From the Sector

Reset
1550 results
BOGNER: Golf-Kollektion mit Bernhard Langer (c) Willy BOGNER GmbH
Golflegende Bernhard Langer
27.03.2024

BOGNER: Golf-Kollektion mit Bernhard Langer

Seit mehr als vier Jahrzehnten verbindet BOGNER eine Partnerschaft mit der Golflegende Bernhard Langer. Diese Zusammenarbeit wird mit der Golf Capsule Collection "The Masterclass" für die Spring/Summer 2024 Saison auf ein neues Niveau gehoben.

Die BOGNER Bernhard Langer Masterclass garantiert optimale Bewegungsfreiheit und maximale Performance auf dem Green, ausgewählt und getestet von Bernhard Langer. Die Golfstyles für Herren sorgen für luxuriösen Komfort und lockere Silhouetten.

Seit mehr als vier Jahrzehnten verbindet BOGNER eine Partnerschaft mit der Golflegende Bernhard Langer. Diese Zusammenarbeit wird mit der Golf Capsule Collection "The Masterclass" für die Spring/Summer 2024 Saison auf ein neues Niveau gehoben.

Die BOGNER Bernhard Langer Masterclass garantiert optimale Bewegungsfreiheit und maximale Performance auf dem Green, ausgewählt und getestet von Bernhard Langer. Die Golfstyles für Herren sorgen für luxuriösen Komfort und lockere Silhouetten.

Source:

Willy BOGNER GmbH

Eva Maria Schaffner und Marc Leinweber empfingen SPD-MdB Alexander Bartz (Mitte) zu einem Austausch bei Shoe City in Berlin. Foto: BTE
Eva Maria Schaffner und Marc Leinweber empfingen SPD-MdB Alexander Bartz (Mitte) zu einem Austausch bei Shoe City in Berlin.
26.03.2024

BTE startet Informationsoffensive für Politiker

Der BTE sieht längst nicht alle Politiker als ausreichend informiert an über die komplexen Tätigkeiten und die gesellschaftliche Funktion des Textil- und Schuhhandels am jeweiligen Standort. Als Folge werde die gesamtwirtschaftliche Bedeutung der Branche mitunter eher gering eingeschätzt, was zu einer unzureichenden politischen Unterstützung gerade in schwierigen Zeiten – siehe Corona – führen könne.
 
Der Verband hat sich daher zu einer Informationsoffensive in Richtung der Politik entschlossen. Angeboten und organisiert werden dazu sog. „Store Visits“, bei denen interessierte Politiker hinter die Kulissen von Mode- oder Schuhgeschäften schauen und sich mit den Unternehmern intensiv über aktuelle Themen und Problemstellungen austauschen können – ggf. mit Begleitung des BTE. Erfahrungsgemäß sind solche Treffen wirkungsvoller als Gespräche nur zwischen Verbandsfunktionären und Politikern.
 

Der BTE sieht längst nicht alle Politiker als ausreichend informiert an über die komplexen Tätigkeiten und die gesellschaftliche Funktion des Textil- und Schuhhandels am jeweiligen Standort. Als Folge werde die gesamtwirtschaftliche Bedeutung der Branche mitunter eher gering eingeschätzt, was zu einer unzureichenden politischen Unterstützung gerade in schwierigen Zeiten – siehe Corona – führen könne.
 
Der Verband hat sich daher zu einer Informationsoffensive in Richtung der Politik entschlossen. Angeboten und organisiert werden dazu sog. „Store Visits“, bei denen interessierte Politiker hinter die Kulissen von Mode- oder Schuhgeschäften schauen und sich mit den Unternehmern intensiv über aktuelle Themen und Problemstellungen austauschen können – ggf. mit Begleitung des BTE. Erfahrungsgemäß sind solche Treffen wirkungsvoller als Gespräche nur zwischen Verbandsfunktionären und Politikern.
 
Die Premiere der BTE-Store Visits fand am 21. März statt. Alexander Bartz, SPD-Bundestagsabgeordneter, Mitglied des Wirtschaftsausschusses des Deutschen Bundestag und als ehemaliger City-Manager Einzelhandels-erfahren, traf sich mit Marc Leinweber, Geschäftsführer von Aktiv-Schuh, und Eva Maria Schaffner, Leiterin des Berliner BTE-Büros, in der Filiale von Shoe City in der Berliner Friedrichstraße. Dabei kam es zu einem Austausch über aktuelle Themen wie Bürokratieabbau, Mietentwicklung, Fachkräftemangel sowie Entlastungen bei Energie und Steuern.
 
Weitere Store Visits werden folgen. Der BTE ist dazu in Gesprächen mit ausgewählten Bundestags-Parteien.

Source:

BTE Handelsverband Textil Schuhe Lederwaren

adidas: Y-3 and Real Madrid present Matchwear Collection (c) adidas AG
25.03.2024

adidas: Y-3 and Real Madrid present Matchwear Collection

Having launched a collaborative travel collection earlier this year, Y-3 and Real Madrid come together once again and present their collaborative Matchwear collection.

The collection itself is highlighted by a purple 4th kit for both the Real Madrid Men’s and Women’s teams, constructed with moisture wicking HEAT.RDY technology to keep players feeling dry while performing on the biggest stage. Story and identity come together in the Matchwear kit through the colors of Real Madrid , where purple is a key shade within the club’s DNA. In addition to the 4th kit, the collection features two goalkeeper kits – one in black and one in orange – as well as a white pre-match selection including a top, a pair of shorts, and an anthem jacket.

From the pitch to the stands, Y-3 has also curated a selection of fanwear items, including a T-shirt, a hoodie, a cross body bag, a cap, and a scarf.

Alongside the collection, Y-3 and adidas are set to introduce a special edition Predator boot and Goalkeeper gloves.

Having launched a collaborative travel collection earlier this year, Y-3 and Real Madrid come together once again and present their collaborative Matchwear collection.

The collection itself is highlighted by a purple 4th kit for both the Real Madrid Men’s and Women’s teams, constructed with moisture wicking HEAT.RDY technology to keep players feeling dry while performing on the biggest stage. Story and identity come together in the Matchwear kit through the colors of Real Madrid , where purple is a key shade within the club’s DNA. In addition to the 4th kit, the collection features two goalkeeper kits – one in black and one in orange – as well as a white pre-match selection including a top, a pair of shorts, and an anthem jacket.

From the pitch to the stands, Y-3 has also curated a selection of fanwear items, including a T-shirt, a hoodie, a cross body bag, a cap, and a scarf.

Alongside the collection, Y-3 and adidas are set to introduce a special edition Predator boot and Goalkeeper gloves.

More information:
adidas Y-3 Sportswear
Source:

adidas AG

25.03.2024

Texhibition Istanbul: Fifth edition successfully concluded

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

In addition to well-known companies such as Almodo, Bahariye, BTD, Can Textile, Iskur, Kipaş, Menderes, Söktaş, Yünsa, Zorlu, İpeker a large number of other export-oriented companies from the segments of textiles (woven fabrics, knitting) presented their latest designs and products.

Visitors
25,752 visitors came from over 112 countries, 41.8% from the European Union (including Germany, Italy, the Netherlands, Spain, Romania etc.) and Great Britain, Ukraine,26.5% from Asia (including Russia etc.), 14.8% from the Middle East (including Jordan, United Arab Emirates, Saudi Arabia) 10.7% from North Africa (including Algeria, Tunisia etc.), 3.1% from North America (United States, Canada), 3.1% from South America and other countries.

American buyers from the USA and Canada in particular, but also a large number of Mexican and Colombian buyers took advantage of the numerous match-making opportunities at Texhibition. Many B2B meetings took place and led to numerous orders being placed, including from key accounts such as Alexander Wang, Asos, Forever 21, Sainsbury's, Veronica Beard etc.

More information:
Texhibition Istanbul Yarns Denim
Source:

JANDALI

22.03.2024

Fashion for Good: Ten new innovators for 2024 programme

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

  • Algreen Ltd: Algreen co-develops alternative materials from algae and biobased sources that can replace fossil-based products such as PU.
  • Balena: Balena creates biodegradable partly biobased polymers for footwear outsoles.
  • Epoch Biodesign: Epoch Biodesign is an enzymatic recycler of PA66 and PA6 textile waste.
  • Fibre52: Fibre52 is a bio-based solution replacing traditional bleach prepared-for-dyeing and dye processes.
  • Gencrest BioProducts Pvt Ltd: Gencrest works with various agri-residues to convert them into textile-grade fibres using their enzymatic technology.
  • HeiQ AeoniQ: HeiQ AeoniQ™ is a continuous cellulose filament yarn with enhanced tensile properties.
  • Nanollose - Nullabor: Nullarbor™Lyocell is developed from microbial cellulose which is converted into pulp pulp to produce a lyocell fibre with their partner Birla Cellulose.  
  • REGENELEY:  REGENELEY pioneers advanced shoe sole recycling technologies by separating and recycling EVA, TPU, and rubber components found in footwear.
  • Samsara Eco: Samsara Eco is an enzymatic recycler of PA66 and PET textile waste.
  • SEFF: SEFF Fibre produces cottonised fibres and blends of hemp fabrics utilising a patented HVPED process.
Source:

Fashion for Good

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

Polartec: New High-Performance fabric with recycled materials (c) Polartec
20.03.2024

Polartec: New High-Performance fabric with recycled materials

Polartec® introduces Polartec® Power Shield™ RPM, made from recycled polyester materials and the Polartec® 200, and Micro Series recycled fleeces featuring Polartec® Shed Less™ technology.

Polartec® Power Shield™ RPM is a recycled polyester fabric that offers waterproofness, wind-proofness and breathability, and also ensures high-stretch comfort and resilience. With its high range of motion and highly durable 100% recycled polyester membrane designed for high intensity activities, Power Shield™ RPM elevates end use comfort and is made for runners, cyclists and golfers who refuse to trade performance for sustainability.

Polartec® Shed Less™ technology is an innovative process that decreases fiber fragment shedding during home laundering up to 85%* without compromising the performance or durability of the fabrics it’s applied to. Less shedding means fewer microfiber fragments end up in the oceans and waterways.

Polartec® introduces Polartec® Power Shield™ RPM, made from recycled polyester materials and the Polartec® 200, and Micro Series recycled fleeces featuring Polartec® Shed Less™ technology.

Polartec® Power Shield™ RPM is a recycled polyester fabric that offers waterproofness, wind-proofness and breathability, and also ensures high-stretch comfort and resilience. With its high range of motion and highly durable 100% recycled polyester membrane designed for high intensity activities, Power Shield™ RPM elevates end use comfort and is made for runners, cyclists and golfers who refuse to trade performance for sustainability.

Polartec® Shed Less™ technology is an innovative process that decreases fiber fragment shedding during home laundering up to 85%* without compromising the performance or durability of the fabrics it’s applied to. Less shedding means fewer microfiber fragments end up in the oceans and waterways.

Polartec® Micro™ Series is engineered to provide long-lasting comfort in a vast range of conditions and activity levels. This recycled fleece with Polartec® Shed Less™ technology is made from a lofted structure with thermal air pockets to retain warmth without inhibiting breathability. Polartec® Micro™ Series is both hydrophobic and fast drying.

Polartec® 200 Series is the modern version of the original PolarFleece®, which in 1993 became the first performance fleece knit from yarn made from recycled plastic bottles. It has a great resiliency, lightweight warmth and a fast drying time.

More information:
Polartec Shed Less Fleece polyester
Source:

Polartec

Rat für Formgebung: Nachwuchspreis „one&twenty“ für 21 Designtalente (c) Lilian Onstenk
„ButtonUp“ von Lilian Onstenk
20.03.2024

Rat für Formgebung: Nachwuchspreis „one&twenty“ für 21 Designtalente

Mit dem internationalen Wettbewerb „one&twenty“ ehrt die Stiftung Rat für Formgebung jährlich herausragende Designstudierende und Absolvent*innen aus den Bereichen Produktdesign und Lifestyle. Die 21 Winner-Projekte 2024 demonstrieren eindrucksvoll, wie entschlossen der Nachwuchs nach Lösungen für die drängenden Herausforderungen unserer Zeit sucht. Die ausgezeichneten Projekte wurden aus mehr als 800 Einreichungen aus über 50 Ländern ausgewählt.

Die 21 ausgezeichneten Projekte verdeutlichen, dass Nachhaltigkeit kein nebensächlicher Gedanke, sondern ein integraler Bestandteil des Designprozesses ist. Gleich mehrere Winner setzten sich mit dem Problem der wachsenden Wegwerfkultur – in der eine Reparatur defekter Objekte finanziell nicht rentabler ist als ein Neukauf – auseinander. Die Lösung liegt in Ansätzen des Circular Design: Wenn Objekte von vorneherein aus leicht auswechselbaren Komponenten bestehen, ist die Reparatur einfacher und attraktiver als die Entsorgung.

Mit dem internationalen Wettbewerb „one&twenty“ ehrt die Stiftung Rat für Formgebung jährlich herausragende Designstudierende und Absolvent*innen aus den Bereichen Produktdesign und Lifestyle. Die 21 Winner-Projekte 2024 demonstrieren eindrucksvoll, wie entschlossen der Nachwuchs nach Lösungen für die drängenden Herausforderungen unserer Zeit sucht. Die ausgezeichneten Projekte wurden aus mehr als 800 Einreichungen aus über 50 Ländern ausgewählt.

Die 21 ausgezeichneten Projekte verdeutlichen, dass Nachhaltigkeit kein nebensächlicher Gedanke, sondern ein integraler Bestandteil des Designprozesses ist. Gleich mehrere Winner setzten sich mit dem Problem der wachsenden Wegwerfkultur – in der eine Reparatur defekter Objekte finanziell nicht rentabler ist als ein Neukauf – auseinander. Die Lösung liegt in Ansätzen des Circular Design: Wenn Objekte von vorneherein aus leicht auswechselbaren Komponenten bestehen, ist die Reparatur einfacher und attraktiver als die Entsorgung.

Dem Problem der steigenden Kleidungsabfälle stellt sich „ButtonUp“ von Lilian Onstenk entgegen. Die Designerin möchte das Auswechseln von Knöpfen leichter machen, da defekte Verschlüsse ein Hauptgrund für das Wegwerfen von Textilien sind. Der Aluminium-Verschluss ButtonUp wird nicht eingenäht, was die Handhabung für Nutzer*innen vereinfacht, den Austausch ohne Nadel und Faden möglich macht und schlussendlich für ein in Einzelteile getrenntes Recycling sorgt.

Die Winner von one&twenty 2024 sind:

  • Jesse Altmann, Klara Schneider & Valentina Lenk, Morari, Fachhochschule Potsdam, Deutschland
  • Marcus Angerer, Layer, ECAL, Schweiz
  • Eva Benamou & Antonia Gauß, Off the Grid, Bezalel Art and Design Academy, Israel & Akademie der Bildenden Künste Stuttgart, Deutschland
  • Esther Betz, Elisa Bessega & Sylvia Chen, Mantis, Bauhaus-Universität Weimar, Deutschland, Politecnico di Milano, Italien & Pratt Institute, USA
  • Daniela Cimen, RE•IN•WASTE, Hochschule Hof, Deutschland
  • Marcus Götschl, New Gen, Schulen für Holz und Gestaltung Bezirk Oberbayern, Deutschland
  • Gaspard Fleury, Soft Objects, The Swedish School of Textiles, Schweden
  • Sofia Kocher, SATTEL, Universität für angewandte Kunst, Österreich
  • Lirjeta Maxhuni, GyneCare, ECAL, Schweiz
  • Juni Sun Neyenhuys, Designing the Afterlife, Weißensee Kunsthochschule Berlin, Deutschland
  • Nir Neria, Copine, Bezalel Art and Design Academy, Israel
  • Lilian Onstenk, ButtonUp, ECAL, Schweiz
  • Emilie Palle Holm, [ ORIORI ] :: folding woven textile, The Swedish School of Textiles, Schweden
  • Jan Penka, YSHELF, Universität für angewandte Kunst, Österreich
  • Cornelius Richter, STUHL, Folkwang Universität der Künste, Deutschland
  • Josua Roters, Cable Mania, Kunsthochschule Burg Giebichenstein, Deutschland
  • Valerio Sampognaro, Radiator Flask, Hochschule für bildende Künste Hamburg, Deutschland
  • Lion Sanguinette & Jonathan Stein, Opencyclone, Kunsthochschule Burg Giebichenstein, Deutschland
  • Manuel Steffan, Running on (h)air, ECAL, Schweiz
  • Moritz Walter, Hotspot, Weißensee Kunsthochschule Berlin, Deutschland
  • Zixuan Zhou, ANTI throw-away mentality, Akademie der Bildenden Künste Stuttgart, Deutschland

Am 15. April werden die Winner an einem neuen Ausstellungsort im Mailänder Viertel Brera geehrt. Neben den Winnern hat die Jury bestehend aus den Designer*innen Hanne Willmann (Studio Hanne Willmann), Eva Marguerre und Marcel Besau (Studio Besau-Marguerre), Philipp Mainzer (E15), Arianna Lelli Mami und Chiara Di Pinto (Studiopepe), Daniera ter Haar und Christoph Brach (Raw Color), Min Chen (Chen Min Office), Yoko Choy (Collective Contemporist, China Editor Wallpaper*), Joa Herrenknecht (Studio Joa Herrenknecht) und Sabine Marcelis (Studio Sabine Marcelis) ein Projekt als „Best of Best“ ausgezeichnet.

Vom 15.–21. April werden alle 21 Projekte in einer öffentlichen Ausstellung während der Milan Design Week in Brera präsentiert.

 

Source:

Rat für Formgebung

Das Team des FTB der Hochschule Niederrhein zu Besuch bei der Firma Bache Innovative, mit der es im Rahmen von „KnitCycle“ Recycling-Versuche durchführt. Dazu wurden erste textile Produktionsabfälle klassifiziert und sortiert. Foto Hochschule Niederrhein
Das Team des FTB der Hochschule Niederrhein zu Besuch bei der Firma Bache Innovative, mit der es im Rahmen von „KnitCycle“ Recycling-Versuche durchführt. Dazu wurden erste textile Produktionsabfälle klassifiziert und sortiert.
19.03.2024

KnitCycle: Forschungsprojekt für kreislaufgerechte Flachstrick-Textilien

87 Prozent des weltweiten Textilabfalls in der Bekleidungsindustrie landen auf Deponien oder werden verbrannt. Von den 13 Prozent, die noch mechanisch weiterverarbeitet werden, enden die meisten Alttextilien als Dämmmaterial (Downcycling). Nicht einmal ein Prozent werden zu hochwertigen Fasern aufbereitet, aus denen wieder neue Kleidung entsteht.
 
Gemeinsam mit Bache Innovative als Antragstellerin hat die Hochschule Niederrhein (HSNR) ein großes Forschungsprojekt gestartet: „KnitCycle – kreislaufgerechte Produktentwicklung für Flachstricktextilien“. Die Deutsche Bundesstiftung Umwelt (DBU) fördert das Vorhaben für zwei Jahre mit insgesamt rund 290.000 Euro, davon fließen 225.000 Euro an die HSNR.
 
Wo Textilabfall recycelt und damit in den Kreislauf zurückgeführt werden kann, muss auch weniger entsorgt werden. Werden Produktionsabfälle und -überhänge vernichtet, ist das nicht nur teuer für die Unternehmen. Für die Herstellung neuer Kleidung müssen auch wieder neue Fasern erzeugt werden. Je nach Faserstoff kommt es dabei zu großem Wasserverbrauch, starkem Pestizid- und Düngemitteleinsatz sowie langen Transportwegen mit hohen CO2-Emissionen.  

87 Prozent des weltweiten Textilabfalls in der Bekleidungsindustrie landen auf Deponien oder werden verbrannt. Von den 13 Prozent, die noch mechanisch weiterverarbeitet werden, enden die meisten Alttextilien als Dämmmaterial (Downcycling). Nicht einmal ein Prozent werden zu hochwertigen Fasern aufbereitet, aus denen wieder neue Kleidung entsteht.
 
Gemeinsam mit Bache Innovative als Antragstellerin hat die Hochschule Niederrhein (HSNR) ein großes Forschungsprojekt gestartet: „KnitCycle – kreislaufgerechte Produktentwicklung für Flachstricktextilien“. Die Deutsche Bundesstiftung Umwelt (DBU) fördert das Vorhaben für zwei Jahre mit insgesamt rund 290.000 Euro, davon fließen 225.000 Euro an die HSNR.
 
Wo Textilabfall recycelt und damit in den Kreislauf zurückgeführt werden kann, muss auch weniger entsorgt werden. Werden Produktionsabfälle und -überhänge vernichtet, ist das nicht nur teuer für die Unternehmen. Für die Herstellung neuer Kleidung müssen auch wieder neue Fasern erzeugt werden. Je nach Faserstoff kommt es dabei zu großem Wasserverbrauch, starkem Pestizid- und Düngemitteleinsatz sowie langen Transportwegen mit hohen CO2-Emissionen.  
 
Die Projektpartner erarbeiten ein Konzept, mit dem gestrickte Produkte so entwickelt werden können, dass sie sich am Produktlebensende durch ein Faser-zu-Faser-Recycling zu hochwertigen Fasern neu aufbereiten lassen. Aus diesen Fasern kann anschließend neues, industriell verarbeitbares Garn für Bekleidung hergestellt werden, das im Idealfall später abermals recycelt werden kann.
 
Unter dem Motto „Design for Recycling“ analysieren die Partner, welche Faktoren und Verfahren am besten geeignet sind, Textilien schon bei ihrer Entstehung so zu planen, dass sie am Produktlebensende optimal recyclingfähig sind. Gleichzeitig dürfen sich Ästhetik, Qualität und Langlebigkeit der Produkte nicht verschlechtern. Die Frage ist also: Welche Parameter im mechanischen Recycling werden benötigt und welche Produkteigenschaften erzielen das beste kreislauffähige Ergebnis?
 
„KnitCycle“ konzentriert sich auf Pulloverwaren und Produkte, die auf Flachstrickmaschinen endformgerecht in Deutschland produziert werden. Dafür liefert und produziert die auf 3D-Strickwaren spezialisierte Firma Bache Innovative eigenes Abfall- und Forschungsmaterial.
 
Unterstützung mit Experten-Knowhow gibt es auch von TURNS Faserkreisläufe. Dieses Unternehmen stellt recycelte Garne aus verschiedenen gebrauchten, ausrangierten Alttextilien her.
 
Die Faser-zu-Faser-Recycling-Versuche finden am hochschuleigenen Forschungsinstitut für Textil und Bekleidung (FTB) statt. Dazu schafft die HSNR von dem Fördergeld eine Reißmaschine für das Textilrecycling an. Hiermit werden vor Ort die optimalen Prozessparameter für das Recycling der jeweiligen Produkttypen ermittelt. Die in diesem Prozess gewonnenen Reißfasern werden dann u.a. mit Unterstützung der Firma Textechno H. Stein GmbH & Co. KG aus Mönchengladbach analysiert und bewertet.

Mittels unterschiedlicher Aufbereitungs- und Spinnverfahren werden aus den Reißfasern anschließend neue Garne hergestellt. Die Forschenden testen, wie sich die Fasern wiederverspinnen lassen – auch in Kombination mit anderen Naturfasern, um mit möglichst hochwertigen neuen Produkten den Produktkreislauf zu schließen.

An Labor-Strickmaschinen erzeugt das FTB-Team erste 2D-Strickproben. Die finalen Strickprodukte aus den recycelten Garnen stellt der Kooperationspartner Bache Innovative her. 

Source:

Hochschule Niederrhein

adidas and Yohji Yamamoto: Second Y-3 Atelier Collection (c) adidas AG
18.03.2024

adidas and Yohji Yamamoto: Second Y-3 Atelier Collection

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

  • adidas and Yohji Yamamoto return to present their second Y-3 Atelier collection.

For its second collection, Y-3 Atelier introduces a suite of tailored pieces which blend adidas’ performance heritage with Yohji Yamamoto’s design vision. The collection takes original Yohji Yamamoto and Yohji Yamamoto POUR HOMME designs that are from the runway show and recreates them in fully seam sealed waterproof 3-layer GORE-TEX® material constructions, while maintaining the signature silhouette of the original designs. Featuring extended seams and flap pockets, the selection of monochromatic black vests, coats, parkas, blousons, jackets, and blazers comes replete with reflective logos.

Accompanying the launch of the collection is a series of still images captured by photographer Thue Nørgaard which convey the dynamism of each piece.

More information:
adidas Yohji Yamamoto Y-3
Source:

adidas AG

Collaboration between IHKIB and WRAP (c) IHKIB
18.03.2024

Collaboration between IHKIB and WRAP

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

Mr. Selcuk Mehmet Kaya, Chairman of the International Relations and Sustainability Committee of IHKIB, and Mr. Avedis Seferian, President and CEO of WRAP, officially inked a collaboration agreement on March 8, 2024, marking a significant step towards fostering business relations between Türkiye and the USA. The agreement focuses on a pilot project developed by IHKIB and WRAP, aiming to identify leading Turkish apparel companies exporting to the USA and encouraging these facilities to attain WRAP certification. In return, WRAP will provide in-person and virtual training at no charge to guide these facilities through the certification process. The project seeks to strengthen business ties between Türkiye and the USA, creating additional opportunities for mutual cooperation between the parties in both countries.

Source:

IHKIB - Istanbul Apparel Exporters’ Association

Active Apparel Group: Partnership with textile finishing brand FUZE Technologies (c) Active Apparel Group
15.03.2024

Active Apparel Group: Partnership with textile finishing brand FUZE Technologies

Active Apparel Group (AAG), manufacturer of performance apparel for the leisure/lifestyle and active market, announces the seventh anniversary of their partnership with the sustainable textile finishing brand FUZE Technologies.

AAG is the first apparel manufacturer to adopt FUZE’s permanent, chemical-free textile finish, and the only company in China able to apply FUZE in a closed-loop system. AAG leverages the platform to provide a range of performance characteristics to customers, including odor control, UV protection, moisture management, and cooling.

The FUZE finish utilizes gold and silver particles permanently bonded to a wide variety of natural and synthetic materials to achieve a range of performance characteristics. AAG customers employing the FUZE finish create apparel for the yoga, active lifestyle, workout, golf, and swimwear markets. 

Active Apparel Group (AAG), manufacturer of performance apparel for the leisure/lifestyle and active market, announces the seventh anniversary of their partnership with the sustainable textile finishing brand FUZE Technologies.

AAG is the first apparel manufacturer to adopt FUZE’s permanent, chemical-free textile finish, and the only company in China able to apply FUZE in a closed-loop system. AAG leverages the platform to provide a range of performance characteristics to customers, including odor control, UV protection, moisture management, and cooling.

The FUZE finish utilizes gold and silver particles permanently bonded to a wide variety of natural and synthetic materials to achieve a range of performance characteristics. AAG customers employing the FUZE finish create apparel for the yoga, active lifestyle, workout, golf, and swimwear markets. 

Source:

Active Apparel Group

adidas unveils kits for UEFA Euro 2024™ (c) adidas AG
15.03.2024

adidas unveils kits for UEFA Euro 2024™

Ahead of UEFA Euro 2024™, adidas unveils the latest series of technical performance kits for Belgium, Germany, Hungary, Italy, Scotland, Spain, and Wales.

Each of the jerseys are built to inspire a sense of pride and belonging, blending traditional elements with modern style to create something new for the next generation of players, including:

Ahead of UEFA Euro 2024™, adidas unveils the latest series of technical performance kits for Belgium, Germany, Hungary, Italy, Scotland, Spain, and Wales.

Each of the jerseys are built to inspire a sense of pride and belonging, blending traditional elements with modern style to create something new for the next generation of players, including:

  • Fresh application of national colours and exploration into new bolder hues – for example, the ‘Tricolore’ for Italy's home and away shirts, and a vibrant colour scheme for Germany’s away kit
  • Recoding traditional patterns and applying them in fresh ways. This includes a modern interpretation of tartan in the Scotland shirt, and patterns reflecting the carnation - the national flower – which adorn the base of Spain’s home and away kits 
  • Introducing fresh symbols to traditional federation wear, such as the Belgium away kit which celebrates the nation’s rich art and design culture, specifically cartoonist, Hergé, and the comic character he is famously known for; Tintin. Inspired by Tintin’s iconic outfit, a royal nod is found on the back of the collar with a golden crown that glimmers against a bright blue backdrop  
  • Across the collection, a blend of dynamic shapes and colours express the jubilation and hope that fans and players share ahead of, and during, a major tournament

Each jersey includes either HEAT.RDY technology, optimized to keep players feeling comfortable, or AEROREADY technology, sweat-wicking or absorbent materials that keep players feeling dry. Lighter crests and additional mesh panels are also applied, helping improve airflow and comfort, to help players focus on the game at hand.

The adidas Euros kit collection will be available from from March 14, 2024.

More information:
adidas adidas AG Sportswear
Source:

adidas AG

(c) Luca Faloni
15.03.2024

Barabino & Partners wird Kommunikationsberater für Luca Faloni

Luca Faloni, eine italienische Marke für Herrenmode, ernennt Barabino & Partners zu ihrem Kommunikationsberater für den deutschen und US-amerikanischen Markt. Barabino & Partners, ein führendes PR-Unternehmen in Italien, hat sich zum Ziel gesetzt, die Präsenz der Marke zu stärken und die Kunstfertigkeit sowie den Handwerksansatz von Luca Faloni durch seine Büros in Berlin, München und New York international zu fördern.

Das 2014 gegründete Unternehmen Luca Faloni produziert hochwertige und luxuriöse Herrenmode. Die Marke bezieht natürliche Materialien wie Leinen, Kaschmir, Baumwolle und Leder von regional ansässigen Handwerkern in Italien.

Luca Faloni, eine italienische Marke für Herrenmode, ernennt Barabino & Partners zu ihrem Kommunikationsberater für den deutschen und US-amerikanischen Markt. Barabino & Partners, ein führendes PR-Unternehmen in Italien, hat sich zum Ziel gesetzt, die Präsenz der Marke zu stärken und die Kunstfertigkeit sowie den Handwerksansatz von Luca Faloni durch seine Büros in Berlin, München und New York international zu fördern.

Das 2014 gegründete Unternehmen Luca Faloni produziert hochwertige und luxuriöse Herrenmode. Die Marke bezieht natürliche Materialien wie Leinen, Kaschmir, Baumwolle und Leder von regional ansässigen Handwerkern in Italien.

Source:

Barabino & P. Deutschland GmbH

(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

PrimaLoft erweitert Daunenalternativen-Sortiment (c) PrimaLoft
11.03.2024

PrimaLoft erweitert Daunenalternativen-Sortiment

PrimaLoft, Inc. hat sein Portfolio an synthetischen Daunenalternativen um zwei neue Hochleistungsisolationen erweitert: PrimaLoft® Insulation ThermoPlume®+ und PrimaLoft® Insulation RISE Loose Fill.

ThermoPlume®+
PrimaLoft® ThermoPlume®+ ist eine synthetische Daunenalternative, die entwickelt wurde, um die Wärme, Bauschkraft, Weichheit und Kompressibilität von Daunen zu imitieren. Die Innovation kombiniert zwei einzigartige Faserformen, um den "Loft" und die Wärmeeigenschaften zu erhöhen. ThermoPlume®+ benötigt - verglichen mit der beliebten ThermoPlume® Technologie - ca. 20 % weniger Material, um dieselbe Bauschkraft zu erzeugen.

PrimaLoft, Inc. hat sein Portfolio an synthetischen Daunenalternativen um zwei neue Hochleistungsisolationen erweitert: PrimaLoft® Insulation ThermoPlume®+ und PrimaLoft® Insulation RISE Loose Fill.

ThermoPlume®+
PrimaLoft® ThermoPlume®+ ist eine synthetische Daunenalternative, die entwickelt wurde, um die Wärme, Bauschkraft, Weichheit und Kompressibilität von Daunen zu imitieren. Die Innovation kombiniert zwei einzigartige Faserformen, um den "Loft" und die Wärmeeigenschaften zu erhöhen. ThermoPlume®+ benötigt - verglichen mit der beliebten ThermoPlume® Technologie - ca. 20 % weniger Material, um dieselbe Bauschkraft zu erzeugen.

ThermoPlume®+ kombiniert die bestehende segelförmige Faserstruktur von ThermoPlume mit kugelförmigen Faserkugeln, um ein einheitliches strukturelles Netzwerk zu schaffen. Die Hohlräume zwischen den verschiedenen Formen erzeugen eine Art Gerüsteffekt, der das Gesamtvolumen erhöht, und so eine daunenähnliche Wärme bietet. Die langlebige Struktur hält mehrmaligen Wäschen und Abnutzung stand und trocknet schnell, was eine einfache Pflege ermöglicht, und fühlt sich gleichzeitig besonders weich an. PrimaLoft® ThermoPlume®+ Synthetikfasern  bieten eine Fluorcarbon-freie Wasserbeständigkeit und halten den Nutzer auch bei Nässe warm. Die Isolation besteht zu 100 % aus recyceltem Material.

PrimaLoft® RISE Loose Fill
Die PrimaLoft® RISE-Technologie wurde erstmals im Jahr 2020 eingeführt und erfreut sich aufgrund ihres Mix aus leichter Wärme und dauerhafter Druckfestigkeit in verschiedenen Stärken großer Beliebtheit. Mit RISE Loose Fill hat PrimaLoft diese Faserkonstruktion genutzt, um ein leistungsfähiges loses Produkt zu entwickeln. RISE Loose Fill wird zu 100 % aus recyceltem Material hergestellt und bietet eine Füllkraft von 650 Cuin für ein Höchstmaß an Stil, Wärme und Komfort.

Outdoor & Sport Marken wie adidas TERREX, Rab und Nike sind einige der ersten, die die neuen Innovationen in ihre Kollektionen für die Herbst/Winter Saison 2024 aufnehmen.

(c) LFDY
11.03.2024

LFDY x edding: Kooperation zur neuen Kollektion

Als Hommage an die frühe Graffiti-Kultur präsentiert das Streetwear Label Live Fast Die Young zu ihrer Frühjahrskollektion zwei limitierte Live Fast edding-Marker. Neben dem neuen Kollektions-Drop „Hit And Run“, bestehend aus rund 50 Teilen, sind die zwei Live Fast edding-Marker in Schwarz und Silber erhältlich.

Street Style, Hip-Hop, Graffiti-Kunst – in den 80er und 90er Jahren werden diese urbanen Strömungen zum Sinnbild einer ganzen Generation. Selbst aus dieser Kultur erwachsen, würdigt LFDY mit „Hit And Run” vor allem die Anfänge der New Yorker Graffiti-Szene und ihre Legenden wie Cope2, einen der Pioniere des Throw-up-Stils. In Oversized Looks und mit Graffiti Prints spielt die Brand mit Motiven der Szene, wie dem Nothammer (Emergency Hammer) und Überwachungskameras (Surveillance Cameras) sowie dem unverzichtbaren Accessoire jedes Graffiti Artists: dem edding-Marker. Der Permanentmarker wurde gerade in den ersten Jahrzehnten zu einer Ikone der Graffiti-Szene. Für die neue LFDY Spring Collection brachte Phillip Böndel von The Ambition das deutsche Traditionsunternehmen und die Streetwear Brand zusammen.

Als Hommage an die frühe Graffiti-Kultur präsentiert das Streetwear Label Live Fast Die Young zu ihrer Frühjahrskollektion zwei limitierte Live Fast edding-Marker. Neben dem neuen Kollektions-Drop „Hit And Run“, bestehend aus rund 50 Teilen, sind die zwei Live Fast edding-Marker in Schwarz und Silber erhältlich.

Street Style, Hip-Hop, Graffiti-Kunst – in den 80er und 90er Jahren werden diese urbanen Strömungen zum Sinnbild einer ganzen Generation. Selbst aus dieser Kultur erwachsen, würdigt LFDY mit „Hit And Run” vor allem die Anfänge der New Yorker Graffiti-Szene und ihre Legenden wie Cope2, einen der Pioniere des Throw-up-Stils. In Oversized Looks und mit Graffiti Prints spielt die Brand mit Motiven der Szene, wie dem Nothammer (Emergency Hammer) und Überwachungskameras (Surveillance Cameras) sowie dem unverzichtbaren Accessoire jedes Graffiti Artists: dem edding-Marker. Der Permanentmarker wurde gerade in den ersten Jahrzehnten zu einer Ikone der Graffiti-Szene. Für die neue LFDY Spring Collection brachte Phillip Böndel von The Ambition das deutsche Traditionsunternehmen und die Streetwear Brand zusammen.

Die ausgewählten Artikel der Zusammenarbeit, der edding 3000 in Schwarz und der edding 750 in Silber, spiegeln die typischen Schwarz- und Chromfarben der Graffiti- und Brand-DNA von LFDY wider.

Source:

Live Fast Die Young

adidas: Y-3 and Real Madrid launch Travel Collection (c) adidas AG
08.03.2024

adidas: Y-3 and Real Madrid launch Travel Collection

Having recently celebrated the club’s 120th anniversary with a special kit for the 2021/2022 season, this year, Y-3 and Real Madrid have come together once again to bring Yohji Yamamoto’s perspective to the club with a seven-piece travel collection.

Inspired by the signature monochromatic color palette of both Real Madrid and Y-3, the travel collection itself consists of a sleek and elegant selection of pieces in all black. Crafted at the intersection of tailoring and athletic-wear, the suite of pieces includes a short sleeve polo, a long sleeve polo, a pair of shorts, a pair of track pants, a track top, a coach jacket, and a premium faux leather jacket – each made with soft sporting fabrics and finished with collaborative details such as Yohji Yamamoto’s recognizable handwritten signature script wordmark and the Real Madrid crest.

Accompanying the launch of the travel collection is a campaign shot by trailblazing London-based photographer Gabriel Moses featuring past and present Real Madrid icons including Naomie Feller, Jude Bellingham, David Alaba, Misa Rodríguez, and Zinedine Zidane.

Having recently celebrated the club’s 120th anniversary with a special kit for the 2021/2022 season, this year, Y-3 and Real Madrid have come together once again to bring Yohji Yamamoto’s perspective to the club with a seven-piece travel collection.

Inspired by the signature monochromatic color palette of both Real Madrid and Y-3, the travel collection itself consists of a sleek and elegant selection of pieces in all black. Crafted at the intersection of tailoring and athletic-wear, the suite of pieces includes a short sleeve polo, a long sleeve polo, a pair of shorts, a pair of track pants, a track top, a coach jacket, and a premium faux leather jacket – each made with soft sporting fabrics and finished with collaborative details such as Yohji Yamamoto’s recognizable handwritten signature script wordmark and the Real Madrid crest.

Accompanying the launch of the travel collection is a campaign shot by trailblazing London-based photographer Gabriel Moses featuring past and present Real Madrid icons including Naomie Feller, Jude Bellingham, David Alaba, Misa Rodríguez, and Zinedine Zidane.

More information:
adidas Y-3
Source:

adidas AG

08.03.2024

Archroma: New wet-fastness improver

Archroma has developed a new wet-fastness improver that helps brands and mills produce durable clothing, towels, linens and other textile products with long-lasting colors without compromising on quality or introducing hazardous chemicals.

ALBAFIX® ECO PLUS is a next-generation fixing agent that delivers a strong wet-fastness for all reactive dyes on cotton and other cellulosic fibers and polyester-cotton blends. It will not change the shade of the dyed fabric or negatively impact light-fastness. The product also avoids production challenges – such as foaming, acid hydrolysis and migration problems during drying – to promote efficiency and quality output.

ALBAFIX® ECO PLUS is suitable for jet applications, and for other dyeing and washing equipment with vigorous liquor circulation, and can also be applied by exhaustion, by padding or from the last bath of the soaping process after dyeing or printing.

Archroma has developed a new wet-fastness improver that helps brands and mills produce durable clothing, towels, linens and other textile products with long-lasting colors without compromising on quality or introducing hazardous chemicals.

ALBAFIX® ECO PLUS is a next-generation fixing agent that delivers a strong wet-fastness for all reactive dyes on cotton and other cellulosic fibers and polyester-cotton blends. It will not change the shade of the dyed fabric or negatively impact light-fastness. The product also avoids production challenges – such as foaming, acid hydrolysis and migration problems during drying – to promote efficiency and quality output.

ALBAFIX® ECO PLUS is suitable for jet applications, and for other dyeing and washing equipment with vigorous liquor circulation, and can also be applied by exhaustion, by padding or from the last bath of the soaping process after dyeing or printing.

Like ALBAFIX® ECO, the latest addition to the ALBAFIX® family has a positive influence on chlorine-fastness. When applied with double fixing, it achieves the same high performance on polyamide and PA/Elastane fabrics, as it does on cellulosic fibers. This makes it ideal for the production of swimwear, as well as sportswear and outdoor clothing.

ALBAFIX® ECO PLUS complies with global eco-standards and initiatives, including Global Organic Textile Standard (GOTS), bluesign® and the Zero Discharge of Hazardous Chemicals (ZDHC) Roadmap.

Source:

Archroma

06.03.2024

Browzwear adds complete Color Atlas by Archroma® library

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

More information:
Archroma Browzwear Color Atlas
Source:

Archroma