From the Sector

Reset
4 results
DiloGroup: successful INDEX exhibition (c) DiloGroup
DiloGroup at the INDEX
10.11.2021

DiloGroup: successful INDEX exhibition

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

Source:

Oskar Dilo Maschinenfabrik KG

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

28.10.2019

APPOINTMENT OF A NEW PRESIDENT OF CTT GROUP

Mr. Robert Bélanger, President of the Board of Directors of the CTT Group and President of Belt-Tech Products inc., is pleased to announce the appointment of Mr. Olivier Vermeersch as President/Chief Executive Officer of the CTT Group, one of the Collegial Center for Technology Transfer (CCTT) of the Cégep of Saint-Hyacinthe. Mr. Vermeersch succeeds Mr. Jacek Mlynarek from today. Mr. Mlynarek will remain associated to the CTT Group as an Ambassador and Strategic Advisor and - Research and Development, Partnership and Innovation.

The CTT Group Board of Directors and the entire team would like to thank Mr. Mlynarek for the energy and dedication he has devoted over the last 26 years to the development of the CTT Group, which is now recognized as one of the most important Collegial Center for Technology Transfer in Quebec and Canada. In 2009, Mr. Mlynarek received the Innovation System Builder Award from the Quebec Association for the Development of Research and Innovation.

Mr. Robert Bélanger, President of the Board of Directors of the CTT Group and President of Belt-Tech Products inc., is pleased to announce the appointment of Mr. Olivier Vermeersch as President/Chief Executive Officer of the CTT Group, one of the Collegial Center for Technology Transfer (CCTT) of the Cégep of Saint-Hyacinthe. Mr. Vermeersch succeeds Mr. Jacek Mlynarek from today. Mr. Mlynarek will remain associated to the CTT Group as an Ambassador and Strategic Advisor and - Research and Development, Partnership and Innovation.

The CTT Group Board of Directors and the entire team would like to thank Mr. Mlynarek for the energy and dedication he has devoted over the last 26 years to the development of the CTT Group, which is now recognized as one of the most important Collegial Center for Technology Transfer in Quebec and Canada. In 2009, Mr. Mlynarek received the Innovation System Builder Award from the Quebec Association for the Development of Research and Innovation.

Mr. Vermeersch is in a familiar territory, since he has been working for the CTT Group from the beginning of his career in 1991. In 2014, he was promoted Vice President - Research and Development and more recently, he was appointed as Executive Vice-President. In 2014, he was awarded the prestigious Excellence Award from the “Fonds de recherche du Québec – Nature et technologies”. Mr. Vermeersch will continue to be Chairholder of the NEXTEX Industrial Chair of St-Hyacinthe College, a Canadian NSERC Level 2 Chair in Innovative Technical Textiles, which brings together many of CTT Group's customers.

More information:
CTT GROUP
Source:

CTT Group

Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel ©Lectra
Nathalie Brunel
12.12.2017

Lectra appoints Nathalie Brunel as Vice-President Sales, Fashion & Apparel

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

  • Nathalie Brunel’s role is to support Lectra’s global teams in the roll-out of its new strategy to customers

Paris – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the appointment of Nathalie Brunel to the role of Vice-President Sales, Fashion & Apparel. Based at Lectra’s headquarter’s in Paris, Nathalie reports to Edouard Macquin, Chief Sales Officer, Lectra and a member of the executive committee.

Nathalie Brunel’s role is to support Lectra’s subsidiaries as they conduct the Group’s strategic roadmap through the deployment of an offer—integrating the PLM and the cutting room of the future—which is rooted in customer experience. Nathalie will notably work with six countries: United States, China, Germany, United Kingdom, France and Italy.

“The fashion and apparel industry, a historic market for Lectra, is the pillar of our international presence. Our customers expect a high level of expertise and advice to meet the challenges they face due to the digitalization of their professions. Nathalie Brunel’s experience in transforming organizations and developing business for complex solutions within large groups is a valuable asset for both Lectra and our customers,” states Edouard Macquin.

“The fashion and apparel ecosystem is clearly entering the digital era. I aim to bring Lectra’s value proposition to our customers, facilitating their adoption of Industry 4.0 principles. I am proud to contribute to the integration of new technologies in their processes, from design to the finished product. It is crucial to meet the needs of companies facing a complex and fragmented market that is generating both local, and global, pressures,” underlines Nathalie Brunel.

Nathalie Brunel has over 20 years of experience in managing large accounts and management responsibility. In 1996, she joined the Altran group where she successively held the roles of Development Director, Director of a business unit, Associate Director, and Executive Director of large accounts. In 2011, Orange Business Services recruited Nathalie Brunel as Vice-President, Business Operations and Support, then Vice-President Large Accounts, Manufacturing and IT. Prior to joining Lectra, Nathalie Brunel held the position of CEO and shareholder of Okavango Energy, a consulting and industrial energy performance company.

Nathalie has a diploma from the Institut supérieur de commerce de Paris.

Source:

Lectra