From the Sector

Reset
4 results
Warden Schijve joins the AZL team (c) AZL
Dr. Michael Emonts, Warden Schijve, Philipp Fröhlig und Dr. Kai Fischer (von links nach rechts) im AZL Tech Center
02.11.2020

Warden Schijve joins the AZL team

Aachen - Warden Schijve, former Chief Scientist Composites at SABIC, recently joined the AZL engineering team in October. As Design Leader, he is further expanding the product and application development division of the service provider for business development and technology development in lightweight.

AZL Aachen GmbH supports companies along the entire value chain in implementing competitive lightweight technologies. "We develop component and production concepts for companies, including the analysis of costs and production-relevant KPIs. With our broad range of material and production technologies, we provide a comprehensive solution for the development and evaluation of products and identify the most suitable paths to implementation. Warden Schijve will use his many years of experience to support our partners in the efficient development, evaluation and implementation of component and production solutions through to market readiness," says Dr. Kai Fischer, Managing Partner of AZL Aachen GmbH.

Aachen - Warden Schijve, former Chief Scientist Composites at SABIC, recently joined the AZL engineering team in October. As Design Leader, he is further expanding the product and application development division of the service provider for business development and technology development in lightweight.

AZL Aachen GmbH supports companies along the entire value chain in implementing competitive lightweight technologies. "We develop component and production concepts for companies, including the analysis of costs and production-relevant KPIs. With our broad range of material and production technologies, we provide a comprehensive solution for the development and evaluation of products and identify the most suitable paths to implementation. Warden Schijve will use his many years of experience to support our partners in the efficient development, evaluation and implementation of component and production solutions through to market readiness," says Dr. Kai Fischer, Managing Partner of AZL Aachen GmbH.

From his 35 years in the composites industry with Fokker, DSM and SABIC, Warden Schijve brings a broad and deep expertise in structural design, plastics and composites, as well as processing technology.
Warden Schijve: “In my career I’ve always seen that it pays off to evaluate various different design concepts, which may use different materials or material combinations, to finally come to the most cost-competitive lightweight applications. Taking into account different manufacturing technologies right from the beginning can save a lot in later stages of component development. And this is what fascinates me about AZL and its eco-system: the available knowledge on a wide variation of process and production technologies, including cutting edge equipment, at both the AZL Tech Center, and the various institutes present in the total RWTH Aachen Campus.”

Dr. Michael Emonts, Managing Partner of AZL Aachen GmbH: "We are delighted that Warden Schijve, as a well-known face from the AZL community, will enrich us in developing lightweight applications, production systems and processes, identifying competitive technology optimizations through the analysis of markets and applications, and supporting our customers in the industrial implementation of the developed technologies."

Warden Schijve will also lead the project for a concept study for future battery casings based on composite-based multi-material systems. The AZL started the project in October together with 30 participating companies from the entire value chain to get an overview of existing component solutions, evaluate the advantages of a multi-material approach and develop a multi-material component design including a production concept for battery casings.

Bio Composites Procedure (c) AZL Aachen GmbH
24.09.2020

Starting market and technology study on the Potential for bio-based composite materials

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Dr. Michael Emonts, Managing Partner of AZL: "Together with our partner companies we want to identify hidden business potential for composites with bio-based materials. To do so, we will reapply our established approach for market and technology studies: Based on a detailed market analysis, we will dive deep into the technological evaluation of technologies, applications and business cases.”

Based on a detailed market segmentation, AZL's technology experts analyze the various market segments in terms of their size, growth potential, relevant players and existing and future applications. For the identified applications, the participants in the study will receive detailed insight into the respective technical and legal requirements as well as an overview of value chains, processes and materials. In the following, the strengths and challenges of bio-composites compared to conventional materials are elaborated. The consortium will select the components with the highest potential, for which suitable production scenarios will be developed and analyzed in terms of costs in a business case analysis.

"We are participating in the AZL study to identify and evaluate new product areas with bio-materials. The technological analyses of the AZL studies have already helped us in the past to initiate new developments," says Dr. Steven Schmidt, Director Technology Platforms Materials at REHAU, explaining the motivation for working with the AZL and the industry consortium. "As one of the 50 Sustainability & Climate Leaders, we at REHAU are incorporating environmentally friendly materials into more and more products. Wherever the company is active - from the furniture and construction industries to the automotive industry - REHAU is already developing and manufacturing high-quality products from recycled raw materials. By 2025, REHAU plans to increase its recycling rate across the Group to significantly more than 15 percent and at the same time reduce CO2 emissions by at least 30 percent," adds Dr. Steven Schmidt.

Bio-composites will also be the topic of the upcoming Lightweight TechTalk by AZL on September 29, 2020. Experts from industry and academia will give technology and market insights on sustainability and recycling of composites in 6 presentations. Registration is free of charge at: https://azl-aachen-gmbh.de/termine/recycling-of-composites/.

The kick-off of the project will take place on October 22nd, 2020 in the form of a video conference. Further background information on the project can be found under the following link: https://azl-aachen-gmbh.de/wp-content/uploads/2020/09/2020-251_OP_Bio-Bases_Composites.pdf

03.09.2018

New ENGEL Injection Molding System at AZL of RWTH Aachen University

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

Dr.-Ing. Michael Emonts, Managing Director of the Aachen Center for Integrative Lightweight Production (AZL) is looking forward to realizing new innovative lightweight production process with the new injection molding system: “This new injection molding system offers us as specialists for lightweight production technology in cooperation with the injection molding experts of the Institute of Plastics Processing – the IKV – the opportunity to establish hybrid processes for industrial lightweight applications. The system will expand our existing machinery in the AZL Technical Center and will be available as an important platform for lightweight production research at RWTH Aachen University.”

Being a Partner of the AZL, ENGEL has already been working closely with the AZL for many years as a Partner Company of the AZL Partner Network. Dr. Stefan Engleder, CEO of the ENGEL Group, emphasizes the importance of close collaboration with technical universities and especially with the AZL: “The AZL provides great conditions for industry-related research activities in the field of lightweight composites as it is characterized by a strong interdisciplinary approach. It benefits from the great infrastructure and the collaboration with well-known institutes of the RTWH Aachen University. ENGEL is looking forward to working together with the AZL on developing efficient lightweight composite mass production processes.”

In addition to the numerous composite and lightweight equipment at the RWTH Aachen Campus, the AZL Technical Center comprises large-scale equipment for the development of processes for lightweight production, such as a composite press from Schuler Pressen GmbH with 18,000 kN clamping force.

 

(c) ENGEL AUSTRIA GmbH: (l. to r.) Dr. Norbert Müller (Leiter des ENGEL Technologiezentrums für Leichtbau-Composites), Dr. Michael Emonts (Geschäftsführer des Aachener Zentrums für integrativen Leichtbau (AZL) der RWTH Aachen), Rolf Saß (Geschäftsführer der ENGEL Deutschland GmbH) und Dr. Christoph Steger (Geschäftsführer Vertrieb der ENGEL Holding).
03.09.2018

ENGEL installiert neues Spritzgießsystem im AZL der RWTH Aachen

Das Aachener Zentrum für Integrative Leichtbau (AZL) der RWTH Aachen installiert in seinem Technikum eine neue ENGEL-Spritzgießanlage. Die ENGEL Deutschland GmbH, in Kooperation mit dem ENGEL Technologiezentrum für Leichtbau-Composites in Österreich, wird das 2-Komponenten-Spritzgieß-System mit Drehtisch und 17.000 kN Schließkraft im Jahr 2019 in Betrieb nehmen. Dieser Maschinenaufbau ist die Basis für die Weiterentwicklung effizienter Inline-Kombinations-Technologien mit unterschiedlichen Polymerwerkstoffen.

Das ENGEL-Spritzgießsystem ermöglicht die innovative Kombination bereits etablierter Faserverbundkunststoff-Verfahren und die Entwicklung neuer individueller Verfahren. Im Mittelpunkt steht die Steigerung der Ressourceneffizienz in der Leichtbau-Produktion. Mit der neuen Anlage können neue Forschungs- und Entwicklungsinitiativen einen effizienteren Materialeinsatz adressieren, der letztlich der Schlüssel zur Massenproduktion von Leichtbauteilen ist. Der Fokus wird dabei auf Multimaterialsystemen, kontinuierlichen Prozessen und Prozessketten sowie selbstoptimierenden Prozesse liegen.

Das Aachener Zentrum für Integrative Leichtbau (AZL) der RWTH Aachen installiert in seinem Technikum eine neue ENGEL-Spritzgießanlage. Die ENGEL Deutschland GmbH, in Kooperation mit dem ENGEL Technologiezentrum für Leichtbau-Composites in Österreich, wird das 2-Komponenten-Spritzgieß-System mit Drehtisch und 17.000 kN Schließkraft im Jahr 2019 in Betrieb nehmen. Dieser Maschinenaufbau ist die Basis für die Weiterentwicklung effizienter Inline-Kombinations-Technologien mit unterschiedlichen Polymerwerkstoffen.

Das ENGEL-Spritzgießsystem ermöglicht die innovative Kombination bereits etablierter Faserverbundkunststoff-Verfahren und die Entwicklung neuer individueller Verfahren. Im Mittelpunkt steht die Steigerung der Ressourceneffizienz in der Leichtbau-Produktion. Mit der neuen Anlage können neue Forschungs- und Entwicklungsinitiativen einen effizienteren Materialeinsatz adressieren, der letztlich der Schlüssel zur Massenproduktion von Leichtbauteilen ist. Der Fokus wird dabei auf Multimaterialsystemen, kontinuierlichen Prozessen und Prozessketten sowie selbstoptimierenden Prozesse liegen.

Dr.-Ing. Michael Emonts, Geschäftsführer des Aachener Zentrums für integrativen Leichtbau (AZL) freut sich darauf, mit dem neuen Spritzgießsystem neue innovative Leichtbauverfahren zu realisieren: „Diese neue Spritzgießanlage bietet uns als Spezialisten für die Leichtbau-Produktionstechnik in Kooperation mit den Spritzgießexperten des Instituts für Kunststoffverarbeitung – dem IKV – die Möglichkeit, Hybridverfahren für industrielle Leichtbau-Anwendungen zu etablieren. Das System wird unseren bestehenden Maschinenpark im AZL-Technikum erweitern und als wichtige Plattform für die Leichtbau-Forschung an der RWTH zur Verfügung stehen."

Als aktive Partnerfirma des AZL-Partnernetzwerks arbeitet ENGEL bereits seit vielen Jahren eng mit dem AZL zusammen. Dr. Stefan Engleder, CEO der ENGEL-Gruppe, betont die Bedeutung dieser engen Zusammenarbeit mit den Technischen Universitäten und insbesondere mit dem AZL: „Das AZL bietet beste Voraussetzungen für industrienahe Forschungsaktivitäten im Bereich Leichtbau-Verbundwerkstoffe, da es sich durch einen starken interdisziplinären Ansatz auszeichnet. Das AZL profitiert von der guten Infrastruktur und der Zusammenarbeit mit namhaften Instituten der RTWH Aachen. ENGEL freut sich auf die Zusammenarbeit mit dem AZL bei der Entwicklung effizienter Leichtbau-Verbundwerkstoff-Massenproduktionsverfahren.“

Das AZL-Technikum umfasst neben den zahlreichen Faserverbund- und Leichtbauanlagen auf dem Campus der RWTH Aachen zusätzliches Großserien-Equipment für die Entwicklung von Verfahren zur Leichtbau-Produktion, wie zum Beispiel eine Composite-Presse der Schuler Pressen GmbH mit 18.000 kN Schließkraft.

More information:
AZL
Source:

AZL Aachen GmbH