From the Sector

Reset
2 results
DOMOTEX asia/CHINAFLOOR expands its design influence (c) DOMOTEXasia
Domotex Asia Chinafloor
26.11.2019

DOMOTEX asia/CHINAFLOOR expands its design influence

DOMOTEX asia/CHINAFLOOR (March 24-26) – the leading trade show for carpets and floor coverings in the Asia Pacific region - expands the design and conference area and welcomes new and returning brands.

Shanghai - For the 22nd edition, each flooring sector will have a theme. The highlighted product category in wood is solid wood for ground heating systems. The category is taking over the entire hall showing new technologies, new designs and new products in floor heating. Solid wood for ground heating systems is growing in China – according to China National Forest Products Industry Association, around 80% of China's wood flooring brands have developed the product.

DOMOTEX asia/CHINAFLOOR (March 24-26) – the leading trade show for carpets and floor coverings in the Asia Pacific region - expands the design and conference area and welcomes new and returning brands.

Shanghai - For the 22nd edition, each flooring sector will have a theme. The highlighted product category in wood is solid wood for ground heating systems. The category is taking over the entire hall showing new technologies, new designs and new products in floor heating. Solid wood for ground heating systems is growing in China – according to China National Forest Products Industry Association, around 80% of China's wood flooring brands have developed the product.

At the same time the market share is increasing by more than 30% annually. It is expected that by 2025, the market size of solid wood for ground heating systems will reach RMB 10 billion (approx. 1.4 billion USD). The international and local market leaders, such as Junckers, Foglie d’Oro, Edelholz, IBF, Teclic, Nature, Fudeli, Bloor, Jinyi, Licher, Nuogao and Moganshan have already confirmed their participation at the show. Also in this hall we see the latest developments in the market in the dedicated InnovAction campaign.

The resilient flooring section will be spread out to 69,500 sqm gross, featuring Stone Plastic Composite (SPC) flooring. Among the resilient halls, there will be an “Inspiration Hall”, housing InnovAction campaign and design forum, where famous interior designers will educate the audience on using resilient flooring in interior. The InnovAction will be upgraded by showcasing the new products within matching interior spaces. This new way of presenting the InnovAction products is ideal for both manufacturers to share the ideas and for visitors to keep up to date with the market trends.

Carpet section will promote carpet as a driving force for interior design, with a dedicated hall being the epicenter of home and design carpets and the host hall for the Luxury Brands Carpet Show – a showcase of the most sought-after international high-end carpet design brands. After the successful first edition in 2019, Chinese Original Carpet Design Show comes back to promote the works of young Chinese carpet designers. Country pavilions from Germany, Belgium, Iran and Turkey will also showcase their products among the carpet halls. Traditionally DOMOTEX asia/CHINAFLOOR has been focused on B2B, however due to the market changes, the end users are more and more welcome to the show. In order to give the oriental carpets and rugs the spotlight and follow the trends, Indian and Afghanistan pavilions will be creating a new area - “Treasure of Orient”.

In 2020, DOMOTEX asia/CHINAFLOOR will cover more than 185,000 sqm of gross space, taking up 16 halls at the Shanghai New International Expo Center. Five of the exhibition halls will be dedicated to carpets and rugs, four to wood, bamboo and other hard floors, 2 to FLOORTECH asia and 5 halls to resilient floor coverings. In 2019, the show gathered 1,579 exhibitors from 36 countries and attracted 66,875 trade visitors, of which 15,092 international, coming from 107 nations.

Oerlikon Neumag at Domotex Asia 2018 Oerlikon Neumag’s Sytec One guaranties an economical BCF Carpet Yarn production for challenging processes.
13.02.2018

Oerlikon Neumag at Domotex Asia 2018

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

More information:
Oerlikon Neumag Domotex
Source:

Oerlikon Textile GmbH & Co. KG