From the Sector

Reset
21 results
INDA: Five new Board of Directors' members (c) INDA
05.03.2024

INDA: Five new Board of Directors' members

INDA, the Association of the Nonwoven Fabrics Industry, announced the election of five new members to serve on its 2024 Board of Directors. The Board of Directors play a key role in advancing INDA’s strategic objectives, actively supporting both the industry and the membership. Their primary responsibility lies in ensuring that INDA remains responsive to the evolving needs of its members and the broader nonwovens industry, guiding the formulation of policies and programs.

The five new Board members include:

  • Jaren J. Edwards, President, Stein Fibers
  • Edward McNally, Sales Director Nonwoven, Oerlikon Nonwoven
  • Thomas Olsen, Senior Vice President, Americas Business Area, Suominen
  • Patricia A Sargeant, Vice President, Glatfelter Corporation
  • Paul Wood, President, Ontex North America

The Board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus appointees.
The Executive Committee includes:

INDA, the Association of the Nonwoven Fabrics Industry, announced the election of five new members to serve on its 2024 Board of Directors. The Board of Directors play a key role in advancing INDA’s strategic objectives, actively supporting both the industry and the membership. Their primary responsibility lies in ensuring that INDA remains responsive to the evolving needs of its members and the broader nonwovens industry, guiding the formulation of policies and programs.

The five new Board members include:

  • Jaren J. Edwards, President, Stein Fibers
  • Edward McNally, Sales Director Nonwoven, Oerlikon Nonwoven
  • Thomas Olsen, Senior Vice President, Americas Business Area, Suominen
  • Patricia A Sargeant, Vice President, Glatfelter Corporation
  • Paul Wood, President, Ontex North America

The Board is comprised of elected Board Officers. One-third of the entire Board is elected each year for a three-year term by INDA’s general membership. INDA’s Executive Committee, empowered to act on behalf of the Board between meetings, consists of the Board Officers plus appointees.
The Executive Committee includes:

  • Chair: Mark Thornton, Vice President, The Procter & Gamble Company
  • Vice Chair: Barbara Lawless, VP of Sales and Marketing – Medical Products, Precision Fabrics Group, Inc.
  • Past Chair: Bryan Haynes, Senior Technical Director for Global Nonwovens, Kimberly-Clark Corporation
  • Appointee: Mike Clark, President, Filtration Solutions, Hollingsworth & Vose Company
  • Appointee: Jodi Russell, Vice President R&D, Cleaning Innovation, Packaging & Sustainability, The Clorox Company
  • Appointee: Jeff Stafford, Vice President of Nonwovens, Milliken & Company
  • Appointee: Robert Weilminster, EVP & General Manager, US & Canada – Health, Hygiene and Specialties Division, Berry Global
  • Appointee: Tom Zaiser, CEO, Indorama Ventures
Source:

INDA, Association of the Nonwoven Fabrics Industry

09.02.2023

Oerlikon: More services for customers in the USA

The American subsidiary of the Swiss Oerlikon Group, Oerlikon Textile Inc., is expanding and moving into new, modern premises tailored to future needs just a few kilometers away from its previous location in Charlotte, North Carolina. A new service center for the polymer processing industry will be created on approximately 4500 m² of office and commercial space latest by the middle of this year.
Oerlikon expands service offering for customers in the USA

"We are the preferred technology partner in the field of man-made fiber production in the USA and not only want to remain so, but also to further expand our services for our customers. However, the previous premises no longer offered any opportunities for expansion," explains Chip Hartzog, President of Oerlikon Textile Inc., the logical step.

The American subsidiary of the Swiss Oerlikon Group, Oerlikon Textile Inc., is expanding and moving into new, modern premises tailored to future needs just a few kilometers away from its previous location in Charlotte, North Carolina. A new service center for the polymer processing industry will be created on approximately 4500 m² of office and commercial space latest by the middle of this year.
Oerlikon expands service offering for customers in the USA

"We are the preferred technology partner in the field of man-made fiber production in the USA and not only want to remain so, but also to further expand our services for our customers. However, the previous premises no longer offered any opportunities for expansion," explains Chip Hartzog, President of Oerlikon Textile Inc., the logical step.

All processes will be optimized in the new buildings. Incoming goods, warehouse and dispatch will be merged, inventory control will be strengthened. On top, the range of services in the repair area will be expanded. "In addition to our services in the area of filament and carpet yarn systems, we will also be able to offer our customers repair services for staple fiber components such as crimpers or nonwoven systems in the future," says Chip Hartzog. This will further strengthen the market position for the Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands.

Oerlikon Textile Inc. has been active in the manmade fibers business in the USA for over 55 years. In addition to the sale of Staple Fiber, BCF, IDY, POY, FDY and texturing plants, the product portfolio also includes upgrades and modernization of old plants, service and training offers as well as repair services and spare parts supplies.

(c) Oerlikon. Oerlikon Nonwoven OSR spunmelt technology
Oerlikon Nonwoven OSR spunmelt technology
03.09.2021

Oerlikon Nonwoven at INDEX: Focus on nonwoven products

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens
More information:
Oerlikon Nonwoven INDEX
Source:

Oerlikon

Production capacities for European supplies of protective equipment expanded (c) Oerlikon
The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. >> Picture download Innovatec commissions second Oerlikon Nonwoven meltblown system
03.12.2020

Production capacities for European supplies of protective equipment expanded

Neumünster/Troisdorf, Germany, December 3, 2020 – just a few days ago, the second newly-delivered Oerlikon Nonwoven meltblown system was commissioned at Innovatec’s state-of-the-art machine park. With it, the nonwovens manufacturer – based in Troisdorf in North Rhine-Westphalia – immediately started producing polypropylene filter nonwovens: in particular for use in protective face masks, which have been increasingly in demand since the start of the coronavirus pandemic and whose domestic manufacture is being supported by the Ger-man Government. Here, the highly-efficient Oerlikon Nonwoven meltblown technology from Neumünster is supporting the production of these highly-effective filter media.

Neumünster/Troisdorf, Germany, December 3, 2020 – just a few days ago, the second newly-delivered Oerlikon Nonwoven meltblown system was commissioned at Innovatec’s state-of-the-art machine park. With it, the nonwovens manufacturer – based in Troisdorf in North Rhine-Westphalia – immediately started producing polypropylene filter nonwovens: in particular for use in protective face masks, which have been increasingly in demand since the start of the coronavirus pandemic and whose domestic manufacture is being supported by the Ger-man Government. Here, the highly-efficient Oerlikon Nonwoven meltblown technology from Neumünster is supporting the production of these highly-effective filter media.

“Back in June 2020, Oerlikon Nonwoven delivered the first so-called 2-beam system to Innovatec”, reports Rainer Straub, Head of Oerlikon Nonwoven. Together with the second production line, the Troisdorf-based enterprise has been able to almost double its filter nonwoven output to date. The North Rhine-Westphalian company now has filter media production capacities that can be used to manufacture up to 2.5 billion operating room filter masks or a billion highly-effective FFP2 masks per year.

The, according to its own information, leading manufacturer of meltblown mask nonwovens in Europe is participating in the German Government’s ‘Nonwovens Production’ grant program to ramp up its output capacities and has for this reason already received a visit from top German politicians, including Federal Minister for Economic Affairs Peter Altmaier and North Rhine-Westphalia Minister President Armin Laschet. Together, politicians and industry want to ensure that the production capacities for protective equipment continue to grow in Germany and that above all critical supply chains are secured at both national and European levels. And companies such as Innovatec and Oerlikon Nonwoven are actively contributing towards this.

Oerlikon: Meltblown und Spunbond (c) Oerlikon
19.11.2020

Oerlikon: Meltblown and Spunbond technologies

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Protective equipment demands high-end nonwoven products
The rising demand for protective masks and other medical protective equipment since the start of the coronavirus pandemic and the associated global ramping up of production capacities has also resulted in an increase in the demand for nonwovens for the production thereof. Initially, this resulted in bottlenecks in the provision of meltblown filter nonwovens. To this end, there had until this point be very few producers of medical filter nonwovens outside China. Meanwhile, the demand for spunbond systems is also rising. “Due to the structure of our group, we are in the fortunate position to swiftly reallocate and free up our production capacities. This means that we are able to relatively quickly deliver not only meltblown systems, but also spunbond equipment”, explains Dr. Ingo Mählmann, Head of Sales & Marketing at Oerlikon Nonwoven, talking about the positive situation at the company.

The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Our machines and systems for manufacturing manmade fiber and nonwovens solutions enjoy an outstanding reputation throughout the world. Ever more manufacturers in the most diverse countries are hoping to become independent of imports”, comments Dr. Mählmann. The Oerlikon Nonwoven meltblown systems are being delivered to Germany, China, Turkey, United Kingdom, South Korea, Italy, France, North America and – for the very first time – to Australia until well into 2021.

Quality and efficiency in demand
Depending on the purpose of the application, medical PPE (personal protection equipment) should be breathable and comfortable to wear, protect medical staff against viruses, bacteria and other harmful substances and form a barrier against liquids. For these reasons, they are often made of either pure spunbond or of spunbond-meltblown combinations. Here, the meltblown nonwoven core assumes the barrier or filter task, while the spunbond has to retain its shape, while being tear-resistant, abrasion-proof, absorbent, particularly flame-resistant and nevertheless extremely soft on the skin.

All masks are not created equal – thanks to the ecuTEC+
Protection against infections such as coronavirus can only be guaranteed with the right quality.

The nonwovens can be electrostatically-charged in order to further improve the filter performance without additionally increasing breathing resistance. Here, Oerlikon Nonwovenʼs patented ecuTEC+ electro-charging unit excels in terms of its extreme flexibility. Nonwovens manufacturers can freely choose between numerous variation options and set the optimal charging method and intensity for their specific applications. In this way, even the smallest particles are still attracted and reliable separated by a relatively open-pored nonwoven. Nevertheless, mask wearers are still able to easily breathe in and out due to the comparatively loose formation of the fibers. To this end, it comes as no surprise that all meltblown systems currently destined for the production of mask nonwovens are equipped with the ecuTEC+ unit.

Erstklassige Wischtücher mit Phantom-Technologie (c) Oerlikon Manmade Fibers
Phantom technology enables greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials.
22.10.2020

First class wipes with Phantom technology

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

The patented process for hybrid nonwovens combines the best of both airlaid and spunmelt technologies to deliver new, flexible ways of creating wet and dry wipes. Phantom technology offers additional benefits by reducing resources and cost, while increasing overall performance. The exclusive license gives Oerlikon Nonwoven – Teknoweb Materials distribute this technology worldwide. In addition, Oerlikon Nonwoven – Teknoweb Materials have further refined the process into their own Levra technology – an entry-level option which offers tailored production volumes with lower investment costs but is still suitable to be upgraded to the premium Phantom model in the future.

Quality products that cost less

Essentially, Phantom technology was developed to produce hybrid substrates. The spunmelt and airlaid processes are merged into one step to combine cellulose fibers, long fibers such as cotton, or even powders with polymer fibers in unprecedented ways. This technology has clear advantages in terms of resources, performance, and cost compared to the previous processes on the market. By removing hydroentanglement, it is no longer necessary to dry the material. Adjusting the process can optimize relevant product characteristics such as softness, strength, dirt absorption, and liquid absorption. In the end, this even increases the quality of the product itself.

The greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials. Wipes feel softer to the touch while providing more protection for the hands. Up to 90% of the material can consist of pulp fibers, although natural alternatives like cotton or synthetic fibers can be added to the mix.

Phantom technology has not only found a practical application in a variety of wipes – such as hygiene wipes, anti-bacterial wipes, surgical wipes, or industrial wipes – but also in absorbent cores, for instance indiapers or fempro products. With so many applications, Oerlikon Nonwoven – Teknoweb Materials are fully prepared to deliver Procter & Gamble’s innovative Phantom technology to the global nonwovens market.

Source:

Oerlikon Manmade Fibers

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe (c) Oerlikon
Daniel Günther (2nd from left), Schleswig-Holstein’s Minister President, together with Rainer Straub, Head of Oerlikon Nonwoven, Matthias Pilz, Head of Oerlikon Neumag, and Matthias Wäsch, Chairman of the Works Council, at the tour of the Neumünster site where the Oerlikon Nonwoven meltblown technology – currently in huge demand across the globe – is manufactured.
08.07.2020

Oerlikon Nonwoven meltblown technology meanwhile in demand across the globe

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

  • Schleswig-Holstein Minister President visits Neumünster, Germany


Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at the Oerlikon Nonwoven business unit of the Swiss Oerlikon Group. From the manufacturing site in Neumünster, Germany, the high-tech meltblown systems – with their patented ecuTE+ nonwovens electro-charging technology – are meanwhile be exported all over the world. For the very first time, a contract has now been signed with a business in Australia. Today, Schleswig-Holstein’s Minister President Daniel Günther was won over on site by the technology of a ‘global player’. Rainer Straub, Head of Oerlikon Nonwoven, was thrilled, stating: “The machines and systems for manufacturing manmade fiber and nonwovens solutions from Neumünster enjoy an outstanding reputation throughout the world. It is especially in this crisis that the technology from Schleswig-Holstein has proven itself to be absolutely world-class.”

In addition to a tour of the meltblown system and its assembly and production facilities, the visit by Minister President Daniel Günther had one purpose above all: the dialog between politicians and business. Rainer Straub, Head of Oerlikon Nonwoven, and Matthias Pilz, Head of Oerlikon Neumag, jointly expressed their thanks for the support that Oerlikon has repeatedly had the fortune to experience over the past months and years in Schleswig-Holstein and looked to the future full of hope. “As a result of our additional investment at the site here in Neumünster – be this in our new technology center that will be completed by the end of this year or in our new logistics center that is already operating – we, as one of the region’s largest employers, are continuing to move forward, supported by a State Government that is also focusing on both promoting industry and business and on advancing an efficient training and educational system, as innovation is only possible with outstanding engineers”, stated Matthias Pilz. And Rainer Straub directed his appeal specifically at the Minister President: “Treat education and training as a priority. Ultimately, they will secure the future of Schleswig-Holstein as a center of excellence and manufacturing!”

Five-million-euro digitalization program

Daniel Günther, the incumbent Minister President of Schleswig-Holstein since 2017, immediately responded, making reference to one of the Federal State’s current training initiatives: “The State Government is supporting higher education institutions and students in the present coronavirus crisis. With a five-million-euro digitalization program, we are investing on the long-term digitalization of our higher education institutions. With this, we are overall creating a future for young people, particularly also for those who could very well go on to invent the next generation of manmade fiber systems.” And the Minister President was just as impressed by the willingness and readiness with which Oerlikon has been providing high-level support since the beginning of the COVID-19 pandemic to master the present challenges as he was with the company’s meltblown technology itself. Rainer Straub explained: “When, at the beginning of the pandemic in February, demand for protective face masks increased rapidly, we at Oerlikon Nonwoven responded immediately. We ramped up all the available production capacities here in Neumünster in order to quickly manufacture nonwovens for producing face masks using our laboratory systems. As a result, we have been able to make a small, regional contribution to covering demand. In parallel, we have pulled out all the stops in order to systematically further expand our skills as machine and system builders so as to cater to the initially expected, and now also continuing, global demand for meltblown systems as quickly as possible.”

Leading meltblown technology

The Oerlikon Nonwoven meltblown technology – with which nonwovens for protective masks can also be manufactured, among other things – is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from plastic fibers. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Ever more manufacturers in the most diverse countries are hoping to become independent of imports. Therefore, what we are experiencing in Germany is also happening in both industrialized and emerging countries throughout the world”, commented Rainer Straub. In addition to China, Turkey, the United Kingdom, South Korea, Austria and numerous countries in both North and South America, Australia and not least Germany will for the first time also be among the countries to which Oerlikon Nonwoven will be delivering machines and equipment before the end of 2021.

First Oerlikon Nonwoven meltblown technology plant sold to Australia (c) Oerlikon Nonwowen
In times of Corona: Online contract signing between Oerlikon Nonwoven and OZ Health Plus for the new order of an Oerlikon Nonwoven meltblown line for Australia.
07.07.2020

First Oerlikon Nonwoven meltblown technology plant sold to Australia

  • Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

  • Australian production of medical masks to commence from April 2021 with Oerlikon Nonwoven meltblown technology

Neumünster/Germany, Brisbane/Queensland/Australia – Queensland company OZ Health Plus will establish Australia’s first manufacturing plant to make the critical fine plastic material used in most protective face masks. OZ Health Plus has purchased a plant of the Swiss-based technology company Oerlikon to establish a Queensland-based production plant for spun-bond and meltblown nonwovens. These fabrics are essential for Australia’s face mask manufac-turers, who currently produce about 500 million medical and industrial masks per year. However the fabrics have to be imported from overseas and access to these materials has been severely disrupted during the COVID-19 pandemic.

Oerlikon’s German-based business unit Oerlikon Nonwoven has now executed legal and commercial arrangements to supply the specialised machinery which can manufacture the nonwoven material lo-cally. The same machinery is used to make almost all face masks material manufactured in Europe. The world-leading Oerlikon Nonwoven meltblown plant will commence operations in April next year, with a second stage planned for late 2021.

The Oerlikon Nonwoven plant can produce meltblown fabrics for 500 million masks per year, along with other medical and non-medical grade products, filtration products, sanitary items, antiseptic wipes and more. Rainer Straub, Head of Oerlikon Nonwoven said: “We are very proud that we can now for the first time supply our Oerlikon Nonwoven meltblown technology to Australia. Due to the short delivery time, we hope to make our contribution to the Australian population and their safe sup-ply of high-quality protective masks as soon as possible.”

Queensland company secures manufacturing plant for the only Australian production of critical face mask material

OZ Health Plus director Darren Fooks said: “Australia has access to raw polypropylene feedstock but lacks the plant to convert that raw material to specialised spunbond and meltblown fabrics. These fabrics are essential for local mask manufacturing. The Australian-based Oerlikon Nonwoven plant will fill the production chain gap for Australia by producing the fabrics we need for mask production and many other products – it will reduce Australia’s protective mask supply chain from thousands of kilo-metres, to tens of kilometres.”

“Our decision in favor of Oerlikon Nonwoven was a given once we had analyzed the material samples. It was a matter of course for us that the Business Unit of the Oerlikon Manmade Fibers segment could supply high-quality machines and systems”, added Darren Fooks.

OZ Health Plus’ new facilities will take up 15,000 m2 of manufacturing space and will employ 100 full-time roles once the second stage of the project is complete. OZ Health Plus continues to work with both Queensland and Federal Government stakeholders and values their support in bringing this vital capability to Queensland.

Leading meltblown technology

Oerlikon Nonwoven meltblown technology, which can also be used to produce nonwovens for protec-tive masks, is recognized in the market as the technically most efficient method of producing high-separation filter media from plastic fibers. Most of the protective mask capacities available in Europe to date are produced on Oerlikon Nonwoven equipment.

Source:

Andre Wissenberg
Marketing, Corporate Communications & Public Affairs

04.06.2020

Oerlikon commissions new logistics center in Neumünster

  • Digital processes also speed up the manufacture of meltblown systems

in order to further optimize the material provision for the Oerlikon Neumag and Oerlikon Nonwoven business units and to strengthen internal processes at the German site in Neumünster, the Manmade Fibers segment of the Swiss Oerlikon Group decided last year to invest in a state-of-the-art logistics center with a new lift center. It has already been fully operational for a few weeks. This is tremendously helpful for speeding up the processing of the numerous orders for meltblown systems for manufacturing high-quality nonwovens for protective masks and apparel that Oerlikon Nonwoven has received over the past months alone

  • Digital processes also speed up the manufacture of meltblown systems

in order to further optimize the material provision for the Oerlikon Neumag and Oerlikon Nonwoven business units and to strengthen internal processes at the German site in Neumünster, the Manmade Fibers segment of the Swiss Oerlikon Group decided last year to invest in a state-of-the-art logistics center with a new lift center. It has already been fully operational for a few weeks. This is tremendously helpful for speeding up the processing of the numerous orders for meltblown systems for manufacturing high-quality nonwovens for protective masks and apparel that Oerlikon Nonwoven has received over the past months alone

Investing in a new Oerlikon Neumag and Oerlikon Nonwoven logistics center is paying dividends: the processing speed when manufacturing new systems – very much to the benefit of customers – considerably improved in the first week after the center started operating, not least as a result of the optimized processes and the material handling. After 25 years, the time had finally come to break new ground and to better equip ourselves for the future requirements of the markets. The paternoster storage facility to date not only needed to have regular repairs carried out due to its age, it was also too small for the projects increasingly being carried out today. The only 90 m² were capable of storing around 12,000 parts. In contrast, the new logistics center now offers more than 250 m² of storage space for in excess of 25,000 parts. As a result, this now also houses all small parts, which used to be stored in the high-rack facility due to lack of space.

New hardware, new software
Coinciding with the opening of the new logistics center, Oerlikon also introduced new digital processes that will also help cope with the increasing production volumes. To this end, consistently maintained master data and photos for all parts ensure safe, paper-free storage and handling of the material from now on. In order to minimize mistakes, a laser pointer now indicates from which or to which space the goods are moved. Furthermore, a photo of the material, sorted to type, is displayed on the screen. The digitalization of the warehousing facilities secures the pick and put-away process so that checking material numbers becomes superfluous when removing items from the warehouse.

 

Source:

Oerlikon

28.05.2020

New secured remote service concept Oerlikon Neumag and Oerlikon Nonwoven

To increase system productivity and to keep service downtimes as short as possible, remote servicing has long been absolutely essential within a globally-networked textile industry. For its Oerlikon Neumag and Oerlikon Nonwoven brands, the Oerlikon Manmade Fibers segment is offering a new secured remote service concept with defined loan-based hardware and software.

A remote connection with remote access to the systems creates new service options that would not have been possible over the phone or by e-mail. Upon signing a secured remote service contract, Oerlikon Manmade Fibers provides its customers with the necessary hardware and software, exchanges the hardware in the event of changes to security requirements and supplies continuous software updates.

To increase system productivity and to keep service downtimes as short as possible, remote servicing has long been absolutely essential within a globally-networked textile industry. For its Oerlikon Neumag and Oerlikon Nonwoven brands, the Oerlikon Manmade Fibers segment is offering a new secured remote service concept with defined loan-based hardware and software.

A remote connection with remote access to the systems creates new service options that would not have been possible over the phone or by e-mail. Upon signing a secured remote service contract, Oerlikon Manmade Fibers provides its customers with the necessary hardware and software, exchanges the hardware in the event of changes to security requirements and supplies continuous software updates.

“Within the context of a secured remote service contract, we loan the hardware to our customers. This means that our clients do not have additional procurement costs and they do not have to worry about ensuring their technology is constantly up-to-date in terms of security requirements. We assume this task for them”, explains Jan Pauer, Technical Sales Manager responsible for modifications, talking about the benefits of this service concept.

Secured remote service contracts are offered for all Oerlikon Neumag and Oerlikon Nonwoven sys-tems and are available with additional, customer-specific services.

Source:

Oerlikon

The Oerlikon Nonwoven meltblown technology (c) Oerlikon
The Oerlikon Nonwoven meltblown technology
14.05.2020

Oerlikon Nonwoven deliveringmeltblown technology to FleeceforEurope

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

Source:

Marketing, Corporate Communications & Public Affairs

Logo oerlikon
Oerlikon expands labatory capacities
30.04.2020

Oerlikon Nonwoven expands it laboratory nonwovens production capacities

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Boom in orders
Furthermore, Oerlikon Nonwoven has also fired up the production of the machines and systems used for its meltblown technology. The demand from Germany, Europe and the rest of the world has quickly
secured the company a high in orders..
We will be commissioning the first meltblown system at the site of a leading Western European nonwovens producers in the second quarter of 2020. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon
Nonwoven systems.

Source:

Marketing, Corporate Communications & Public Affairs

Logo oerlikon
Oerlikon blickt positiv in die Zukunft
23.04.2020

Oerlikon Manmade Fibers segment looking positively towards the future during the coronavirus pandemic

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

Source:

Marketing, Corporate Communications
& Public Affairs

Oerlikon Logo
Oerlikon Logo
16.04.2020

myOerlikon.com : service portal and e-commerce platform in one

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.


Real security during virtual shopping
At the same time, users can access the myOerlikon.com e-commerce platform, which operates in parallel.
Customers can not only place orders here, they can also send online inquiries to Oerlikon, view prices and warehouse stocks and track inquiries,
quotations and orders already made or placed, among many other things. As a result of online access to original parts catalogs for the respective customer machines and systems, erroneous orders can be avoided.
Log-in is secure for users, as are all transactions carried out using the platform. With this, Oerlikon is implementing real security for all virtual purchases. All data exchanged is fundamentally
encrypted and hence protected against unauthorized access.

 

Source:

Marketing, Corporate Communications & Public Affairs

Meltblown Vliesstoffanlagen von Oerlikon Nonwoven (c) Oerlikon Manmade fibers
Meltblown Vliesstoffanlagen von Oerlikon Nonwoven
02.04.2020

Oerlikon Nonwoven large-scale meltblown sold to Asia

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

The demand for filtration nonwovens for medical applications has risen tremendously across the globe since the outbreak of the Sars-CoV-2 (coronavirus) epidemic, presenting all manufacturers with huge challenges. A meltblown system will be commissioning at the site of a leading Western European nonwovens producers as early as the second quarter of 2020. This system will be deployed exclusively in the manufacture of nonwovens for respiratory masks.

Due to the current state of emergency with regards to the local supply of face masks, Oerlikon Nonwoven is currently using its own laboratory system to produce electrostatically-charged filter media which are being sent to local small businesses and companies for the manufacture of face masks. 

 

More information:
Oerlikon Nonwoven
Source:

Oerlikon Manmade fibers

Oerlikon Nonwoven at the INDEX in Geneva (c) Oerlikon
Oerlikon Nonwoven at the INDEX in Geneva
21.02.2020

Oerlikon Nonwoven at the INDEX in Geneva

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

More information:
Oerlikon
Source:

Oerlikon

Die Elektrochargingeinheit von Oerlikon Nonwoven (c) Oerlikon Nonwoven
Die Elektrochargingeinheit von Oerlikon Nonwoven
23.01.2020

Oerlikon Nonwoven mit überzeugender Meltblown und Spinnvliestechnologie

Effiziente Lösungen und umfassendes Technologiewissen für die anspruchsvolle Filtrationsaufgaben stellen die Experten von Oerlikon Nonwoven vom 26. bis zum 28. Februar auf der FiltXPO 2020 in Chicago, USA dem internationalen Fachpublikum vor (Stand # 420).

Die Meltblown Technologie gehört zu den effizientesten Methoden bei der Erzeugung sehr feiner und hoch abscheidender Filtermedien aus Kunststofffasern. Neue, einzigartige und höchst anspruchsvolle Filtermedien lassen sich dank der optimierten Meltblown-Technologie von Oerlikon Nonwoven einfach herstellen. Diese zeichnet sich durch eine konstante Schmelzedruckverteilung bei gleichbleibender Verweilzeit über die gesamte Breite des Spinnbalkens hinweg aus. Zudem vermeidet die neuartige Führung und Verteilung der Prozessluft außerhalb des Breitschlitzverteilers der Oerlikon Nonwoven Technologie sogenannte Hotspots. Dies sorgt insgesamt für besonders homogene Vlieseigenschaften und Flächengewichte auch bei empfindlichen Rohstoffen.

Effiziente Lösungen und umfassendes Technologiewissen für die anspruchsvolle Filtrationsaufgaben stellen die Experten von Oerlikon Nonwoven vom 26. bis zum 28. Februar auf der FiltXPO 2020 in Chicago, USA dem internationalen Fachpublikum vor (Stand # 420).

Die Meltblown Technologie gehört zu den effizientesten Methoden bei der Erzeugung sehr feiner und hoch abscheidender Filtermedien aus Kunststofffasern. Neue, einzigartige und höchst anspruchsvolle Filtermedien lassen sich dank der optimierten Meltblown-Technologie von Oerlikon Nonwoven einfach herstellen. Diese zeichnet sich durch eine konstante Schmelzedruckverteilung bei gleichbleibender Verweilzeit über die gesamte Breite des Spinnbalkens hinweg aus. Zudem vermeidet die neuartige Führung und Verteilung der Prozessluft außerhalb des Breitschlitzverteilers der Oerlikon Nonwoven Technologie sogenannte Hotspots. Dies sorgt insgesamt für besonders homogene Vlieseigenschaften und Flächengewichte auch bei empfindlichen Rohstoffen.

Die Beladeeinheit aus dem Hause Oerlikon Nonwoven punktet gegenüber den zurzeit am Markt verfügbaren Konzepten mit ihrer hohen Flexibilität bei der Aufladung unterschiedlichster Vliesapplikationen. Der Anwender kann zwischen einer großen Anzahl an Variationsmöglichkeiten frei wählen und je nach Filterapplikation die optimale Beladungsmethode einstellen. Mit der Beladeeinheit von Oerlikon Nonwoven können so auch Filterklassen im Bereich EPA und HEPA hergestellt werden.

Die neue Formierzone sorgt für eine verbesserte Gleichmäßigkeit bei der Vliesbildung über die gesamte Breite auch bei hohen Spinngeschwindigkeiten und speziellen Polymeren sowie Polymerkombinationen. Durch die neu gestaltete Ablage wird außerdem erreicht, dass am Ende ein geringerer Vlieskantenabschnitt notwendig ist. Die neu entwickelte Mixed-Fiber Technologie ermöglicht die Kombination verschiedener Filamentquerschnitte und -polymere, um z.B: ein ideales Filter- und Plissierverhalten einstellen zu können.

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

The Oerlikon Nonwoven electro-charging unit (c) Oerlikon Nonwoven
The Oerlikon Nonwoven electro-charging unit
23.01.2020

Oerlikon Nonwoven showcases convincing meltblown and spunbond technology

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

 

More information:
Oerlikon Nonwoven Filtxpo
Source:

Oerlikon Nonwoven

Oerlikon Nonwoven at SINCE 2019 (c) Oerlikon
Oerlikon Nonwoven at SINCE 2019
14.12.2019

Oerlikon: Trade fair appearance at the SINCE in Shanghai

Tailor-made solutions for hygiene, medical, filtration and other technical applications as well as extensive product and process know-how – with these arguments Oerlikon Nonwoven made a convincing appearance at the 18th Shanghai International Nonwoven Exhibition (SINCE) that took place from December 11 to 13.

Dr. Ingo Mählmann, Head of Sales and Marketing of Oerlikon Nonwoven, was very pleased with the three lively days at the trade fair: "The many discussions showed that we are on the right track with our strategy and the further development of our technologies with regard to nonwovens. Visitors were impressed by our technology solutions for disposable nonwoven fabrics or geotextiles". Almost all wellknown nonwoven fabric producers visited the trade fair stand of the plant manufacturer from Neumünster to find out about the advantages of spunbond, meltblown and airlaid technologies.

Overall, the nonwoven fabric team of the Oerlikon Group draws a very positive conclusion and looks back with satisfaction on the intensive and good quality discussions as well as numerous concrete inquiries from customers and prospective customers.

Tailor-made solutions for hygiene, medical, filtration and other technical applications as well as extensive product and process know-how – with these arguments Oerlikon Nonwoven made a convincing appearance at the 18th Shanghai International Nonwoven Exhibition (SINCE) that took place from December 11 to 13.

Dr. Ingo Mählmann, Head of Sales and Marketing of Oerlikon Nonwoven, was very pleased with the three lively days at the trade fair: "The many discussions showed that we are on the right track with our strategy and the further development of our technologies with regard to nonwovens. Visitors were impressed by our technology solutions for disposable nonwoven fabrics or geotextiles". Almost all wellknown nonwoven fabric producers visited the trade fair stand of the plant manufacturer from Neumünster to find out about the advantages of spunbond, meltblown and airlaid technologies.

Overall, the nonwoven fabric team of the Oerlikon Group draws a very positive conclusion and looks back with satisfaction on the intensive and good quality discussions as well as numerous concrete inquiries from customers and prospective customers.

Source:

Oerlikon

Oerlikon feiert vier Weltpremieren zur ITMA Barcelona 2019 (c) Oerlikon
Oerlikon Shuttle ITMA 2019
08.05.2019

Oerlikon celebrates four world premieres at ITMA Barcelona 2019

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

  • Clean Technology. Smart Factory.

Remscheid – Oerlikon invites all visitors to this year's ITMA in Barcelona on a journey into the future of manmade fiber production. From 20 to 26 June 2019, the world market leader will show all its guests its vision of a sustainable and automated manmade fiber production in a virtual 4D showroom at its 1,000 m² stand in Hall 7, A101: "Clean Technology. Smart Factory." is the motto of the future. And this is only a stone's throw away from reality at the stand. Because today Oerlikon is presenting four world premieres for efficient machine and plant concepts in a new, innovative industrial design. Together with numerous other innovations, all this forms the new DNA of the Oerlikon Manmade Fibers segment.

The challenges for the manmade fiber industry are manifold and Oerlikon shows its customers solutions:

1. Choosing the right business model
Price pressure on fiber and yarn manufacturers is growing due to global market consolidation. Here it is important to position oneself correctly. Are you producing polyester, nylon or polypropylene for the niche market and skimming off good margins with innovative products and ingenious material properties, or are you looking for business success through economies of scale in the volume market such as the constantly growing apparel sector? Oerlikon has the right answers for both business models. And the most important thing: the market leader supplies all solutions from a single source. See for yourself at the world premieres of the machine and system concepts of WINGS FDY PA6, BCF S8 Tricolor and the revolutionary eAFK Evo texturing machine.

2. Finding alternatives for good personnel
Finding good operators in the manmade fiber industry is becoming increasingly difficult, even in emerging industrial nations such as China, India and Turkey. The solution is obvious. What, for example, the automotive industry achieved years ago with the 3rd Industrial Revolution is now also taking its course in the textile industry. And at the same time it is even shifting up a gear. In the next step, automation in combination with digitization will lead to new, sustainable production. Oerlikon will be showing how automation and digitization interact at ITMA. Self-learning machines and systems, artificial intelligence (AI), remote services and edge computing are just a few of the key words in the digital half of the new Oerlikon Manmade Fibers DNA.

3. Guarantee quality and traceability
The qualities of the fibers and yarns must meet the highest demands and their production must be traceable throughout the textile value chain. This no longer only plays an important role in the automotive industry, where safety is of paramount importance. Other branches of industry that use fibers, yarns and nonwovens also want to know where the raw materials they produce for consumer articles come from. Legal regulations are demanding this more and more frequently. Oerlikon offers optimal solutions with its DIN ISO certified manufacturing processes. More than half of the world's manmade fiber producers are convinced every day that the qualities produced on Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven equipment are right – and all visitors to ITMA can do the same on site.

4. Efficient and sustainable production
In the future, the materials produced from manmade fibers must become part of a further improved global recycling economy. The recycling of polyester – with over 80% market share the most frequently used manmade fiber in the world – has not only been on the agenda since today. Oerlikon already has solutions at hand: from PET bottles to fibers and filaments, to textiles and carpets. ITMA is the next step. With the VacuFil® Oerlikon in cooperation with the subsidiary company BBEngineering presents the world premiere No. 4 – a recycling solution within a running polyester production with a waste-free approach.

Vision becomes reality
The Oerlikon Manmade Fibers segment thus demonstrates what the ITMA in Barcelona promises as the world's leading trade fair for textile machinery and plant construction: "Innovating the world of textiles – sourcing for a sustainable future". In Hall 7, A101, this is already reality.

More information:
ITMA Oerlikon Fibers Automation
Source:

Oerlikon