From the Sector

Reset
35 results
Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

18.08.2023

Baldwin Launches New PrintEnomic$ Online Resource

Baldwin Technology Co. Inc. has launched PrintEnomic$, a new online resource of specialized eBooks and resources for corrugated, narrow web and sheet-fed and web offset printers at PrintEnomics.com.

The collection of Baldwin videos, podcasts and instructional guides are available for free and without firewalls to help maximize printer profitability. The eBooks analyze trends, issues, and technology options specific to printers in all three categories.

More than 5,000 print industry professionals have already downloaded or viewed earlier, limited-release eBooks “Untangling the Web” for narrow web and “From Beast to Beauty” for corrugated. The addition of “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” for sheet-fed and web offset printers completes the comprehensive PrintEnomic$ portfolio.
 
Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – the eBooks explore pressing topics including sustainability, labor challenges, counterfeiting, and brand protection.

Baldwin Technology Co. Inc. has launched PrintEnomic$, a new online resource of specialized eBooks and resources for corrugated, narrow web and sheet-fed and web offset printers at PrintEnomics.com.

The collection of Baldwin videos, podcasts and instructional guides are available for free and without firewalls to help maximize printer profitability. The eBooks analyze trends, issues, and technology options specific to printers in all three categories.

More than 5,000 print industry professionals have already downloaded or viewed earlier, limited-release eBooks “Untangling the Web” for narrow web and “From Beast to Beauty” for corrugated. The addition of “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” for sheet-fed and web offset printers completes the comprehensive PrintEnomic$ portfolio.
 
Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – the eBooks explore pressing topics including sustainability, labor challenges, counterfeiting, and brand protection.

Source:

Baldwin Technology Company Inc.

(c) Baldwin Technology Company Inc.
13.07.2023

Baldwin releases latest PrintEnomic$ eBook

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – Baldwin explores four trends in the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook:

  • The resurgence in book publishing
  • Labor challenges
  • Direct mail marketing as a cure for screen fatigue
  • Sustainability
Source:

Baldwin Technology Company Inc.

(c) Baldwin Technology Company Inc.
05.05.2023

Baldwin presents range of technologies at Graphics Canada

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 
Rounding out its technology, Baldwin’s cleaning solutions automatically and safely clean cylinders, blankets and plates used in various production processes, and tackle cleaning tasks like hickey-picking, end-of-run plate cleaning, blanket cleaning and film cylinder cleaning.
 
Common to all the technologies is that they increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products. With easy automation and compatible software, Baldwin’s technologies are seamlessly integrated with one another.

Source:

Baldwin Technology Company Inc.

(c) Baldwin Technology Company Inc.
08.02.2023

Majocchi uses Baldwin’s Corona Treatment Technology

Majocchi, an Italian textile manufacturer, reports that it has achieved functional and visual appeal with its key fabrics since installing Baldwin Technology Co. Inc.’s corona surface treatment technology.  

Based in Tavernerio (Como), Majocchi has a history of being a technological innovator in the textile industry. Within a decade of its conception in 1941, Majocchi became a global supplier of waterproof cotton for rainwear manufacturers. In the 1960s, the company began producing nylon and technical fabrics, which paved the way for it to become a leading provider of textiles for urban fashion, technical workwear and the military today.

Majocchi has partnered with U.S -based Baldwin Technology Co. to utilize its unrivaled corona surface-treatment technology to produce superior wettability and adhesion.  

Majocchi, an Italian textile manufacturer, reports that it has achieved functional and visual appeal with its key fabrics since installing Baldwin Technology Co. Inc.’s corona surface treatment technology.  

Based in Tavernerio (Como), Majocchi has a history of being a technological innovator in the textile industry. Within a decade of its conception in 1941, Majocchi became a global supplier of waterproof cotton for rainwear manufacturers. In the 1960s, the company began producing nylon and technical fabrics, which paved the way for it to become a leading provider of textiles for urban fashion, technical workwear and the military today.

Majocchi has partnered with U.S -based Baldwin Technology Co. to utilize its unrivaled corona surface-treatment technology to produce superior wettability and adhesion.  

Corona treatment is a technique that temporarily modifies a substrate’s surface tension  properties. The corona oxidation process improves the penetration and absorption of liquids on cellulosic and synthetic fabrics. Utilizing corona treatment before resin application on fabrics such as lycra and nylon facilitates superior adhesion and resin distribution. As a result, corona-treated fabrics provide exceptional color and tonal quality.  

Majocchi uses Baldwin’s Corona Pure Model to apply polyurethane and acrylic-based coatings to its fabrics. The system allows Majocchi to administer a controllable, uniform coating to achieve the desired functionality and aesthetics.

The system is 2,000 millimeters wide with a discharging station and four ceramic electrodes designed for textile applications with the flexibility of customizing plasma dosage for a given fabric structure, width and process speed. The Corona Pure model allows for fabric treatment up to 300 gr/m² in thickness. The system is customizable, with single-sided and dual-sided treatment capabilities. The “Easy Change” feature allows for a seamless replacing of electrodes and rapid cleaning and removal of fiber and dust residue, maintaining optimal exhaust air flow. The treatment system is built with a swiveling housing mechanism, which provides clearance for changes in textile thickness and protects the ceramic electrodes.

More information:
Baldwin Majocchi Coatings Covid-19
Source:

Baldwin Technology Company Inc.

Photo: Baldwin Technology Company Inc.
Adina Starke
13.12.2022

Adina Starke joins Baldwin Technology as West Coast Regional Sales Manager

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Source:

Baldwin Technology Company Inc.

02.12.2022

Baldwin presents sustainable TexCoat G4 Finishing System at Igatex Pakistan

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin’s TexCoat G4 non-contact precision-spray technology helps textile finishers up their game by enabling consistent, high-quality finishing, with zero chemistry waste and drastically minimized water and energy consumption. With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.

Source:

Baldwin Technology Company Inc.

(c) Baldwin Technology Company Inc.
Baldwin’s Rick Stanford and Fi-Tech’s Ian Mills kick off partnership with a handshake
03.10.2022

Baldwin Technology partners with Fi-Tech to represent textile finishing technologies

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

“With the increasing demand of Baldwin’s finishing technology, we needed to find the right partner for sales promotion in the U.S. and Canadian markets for knits, wovens and non-wovens,” said Rick Stanford, Baldwin Technology’s VP Global Business Development, Textiles. “Fi-Tech of Richmond, Virginia is the perfect partner. They are well established in the textile and non-wovens industry and their portfolio of principals provides excellent synergy with Baldwin’s precision spray and plasma treater systems.”

Baldwin’s solutions are used in a wide variety of fabrics from basic jersey and fleece with softening and anti-microbial finishes to technical fabrics such as outdoor gear, military, upholstery, automotive and industrial fabrics utilizing the latest in technical finishes such as DWR, soil release, flame retardants and insect repellent among others.

Source:

Baldwin Technology Company Inc. / Adduco Communications

Baldwin’s non-contact spray technology Texcoat G4. (Photo: Baldwin)
15.06.2022

Archroma and Baldwin to collaborate for optimized performance and resource saving in textile finishing

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Baldwin, a leading global manufacturer and supplier of precision spray systems and technology for sustainable textile manufacturing, announce a new collaboration to optimize performance and resource saving in the finishing department.

The two companies aim to support textile manufacturers in their development projects, targeting to improve their product safety, performance and functionality, while at the same time maximizing the productivity and resource utilization of the finishing application process.

Archroma and Baldwin are collaborating in multiple projects that combine Archroma’s most sustainable product innovations with Baldwin’s Texcoat G4.

TexCoat G4 is a non-contact spray technology for textile finishing and remoistening, designed to allow a controlled and optimal coverage of the exact amount of finish chemistry for reaching specific characteristics of the fabric. The system can be used to reduce water consumption by as much as 50% compared to traditional padding application processes.

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Baldwin, a leading global manufacturer and supplier of precision spray systems and technology for sustainable textile manufacturing, announce a new collaboration to optimize performance and resource saving in the finishing department.

The two companies aim to support textile manufacturers in their development projects, targeting to improve their product safety, performance and functionality, while at the same time maximizing the productivity and resource utilization of the finishing application process.

Archroma and Baldwin are collaborating in multiple projects that combine Archroma’s most sustainable product innovations with Baldwin’s Texcoat G4.

TexCoat G4 is a non-contact spray technology for textile finishing and remoistening, designed to allow a controlled and optimal coverage of the exact amount of finish chemistry for reaching specific characteristics of the fabric. The system can be used to reduce water consumption by as much as 50% compared to traditional padding application processes.

Archroma and Baldwin are currently testing Archroma’s finishing products and systems, such as the soon-to-be-launched PFC-free* Smartrepel® Hydro SR for water-based soil repellence, as well as metal and inorganic particle-free antimicrobial technologies like Sanitized T 20-19 and TH 15-14, which will be launched at the upcoming Techtextil 2022.

The first test results will be available for discussions with both partners at Techtextil at their respective booths.

(c) Baldwin Technology Company Inc. / Barry-Wehmiller
26.05.2022

Baldwin’s TexCoat G4 finishing system minimizes chemical and water waste

Baldwin Technology Company Inc. has announced the installation of its TexCoat G4 finishing system at Graniteville Specialty Fabrics, a recognized leader in the production of specialty coatings and coated fabrics. With Baldwin’s cost-efficient and highly sustainable spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.

Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets, and others. The company excels in developing and sourcing custom coatings, and creating specialized technical solutions to meet specific, and often unique, end-user requirements. The installation of Baldwin’s TexCoat G4 is part of a major facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

Baldwin Technology Company Inc. has announced the installation of its TexCoat G4 finishing system at Graniteville Specialty Fabrics, a recognized leader in the production of specialty coatings and coated fabrics. With Baldwin’s cost-efficient and highly sustainable spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.

Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets, and others. The company excels in developing and sourcing custom coatings, and creating specialized technical solutions to meet specific, and often unique, end-user requirements. The installation of Baldwin’s TexCoat G4 is part of a major facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. This system utilizes non-contact precision-spray technology, ensuring precise finishing coverage with the exact amount of chemistry for reaching the optimal performance of the fabric. Changeovers (pad bath emptying, cleaning and refilling) are significantly reduced, resulting in substantial chemical conservation and increased productivity.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) Baldwin Technology Company Inc.
11.05.2022

Baldwin showcases its “Complete Solution” for security print at Tax Stamp and Traceability Forum

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

Baldwin Technology Company Inc., an innovator of advanced color-management solutions and inspection technology for the printing industry, will present its “Complete Solution” for printing and inspection at the Tax Stamp and Traceability Forum, held May 16 to 18 in Malta.

Baldwin’s Complete Solution can be any combination of feeders (roll or sheet), vacuum tables, inspection systems, inkjet printers, UV ink-curing systems, reject gates and bins, sheet stackers, and real-time monitoring and reporting tools. Alongside Baldwin’s technologies, optional solution components can be joined together through partnerships with suppliers to create a world-class solution.

For advanced defect detection, Baldwin’s Guardian PQV 100% Print Inspection camera systems can be mounted on one or both sides of the product to perform 100% print-quality inspection, verify variable data and inspect the most challenging security print features. The system offers lighting options for all materials and substrates, as well as for special applications, including holograms, covert serialization, covert security features and more. The Guardian PQV can also be retrofitted to existing presses, machines and transports.
 
As part of a data-connected defect-management workflow, the Guardian PQV is a feature-rich inline defect-detection system that enables printers to find and remove defects quickly—and monitor their processes to prevent defects from occurring again or repeatedly. This technology provides complete print-quality verification from prepress through production, reporting and archiving for perfect runs.

Baldwin recently realigned its sales teams to optimize service and simplify access to its process-improvement and consumables technologies for printing and packaging customers in more than 100 countries. Two new sales professionals have since joined the team, covering smaller regional geographies and providing customers with a single point of contact for all of Baldwin’s product lines.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

29.04.2022

Baldwin showcases connected process technologies at Print4All

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin’s Print4All booth also will showcase Industry 4.0 and industrial Internet of Things-enabled technologies that work together to achieve greater uptime, productivity and automation. Featured solutions pair sensor-gathered data with operational data from Baldwin equipment to gain live, actionable insights to improve production monitoring, so printers and converters can achieve new levels of color consistency with fewer defects and greater assurance of curing.

Other highlights in Baldwin’s booth include the Corona Slim treatment system, which ensures the exact dyne levels needed for perfect uniformity in application, and the Guardian PQV 100% Print Inspection, which provides complete print quality verification from prepress through production, reporting and archiving.

Source:

Barry-Wehmiller

13.03.2022

Baldwin to showcase key innovations at ICE Europe in Munich

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin provides converters with expertise and a broad range of market-leading innovations that offer superior print results, and enhance the economic and environmental efficiency of print production processes. Solutions on display at ICE will include automated cylinder cleaning systems, corona surface pretreatment systems, LED-UV curing and IR-drying systems, hot-air dryers, rotary spray systems, and technologies for color management and defect detection, all of which increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products.

Source:

Barry-Wehmiller for Baldwin

Oliver Jentschke Foto: Baldwin Technology Company Inc.
03.03.2022

Baldwin: Oliver Jentschke joins to lead European sales team

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Baldwin Technology Company Inc. announced that Oliver Jentschke, an industrial engineer with a long track record as a customer-focused sales leader, has joined the organization as Vice President of Sales for Europe. His experience leading and developing commercial teams, along with his results-driven approach and passion for enhancing the customer experience, will be instrumental as he builds and delivers Baldwin’s print sales strategy across Europe.
 
Jentschke is a highly skilled commercial leader, most recently working for ratioparts GmbH (part of Arrowhead Engineered Products), where he was the Sales Director for Europe. Prior to that, Jentschke was the Sales Director for Oerlikon and ROFIN-LASAG AG. He also spent time as the Business Development Manager for Rotoflex/Mark Andy Inc., where he and his sales team drove revenue growth and market expansion throughout Europe. Jentschke received an industrial engineering degree from the University of Cologne in Germany.

Source:

Baldwin Technology Company Inc.

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

17.02.2022

Baldwin appoint Scott Burnett and Thomas Kobrak as new sales professionals

Baldwin Technology Company Inc. is pleased to announce that sales professionals Scott Burnett and Thomas Kobrak have joined the organization. Baldwin recently realigned its sales teams to provide a single regional point of contact for printing and packaging industry customers, optimizing service and simplifying access to the company’s process-improvement and consumables technologies, as well as access to technical experts.

Burnett is now serving as Baldwin’s Regional Sales Manager for the west-central region. He is responsible for driving sales growth with print and packaging customers in Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota and Wyoming. His experience within the industry and the knowledge he gained from previously being a Baldwin customer at Cedar Graphics in Iowa uniquely position him to understand customers’ needs and share the value of Baldwin’s products.

Baldwin Technology Company Inc. is pleased to announce that sales professionals Scott Burnett and Thomas Kobrak have joined the organization. Baldwin recently realigned its sales teams to provide a single regional point of contact for printing and packaging industry customers, optimizing service and simplifying access to the company’s process-improvement and consumables technologies, as well as access to technical experts.

Burnett is now serving as Baldwin’s Regional Sales Manager for the west-central region. He is responsible for driving sales growth with print and packaging customers in Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota and Wyoming. His experience within the industry and the knowledge he gained from previously being a Baldwin customer at Cedar Graphics in Iowa uniquely position him to understand customers’ needs and share the value of Baldwin’s products.

In addition, Kobrak is now serving as Baldwin’s Regional Sales Manager for the West Coast region. He is responsible for driving sales growth with print and packaging customers in Alaska, Arizona, California, Idaho, Nevada, Oregon, Utah, Washington and western Canada. Most recently, he was a sales representative for global film manufacturer Multi-Plastics.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

30.11.2021

India’s Maruti Printing with Baldwin’s LED-UV technology

Maruti Printing transformed its business as the first printer in India to adopt the latest LED-UV curing technology from AMS Spectral UV, a Baldwin Technology Company. The hybrid system, which includes traditional UV modules, has been in production for nearly two years and has significantly expanded the offset printer’s capabilities for its customers, including adding the ability to print on all types of plastic substrates.

Not only does Maruti have the distinction of being an LED-UV trailblazer in India, but it also is first in the market to upgrade a high-speed, high-performance Heidelberg Speed Master 72F+L six-color printer with coating tower—which prints up to 15,000 sheets per hour—with AMS Spectral UV’s high-power AMS XP9-I Series LED-UV and P3 Smart UV curing modules.

Established in 1986 and headquartered in Ahmedabad, Gujarat, Maruti serves customers throughout India, providing offset printing of scratch cards, banners, booklets, brochures, calendars, danglers, pamphlets, posters, stickers and envelopes.

Maruti Printing transformed its business as the first printer in India to adopt the latest LED-UV curing technology from AMS Spectral UV, a Baldwin Technology Company. The hybrid system, which includes traditional UV modules, has been in production for nearly two years and has significantly expanded the offset printer’s capabilities for its customers, including adding the ability to print on all types of plastic substrates.

Not only does Maruti have the distinction of being an LED-UV trailblazer in India, but it also is first in the market to upgrade a high-speed, high-performance Heidelberg Speed Master 72F+L six-color printer with coating tower—which prints up to 15,000 sheets per hour—with AMS Spectral UV’s high-power AMS XP9-I Series LED-UV and P3 Smart UV curing modules.

Established in 1986 and headquartered in Ahmedabad, Gujarat, Maruti serves customers throughout India, providing offset printing of scratch cards, banners, booklets, brochures, calendars, danglers, pamphlets, posters, stickers and envelopes.

In January 2020, Maruti took delivery of two AMS XP9-I Series LED-UV modules to cure colors in the interdecks. The modules are ideal for the highest-speed curing situations that require consistent peak intensity to the substrate, which is the case for Maruti’s offset printing standard of perfection with every cure.

To cure ink, as well as a growing variety of LED coatings, Baldwin’s AMS Spectral UV modules can be located after print units, or in the press delivery after the coater. When inks and coatings are cured with LED-UV, they become instantly dry via photopolymerization, allowing for printing on any substrate, including plastics and metallized stocks. Plus, work can be immediately finished and sent to the bindery once it comes off the press, without the need for heat, spray powder or drying time.

In addition, Maruti took delivery of two P3 Smart UV curing modules for installation at the end of the press to cure any type of UV coating and expand the company’s scope of coating compatibility to general UV coatings in order to offer its customers the widest range of UV printed choices in the Indian market.

The P3 Smart UV housings are completely liquid-cooled to ensure safe, consistent performance and increased uptime, and modules feature a universal design, so that any unit can fit any print unit location. P3 modules can be changed, inspected and cleaned quickly and easily, without tools, and lamps slide and lock into place smoothly and securely.

The durability of the equipment and its chipset was a critical deciding factor in India’s climate. The latest-generation power-and-control cabinets are dust- and moisture-resistant, allowing them to withstand extreme heat and humidity, as well as powder and airborne contaminants, making the equipment ideal for operation in stressful conditions anywhere in the world. AMS Spectral UV’s latest generation of LED chips, designed for the highest-intensity curing applications, enable the curing of LED inks and coatings at record-setting speeds. They are built with resilient components, and the semi-conductor components are sealed, which allows the chips to work in a variety of rugged environments. Additionally, integrated circuits incorporated into the design electronically protect the LEDs and the entire system.

Source:

Baldwin Technology Company / Barry-Wehmiller

25.10.2021

TMAS members showcase sustainable finishing technologies

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.