From the Sector

Reset
2 results
(c) EREMA
Manfred Hackl, CEO EREMA Group and Markus Huber-Lindinger, Managing Director EREMA, open the EREMA Discovery Day 2023
09.06.2023

EREMA Discovery Day as meeting place for plastics and recycling industry

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

More information:
EREMA plastics Recycling
Source:

EREMA Group

Virtual RISE Conference Highlights (c) INDA
RISE 2021 Award Winner Canopy
06.10.2021

Virtual RISE Conference Highlights

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Next-Gen Technologies for Nonwovens/Engineered Materials
  • Canopy Respirator from Canopy Wins Innovation Award

145 professionals in product development, material science, and new technologies convened for the 11th conference edition of RISE®—Research, Innovation & Science for Engineered Fabrics, held virtually, Sept. 28-30. The event was co-organized by INDA, the Association of the Nonwoven Fabrics Industry, The Nonwovens Institute, and North Carolina State University.

The program focused on Nonwoven Material Science Developments, Sustainability, Increasing Circularity, Promising Innovations, Process Innovations, Material Innovations, Government/NGO Challenges to Single-Use Plastics, Machine-Assisted-Learning Development of Biopolymers, and Market Intelligence and Economic Insights.

Participants praised the high-quality program content, in-depth round table discussions, networking and Q&A’s where participants ask expert speakers questions pertaining to their focused presentations.

Highlights among the 26 presentations included

  • Sustainable Solutions for our Plastic Planet Predicament, by Marc A. Hillmyer, Ph.D., McKnight Presidential Endowed Chair, University of Minnesota;
  • Closed-Loop Recycling Pilot of Single-Use Face Masks by Peter Dziezok, Ph.D., Director of Open Innovation, Proctor & Gamble;
  • Innovating a Sustainable Future for Nonwovens: A European Perspective, by Matt Tipper, Ph.D., CEO, Nonwovens Innovation & Research Institute (NIRI);
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology, by Fabio Zampollo, CEO and Founder of Teknoweb Materials; 
  • Guiding Environmentally Sustainable Innovations – From Reactive to Proactive Life Cycle Management, by Valentina Prado, Ph.D., Senior Sustainability Analyst, EarthShift Global LLC;  
  • High-Loft, Ultra-Soft Hygiene Solutions, Paul E. Rollin, Ph.D., Senior Principal Scientist – Global Hygiene, Propylene-Vistamaxx-Adhesion (PVA) Global Technology, ExxonMobil Chemical Company;
  • Canadian Plastic Policy Update, by Karyn M. Schmidt, Senior Director, Regulatory & Technical Affairs, American Chemistry Council (ACC).

Other highlights included the announcement of Canopy Respirator as the winner of this year’s RISE® Innovation Award winner. The annual award recognizes innovation in areas within and on the periphery of the nonwovens industry which use advanced science and engineering principles to develop unique or intricate solutions to problems and advance the usage of nonwovens.

RISE® Innovation Award Winner
The RISE® Innovation Award was presented to Canopy for their Canopy Respirator. The productis an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.

Source:

INDA, Association of the Nonwoven Fabrics Industry