From the Sector

Reset
9 results
28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

12.12.2023

Intertextile Shanghai Home Textiles in August 2024

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

from both inside and outside of Asia. Looking ahead, the stage will be set once again at the National Exhibition and Convention Center (Shanghai) next year, allowing exhibitors and buyers from the industry to match their trading needs onsite. Thanks to the resumption of global travel and the ongoing industry recovery, the next Autumn edition is slated to attract even more multinational fairgoers and diverse home and contract textile collections. The fair will return in 14 – 16 August 2024.

A recent study showed a significant rise in corporate travel in 2023, driven largely by the resurgence of live business events and the easing of restrictions following several turbulent years. Adding to this, the Chinese government has announced several measures in a bid to attract more international visitors, including a simplified visa application process as the latest initiative.
 
As one of the largest economies in the world, China is renowned for producing high-value products across the home textile spectrum, making Intertextile Shanghai Home Textiles an essential stop for global suppliers and buyers aiming to kick off the next business season.  
 
Emerging markets have become a significant focus for the industry in recent years. China's exports of home textiles to the ASEAN market amounted to around USD 2.09 billion in the first quarter of 2023, with an increase of 18% year-on-year; of which around USD 1.38 billion was exported in finished goods, seeing a rise of over 42% year-on-year[3]. With this growth in trade, buyers from fast growing emerging markets are expected to increasingly benefit from the Intertextile Shanghai Home Textiles platform to fulfil their sourcing needs.
 
The upcoming Autumn edition will continue to comprise a wide range of home textile products, including bedding & towelling, rugs, table & kitchen linen, upholstery & curtain fabrics, editors, home textile technologies and textile design.
 
Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

Drop in orders intake in third quarter 2023 Graphic ACIMIT
07.11.2023

Italian textile machinery: Drop in orders intake in third quarter 2023

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

ACIMIT President Marco Salvadè commented on the data, stating that, “The order index for the period from July to September 2023 confirms a contraction in collected orders that was already evident in previous quarters. What worries us above all is the situation with our domestic market, where the declining trend has persisted for seven consecutive terms. Due to this situation, which does not only concern the textile machinery industry, urgent measures are needed from Italian Government to strengthen the competitiveness of Italian manufacturers.”

As far as foreign markets are concerned, the orders index confirms an overall weakened global demand for textile machinery. Indeed, for the first half of 2023, Italian exports slowed in a variety of essential benchmark markets, such as Turkey, China and the United States.

“The global economic scenario remains negative, as consumers are facing a reduced purchasing power, with investments in the textile sector consequently also slowing down,” concludes Salvadè. “In less than a month, ITMA ASIA + CITME will be held from 19 to 23 November in Shanghai, primed as one of the world’s major trade fairs for the textile machinery industry, with the participation of roughly 60 Italian textile machinery manufacturers. We can expect some significant indications on the industry’s state from this event, which will be staged in one of the strategic markets for textile machinery demand.”

More information:
Italy ACIMIT
Source:

ACIMIT

01.11.2023

VDMA @ ITMA ASIA: Smart technologies for green textile production

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

Source:

VDMA e. V.
Textile Machinery

27.10.2023

ACIMIT: Italian machinery manufacturers at ITMA ASIA+CITME

A total of 59 Italian machinery manufacturers will be exhibiting at the upcoming ITMA ASIA+CITME, to be held from November 19 to 23 in Shanghai, as the event had been postponed for a year in the wake of the Covid-19 pandemic. Of these 59 manufacturers, 26 will be presenting technological innovations as part of the National Sector Groups, organized by ACIMIT and ITA – Italian Trade Agency. Occupying a surface area of around 2,000 square meters, Italy is among the major foreign exhibiting Countries at the event.

Asia is a major destination for Italy’s textile machinery manufacturers, with fully 38% of all Italian textile machinery exports during the first half of 2023 (amounting to roughly 338 million euros) directed towards Asian markets. China, in particular, is an absolutely important market for Italian companies: the first in Asia and the second worldwide behind Turkey in 2022. In the first six months of this year, Italian machinery sold in China reached a value of 81 million Euro.

A total of 59 Italian machinery manufacturers will be exhibiting at the upcoming ITMA ASIA+CITME, to be held from November 19 to 23 in Shanghai, as the event had been postponed for a year in the wake of the Covid-19 pandemic. Of these 59 manufacturers, 26 will be presenting technological innovations as part of the National Sector Groups, organized by ACIMIT and ITA – Italian Trade Agency. Occupying a surface area of around 2,000 square meters, Italy is among the major foreign exhibiting Countries at the event.

Asia is a major destination for Italy’s textile machinery manufacturers, with fully 38% of all Italian textile machinery exports during the first half of 2023 (amounting to roughly 338 million euros) directed towards Asian markets. China, in particular, is an absolutely important market for Italian companies: the first in Asia and the second worldwide behind Turkey in 2022. In the first six months of this year, Italian machinery sold in China reached a value of 81 million Euro.

“The general outlook for the Chinese market remains positive, although the demand for foreign machinery from local textile manufacturers has slowed somewhat for this first half of the year,” comments ACIMIT president Marco Salvadè. “Investments in the textile industry have never stopped, so there is no shortage of opportunities in China. I believe ITMA ASIA + CITME will confirm our expectations for a recovery in demand.”

Source:

ACIMIT

20.09.2023

TMAS Members at ITMA Asia + CITME 2023

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Yarn and sewing thread monitoring
With nearly 70 years of expertise in yarn sensor technology, Eltex of Sweden AB has been at the forefront of new product development. Its EYE and EyETM systems are capable of accurately and efficiently monitoring the movement and tension of more than 1,000 yarns simultaneously. These systems are suitable for various applications and fibre types, including warping, winding, multiaxial weaving and new material applications.

Eltex sewing tension monitors, such as the ETM422, have been well-received by customers. This device can monitor the tension of sewing threads in real time, effectively improving the quality and safety of sewn products. Particularly in China's rapidly growing automotive manufacturing sector, the ETM422 has seen widespread use to meet the industry’s escalating demands for product safety and quality.

Dyeing and finishing
“Digitalisation, automation and AI have become the key enablers for sustainable gains across the entire textile industry and so much has been achieved in the past few years, especially in terms of automation,” says TMAS secretary general Therese Premler-Andersson. “One area in which TMAS members are really making a difference right now, is in replacing water and energy-intensive technologies for the dyeing and finishing processes with new digital technologies.”

The TexCoat G4 non-contact spray technology for textile finishing and remoistening, for example, will be showcased in Shanghai by Baldwin. It not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to a customer’s requirements in terms of single and double-sided finishing applications. The TexCoat G4 can reduce water consumption by as much as 50% compared to traditional padding application processes.

Swiss Textile Machinery companies at ITMA Asia + CITME (c) 2021, Swissmem
Impression from ITMA Asia + CITME 2020
18.06.2021

Swiss Textile Machinery companies at ITMA Asia + CITME

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob
VDMA member companies at ITMA ASIA + CITME (c) ITMA
07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019 (c) Saurer AG
FusionTwister for staple fibre yarns
26.09.2019

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.