From the Sector

Reset
9 results
(c) Oerlikon
16.01.2020

Domotex 2020: Manmade Fibers shows BCF S8 with new CPC-T

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Market leader Oerlikon Neumag has its finger firmly on the pulse of their customers with the new Color Pop Compacting unit (CPC-T) for the BCF S8 carpet yarn plant, which is now available for the Polyamide 6 process. The new solution, which was on show from 10-13 January 2020 at the Domotex 2020 in Hannover, attracted great interest from many trade visitors.

Following the trend for multicolored carpets, BCF S8 sets new standards in regards to color separation. The plant, launched as a tricolor solution at last year’s ITMA in Barcelona, makes anything possible – from mélange to strongly separated. It promises carpet yarn producers even more flexible color mixing variants for product differentiation. The core component in this process, the Color Pop Compacting unit (CPC-T), offers more than 200,000 different color shades from three colors. The innovation, which has been filed for patent, is available for polypropylene and polyester polymers as well as for the polyamide 6 process.

Polyester, recycling polyester and fine titers are on trend
During numerous conversations with customers, Martin Rademacher, Head of Sales Oerlikon Neumag, observed a noticeable trend for polyester in the carpet industry even outside the USA. Sustainable solutions are equally sought after: “Our customers increasingly demand plants that can process recycled polyester,” explains Martin Rademacher.

The Manmade Fibers segment presented an additional solution by Oerlikon Barmag for polyester applications that need fine single filament titers from 0.5 dpf and high filament counts: Puffy, soft polyester filament yarns with BCF-similiar properties are produced on the basis of a POY and texturing process. Core components of the processes are the POY take-up unit WINGS HD as well as the new texturing machine eAFK Big-V.

Oerlikon (c) Oerlikon
Oerlikon
20.12.2019

Oerlikon: BCF S8 with CPC-T - color separation has never been so easy

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

Source:

Oerlikon

(c) Saurer Technologies GmbH & Co. KG
10.12.2019

Automation – a key theme for Saurer Twisting Solutions at Domotex 2020

Domotex, the world's largest trade fair for floor coverings, will take place in Hanover from 10 to 13 January 2020. Saurer Twisting Solutions is looking forward to welcoming customers and visitors at their Booth B35 in Hall 11.

Automation solutions made to measure for processing BCF yarns
At Domotex, Saurer Twisting Solutions will present customer-optimised solutions for process automation and product cost reduction. Automation of the material transport systems offers significant customer benefits. This is because these systems are individually adapted to the needs of clients and enable an optimum material flow throughout the entire twisting mill.

Easier and faster with new machine generation
Amongst other things, the new carpet yarn machine, the CarpetCabler CarpetTwister 1.10 and the automated guided vehicle PackDrive will be presented.

Domotex, the world's largest trade fair for floor coverings, will take place in Hanover from 10 to 13 January 2020. Saurer Twisting Solutions is looking forward to welcoming customers and visitors at their Booth B35 in Hall 11.

Automation solutions made to measure for processing BCF yarns
At Domotex, Saurer Twisting Solutions will present customer-optimised solutions for process automation and product cost reduction. Automation of the material transport systems offers significant customer benefits. This is because these systems are individually adapted to the needs of clients and enable an optimum material flow throughout the entire twisting mill.

Easier and faster with new machine generation
Amongst other things, the new carpet yarn machine, the CarpetCabler CarpetTwister 1.10 and the automated guided vehicle PackDrive will be presented.

More information:
Saurer Domotex 2020 Automation
Source:

Saurer Technologies GmbH & Co. KG

DOMOTEX 2020: Neues Leitthema ATMYSPHERE umfasst Sustainable Flooring (c) Betactive
Freudenberg
02.07.2019

DOMOTEX 2020: Neues Leitthema ATMYSPHERE umfasst Sustainable Flooring

  • Natürlichkeit und Nachhaltigkeit stehen verstärkt im Fokus gesundheitsorientierter Interior Design-Konzepte mit Bodenbelägen und Produkten von Ausstellern der DOMOTEX
  • Der Einsatz umweltschonender Lösungen, die auf der DOMOTEX vorgestellt werden, ist Zielsetzung wegweisender Referenzprojekte
  • DOMOTEX 2020 10. bis 13. Januar (Freitag bis Montag) Messegelände Hannover

Die führende Messe für Teppiche und Bodenbeläge DOMOTEX beleuchtet mit ihrem neuen Leitthema „ATMYSPHERE“ unterschiedliche Eigenschaften des Bodens, die zu individuellem Wohlbefinden in einem Interieur beitragen. Bei der kommenden Veranstaltung, die vom 10. bis 13. Januar in Hannover stattfindet, stehen unter anderem umweltfreundliche Materialien und Herstellungsverfahren sowie nachhaltige
Produkte im Mittelpunkt.

  • Natürlichkeit und Nachhaltigkeit stehen verstärkt im Fokus gesundheitsorientierter Interior Design-Konzepte mit Bodenbelägen und Produkten von Ausstellern der DOMOTEX
  • Der Einsatz umweltschonender Lösungen, die auf der DOMOTEX vorgestellt werden, ist Zielsetzung wegweisender Referenzprojekte
  • DOMOTEX 2020 10. bis 13. Januar (Freitag bis Montag) Messegelände Hannover

Die führende Messe für Teppiche und Bodenbeläge DOMOTEX beleuchtet mit ihrem neuen Leitthema „ATMYSPHERE“ unterschiedliche Eigenschaften des Bodens, die zu individuellem Wohlbefinden in einem Interieur beitragen. Bei der kommenden Veranstaltung, die vom 10. bis 13. Januar in Hannover stattfindet, stehen unter anderem umweltfreundliche Materialien und Herstellungsverfahren sowie nachhaltige
Produkte im Mittelpunkt.

Angeregt vom wachsenden Gesundheits- und Umweltbewusstsein entstehen derzeit viele relevante Interior Design-Projekte mit umweltfreundlichen Bodenbelägen und Verlegewerkstoffen, die für eine gesunde Raumatmosphäre sorgen. Bei innovativen Interieurs in Hotel, Bar und Restaurant bis hin zum Showroom, Büro und Messestand spielen nachhaltige Böden eine wichtige Rolle für das Gesamtkonzept, wie die
folgenden Beispiele mit Produkten von Ausstellern der DOMOTEX zeigen.

Der Flagshipstore der Deutschen Telekom am Münchner Marienplatz ist nach dem „Collector’s Lab“ Konzept des Unternehmens eingerichtet: Lieblingsstücke werden zu „emotionalen Inseln in einer wertigen Umgebung“ gruppiert, um eine persönliche Atmosphäre für den Kunden zu schaffen. Für die Bodengestaltung des Showrooms kamen zwei unterschiedliche elastische Böden des DOMOTEX-Ausstellers  Windmöller zum Einsatz. Applikationen in Weiß und Magenta auf einem Designboden in grauer Sichtbetonoptik leiten den Blick hin zu den Produktpräsentationen. Den wohnlich gestalteten Rahmen des Lounge- Bereichs und der Beratungszonen betont der Purline Bioboden in Verbindung mit holzverkleideten Wänden und bequemen Polstermöbeln. Purline ist ein Polyurethanboden auf Basis von ecuran. Der Verbundwerkstoff wird überwiegend aus nachwachsenden Rohstoffen wie Raps- oder Rizinusöl und Kreide hergestellt.  „Bewusstes Leben und Arbeiten steht mehr denn je im Fokus der Verbraucher“, erklärt Annika Windmöller, Gesellschafterin und Leiterin der Unternehmenskommunikation. „Ein aktuell sehr ausgeprägtes Umweltbewusstsein, die Forderung nach maximaler Nachhaltigkeit im täglichen Konsum sowie der Wunsch nach dem individuellen Wohlfühlen, sind maßgebliche Treiber unserer Gesellschaft.“ Der widerstandsfähige Purline Bioboden, so Windmöller, entspreche diesen Anforderungen in besonderem Maße. Gerda Karal, die für den Flagshipstore verantwortliche Teamleiterin Innenarchitektur des Kölner Architekturbüros Lepel & Lepel betont, dass es Ziel des Projekts war „Ökologie und Stil in ein perfektes Gleichgewicht zu bringen.“

Das Mama Shelter Hotel in Belgrad wurde von dem in São Paulo lebenden Interior Designer Jalil Amor eingerichtet, der zuvor in den Pariser Architekturbüros von Jean Nouvel und Philippe Starck arbeitete. Amor bezieht sich in seiner erzählerischen Gestaltung auf die Geschichte der serbischen Hauptstadt und ihre Jahrhunderte währende Zugehörigkeit zum osmanischen Reich. So stattete er den großzügigen  Restaurant- und Loungebereich in einem Mix aus modern interpretierten orientalischen Mustern und phantasievollen Pop-Art Elementen aus. Farbenfrohe runde Hocker der „Mafrash Home Décor Collection“ von Zollanvari wählte Amor zugleich als bequeme Sitzobjekte und Eyecatcher. Die Unikate der Collection entstehen aus einer Kombination von alten Taschen und Truhen, die von Ghashgha'i und Luri Nomaden gewebt wurden und handgewebten Arbeiten, die die Techniken von Kelim, Soumak und Zigorats kombinieren. Für die Flachgewebe mit der kunstvollen dreidimensionalen Struktur verwendet Zollanvari beste Hochlandwolle aus den iranischen Zagros-Bergen. In den Räumen des Mama Shelter Belgrade Hotels tragen die handgearbeiteten Teppichhocker zu einer entspannten und inspirierenden Atmosphäre bei. Auf diese Weise erfüllen die edlen Gewebe, aus denen die Hocker bestehen, einen neuen Zweck und werden nachhaltig genutzt.

Vinny Smith, Managing Director von Northern Backdrop Interior Design verwendete für die Gestaltung der Bar des „Greens“ Restaurant im irischen Ring of Kerry Golfclub Holzplanken der „Wave Collection“ aus dem Programm von Corà Parquet. Die organisch geformten Holzelemente sind aus europäischer Eiche gefertigt und haben eine grau glänzend lackierte und lebendig strukturierte Oberfläche. „Das Greens Restaurant bietet seinen Gästen einen herrlichen Blick auf die Kenmare Bay, den Atlantik und die atemberaubende Berglandschaft des County Kerry“, sagt Smith. „Ich wollte, dass alle Designdetails an die natürliche Umgebung dieses Ortes erinnern.“ Für die Verkleidung der Bar nutzte er wellenförmigen Eichenmodule, da diese  „Meereswellen und der Reflexion von Licht auf dem Wasser“ ähneln. „Form, Farben  und Struktur der Verkleidung verleihen der eher kleinen Bar eine große Wirkung und machen sie zu einem Schwerpunkt innerhalb des Interior Designs.“ Corà Parquet verwendet hochwertige Hölzer, die sorgfältig verarbeitet und für eine lange Lebensdauer ausgerichtet sind. Sie sind FSC-zertifiziert und werden nach hohen ökologischen und sozialen Standards produziert.

Vielaris Art Parquet aus Litauen restauriert Böden in historischen Gebäuden. Mit dem Knowhow aus diesen Projekten werden auch exklusive Räumlichkeiten mit neuen Parkettböden ausgestattet. Im Büro eines Immobilien-Investors im Zentrum von Paris verlegte das Unternehmen den „Trio“ Holzboden aus Birkensperrholz mit einer Oberschicht aus Eiche. Dieser nachhaltige Bodenbelag wird aus den geometrischen Formen Dreieck, Diamant und Trapez zu einem ausdrucksvollen und eleganten Muster zusammengesetzt. Einzeln über die Fläche verteilte Dreiecksformen aus Messing unterstreichen den einzigartigen Look des Naturholzbodens. Das Unternehmen verwendet bei seinen Projekten den nachwachsenden Rohstoff Holz und verarbeitet ihn in höchster handwerklicher Präzision, je nach Auftrag auch mit Intarsien sowie Einlegearbeiten aus Metall. Das Besondere an den zweischichtigen Parkettplatten von Vielaris ist, dass alle Details über die gesamte Plattenlage hinweg miteinander verbunden sind. Dieser traditionelle Herstellungsprozess sorgt für eine lange Lebensdauer des edlen Bodens.

Der Messestand von Freudenberg auf der DOMOTEX 2019 sorgte für viel Aufsehen. Besucher konnten in eine scheinbar natürliche Umgebung eintauchen. Der Teppichbelag des Standes war mit Freudenberg-Tuft-Trägern ausgestattet und zeigte täuschend echt wirkende Moos- und Waldmotive, die mit Hilfe hochwertiger digitaler Drucktechnologie entstanden. Nachhaltigkeit gehört zum Selbstverständnis von  Freudenberg. Praktisch umgesetzt wird sie in zahlreichen Projekten zur Reduzierung des Energie-, Wasser- und Rohstoffverbrauchs. „Wir verbessern ständig die Umweltbilanz unserer getufteten Teppichrücken, ohne die Leistung zu beeinträchtigen,“ sagt John McNabb, Freudenberg Performance Materials’ Chief Technical Officer. Dies betreffe die Wiederverwendung der eigenen Abfälle, die Erhöhung des zertifizierten Recyclinganteils und die Vermeidung von chemischen Bindemitteln. „Gleichzeitig verbessern wir den ‚Handabdruck‘ unserer Kunden, indem wir 100% recycelbare Einkomponenten-Tuftuntergründe anbieten.“ So diente der Messestand unter dem Motto „Sustainable Backings“ auch dem kommunikativen Ziel, mit Kunden über den gemeinsamen Aufbau einer nachhaltigen Zukunft ins Gespräch zu kommen.

Das frisch renovierte Restaurant „Panorama 2962“ auf der Gipfelstation der Zugspitze bietet seinen Besuchern eine einzigartige Aussicht auf das Voralpenland. Dort hat die Firma Raumausstattung Kraus aus Grainau auf einer Fläche von rund 800 m² Massivholzdielen mit Produkten von Uzin Utz umweltfreundlich verlegt. Ein Teil des Bodens war mit Fliesen versehen, auf der Restfläche befand sich ein Schnellzementestrich. Um den Untergrund vorzubereiten, mussten zunächst gelockerte Fliesen entfernt und ein Diamantschliff durchführt werden. Auf den behandelten Boden trug das Verlegeteam eine geruchsarme Epoxidharzgrundierung auf, die für nachhaltiges Bauen geeignet ist. Damit wurde die Massivdiele gegen Einwirkungen aus der alten Bestandskonstruktion geschützt und zugleich deren teils labile Stellen verfestigt. Um Spannungen der Massivdiele vom Untergrund zu entkoppeln, verwendete Bernhard Kraus ein emissionsarmes Multimoll Vlies. Anschließend konnten die 20 mm starken Eichen- Massivdielen auf dem Renovierflies mit einem Parkettklebstoff verklebt werden, der ohne weichmachende Inhaltstoffe auskommt und das Umweltgütezeichen „Blauer Engel“ trägt. Diese Vorgehensweise sorgt für eine gesunde Raumatmosphäre ohne Ausdünstung von Lösungsmitteln. Nun unterstreicht der neue Bodenbelag die natürliche und einladende Ausstattung des Restaurants.

Neueste Entwicklungen im Bereich nachhaltig und natürlich gestaltete Böden können Besucher der DOMOTEX vom 10. bis 13. Januar 2020 in Hannover sehen und spüren. Entsprechend dem neuen Leitthema ATMYSPHERE stellen innovative Hersteller dort ihr vielfältiges Angebotsportfolio vor.

Oerlikon Neumag BCF S8 (c) Oerlikon Textile GmbH & Co. KG
Oerlikon Neumag BCF S8
11.01.2019

Oerlikon Neumag presents world innovation at the DOMOTEX

  • Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide.

  • Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide. At the ITMA ASIA 2018, the Oerlikon Manmade Fibers segment had already announced that it would be presenting revolutionary solutions in 2019 – both in hardware and software. And the DOMOTEX marks only the start.

According to manufacturer information, the new BCF S8 is the most efficient Oerlikon Neumag BCF system of all times. “We have succeeded in achieving a new level of greater productivity and even broader product diversity. These allow our clientèle to better cater to changing market requirements and achieve a competitive edge in tough market conditions”, explains Martin Rademacher, Vice President Sales Oerlikon Neumag. As a pre-taste, the machine specialists from Neumünster are serving up performance figures and results from comprehensive trials conducted at their own BCF technology center as well as from two pilot systems which have been tried and tested within the market for months now.

BCF S8 performance in numbers
With up to 700 potential filaments per yarn end, the BCF S8 is raising the benchmark considerably compared to the Oerlikon Neumag S+ BCF system (400 filaments) that has dominated the global market to date. Oerlikon Neumag guarantees fine titers of up to 2.5 dpf. Furthermore, the process speed is higher than ever before – 3,700 m/min (winder speed). This permits throughputs of up to 15 percent greater compared to predecessor technologies. Overall, system efficiency is 99 percent – almost unbeatable. True to the Oerlikon Segments Manmade Fibers segment e-save philosophy, energy savings of up to 5 percent per kilogram of yarn are achievable.

BCF S8 innovations – from straight yarn paths to large cooling drums

This comprehensive progress has been achieved with numerous smart innovations. To this end, one key element above all has been optimized. The yarn path from the spinning system to the new, large cooling drum has now been almost completely straightened. This yarn path, unique to the BCF market to date, ensures that the individual filaments are subjected to minimum friction, hence once again considerably reducing yarn breaks and optimizing the overall production process. Especially noteworthy here are the, for the first time, straight yarn inlet in the texturing head – guaranteeing superior yarn quality.

And the considerably reduced distance between the heating godet duo and the texturing head also has a positive impact on the texturing process. It ensures a more even twist to the yarn and reduces the compressed air consumption. Furthermore, the texturing chambers can be removed individually, which additionally shortens servicing times. The now closed units also provide the best possible protection for the texturing jets and lamellar chambers.

The 800-mm diameter cooling drum optimally and gently cools the filaments. And this has a positive influence on the yarn quality. The new cooling drum is now equipped with a V groove for all polymers (PET, PA6 and PP) as standard.

The RoTac3 tangling unit, already established within the market, once again reduces the compressed air consumption by around 50%, while the newly-developed Witras III-37 winder achieves production process speeds of 3,700 m/min.

First intuitively-operable human-machine interface (HMI)
The new BCF S8 is the first Oerlikon Manmade Fibers segment system equipped with the innovative human-machine interface (HMI) for intelligent controlling and monitoring. In this case, the interface between man and machine has been oriented on the daily requirements of users in BCF production. With its new ‘look and feel’, it supports intuitive operation and offers direct access to important information as well as actual and target values at each take-up position by means of a touch screen. A completely new ‘alarm philosophy’ also simplifies troubleshooting and malfunction analysis. “This smart HMI system is a logical step in the digitalization of our products”, explains Dr. Friedrich Lennemann, Vice President R&D Oerlikon Neumag.

More information:
Oerlikon Neumag
Source:

Oerlikon Textile GmbH & Co. KG

UltraBond, the cost-effective solution for fully recyclable, latex-free, sustainable carpets (c) Beaulieu Fibres International
10.01.2019

Beaulieu Fibres International: Cost-effective solution for fully recyclable, latex-free, sustainable carpets

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

More information:
Beaulieu Fibres International
Source:

EMG

Success Stories: Aussteller der DOMOTEX ermöglichen innovative Raumgestaltung ©Galleria Battilossi und Gebrueder Thonet Vienna
Battilossi
26.09.2018

Success Stories: Aussteller der DOMOTEX ermöglichen innovative Raumgestaltung

Die hohe Zahl an Anmeldungen für die DOMOTEX 2019 weist schon jetzt auf eine erfolgreiche Messe vom 11. – 14. Januar in Hannover hin. Viele der Aussteller sind bereits dabei, den Messeauftritt detailliert vorzubereiten, um ihre Produktneuheiten optimal zu präsentieren – die Vorbereitungen laufen auf Hochtouren. Das neue Leitthema „CREATE’N’CONNECT“ der DOMOTEX rückt den Megatrend der Konnektivität in den Fokus. Für den Boden mit seinen vielseitigen gestalterischen Möglichkeiten spielt der Trend der „Vernetzung“ eine besondere Rolle. Er bildet die Basis der Räume, in denen wir leben und arbeiten.

Wichtige Impulse und Inspirationen für den Boden der Zukunft bietet die Sonderfläche „Framing Trends“ in Halle 9. Hier können Aussteller und Unternehmen der Fußbodenbranche ihre kreativen Ideen anhand des aktuellen Leitthemas darstellen. Durch ihre inspirierende Wirkung ziehen die „Framing Trends“ Hersteller und Besucher aus aller Welt an. Als globale kommunikative Plattform ermöglicht es ihnen die DOMOTEX, sich im Sinne von „CREATE’N’CONNEXT“ mit Ausstellern zu vernetzen, woraus vielfältige Kooperationen entstehen.

Die hohe Zahl an Anmeldungen für die DOMOTEX 2019 weist schon jetzt auf eine erfolgreiche Messe vom 11. – 14. Januar in Hannover hin. Viele der Aussteller sind bereits dabei, den Messeauftritt detailliert vorzubereiten, um ihre Produktneuheiten optimal zu präsentieren – die Vorbereitungen laufen auf Hochtouren. Das neue Leitthema „CREATE’N’CONNECT“ der DOMOTEX rückt den Megatrend der Konnektivität in den Fokus. Für den Boden mit seinen vielseitigen gestalterischen Möglichkeiten spielt der Trend der „Vernetzung“ eine besondere Rolle. Er bildet die Basis der Räume, in denen wir leben und arbeiten.

Wichtige Impulse und Inspirationen für den Boden der Zukunft bietet die Sonderfläche „Framing Trends“ in Halle 9. Hier können Aussteller und Unternehmen der Fußbodenbranche ihre kreativen Ideen anhand des aktuellen Leitthemas darstellen. Durch ihre inspirierende Wirkung ziehen die „Framing Trends“ Hersteller und Besucher aus aller Welt an. Als globale kommunikative Plattform ermöglicht es ihnen die DOMOTEX, sich im Sinne von „CREATE’N’CONNEXT“ mit Ausstellern zu vernetzen, woraus vielfältige Kooperationen entstehen.

Mit ihren innovativen Produkten sind Aussteller der DOMOTEX 2019 bei Interior Design-Projekten in aller Welt präsent. Internationale Architekten und Innenarchitekten setzen ihre Teppiche, Fußböden und Verlegetechniken gezielt ein, um kreativ gestaltete Räume zu schaffen, bei denen der Boden zum verbindenden Element des Gesamtkonzepts wird.

Vom historischen Ballroom in Chicago über einen Bookstore mit Café in Oslo bis zum neuen Allianz Stadion in Wien: Architekten, Interior Designer und Planer binden die Bodengestaltung in ihr kreatives Konzept ein, um dem Interieur den letzten Schliff zu verleihen, der ein harmonisches Ganzes bewirkt. Teppichfliesen, handgefertigte Teppiche, Holzfußböden und Verlegewerkstoffe der Aussteller Oriental Weavers, Galleria Battilossi, Chapel Parket sowie Classen, Fletco und Uzin Utz, die auf der DOMOTEX ihre Premiere hatten, sind ein wichtiger Bestandteil dieser trendorientierten Rauminszenierungen.

Der Boden als verbindendes Element des Interior-Konzepts

Das Blackstone Hotel wurde 1910 in der Innenstadt von Chicago erbaut. Zur Renovierung der Räume entwarf The Gettys Group ein neues Interior Design, das sich harmonisch mit den Wänden und Decken im historistischen Stil verbindet. Für den Crystal Ballroom, besonders beliebt als Location für Hochzeiten, wurden Oriental Weavers aus Ägypten mit der Sonderanfertigung eines überdimensionalen Axminster Teppichs beauftragt. Der Teppich besteht aus 80 Prozent Wolle mit einem Polyamidanteil von 20 Prozent, um ihn strapazierfähig zu machen. Das symmetrische Muster erinnert an riesige Wellen, die auf die direkte Nähe des Hotels zum Lake Michigan anspielen und trägt zu einem einzigartigen Raumerlebnis bei. Oriental Weavers werden auch 2019 auf der DOMOTEX hervorragende Kreationen aus dem Bereich  maschinengewebte Teppiche ausstellen.

Gebrüder Thonet Vienna hat seinen Hauptsitz nach Turin in ein ehemaliges Fabrikgebäude verlegt. In der Mitte des neuen Showrooms werden Klassiker des Möbelherstellers in hohen Regalbauten gezeigt, an den Seiten sind zeitgenössische Modelle zu sehen, die in Kooperation mit renommierten Designern entstanden. Für die Gestaltung des repräsentativen Empfangsbereichs wählte CEO Riccardo Pigati handgefertigte Wollteppiche aus dem Programm von Galleria Battilossi, deren innovative „Pattern Mix Collection“ auf der DOMOTEX einen Carpet Design Award gewann. Die Gelb- und Beigetöne des Unikats aus dem „Color Jam Project“ sowie eines Vintage Berberteppichs aus der Region Beni Ourain verbinden sich mit Farbakzenten der Exponate zu einem harmonischen Gesamtbild aus alt und neu. „Qualität und handwerkliche Fertigkeiten, Originalität und Authentizität“ seien Werte, die sein Unternehmen mit Galleria Battilossi teile, sagt Pigati. „Aufgrund dieser Verbundenheit haben wir uns dafür entschieden, unseren
Showroom mit den außergewöhnlichen Teppichen aufzuwerten“.

In Oslo teilen sich eine Boutique-Abteilung für Damenmode und ein angegliederter Buchladen mit Café im zweiten Stock des YME Multistores einen gemeinsamen Bodenbelag. Bei der Gestaltung der 330 qm großen Bodenfläche entschied sich das Designteam der YME Studios gemeinsam mit den Innenarchitekten des Osloer Büros Snøhetta für die „Hermitage Herringbone“ Serie von Chapel Parket. Den lebendigen Holzboden in drei konstrastierenden Farbtönen wählten sie aufgrund seiner leicht rauen Oberfläche und der ausdrucksvollen Farbigkeit aus. Das Schwarz der Parkettelemente verbindet sich mit den Fensterrahmen und den Bücherregalen, die warmen Holztöne harmonieren mit dem Vintage-Sofa und grob belassenen Holzbalken. Wie in den vergangenen Jahren ist Chapel Parket mit seinen charaktervollen Holzböden auch Aussteller auf der DOMOTEX 2019.

Direkt an der Mosel, in einem denkmalgeschützten Gebäude in Cochem, befindet sich das Boutique Hotel Villa Vie. Inhaber Theodor Steidel hat die Gästezimmer selbst geplant und eingerichtet, jedes hat seinen individuellen Charme. Antike Möbelstücke kombiniert er mit aktuellem Design und Kunstgegenständen. Zur Abrundung der Interieurs entschied sich der Hotelier für die robusten und PVC-freien Designböden aus der „SONO Skyline“ Kollektion von Classen aufgrund ihrer Langlebigkeit, dem geräuscharmen Auftritt und der natürlich wirkenden Holzdekore mit leicht glänzender Optik. „Der Boden passt sich dem Mix aus wertvollen Antiquitäten und modernen hochwertigen Möbelstücken ausgezeichnet 4 an,“ erklärt Theodor Steidel. Zudem nähme er sich wohlwollend zurück und besteche doch durch seine Struktur und Haptik. Bei der Ausstattung der Räume habe Steidel nach einem „hochwertigen Produkt mit modernem Design gesucht, das bestens gegen Feuchtigkeit geschützt ist.“ Auch im Badbereich hat er sich deshalb für einen Boden aus der „SONO“ Kollektion entschieden, die auf der DOMOTEX als Messeneuheit vorgestellt wurde.

Der Softwarehersteller Playtech hat in Tallin neue Büroräume auf einer Gesamtfläche von 3200 qm bezogen. Jan Skolimowski vom Architekturbüro KAMP legt in seinem Designkonzept besonderen Wert auf die Bodengestaltung. Als Leitidee für die Innenräume nutzte Skolimowski das Dreieck des „Play“- Buttons, ein grafisches Element des blauen Playtech Logos. „Deshalb habe ich nach einem passenden Teppichboden für den Objektbereich gesucht, dessen Dekore und Farbpalette zum Logo passen. Die Kollektion Sebastian Wrong by Fletco  war meine erste und einzige Wahl.“ Im Zentrum der Räume ließ der Architekt dunklere Töne der Fliesenkollektion verlegen, zu den Außenwänden hin werden die Nuancen heller. Dadurch wirken die Büros noch großzügiger. Vom Boden ausgehend nimmt sein Interior-Konzept Dreiecksformen und Blautöne auf, beispielsweise bei Sitzkissen auf Holzpodesten, dem Empfangstresen oder dekorativen Wandelementen. So vernetzen sich die Böden mit Möbeln und Wänden. Der Londoner Designer Sebastian Wrong präsentierte seine wandlungsfähige Kollektion für den Hersteller Fletco erstmals auf der DOMOTEX.

In einer Bauzeit von nur 17 Monaten wurden im Allianz Stadion des SK Rapid Wien 10.000 qm Boden fertiggestellt und 8.000 qm Vinylbelag verlegt. Maßgeblich für das Gelingen des Bauprojekts war das richtige Timing für die Untergrundvorbereitung mit Verlegewerkstoffen von Uzin Utz. In der Regel messen Estrichfelder bis zu 40 qm, auf dieser Baustelle kamen bis zu 300 qm große Felder zustande. Denn der Boden der Business-Lounge-Bereiche auf zwei Ebenen sollte möglichst fugenfrei sein, um Vinyl- Bahnen großflächig verlegen zu können und die einheitliche ästhetische Wirkung zu erreichen, die sich Architekt Guido Pfaffhausen wünschte. Deshalb wurde über alle Fugen zwischen den Betonbauteilen das Glasvlies RR 203 von Uzin Utz als Rissbrücke verlegt und mit der standfesten Spachtelmasse NC 182 dünn eingespachtelt sowie 5 verschlossen. Durch diese Vorgehensweise musste der Estrich weder eingeschnitten noch verdübelt werden, ein wichtiger Aspekt des Interior-Konzepts. Nach dem Schleifen und Grundieren trugen die Bodenleger die selbstverlaufende Ausgleichsmasse Uzin NC 160 in zwei bis drei mm Stärke im Rakelverfahren auf. Sie ist spannungsarm, sehr fließfähig und bildet völlig ebene  Untergründe. Durch die besonders glatte Oberfläche und die hohe Saugfähigkeit reduziert sich zudem die benötigte Klebstoffmenge: Der Kleber trocknet schneller und weist weniger Resteindruck bei Belastung auf. Nach einem Tag war die Spachtelung begehbar, dann konnte geschliffen, die Vinylbahnen zugeschnitten und verklebt werden.

Auf beiden Ebenen der Business- Lounge, in Fluren, Gängen, Konferenzzimmern und VIP-Logen sind Vinyl-Objektbeläge von Forbo Flooring in Holz- und Beton-Dekor in verschiedenen Farbabstufungen verlegt. Die moderne Betonoptik der Vinyl-Objektbeläge sorgt im großen Loungebereich für ein modernes Erscheinungsbild, authentische Holzdessins setzen harmonische Akzente in den VIP-Logen. Die Beläge wurden mit dem emissionsarmen Universalklebstoff Uzin KE 16 formstabil verlegt, um die Anforderungen an Optik und Funktionalität im Stadion zu erfüllen.

Für die Bodengestaltung ist der Trend der „Vernetzung“ von großer Bedeutung. Der Boden ist Designelement, er inspiriert uns, gibt uns Orientierung – und verbindet uns miteinander. Auf die Bodenbranche trifft dies im besonderen Maße zu, da er die Basis für alles bildet. Die DOMOTEX ist Weltleitmesse sowie die größte Innovations- und Trendplattform der Branche. Als jährliches Highlight der Szene regt die Messe Aussteller und Besucher mit ihrer lebendigen Atmosphäre zu kreativer Zusammenarbeit an.

Oerlikon Neumag at Domotex Asia 2018 Oerlikon Neumag’s Sytec One guaranties an economical BCF Carpet Yarn production for challenging processes.
13.02.2018

Oerlikon Neumag at Domotex Asia 2018

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

The market for the production of carpet yarn is increasingly evolving towards more demanding processes. However, beyond commodity products, standard plants can no longer fully exploit their advantages. From 20th to 22nd March 2018, Oerlikon Neumag will be presenting an economical alternative in Shanghai in hall W3, booth F03 at the Domotex asia/Chinafloor, the leading floor covering trade fair in the Asia-Pacific region: the BCF plant Sytec One with single-end technology.

If the requirements for the production of BCF yarns increase, for example, from recycled polyester or fine filaments, then this can also lead to higher breakage rates. Highly standardised production plants must then often strike compromises with regard to throughput, quality or cost-efficiency. In such cases, the Sytec One offers a good solution instead of the mostly three-end technology plants for standard processes.

Single-end technology with 98% productivity

This BCF plant works with only one yarn (end) per position, making it ideal for demanding production processes. The reason: when a yarn break occurs only one yarn tears, all other yarns continue to run. This not only simplifies troubleshooting, it also reduces the re-threading time. In addition, less waste is produced. As a result, the productivity of the Sytec One is still over 98% for ten breakages a day, while a plant with three-end technology only reaches around 92%.

Faster processes due to a straight yarn path

In addition, the absolutely straight yarn path of the Sytec One enables significantly higher process speeds of up to 15% in spinning and texturing processes compared to multi-end technologies. Higher total titers of up to 6,000 dtex can also be produced without any problems. The gentle yarn guidance also ensures minimum friction on the individual filaments. This means less yarn breaks and a more stable process.

Optimised key component: spinning pack

Last but not least, the engineers at Oerlikon Neumag have developed a new design for the spinning pack. This central component of every BCF machine significantly influences the yarn quality. The corresponding solution for the Sytec One optimises the polymer flow in the spin pack, thus reducing the polymer dwell time. This leads to shorter product and colour change times and increases the plant efficiency. In addition, the spinning packs were widened so that yarns with up to 500 filaments can now be produced.

The product mix is decisive

In view of these advantages, the single-end Sytec One is recommended for processes with high breakage rates, fine filaments, frequent colour changes or in general when demanding processes take up an increasing share in the business. "The product mix is decisive for the choice of technology," sums up Alfred Czaplinski, Sales Manager BCF at Oerlikon Neumag. "We are happy to advise on the optimal solution and offer both single-end and three-end plant technologies." 

Good business at the Domotex Hanover, Germany

In the run-up to the trade fair, the Domotex Hanover in mid-January was already proving to be a promising harbinger. With four lively trade fair days and contract conclusions in the lower double-digit million euro range, mainly from the European and Asian markets, the order intake for Oerlikon Neumag was very good.

More information:
Oerlikon Neumag Domotex
Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon Neumag at Domotex 2018 ©Oerlikon Neumag
The Sytec One from Oerlikon Neumag guarantees cost-efficient BCF yarn production in demanding processes.
11.01.2018

Oerlikon Neumag at Domotex 2018

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

Cost-efficient BCF yarn production for demanding processes with Sytec One from Oerlikon Neumag

Cost-efficient production of carpet yarns beyond commodity products can constitute a challenge. Highly standardized production systems must strike compromises with regard to throughput, quality or cost-efficiency. At the Domotex 2018, the world's largest trade fair for floor coverings, Oerlikon Neumag will present the Sytec One solution for demanding BCF processes.

The Sytec One is a BCF plant with only one end per position. Due to this single-end characteristic, it is particularly well suited for demanding production processes, such as recycled polyester or fine filaments. The reason: In the event of a yarn break, only one end breaks. All the other positions are not affected and continue to run. As a result, this plant has a higher efficiency compared with a multi-end technology plant. For example, with ten breaks a day, the efficiency of the Sytec One is still over 98%, while a threeend technology achieves only 92% efficiency.

Higher productivity due to the straight yarn path

The machine concept of the Sytec One with its absolutely straight yarn path in spinning and texturing also enables significantly higher process speeds compared to multi-end technologies. This results in a speed increase of up to 15%. In addition to standard processes, more demanding processes with higher break rates play an increasingly important role. "The product mix is critical to the choice of technology," said Martin Rademacher, vice president of sales Oerlikon Neumag. "We are in the comfortable position of being able to offer our customers both a single-end and a three-end technology."

More information:
Oerlikon Neumag Heimtextilien
Source:

©Oerlikon Marketing, Corporate Communications & Public Affairs