From the Sector

Grosvenor, an international retail development and investment company, has launched a search for new technologies that promote innovation and create a social customer experience. A major aim of the challenge was to drive retail recovery in a post-pandemic world where bricks and mortar stores saw footfall slump. Zyler’s try-on solution impressed the judges and the companies will launch the technology with Grosvenor’s retail tenants.

Zyler’s patented technology allows customers to see themselves in any outfit with a head and shoulders photo and basic measurements virtually. For retailers, the try-on experience can be embedded into a website or existing app with only a small snippet of code needed.

HeiQ takes advantage of its presence at ISPO Munich 2022, 28th-30th of November, to launch HeiQ Mint, the new proprietary odor control technology. It is plant-based and designed to make textiles smell fresh even if we use them repeatedly, avoiding the need for frequent washes, thus enabling to save water and energy.

HeiQ Fresh MNT-01, under the HeiQ Mint product family, jointly developed with Patagonia, addresses body odors on textiles and regenerates at every wash, with superior efficiency and durability that meets most end-use performance requirements, while keeping all the fabric properties such as breathability, hand feel, or wicking. This textile technology is OEKO-TEX® suited, bluesign approved, and ZDHC compliant, with a USDA bio-preferred certification in progress.

The product development tests were highly demanding, with HeiQ Mint standing out in comparison to the other two tested solutions. According to Laura Hoch, Patagonia’s Materials Innovation Engineer, “out of all the anti-odor technologies we tested, HeiQ Mint provided the highest odor control performance, with the added benefit of being plant-based. This innovation enables Patagonia to deliver our customers high-performing products made with the best available chemistry.”

Another advantage of HeiQ Mint is the ability to be applied and marketed worldwide, without the need for biocidal declaration on product labels, since it is based on a blend of essential mint oils and naturally derived deodorizing ingredients. HeiQ Mint is just Fresh by Nature.

It is ideal for next-to-skin products like sports apparel, underwear, linings, casual and business wear but also home textiles such as bed linen, pillow fabrics, or mattress textiles, both on cellulosic and synthetic fibers.

The 11^th India ITME will take place from December 8.– 13., 2022, in Noida, India. Over 1,800 exhibitors and more than 150,000 trade visitors from the textile and apparel industry from all over the world are expected. Groz-Beckert will be presenting innovations from its various product areas..

India ITME takes place every four years and is the ideal technology platform for forward-looking innovations in the textile world. At the 11th edition of India ITME, exhibitors will be presenting their highlights from research and development across 15 halls.

The Knitting Product Division will be presenting several new products at India ITME: Among them the SAN™ SF staple fiber needle and the SNK SF staple fiber sinker, which are specially designed for use on large circular knitting machines. The division will also be exhibiting the SAN™ TT for application-related use in the field of technical textiles for flat knitting machines, as well as a needle which enables the advance into new dimensions of gauge in the flat knitting sector.

Groz-Beckert will also be demonstrating its competence as a system supplier in the field of warp knitting at the India ITME. The warp knitting machine needles and system parts from Groz-Beckert are precisely matched to one another and achieve a uniform and flawless warp knitting process.

With the WarpMasterPlus and the KnotMaster, the Weaving product division presents the latest generation of drawing-in and knotting machines from Groz-Beckert. They are particularly distinguished by their ease of operation and flexibility.

The product area Felting (Nonwovens) presents its product and service highlights for the nonwovens industry. These include the HyTec P jet strip for spunlace customers as well as the GEBECON felting needle, the dur needle, EcoStar felting needle and the Groz-Beckert customer product. The HyTec P-nozzle strip is characterized by improved handling and higher hardness. The patented GEBECON felting needle offers an improved surface finish and optimized breakage bending properties.

The Carding product area will present its further developments for the spinning industry. These include the new stationary flat series, the TV56 revolving top and the cylinder wire set with special tooth geometry. The new stationary flat series is characterized by an innovative tooth geometry and a new type of tooth distribution. The new TV56  revolving top with its new setting pattern and 560 points per square inch is particularly easy to clean. The improved cylinder wire convinces with its special and patented tooth shape, which has a positive effect on the maintenance effort. This makes it particularly suitable for quality-oriented cotton spinning mills producing high-quality yarns. Visitors can also look forward to the new InLine card clothing series for the nonwovens sector.

In the Sewing exhibition area, the focus is on technical textiles – in particular the manufacture of car seats. The answer to the high demands of sewing car seats is the special application needle SAN® 5.2 from Groz-Beckert. The special geometry gives it sufficient stability. The double groove at the point improves thread guidance and leads to a uniform seam pattern, especially in multidirectional sewing processes. The scarf chamfer on both sides of the needle prevent skipped stitches and optimize loop formation. The wear protection is increased by the titanium nitride coating GEBEDUR. In addition, the quality management INH will be exhibited and the functions and contents of the customer portal will be presented.

Aim: Reducing returns and thus increasing sustainability in fashion e-commerce

Hohenstein, a global market leader in apparel sizing and fit development, has invested in AI technology startup, Sizekick. The collaboration will enable accurate decisions on apparel size, improving online shopping experiences, reducing returns and preventing the associated CO2 emissions.

Hohenstein’s 1.3 million Euro investment in the 2022 startup will drive growth in the Sizekick team and enable the 2023 launch of its smartphone app for online shoppers.  The technology will enable online shoppers to find the right clothing size in a few seconds via smartphone.

Sizekick puts an end to unnecessary size-related returns in fashion online retail. The Munich-based company uses artificial intelligence and computer vision technology to recommend the right clothing size to customers in partner web stores. With the help of the integrated Sizekick software and a smartphone, anyone can find the right size in a few seconds. Fashion and sports brands, but also multi-brand stores or marketplaces can integrate the "Sizekick Button" in their online store. Sizekick offers its solution as Software-as-a-Service (SaaS).

"The strategic partnership with Hohenstein enables us, as a new AI solution, to meet the high demands of the market right at the start and to take on the role of technology leader. Our artificial intelligence is already learning thanks to the comprehensive Hohenstein database of 3D body scans. This is an extremely big advantage for our AI," highlights Jake Lydon, CTO at Sizekick.

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts customers in the regions around the country’s three biggest cities of Karachi, Lahore and Faisalbad include all of the main players in the fields of home textiles and denim production, including Afroze, , Al Karam Artistic Milliners, Azgard-9, Crestex, , Gul Ahmed, Interloop, Liberty Mills, Lucky Textile Mills, Mustaqim, Naveena (NDL), Rajby Industries, Sapphire Finishing, Soorty, Style Textile and US Denim.

These companies rely on established Monforts technologies including Montex stentering equipment, Monfortex sanforizing units and Thermex dyeing ranges. The company’s Matex Eco Applicator minimum application system has also proved a big hit in recent years.

Monforts has also achieved considerable success in Pakistan with its Econtrol®* dyeing system  – an effective and established dyeing process. More than 40 Thermex continuous dyeing ranges have been installed in Pakistan in recent years and operator training on the Econtrol®* process by sophisticated technologists is an additional service.

The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step. Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

An immediate wash off is also unnecessary, allowing for flexible production planning. The process is suitable for pale to dark shades with very good fastness properties. Also waste water treatment is improved by this technology.

*Econtrol is a registered mark of Dystar Colours Distribution GmbH.

Recreational boaters now have an easy way to be more sustainable following the introduction of a new biocide-free (B-Free) fouling control range from AkzoNobel’s Yacht Coatings business.

The first product to be launched from the new B-Free range is B-Free Explore. It features a specially-developed, unique silicone polymer technology which produces an exceptionally smooth and slick hull – helping to reduce drag.

Fouling is controlled by preventing microorganisms such as barnacles, slime and algae from forming strong bonds with the hull of the boat. Any that do adhere can be simply wiped away by hand or water jet.

“We’ve developed high-performance technology which allows boaters to maintain a clean, smooth hull,” explains Simon Parker, Director of AkzoNobel’s Marine and Protective Coatings business. “It’s based on proven technology and exemplifies the restless spirit of innovation which has been the cornerstone of our International brand for more than 140 years.”

Adds Jemma Lampkin, Global Commercial Director for AkzoNobel’s Yacht Coatings business: “Boaters are becoming more aware of the impact they can have on the environment, but they still require technologies that deliver high-performance fouling control. B-Free Explore provides a stand-out solution for both of these challenges.”

Specially crafted for the leisure boat market, B-Free Explore is the culmination of a five-year development program. It can be applied to new hulls or directly to existing antifouling, without the need for the removal of the previous antifouling coating. This makes it simple for boaters to upgrade from their traditional coatings to the new technology.

The new product is also better for the marine ecosystem. Being biocide-free, it provides a smooth surface for improved hull efficiencies, which can lead to a reduced carbon footprint.

Currently being introduced in Northern Europe, B-Free Explore will be rolled out across Germany, the Netherlands, Norway and Sweden in January 2023.

Medline, a medical product distributor and manufacturer, together with Hologenix® launched a new line of CURAD® Performance Series® orthopedic products powered by CELLIANT® infrared technology.

CELLIANT, the flagship innovation of Hologenix, is a proprietary blend of natural minerals that allows textiles to convert body heat into infrared energy, returning it to the body and temporarily increasing local blood flow and cellular oxygenation. This has been clinically demonstrated to support recovery from physical activity and fatigue, increase endurance and stamina, and boost overall performance in healthy individuals, among other benefits.  

Trusted by athletes, CURAD is the Official Medical Supplier of the IRONMAN® U.S. Series. The new orthopedic products powered by CELLIANT infrared technology are the latest additions to the CURAD Performance Series collection and including different infrared supports designed for the ankle, knee, back, shoulder, as well as multipurpose use.

“This new CURAD Performance Series offering represents a major expansion of CELLIANT infrared (IR) bio-responsive textiles into the sports medicine field,” said Seth Casden, Hologenix Co-Founder and CEO. “We are honored to partner with Medline and look forward to future introductions.”

In addition to the inclusion of CELLIANT infrared technology, Medline has engineered the elastic supports to provide targeted compression for enhanced local circulation that helps reduce swelling, with a contoured fit that won’t slip or shift during normal activities with silicone grips that keep the product in place.

The removable hot/cold therapy supports provide adjustable compression and a gel compress that can be cooled or heated to further reduce swelling and discomfort.

As part of an ongoing investment programme ensuring it remains at the forefront of advanced technology for carpet production, West Yorkshire, UK-headquartered Phoenox Textiles has recently installed a new two-metre-wide shearing line supplied by BTMA member Sellers Textiles Engineers.

Phoenox, which has been family owned since its foundation in 1954, develops original creative flooring design concepts for retail brands. Its products are sold through high street outlets, department stores and volume retailers across Europe and North America, in addition to substantial online and catalogue-driven business. All told, the company’s 24-hour parcel service dispatches some 3.2 million orders every year.

Operating from two manufacturing sites, Phoenox manufactures an annual 1.7 million metres of flooring in the UK. Over a combined area of 1,700,000 square metres, the two plants are equipped for tufting, backcoating, cloth printing and finishing along with automated cutting, sewing and packing.

In addition to the Sellers shearing line, other recent investments for the UK operations have included three new advanced tufting machines and a high-speed Sellers backcoating line equipped to handle widths of up to two metres and coat at six metres per minute. Washable and dyeable foams and eco-friendly applications in different weights are applied for many product areas.

The company’s state-of-the-art Chromo jet printing process line is meanwhile the only one of its kind in the UK, with its 256 jets making possible designs in up eight colours per pattern. With sustainability very much at the forefront of the company’s approach, Phoenox recycles most of its paste and inks and uses organic options wherever possible, as well as recycled water.

“We operate a piece dye colour cloth programme and can dye nylon and cotton with weights of up to 500kg per load, working with direct, organic, vat and reactive dyes,” says Mosley. “We also offer computerised and weighed commission dyeing. Computerised automated cutting machines and photocell pattern recognition enable us to cut at high speed in most cloth densities. With finishing and sewing though, it’s all about the detail, and our team have years of experience and hand-finish our products on traditional high-speed machines.”

The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field, including at Phoenox. It’s one of a number of new innovations BTMA members are planning to showcase at next year’s ITMA exhibition in Milan.

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend has a sustainability strategy based on three pillars: empowering people, innovating solutions and operating without compromise. Ascend has committed to reducing its greenhouse gas emissions by 80% by 2030 and recently announced two new efforts to reduce the carbon footprint of its products.

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

The upgraded performance comes courtesy of the VUTEk FabriVU 340+ printer’s new, eight-printhead, CMYK x 2 array, along with new electronics for reliable and consistent premium-quality output of exhibit graphics, backlit graphics, retail fixture wraps, front lit graphics, block-out banners and fabric interior decor. A flag printing kit on the printer easily handles porous media in high-penetration applications by collecting inks without touching the rear side of the media.
 
As with all VUTEk FabriVU printers, it prints both transfer paper and direct-to-fabric.