From the Sector

The Board of Directors at INDA, Association of the Nonwoven Fabrics Industry, elevated Tony Fragnito from Chief Operating Officer of INDA to President of INDA effective May 31. Fragnito will assume the position currently held by Dave Rousse, who will become President Emeritus and provide support and assistance to Fragnito as needed until Rousse fully retires in January, 2023.

Fragnito joined INDA November 29, 2021 as Chief Operating Officer and has been leading INDA’s implementation of its new Strategic Plan, as well as updating INDA’s technology platform. This follows decades of leadership experience assisting trade and professional organizations in realizing their organizational and operational potential. A certified public accountant, Fragnito brings strong financial acumen in addition to extensive information technology, human resource and program management accomplishments from organizations representing a variety of professions and industries.  

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

1. Intense Needling
   Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
   Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
2. “Fibre Pulp Recycling”
   Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
   When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
3. Additive nonwoven production
   The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
4. “IsoFeed”-card feeding
   In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

With the wipes sector adapting to demands for products that protect consumers from COVID-related risks, industry experts will present the latest insights for moving forward post-pandemic at the World of Wipes® (WOW) International Conference.   

The shift from “clean” to “safe” in the world of wipes will be among the key topics thought-leading speakers will address at the in-person event, June 27-30, at the Marriott Marquis in Chicago.

The information-packed program will tackle timely topics to support decision making on the following key themes: Circular and Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends and Developments in Flushability Issues.

World of Wipes Session Highlights

• Lifestyle Shifts and the World of Wipes: Meeting the Changing Consumer Demand to Secure Growth – Liying Quian, Research Analyst, Euromonitor International will explore personal and beauty care trends based on consumer surveys that could shape wipes’ long-term performance
• The Supply Chain – Import Pressures Versus Domestic Manufacturing – Jacob Smith, Director, Supply Chain and Customer Care, Health, Hygiene, and Specialties Division, North America, Berry Global will share his expertise and experience on how COVID-19 has impacted domestic production and international sourcing of wipes
• Packaging Sustainability:  A Global Perspective – David Clark, Vice President of Sustainability, Amcor will look at how consumer brands, retailers and others are responding to consumer demand for more sustainable packaging and discuss progress and risks in the U.S. and other countries
• How Sustainable are You Willing to Be? New Technology to Support Use of Recycled Fiber Sources – Richard Knowlson, Principal, RPK Consulting will tackle the question of how new manufacturing technology can help produce more sustainable nonwoven substrates in today’s price-sensitive environment
• Dead Turtle Logos – What We Know So Far in the EU – Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC will share the latest learnings on the European Union’s Single Use Plastic Directive and the impact of the plastic-free packaging logos on consumer attitudes
• Challenges and Pitfalls of Scaling Up a Waste Cleaning Wipes Collection and Recycle System – Sergio Barbarino, Research Fellow, Fabric and Home Care Open Innovation, Procter & Gamble Distribution Company Europe will look at cleaning wipes’ potential to be recycled and become a convenient pioneering experimental platform
• Case Study: Surface Disinfection Incompatibility with Medical Devices Creates Potential Patient Risks – Caroline Etland, Ph.D., RN. CNS, ACHPN, Associate Professor, Hahn School of Nursing, BINR, University of San Diego will share real examples of the issues healthcare facilities face with surface disinfection incompatibility that make cleaning and disinfection a major challenge

In addition to the conference program, WOW 2022 also features two nights of tabletop displays and receptions; the presentation of the World of Wipes Innovation Award® and the INDA Lifetime Technical Achievement Award; and 11 hours of face-to-face engagement during a welcome reception, first-time attendee mentorship program, and breakfast connections. The event kicks off with the WIPES Academy, a 1.5-day value-added training opportunity on June 27-28.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres).

EDANA, the international Association serving the nonwovens and related industries today released its statistics on Nonwovens Production and Deliveries for 2021. Following the impressive growth recorded in 2020, the updated figures for Greater Europe (incl. Western and Eastern Europe countries, Turkey, Belarus, Russia and Ukraine) highlight again the ability of the European industry to innovate and to invest in order to meet the challenges of the pandemic crisis.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres). Since 2019, the European output increased by nearly 9%.

Jacques Prigneaux, EDANA’s Market Analysis and Economic Affairs Director commented “This 2% average growth is in line with European forecasts disclosed in October 2021 in our Global Nonwoven Markets 2020-2025 report. In 2021, significant growth areas for nonwovens were recorded in building construction (+17.4%), agriculture (+11.3%), electronic materials (+10.1%) and air filtration (+9.1%). Countering this, a further decline of -1% was recorded in automotive interior applications. In some market segments, a comparison with the pre-COVID situation is probably more relevant. This is particularly true in hygiene, medical and wipes nonwovens, which were almost flat or slightly decreasing compared to the level reached in 2020, but still much higher than in 2019”.

He added: “Looking at the different production processes of nonwovens, various trends were observed in 2021. The production of fiber-based materials, including Drylaid, Wetlaid, and Airlaid technologies, recorded divergent growth rates (respectively +2.4%, +1.1% and -4.8%), and spunmelt nonwovens recorded a growth rate of +3.1%. In Drylaid, the highest growth in tonnes was observed in needlepunched, with a 6.4% increase. The production of drylaid-hydroentangled, which peaked in 2020, was at the same level a year later”.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

At IDEA, the Groz-Beckert InLine card clothing series is the main focus of the product group Carding. Thanks to a new and patented production method, Groz-Beckert has developed a new range of metallic card clothing, which offers improved process reliability and increased up-time of the card for the nonwovens industry. At the same time, the new production method also reflects the corporate principles of environmentally-friendly and resource-saving production.

The card clothings are characterized by a controlled and very precise hardening of the teeth, a reduced rib height of 1.3 millimeters and  completely scale-free surfaces without burrs. An exhibit at the booth will highlight how this differs from conventional production methods. It shows an impressive comparison between the new Groz-Beckert InLine card clothing and the previous generation.

The SiroLock™ plus worker and doffer wire was developed as the first special geometry of the Groz-Beckert InLine card clothing series. In addition to the advantages of the Groz-Beckert InLine card clothings, the SiroLock™ plus impresses with a more effective fiber take-up, control and transfer. The functionality and operating principle behind the SiroLock™ plus can be experienced by IDEA visitors via Augmented Reality.

• Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event.  

All of the winners will be announced on March 30 at a ceremony at IDEA® from 9:30 a.m. to 10:30 a.m. moderated by Dave Rousse, President, INDA and Karen, McIntyre, Editor, Nonwovens Industry.

The INDA Technical Advisory Board, consisting of technical professionals from member companies, has narrowed the competition from more than 100 online nominations to the following 18 finalists selected for their leading innovations since the last IDEA show in 2019.

The industry will have the chance to select their top choices from the three finalists in each of the following six categories through the online voting process:

IDEA® Equipment Achievement Award

• ESC-8 – Curt G. Joa, Inc.
  Imagine endless combinations of insert and chassis designs for adult incontinence production at the push of a button. With patent-pending ESC-8™ Electronic Size Change Technology, JOA has addressed the need for automated product size change. The release of this industry-leading, first-of-a-kind technology gives customers the flexibility to configure endless insert and chassis combinations while maintaining higher production speeds and minimizing raw material usage. The ESC-8™ can be integrated into new and existing machines.
   
• Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
  Elastics are an integral component to many hygiene products. Imagine a diaper or incontinence product that is reliable, adhesive-free and extremely soft. Herrmann Ultrasonics Elastic Thread Anchoring (ETA) Sonotrode technology provides just that, in an industry first, easy-to-use closed-loop feedback manufacturing solution. The fixation of the elastic threads is accomplished with ultrasonic energy that offers a wide process window, without the need for tool changeovers, at processing speeds above 2,000 ft./min.
   
• Doffer Airlay Card – Technoplants SRL
  With airlaying suction and a doffing system like traditional roller cards, the Doffer Airlay Card makes it possible to produce carded webs with doffer in thicknesses from 10 to 1.500 gsm. With top and bottom suction, it can produce a partly carded and partly airlaid web. This card can comb, separate and make parallel all types of natural, synthetic and regenerated fibers for applications including hygiene, filtration, medical and gradient acquisition distribution layer (ADL).

IDEA® Raw Material Achievement Award

• sero™ premium hemp fiber – Bast Fibre Technologies Inc.
  sero™ 100 percent premium hemp fibers are the result of years of the company’s top-to-bottom supply chain experience. BFT’s proprietary processing technology is employed to carefully clean, individualize, and soften bast fibers that meet stringent nonwoven technical standards and are plastic-free, tree-free, and compostable. sero™ fibers are a plug-and-play replacement for plastic fibers that run seamlessly on major nonwoven platforms without compromising production speeds, efficiency, or uniformity.
   
• ODOGard – Rem Brands, Inc.
  Rem Brands, Inc.’s patented ODOGard® technology is a revolutionary advancement in odor elimination. This next-generation odor elimination mechanism works by covalent molecular bonding to malodors. Malodors are permanently attached to the ODOGard® molecule, changing them into non-odorous molecules forever. ODOGard® can be impregnated into pulp fluff and other kinds of media. Whether  malodors come from the air or from hygiene products, ODOGard® has it covered.
   
• SharoWIPES™ – Sharon Laboratories
  SharoWIPES™ by Sharon Laboratories, Israel, is a technological breakthrough from in-depth scientific research addressing industry needs for more “clean label, non-irritating, eco-friendly” consumer wet wipes. With their unique anti-biofilm mechanism, SharoWIPES™ offer dual protection from microbial contamination of both the wet wipe formula, as well as the non-woven fabric. SharoWIPES™ preservation systems deliver broad-spectrum protection at low levels contributing to wet wipe brand equity with free from, microbiome friendly, vegan and biodegradable claims.
   

IDEA® Short-Life Product Achievement Award

• MDP™ – Dermasteel, Ltd.
  MDP™ presents a breakthrough approach to restoring the quality of life for men experiencing bladder leakage. MDP™ is a revolutionary nonwoven product for men coping with light urinary incontinence that is invisibly discreet, effective, comfortable, and reliable. It features Body ID Technology™ for customized adjustment, variable elasticity strapping, self-reflexive side panels for unimpeded breathability, form-fitting to the unique characteristics of each man’s anatomy, and the smallest carbon footprint of any comparable male incontinence option.
   
• Organic 2.0 – Ellepot A/S
  In young plant propagation, plastic products are used in large quantities. Ellepot’s new paper is a game-changer supporting plastic exit strategies. During six years in development, Ellepot and Ahlstrom-Munksjö partnered with OrganoClick, the developer of special binders using organocatalysis, a field of chemistry awarded the Nobel Prize in 2021. The product is approved for organic crops in Germany, the UK, Denmark, The Netherlands, Sweden and Canada and certified okay home compostable and biodegradable in soil.
   
• LifeSavers Wipes – LifeSavers LLC
  LifeSavers Wipes are personal hygiene wipes that change color if they detect abnormal health indicators in the urine. The launch product is a diabetic wipe, which will change color if there are abnormal levels of glucose in the urine. The wipes are therefore triple purposed as they assist with personal hygiene after urinating, act as an early warning system, and serve as an instant glucose monitor. UTI and kidney disease wipes are next in line.
   

IDEA® Long-Life Product Achievement Award

• Canopy Hero Pro – Canopy
  Today’s reusable respirators are uncomfortable, limit communication, and can lose effectiveness after cleaning. Disposable options pose similar issues and generate waste. Canopy® has created a next-generation, reusable respirator for healthcare workers that’s comfortable, easy to clean, exceeds federal safety standards, has a transparent front to allow for improved communication, costs less than disposables, and can help save 7,200 tons of waste daily. Its patented, transparent, fully mechanical filter helps protect those who protect us.
   
• Long-Life Cellulose-based Nonwovens for Higher Performance in Reusable Baby Diapers – Kelheim Fibres GmbH and Sumo Diapers
  Innovation exemplified: the trend-setting Sumo Baby Cloth Diaper shows how needle-punched/thermobonded nonwovens find their way into reusable diapers, thanks to Kelheim Fibres’ specialty viscose fibers with adjusted cross-sections (trilobal and hollow). This technology pushes liquid management capabilities and the absorbency of washable hygiene products to new levels, creating a unique duality of high-performance and high-sustainability credentials, and opening up new fields of application.
   
• Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  MANN+HUMMEL has developed a hybrid media by combining electret-based spunbond and a pure mechanical filtration layer of ultrafine polymer fibers. The result: an outstanding separation of PM1 particles up to 95 percent, according to DIN EN ISO 16890. This technology enables stable filtration performance and long-term efficiency over the whole filter lifetime. The nanofiber layer can be combined with any cabin air filter media of the MANN+HUMMEL range, improving air quality in a vehicle’s cabin significantly.
   

IDEA® Sustainability Advancement Award

• Pureflow8 – In Flight Material Separator – Diaper Recycling Technology Pte. Ltd.
  New bolt-on additions to the company’s Generation 8 recycling platform guarantee increased performance in terms of material purity and work efficiency. While recovering up to 87 percent of diaper waste raw material’s financial investment, DRT pushes the boundaries further to meet sustainability targets and include active pulp scanning, fluidizing SAP re-gen technology, and gravimetric pulp refeed processes. DRT recognizes its teams and suppliers who have worked tremendously hard to complete this major milestone.
   
• Fitesa® 100 Percent BioBased Bico – Fitesa
  Fitesa® S Bico 100 percent BioBased PE/PLA is a technically sophisticated plant-sourced nonwoven that has been successfully applied in innovative baby diapers as topsheet, backsheet, and front ear components to deliver classic spunbond strength with good abrasion resistance and converting performance. It is responsibly sourced, PE soft, and sustainable, leaving a negative carbon footprint by reducing environmental CO2. It represents the next generation of hygienic nonwovens designed to make work easier and life better.
   
• Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  Finally, an alternative to metal and plastic screw caps! Blue Ocean Closures partnered with Glatfelter and ALPLA to accelerate and produce sustainable and environmentally-friendly packaging solutions. The companies optimized their use of renewable and recyclable wood fibers and airlaid materials by creating paper-based screw caps that are durable, strong, and water-resistant. The method of proprietary vacuum press forming allows for low production cost and high scalability.
   

IDEA® Nonwoven Product Achievement Award

• Sontara® Silk – Glatfelter Corp.
  Sontara® Silk perfectly fits facial contour, is luxurious on the skin, and has a minimal environmental impact. When infused with lotion, these masks have enhanced elasticity, conform closely to the skin, and have excellent adhesion. Sontara® Silk has superior translucency and ensures even penetration of active ingredients onto the skin. Sontara® Silk fabric is manufactured with premium fibers derived from natural raw material. These sustainable materials allow the product to be biodegradable and compostable.
   
• HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  Suominen’s latest moist tissue product, HYDRASPUN® Aquaflo achieves dry tissue dispersibility through a proprietary blend of 100 percent sustainable cellulosic materials, minimizing environmental impact. This flushable nonwoven has a premium hand feel for a luxurious consumer experience. In addition, it passes dispersibility standards set by INDA (GD4) and the International Water Services Flushability Group (IWSFG.) HYDRASPUN® Aquaflo is produced in Europe and North America and represents multi-year development and market insights to deliver a personal care product ideal for today’s consumer.
   
• LS SAF™ Nonwoven Fabrics –Technical Absorbents
  Technical Absorbents developed a new grade of Low Shrink (LS) superabsorbent fiber (SAFTM) for use within a new range of nonwovens that are more resistant to shrinkage. The new LS SAFTM fiber and resulting fabrics were developed in response to demand from the medical industry for a superabsorbent nonwoven suitable for use in advanced wound pad dressings. The new fiber was engineered to be capable of withstanding the moisture used in the EtO sterilization process.

Moving forward after this year, the IDEA® Achievement Award will be presented every two years under the new cycle announced for the event with the subsequent IDEA® taking place April 23-25, 2024.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.