From the Sector

Reset
241 results
19.07.2022

INDA: Nominations are open for Hygienix Innovation Award™

INDA, the Association of the Nonwoven Fabrics Industry, announces online nominations are now open for the prestigious Hygienix Innovation Award™. The Award recognizes a new product or technology innovation in the absorbent hygiene and personal care sector that uses nonwoven fabrics in novel, technically sophisticated, uniquely creative and expansive ways. The Award will be presented at Hygienix™ 2022, Nov. 14-17 at The Roosevelt New Orleans Hotel, in New Orleans, LA.

INDA, the Association of the Nonwoven Fabrics Industry, announces online nominations are now open for the prestigious Hygienix Innovation Award™. The Award recognizes a new product or technology innovation in the absorbent hygiene and personal care sector that uses nonwoven fabrics in novel, technically sophisticated, uniquely creative and expansive ways. The Award will be presented at Hygienix™ 2022, Nov. 14-17 at The Roosevelt New Orleans Hotel, in New Orleans, LA.

Nominees will be selected from a broad range of new products or technologies that have been commercially available at most two years prior to Hygienix™ 2022. Nominees can include end product components, fabrication techniques, or products that use a nonwoven technology in manufacturing. Award categories include feminine care products, diapers, incontinence products, raw materials, equipment technology, reusable products or technologies, and composites or laminates that use nonwovens. Three finalists will present their innovations to over 450 participants at the eighth edition of Hygienix™, the premier event for the absorbent hygiene and personal care markets. The winner will be announced Thursday, Nov. 17.

Last year’s Hygienix Innovation Award™ was presented to Kudos for their Kudos Diaper Subscription Box, a disposable diaper featuring 100 percent breathable cotton touching baby’s skin.

More information:
INDA nonwovens Hygienix Hygiene
Source:

INDA

13.07.2022

Nominations for RISE® Innovation Award Accepted until July 15

  • RISE® – Research, Innovation & Science for Engineered Fabrics Conference – Returns In-Person

Nonwovens innovators will convene in-person for RISE® – Research, Innovation & Science for Engineered Fabrics Conference – the industry’s premier conference on nonwovens science and technology, Sept. 27-28 at North Carolina State University in Raleigh.

The 12th edition of RISE returns live to Talley Student Union after being held virtually over the last two years. The event is co-organized by INDA and The Nonwovens Institute at North Carolina State University. Registration is now open at the RISE® website. https://www.riseconf.net/

Experts in product development, material science, and new technologies will come together for this insightful two-day conference focused on promising technology developments, future needs and market opportunities. Participants will have opportunities to exchange views on innovative nonwoven technologies and applications, furthering INDA’s strategic initiative to connect and convene the industry.

  • RISE® – Research, Innovation & Science for Engineered Fabrics Conference – Returns In-Person

Nonwovens innovators will convene in-person for RISE® – Research, Innovation & Science for Engineered Fabrics Conference – the industry’s premier conference on nonwovens science and technology, Sept. 27-28 at North Carolina State University in Raleigh.

The 12th edition of RISE returns live to Talley Student Union after being held virtually over the last two years. The event is co-organized by INDA and The Nonwovens Institute at North Carolina State University. Registration is now open at the RISE® website. https://www.riseconf.net/

Experts in product development, material science, and new technologies will come together for this insightful two-day conference focused on promising technology developments, future needs and market opportunities. Participants will have opportunities to exchange views on innovative nonwoven technologies and applications, furthering INDA’s strategic initiative to connect and convene the industry.

The 2022 RISE® program will focus on breaking developments in responsible sourcing of nonwoven inputs, realistic end-of-life options, and circularity opportunities in the world of nonwovens and engineered materials with thought leaders presenting on these cutting-edge topics.

Innovations that solve problems and advance the nonwovens industry will be recognized with the 2022 RISE® Innovation Award. The award will be presented Sept. 28 in the culmination of the event. Companies can self-nominate products online http://www.inda.org/awards/rise-innovation-award.html until July 15.

RISE® participants will have the special opportunity on Sept. 27, from 5:30 to 7:30 p.m., to tour The Nonwovens Institute’s $50 million-plus, 60,000 square-foot facilities featuring state-of-the-art equipment, pilot lines and analytical facilities, and attend a networking reception at the on-campus Lonnie Pool Golf Course Clubhouse. The tour will be limited to 50 attendees and advance response is required. The reception will be open to all attendees.

Speaker Snapshot

A few topics that will be addressed by visionary speakers at RISE® include:

  • North American Economic Outlook - Robert Fry, Jr., Ph.D., Principal, Robert Fry Economics LLC
  • Sustainable Fibers – Developments and the Future - David Grewell, Ph.D., Director, Center for Bioplastics and Biocomposites
  • Achieving Supply Chain Circularity - Redesigning Plastics to be Recyclable-by-Design - Kat Knauer, Ph.D., Program Manager - V Research, National Renewable Energy Laboratory (NREL)
  • Novel Biobased Resins Outperforming Plastics and Other Biodegradable Biopolymers - Steven Sherman, CEO, BioLogiQ, Inc.
  • Stereochemistry Strategies to Toughen Sugar-Based Polymers and Degradable Elastomers - Matthew Becker, Ph.D., Hugo L. Blomquist Distinguished Professor, Duke University
  • Biobased Multicomponent Structures Providing Unique Characteristics and Sustainable Properties to Nonwovens - Kristel Beckers, Senior Application Technician, Total Corbion PLA

 

More information:
INDA RISE® nonwovens
Source:

INDA, the Association of the Nonwoven Fabrics Industry

(c) INDA
06.07.2022

INDA: Highlights of the World of Wipes® International Conference

More than 450 participants from 18 countries made in-person connections and gained innovative insights into the segment’s future at the World of Wipes® (WOW) International Conference at the Marriott Marquis in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, reported strong attendance and activity at its 16th WOW conference, June 27-30. Highlights included a conference, award presentations, a separate 1.5-day WIPES Academy training course, and a new mentorship program.  

WOW speakers focused on the future of the $17 billion wipes sector amid changing consumer trends, supply chain complexities, sustainable packaging demands, and medical disinfection challenges. Program sessions included Circular and Sustainable Wipes, Supply Chain Challenges, Sustainable Substrates, Disinfection Concerns, Sustainable Packaging Trends, and Flushability Developments.

Tony Fragnito welcomed participants in his new role as INDA President for the first time since succeeding Dave Rousse, now President Emeritus and advisor.

More than 450 participants from 18 countries made in-person connections and gained innovative insights into the segment’s future at the World of Wipes® (WOW) International Conference at the Marriott Marquis in Chicago.

INDA, the Association of the Nonwoven Fabrics Industry, reported strong attendance and activity at its 16th WOW conference, June 27-30. Highlights included a conference, award presentations, a separate 1.5-day WIPES Academy training course, and a new mentorship program.  

WOW speakers focused on the future of the $17 billion wipes sector amid changing consumer trends, supply chain complexities, sustainable packaging demands, and medical disinfection challenges. Program sessions included Circular and Sustainable Wipes, Supply Chain Challenges, Sustainable Substrates, Disinfection Concerns, Sustainable Packaging Trends, and Flushability Developments.

Tony Fragnito welcomed participants in his new role as INDA President for the first time since succeeding Dave Rousse, now President Emeritus and advisor.

WOW highlights included the announcement of Nice’ N CLEAN® SecureFLUSH™ Technology Flushable Wipes from Nice-Pak as the winner of this year’s World of Wipes Innovation Award® for their flushable wipes made of 100 percent cellulose nonwoven. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to ensure responsible care of plumbing and wastewater.

Other highlights included the presentation of the 2022 INDA Lifetime Technical Award to Richard Knowlson, Principal, RPK Consulting. The award honors an individual with a long-established nonwovens career that advance technology and the commercial success of the North American nonwovens industry. Knowlson pioneered the use of powder super absorbents in airlaid forming systems creating new period product designs for ultra-thin products. He co-founded Airformed Composites, co-invented the first commercial multi-bonded airlaid products in North America that were used in characters for Sesame Street and served in leadership positions with Rayonier, Ciba/Huntsman and Jacob Holm.

07.06.2022

EPTA World Pultrusion Conference 2022 explores composites sustainability

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

The European Pultrusion Technology Association (EPTA) has published a report from its latest conference, which focuses on advances in sustainability and recycling.

More than 130 professionals from the global pultrusion community gathered at the 16th World Pultrusion Conference in Paris on 5-6 May 2022. Organised by EPTA in collaboration with the American Composites Manufacturers Association (ACMA), the event featured 25 international speakers sharing insight on market trends, developments in materials, processing and simulation technologies, and innovative pultruded applications in key markets such as building and infrastructure, transportation and wind energy.

‘Bio-pultrusion’:  
Composites based on natural fibres offer a number of benefits, including low density and high specific strength, vibration damping, and heat insulation. The German Institutes for Textile and Fiber Research Denkendorf (DITF) are developing pultrusion processes using bio-based resins and natural fibres. Projects include the BioMat Pavilion at the University of Stuttgart, a lightweight structure which combines ‘bamboo-like’ natural fibre-based pultruded profiles with a tensile membrane.

Applications for recycled carbon fibre (rCF):
The use of rCF in composite components has the potential to reduce their cost and carbon footprint. However, it is currently used to a limited extent since manufacturers are uncertain about the technical performance of available rCF products, how to process them, and the actual benefits achievable. Fraunhofer IGCV is partnering with the Institute for Textile Technology (ITA) in the MAI ÖkoCaP project to investigate the technical, ecological and economic benefits of using rCF in different industrial applications. The results will be made available in a web-based app.

Circularity and recycling:
The European Composites Industry Association (EuCIA) is drafting a circularity roadmap for the composites industry. It has collaborated with the European Cement Association (CEMBUREAU) on a position paper for the EU Commission’s Joint Research Centre (JRC) which outlines the benefits of co-processing end-of-life composites in cement manufacturing, a recycling solution that is compliant with the EU’s Waste Framework Directive and in commercial operation in Germany. Initial studies have indicated that co-processing with composites has the potential to reduce the global warming impact of cement manufacture by up to 16%. Technologies to allow recovery of fibre and/or resin from composites are in development but a better understanding of the life cycle assessment (LCA) impact of these processes is essential. EuCIA’s ‘circularity waterfall,’ a proposed priority system for composites circularity, highlights the continued need for co-processing.

Sustainability along the value chain:
Sustainability is essential for the long-term viability of businesses. Resin manufacturer AOC’s actions to improve sustainability include programmes to reduce energy, waste and greenhouse gas emissions from operations, the development of ‘greener’ and low VOC emission resins, ensuring compliance with chemicals legislation such as REACH, and involvement in EuCIA’s waste management initiatives. Its sustainable resins portfolio includes styrene-free and low-styrene formulations and products manufactured using bio-based raw materials and recycled PET.

Source:

European Pultrusion Technology Association EPTA

07.06.2022

ITMC presents date and speakers for its 8th edition

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

The ITMC 2022 conference, which will take place at the BAnQ from September 19 to 21, 2022, is aimed at attendees from various sectors of the textile industry. Its interdisciplinary approach is the key to maximizing the potential and development of textile materials and tools for various applications. The objective of the conference is to explore new ideas, effective solutions and collaborative partnerships for business growth by creating synergy between designers, manufacturers, suppliers, students and end users from all sectors and fully exploiting this potential.

The main topics are: Composites and textile reinforcement - Sustainable Production & Ecotextiles - Smart and functional textiles - Nanotechnology & Advanced Technical Textiles - Comfort & Protective Textiles - Medical Textiles - Digital Tools & Mass Customization

Keynote speakers :

  • Omar Cherkaoui, ESITH : how ESITH was able to support the operators of the Moroccan textile sector during the covid-19 crisis
  • Tracy Toulouse, TT : the impact and legacy of our clothing is to identify us as a nation
  • Prof. Raul Fangueiro, University of Minho: fiber-based materials: from nano to macro scale
  • Pierre-Alexandre Fournier, Exoskin: the role of smart textiles in the future of health
  • KyoungOk Kim, Shinshu University: Patternmaking for attractive clothing for mass customization
  • Marie O’Mahony, Consultant, Royal College of Art (RCA): smart materials & systems: has embracing uncertainty become vital to commercialization?
  • Xianyi Zeng, Ensait: intelligent garments for online monitoring of human health and well-being
  • Corinne Farace, Techtera: The collaborative approach: a major stake in meeting the challenges of tomorrow
25.05.2022

SMCCreate Conference: Programme completed

The SMCCreate Conference provides information on design with SMC and BMC composites and offers valuable insights into the entire product design process from the idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials. 15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda. The presentation language will be English.

The SMCCreate Conference provides information on design with SMC and BMC composites and offers valuable insights into the entire product design process from the idea to part manufacturing, targeted both at experienced designers and at designers that are new in applying these versatile materials. 15 lectures by international speakers from France, Germany, Italy, Spain, The Netherlands and the USA will present practical presentations about sustainability, part design, mobility and automotive applications. Equally current trends and developments in the European SMC/BMC market are on the agenda. The presentation language will be English.

The winner of the SMC BMC Design Award 2022 , Isa Buitenhuis completes the programme of the SMCCreate Design Conference 2022 from 28-29 June in Antwerp. The TU Delft student will present her winning design LightTurn in a lecture. This shower panel makes showering a completely new experience, as the shower fitting can be extended to suit the age of the user. It combines a seat, water-saving elements and even lighting in a modern design. The award is offered by the European Alliance for SMC BMC and took place during the JEC World in Paris at the beginning of May.

The SMCCreate 2022 Conference will be organized on June 28-29, 2022 in the Hilton Hotel in Antwerp (Belgium).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

18.05.2022

Hexcel at JEC World 2022

  • Hexcel Composite Innovations for Aerospace Applications on Display at JEC World 2022: Hall 5, Stand J41

In late 2021, Hexcel announced an agreement with Fairmat, a deep technology startup, to build the capability to recycle carbon fiber prepreg from Hexcel European operations for reuse in composite panels sold into commercial markets, giving a second life to recovered carbon fiber. To do so, Fairmat has developed a virtuous recycling process, and a sample of its newly recycled material will be available to view at JEC World 2022. Hexcel will present an array of product innovations for aerospace and urban air mobility customer applications during JEC World 2022 in Paris on May3-5. These latest innovations demonstrate the company’s leadership in developing advanced composites technology for the aerospace market.

  • Hexcel Composite Innovations for Aerospace Applications on Display at JEC World 2022: Hall 5, Stand J41

In late 2021, Hexcel announced an agreement with Fairmat, a deep technology startup, to build the capability to recycle carbon fiber prepreg from Hexcel European operations for reuse in composite panels sold into commercial markets, giving a second life to recovered carbon fiber. To do so, Fairmat has developed a virtuous recycling process, and a sample of its newly recycled material will be available to view at JEC World 2022. Hexcel will present an array of product innovations for aerospace and urban air mobility customer applications during JEC World 2022 in Paris on May3-5. These latest innovations demonstrate the company’s leadership in developing advanced composites technology for the aerospace market.

  • Sustainability Focus on Recycling and Reuse
  • HiTape® and HiMax® Reinforcements for OoA Processing
  • Innovative HiFlow™ Resins for Continuous and Shorter Cycle Injection Processes
  • HexPly® Prepregs for Primary Structure and Engine Applications
  • HexTow® High Modulus Fibers HM63 and HM54
  • Thermoplastics and Processing Innovations for Primary and Secondary Structures
  • Lightweight PrimeTex® Reinforcements Solutions for Urban Air Mobility (UAM)
12.05.2022

JEC World 2022 shows the dynamism of the composites industry

The global composites community reunited at JEC WORLD 2022 on May 3rd to 5th for three days of innovation, networking and knowledge sharing. The industry was excited to reconnect in Paris after three years and the show exceeded all expectations in terms of product launches, content, business activity and attendance. Overall, the event welcomed 32,000+ professional visits, in Paris and online, from more than 115 countries and featured 1,201 exhibitors and 26 pavilions, whilst the JEC World Connect platform offered an additional way to explore the show this year.

The global composites community reunited at JEC WORLD 2022 on May 3rd to 5th for three days of innovation, networking and knowledge sharing. The industry was excited to reconnect in Paris after three years and the show exceeded all expectations in terms of product launches, content, business activity and attendance. Overall, the event welcomed 32,000+ professional visits, in Paris and online, from more than 115 countries and featured 1,201 exhibitors and 26 pavilions, whilst the JEC World Connect platform offered an additional way to explore the show this year.

While fewer Asian participants were able to join the show this year due to travel complexities, the attendance of a high level of decision makers from 117 countries and all key players along the value chain resulted in a dynamic environment for networking and business. As a consequence, companies were keen to confirm their presence next year; by the time the show closed its doors, 50% of JEC World 2023 exhibition space had already been booked.  Exhibitors and attendees have expressed very positive feedback about the quality of the exhibition and such a successful come-back of JEC World as the pinnacle event of the industry.

Innovations at JEC World
With more than 500 product launches during this year’s show, JEC World remains a popular venue to introduce new products to the global market.

The JEC Composites Innovation Awards celebrated 10 collaborative projects, reflecting the dynamism and the resilience of our industry, and two Innovation Planets displayed 80 impressive applications.

Celebrating its five-year anniversary, the JEC Composites Startup Booster competition is now established to discover startups in the advanced composites sector.

JEC World contributing to a more sustainable world
JEC World’s conference program shone a light on this year’s theme and most impactful topic: Composites for a Sustainable World. Sustainability continues to rise as a key growth driver for the composites industry, enabling diverse application sectors to achieve ambitious sustainability goals, from energy and transportation, to building and infrastructure, and so many more. JEC World highlighted how the growing application of composites will open up exciting new horizons for human activities, improving people’s lives and leading to a better, more sustainable world.

International community
Three Country on Stage presentations showcased the structure and strengths of the composites industries of South Korea, the Netherlands and the United States. The program featured keynote presentations and business cases which demonstrate the countries’ composites expertise  in hydrogen, in sustainable excellence, and innovation in building and mobility, respectively.

Ministers, ambassadors and official representatives from 16 countries also visited the show as part of dedicated official delegation tours from the United States, Turkey, Hungary, Taiwan, Portugal, Croatia, the Netherlands, the United Kingdom, North Macedonia, Germany, Slovakia, Luxembourg, Belgium, Sweden and Spain.

Thus, JEC World was the opportunity for government representatives to meet the leading composites actors of their respective regions or markets and show their support. Official inaugurations also took place on the Dutch, American and British pavilions.

JEC World: METYX and ITA officially join forces (c) METYX
METYX and ITA officially join forces
11.05.2022

JEC World: METYX and ITA officially join forces

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support ITA in developing and growing their network. ITA is located in the centre of the RWTH Aachen University Campus in close proximity to numerous other institutes for lightweight developments.”

Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

(c) Hexcel Corporation
29.04.2022

Hexcel Composite Solutions for the Automotive, Marine, Wind Energy and Recreation Markets at JEC World 2022

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

G-Vent Technology for Marine Structures
Hexcel has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. A full range of Hexcel marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) regardless of the laminate thickness. Leading marine non-destructive testing specialists Q.I. Composites recently confirmed that the thick section G-Vent panels they had evaluated had void contents and laminate quality in line with state-of-the-art autoclaved prepreg components. Visitors to the Hexcel stand will see a unique 400mm carbon cube cured in a single stage using 695 layers of HexPly M79 carbon fiber UD600 prepreg with G-Vent technology.

New HexPly® Nature Range Sustainable Prepregs
HexPly® Nature Range prepregs feature proven resins such as HexPly M49, M78 and M79 with bio-derived epoxy resin content. Created for use in all industrial markets, HexPly Nature Range materials can be seamlessly integrated into existing production processes, maintaining consistent mechanical performance and processing properties. A dedicated sustainability corner of the Hexcel stand will detail Nature Range products optimized for automotive, marine, wind energy and winter sport applications. The display will include an alpine ski produced by leading manufacturer Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature M78.1 UD flax prepreg material. In addition to the reduced environmental impact of the sustainably grown reinforcement, the flax fiber laminates also improve impact resistance and vibration damping in the ski.

HexPly® XF Surface Technology for Improved Part Surface Finish Quality
HexPly XF is a lightweight, semi-preg material that replaces traditional in-mold gel coat. It eliminates time-consuming refinishing work typically required to obtain a paint-ready surface and produces lighter, more consistent parts with shorter cycle times and a cleaner working environment. Visitors to the stand will see a composite panel illustrating a high-quality painted surface enabled with XF technology in a diverse range of industrial applications such as super yacht roof parts, Class A surface automotive panels, and both prepreg and infused wind turbine blades.

HexPly® M49 Prepreg for Automotive Visual Carbon Parts
HexPly M49 is easy to process and is especially suitable for visual carbon fiber-look applications such as the Brabus hood scoop on display on the Hexcel stand at JEC.

HexPly® Prepregs and HiMax® Reinforcements for Performance Marine Structures
Using a scale model of a Gunboat 68 performance sailing catamaran, Hexcel will illustrate how its HexPly and HiMax materials provide manufacturers with a complete set of lightweight composite solutions for high-performance marine structures. HexPly prepreg was selected for critical structural parts of the Gunboat 68 and provides very high mechanical performance including high dry and wet Tg.

Heavyweight HiMax reinforcements offer high deposition rates and remain easy to handle after cutting, making them highly suitable for industrial applications. In combination with a lightweight PrimeTex® woven fabric, the package of carbon fiber HiMax materials developed for the Gunboat 68 enabled consistent resin flow during infusion with reduced surface print-through.

Hexcel Fibers and Reinforcements for Lightweight Sporting Equipment
Sporting equipment manufacturers rely on Hexcel composite materials to deliver the ultimate performance at the lowest possible weight. Hexcel will exhibit a number of the latest high-performance sporting equipment applications such as a Bauer hockey stick featuring PrimeTex 98 gsm AS4C 3K fabric and a Corima tri-spoke cycling wheel made with lightweight Hexcel carbon fiber UD tape. Hexcel will also demonstrate how its HexTow® carbon fibers are used in key leisure and marine applications by displaying an AEROrazr solid carbon rigging component manufactured by spar and rigging manufacturer Future Fibres for the 36th America’s Cup.

 

Source:

Hexcel Corporation / 100% Marketing

Photo: JEC Group
26.04.2022

The Winners of the 2022 JEC Composites Innovation Awards

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

  • Aerospace Application
    Diab (Sweden): 100% thermoplastic panel for cabin interiors
  • Aerospace – Process
    MTorres Disenos Industriales S.A.U. (Spain): Innovative Infusion Airframe Manufacturing System
  • Automotive & road transportation – Structural
    Jaguar Land Rover Limited (UK): TUCANA
  • Automotive & road transportation – Surfaces
    AUDI AG (Germany): Seamless Integration of Flexible Solar Film in FRP
  • Building & Civil Engineering
    Windesheim (Netherlands): Structural Re-Use of Thermoset Composites
  • Design, Furniture and Home
    Kairos (France): Kairlin®, a new recyclable & compostable material
  • Equipment and Machinery
    Fibraworks GmbH (Germany): Winding the future – fibraforce technology
  • Maritime Transportation & Shipbuilding
    Voith Composites SE & Co. KG (Germany): Marine Rotor Blades made of Voith ‘Carbon4Stack’
  • Renewable Energy
    Siemens Gamesa Renewable Energy (Denmark): RecyclableBlade
  • Sports, Leisure & Recreation
    Bcomp Ltd. (Switzerland): Eco-joint from thermoset race and thermoplast road
Source:

JEC Group

(c) Cobra International
26.04.2022

COBRA International: Highlights Diversification into New Market Sectors at JEC World 2022

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Cobra International, a leading manufacturer of advanced composite products for the watersports, automotive, marine, and industrial sectors, will highlight recent diversification into new composite markets at JEC World 2022, with exhibits ranging from VTOL drones to carbon fibre prosthetics.  Cobra will also demonstrate how it is working alongside automotive and water sports customers to further enhance the sustainability of products in these sectors.

High Volume Production Capacity for the UAV sector
Cobra will display a wing from the Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for survey, monitoring and search and rescue operations. Cobra manufactured the 32kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.  

Sustainability Options for Automotive and Watersports
Sustainability has a been a key focus for the Cobra Waterports division and CAC, the Cobra automotive business unit. At JEC World 2022, Cobra will showcase the increasing material and process options it has developed with both bio-resin and natural fibre reinforcements variants presented alongside more traditional carbon fibre parts.

Visitors will be able to get up close to a new Bio SUP Wingfoil board featuring a basalt, flax, bamboo and GreenPoxy bio-epoxy construction created for partners NSP, as well as state-of-the-art compression moulded prepreg foils. Cobra’s first fully recyclable surfboard incorporating the Recyclamine® resin technology that Cobra was recognised for in the 2020 JEC Innovation Awards will also be on display alongside a new Audi e-tron foil by Aerofoils – the world’s safest electric hydrofoil board.

The CAC team (Automotive Business Unit of Cobra) will present a set of OEM mirror cap parts that showcase a range of carbon SMC, woven visual carbon, pure woven visual flax, hybrid flax-carbon and painted flax construction options for the same component.  Clear carbon aesthetic and structural parts including CAC made M-carbon components for the BMW S 1000 RR Motorcycle will furthermore underline the high quality and eye-for-detail for which CAC is renowned.

Carbon Prosthetics
An entirely new composite application for the company, Cobra will also show two composite prosthetic devices at JEC which were productionised by the in-house design and development team. Working alongside a leading Thai university and a medical device OEM, Cobra created a rapid and cost effective series production process for a lightweight carbon fibre prosthetic foot. In another example of lightweight composites creating major quality of life improvements, Cobra has also designed and manufactured a carbon and glass fibre prepreg foot support for Elysium Industries.

More information:
COBRA Composites UAV
Source:

Cobra International

(c) SHIMA SEIKI MFG., LTD.
25.04.2022

SHIMA SEIKI to Exhibit at JEC World 2022

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Also available for video display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible because flat knitting as a textile production method is capable of producing end products that are shaped-toform and with added thickness. Therefore, savings in post-processing time, cost, material and labor as compared to current methods of preform production are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

Source:

SHIMA SEIKI MFG., LTD.

Hypetex at JEC World 2022 (c) Hypetex
Hypetex® to Showcase Coloured Carbon and Flax Fibre Solutions
20.04.2022

Hypetex at JEC World 2022

  • Hypetex® to Showcase Coloured Carbon and Flax Fibre Solutions
  • Hypetex, London, April 20 2022, Booth R52, Hall 6

Hypetex, the market leaders in colouring carbon and natural fibre materials, will demonstrate both the processing and sustainability benefits of its patented colourisation technology when it exhibits for the first time at JEC World 2022.

  • Hypetex® to Showcase Coloured Carbon and Flax Fibre Solutions
  • Hypetex, London, April 20 2022, Booth R52, Hall 6

Hypetex, the market leaders in colouring carbon and natural fibre materials, will demonstrate both the processing and sustainability benefits of its patented colourisation technology when it exhibits for the first time at JEC World 2022.

Exhibiting as part of the Composites UK stand (Booth R52), Hypetex will display its portfolio of uniquely coloured carbon fibre materials including 3K woven styles, ultra-lightweight spread tow fabrics, UD, and 3D materials. Hypetex will also present details of its latest eco-friendly coloured flax materials  which combine sustainably grown natural flax with sustainable colouring technologies. Hypetex patented colouring technology, available in an extensive palette of standard and bespoke colours and shades, can be applied to traditional woven fabric constructions, non-woven UDs, spread tow and bespoke fabric designs. The technology replaces a traditional coloured painted finish, providing an exceptional depth of colour to any composite part, improving thermal conductivity and reducing heat absorption ,whilst reducing the overall weight and processing time with no compromise to the mechanical performance of the composite structure.

By removing the need for painting, and the associated preparation steps, Hypetex technology provides manufacturers with a repeatable straight out of the mould coloured finish, that is not only easy to integrate into all composite processes, but also takes additional materials, consumables, and process time out of the component cost. As part of its continued commitment to leading the drive for more sustainable composite solutions, and its focus on improvements based on the ESG framework. Hypetex will also display its new range of coloured flax fibre textiles. The advanced colouring technology used protects the natural flax fibres throughout the high temperature processes required for composite production, avoiding burning or any discolouration issues common to natural fibres. In addition, Hypetex colouring solution is an ecofriendly sustainable alternative to traditional dyeing processes which are a significant cause of global water pollution.

The Hypetex team will be on hand throughout the show to provide additional details on Hypetex materials and their integration into the manufacturing process. Visitors to the Hypetex stand will be able see Hypetex carbon and flax products in raw fabric, and how its unique colour palette translates into the most distinctive finished moulded components. Hypetex partners SHD Composites, Textreme, Sigmatex and Angeloni will also have materials and components on display at JEC World 2022, including sporting equipment such as racquets, sticks, and skateboards, which highlight the massive range of processing options and potential applications for this novel technology. One such application, the adidas Kromaskin field hockey stick, with a unique Hypetex coloured Textreme spread tow carbon finish, will also be part of the JEC Innovation Planets feature.

Source:

100% Marketing

05.04.2022

ADD-ITC 2022: Call for Abstracts

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

The Aachen-Dresden-Denkendorf International Textile Conference 2022 as face-to-face event takes place on-site in Aachen on December 1-2, 2022.

There is the opportunity to contribute to the conference program and submit an abstract for a talk or poster presentation. The Call for Abstracts for oral presentations ends on May 6, 2022. The Call for Abstracts for poster contributions is open until July 31, 2022.

The ADD-ITC is a conference for experts from the fields of
·    Textile chemistry, finishing & functionalization
·    Synthetic Fibers & Materials
·    Machinery, Processes & Composites

The conference program includes plenary lectures and themed sessions in the areas of
·    Sustainability in the textile industry
·    Future of textile production
·    Textiles for medicine and health
·    Smart textiles & fashion
·    Historic textiles
·    Technology transfer (IGF-ZIM projects)
·    Textile developments by start-ups
 

Further information about the conference program, plenary and keynote speakers as well as the call for abstracts are online availabel.

Source:

Aachen-Dresden-Denkendorf International Textile Conference

Cobra
05.04.2022

COBRA to Sponsor and Manufacture JEC Trophies

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

The 2022 trophies are designed and produced by Cobra’s Design and Development department - the in house team that supports Cobra’s mass production operations with specialist expertise in product design, industrial design & prototyping. The sweeping curves of the trophies are influenced by perfume bottles, linking back to JEC’s French cultural heritage.  The design also combines a pallet of different materials to symbolise the JEC Group’s complete coverage of the composites sector. Acrylic, upcycled teak production waste from the furniture industry, Innegra™, flax, carbon, and aramid materials have been combined with Sicomin’s GreenPoxy 33 bio-resin to reference the award programme’s combined focus on innovation and sustainability.

The JEC Composites Innovation Awards are presented annually, recognising, and rewarding the most cutting-edge and ingenious projects that exploit the full potential of composite materials. Over the last 20 years, the JEC Composites Innovation and Startup programs have celebrated both innovation and partnership. The JEC Group will announce the winners for the 2022 JEC Composites Innovation awards on April 26th in Paris and in live streaming, and the Start-up Booster winners on May 3rd at JEC World.

“Cobra is delighted to reinforce its partnership with JEC Group, sponsoring and manufacturing the JEC trophies for 2022,” comments Danu Chotikapanich, CEO, Cobra.  “These are two of the most prestigious and respected awards programs within the composites industry and one that also matches Cobra’s ongoing commitment to innovation and sustainability improvements. Working with the latest bio resin technology, natural fibre reinforcements and upcycled composite and wood production waste materials our Design and Development team have created some stunning trophies for this year’s award season.”

Source:

COBRA International Co.,Ltd.

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Hexcel Introduces G-Vent Technology into Marine Market (c) Hexcel
New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing
30.03.2022

Hexcel Introduces G-Vent Technology into Marine Market

  • New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing

Hexcel Corporation (NYSE: HXL) has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. Hexcel’s full range of marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) irrespective of the laminate thickness.

  • New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing

Hexcel Corporation (NYSE: HXL) has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. Hexcel’s full range of marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) irrespective of the laminate thickness.

To evaluate the new technology, Hexcel completed a test program with Q.I. Composites, a world leader in non-destructive testing in performance marine applications. The program evaluated HexPlyÒ 40- layer prepreg samples prepared with G-Vent technology. Carbon fiber panels made with no debulking revealed approximately three times less porosity than those using a typical 10-minute debulk with every second ply. Ultrasonic and CT scan analysis by Q.I. Composites confirmed the void content results with porosity levels in line with state-of-the-art autoclaved carbon prepreg foils. Key tensile, compressive and interlaminar shear strength results were also higher for the G-Vent panels.

“We evaluated the quality of thick laminates produced with G-Vent and found that they are comparable to laminates made in an autoclave as per best practice in the market,” said Stefano Beltrando, CEO, Q.I. Composites. “Even more impressive, they were achieved with no debulking.” Tom James, Business Development Manager at Hexcel, said, “We are absolutely delighted with the feedback from Q.I. that confirms our own test data and positions G-Vent technology as a leading OoA process enabler for high-performance thick laminate structures. G-Vent provides a faster and more cost-effective manufacturing route for large marine structures with absolutely no compromise in mechanical performance.”

Source:

100percentmarketing

24.03.2022

SGL Carbon: Initiated transformation shows effect in sales and earnings 2021

  • Sales increase of 9.5% to €1,007.0 million driven by almost all business units
  • EBITDApre improves by 50.9% to €140.0 million, reaching the upper end of the 2021 guidance raised in July
  • Net financial debt reduced from €286.5 million to €206.3 million
  • Start of business in 2022 overshadowed by uncertainty resulting from the war in Ukraine

Rising demand in almost all market segments led to a 9.5% increase in Group sales to €1,007.0 million in fiscal 2021 compared to the previous year (2020: €919.4 million). Almost all business units contributed to the pleasing sales performance. At 50.9%, EBITDApre improved disproportionately to Group sales and amounted to €140.0 million in fiscal 2021 (2020: €92.8 million). Increased sales and the associated higher capacity utilization contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation initiated at the end of 2020.*

  • Sales increase of 9.5% to €1,007.0 million driven by almost all business units
  • EBITDApre improves by 50.9% to €140.0 million, reaching the upper end of the 2021 guidance raised in July
  • Net financial debt reduced from €286.5 million to €206.3 million
  • Start of business in 2022 overshadowed by uncertainty resulting from the war in Ukraine

Rising demand in almost all market segments led to a 9.5% increase in Group sales to €1,007.0 million in fiscal 2021 compared to the previous year (2020: €919.4 million). Almost all business units contributed to the pleasing sales performance. At 50.9%, EBITDApre improved disproportionately to Group sales and amounted to €140.0 million in fiscal 2021 (2020: €92.8 million). Increased sales and the associated higher capacity utilization contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation initiated at the end of 2020.*

Outlook
Based on the assumptions outlined and including the costs of the energy hedges, the company expects Group sales for the 2022 financial year to be at the previous year's level and EBITDApre to be between €110 million and €130 million.*

* See attachment document for more information,