fiber production — as well as companies from other fast-growing markets such as India, Turkey and the USA are also relying on automated and networked Industry total solutions.

"The acquisition and integration of AC-Automation’s automation solutions will provide new opportunities for our manmade fiber business. It enables the Segment to increasingly position itself as an Industry solution provider in combination with our own digitization solutions,” says Oerlikon Group CEO Dr. Roland Fischer. “As a leading provider of advanced materials, surface solutions and materials processing including the engineering and production of polymer plants, this acquisition marks another milestone in Oerlikon’s strategy to strengthen its businesses and thus sustain profitable growth.”

"After such a long partnership, we are excited to be able to benefit even more in the future as part of a global player in the textile industry. Our market access will further improve with the help of the Oerlikon
Group's sales and service network. For my employees, I am very pleased to be able to bring them into an international Group, in which there would be new opportunities and perspectives for them personally,”
said Rolf Gänz, AC-Automation’s Managing Director.

More information:
Oerlikon Automation
Source:

Oerlikon - Corporate Communications
and Public Affairs (Segment Manmade Fibers)

Fasspumpe mit Zuförderschnecke Oerlikon Textile GmbH & Co. KG
Fasspumpe mit Zuförderschnecke
16.08.2017

Höchste Präzision für hochviskose Medien

Ob kleben, vergießen oder dämmen, dichten und schäumen - auf der diesjährigen Bondexpo, der internationalen Fachmesse für Klebtechnologie informiert Oerlikon Barmag über sein Zahnraddosierpumpenprogramm speziell für die Arbeitsschritte Fügen/Verbinden. Vom 9. bis zum 12. Oktober präsentiert das Unternehmen in Halle 6 unter anderem Komponenten für die Silikonverarbeitung sowie Heißschmelzkleberanwendungen, aber auch für die Verarbeitung von Harzen oder Polyurethanen und anderen höherviskosen Flüssigkeiten (Standnr. 6422).

Effizienz in der Bewältigung zähflüssiger Medien – die GA-Baureihe

Ob kleben, vergießen oder dämmen, dichten und schäumen - auf der diesjährigen Bondexpo, der internationalen Fachmesse für Klebtechnologie informiert Oerlikon Barmag über sein Zahnraddosierpumpenprogramm speziell für die Arbeitsschritte Fügen/Verbinden. Vom 9. bis zum 12. Oktober präsentiert das Unternehmen in Halle 6 unter anderem Komponenten für die Silikonverarbeitung sowie Heißschmelzkleberanwendungen, aber auch für die Verarbeitung von Harzen oder Polyurethanen und anderen höherviskosen Flüssigkeiten (Standnr. 6422).

Effizienz in der Bewältigung zähflüssiger Medien – die GA-Baureihe
Beim Auftrag von Heißschmelzklebern steht vor allem die Gleichmäßigkeit des Auftrags im Vordergrund. Exaktes Dosieren setzt aber nicht nur das schnelle und reproduzierbare Einstellen eines Betriebspunktes voraus, sondern auch eine pulsationsarme Einspeisung des Fördermediums. In Ergänzung zur bewährten GM-Baureihe hat Oerlikon Barmag nun die GA-Serie zur Förderung höherviskoser Medien entwickelt. Die GA-Baureihe ist in Fördervolumina von 1,25 – 30 cm³/U (0,6-144 l/h) lieferbar. Sie ist ausgelegt für Drücke bis 200 bar, für Viskositäten bis 1.500 Pas sowie für Temperaturen bis maximal 225°C. Mit der neuen Pumpenbaureihe bietet Oerlikon Barmag überall dort maßgeschneiderte Lösungen, wo auf eine genau definierte, gleichmäßige Dosierung Wert gelegt wird.

Austrag und Dosieren aus einer Hand – die Fasspumpe
Die Fasspumpe ist speziell zur Förderung und Dosierung hochviskoser Materialien wie Klebstoffe, Silikone etc. aus Fässern und anderen großen Gebinden und für Drücke bis zu 250 bar ausgelegt. Thorsten Wagener, verantwortlicher Sales Mitarbeiter für Pumpen in industriellen und chemischen Anwendungen: "Die Fasspumpe trägt nicht nur hochviskose Materialien aus dem Fass aus, sondern dosiert das Medium ohne einen weiteren Zwischenstopp mit dem gewohnt hohen volumetrischen Wirkungsgrad zum Mischkopf.“ In enger Abstimmung mit dem Kunden werden Zahnradpumpe und Fassfolgeplatte so aufeinander abgestimmt, dass die Platte mühelos den Boden des Behälters erreichen kann und so nur eine sehr geringe Restmenge von < 1% zurücklässt, was sich positiv sowohl auf die Materialkosten als auch auf den Produktionsablauf auswirkt.

Unter Hochdruck arbeiten
In der Hochdrucktechnologie stellt die Förderung von kleinen Durchsätzen mit niedrigen Viskositäten eine besondere Herausforderung dar. Speziell für diesen Einsatz hat Oerlikon Barmag die GM-Baureihe mit rundem Plattenpaket um eine Option hinsichtlich Druckaufbauvermögen erweitert. Diese mehrstufige Pumpe ist in den Fördergrößen 0,05 bis 20 ccm/U lieferbar und gewährleistet den Aufbau hoher Betriebsdrücke selbst bei niedrigen Viskositäten (z.B. 250 bar, 100 mPas). So lassen sich höhere volumetrische Wirkungsgrade bzw. ein größerer nutzbarer Drehzahlbereich erzielen. Die robuste Zahnraddosierpumpe sorgt für einen pulsationsarmen kontinuierlichen Betrieb. Somit können erstmalig auch Anwendungen im Hochdruckbereich abgedeckt werden, die minimale Durchflussraten (z.B. 0,5g-1,5g/sec.) fordern. Für die Hersteller von PUR-Formteilen, Blockschaum, Kühlmöbelisolationen oder Sandwichpanels bedeutet das konstante Prozessstabilität bei geringeren Investitionskosten.
 
Eine für alle – High-Speed Dosieren leicht gemacht
Die neue High-Speed-Dosierpumpe ist speziell für schlecht schmierende und abrasive Medien entwickelt worden. Mit ihrem vergrößerten Drehzahlbereich (30 – 500 U/min) deckt sie einen großen Austragsbereich ab, für den bisher mehrere Pumpen unterschiedlicher Größen eingesetzt werden mussten. Für den Produzenten bedeutet das geringeren Aufwand bei Produktionsumstellungen und weniger Ersatzteilhaltung. Die kompakte Bauweise der Pumpe (ø65mm) verringert den Platzbedarf in der Maschine und das geringe Gewicht (1,4 kg) hält die Belastung so niedrig wie möglich, was sich wiederum positiv auf die Bauweise der Maschine auswirkt. Die lebensdauergeschmierten außenliegenden Kugellager sorgen bei der Pumpe nicht nur für eine lange Lebensdauer, sondern werden auch nicht vom jeweiligen Produkt berührt.

Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon presents take up winder Source: www.ita.rwth-aachen.de
Oerlikon presents take up winder
30.05.2017

Oerlikon presents new take-up winder to ITA as partial gift

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.

In May 2017, Jochen Adler, Vice-President and Chief Technology Officer at Oerlikon Textile GmbH & Co. KG, presented a Oerlikon Barmag take-up winder as a partial gift to Prof. Dr Thomas Gries, head of the Institut für Textiltechnik (ITA) at RWTH Aachen University. The new Type ASW602 winder, which is equipped with modern control software and user interface, replaces the former institute’s Barmag take-up winder.


Due to this modernisation, ITA has access to a latest generation take-up winder which is used for various research projects. The new winder is applied at ITA’s two pilot melt spinning plants and ensures the transfer of new research and development insights into the pilot scale. Furthermore, this winder has two winding positions and operates with winding speeds between 2500 m/min and 5500 m/min. The new winder is suitable for all kinds of polymers, from polypropylene to polyethylene, polyester, polyamide etc. as well as for the production of several types of yarn, such as industrial yarn, pre-oriented yarn and fully-drawn yarn.
“We thank Oerlikon Barmag for the generous partial gifting and the support during the set-up of the new take-up winder”, says Prof. Dr Thomas Gries. “The new equipment will keep the institute’s machine park on a high and powerful level.” The head of ITA’s chemical fibre department Dr Thorsten Anders adds: “This winder is designed for the needs of chemical yarn research. It allows state of the art technology research and development and pilot-scale production. We will use it for the melt spinning plants in the single- and bi-component spinning process. This way, we can access a wide variety of producible yarn types.“

More information:
Oerlikon, ITA
Source:

Institut für Textiltechnik of RWTH Aachen University