From the Sector

Reset
6 results
(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

Kornit Digital (c) Kornit Digital
09.10.2020

Kornit Digital Joins the 2020 Innovate Textile & Apparel Virtual Trade Show

Online exhibit to feature complete portfolio of systems for sustainable production on demand, end-to-end workflow solutions, expert demonstration and consultation

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, is pleased to join the 2020 Innovate Textile & Apparel Virtual Trade Show, WTiN’s annual global exhibition highlighting the true innovators in technology, production, and value chain leadership for the textile and apparel industry.

For this year’s event, which is free to attend, Kornit will be exhibiting its latest capabilities for digital direct-to-garment and roll-to-roll production, including the only single-step process for delivering durable, retail-quality impressions on multiple fabrics within minutes. Visitors will find opportunities to learn more about:

Online exhibit to feature complete portfolio of systems for sustainable production on demand, end-to-end workflow solutions, expert demonstration and consultation

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, is pleased to join the 2020 Innovate Textile & Apparel Virtual Trade Show, WTiN’s annual global exhibition highlighting the true innovators in technology, production, and value chain leadership for the textile and apparel industry.

For this year’s event, which is free to attend, Kornit will be exhibiting its latest capabilities for digital direct-to-garment and roll-to-roll production, including the only single-step process for delivering durable, retail-quality impressions on multiple fabrics within minutes. Visitors will find opportunities to learn more about:

  • Kornit’s portfolio of industry-leading DTG systems, offering brands and fulfillers pushbutton efficiency in any quantity, to eliminate inventory risk and waste.
  • Kornit Presto, foundation of any microfactory production concept, for consolidating operations and minimizing supply chain risk.
  • Kornit’s new Softener solution, which enables photorealistic detail combined with handfeel meeting the most rigorous demands of high fashion and home décor.
  • Kornit’s range of available pallets, empowering brands and fulfillers to expand their catalog and offer customers any applications they demand, including baby and children’s apparel, zipper hoodies, handbags, and the industry’s first DTG solution for custom neck tags.
  • Kornit’s acquisition of Custom Gateway, which promises end-to-end production efficiency, for building or enhancing online stores, ensuring visibility and control across multiple production sites, optimizing the production floor, and getting products out the door quickly, meeting the speed and logistics challenges of the e-commerce age.

In addition to sharing diverse customer testimonials, Kornit will be hosting live consultations with system experts, to answer all questions and present Kornit’s value proposition for ongoing business needs. The company will also be leading a seminar presentation during the event.

“While we certainly miss the face-to-face engagement traditional trade shows offer, the upside of these web-based expositions is that there’s no limit to the systems, applications, and personnel Kornit can and will leverage to present its case for mastering the e-commerce age with efficient, sustainable digital capabilities,” said Chris Govier, Kornit Digital Managing Director—EMEA. “With our expanding suite of workflow and visibility software, Kornit gives manufacturers large and small the ability to scale their end-to-end business, while eliminating overproduction risks and establishing responsible production practices. These systems are critical to surviving the retail apocalypse and COVID-like disruptions, and event attendees will see why.”

Source:

PR4U/Kornit Digital

EuroShop 2020: High Degree of Internationality Photo: Messe Düsseldorf / ctillmann
EuroShop 2020: High Degree of Internationality
20.02.2020

EuroShop 2020: High Degree of Internationality confirms Global Leading Function for Retail

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Retailers invest in emotionalisation and digitalisation +++ Top theme: linking online with offline shopping +++ Focus on sustainability +++ Accompanying Stages and Specials received very well

The World’s No.1 Retail Trade Fair, EuroShop 2020, drew to a close on Thursday (20 February 2020) after five successful days in Düsseldorf: 2,300 exhibitors from 57 nations reported of very good leads and concluded business deals. Furthermore, lively follow-up business is expected. 94,000 visitors travelled to the Rhine to gather information on the line-up of products, trends and concepts for retailers and their partners featured in 16 exhibition halls.  

“We are delighted that EuroShop once again successfully proved to be the most relevant platform for the global retail community when it comes to trends, inspirations and networking. Our exhibitors deserve the highest praise for their loyalty. With their innovative power they again proved the major attraction for an entire industry,” said Erhard Wienkamp, Managing Director at Messe Düsseldorf, voicing his great satisfaction with EuroShop 2020 results.

Exhibitors especially applauded the high international attendance at EuroShop. 70% of the EuroShop audience travelled to Düsseldorf from abroad. Large delegations came for example from Brazil, Australia and New Zealand. Trade visitors from a total of 142 countries attended EuroShop 2020.

“This high level of international interest clearly documents the dynamism of the global retail world and the exceptional position EuroShop enjoys as its economic engine,” said Michael Gerling, Chairman of the EuroShop Advisory Board and CEO of the EHI Retail Institute Cologne.

“The success of eCommerce is a real encouragement for retailers: they have understood they have to give their shoppers good reasons beyond the ranges to enter their stores. This competition has taken retail as a whole to the next quality level. Investment is being made in shop fitting so as to create customer journeys,” explains Gerling who adds: “Beyond this, retail digitalisation is booming. It enables retailers to offer their shoppers even more services and link online and offline channels, on the one hand, while simplifying process flows, logistics and lots more, on the other.” At EuroShop 2020 digital transformation was therefore a key focus, also in terms of achieving the highest energy efficiency and sustainability possible.

Exhibitors underlined the high level of expertise among visitors at the event, especially their pronounced decision-making powers, because 70% of the trade fair guests were in international top management. Many of them also used their visit to EuroShop to learn about best practice cases and forward-looking trends in retail at the in total eight Stages. The varied programme of lectures held on the individual Stages on such topics as Retail Technology, Architecture and Store Design or Expo & Event was well attended across the board. Meeting with the same high level of approval were the numerous Specials at EuroShop, including the Start-up Hub, the Designer Village and Premium City.

Numbers speak for themselves here: 96% of trade fair visitors were satisfied with their visit to the trade fair. Just as many confirmed the outstanding position of EuroShop as a trend barometer, networking platform and largest event for the retail sectors.

Due to the current situation associated with the Coronavirus 19.000 visitors less attended this time than at the record event 2017.

The next EuroShop will be held in Düsseldorf from 26 February to 2 March 2023.  

13.11.2019

Energy storage in retail: ENERGY STORAGE EUROPE cooperates with EuroShop

At EuroShop 2020 from 16 to 20 February, ECOpark will focus on energy storage solutions, cost reduction and climate protection
In future, the ENERGY STORAGE EUROPE (ESE) trade fair will cooperate with EuroShop, the world’s leading trade fair for retail investment requirements. As part of this cooperation, commercial enterprises will receive information on how they can use storage systems to implement energy saving measures, which in turn help them secure competitive advantages and commit to climate protection. ESE is expanding the user initiative that was started last year and which also comprises the cooperation with ProWein, the world’s leading trade fair for wines and spirits, as well as GNTM, the world’s leading trade fairs for metallurgy and foundry technology. The next ENERGY STORAGE EUROPE will take place in Düsseldorf from 10 to 12 March 2020.

At EuroShop 2020 from 16 to 20 February, ECOpark will focus on energy storage solutions, cost reduction and climate protection
In future, the ENERGY STORAGE EUROPE (ESE) trade fair will cooperate with EuroShop, the world’s leading trade fair for retail investment requirements. As part of this cooperation, commercial enterprises will receive information on how they can use storage systems to implement energy saving measures, which in turn help them secure competitive advantages and commit to climate protection. ESE is expanding the user initiative that was started last year and which also comprises the cooperation with ProWein, the world’s leading trade fair for wines and spirits, as well as GNTM, the world’s leading trade fairs for metallurgy and foundry technology. The next ENERGY STORAGE EUROPE will take place in Düsseldorf from 10 to 12 March 2020.

“Our analyses show that many commercial users in retail, the metal industry and viticulture currently don't see storage as an integrated part of their energy systems and thus do not tap potentials for energy efficiency and climate protection,” says Andreas Moerke, Director ESE. “By cooperating with the leading trade fairs in these industries, we can show thousands of companies how energy storage can contribute to climate protection. In the coming months, we will approach the numerous customers of these trade fairs and connect them to energy storage system providers at ESE.”

Source:

Messe Düsseldorf GmbH

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019 (c) Saurer AG
FusionTwister for staple fibre yarns
26.09.2019

Saurer’s highly efficient FusionTwister at ShanghaiTex 2019

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.

Product Leadership Award Lectra
Product Leadership Award
18.07.2017

Frost & Sullivan Confers Lectra's Versalis® Digital Leather Cutting Solution with Product Leadership Award

Lectra has leveraged more than 10 years of experience in connected manufacturing to offer Versalis®, an innovative digital solution designed to cut leather without compromise on quality. Featuring a powerful automatic nesting system for overall improvements in efficiency, the fully automated solution enables automotive leather suppliers to cut costs, improve productivity and minimize waste while also establishing a pathway to value-added Industry 4.0 processes.

Lectra has leveraged more than 10 years of experience in connected manufacturing to offer Versalis®, an innovative digital solution designed to cut leather without compromise on quality. Featuring a powerful automatic nesting system for overall improvements in efficiency, the fully automated solution enables automotive leather suppliers to cut costs, improve productivity and minimize waste while also establishing a pathway to value-added Industry 4.0 processes.


Currently, almost 90% of leather used for automotive applications is cut using manual die presses, which require designers to build a physical prototype and finalize the design through trial and error. Lectra offers a fully digitalized leather solution from prototyping to cut parts—when used in combination with Lectra’s 3D prototyping and pattern-making software, Versalis digital leather cutting solution enables a 12-16 week reduction in development and launch cycles for vehicle seating models.
During the leather-cutting phase, the latest release of Versalis LeatherSuite allows automotive leather suppliers to achieve up to 15% greater productivity. Lectra’s end-to-end automotive leather offering furthermore guarantees optimal uptime through an extensive worldwide support network of field engineers and technical experts.
"Lectra focuses on a consultative approach that allows it to fully understand the customer’s needs before building a solution comprising software, hardware, consulting, training, and after-sales support,” said Frost & Sullivan Industry Analyst Kamalesh Mohanarangam. "Lectra’s equipment is fitted with more than 200 sensors that predict failure and immediately report issues to its call centres. This product feature and service has resulted in 98% uptime and very fast mean time to repair."


Although digital leather cutting solutions are an investment, leather cutters and Tier-1 suppliers have begun to recognize the value of these products. On average, Lectra’s solutions help customers achieve up to 7% savings on leather compared to manual die-press methods by minimizing human error and variability in the cutting room. A benchmark test of leather trim cutting for door panels demonstrated a 3.5% gain in material made possible by Versalis’ superior nesting capabilities compared to the customer’s yield using manual nesting with die press machines, representing potential savings of €9 million per year.
Versalis is the fruit of significant R&D investment for the company, which has always made re-investment of capital a priority. As part of a transformational plan, Lectra spent more than €50 million in investments between 2011 and 2015. With Lectra’s new strategy focusing on supporting their customers’ transition to Industry 4.0 standards, Lectra will increase the share of revenues dedicated to R&D to 10% for the period from 2017 to 2019, representing a rise of about 50% between 2016 and 2019.

Source:

Lectra