From the Sector

Reset
5 results
09.09.2019

Hexcel’s HexAM™ Additive Manufacturing Approved by Boeing

Hexcel Corporation has been approved by Boeing to produce HexPEKK™-100 aerospace structures for major commercial aircraft platforms.

After rigorous review of Hexcel’s proprietary poly-ether-ketone-ketone and carbon fiber material formulation, Hexcel’s superior HexPEKK™-100 end-use components – as well as its highly-controlled HexAM™ additive manufacturing process (which uses selective laser sintering) – are now obtainable through Boeing’s Qualified Provider List (QPL). These HexPEKK™ components will be manufactured-to-print for commercial aerospace applications where complexity, weight reduction, and strong mechanical performance are critical.

Hexcel provides high-rate serial part production with reduced lead-time and at a lower cost than traditional intricately machined aluminum or composite structures. HexPEKK™-100 parts meet interior aircraft smoke and toxicity requirements and are ideal for complex components such as optimized brackets, environmental control system ducts, and castings.

Hexcel Corporation has been approved by Boeing to produce HexPEKK™-100 aerospace structures for major commercial aircraft platforms.

After rigorous review of Hexcel’s proprietary poly-ether-ketone-ketone and carbon fiber material formulation, Hexcel’s superior HexPEKK™-100 end-use components – as well as its highly-controlled HexAM™ additive manufacturing process (which uses selective laser sintering) – are now obtainable through Boeing’s Qualified Provider List (QPL). These HexPEKK™ components will be manufactured-to-print for commercial aerospace applications where complexity, weight reduction, and strong mechanical performance are critical.

Hexcel provides high-rate serial part production with reduced lead-time and at a lower cost than traditional intricately machined aluminum or composite structures. HexPEKK™-100 parts meet interior aircraft smoke and toxicity requirements and are ideal for complex components such as optimized brackets, environmental control system ducts, and castings.

More information:
Hexcel, Airbus Hexcel HexPEKK
Source:

APOCOPE Agency

12.03.2019

Hexcel and Lavoisier Composites: Alliance to Up-Cycle Composite By-Products from the Aerospace Manufacturing Cycle

Hexcel has joined forces with a Lyon-based startup, LAVOISIER COMPOSITES. This company has developed CARBONIUM®, a new generation of material sourced entirely from carbon composite by-products generated by the French aerospace sector.

Hexcel supplies high-performance composite materials for the latest generation of aircraft such as the Airbus A350 XWB (53% composite structure). This has greatly contributed to the reduction of the aircraft's weight, thereby reducing its fuel consumption and carbon footprint. Composites are a significant first step toward tackling environmental and economic challenges, and eco-sourcing of the industry by-products also plays a key role.

Hexcel has joined forces with a Lyon-based startup, LAVOISIER COMPOSITES. This company has developed CARBONIUM®, a new generation of material sourced entirely from carbon composite by-products generated by the French aerospace sector.

Hexcel supplies high-performance composite materials for the latest generation of aircraft such as the Airbus A350 XWB (53% composite structure). This has greatly contributed to the reduction of the aircraft's weight, thereby reducing its fuel consumption and carbon footprint. Composites are a significant first step toward tackling environmental and economic challenges, and eco-sourcing of the industry by-products also plays a key role.

CARBONIUM®, which was developed with a process based on three patents pending, reduces overall environmental impact by 40-50%, compared to equivalent products derived from virgin materials. Based on the "climate change" factor, the life cycle assessment carried out with Hexcel revealed that the up-cycling of by-products from the aerospace composites industry leads to a reduction in CO2 emissions of 13kg per kg of CARBONIUM® used.
In its first year of operation, LAVOISIER COMPOSITES has already enjoyed commercial success, including the launch of two top-of-the-range watch models by Swiss luxury watchmaker ULYSSE NARDIN using this new material.

From aircraft fuselages to watchmaking, the composites manufacturing cycle presents opportunities for reducing our impact on the environment.

More information:
Hexcel Hexcel, Airbus
Source:

AGENCE APOCOPE

07.02.2019

Hexcel Exhibits at Aero India 2019

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel’s high strength and intermediate modulus carbon fiber range has been augmented by the launch of HexTow® HM63, a high modulus carbon fiber that has the highest tensile strength of any existing HM fiber. HexTow® HM63 provides outstanding translation of fiber properties in a composite, including superior inter-laminar shear and compression shear strength. HexTow® HM63 is therefore ideal for any high stiffness and strength-critical applications including space, satellites, UAV, commercial aerospace and helicopters.

Source:

AGENCE APOCOPE

Airbus Helicopters unveils third H160 prototype with striking carbon livery © Hexcel Corporation
14.12.2017

Hexcel Corporation: Airbus Helicopters unveils third H160 prototype

Hexcel Corporation is proud to announce the unveiling of the third H160 prototype from Airbus Helicopters, featuring a striking carbon-inspired livery that represents the composite materials Hexcel supplies for the helicopter.

Hexcel Corporation is proud to announce the unveiling of the third H160 prototype from Airbus Helicopters, featuring a striking carbon-inspired livery that represents the composite materials Hexcel supplies for the helicopter.

This gesture follows Hexcel’s announcement in June that its reinforcements, prepregs, adhesives and honeycomb materials had been selected for the H160’s composite fuselage structures and main rotor blades. The H160 was designed by Airbus Helicopters to create added-value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure contributes to the lightweight fuel-saving design and performance optimization.
Airbus Helicopters decided to promote the H160 program and its high carbon fiber content in a way that recalls the livery previously used for the A350 XWB. The A350 XWB has a structure that is 53% composites and Hexcel supplies the carbon fiber prepreg for all of the aircraft’s composite primary structures.
The newly unveiled H160 prototype is a fitting tribute to the 40-year partnership between Hexcel and Airbus Helicopters.

Airbus Helicopter Airbus Helicopter
Airbus Helicopter
22.06.2017

Airbus Helicopters selects HEXCEL as supplier of advanced composite materials for the H160 helicopter

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

The H160 was designed by Airbus Helicopters to create added value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure (fuselage, tail boom, tail rotor and main rotor blades) contributes to the lightweight fuel-saving design and performance optimization.
“Hexcel’s composite materials have been used in Airbus Helicopters’ programs for many years and we are honored to be continuing our long term relationship, based on innovation and continuous improvement” commented Thierry Merlot, Hexcel President Aerospace EMEA-AP. “We thank Airbus Helicopters for their selection and look forward to our ongoing supply of high performance, weight saving composites materials for this innovative rotorcraft”.
H160 configurations in development include offshore transportation, business and private aviation, emergency medical services, public services, and commercial passenger transport. The helicopter is planned to enter into service in 2019.

More information:
Hexcel, Airbus
Source:

AGENCE APOCOPE