From the Sector

Reset
15 results
12.11.2021

Stahl to set Scope 3 carbon emission targets by mid 2022

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Michael Costello, Stahl Group ESG Director: “Only by focusing on reducing Scope 3 emissions can we accurately align our de-fossilization strategy with the global goal of limiting global average temperature increase to 1.5°C, as agreed at the 2015 Paris Climate Agreement and the COP26 in Glasgow. We look forward to working with partners across our industry and value chain to make this happen.”

More information:
Stahl Stahl Group
Source:

Stahl Holdings B.V.

(c) Fibre Extrusion Technology
11.11.2021

FET hails INDEX20 impact

Fibre Extrusion Technology, UK is celebrating a successful INDEX20 nonwovens exhibition in Geneva, Switzerland, which closed on 22 October. Although the company has a long history in supplying meltspinning equipment for the nonwovens sector, this represents its first venture at a dedicated nonwovens show.
 
FET’s Managing Director, Richard Slack explains. “Techtextil and ITMA have previously been our main exhibitions of choice, but INDEX20 was an ideal vehicle for FET to launch our new laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers.”
 
FET already has spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions. The growth in global nonwovens technology, partly driven by demand for pandemic-related materials, is forecast to continue.
 

Fibre Extrusion Technology, UK is celebrating a successful INDEX20 nonwovens exhibition in Geneva, Switzerland, which closed on 22 October. Although the company has a long history in supplying meltspinning equipment for the nonwovens sector, this represents its first venture at a dedicated nonwovens show.
 
FET’s Managing Director, Richard Slack explains. “Techtextil and ITMA have previously been our main exhibitions of choice, but INDEX20 was an ideal vehicle for FET to launch our new laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers.”
 
FET already has spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions. The growth in global nonwovens technology, partly driven by demand for pandemic-related materials, is forecast to continue.
 
“We were delighted with the response at INDEX”, continued Richard Slack. “There was considerable interest shown in the new spunbond system and its potential for lab scale innovation. It’s clear that the industry is seeking new alternatives to synthetics at the moment, and our technology is able to assist with the testing and assessment of many of the new feedstocks being pioneered in this extremely inventive sector, where everyone is suddenly talking and cooperating with everyone else, regardless of whether they are generally competitors. We recorded in excess of 20 serious enquiries from totally new contacts and sectors, including blue chip companies in the hygiene, medical and packaging industries.”
 
“There were initial concerns about projected attendance figures, especially from China and USA companies, but we experienced good footfall from key decision makers, especially those from Europe. It was encouraging to at last experience the opportunity for face-to-face contact with old and new customers on a large scale and we are now starting to reap the benefits with enquiries continuing to flow in”.

Source:

Fibre Extrusion Technology

© ITM / TU Dresden
10.11.2021

Kreativitätspreis des Deutschen Textilmaschinenbaues 2021 geht an Irina Kuznik

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Frau Dipl.-Ing. Irina Kuznik vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaues 2021 für ihre exzellente Diplomarbeit „Entwicklung zur umweltfreundlichen Herstellung neuartiger Chitosanfasergarne unter Einsatz von ionischen Flüssigkeiten" ausgezeichnet.

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Frau Dipl.-Ing. Irina Kuznik vom Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden wurde mit dem 3.000 EUR dotierten Kreativitätspreis des Deutschen Textilmaschinenbaues 2021 für ihre exzellente Diplomarbeit „Entwicklung zur umweltfreundlichen Herstellung neuartiger Chitosanfasergarne unter Einsatz von ionischen Flüssigkeiten" ausgezeichnet.

In ihrer Diplomarbeit entwickelte Frau Kuznik einen völlig neuen Ansatz zur ökologischen und ökonomischen Herstellung von Chitosangarnen. Unter Nutzung ionischer Flüssigkeiten als gut geeignetes, neuartiges Lösungsmittel für Chitosan lässt sich Chitosan mit geringen Deacetylierungsgraden sowie reines Chitin erfolgreich auflösen. In einem Nassspinnverfahren können damit erzeugte Spinnlösungen zu neuartigen Chitosan- bzw. Chitinmonofilamenten mit sehr guten morphologischen Eigenschaften hergestellt werden. Des Weiteren lässt sich die ionische Flüssigkeit mittels eines Verdampfungsverfahrens aus dem Abwasser zurückgewinnen und wiederaufbereitet werden.

More information:
VDMA Textilmaschinen chitosan
Source:

Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

(c) ITM/TU Dresden
10.11.2021

Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 an Dr.-Ing. Martin Hengstermann

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Dr.-Ing. Martin Hengstermann wurde mit dem mit 5.000 EUR dotierten Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 für seine am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden erarbeiteten Dissertation „Entwicklung von Hybridgarnen aus recycelten Carbonfasern und Polyamid 6-Fasern für thermoplastische Verbundbauteile mit hohem Leistungsvermögen“ geehrt.

Die Verleihung der Förder- und Kreativitätspreise 2021 der Walter Reiners-Stiftung des VDMA, Fachverband Textilmaschinen an Studierende und Nachwuchswissenschaftler:innen deutscher Universitäten für Spitzenleistungen in Studium und Promotion fand am 09. November 2021 im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference 2021 statt. Die bundesweit ausgeschriebenen Förder- und Kreativitätspreise wurden erneut online durch Herrn Peter D. Dornier, Vorstandsvorsitzender der Walter Reiners-Stiftung, verliehen.

Dr.-Ing. Martin Hengstermann wurde mit dem mit 5.000 EUR dotierten Förderpreis beste Dissertation des Deutschen Textilmaschinenbaues 2021 für seine am Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik der TU Dresden erarbeiteten Dissertation „Entwicklung von Hybridgarnen aus recycelten Carbonfasern und Polyamid 6-Fasern für thermoplastische Verbundbauteile mit hohem Leistungsvermögen“ geehrt.

Gegenstand der Dissertation ist die Entwicklung und Umsetzung von neuartigen Hybridgarnen aus recycelten Carbonfasern (rCF) und Polyamid (PA) 6-Fasern für thermoplastische Verbundbauteile. Diese Hybridgarne können die hervorragenden mechanischen Eigenschaften der rCF im Gegensatz zu bisherigen Lösungen in hohem Maße ausnutzen. Bedingt durch deren spezielle Fasereigenschaften (insbesondere hohe Querkraftempfindlichkeit, Sprödigkeit und fehlende Kräuselung) wurde dafür die Prozesskette der konventionellen Stapelfasergarnherstellung, bestehend aus Krempel, Strecke und Flyer, umfangreich analysiert und technologisch-konstruktiv weiterentwickelt, wodurch erstmalig eine schonende und gleichmäßige Herstellung der Hybridgarne ermöglicht werden konnte.

Source:

Technische Universität Dresden
Institut für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM)

(c) Picanol. Connect generation - PicConnect enabled (BlueTouch display).
Connect generation - PicConnect enabled (BlueTouch display)
08.11.2021

Picanol: New Connect generation of airjet and rapier weaving machines

Picanol has introduced its latest generation of airjet and rapier weaving machines, which have been called the “Connect” generation. These new generation weaving machines focus on connectivity and an increased level of data availability. With this new generation, Picanol is launching several new functionalities such as a digitalized Gripper stroke setting, Gripper tape monitoring, Climate control, Shed angle measurement, and fully integrated Power monitoring.

Picanol has introduced its latest generation of airjet and rapier weaving machines, which have been called the “Connect” generation. These new generation weaving machines focus on connectivity and an increased level of data availability. With this new generation, Picanol is launching several new functionalities such as a digitalized Gripper stroke setting, Gripper tape monitoring, Climate control, Shed angle measurement, and fully integrated Power monitoring.

“Following the successful launch of our digital platform PicConnect earlier this month, we have now released a new generation of weaving machines, which are known as the Connect generation. Our Connect generation weaving machines can provide the correct data and are loaded with new and never-before-seen functionalities. This is clear proof that for Picanol “Driven by Data” is not just a slogan but a commitment. Not only have these innovations allowed us to make big improvements when it comes to our four design principles – Smart Performance, Sustainability Inside, Intuitive Control, and, of course, Driven by Data – but when combined with our new digital platform they will allow you to amplify your own intuition.” comments Johan Verstraete, Vice President Weaving Machines.

From now on, the range of Picanol weaving machines will have the “Connect” suffix. For the airjet weaving machines, this means: OmniPlus-i Connect and TerryPlus-i Connect, while for the rapier weaving machines, this means: OptiMax-i Connect and TerryMax-i Connect. These new machines are built around Picanol’s four main design principles:

Smart Performance
On the OptiMax-i Connect, Picanol has introduced a lubrication monitoring sensor in combination with a temperature sensor. The combined data they provide allow the user to make sure the gripper tapes are in optimal condition for maximum performance. As an option, a gripper stroke measurement sensor is also available. This not only dramatically simplifies the setting of the gripper stroke, but also enables the user to realize higher machine speeds when weaving reduced widths – a pure extra output combined with more user-friendliness.

Sustainability Inside
Even though it was 25 years ago that the Sumo Drive concept was launched, it remains the most powerful, versatile and energy friendly machine drive available. And it has been even further optimized. It features an optimized sheet metal package for lower energy consumption, optimized oil cooling circuit for a better performance and a built-in temperature monitoring. Moreover, the Connect machines can be equipped with a Power monitoring module, which allows the user to keep track of the power consumption of each machine over time. Every Connect machine also has a built-in ambient temperature and humidity sensor, which will help to optimize the climate control in the weaving shed at the lowest cost. And as raw material is the biggest cost factor, each machine can also be equipped with raw material use monitoring.

Driven by Data
As the machine has more sensors than ever before, it also generates more data. To enable a fast reaction to all these sensor data, the BlueBox control unit has been further optimized: better heat management guarantees short reaction cycles combined with the long lifetime of components. To have a good view of all of the data generated, a special sensor dashboard screen is available in the BlueTouch display: with a simple touch of the screen, the current and historical power consumption, temperature, humidity, material consumption, and – on the OmniPlus-i Connect – also the air consumption, can be monitored. The BlueTouch display is now also equipped with an Action center, an electronic logbook where all actions such as maintenance interventions can be logged or scheduled beforehand. The machine manual is now available on the BlueTouch display, and with the context-based help function the help pages related to the operation the user wants to perform appear with one touch of his/her fingertip. The built-in web browser even allows the user even to consult, for example, tutorial videos on the web to guide them through a setting procedure.

Intuitive Control
The Connect generation was designed to focus on what really matters: weave the highest possible grade A fabrics at minimal costs. A large set of tools have been installed to facilitate this goal. One of the most remarkable ones is the Harness frame stroke measurement – until recently, it was only available on the revolutionary SmartShed, but it is now also available on the cambox and dobby machines. Combined with the shed visualization and simulation, it offers a quantum leap in terms of optimizing the user’s shed settings without losing any time or taking any risks. The colors of the programmable Smart signal lights with stop timing functionality are now repeated around the push buttons, allowing even better visibility and the prioritization of interventions by the weaver. A full-fledged Access control system not only limits the access to certain pages and settings depending on the user, but also allows a tailored dashboard to be established for each user profile.

Source:

Picanol

14.09.2021

Kornit Digital: 2020 Impact and Environmental, Social, and Governance Report released

Kornit Digital Ltd., a worldwide market leader in digital textile production technologies, released its 2020 Impact and Environmental, Social, and Governance (“ESG”) Report. This inaugural report affirms Kornit’s commitment to achieving specific ESG goals. This includes the way Kornit conducts business, creates meaningful impact in local communities, and achieves environmental sustainability, in addition to how Kornit will continue to build a diverse and inclusive company culture, foster employee growth and development, and empower fair and safe labor practices globally.
 

Kornit Digital Ltd., a worldwide market leader in digital textile production technologies, released its 2020 Impact and Environmental, Social, and Governance (“ESG”) Report. This inaugural report affirms Kornit’s commitment to achieving specific ESG goals. This includes the way Kornit conducts business, creates meaningful impact in local communities, and achieves environmental sustainability, in addition to how Kornit will continue to build a diverse and inclusive company culture, foster employee growth and development, and empower fair and safe labor practices globally.
 
In addition to enabling eco-friendly production processes with technology and consumables that use less water, reduce waste, and minimize the carbon footprint, Kornit technology solutions enable sustainable production on demand, which eliminates overproduction of apparel and other textile goods. A 2021 Life Cycle Assessment conducted on two flagship products, the Kornit Atlas MAX and Kornit Presto S, demonstrated that relative to traditional analog processes, Kornit’s digital production systems used up to 95% less water and 94% less energy, and produced up to 83% less greenhouse gas (GHG) emissions for the Presto S system and up to 93% less water and 66% less energy, and produced up to 82% less greenhouse gas (GHG) emissions for the Atlas MAX system.


Based on this study, in addition to past sustainability performance results and strategic projections for business growth and market expansion, by 2026 Kornit Digital’s sustainable on-demand solutions are expected to enable the production of approximately 2.5 billion apparel items in a responsible manner to deliver:

  • Zero overproduction: By moving the industry to on-demand manufacturing, Kornit will help eliminate the estimated 1.1 billion apparel items overproduced using traditional production methods, based on an industry average of 30% overproduction. This is about 1 apparel item for each and every person living in Europe and North America – saved.
  • Zero water waste: In addition to eliminating overstocks, Kornit-enabled production on demand will support saving an estimated 4.3 trillion liters (1.1 trillion gallons) of water. This is the estimated amount of drinking water needed for the entire U.S. population for 11 years.
  • Reduced CO2 emissions: By enabling sustainable on-demand production, consuming less energy, and generating less waste, Kornit will prevent an estimated 17.2 billion kilograms (37.9 billion pounds) of greenhouse gas emissions, compared to traditional manufacturing methods. This is equivalent to the estimated amount of carbon dioxide emitted from circumnavigating the entire planet with a car nearly 2,400 times.

Furthermore, the report outlines Kornit’s commitment to achieving KPIs that address waste, chemicals, GHG emissions, energy, product development, employee training, diversity and inclusion, and the company’s supply chain.

Source:

pr4u

B.I.G. YARNS awarded HPR status for second European plant © Beaulieu International Group
B.I.G. YARNS awarded HPR status for second European plant.
07.09.2021

B.I.G. YARNS awarded HPR status for second European plant

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

Photo: Sateri
26.08.2021

EU-BAT Compliance Confirmed for all Sateri Viscose Fibre Mills

  • Achievement Ahead of Schedule

All of Sateri’s five viscose mills in China are now fully compliant with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) on Polymers, following recent verification of Sateri Jiangsu and Sateri China mills.

Verified by independent consultant Sustainable Textile Solutions (STS), a division of BluWin Limited (UK), the parameters assessed included resource utility efficiency, wastewater discharge and air emission.

Allen Zhang, President of Sateri said, “Sateri Jiangsu was established in 2019 following an acquisition while Sateri China was built in the same year. We had aimed to have both mills meet EU-BAT’s recommended emission levels by 2023. To achieve this two years ahead of schedule underscores our continuous efforts in process improvement and control of pollutant emissions, and resource utilization efficiency. We will continue to pursue manufacturing excellence and invest in best-in-class technologies for all our mills – existing, acquired, and newly constructed ones – as part of our Vision 2030 commitment towards closed-loop and cleaner production.”

  • Achievement Ahead of Schedule

All of Sateri’s five viscose mills in China are now fully compliant with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) on Polymers, following recent verification of Sateri Jiangsu and Sateri China mills.

Verified by independent consultant Sustainable Textile Solutions (STS), a division of BluWin Limited (UK), the parameters assessed included resource utility efficiency, wastewater discharge and air emission.

Allen Zhang, President of Sateri said, “Sateri Jiangsu was established in 2019 following an acquisition while Sateri China was built in the same year. We had aimed to have both mills meet EU-BAT’s recommended emission levels by 2023. To achieve this two years ahead of schedule underscores our continuous efforts in process improvement and control of pollutant emissions, and resource utilization efficiency. We will continue to pursue manufacturing excellence and invest in best-in-class technologies for all our mills – existing, acquired, and newly constructed ones – as part of our Vision 2030 commitment towards closed-loop and cleaner production.”

Chen Xinwei, Chairman of China Chemical Fiber Industry Association, said, "China's regenerated cellulose fibre industry has been progressing steadily in recent years. As a major viscose manufacturer, Sateri has demonstrated leadership in benchmarking itself against advanced domestic and international standards, focusing on low-carbon development, energy-saving and emission-reduction technology, and cleaner production to advance sustainable development, as well as enhance the company’s competitiveness. All other players in the industry should be encouraged to follow suit."

Sateri is a member of the RGE group of companies; Sateri’s other three mills - Sateri Fujian, Sateri Jiujiang and Sateri China (Jiangxi) - had attained EU-BAT compliance in 2020.

Source:

Omnicom Public Relations Group

3D-Lofter. Photo: (c) DiloGroup
26.08.2021

DiloGroup at INDEX

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

More information:
DiloGroup Dilo INDEX
Source:

DiloGroup

26.07.2021

WEKO has taken over RotaSpray GmbH

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Source:

Weitmann & Konrad GmbH & Co. KG

15.07.2021

Rieter: First half of 2021

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

Crisis management in the pandemic year of 2020 was aimed at protecting employees, fulfilling customer commitments, ensuring liquidity, and also strengthening the market position for the time after the pandemic as well as retaining the ability to benefit from the incipient market recovery.

The focus for 2021 remains on the implementation of this strategy. The measures for crisis management relating to the protection of employees and fulfilling customer commitments are still in effect in countries that continue to be affected by the pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter

(c) Groz-Beckert KG
07.07.2021

Groz-Beckert at ITMA Asia: “complete success”

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

More information:
Groz-Beckert ITMA Asia + CITME
Source:

Groz-Beckert KG

Swiss Textile Machinery companies at ITMA Asia + CITME (c) 2021, Swissmem
Impression from ITMA Asia + CITME 2020
18.06.2021

Swiss Textile Machinery companies at ITMA Asia + CITME

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

  • Bräcker
  • Graf
  • Hunziker
  • Loepfe
  • Luwa
  • Polytex
  • Rieter
  • Santex Rimar
  • Sedo Engineering
  • SSM
  • Stäubli
  • Uster
  • Willy Grob
OERLIKON: Largest staple fiber plant order in the company's history (c) Oerlikon Textile GmbH & Co. KG
Shen Jianyu, Chief Executive Officer of Xinfengming Group Co. together with Oerlikon Manmade Fibers Solutions Sales Director Felix Chau and Sales Manager Wang Xiaoxin at the signing of the contract for eight new staple fiber lines from Oerlikon Neumag.
15.06.2021

OERLIKON: Largest staple fiber plant order in the company's history

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.

11.06.2021

EFI Reggiani introduces Textile Digital Printer

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

  • A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
  • Several printing modes to ensure maximum flexibility in terms of design capability
  • New, real-time image processing that eliminates time spent in image pre-calculations
  • A user friendly, intuitive interface
  • A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.