From the Sector

Reset
1424 results
Winner of Cellulose Fibre Innovation Award 2024 (c) nova-Institute
Winner of Cellulose Fibre Innovation Award 2024
27.03.2024

Winner of Cellulose Fibre Innovation Award 2024

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

40 international speakers presented the latest market trends in their industry and illustrated the innovation potential of cellulose fibres. Leading experts introduced new technologies for the recycling of cellulose-rich raw materials and gave insights into circular economy practices in the fields of textiles, hygiene, construction and packaging. All presentations were followed by exciting panel discussions with active audience participation including numerous questions and comments from the audience in Cologne and online. Once again, the Cellulose Fibres Conference proved to be an excellent networking opportunity to the 214 participants and 23 exhibitors from 27 countries. The annual conference is a unique meeting point for the global cellulose fibre industry.  

For the fourth time, nova-Institute has awarded the “Cellulose Fibre Innovation of the Year” Award at the Cellulose Fibres Conference. The Innovation Award recognises applications and innovations that will lead the way in the industry’s transition to sustainable fibres. Close race between the nominees – “The Straw Flexi-Dress” by DITF & VRETENA (Germany), cellulose textile fibre from unbleached straw pulp, is the winning cellulose fibre innovation 2024, followed by HONEXT (Spain) with the “HONEXT® Board FR-B (B-s1, d0)” from fibre waste from the paper industry, while TreeToTextile (Sweden) with their “New Generation of Bio-based and Resource-efficient Fibre” won third place.

Prior to the event, the conference advisory board had nominated six remarkable innovations for the award. The nominees were neck and neck, when the winners were elected in a live vote by the audience on the first day of the conference.

First place
DITF & VRETENA (Germany): The Straw Flexi-Dress – Design Meets Sustainability

The Flexi-Dress design was inspired by the natural golden colour and silky touch of HighPerCell® (HPC) filaments based on unbleached straw pulp. These cellulose filaments are produced using environmentally friendly spinning technology in a closed-loop production process. The design decisions focused on the emotional connection and attachment to the HPC material to create a local and circular fashion product. The Flexi-Dress is designed as a versatile knitted garment – from work to street – that can be worn as a dress, but can also be split into two pieces – used separately as a top and a straight skirt. The top can also be worn with the V-neck front or back. The HPC textile knit structure was considered important for comfort and emotional properties.

Second place
Honext Material (Spain): HONEXT® Board FR-B (B-s1, d0) – Flame-retardant Board made From Upcycled Fibre Waste From the Paper Industry

HONEXT® FR-B board (B-s1, d0) is a flame-retardant board made from 100 % upcycled industrial waste fibres from the paper industry. Thanks to innovations in biotechnology, paper sludge is upcycled – the previously “worthless” residue from paper making – to create a fully recyclable material, all without the use of resins. This lightweight and easy-to-handle board boasts high mechanical performance and stability, along with low thermal conductivity, making it perfect for various applications in all interior environments where fire safety is a priority. The material is non-toxic, with no added VOCs, ensuring safety for both people and the planet. A sustainable and healthy material for the built environment, it achieves Cradle-to-Cradle Certified GOLD, and Material Health CertificateTM Gold Level version 4.0 with a carbon-negative footprint. Additionally, the product is verified in the Product Environmental Footprint.

Third Place
TreeToTextile (Sweden): A New Generation of Bio-based and Resource-efficient Fibre

TreeToTextile has developed a unique, sustainable and resource efficient fibre that doesn’t exist on the market today. It has a natural dry feel similar to cotton and a semi-dull sheen and high drape like viscose. It is based on cellulose and has the potential to complement or replace cotton, viscose and polyester as a single fibre or in blends, depending on the application.
TreeToTextile Technology™ has a low demand for chemicals, energy and water. According to a third party verified LCA, the TreeToTextile fibre has a climate impact of 0.6 kg CO2 eq/kilo fibre. The fibre is made from bio-based and traceable resources and is biodegradable.

The next conference will be held on 12-13 March 2025.

Source:

nova-Institut für politische und ökologische Innovation GmbH

Green Theme Technologies
27.03.2024

Green Theme Technologies partners with Hwasung International

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Source:

Green Theme Technologies

Seite 4 von 5 Schematische Darstellung der von Kelheim und Gebr. Otto entwickelten Periodenunterwäsche. Grafik Kelheim Fibres
Seite 4 von 5 Schematische Darstellung der von Kelheim und Gebr. Otto entwickelten Periodenunterwäsche.
27.03.2024

Techtextil: Kelheim Fibres und Gebr. Otto präsentieren nachhaltige Periodenunterwäsche

Zur Techtextil, die Ende April 2024 in Frankfurt stattfindet, werden die Unternehmen Kelheim Fibres und Gebr. Otto ihr gemeinsames Konzept präsentieren, das Periodenunterwäsche nachhaltiger und leistungsfähiger macht. Auf dem BW-i-Gemeinschaftsstand bzw. auf dem Gemeinschaftsstand des IVGT zeigen die Innovationspartner ihre Lösung einer Periodenunterwäsche aus biobasierten Materialien, die sich durch Performancewerte hervorsticht. Die verschiedenen Viskosespezialfasern, die dabei zum Einsatz kommen, stammen von Kelheim. In der jeweils passenden Zusammensetzung verspinnt sie Gebr. Otto.

Zur Techtextil, die Ende April 2024 in Frankfurt stattfindet, werden die Unternehmen Kelheim Fibres und Gebr. Otto ihr gemeinsames Konzept präsentieren, das Periodenunterwäsche nachhaltiger und leistungsfähiger macht. Auf dem BW-i-Gemeinschaftsstand bzw. auf dem Gemeinschaftsstand des IVGT zeigen die Innovationspartner ihre Lösung einer Periodenunterwäsche aus biobasierten Materialien, die sich durch Performancewerte hervorsticht. Die verschiedenen Viskosespezialfasern, die dabei zum Einsatz kommen, stammen von Kelheim. In der jeweils passenden Zusammensetzung verspinnt sie Gebr. Otto.

Rund 15.000 Produkte zur Monatshygiene verbraucht eine Frau durchschnittlich in ihrem Leben. Dabei handelt es sich hauptsächlich um Einwegprodukte, durch die viele Tonnen Müll entstehen, und deren Plastikkomponenten bis zu 500 Jahre brauchen, bis sie – nachdem sie in immer kleinere und kleinste Teile zerfallen sind - abgebaut sind. Produkte zur weiblichen Monatshygiene, Einweg- wie Mehrwegprodukte, nachhaltiger zu gestalten, ist seit einigen Jahren Trend. In diese Kategorie gehören nicht nur biologisch abbaubare Einwegprodukte, sondern auch waschbare Periodenslips, die etablierte Wäschehersteller ebenso wie Start-ups anbieten.

Die Periodenunterwäsche ist aus mehreren Lagen mit unterschiedlichen Funktionen aufgebaut –das Topsheet muss Flüssigkeit schnell aufnehmen und vom Körper wegleiten, die anschließende Verteilerschicht (Acquisition-Distribution-Layer, ADL) sorgt für eine zügige und ideale Verteilung der Flüssigkeit im Saugkörper. Dieser schließt die Flüssigkeit ein und hält sie in seinem Inneren fest und verhindert so ein mögliches Rücknässen. Das Ergebnis ist ein Prototyp, der bei Schnelligkeit und Kapazität der Flüssigkeitsaufnahme sowie Rücknässung deutlich bessere Werte erzielt als handelsübliche Lösungen.

Source:

Kelheim Fibres

26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

Nachhaltigkeit in Textil-KMU Foto: Shutterstock via Hochschule Albstadt-Sigmaringen
26.03.2024

Weiterbildungskonzept für mehr Nachhaltigkeit in Textil-KMUs

Die Hochschule Albstadt-Sigmaringen und der Gesamtverband der deutschen Maschenindustrie arbeiten in einem gemeinsamen Forschungsprojekt an einem Weiterbildungsprogramm zur Förderung der Nachhaltigkeit in Textilunternehmen, das speziell auf die Bedürfnisse kleiner und mittlerer Firmen zugeschnitten ist. Das innovative Konzept soll eine flexible und interaktive Weiterbildung in den Unternehmen ermöglichen. Ziel ist es, Nachhaltigkeit entlang der gesamten Wertschöpfungskette zu fördern und Unternehmen dabei zu unterstützen, ihre ökologische und soziale Verantwortung wahrzunehmen. Gefördert wird das Projekt von der Deutschen Bundesstiftung Umwelt.

Die Hochschule Albstadt-Sigmaringen und der Gesamtverband der deutschen Maschenindustrie arbeiten in einem gemeinsamen Forschungsprojekt an einem Weiterbildungsprogramm zur Förderung der Nachhaltigkeit in Textilunternehmen, das speziell auf die Bedürfnisse kleiner und mittlerer Firmen zugeschnitten ist. Das innovative Konzept soll eine flexible und interaktive Weiterbildung in den Unternehmen ermöglichen. Ziel ist es, Nachhaltigkeit entlang der gesamten Wertschöpfungskette zu fördern und Unternehmen dabei zu unterstützen, ihre ökologische und soziale Verantwortung wahrzunehmen. Gefördert wird das Projekt von der Deutschen Bundesstiftung Umwelt.

Hauptkomponente des Weiterbildungsprogramms ist eine Online-Plattform, auf der Schulungseinheiten zu verschiedenen Aspekten der Kreislaufwirtschaft bereitgestellt werden. Die Inhalte sind für effektives asynchrones Lernen optimiert und werden durch interaktive digitale Ansätze und Medienkonzepte ergänzt. „Zusätzlich zur Online-Plattform können die Trainingsinhalte in Form von Workshops individuell an die Bedürfnisse der Unternehmen angepasst werden“, sagt Projektleiter Marc Weisser. Darüber hinaus bestehe die Möglichkeit, gemeinsam mit der Hochschule neue innovative Ansätze zu entwickeln.

Über einen Zeitraum von 36 Monaten werden die Bedürfnisse der Zielgruppe ermittelt und ein langfristiges Geschäftsmodell entwickelt. Basierend auf den Anforderungen der kleinen und mittleren Unternehmen werden konkrete Inhalte für das Weiterbildungsprogramm erarbeitet und in Module und Lernpfade strukturiert. Geeignete Schulungsformate und -konzepte werden entwickelt, um die Inhalte effektiv und ansprechend zu vermitteln und den Lernerfolg zu fördern. Das entstandene Schulungsformat wird abschließend durch einen Testlauf mit Unternehmen des projektbegleitenden Ausschusses evaluiert, um Stärken und Schwächen zu identifizieren und zu optimieren.

„Das Fort- und Weiterbildungsprogramm soll allen Mitarbeitenden in Textil- und Bekleidungsunternehmen zugänglich sein und deren individuellen Kenntnisstand berücksichtigen“, so Weisser. Die Teilnahme ist sowohl in Präsenz als auch online möglich und kann asynchron erfolgen. „Dadurch sind die Teilnehmenden flexibel, und die Unternehmen können ihre Mitarbeitenden auch im Homeoffice und an Remote-Arbeitsplätzen weiterbilden.“

Source:

Hochschule Albstadt-Sigmaringen

22.03.2024

Forschungsvorhaben "Nachhaltigkeit im Bereich der Textilbranche"

An der Technischen Universität Chemnitz wird ein Forschungsvorhaben zum Thema "Nachhaltigkeit im Bereich der Textilbranche" durchgeführt. Für die dazugehörigen Umfrage werden Textilunternehmen gesucht, die sich daran beteiligen möchten.

Das Management von Nachhaltigkeit und die entsprechende Berichtpflicht betrifft die gesamte Textilwirtschaft. Aus wissenschaftlicher Sicht fehle, so die Verantwortlichen, jedoch über die Textilbranche, insbesondere über die Bekleidungsindustrie hinaus, noch Wissen zum Thema Nachhaltigkeit. Mit Hilfe der Umfrage soll festgehalten werden, in welchem Umfang Textilunternehmer:in die Themen Nachhaltigkeit und Ökobilanzierung bereits berücksichtigen.

Die Umfrage hat eine geschätzte Bearbeitungsdauer von 15 Minuten und ist unter folgendem Link aufrufbar. Datenschutzrechtlich sind die Angaben anonymisiert, ein Rückschluss auf Unternehmen oder Personen ist nicht möglich.

An der Technischen Universität Chemnitz wird ein Forschungsvorhaben zum Thema "Nachhaltigkeit im Bereich der Textilbranche" durchgeführt. Für die dazugehörigen Umfrage werden Textilunternehmen gesucht, die sich daran beteiligen möchten.

Das Management von Nachhaltigkeit und die entsprechende Berichtpflicht betrifft die gesamte Textilwirtschaft. Aus wissenschaftlicher Sicht fehle, so die Verantwortlichen, jedoch über die Textilbranche, insbesondere über die Bekleidungsindustrie hinaus, noch Wissen zum Thema Nachhaltigkeit. Mit Hilfe der Umfrage soll festgehalten werden, in welchem Umfang Textilunternehmer:in die Themen Nachhaltigkeit und Ökobilanzierung bereits berücksichtigen.

Die Umfrage hat eine geschätzte Bearbeitungsdauer von 15 Minuten und ist unter folgendem Link aufrufbar. Datenschutzrechtlich sind die Angaben anonymisiert, ein Rückschluss auf Unternehmen oder Personen ist nicht möglich.

Source:

Professur Fabrikplanung und Intralogistik
Fakultät für Maschinenbau
Technische Universität Chemnitz

22.03.2024

Fashion for Good: Ten new innovators for 2024 programme

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

  • Algreen Ltd: Algreen co-develops alternative materials from algae and biobased sources that can replace fossil-based products such as PU.
  • Balena: Balena creates biodegradable partly biobased polymers for footwear outsoles.
  • Epoch Biodesign: Epoch Biodesign is an enzymatic recycler of PA66 and PA6 textile waste.
  • Fibre52: Fibre52 is a bio-based solution replacing traditional bleach prepared-for-dyeing and dye processes.
  • Gencrest BioProducts Pvt Ltd: Gencrest works with various agri-residues to convert them into textile-grade fibres using their enzymatic technology.
  • HeiQ AeoniQ: HeiQ AeoniQ™ is a continuous cellulose filament yarn with enhanced tensile properties.
  • Nanollose - Nullabor: Nullarbor™Lyocell is developed from microbial cellulose which is converted into pulp pulp to produce a lyocell fibre with their partner Birla Cellulose.  
  • REGENELEY:  REGENELEY pioneers advanced shoe sole recycling technologies by separating and recycling EVA, TPU, and rubber components found in footwear.
  • Samsara Eco: Samsara Eco is an enzymatic recycler of PA66 and PET textile waste.
  • SEFF: SEFF Fibre produces cottonised fibres and blends of hemp fabrics utilising a patented HVPED process.
Source:

Fashion for Good

Lenzing: Sustainable geotextiles as glacier protection and jacket (c) UN Nations
22.03.2024

Lenzing: Sustainable geotextiles as glacier protection and jacket

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.

22.03.2024

GOTS applauds European Parliament’s vote on Green Claims Directive

The Global Organic Textile Standard (GOTS) applauds the European Parliament's vote to ban unverified 'green' product labels by enforcing stricter rules to back green claims and labels. By obligating companies to submit evidence about environmental marketing claims – including advertising and labelling products as ‘biodegradable’, ‘less polluting’, ‘water saving’, or having ‘bio-based content’ – consumers will be able to make better informed decisions about the sustainability of their purchases.

Consumers need protection from greenwashing and false claims about a product’s environmental impact. GOTS provides rules and tools for fostering responsible business practices and to support businesses to comply with domestic and international laws and beyond. The current GOTS Version 7.0 includes rigorous criteria for the protection of human, employment and social rights, as well as the environment and climate. By being certified to GOTS 7.0 and selling GOTS-labelled goods, companies are demonstrating their commitment to sustainability and human rights.

The Global Organic Textile Standard (GOTS) applauds the European Parliament's vote to ban unverified 'green' product labels by enforcing stricter rules to back green claims and labels. By obligating companies to submit evidence about environmental marketing claims – including advertising and labelling products as ‘biodegradable’, ‘less polluting’, ‘water saving’, or having ‘bio-based content’ – consumers will be able to make better informed decisions about the sustainability of their purchases.

Consumers need protection from greenwashing and false claims about a product’s environmental impact. GOTS provides rules and tools for fostering responsible business practices and to support businesses to comply with domestic and international laws and beyond. The current GOTS Version 7.0 includes rigorous criteria for the protection of human, employment and social rights, as well as the environment and climate. By being certified to GOTS 7.0 and selling GOTS-labelled goods, companies are demonstrating their commitment to sustainability and human rights.

Source:

GOTS (Global Organic Textile Standard)

DITF: CO2-negative construction with new composite material Photo: DITF
Structure of the wall element
20.03.2024

DITF: CO2-negative construction with new composite material

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO2 balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO2 balance of the new building material is actually negative, making it possible to construct CO2-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO2 storage, which plays a significant role in the CO2 balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO2 balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO2 balance of 157 CO2 equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

Source:

Deutsche Institute für Textil- und Faserforschung

Konzept Recycling Center Grafik: Sächsisches Textilforschungsinstitut e.V. (STFI)
20.03.2024

Abschlussmeeting im SmartERZ-Projekt TRICYCLE

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Vorhaben wurde ein technologisches Recyclingkonzept für die zukünftig entstehenden smarten Produkte sowie die in der Produktion entstehenden Abfälle in der Region entwickelt. Ziel war die Entwicklung standardisierter, skalierbarer Verfahren, mit größtmöglichem Automatisierungsgrad unter Einhaltung der geltenden Gesetze, Verordnungen und Normen. Das Projekt lief vom 01.09.2021 bis 31.12.2023. Im Abschlussmeeting einer 28-monatigen Projektarbeit wurden den Teilnehmenden die Ergebnisse vorgestellt. Die Arbeit beinhaltet das Centerkonzept sowie eine Datenerhebung zu potenziell regional verfügbaren Mengen und anschließenden Verwertungsoptionen sowie die Entwicklung gewisser Designrichtlinien für das Recycling.

Eingegossen in die bestehenden Strukturen der SmartERZ Region und darüber hinaus, ist das Konzept für ein Center entstanden, welches als eine Art Drehkreuz für regionale Abfälle rund um diese Thematik fungieren soll. Darüber können Abfallströme gesammelt, erstbehandelt und für das rohstoffliche Recycling vorbereitet werden. Die Erstbehandlung schließt Technologien der Qualitätskontrolle/Qualitätsmanagement, Zerkleinerung, Pelletierung und Kompaktierung ein. Über dieses Drehkreuz sollen auch Kleinstmengen wirtschaftlich attraktiven Verwertungswegen und einer Weiterverwendung zugänglich gemacht werden.

Neben der stofflichen Vernetzung beinhaltet das Konzept für das Recycling Center die Voraussetzungen um als Vernetzungsstelle rund um die Thematik (textiler) Kreislaufwirtschaft zu fungieren. Unternehmen, Forschung, Lehre und öffentliche Einrichtungen können und sollen in Diskurs treten, um die bestmöglichen Verwertungsoptionen für entsprechende Abfälle zu finden, aber auch die Vermeidung und Wiederverwendung von Abfällen voranzutreiben, langlebige Produkte zu schaffen und Wissen zu teilen.

Die Projektpartner stimmen überein, dass nun nach Wegen gesucht werden muss, um das entstandene Konzept umzusetzen. Zusätzlich bahnen sich bereits Kooperationen mit anderen Forschungsvorhaben an. Johannes Leis als Projektleiter TRICYCLE und Dr. Stefan Minar seitens des Projekts WIRreFa sehen nun die Chance, gar die Notwendigkeit, die offensichtlichen Schnittstellen beider Projekte so schnell wie möglich zusammenzubringen. Vielleicht noch während der zweiten Phase des Projektes WIReFa.

More information:
SmartErz TRICYCLE STFI BMBF Recycling
Source:

P3N MARKETING GMBH

Polartec: New High-Performance fabric with recycled materials (c) Polartec
20.03.2024

Polartec: New High-Performance fabric with recycled materials

Polartec® introduces Polartec® Power Shield™ RPM, made from recycled polyester materials and the Polartec® 200, and Micro Series recycled fleeces featuring Polartec® Shed Less™ technology.

Polartec® Power Shield™ RPM is a recycled polyester fabric that offers waterproofness, wind-proofness and breathability, and also ensures high-stretch comfort and resilience. With its high range of motion and highly durable 100% recycled polyester membrane designed for high intensity activities, Power Shield™ RPM elevates end use comfort and is made for runners, cyclists and golfers who refuse to trade performance for sustainability.

Polartec® Shed Less™ technology is an innovative process that decreases fiber fragment shedding during home laundering up to 85%* without compromising the performance or durability of the fabrics it’s applied to. Less shedding means fewer microfiber fragments end up in the oceans and waterways.

Polartec® introduces Polartec® Power Shield™ RPM, made from recycled polyester materials and the Polartec® 200, and Micro Series recycled fleeces featuring Polartec® Shed Less™ technology.

Polartec® Power Shield™ RPM is a recycled polyester fabric that offers waterproofness, wind-proofness and breathability, and also ensures high-stretch comfort and resilience. With its high range of motion and highly durable 100% recycled polyester membrane designed for high intensity activities, Power Shield™ RPM elevates end use comfort and is made for runners, cyclists and golfers who refuse to trade performance for sustainability.

Polartec® Shed Less™ technology is an innovative process that decreases fiber fragment shedding during home laundering up to 85%* without compromising the performance or durability of the fabrics it’s applied to. Less shedding means fewer microfiber fragments end up in the oceans and waterways.

Polartec® Micro™ Series is engineered to provide long-lasting comfort in a vast range of conditions and activity levels. This recycled fleece with Polartec® Shed Less™ technology is made from a lofted structure with thermal air pockets to retain warmth without inhibiting breathability. Polartec® Micro™ Series is both hydrophobic and fast drying.

Polartec® 200 Series is the modern version of the original PolarFleece®, which in 1993 became the first performance fleece knit from yarn made from recycled plastic bottles. It has a great resiliency, lightweight warmth and a fast drying time.

More information:
Polartec Shed Less Fleece polyester
Source:

Polartec

Messestand Foto: Messe Frankfurt / Jean-Luc Valentin
19.03.2024

Neues Techtextil Areal Nature Performance

In allen Anwendungsfeldern technischer Textilien und textiler Technologien gewinnt der Aspekt Nachhaltigkeit wachsende Bedeutung. Anlass für die internationale Leitmesse Techtextil für ihre Veranstaltung im April 2024 darauf einen besonderen Fokus zu setzen.

In allen Anwendungsfeldern technischer Textilien und textiler Technologien gewinnt der Aspekt Nachhaltigkeit wachsende Bedeutung. Anlass für die internationale Leitmesse Techtextil für ihre Veranstaltung im April 2024 darauf einen besonderen Fokus zu setzen.

Ob biobasierte, recycelte oder abbaubare Materialien, Kreislaufwirtschaft oder regeneratives Design: Die Entwicklung nachhaltiger Lösungen in der Textilindustrie schreitet zügig voran. Nachhaltige Produkte und Verfahren stehen heute in der Performance ihren herkömmlichen Konkurrenten in nichts nach und rechnen sich zunehmend auch ökonomisch. Mehr als 15 Prozent der Aussteller auf der Techtextil haben bereits natürliche Fasern und Materialien in ihrem Sortiment.
 
Auf dem Areal „Nature Performance“ in der Halle 9.1, Produktsegment Fibres & Yarns, präsentieren die teilnehmenden Aussteller alternative, recyclingfähige und nachhaltige Materialien, die über zukunftsfähige funktionale Eigenschaften verfügen. Das Spektrum reicht von Naturfasern und -Materialien bis zu biobasierten Fasern und Materialien. Im Zentrum der Ausstellerpräsentationen steht deren Performance für die verschiedensten Anwendungsbereiche von der Architektur, Bau, Mobilität und Medizin bis zur Bekleidungsindustrie.

Das Areal Nature Performance ist Teil des Econogy Angebots, das die Messe Frankfurt für ihre weltweiten Textilveranstaltungen eingeführt hat. Das neue Label fasst die zahlreichen Netzwerk- und Informationsformate zum Thema Nachhaltigkeit zusammen und schafft Transparenz durch einheitliche Bewertungskriterien. Der Begriff Econogy steht für die untrennbare Verbindung zwischen Ökonomie und Ökologie und gibt damit die Ausrichtung des zukunftsweisenden Leitthemas an.

Source:

Messe Frankfurt

Professor Dr.-Ing. Markus Milwich Photo: DITF
Professor Dr.-Ing. Markus Milwich.
19.03.2024

Markus Milwich represents "Lightweight Design Agency for Baden-Württemberg"

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

The use of lightweight materials in combination with new production technologies will significantly reduce energy consumption in transportation, the manufacturing industry and the construction sector. Resources can be saved through the use of new materials. As a cross-functional technology, lightweight construction covers entire value chain from production and use to recycling and reuse.

The aim of the state government is to establish Baden-Württemberg as a leading provider of innovative lightweight construction technologies in order to strengthen the local economy and secure high-quality jobs.

Among others, the "Lightweight Construction Alliance Baden-Württemberg" will continue the nationally renowned "Lightweight Construction Day", which acts as an important source of inspiration for a wide range of lightweight construction topics among business and scientific community.

Professor Milwich, an expert with many years of experience and an excellent network beyond the State's borders, has been recruited for this task. In his role, Milwich also represents the state of Baden-Württemberg on the Strategy Advisory Board of the Lightweight Construction Initiative of the Federal Ministry for Economic Affairs and Climate Action, which supports the cross functional-technology and efficient transfer of knowledge between the various nationwide players in lightweight construction and serves as a central point of contact for entrepreneurs nationwide for all relevant questions.

From 2005 to 2020, Professor Milwich headed the Composite Technology research at the DITF, which was integrated into the Competence Center Polymers and Fiber Composites in 2020. He is also an honorary professor at Reutlingen University, where he teaches hybrid materials and composites. "Lightweight design is an essential aspect for sustainability, environmental and resource conservation. I always showcase this in research and teaching and now also as a representative of the lightweight construction community in Baden-Württemberg," emphasizes Professor Milwich.

Source:

Deutsche Institute für Textil- und Faserforschung

18.03.2024

Lenzing: Combined annual and sustainability report 2023

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

The results for the 2023 financial year were already published. The report was once again prepared in digital form and is now available.

Source:

Lenzing AG

Thermore: Stretch-Wattierung Freedom (c) Thermore
Thermore® Freedom
18.03.2024

Thermore: Launch von Stretch-Wattierung Freedom

Die Thermore-Gruppe kündigte das Debüt ihrer dynamischsten Stretch-Wattierung "Freedom" an. Diese Wattierung besteht zu 50 % aus recyceltem Post-Consumer-Polyester und bietet Dehnbarkeit und Wärme für eine Vielzahl von Einsatzzwecken, darunter Bergsport, Laufen, Golf, Pendeln, Angeln und Jagen, Radfahren und anderer Aktivitäten.

Dynamometertests zeigen, dass diese Wattierung – die in vier Gewichtungen von 60 bis 150 Gramm/qm erhältlich ist – eine gute Elastizität aufweist und immer wieder auf 100 % ihrer Größe vor der Dehnung zurückspringt.

Die neue Freedom-Wattierung bietet ein hohes Maß an Komfort und Funktionalität. Sie ist maschinenwaschbar, kann chemisch gereinigt werden und ist somit für den Verbraucher pflegeleicht. Aufgrund der hohen Beständigkeit gegen Fasermigration ist sie für Produktentwickler designfreundlich. Außerdem ist sie GRS-zertifiziert.

Die Thermore-Gruppe kündigte das Debüt ihrer dynamischsten Stretch-Wattierung "Freedom" an. Diese Wattierung besteht zu 50 % aus recyceltem Post-Consumer-Polyester und bietet Dehnbarkeit und Wärme für eine Vielzahl von Einsatzzwecken, darunter Bergsport, Laufen, Golf, Pendeln, Angeln und Jagen, Radfahren und anderer Aktivitäten.

Dynamometertests zeigen, dass diese Wattierung – die in vier Gewichtungen von 60 bis 150 Gramm/qm erhältlich ist – eine gute Elastizität aufweist und immer wieder auf 100 % ihrer Größe vor der Dehnung zurückspringt.

Die neue Freedom-Wattierung bietet ein hohes Maß an Komfort und Funktionalität. Sie ist maschinenwaschbar, kann chemisch gereinigt werden und ist somit für den Verbraucher pflegeleicht. Aufgrund der hohen Beständigkeit gegen Fasermigration ist sie für Produktentwickler designfreundlich. Außerdem ist sie GRS-zertifiziert.

More information:
Thermore Wattierung Stretchstoff
Source:

Thermore

GoodTextiles Foundation: Improving drinking water supply in Uganda (c) Aid by Trade Foundation
Bio-Sand-Waterfilters
18.03.2024

GoodTextiles Foundation: Improving drinking water supply in Uganda

Together with Cotton made in Africa (CmiA) and the cotton company MMP Agro, the GoodTextiles Foundation is realising a project to improve the drinking water supply in Uganda, Africa. Bio-sand-waterfilters are being installed to gently purify the water from existing sources. In addition, the partners are training the community's farmers and craftsmen in how to operate the water filters. They then learn how to build new water filters.

In 2016, the textile company Dibella established the GoodTextiles Foundation with the aim of making textile value chains more sustainable. It raises donations and implements its own funding projects to benefit people at all stages of the textile industry.

As part of a joint project between the GoodTextiles Foundation, the Aid by Trade Foundation (AbTF) (owner of the CmiA standard) and MMP Agro, farmers who grow CmiA cotton in the districts of Abim, Kaplebyong, Dokolo and Kaberamaido in north-east Uganda are now receiving a total of around 1,000 bio-sand-waterfilters. Around 1,000 CmiA farmers, mainly women and the members of their households (an estimated 10,000 community members) benefit from this.

Together with Cotton made in Africa (CmiA) and the cotton company MMP Agro, the GoodTextiles Foundation is realising a project to improve the drinking water supply in Uganda, Africa. Bio-sand-waterfilters are being installed to gently purify the water from existing sources. In addition, the partners are training the community's farmers and craftsmen in how to operate the water filters. They then learn how to build new water filters.

In 2016, the textile company Dibella established the GoodTextiles Foundation with the aim of making textile value chains more sustainable. It raises donations and implements its own funding projects to benefit people at all stages of the textile industry.

As part of a joint project between the GoodTextiles Foundation, the Aid by Trade Foundation (AbTF) (owner of the CmiA standard) and MMP Agro, farmers who grow CmiA cotton in the districts of Abim, Kaplebyong, Dokolo and Kaberamaido in north-east Uganda are now receiving a total of around 1,000 bio-sand-waterfilters. Around 1,000 CmiA farmers, mainly women and the members of their households (an estimated 10,000 community members) benefit from this.

Source:

GoodTextiles Foundation

Freudenberg showcases sustainable solutions at Techtextil 2024 (c) Freudenberg Performance Materials
Freudenberg´s sustainable carrier material for green roofs on urban buildings is made from renewable resources
15.03.2024

Freudenberg showcases sustainable solutions at Techtextil 2024

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Freudenberg Performance Materials (Freudenberg) is showcasing solutions for the automotive, building, apparel, filtration and packaging industries at this year’s Techtextil in Frankfurt am Main from April 23 – 26.

Sustainable nonwoven for car seats
One innovation highlight at Techtextil is a novel Polyester nonwoven material for car seat padding. Also available as a nonwoven composite with PU foam, it is not only easier for car seat manufacturers to handle during the mounting process, but also ensures better dimensional stability as well as providing soft and flexible padding. It has a minimum 25 percent recycled content, for example, by reusing nonwoven clippings and waste, and is fully recyclable. Full supply chain transparency enables customers to trace and verify the content of the nonwoven and thus ensures a responsible production process. The Freudenberg experts will also be presenting several other nonwoven solutions made of up to 80 percent recycled materials that can be used in car seat manufacturing.

Biocarrier for green roofs
Freudenberg is showcasing a sustainable carrier material for green roofs on urban buildings at the trade fair. The carrier is made from polylactide, i.e. from renewable resources. When filled with soil, it provides a strong foothold to root systems, enabling the growth of lightweight sedum blankets that can be rolled out to provide instant green roofs. These roofs not only help counter urban heat, they also improve stormwater management and regulate indoor temperatures.

From textile waste to padding
The company extended its circular thermal wadding product range with the release of comfortemp® HO 80xR circular, a wadding made from 70 percent recycled polyamide from discarded fishing nets, carpet flooring and industrial plastic. Because polyamide 6, also known as nylon, retains its performance characteristics after multiple recycling processes, the fibers can be used again and again to manufacture performance sporting apparel, leisurewear and luxury garments.

Packaging solutions with various sustainability benefits
Freudenberg is also showcasing products for sustainable packaging and filtration solutions. The long-lasting Evolon® technical packaging series is a substitute for disposable packaging used in the transport of sensitive industrial items such as automotive parts. The material is made from up to 85 percent recycled PET. A further highlight at Techtextil are Freudenberg’s fully bio-based solutions for manufacturing dessicant bags. The binder-free material based on bio-fibers is also industrially compostable.
In addition, the experts will be giving trade fair visitors an insight into Freudenberg’s filtration portfolio.

Source:

Freudenberg Performance Materials

RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

13.03.2024

IDEA®25: Call for abstracts

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for abstracts for IDEA®, April 29-May 1, 2025, Miami Beach Convention Center, Miami Beach, Florida. IDEA attracts thousands of nonwoven professionals from all functional areas spanning the entire supply chain.

The theme for IDEA25 is “Nonwovens for a Healthier Planet” highlighting nonwoven advancements in sustainability.

Product developers, designers, engineers, technical scouts, and marketing professionals accountable for their product’s environmental impact will attend IDEA. Presentations will focus on responsible sourcing, innovations in sustainability, and end-of-life solutions for nonwovens and its related industries.

A few examples of topics for consideration are:

RESPONSIBLE SOURCING

  • Natural Fibers (Cotton, Hemp, Bamboo, Banana, Wood Pulp, Regenerated Cellulose, Wool, Fur, Chitin, Feathers)
  • Polymers (Biopolymers, Regenerated and Recycled polymers, Unconventional and Alternatives to Traditional Polymers)
  • Sustainable Chemistries (finishes, lubricants, adhesives, and additives)

INNOVATIONS IN SUSTAINABILITY

  • Process Improvements with Sustainability Impact (reduced waste, reduced energy, reduced water consumption)
  • Product Design Improvements with Sustainability Impact (lightweighting, designs for end-of-life, “good enough” design)

END-OF-LIFE SOLUTIONS

  • End-of-Life or Next-Life Considerations (compostability, biodegradability, recycling, advanced recycling and circularity)
  • Presenting is an opportunity for technical professionals to showcase pioneering research, innovative solutions, and expert insights with technology scouts.

Abstracts must be submitted via the INDA website by June 7, 2024.

Source:

INDA - Association of the Nonwoven Fabrics Industry