From the Sector

Reset
11 results
Lenzing: Sustainable geotextiles as glacier protection and jacket (c) UN Nations
22.03.2024

Lenzing: Sustainable geotextiles as glacier protection and jacket

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.

Marchi_Fildi_Filidea headquarter Photo Marchi & Fildi Group
Marchi Fildi Filidea headquarter
24.11.2023

The Marchi & Fildi Group: First Sustainability Report published

The data and the information reported examine the performance relative to the companies Marchi & Fildi S.p.A. and Filidea S.r.l. during the year 1st January 2022 to 31st December 2022. In addition, with the aim of putting the data into a context of developments, a comparison with data pertaining to 2021 was also made.

Amongst the numerous data and insights provided by the analyses given in the Report, some relevant performance factors relating to environmental achievements emerge.

With reference to Marchi & Fildi, and in comparison to 2021, the year 2022 demonstrated:

  • A unit reduction in water consumption of 57% and unit reduction of waste water of 19%
  • A unit reduction in electric power consumption of 13%

An overall reduction in CO2 emissions (Scope I + Scope II) of 22% In the same period, for Filidea the following results are shown:

The data and the information reported examine the performance relative to the companies Marchi & Fildi S.p.A. and Filidea S.r.l. during the year 1st January 2022 to 31st December 2022. In addition, with the aim of putting the data into a context of developments, a comparison with data pertaining to 2021 was also made.

Amongst the numerous data and insights provided by the analyses given in the Report, some relevant performance factors relating to environmental achievements emerge.

With reference to Marchi & Fildi, and in comparison to 2021, the year 2022 demonstrated:

  • A unit reduction in water consumption of 57% and unit reduction of waste water of 19%
  • A unit reduction in electric power consumption of 13%

An overall reduction in CO2 emissions (Scope I + Scope II) of 22% In the same period, for Filidea the following results are shown:

  • A unit reduction in water consumption of 26%, unit waste water of 22%
  • A reduction in unit natural gas consumption of 7%
  • A reduction in unit electric power consumption of 14%
  • An overall reduction in CO2 emissions (Scope I + Scope II) of 7%

These data offer quantitative feedback on the constant commitment to the optimisation of resources and use of production technologies with low energy impact, which the Group has adopted for years.

Massimo Marchi, Marchi & Fildi’s President, has this to say about the choice to invest in this form of reporting:
“The decision to write a Sustainability Report represents for us one of the elements which guide us towards the constant improvement of company performance with reference to ESG. This is one of the stages towards the formalisation of a strategic plan for the management of sustainability, a journey which the Group has been committed to for years and in which we believe 100%.”

 

Source:

Marchi & Fildi Group

Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

(c) TEXAID
21.12.2022

TEXAID introduces recycled tote bag with a digital product passport

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

This NFC chip is a circularity.IDⓇ digital product passport, developed by the Berlin-based company, circular.fashion. By scanning the NFC chip on the bag with a cell phone, customers are redirected to the circularity.IDⓇ product platform. On this platform, they can find further information on the supply chain as well as instructions on how to refurbish or return the bag for proper recycling. Through this digital product passport, a total transparency over the entire bag production is enabled and for customers it is an easy and quick way to get the information they need.

The chip also allows the manual sorters to getthe product information much faster to make a better sorting decision, e.g. the fiber composition. For this purpose, circular.fashion's intelligent sorting stations are used to scan the chip. Several of these stations have been installed at TEXAID's sorting facility in Apolda, Germany, to facilitate optimized reuse and recycling decisions and ensure another life for the product or fiber.

Source:

TEXAID

Photo: Texaid
07.06.2022

TEXAID enables Textile-to-Textile Recycling

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

As a leading company in the collecting, sorting, reselling and recycling of post-consumer textile waste, TEXAID has enabled the recycling of post-consumer textile waste into new textiles and clothing. After two years of development, the company has developed a fabric including 50 % of post-consumer textile waste from used clothing, collected and prepared for recycling by TEXAID.

Today’s linear system of «take – make – waste» needs to change. New textiles are produced, used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID invested in the textile-to-textile recycling and product development.

Collaboration enables recycling
After two years of research, product development, and most important, building partnerships in the value chain, TEXAID has been able to develop a fabric made of 100 % recycled fiber in close collaboration with our value chain partners.

The fabric is a blend of 50 % post-consumer textile waste that TEXAID has collected in Germany and Switzerland. White cotton textiles which cannot be worn, have been sorted out in a sorting facility in Apolda, Germany. The other 50% is made from ocean-bound plastic waste which is plastic with a high risk of entering the ocean which has been saved and recycled by Unifi. The fabric and bag have been produced in Italy. The cotton material has been shredded by Marchi & Fildi in Biella, IT, who then spun the recycled cotton and recycled polyester fibers into a yarn. This yarn has been woven into a fabric by Tessitura Casoni.T.F.C.

Through this proof of concept, it has been showcased that making fabrics of 100 % recycled content and with 50 % of post-consumer textiles is possible. TEXAID is looking for strong industry partners to push high-value textile to textile recycling technologies in joint projects like these.

More information:
Texaid Recycling
Source:

Texaid

Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester (c) Marchi & Fildi Group
Linea Gleaming
24.11.2021

Italian spinning group launches new metalloplastic yarns

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

“Thanks to our commitment in the research of materials, we are able to propose metalloplastic yarns produced with 100% recycled material; the film used for the production of flat yarns, too, is in recycled polyester, with a quality level that is suitable for cutting – the Company explains -. Till now it was possible to find in the market only metalloplastic yarns with not recycled polyester flat yarn, twisted with certified fibers. This represents an important step forward to implement a circular economy possibility for this kind of products too”.

The Gleaming yarns GRS certified can be supplied in gold and silver, colors and transparent, in various counts, widths and types; they are suitable for use in flat and circular knitting, weaving, hosiery and as a component in fancy yarns.

The Gleaming line, with a wide selection of yarns in stock service, represents a completion of the offer of the Marchi & Fildi Group. The Gleaming yarns are offered in different thicknesses, widths and types with both metallized and transparent, iridescent, refracting and phosphorescent effects. The collection also includes items with special features of resistance to chemical and dyeing treatments. The Gleaming metalloplastic yarns find application in the world of fashion and furniture, for creative and fancy yarns and fabrics, accessories and decorations. Products with refractive features are also used in technical items like uniforms and workwear, sport garments and accessories, external ribbons and labels.

Source:

Marchi & Fildi Group

(c) Marchi & Fildi Group
19.10.2021

Marchi & Fildi Group: Positive balance for 10 years of the photovoltaic installation

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

The Marchi & Fildi Group has always been committed to rationalising electric energy consumption with the aim of contributing towards an eco-sustainable development without compromising the rate of production and the ability to grow. In addition to producing its own electric energy, over the years, the company has also achieved an increasing number of Energy Efficiency Titles (TEE), otherwise known as white certificates. In 2021, 138 TEEs have been awarded as a result of such interventions as the introduction of LED lighting and the optimisation of the production processes which, while still as efficient as before, permit the company to reduce the electric energy consumption of the machinery.

*In the meter class for the range of 3kW to 4.5 kW, the average consumption for residential properties is the equivalent of 3,382 kWh (source: Arera Relazione annual state of services for the year 2020). The calculations are the results of an internal study conducted by the Marchi & Fildi Group.

Source:

Marchi & Fildi Group

02.04.2021

Fashion 4 Development & C.L.A.S.S. launch: The Recloth Resource Guide

Fashion 4 Development & C.L.A.S.S. Eco Hub will launch The Reclothe Resource Guide during the virtual exhibit: Discover the SDGs - To Make Peace With Nature, a virtual hub convened by the United Nations Office for Partnerships April 1 - 30, 2021.

The publication's mission is to inform and educate fashion industry professionals, schools, universities, students, and new generation brands to focus on the next generation of the circular economy and make an impact on the value chain. The ReClothe guide lists all solutions, technologies, fabric suppliers, dyers, and finishers currently available and scalable globally that can really answer the new generation needs of the contemporary consumer. ReClothe will be published quarterly and focus on innovators working the best practices and opportunities in development & manufacturing for a responsible fashion industry.

Fashion 4 Development & C.L.A.S.S. Eco Hub will launch The Reclothe Resource Guide during the virtual exhibit: Discover the SDGs - To Make Peace With Nature, a virtual hub convened by the United Nations Office for Partnerships April 1 - 30, 2021.

The publication's mission is to inform and educate fashion industry professionals, schools, universities, students, and new generation brands to focus on the next generation of the circular economy and make an impact on the value chain. The ReClothe guide lists all solutions, technologies, fabric suppliers, dyers, and finishers currently available and scalable globally that can really answer the new generation needs of the contemporary consumer. ReClothe will be published quarterly and focus on innovators working the best practices and opportunities in development & manufacturing for a responsible fashion industry.

The guide includes Bacx™ by Centro Seta, Bext360, DYNTEX® Biosynthetics, Eastman Naia™, ECOSENSOR™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Iluna Group, Lanificio Zignone, Maeba International, Mending for Good, Modern Meadow, Re.VerSo™, ROICA™ by Asahi Kasei, Santoni, Smartex, Spiber Inc., SUPREME GREEN COTTON® by Varvaressos, TINTEX Textiles, VEGEA and YKK.

For registration click here.

(c) GB Network Marketing & Communication
07.12.2018

BERTO in collaboration with BLACKHORSE LANE, EVEREST and MARCHI & FILDI presents “PIANETA”, its NEW CIRCULAR DENIM

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

  • BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
  • EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
  • MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

 

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

  • BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
  • EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
  • MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

 

Source:

GB Network Marketing & Communication

Award-winning TINTEX Textiles shows water saving solutions at Performance Days (c) TINTEX Textiles
80% Lenzing Modal® + 20% European Hemp rib by TINTEX Textiles
20.11.2018

Award-winning TINTEX Textiles shows water saving solutions at Performance Days

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

  • A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
  • SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
  • REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
  • Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
  • ROICA™ by Asahi Kasei
    - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
    - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

More information:
TINTEX ROICA™ Performance Days
Source:

GB Network

TINTEX Presents “NATURALLY ADVANCED” Innovations © TINTEX
TINTEX Presents “NATURALLY ADVANCED” Innovations
19.12.2017

TINTEX Presents “NATURALLY ADVANCED” Innovations

TINTEX is pleased to present its latest fabric innovations at the above salons with a new range of more than 80 qualities and styles designed for the Sportswear, Athleisure, Fashion and Underwear market sectors. The collection focusses on three jersey fabric concepts: TIMELESS, FASHIONABLE & INNOVATIVE.

TINTEX is a modern industrial company based in the Porto region since 1998, producing market savvy fabrics for global designers and brands. TINTEX makes a truly sustainable range of precision, modern hybrid jersey fabrics that offer a better, Naturally Advanced choices to all its customers.

TINTEX is pleased to present its latest fabric innovations at the above salons with a new range of more than 80 qualities and styles designed for the Sportswear, Athleisure, Fashion and Underwear market sectors. The collection focusses on three jersey fabric concepts: TIMELESS, FASHIONABLE & INNOVATIVE.

TINTEX is a modern industrial company based in the Porto region since 1998, producing market savvy fabrics for global designers and brands. TINTEX makes a truly sustainable range of precision, modern hybrid jersey fabrics that offer a better, Naturally Advanced choices to all its customers.

The new ‘Naturally Advanced’ position means “advancing beautiful, organic and natural materials to the next level combined with unique, hybrid ‘nature-tech’ smarts, with advanced, added value and creativity, thanks to dedicated investments that serve and secure our customer demands both now and in the seasons to come” says CEO Mario Jorge. New innovations, which include the ISPO Best Product Award i (SOFT EQUIPMENT category) in TexTrends for fall winter 19/20, maintain and upgrade the honest but hi-tech sustainable organics that is at the heart of the TINTEX DNA to create better, smarter eco-materials, always with new levels of performance and hi-tech smarts, thanks to its expertise in specialist dyeing and finishing techniques, coatings and applications. These are all researched, designed and made using the latest equipment and processes. This season the new TINTEX collection plays with new colour balance techniques that deploy the benefits of chromotherapy for welbeing alongside skin safe materials and finishings.

The collection uses up to 90% of new smart and sustainable materials and include: Tencel, Modal & Micromodal, Organic Cottons, Supima cottons, Seacell fibres, Natural organic linens and the new, full colour ECOTEC® yarns by Marchi & Fildi, a smarter cotton made from pre-consumer clippings that in manufacture save up to 79% water. This season TINTEX is also introducing the new ECOTEC® yarn Phoenix (50% ECOTEC®, 50% recycled polyester, NM1/50 GRS-certified) for open, light and dry textures. Wellbeing credentials are guaranteed with Tessile e Salute certifications, TINTEX also presents new developments using the ROICA™ Eco Smart family of ecosustainable stretch yarns with certificated credentials. This family of yarns claim the world-first GRS certified ROICA™ premium stretch yarn that comes at least 50% from recycled pre-consumer waste.

The newest introduction for second skin qualities and for products to the athleisure market within TINTEX collection is ROICA™ Feel Good family that promises a new level of performance with ‘feelgood comfort’ and freshness.

For colouration effects, we can use the ROICA™ Colour Perfect family of yarns to create a flawless and responsible finish to dyed performance stretch assortments. Colours to Tranquilize, to Activate the Senses, to Recharge, to Energize.

Key highlights include: changeant effects (yarn and dyeing solutions), thermosensitive (reds/ blues) coatings, UV sensitive coatings and colourful coated patterns, extra fine and semi-transparent jerseys, but also, compact and fluid qualities.