From the Sector

Reset
17 results
19.12.2023

New sustainability label Autoneum Blue

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

With its new sustainability label Autoneum Blue, Autoneum combines the use of recycled materials with protecting the oceans and social responsibility. Autoneum Blue is a continuation of the LABEL blue by Borgers®, which was originally launched by Borgers Automotive. Following the acquisition of the German automotive supplier in April 2023, Autoneum has now fully integrated the label into its sustainable product portfolio.

Marine pollution has reached alarming levels in recent decades, with plastic contamination posing one of the most harmful threats to the health of the world’s largest ecosystem. In light of ever-stricter legal requirements for the environmental performance of vehicles, especially regarding the recycled content of components and their end-of-life recyclability, the reduction and recycling of plastics is also one of the key challenges for the automotive industry. Autoneum Pure, the Company’s sustainability label for technologies with an excellent sustainability performance throughout the product life cycle, is already successfully helping customers to tackle these challenges. With Autoneum Blue, Autoneum is now expanding its sustainable product portfolio with a label for components that combine the use of recycled material with protecting the oceans and social responsibility.

In order to qualify for the Autoneum Blue label, components must be based on materials that consist of at least 30% recycled PET that was collected from coastal areas within a 50-kilometer range of the water. These credentials mean the products make an important contribution to preventing plastic pollution in the oceans. In addition, the process of collecting the PET bottles must be socially respon-sible and comply with human rights, and traceable procurement of the bottle flakes must be guaran-teed. Autoneum Blue thus complements the Company’s strategic target to continuously reduce water consumption in all areas of its operations with an additional focus on preventing plastic pollution of the oceans.

Autoneum currently offers selected wheelhouse outer liners, needlepunch carpets and trunk side trim under the Blue label. In principle, however, the label could be extended to any product based on Autoneum technologies that feature recycled polyester fibers. As an addition to Autoneum’s existing fully recyclable monomaterial polyester constructions, which are characterized by waste-free production and have a significantly lower carbon footprint compared to products made from virgin fibers, Autoneum Blue presents another example of the Company’s ongoing efforts and continuous strides towards a sustainable circular economy.

Source:

Autoneum Management AG

Propylat-Technologie Photo Autoneum Management AG
08.12.2023

Optimized acoustic performance thanks to sustainable technology with high recycled content

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

Autoneum’s sustainable, textile and lightweight Propylat technology reduces both interior and exterior noise of vehicles. Propylat was originally developed by Borgers Automotive, which was acquired by Autoneum in April 2023. The versatile technology is characterized by a flexible material composition of natural and synthetic fibers with a high recycled content and contributes to significant waste reduction thanks to its complete vertical integration. In addition, the fully recyclable technology variant Propylat PET is now part of the sustainability label Autoneum Pure.

The ongoing electrification of mobility as well as increasingly strict regulatory requirements for vehicle performance in terms of sustainability and acoustics are presenting new challenges to car manufacturers worldwide. With Propylat, Autoneum now offers another lightweight, fiber-based and versatile technology whose sound-insulating and -absorbing properties as well as high content of recycled materials help customers address these challenges. Propylat-based products not only contribute to reducing pass-by noise and improving driver comfort, but they are also up to 50 percent lighter than equivalent plastic alternatives; this results in a lower vehicle weight and, consequently, less fuel and energy consumption as well as lower CO2 emissions.

Autoneum's innovative Propylat technology consists of a mixture of recycled synthetic and natural fibers – the latter include cotton, jute, flax or hemp, for example – that are consolidated using thermoplastic binding fibers without adding any further chemical binders. Thanks to the flexible fiber composition and the variable density and thickness of the porous material, the properties of the respective Propylat variant, for example with regards to acoustic performance, can be tailored to individual customer requirements. This allows for a versatile application of the technology in a variety of interior and exterior components such as wheelhouse outer liners, trunk trim, underbody systems and carpets. For instance, Propylat-based wheelhouse outer liners significantly reduce rolling noise both inside and outside the vehicle while at the same time offering optimum protection against stone chipping and spray water.

In terms of sustainability, Propylat always contains a high proportion of recycled fibers – up to 100% in some variants – and can be manufactured with zero waste. Thanks to the full vertical integration of Propylat and Autoneum’s extensive expertise in recycling processes, the technology also contributes to a further significant reduction in production waste. Moreover, the Propylat PET technology variant, which consists of 100% PET, of which up to 70% are recycled fibers, is fully recyclable at the end of product life. For this reason, Propylat PET has been selected for Autoneum Pure – the Company’s sustainability label for technologies with excellent environmental performance throughout the product life cycle – where it will replace the current Mono-Liner technology going forward.

Propylat-based components are currently available in Europe, North America and China.

Source:

Autoneum Management AG

15.11.2023

Autoneum: EcoVadis gold medal for sustainability

Autoneum Holding Ltd has been awarded the gold medal in the 2023 EcoVadis sustainability rating, ranking the automotive supplier in the top 5% of companies assessed. Following a silver medal the previous year, the Company was able to further improve the overall rating of its sustainability performance in the four categories Environment, Labor and Human Rights, Ethics and Sustainable Procurement and achieved the second-highest recognition level.

Autoneum Holding Ltd has been awarded the gold medal in the 2023 EcoVadis sustainability rating, ranking the automotive supplier in the top 5% of companies assessed. Following a silver medal the previous year, the Company was able to further improve the overall rating of its sustainability performance in the four categories Environment, Labor and Human Rights, Ethics and Sustainable Procurement and achieved the second-highest recognition level.

As part of its commitment to transparency towards its stakeholders and the public at large, Autoneum reports regularly on its key developments and achievements in the area of Corporate Social Responsibility (CSR). In addition to reporting in line with the Global Reporting Initiative (GRI) standards, Autoneum uses external platforms such as EcoVadis – a globally recognized sustainability rating agency – to assess the quality of its sustainability management system. EcoVadis uses 21 criteria based on international CSR standards to rate companies in four categories: Environment, Labor and Human Rights, Ethics and Sustainable Procurement. Since its foundation in 2007, EcoVadis has assessed the sustainability performance of more than 100 000 companies from 175 countries.

In the 2023 sustainability rating by EcoVadis, Autoneum achieved gold medal status for the first time, placing it in the top 5% of companies assessed. Having already been awarded the EcoVadis silver medal in 2022, Autoneum thus moved up to the second-highest recognition level in this year’s rating, thanks to significant progress in the Environment and Labor and Human Rights categories.

More information on Autoneum’s sustainable products and processes can be found in the current issue of the Corporate Responsibility Report.

Source:

Autoneum Holding AG

06.09.2023

Autoneum joins the United Nations Global Compact initiative

Autoneum has joined the worldwide United Nations (UN) Global Compact initiative for corporate sustainability. The Group is thus committed to acting responsibly in accordance with the principles of the UN Global Compact in the areas of human rights, labor, environmental protection and anti-corruption. By joining the world's largest initiative for sustainable business – the UN Global Compact sponsored by the United Nations –, Autoneum is strengthening its commitment to sustainable corporate development at its sites worldwide. Launched in 2000, the UN Global Compact brings together more than 13 000 members in 162 countries.

Autoneum has joined the worldwide United Nations (UN) Global Compact initiative for corporate sustainability. The Group is thus committed to acting responsibly in accordance with the principles of the UN Global Compact in the areas of human rights, labor, environmental protection and anti-corruption. By joining the world's largest initiative for sustainable business – the UN Global Compact sponsored by the United Nations –, Autoneum is strengthening its commitment to sustainable corporate development at its sites worldwide. Launched in 2000, the UN Global Compact brings together more than 13 000 members in 162 countries.

More information:
Autoneum UN Gobal Compact
Source:

Autoneum Management AG

Photo Autoneum
15.08.2023

Autoneum’s Re-Liner nominated as finalist for 2023 PACE Award

Using recovered resin from discarded car bumpers, Autoneum’s sustainable Re-Liner technology transforms a previously unusable waste product into lightweight and durable wheelhouse outer liners. In addition to their high recycled content, the eco-friendly components require significantly less energy to produce than conventional alternatives. The innovation presents another important step towards a more sustainable circular economy and has now been nominated for the 2023 PACE Award.

Autoneum has been selected as one of the finalists for the 2023 Automotive News PACE Awards. Entering its 29th year, this prestigious award honors superior innovation, technological advancement and business performance among automotive suppliers.

Using recovered resin from discarded car bumpers, Autoneum’s sustainable Re-Liner technology transforms a previously unusable waste product into lightweight and durable wheelhouse outer liners. In addition to their high recycled content, the eco-friendly components require significantly less energy to produce than conventional alternatives. The innovation presents another important step towards a more sustainable circular economy and has now been nominated for the 2023 PACE Award.

Autoneum has been selected as one of the finalists for the 2023 Automotive News PACE Awards. Entering its 29th year, this prestigious award honors superior innovation, technological advancement and business performance among automotive suppliers.

Re-Liner is based on a core of polyolefins recovered from post-consumer bumpers and has a textile top layer made of fibers from recycled materials. “Autoneum has recognized the untapped potential of recovered resin from automotive bumper covers as a resource and is giving this former waste product a second life,” explained Dan Moler. “The core resin of Re-Liner is 100% automotive post-consumer recycled material, not just a filler or additive to a virgin material. Lightweight, durable, and sustainable wheelhouse outer liners based on this technology are expected to reduce waste generated by bumper covers by nearly one million kilograms in 2023.”

For more than a quarter century of a century, the PACE Award has honored innovations driven by automotive suppliers. The award is known in the global automotive industry for identifying and recognizing the latest game-changing innovation: from the plant floor to the product to the showroom. In 2000, Autoneum (then Rieter Automotive) already received a PACE Award for its Ultra-Light technology. In addition, two of the Company’s technologies have also been nominated as finalists in the past: Ultra-Silent in 2010 and Theta-Fiber in 2012.

More information:
Autoneum Re-Liner PACE award
Source:

Autoneum

(c) Autoneum
16.06.2023

Autoneum: Sustainable sound absorption for underbody shields

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Autoneum's Ultra-Silent Tune technology owes its sound-absorbing performance to acoustic chambers of different shapes and sizes. The chambers are created by applying an embossed polyester foil to the side of the Ultra-Silent underbody shield facing away from the noise source: they capture the sound waves emitted by the car tires, modulate them according to their respective geometry and reflect them back onto the porous carrier material. Compared to conventional single-layer underbody shields, whose acoustic performance is mainly determined by the noise-reducing properties of the product side facing the tires, Ultra-Silent Tune exploits both sides of the component, which significantly improves its acoustic absorption. Autoneum thus makes innovative use of the proven concept of traditional chamber absorbers, reducing exterior tire rolling noise.

Moreover, Ultra-Silent Tune combines optimized acoustic performance with the sustainability benefits of Autoneum's Pure technology Ultra-Silent. In addition to the high proportion of recycled PET fibers, underbody shields made from Ultra-Silent Tune can be manufactured from 100% polyester and thus be fully recycled at the end of vehicle life. Furthermore, the thickness of the multilayer construction can be flexibly adapted to the packaging spaces of different vehicle models. Underbody shields made from Autoneum's new Ultra-Silent Tune technology are already in pre-development at various vehicle manufacturers in Europe.

Source:

Autoneum Management AG

Foto Pixabay
24.03.2023

Autoneum veröffentlicht Corporate Responsibility Report 2022

Autoneum erzielte 2022 weitere messbare Fortschritte in den Bereichen Umwelt, Soziales, Governance und Compliance. Das Unternehmen verpflichtete sich zu wissenschaftlich fundierten Zielen, die im Januar 2023 von der «Science Based Targets»- Initiative (SBTi) validiert wurden. Die Ziele stehen im Einklang mit denen des Pariser Abkommens, die globale Erwärmung auf deutlich unter 2°C zu begrenzen, und unterstützen die bereits in der «Advance Sustainability»-Strategy verankerten Umweltziele von Autoneum. Im Berichtsjahr wurden die Treibhausgasemissionen weiter reduziert und die Recyclingkapazitäten global ausgebaut.

Trotz der zahlreichen Herausforderungen, mit denen die Automobilindustrie auch im vergangenen Jahr konfrontiert war, konnte das Unternehmen, seine gesamten Treibhausgasemissionen im Vergleich zum Basisjahr 2019 relativ um 14.8% und absolut um 33% zu senken. In 37 Autoneum-Werken weltweit wurden 214 Ökoeffizienz-Projekte zur Reduzierung von Abfällen sowie des Energie- und Wasserverbrauchs durchgeführt, womit sich die Anzahl solcher Projekte im Vergleich zu den Vorjahren fast verdreifachte.

Autoneum erzielte 2022 weitere messbare Fortschritte in den Bereichen Umwelt, Soziales, Governance und Compliance. Das Unternehmen verpflichtete sich zu wissenschaftlich fundierten Zielen, die im Januar 2023 von der «Science Based Targets»- Initiative (SBTi) validiert wurden. Die Ziele stehen im Einklang mit denen des Pariser Abkommens, die globale Erwärmung auf deutlich unter 2°C zu begrenzen, und unterstützen die bereits in der «Advance Sustainability»-Strategy verankerten Umweltziele von Autoneum. Im Berichtsjahr wurden die Treibhausgasemissionen weiter reduziert und die Recyclingkapazitäten global ausgebaut.

Trotz der zahlreichen Herausforderungen, mit denen die Automobilindustrie auch im vergangenen Jahr konfrontiert war, konnte das Unternehmen, seine gesamten Treibhausgasemissionen im Vergleich zum Basisjahr 2019 relativ um 14.8% und absolut um 33% zu senken. In 37 Autoneum-Werken weltweit wurden 214 Ökoeffizienz-Projekte zur Reduzierung von Abfällen sowie des Energie- und Wasserverbrauchs durchgeführt, womit sich die Anzahl solcher Projekte im Vergleich zu den Vorjahren fast verdreifachte.

Das Unternehmen konnte mit der Einführung seiner vollständig rezyklierbaren Teppichsysteme aus 100% Polyester, die auf bestehenden und besonders umweltfreundlichen Pure-Technologien aufbauen, seine Position als Markt- und Technologieführer im nachhaltigen Akustik- und Wärmemanagement für Fahrzeuge weiter ausbauen. Für die innovativen Tuftingteppichsysteme hat Autoneum erste Kundenaufträge erhalten. Auch für E-Motor-Kapselungen auf Basis seiner patentierten, lärmreduzierenden Pure-Technologie Hybrid-Acoustics PET wurden weitere Aufträge gewonnen.

Autoneum hat 2022 das erste unternehmensweite Frauennetzwerk ins Leben gerufen. Ziel des Netzwerks ist es, die Gleichstellung der Geschlechter und eine Kultur der Vielfalt und Inklusion bei Autoneum zu fördern und Mitarbeitenden einen regionen- und funktionsübergreifenden Austausch zu Themen wie Karriereentwicklung, Führung und Vereinbarkeit von Beruf und Familie zu ermöglichen. Darüber hinaus haben Mitarbeitende von Autoneum 2022 weltweit 67 Projekte zur Förderung des gesellschaftlichen Engagements durchgeführt.

Im Berichtsjahr legte Autoneum zudem einen besonderen Fokus auf den Ausbau der Corporate-Responsibility-Organisation im gesamten Unternehmen. Darüber hinaus wurde der Verwaltungsrat stärker in die entsprechenden Prozesse eingebunden. Mit der Aufnahme von Zielkriterien aus den Bereichen Umwelt, Soziales und Governance («Environmental, Social, Governance» – ESG) in den Executive Bonus Plan der Gruppe ab dem Geschäftsjahr 2022 wird das Thema Nachhaltigkeit für Autoneum in Zukunft noch mehr an Bedeutung gewinnen.

Source:

Autoneum Management AG

08.02.2023

SBTi approves science-based targets of Autoneum

The Science Based Targets initiative (SBTi) has approved Autoneum’s science-based emissions reduction targets. The validation by the SBTi is an important milestone in Autoneum’s efforts to reduce its direct and indirect greenhouse gas (GHG) emissions along the entire value chain.

Recognizing the serious environmental challenges facing the world today and the resulting need for rapid and significant reductions in global CO2 emissions, Autoneum has committed to reducing its absolute scope 1 and 2 GHG emissions by 20% by 2027 from a 2019 base year. The Company also commits to reduce its absolute scope 3 GHG emissions from purchased goods and services by 20% within the same timeframe. Autoneum’s GHG emission reduction targets were validated by the SBTi on January 12, 2023, and are in line with the goals of the Paris Agreement to limit global warming to well below 2°C. The Company is thus taking another important step toward a sustainable future of mobility.

An overview of all emissions reduction targets and activities implemented by Autoneum in 2022 will be published in the Company’s Corporate Responsibility Report 2022 on March 24, 2023.

The Science Based Targets initiative (SBTi) has approved Autoneum’s science-based emissions reduction targets. The validation by the SBTi is an important milestone in Autoneum’s efforts to reduce its direct and indirect greenhouse gas (GHG) emissions along the entire value chain.

Recognizing the serious environmental challenges facing the world today and the resulting need for rapid and significant reductions in global CO2 emissions, Autoneum has committed to reducing its absolute scope 1 and 2 GHG emissions by 20% by 2027 from a 2019 base year. The Company also commits to reduce its absolute scope 3 GHG emissions from purchased goods and services by 20% within the same timeframe. Autoneum’s GHG emission reduction targets were validated by the SBTi on January 12, 2023, and are in line with the goals of the Paris Agreement to limit global warming to well below 2°C. The Company is thus taking another important step toward a sustainable future of mobility.

An overview of all emissions reduction targets and activities implemented by Autoneum in 2022 will be published in the Company’s Corporate Responsibility Report 2022 on March 24, 2023.

28.11.2022

Autoneum introduces fully recyclable polyester carpet systems

Automotive carpets are typically multi-layered systems that can be challenging to recycle. By introducing a carpet made of 100% polyester, Autoneum now opens up new opportunities for vehicle manufacturers to meet their sustainability targets. The innovative carpet systems are fully recyclable, thus paving the way for an improved and more sustainable end-of-life recycling of electric vehicles. In addition, the high content of recycled PET as well as the zero waste and less energy-intensive production process further improve the carbon footprint of Autoneum’s new monomaterial needlepunch and tufted carpets.

Automotive carpets are typically multi-layered systems that can be challenging to recycle. By introducing a carpet made of 100% polyester, Autoneum now opens up new opportunities for vehicle manufacturers to meet their sustainability targets. The innovative carpet systems are fully recyclable, thus paving the way for an improved and more sustainable end-of-life recycling of electric vehicles. In addition, the high content of recycled PET as well as the zero waste and less energy-intensive production process further improve the carbon footprint of Autoneum’s new monomaterial needlepunch and tufted carpets.

Autoneum’s fully recyclable carpet systems ensure a closed material loop and are thus proof of the Company’s commitment to improving the sustainability performance of its products and manufacturing processes. The 100% polyester carpets build on the existing lightweight and particularly sustainable Autoneum Pure technologies: the carpet surface, for example, is made of Di-Light or Relive-1, while Hybrid-Acoustics PET is used for the decoupler. Thanks to Autoneum’s innovative alternative backcoating (ABC) process, which uses a thermoplastic adhesive instead of latex, the production of the new monomaterial needlepunch and tufted carpets also requires significantly less energy and no water at all.

Autoneum’s sustainable tufted carpet system made of 100% polyester is already in development for an electric model of a German vehicle manufacturer that will be available in Europe and Asia.

Source:

Autoneum

22.06.2022

Autoneum publishes Corporate Responsibility Report 2021

  • Joining Science Based Targets initiative

ith its Advance Sustainability Strategy 2025 launched in 2018, Autoneum defined ambitious goals in the areas of environment, society and governance. In the past year, significant quantitative and qualitative improvements were achieved, as shown in the Corporate Responsibility Report 2021 published today. For example, CO2 emissions were reduced in 2021 and the proportion of reused production scrap (recycling) was significantly increased.

  • Joining Science Based Targets initiative

ith its Advance Sustainability Strategy 2025 launched in 2018, Autoneum defined ambitious goals in the areas of environment, society and governance. In the past year, significant quantitative and qualitative improvements were achieved, as shown in the Corporate Responsibility Report 2021 published today. For example, CO2 emissions were reduced in 2021 and the proportion of reused production scrap (recycling) was significantly increased.

Following Autoneum’s decision last year to extend its environmental targets with quantifiable targets for all direct and indirect greenhouse gas emissions and a time horizon to 2027, the Company has recently signed the declaration to join the Science Based Targets initiative (SBTi). Autoneum acknowledges the urgent need for action and will submit its ambitious, science-based targets to the SBTi to reduce CO2 emissions in the near term. In addition, Autoneum is reporting its Scope 3 emissions in full for the first time. In line with the strategic goal of continuously reducing electricity purchases from fossil fuels and replacing them with renewable energies, ten plants worldwide were converted to renewable energies in 2021.

In the past year, Autoneum again implemented a large number of projects in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management”: 29 eco-efficiency projects with a focus on materials efficiency and recycling contributed to more environmentally friendly production and correspondingly more sustainable components worldwide. The result was a significant reduction in waste and a further optimization of processes for a range of products. Moreover, new eco-efficient products were successfully launched on the market.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2021.

Source:

Autoneum Management AG

15.11.2021

Autoneum: Flexi-Loft with high acoustic performance

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

04.11.2021

Autoneum presents medium-term financial targets

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Based on the further expansion of the portfolio with sustainable products and new applications for e-vehicles as well as the increase in market share with existing and new customers, particularly in Asia, the Company expects a profitable revenue growth at market level in the medium term. Based on the expected revenue development, further progress in the turnaround of North America as well as the consistently practiced operational excellence in all business areas, Autoneum targets an EBITDA margin of 13% in the medium term. Accordingly, a solid free cash flow in the amount of 6% of revenue and a further increase in the equity ratio to over 35% are targeted. The Company still intends to pay a dividend to shareholders of at least 30% of the profit attributable to Autoneum shareholders.

More information:
Autoneum Automotive Sustainability
Source:

Autoneum Management AG

(c) Autoneum
14.07.2021

Autoneum: Carpets even more eco-friendly

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Lightweight, textile-based carpet technologies such as Di-Light or Relive-1 significantly improve the environmental performance of carpets. For example, Di-Light-based carpets consist of up to 97% recycled PET; aside from that, they are around 20% lighter than conventional needlepunch carpets, thus contributing to lower fuel consumption and CO2 emissions from vehicles. In addition, Autoneum needlepunch carpets are now even more sustainable thanks to the innovative ABC process, which uses a thermoplastic adhesive instead of latex in the backcoating: Unlike latex, thermoplastic adhesives can be heated and melted down together with the carpet components made of pure PET at the end of the product life cycle, which facilitates recycling considerably. Furthermore, since the fibers of the thermoplastic mono-material are easier to open, carpet cut-outs can be reclaimed more easily, thereby reducing the consumption of natural resources as well as waste volumes and thus CO2 emissions. The environmental  performance of Autoneum’s needlepunch carpets, which already contain a high proportion of recycled PET, is thus further improved.

Moreover, backcoatings without latex improve the sustainability of carpets not only thanks to better recyclability at the end of the product life cycle. Since the application of the thermoplastic adhesive using the innovative ABC process consumes significantly less energy than the production of latexbased backcoatings and does not require any water at all, the environmental impact can already be minimized in the manufacturing process. Additionally, thermoplastic adhesives developed in-house by Autoneum will open up new possibilities in the future for adapting backcoatings to the individual needs of vehicle manufacturers in terms of their acoustic performance, stiffness and abrasion resistance.

Models from various customers in Europe and North America are already equipped with latex-free needlepunch carpets from Autoneum. In the near future, backcoatings with thermoplastic adhesives will also be used for Autoneum’s tufted carpets. Production of the new, even more sustainable generation of tufted carpets is scheduled to start in early 2022.

Autoneum: Tuftingteppich (c) Autoneum
19.11.2020

Autoneum: Tuftingteppich aus rezykliertem PET

Mit Relive-1 lanciert Autoneum einen innovativen Tuftingteppich, der höchsten Ansprüchen an nachhaltige Mobilität gerecht wird. Die mit dem «Autoneum Pure.»-Label für besondere Umweltfreundlichkeit ausgezeichnete Tuftingtechnologie für die Kompaktbis Premiumklasse ist gegenüber dem in diesen Fahrzeugsegmenten üblichen Teppichstandard zudem langlebiger und überzeugt mit einer exzellenten Reinigungsfähigkeit.

Mit Relive-1 lanciert Autoneum einen innovativen Tuftingteppich, der höchsten Ansprüchen an nachhaltige Mobilität gerecht wird. Die mit dem «Autoneum Pure.»-Label für besondere Umweltfreundlichkeit ausgezeichnete Tuftingtechnologie für die Kompaktbis Premiumklasse ist gegenüber dem in diesen Fahrzeugsegmenten üblichen Teppichstandard zudem langlebiger und überzeugt mit einer exzellenten Reinigungsfähigkeit.

Die globale Nachfrage nach innovativen Fahrzeugen der Zukunft und nachhaltigen Mobilitätsformen steigt. Automobilhersteller und Zulieferer fokussieren sich in der Fahrzeugentwicklung entsprechend verstärkt auf ressourcenschonende Leichtbaukomponenten und Produktionsprozesse. Darüber hinaus sind Optik und Haptik der Passagierkabine ausschlaggebend für die Kaufentscheidung, da das Auto in Zukunft verstärkt für Arbeit und Erholung genutzt wird. Hier beeinflussen Teppichsysteme durch ihre Grösse die Qualitätswahrnehmung entscheidend. Mit Relive-1 bietet Autoneum neu eine Premiumtechnologie für Fahrzeugteppiche an, die nicht nur mit ihrem ästhetischen Erscheinungsbild punktet, sondern auch eine überdurchschnittliche Umweltbilanz aufweist. Unter anderem überzeugen Teppiche aus Relive-1 durch einen besonders nachhaltigen Einsatz von Rohmaterialien: So werden für die Herstellung der Teppichfasern nur rezyklierte PET-Flaschen verwendet. Autoneum verwertet diesen Rohstoff wieder, schont so natürliche Ressourcen und verringert Plastikmüll – und sorgt gleichzeitig dafür, dass aus ausgedienten PET-Flaschen neue, hochwertige Teppichsysteme für kommende Fahrzeuggenerationen kosteneffizient produziert werden können. Darüber hinaus stellt Relive-1 einen bedeutenden Schritt zu Monomaterial-Konstruktionen und somit zu einer abfallfreien Fertigung von Tuftingteppichen dar.

Gleichzeitig steht Relive-1 einmal mehr für die überdurchschnittliche Produktqualität von Autoneum: Im Vergleich zu Standardteppichen der Kompakt- bis Oberklasse sind Relive-1-Teppiche dank signifikant höherer Abriebfestigkeit robuster und durch die vertikale Ausrichtung der Fasern sowie wasserabweisende Wirkung des Polyesters leicht zu reinigen. So können kleine Partikel wie Holzsplitter, Staub oder Steine, aber auch Flüssigkeiten problemlos und ohne Rückstände entfernt werden, was ein entscheidender Vorteil bei häufig in der Freizeit genutzten Fahrzeugen wie SUVs ist. Die Verbindung von herausragender Leistung und Nachhaltigkeit definiert heute bei Fahrzeugen der Premiumklasse den neuen Luxusstandard.

Source:

Autoneum Management AG

10.06.2020

“Autoneum Pure.”: new sustainability label for products

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Technologies with an excellent environmental performance throughout the entire product life cycle – that is what “Autoneum Pure.” stands for. In future, components that meet the highest standards in terms of sustainability and eco-friendliness can be identified at a glance under this label. This also includes the innovation “Mono-Liner” for wheelhouse outer liners.

As innovation leader in acoustic and thermal management, Autoneum continuously invests in the development and production of resource-saving components that make cars lighter and thus more climate-friendly. In view of an increasing sustainability awareness and the correspondingly greater information needs on environmentally-friendly vehicle components, the Company has now launched Autoneum Pure. The label determines particularly sustainable technologies, thereby guiding car manufacturers in product selection for future models.

Autoneum Pure is based on a comprehensive set of criteria assessing the sustainability performance of a product in all four phases of its life cycle: material procurement, production, use and end of life. For example, components with a high content of recyclable materials or those that achieve significant weight savings compared to comparable standard components qualify for the “Autoneum Pure.” label. Autoneum already offers various multifunctional technologies that meet the high standards for Autoneum Pure products: Ultra-Silent for underbody systems or battery undercovers, Di-Light for carpet systems, Prime-Light and IFP-R2 for inner dashes and floor insulators as well as Hybrid-Acoustics PET for e-motor encapsulations and engine-mounted parts, which was launched in fall 2019.

With Mono-Liner, the latest innovation for wheelhouse outer liners is also included in the Autoneum Pure portfolio. Among other things, the Mono-Liner-based components convince thanks to their lightweight construction, thereby contributing to lower vehicle weight with correspondingly less fuel consumption and emissions. The excellent life cycle assessment is also based on their particularly resource-saving manufacturing: Production cut offs of the components, which consist to a large extent of recycled PET fibers, can be processed into pellets and completely returned to the manufacturing process as fibers. An SUV and a crossover model from a US vehicle manufacturer already benefit from Mono-Liner wheelhouse outer liners.

Anahid Rickmann, Head of Corporate Communications & Responsibility, explains: “With Autoneum Pure we are the first automotive supplier to establish a sustainability label in the field of acoustic and thermal management. Autoneum Pure is part of the Company's Advance Sustainability  Strategy 2025 and sets industry standards in product communication.”

Source:

Autoneum Holding AG

04.06.2019

Autoneum publishes Corporate Responsibility Report 2018

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

Assuming social responsibility and acting sustainably has been Autoneum's focus since it became an independent company. In order to achieve the best results possible, the Company last year has defined a number of quantitative and qualitative targets in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management” for 2025. In all these areas Autoneum has achieved important successes already in 2018.

Through the consistent implementation of environmental efficiency projects – a total of over 80 worldwide – Autoneum reduced its environmental impact further in 2018. For example, both the amount of waste (–5.9%) and water consumption (–13.4%) have fallen sharply. At the same time, various plants – particularly in Asia and North America – have expanded their recycling capacity, significantly increasing the amount of production waste reused in the manufacturing process (14.9%).

To further improve working conditions especially in production, measures were taken in all Business Groups in 2018 to enhance occupational health and safety and well-being in the workplace. A global employee satisfaction survey conducted in fall last year has confirmed the first positive effects of these measures.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2018 and is available at www.autoneum.com/corporateresponsibility/.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum Management AG

04.06.2019

Autoneum veröffentlicht Corporate Responsibility-Bericht 2018

Gesellschaftliche Verantwortung und nachhaltiges Handeln stehen seit der Verselbständigung von Autoneum im Fokus des Unternehmens. Um bestmögliche Resultate zu erzielen, hat Autoneum vergangenes Jahr einer Vielzahl an quantitativen und qualitativen Zielen in den Bereichen „nachhaltige Produkte und Produktionsprozesse“, „fairer und attraktiver Arbeitsplatz“, „Good Corporate Citizenship“ und „verantwortungsvolle Beschaffung“ für 2025 verabschiedet. 2018 wurden wichtige Erfolge in allen Teilbereichen erzielt.

Durch die konsequente Umsetzung von Ökoeffizienzprojekten – weltweit insgesamt über 80 – hat das Unternehmen 2018 seine Umweltauswirkungen weiter reduziert. So sind nicht nur die Abfallmengen (–5.9%), sondern auch der Wasserverbrauch (–13.4%) stark gesunken. Gleichzeitig haben verschiedene Werke – vor allem in Asien und Nordamerika – ihre Recyclingkapazitäten erweitert, wodurch das Volumen des in der Fertigung wiederverwerteten Produktionsausschusses signifikant anstieg (14.9%).

Gesellschaftliche Verantwortung und nachhaltiges Handeln stehen seit der Verselbständigung von Autoneum im Fokus des Unternehmens. Um bestmögliche Resultate zu erzielen, hat Autoneum vergangenes Jahr einer Vielzahl an quantitativen und qualitativen Zielen in den Bereichen „nachhaltige Produkte und Produktionsprozesse“, „fairer und attraktiver Arbeitsplatz“, „Good Corporate Citizenship“ und „verantwortungsvolle Beschaffung“ für 2025 verabschiedet. 2018 wurden wichtige Erfolge in allen Teilbereichen erzielt.

Durch die konsequente Umsetzung von Ökoeffizienzprojekten – weltweit insgesamt über 80 – hat das Unternehmen 2018 seine Umweltauswirkungen weiter reduziert. So sind nicht nur die Abfallmengen (–5.9%), sondern auch der Wasserverbrauch (–13.4%) stark gesunken. Gleichzeitig haben verschiedene Werke – vor allem in Asien und Nordamerika – ihre Recyclingkapazitäten erweitert, wodurch das Volumen des in der Fertigung wiederverwerteten Produktionsausschusses signifikant anstieg (14.9%).

Um die Arbeitsbedingungen insbesondere in der Produktion weiter zu verbessern, sind 2018 in allen Business Groups Massnahmen zur Arbeitssicherheit und zum Wohlbefinden am Arbeitsplatz ergriffen worden. Eine im Herbst an allen Standorten durchgeführte Umfrage zur Mitarbeiterzufriedenheit hat erste positive Resultate bestätigt.

Eine vollständige Übersicht über alle Ziele und Aktivitäten des vergangenen Jahres ist im Corporate Responsibility-Report 2018 aufgeführt und unter www.autoneum.com/de/corporate-responsibility/ verfügbar.

 

More information:
Autoneum Autoneum Management AG
Source:

Autoneum Management AG