From the Sector

imm cologne will not take place on the planned dates in January 2022 in Cologne. The executive board of Koelnmesse reached this decision in close consultation with the Association of the German Furniture Industry (VDM) and in agreement with other well-known industry representatives at the international level. "This step is restricted exclusively to imm cologne and its specific requirements for trade fair operations. We are principally planning, as before, to carry out our spring events in 2022. The political guidelines allow for this, and, following the excellent and safe course of the past autumn trade fairs, this must remain our mission in the interests of the participating industries“, says COO Oliver Frese.

The VDM, as the industry sponsor of the event, and against the background of the current pandemic situation, sees the economic success of the event and thus the successful restart of imm cologne in January as extremely endangered. "Following consultation with numerous exhibitors, industry representatives and trading partners, there is either no question of participation on the part of German exhibitors or exhibitors from the German-speaking region, or this is very much in doubt", according to Jan Kurth, CEO of the VDM.  Similar feedback also came from many European countries.

"The current special basic conditions in the interior design industry make the practicability of imm cologne almost impossible", according to Oliver Frese. "We didn't make this very bitter decision easy for ourselves, but consider it to be our obligation to take this step now in close consultation with the industry. In this way we provide clarity and planning security in the interests of our exhibitors. In our shared perspective, an imm cologne with its claim as a leading trade fair for the interior design industry is not realisable in the current situation", the COO continues. "We are currently working actively on options for also still being able to offer exhibitors of imm cologne an attractive trade fair presence at the international level. Here, both spoga+gafa and ORGATEC present excellent alternatives in the interior design portfolio of Koelnmesse".

The cancellation is restricted to imm cologne and expressly does not include other B2B events planned for spring 2022 in Cologne. In autumn, the Cologne art fairs and the nutrition fair Anuga, among others, demonstrated that trade fairs are also once again possible at the international level and can be carried out safely for everyone. It is currently quite clear how differently individual industries are reacting to the present situation. "We have determined a heterogeneous estimation among the exhibiting companies in the face of the enduring pandemic situation in Germany", according to Oliver Frese, COO of Koelnmesse. The assessments vary in degree specific to different industries, "sometimes with a greater impact on the respective trade fair and sometimes hardly palpable", the COO continues. "In the interests of cooperation in a spirit of trust, we are of course communicating closely with our industries and customers, in order to be able to reach just these kinds of industry-specific decisions," according to Frese.

The hygiene and safety concept of Koelnmesse, which remains entirely in keeping with the decisions of the Minister-President Conference and the Corona Protection Ordinance of NRW, stands for safe processes.

A positive picture was still taking shape for imm cologne as a whole with the end of the term for cancellation without penalties in mid-October: with 600 exhibitors from more than 50 countries, the event would still have been the largest and most relevant forum for the interiors industry, hosted in Europe’s biggest furniture market, even in this smaller form in terms of numbers.

The professional exchange and the networking between internationally active companies and highly qualified trade visitors provide the basis at every imm cologne for future-oriented innovations and the development of new business models. In this way, imm cologne ensures important business impulses for the industry. Koelnmesse, together with the VDM and the exhibiting industry, will therefore do everything possible to get a powerful and innovative imm cologne 2023 on its feet.        

Against the background of the worsening pandemic situation in Germany over the past two weeks and the associated restrictions, Heimtextil, scheduled to take place in the second week of January, is cancelled. Messe Frankfurt is working with the industry to determine whether and in what form a new offering in the summer of 2022 can be organised to run parallel to the Techtextil/Texprocess trade fair duo. Later events such as Ambiente, Christmasworld, Creativeworld, Paperworld and Frankfurt Fashion Week are still planning to take place at the present time.

Due to the unforeseeable dynamics in the development of the pandemic, the reciprocal and cumulative effects of the relevant factors, as well as the extreme escalation and deterioration of the pandemic situation in Germany within a very short period of time, including the decisions taken at the Conference of Minister Presidents on 02.12.2021, the date of Heimtextil right at the beginning of the year, in the second week of January, cannot be kept. Heimtextil, the leading international trade fair for home and contract textiles, will be cancelled. Messe Frankfurt is working closely with all industry partners to find out whether and within what framework Heimtextil can be held parallel to Techtextil and Texprocess from 21 to 24 June 2022.

Heimtextil as an international trade fair has always kicked off the spring trade fair season and is the first major international trade fair in Germany directly after Christmas and New Year with exhibitors and visitors from over 135 countries. The exponential increase in the number of infections in a very short period of time and the accompanying multitude of developments and resolutions that are clearly outside the realm of influence of the organizer have led to a significant deterioration in the general conditions and necessary requirements for holding Heimtextil as a major trade fair of international relevance at this early stage. These developments include in particular the classification of Germany as a high-risk area and the associated travel warnings, international and intercontinental travel restrictions in India, Japan, the United States and Great Britain, as well as the quarantine obligation and “2G” (only with vaccinated and recovered status) requirements without recognition of the WHO vaccine list in Germany. Equally important are the steadily rising infection figures and the accompanying urgent appeal, including by the Robert Koch Institute, to reduce contacts to a minimum and to cancel all major events.

A large number of the exhibiting and visiting companies at Heimtextil are currently reacting to this with travel and trade fair attendance bans out of an obligation of concern towards their employees to protect them from health risks. The global willingness to travel is continuing to fall rapidly.

The planning and staging of the other spring trade fairs Ambiente, Christmasworld, Creativeworld and Paperworld is not affected. Due to their later dates in the year, at the end of January and mid-February respectively, these fairs are still planning to take place at the present time. Compared to Heimtextil, which is the most international trade fair at the Frankfurt location, Frankfurt Fashion Week currently has a much lower international profile and from this perspective can therefore still take place. The extremely volatile situation is continuously reviewed and evaluated in close exchange with the relevant authorities and industry partners.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

• DiloGroup looks forward to participating in the Techtextil India show 2021.

DiloGroup offers tailor-made production systems from one supplier and will inform at this forum in the German pavillon about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts.

The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products. The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

With more than 370 installations delivered to the nonwovens industry worldwide, DiloGroup has the necessary know-how and the complete equipment portfolio to engineer the perfect production line for any product specification. The efficiency of Dilo production lines is the result of long-term research work and experience. Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

Beaulieu Fibres International is attending INDEX™20 in Geneva and is excited to accelerate its work helping customers to exceed in product performance and sustainability.

For nonwoven converters serving the hygiene segment, a feature at INDEX™20 will be the company’s optimized Meralux specialty fibre, with fit for use performance and sustainability properties. It offers opacity improvements (reduction of TiO2 for the same opacity levels), higher coverage, higher bulkiness, and improved liquid management.

In addition, Meralux fibres deliver substantial sustainability benefits including about 55% savings in raw materials, with equivalent carbon emission savings, thanks to weight reduction in nonwovens for the same coverage, and higher recyclability of PP/PE.

The latest additions to the hygiene fibres portfolio are Meraspring BICO PET fibres. Meraspring enables nonwovens to combine a softness and loftiness that provides a cushioned, even “well-being”, experience for end-users of applications such as diapers and fem-pads. The fibres are available in a range from 1.7-8.9 dtex with hydrophilic, hydrophobic and wellbeing finishes depending on the properties required in the final product.

In the industrial fibres segment, UltraBond thermal bonding fibre will finally be presented with its INDEX™20 Nonwovens Award in the category "sustainable raw material".

In addition, Beaulieu Fibres International’s new range of MONO low count and BICO fibres are setting new performance standards for the fast-growing air and liquid filtration markets.

At INDEX™20, Beaulieu Fibres International also presenets its Pilot Line to test the waters of co-development opportunities without risk. The Pilot Line offers the utmost flexibility to produce samples, without the typical constraints imposed by industrial production lines, replicating any type of staple fibre spinning technology using different types of polymers and additives and different types of cross sections.

Elleti Group, an Italian manufacturer specialized in denim treatments and garment making, will present an innovative approach: how we experience denim and its transformation processes.

Elleti Group will display its “Green Replicants” project in a new and improved “Lighter. Better. Wiser.” edition.  This project, inaugurated a few years ago, recreates some of the iconic pieces from the Elleti Group Museum of Denim (dating back to the 19th century) with today’s most advanced environmentally sustainable technologies. This special edition replicas are fully developed using the latest addition to the sustainable tools of the company: the “Wiser Wash” technology, a patented washing method that eliminates the use of all potentially harmful chemicals and pumice stone, while drastically reducing the water consumption throughout the process.
 
Moreover, at the Immaterial M.O.D.E. booth, a special project designed by Denim Première Vision and realized in collaboration with Elleti Group and Sense – Immaterial Reality will take visitors through an Augmented Reality installation to explore a selection of legendary pieces from M.O.D.E., Museum of Denim by Elleti Group. By downloading the app, available on every digital store, on your phone or tablet and looking out for the signage on site, unique denim masterpieces will be at everyone’s fingertips.

Itema, a worldwide manufacturer of weaving solutions, will be for the first time at the Denim Première Vision fair. The company is renowned in the industry to be one of the only manufacturers to produce all the top three weft insertion technologies – rapier, air-jet and projectile.

The company will highlight the iSAVER® technology: designed by Itemalab®, the Itema advanced innovation company. Thanks to iSAVER®, one thousand kilos of cotton per loom a year will be saved – i.e. 3% of total raw materials – which will prevent wasting 20 million litres of water, while saving costs for about €2.000 a year on each loom. iSAVER® significantly contributes in making the denim production greener.

Not only since 2021 has sustainability been a topic high on society’s agenda. And yet the importance of sustainability for consumers and companies has once again increased sharply as a result of the Corona pandemic, as numerous studies confirm. Then why is it often so difficult to implement this conviction in everyday life? One of the biggest obstacles to sustainable consumer behaviour is the lack of availability of alternatives.

In addition to changing consumer demands, the EU Commission's recent decision on the single-use plastics directive is also prompting many nonwovens manufacturers to look at alternative solutions. Kelheim Fibres is exhibiting at this year's INDEX in Geneva and online with bio-based fibers that offer an alternative to synthetic materials in a wide range of applications. The Bavarians have decades of experience in the nonwovens and hygiene sectors and work on individual customer-specific innovations.

"We want to make it easy for consumers to choose an environmentally friendly option. That’s the case when bio-based solutions offer the same performance as synthetic products," said Matthew North, Commercial Director at Kelheim Fibres." Our fibre technology allows us to create just that: unlike natural fibres, which are available already in fibre form and can only be treated on the surface, we can engineer the properties of our fibres they need for specific applications by specifically intervening in the production process. That way we combine nature - our fibres are made of wood pulp - with performance."

Kelheim's special fibres are made of wood pulp from sustainably managed sources, are produced in Kelheim in an environmentally friendly way and are fully biodegradable at the end of their product life. Kelheim Fibres is the first viscose fibre manufacturer in the world with an EMAS validated Environmental Management System and was awarded a dark green/light green shirt in the most recent Canopy HotButton-Ranking.

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

• Bräcker
• Graf
• Hunziker
• Loepfe
• Luwa
• Polytex
• Rieter
• Santex Rimar
• Sedo Engineering
• SSM
• Stäubli
• Uster
• Willy Grob

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

• A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
• Several printing modes to ensure maximum flexibility in terms of design capability
• New, real-time image processing that eliminates time spent in image pre-calculations
• A user friendly, intuitive interface
• A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.