From the Sector

Reset
19 results
(c) GFA and PDS Ventures
13.03.2024

GFA and PDS Ventures: Funding programme for fashion innovation

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Source:

Global Fashion Agenda

20.02.2024

Texworld Apparel Sourcing Paris

Nearly 8,000 international visitors came to meet the 1,300 exhibitors at Texworld Apparel Sourcing Paris. This year's event was enhanced by a boldly designed showcase in the heart of Paris.
The offer was broader, more diversified and more accessible. Despite increasing requirements in the industry, visitor numbers remained stable. It was on these two objective notes that the latest edition of the Texworld and Apparel Sourcing Paris trade shows for the fashion industry came to a close, held from 5 to 7 February 2024 at the Paris Expo Porte de Versailles. During these 3 days, nearly 8,000 visitors came to meet 1,300 weaving and clothing companies from 25 countries on the two levels of Hall 7 (7.2 and 7.3).

Nearly 8,000 international visitors came to meet the 1,300 exhibitors at Texworld Apparel Sourcing Paris. This year's event was enhanced by a boldly designed showcase in the heart of Paris.
The offer was broader, more diversified and more accessible. Despite increasing requirements in the industry, visitor numbers remained stable. It was on these two objective notes that the latest edition of the Texworld and Apparel Sourcing Paris trade shows for the fashion industry came to a close, held from 5 to 7 February 2024 at the Paris Expo Porte de Versailles. During these 3 days, nearly 8,000 visitors came to meet 1,300 weaving and clothing companies from 25 countries on the two levels of Hall 7 (7.2 and 7.3).

Visitors: a Euro-Mediterranean Top 5
This unprecedented concentration of international companies in Europe, which exceeds in number that of February 2019, is a reminder of the central role of European markets for the global fashion industry. This position is confirmed by the weight of buyers from the Euromed zone in the visitor structure: Top 5 is concentrated around buyers from France (20% of the total, up sharply on 2023), the UK (8.3%), Italy (7.9%), Turkey (7.2%) and Spain (6.8%). This Parisian event is proving to be an essential point of contact between designers, buyers and suppliers of fabrics or finished products.

Making the offer ever more accessible “Despite the slowdown in the clothing market, Europe remains a major market for textile and finished goods manufacturers" explains Frédéric Bougeard, President of Messe Frankfurt France. “For some players, it is becoming a strategic market to offset the uncertainties weighing on the Russian and American markets" he continues. Our mission is to fulfill our role as a market place, to adapt to these changes and to make the international offer more and more accessible." The February event also highlighted near sourcing. Nine Ukrainian companies grouped together under the banner of the Ukrainian Association of Textile and Leather Industry Companies (Ukrlegprom), as well as Bulgarian, Italian and Dutch companies, were able to take advantage of the show's visibility to include their expertise in the sourcing plans of French and European buyers.

Texworld Apparel Sourcing Paris, a new name for our trade fairs
Reflecting the adaptation of Messe Frankfurt France's strategy to changes in the market, Texworld Evolution Paris is changing its name to Texworld Apparel Sourcing Paris. This move reflects developments in fashion sourcing and the expansion of brand universes. A growing number of buyers now want to be able to select materials, while also sourcing finished products directly to complement collections or expand their range. The new name is accompanied by a new dual baseline - Weaving the future; sourcing I business I solutions - to underline these developments and reinforce the fairs' service-led positioning.

From 1 to 3 July 2024 at Porte de Versailles
This new signature will be fully expressed at the next edition of Texworld Apparel Sourcing Paris, including Avantex and Leatherworld, which will take place from 1 to 3 July 2024 in Hall 7 (7.2 and 7.3) of the Paris Expo Porte de Versailles. The show, which will remain the same size and offer a more selective range of products, will reflect this convergence between textiles and finished products. This session will also have no interaction with the Paris 2024 Olympic Games, which are due to open on 26 July, three weeks after Texworld Apparel Sourcing Paris

Source:

Messe Frankfurt

06.10.2023

Fashion experts at Global Fashion Summit in Boston

Hosted in Boston, Massachusetts on 27 September, Global Fashion Summit convened hundreds of esteemed representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, and marked the first edition of Global Fashion Summit in North America since the forum’s launch in 2009 as a side-event to COP15 in Copenhagen.
 
The Boston edition further explored Global Fashion Agenda’s 2023 editorial theme, ‘Ambition to Action’, while reflecting on and responding to what happened at Global Fashion Summit: Copenhagen Edition in June. By bringing Global Fashion Summit to Boston – a renowned hub for technology, innovation, and education - the Summit presented a deeper exploration of the global challenges, differences, and opportunities towards a more sustainable value chain. The Innovation Forum is a key pillar of GFA’s work, making Boston an apt location to showcase pioneering industry solution providers.
 

Hosted in Boston, Massachusetts on 27 September, Global Fashion Summit convened hundreds of esteemed representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, and marked the first edition of Global Fashion Summit in North America since the forum’s launch in 2009 as a side-event to COP15 in Copenhagen.
 
The Boston edition further explored Global Fashion Agenda’s 2023 editorial theme, ‘Ambition to Action’, while reflecting on and responding to what happened at Global Fashion Summit: Copenhagen Edition in June. By bringing Global Fashion Summit to Boston – a renowned hub for technology, innovation, and education - the Summit presented a deeper exploration of the global challenges, differences, and opportunities towards a more sustainable value chain. The Innovation Forum is a key pillar of GFA’s work, making Boston an apt location to showcase pioneering industry solution providers.
 
Attendees heard from over 40 speakers from a range of companies and organisations such as Levi Strauss & Co., Tapestry, Neiman Marcus Group, Thunder Voice Hat, H&M Group, Alice and Olivia, BBC StoryWorks, New Standard Institute, Conservation International, Worldly, Trove, Ceres, Aditya Birla Fashion and Retail Ltd, and many more. This Summit also featured esteemed Indigenous speakers on the programme. View all speakers.
 
The Summit’s second international edition facilitated inspiring thought leadership and exchanges around key themes including: Policy, Finance, and Retail, while also complementing the core priorities of the Fashion CEO Agenda: Respectful and Secure Work Environments, Better Wage Systems, Resource Stewardship, Smart Material Choices, and Circular Systems. The programme featured bold panels, case studies, and leadership roundtables reflecting on topics including: ‘Indigenous Leadership Perspectives’, ‘Exploring Fashion’s ESG Concept’, ‘On The Ground: Adaptation or Mitigation?’, ‘The Global Approach to Circularity’, and ‘Innovation for Value Chain Challenges’.

Global Fashion Summit: Boston Edition also presented an Innovation Forum, enabling small and large companies to meet with 14 sustainable solution providers from across the value chain– equipping them with the concrete tools to expedite meaningful actions. GFS Connect facilitated over 90 connections between fashion companies and exhibitors during the Summit.

Source:

Global Fashion Agenda

23.03.2023

Haelixa added to the Denim Deal

The steering committee for the Denim Deal has announced that Haelixa, the Swiss standard in physical traceability, is approved as a new signature. The Denim Deal is an international collaboration of more than 50 private and public sector companies united in the commitment to produce denim more circularly.

The Denim Deal aims to close the loop and achieve change in the value chain. Based in Amsterdam, the group is working towards a circular economy where textile waste no longer exists. The brand and manufacturing members pledge to work towards using 5% recycled post-consumer cotton in all future denim collections and produce 3 million denim jeans made with 20% recycled post-consumer cotton.

The steering committee for the Denim Deal has announced that Haelixa, the Swiss standard in physical traceability, is approved as a new signature. The Denim Deal is an international collaboration of more than 50 private and public sector companies united in the commitment to produce denim more circularly.

The Denim Deal aims to close the loop and achieve change in the value chain. Based in Amsterdam, the group is working towards a circular economy where textile waste no longer exists. The brand and manufacturing members pledge to work towards using 5% recycled post-consumer cotton in all future denim collections and produce 3 million denim jeans made with 20% recycled post-consumer cotton.

Coordination of the Denim Deal is led by Roosmarie Ruigrok, where the objective is to unite potential allies who have made the journey to circularity a priority. She has been working to improve sustainability in textiles for more than two decades and is an expert on enrolling the correct stakeholders to instigate change. Ruigrok states, "a circular supply chain in the textile industry is like a well-prepared machine - it ensures that every part of the production process runs smoothly, from sourcing post-consumer materials to delivering well-made finished products to customers. It not only drives efficiency and profitability but also builds trust among stakeholders and fosters sustainable practices - we welcome Haelixa who offers a trustful traceability solution."

Over the last few years, the demand for the technology in recycled denim has grown as brands are asked to validate their recycling claims. Haelixa’s unique DNA solution marks and traces fibers from the source to retail. Using DNA to mark the recycled post-consumer cotton, Haelixa substantiates claims by testing the final garment to validate that the marked waste is present.

The Denim Deal is pushing to lead the change in how denim is made. Changing the standards of operation is always challenging, and traceability is a key to authenticating recycled claims. “We are committed to promoting the use of recycled fibers through traceability and thrilled to align with this group,” said Holly Berger, Haelixa’s Marketing Director. “The goals of the Denim Deal support our vision for a circular economy.”

Source:

Haelixa AG

15.08.2022

THE ITALIAN LUSTER at Munich Fabric Start

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

"THE ITALIAN LUSTER" will allow all visitors an incredible journey into the Italian supply chain that has the ability to meet any demand of brands, from small to large production needs.

On the top floor of the Catalyzer Hall, it will be possible to view the individual collections of the companies in attendance and receive a beautiful gift specially created by the CADICA GROUP company from Carpi.

 
Participants
ACM - TRIMS AND ACCESSORIES PRODUCER
ACM was founded in 1982.
Since 1982, ACM has been providing the fashion world with unique, sought-after and customized details, guaranteeing prestigious and innovative workmanship. Each and every product is the result of the care we take at every stage of our production process: from the prototype, designed by putting the consumer's health first, to production with state-of-the-art machinery, which allows for fine workmanship and cutting-edge customization, while minimizing the impact on the environment (we are GRS certified) and complying with the strictest eco-toxicological regulations.

FASHION ART - LUXURY FASHION DESIGN
Fashionart is the brainchild of Andrea Rambaldi, who, after learning his trade from his parents, his mother a seamstress and his father the owner of a dye shop, decided to pursue a freelance career.
He began by collaborating with companies in the textile sector, where he deepened his knowledge in the field of chemistry and industrial processes, touching on the problems of processing cycles.
The real turning point came as a result of an important job for the Maison Chanel, which recognized the originality and effectiveness of his technical proposals. From that moment, this is 2008, FashionArt was born, a company focused on luxury fashion and design, expert in the design and production of garments.
From the idea to the final product, the company is able to support the client throughout the entire production process.
Since then, the company has grown and developed exponentially thanks to a team of managers, artists and experts whose experience makes them a benchmark in the high fashion industry. Fashionart operates exclusively in high fashion, a very difficult field in which to combine experience and technique with art and creativity, where our potential can be expressed to the fullest.

ELLETI - GARMENTS AND WASHING MAKER
Advocate of an approach that combines tradition, creativity, and innovation, for over 30 years Elleti Group has defined standards of absolute excellence for the denim industry. Born in the 80s in San Bonifacio, near Verona, the company developed in a one-of-a-kind context, a hotbed of ideas that led to the defining and establishing of new professions and skills in the field of denim treatment and garment personalization. Led by Luigi Lovato, right from the start the company established itself on the denim scene thanks to an ambitious and pioneering investment in new solutions. The following ten years mark an important growth which leads to the internationalization both of brand and production. After the implementing of a new department for garment dyeing, Elleti Group was ready to welcome the ever-increasing international demand, equipping itself with the first laundry in Tunisia, a country logistically central in the Mediterranean area, and as a result, ideal for the development of a complete textile supply chain. This successful story continues to unfold in the 2000s, a decade that marks the opening to the market of garment making thanks to two new structures in Romania, and peaks with the acquisition of Martelli Lavorazioni Tessili. Today Elleti Group stands firm in the market as a result of a complete offer that preserves the company’s artisanal vocation enriched through a constant process of responsible innovation.

In addition, companies BERTO INDUSTRIA TESSILE and OLIMPIAS GROUP will participate in the project by presenting their collections within their booths in the Catalyzer hall.

Source:

EFFE-BI SRL PR & COMMUNICATION

(c) riri Group
22.12.2021

DMC joins Riri Group

The year 2021 is expected to end on an extremely positive note for the Swiss Group, with an organic turnover record (significantly higher than pre-pandemic levels) and an acceleration of the product range completion strategy: after the addition of Amom, in June, Riri is proud to share the closing of the acquisition and integration into the Group of DMC, a company specialized in the metal components sector for haute couture, more specifically leatherwear. This is another step towards creating a single hub dedicated to luxury accessories, whose goal is to develop a balanced portfolio including zips, buttons, metal hardware, and fashion jewels.

DMC, established in 1976 in Scarperia e San Piero a Sieve, near Florence, has a consolidated experience with major luxury brands and a strategic position, being located close to the Tuscan leatherwear district. Originally a family-run business, today it is a company which combines highly skilled Italian artisan tradition, which has a strong connection in the region, with the use of cutting-edge technologies. Its comprehensive vertical integration system allows for in-house management of all production process phases.

The year 2021 is expected to end on an extremely positive note for the Swiss Group, with an organic turnover record (significantly higher than pre-pandemic levels) and an acceleration of the product range completion strategy: after the addition of Amom, in June, Riri is proud to share the closing of the acquisition and integration into the Group of DMC, a company specialized in the metal components sector for haute couture, more specifically leatherwear. This is another step towards creating a single hub dedicated to luxury accessories, whose goal is to develop a balanced portfolio including zips, buttons, metal hardware, and fashion jewels.

DMC, established in 1976 in Scarperia e San Piero a Sieve, near Florence, has a consolidated experience with major luxury brands and a strategic position, being located close to the Tuscan leatherwear district. Originally a family-run business, today it is a company which combines highly skilled Italian artisan tradition, which has a strong connection in the region, with the use of cutting-edge technologies. Its comprehensive vertical integration system allows for in-house management of all production process phases.

“The addition of DMC to the family” – explains Renato Usoni, CEO of the Riri Group – “is not just a bonus for our offer in terms of product range. It means also a fundamental milestone in the creation strategy of a fully integrated business model”. As a matter of fact, the operation is a further improvement in the Group’s designing potential, increasingly able to provide tailor-made accessories, as requested by each client, achieving very high levels of customization while keeping up massive investments in new technologies, organization systems and sustainability projects with a cross-cutting impact.

“Our Group” – Usoni adds – “is, to all intents and purposes, a leader in terms of innovation, thanks to its state-of-the-art plants, which are located in seven production factories, and thanks to its constant search on emerging technologies and materials”. More specifically, DMC’s proposal – in line with Riri’s – is increasingly focused on the use of sustainable products and on processes with a low environmental impact.

Furthermore, the new company in the Group is committed to integrating the economic development of its business with the ensuing social accountability. Evidence of this attention is shown by its having been awarded the certifications ISO 9001, due to the quality of its processes, products and services, and SA 8000, for its ethical management of human resource. Moreover, every year DMC produces a social report which, in line with what have always been distinctive values of Riri, bears witness to its intent of communicating its achievements clearly and transparently.

More information:
Riri Group
Source:

riri Group

RGE Gives Sustainable Fashion a Boost with New Partnerships in Singapore (c) RGE Group
From Left to Right: Tey Wei Lin, President of RGE, Sim Ann, Senior Minister of State for Foreign Affairs and National Development, Low Yen Ling, Minister of State for Trade & Industry and Culture, Community and Youth, and Wilson Teo, President of TaFF after signing of strategic partnership between TaFF and RGE to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education
01.12.2021

RGE Gives Sustainable Fashion a Boost

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

Wilson Teo, President of TaFF, said, “Our strategic partnership with RGE marks a step forward for TaFF to expand our sustainability ecosystem throughout the fashion value chain, from materials, manufacturing, brands and technology to solutions. We have set up a Steering Committee that spans across the value chain, as a model for the industry. Together with our collaborators, we will continue to equip enterprises in the journey of sustainability. We will also work with communities to build awareness in responsible consumption and recycling.”

RGE has committed to provide nearly S$3 million funding over three years to support TaFF’s fashion sustainability programme. In addition, RGE’s Vice Chairman Bey Soo Khiang joins the programme’s Steering Committee as its Vice Chairperson.

Tey Wei Lin, President of RGE, said, “As a Singapore-based company and the world’s largest viscose producer, our business is well-positioned to support the country’s desire to advance sustainable development and to create a green economy. Our collaboration with TaFF and NTU is an investment of financial and other resources to create meaningful impact, not just within Singapore but also in the region. As part of our US$200 million investment commitment into next-generation textile fibre innovation and technology, we seek to work with innovators, industry partners, research institutions and academia to scale up solutions that will deliver cleaner and more circular cellulosic textile fibre to the masses at affordable prices.”

The launch of TaFF’s fashion sustainability programme follows the roll-out of the Enterprise Sustainability Programme (ESP) by Enterprise Singapore on 1 October 2021, which supports enterprises in their sustainability initiatives and helps them capture new opportunities in the green economy.

“Industry partnerships are pertinent to uplift capabilities of enterprises. We are very encouraged by TaFF’s efforts to drive sustainability in the textile and fashion sector as trade associations and chambers play a key role in strengthening sector-specific capabilities,” said Alan Yeo, Director of Retail & Design at Enterprise Singapore. “Collaborations with corporate partners such as RGE will also help accelerate this process. This is a good start and we hope to eventually see more companies across all sectors start to integrate sustainability alongside their growth.”

The launch event was graced by Minister of State for Trade and Industry Low Yen Ling, TaFF’s patron and Senior Minister of State for National Development and Foreign Affairs Sim Ann, CEO of Enterprise Singapore Png Cheong Boon, as well senior representatives from TaFF and RGE.

The official launch of the research collaboration with NTU is expected to take place next year. A key desired outcome from the collaboration is to complement RGE’s pilot urban-fit textile recycling plant in Singapore.

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

(c) Riri Group
Stones & Gold
01.09.2021

Riri Group’s FW 2022-23 collection: Creativity, innovation, sustainability

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

The Swiss group presents three creative inspirations to explore new shapes, colors, materials and define a new offer featuring a variety of solutions and ideas.
A tribute to health and to balance with nature, to the advanced goldsmith craftsmanship and to the effortless sophistication of industrial luxury: the FW 2022-23 collection by Riri Group is a true kaleidoscope of shapes, colors and materials, where three different creative inspirations meet – Biophilic, Stones&Gold and Industrial Luxe – for a high-end line of accessories.

All three paths are the result of state-of-the-art techniques, of an R&D effort and of the renowned expertise of the Swiss group. Part of the offer is also a selection of pieces by Cobrax Metal Hub, among which stand out buckles and locks with peculiar shapes and finishing.

Looking to the new season with a positive and enthusiastic attitude, the Group continues to work towards an increasing sustainability when it comes to products and processes. The collection, in fact, is a further step toward Riri’s path of green responsibility that the company has taken to bring actual improvement in its sustainable performance. This year, Riri Group published its first Sustainability Report, calculated in compliance with Global Reporting Initiative Standard (GRI), and adopted recycled polyester as production standard for zips’ tapes.

Biophilic
A way to honor love for life, this line emphasizes the importance of physical and mental wellbeing, answering the questions raised during the challenges faced in the last year. Balance with nature becomes a concrete product circularity operation resorting to manufacturing processes with a low environmental impact and to organic and biodegradable materials. Among them stands out recycled polyester for zips which is Global Recycled Standard (GRS) certified, Global Organic Textile Standard certified organic cotton and other alternative fibers, such as nettle, a natural resource that is a great alternative to synthetic fibers. Rivets, zips, buttons and metal components are made of stainless steel, which guarantees durability and resistance, 100% recycled copper and aluminum – light, ductile and resistant to oxidation. Among the most interesting solutions are rice peel powder – used on buttons’ overseals – and eco-sustainable thermoplastic polyurethane, obtained from renewable raw sources.

Stones & Gold
Sophistication and advanced craftsmanship mark the pieces of this creative path which, inspired by goldsmith and glyptic craft tradition, reveals a delicate sense of positivity and richness. Gems, lapis lazuli, marble, and mother-of-pearl are protagonists of a refined selection of accessories designed to amaze and catch the eye, resembling actual jewels. Essential the use of gold, especially in its liquid form: dominating zips and buttons’ finishes, this precious and versatile metal becomes a decorative feature on printed tape.

Industrial luxe
The third proposal embodies the unique style and timeless elegance that have always defined Riri’s products, embellishing them with new engineering details which makes them very relevant. The accessories come with golden and black finishes, both glossy and matt, and explore shapes developed to bring life to a range of luxury accessories with a sophisticated industrial aesthetics. A dominating role goes to stainless steel, along with a selection of impactful and elegant tapes which includes jacquard options, for a retro-futuristic look that is revealed also through the use of mechanical elements, such as screws and etched metal sheets, and in the clean and boxy shapes of pullers and buttons.

Source:

Menabò Group for Riri Group

Checkpoint Systems: Research Report „Utilising RFID in Retailing: Insights on Innovation“ (c) Checkpoint Systems GmbH
25.06.2021

Checkpoint Systems: Research Report „Utilising RFID in Retailing: Insights on Innovation“

A research report released today has revealed the innovative new ways retailers are using RFID technology in-store to improve profitability. Authored by Emeritus Professor Adrian Beck from the University of Leicester and the ECR Retail Loss Group and supported by Checkpoint Systems, Utilising RFID in Retailing: Insights on Innovationhighlights how companies are employing the technology for a broader range of purposes. It demonstrates the value the technology is bringing to their businesses and ultimately, the impact it is delivering to their bottom line. Crucially, it also shows thatmore retailers than ever are recognizing the benefits of RFID and driving uptake within their organisations. The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

A research report released today has revealed the innovative new ways retailers are using RFID technology in-store to improve profitability. Authored by Emeritus Professor Adrian Beck from the University of Leicester and the ECR Retail Loss Group and supported by Checkpoint Systems, Utilising RFID in Retailing: Insights on Innovationhighlights how companies are employing the technology for a broader range of purposes. It demonstrates the value the technology is bringing to their businesses and ultimately, the impact it is delivering to their bottom line. Crucially, it also shows thatmore retailers than ever are recognizing the benefits of RFID and driving uptake within their organisations. The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

The report claims that as businesses are becoming more established in their use of RFID-generated data, they are gradually incorporating more usecases into their business-as-usual practices.

In particular, more and more retailers reported using RFID to streamline the audit process (as an alternative to infrequent organisational stock takes), which not only delivers considerable cost savings, but also provides more regular insights into the status of inventories. It also found that using RFID was having a significant impact on store processes. While RFID has always been key to inventory accuracy, some companies are now using this data to further improve business activities such as reducing phantom out of stocks, improving rapid stock search and find tasks and developing an efficient ship from store (SFS) capability.

Beyond the more traditional retail model, RFID was seen as a key facilitator in delivering omnichannel retailing by all those questioned. Without the inventory accuracy offered by RFID, few retailers believed they could reliably use their stores as fulfilment centres to output online orders. Indeed, one retailer admitted to only making RFID-enabled store stock available for this purpose. The use of RFID to improve online order accuracy is also becoming more commonplace, to reduce errors in the picking and packing process, therefore improving customer satisfaction. One retailer reported a 90% reduction in incorrect orders and customer complaints since introducing RFID into the process.

Looking to the future, one area where the benefits of RFID are starting to be tested is self-checkouts (SCO). While currently limited due to the need to have a 100% SKU tagging strategy in place, retailers are starting to recognize the benefits the technology could offer including increased speed of checkout, reduced likelihood of double scanning and thereby improved customer service. Another area where retailers also reported reaping the benefits of RFID was loss prevention. While none of those interviewed argued that reducing loss was the primary reason for investing in RFID, many acknowledged they were benefiting from it by using the technology to tackle refund frauds, enable dynamic loss product profiling, manage e-frauds and identify stolen products.

Source:

Checkpoint Systems GmbH / Carta GmbH

Riri’s SS 2022 collection explores the mind of the future. (c) Riri
Rejoyce RIRI ECO 2021 NEW COLLECTION
28.04.2021

Riri: Post-pandemic emotions

  • Riri’s SS 2022 collection explores the mind of the future.
  • Bright colors, vintage themes as well as timeless designs and attention to detail, combined with concepts that highlight history and processes.

Riri Group’s gaze looks to the future once more, offering a line of accessories where creativity meets cutting-edge technology. This is the scenario spawning the new SS 2022 collection; a range of innovative proposals each representing a different emotional response to the pandemic, an attempt to interpret the emotions, needs and desires of consumers in the coming years.

The Italian-Swiss group, that for almost a century has committed to creating zips and buttons for the world’s most important fashion brands, doubles down on its forward-looking vision. The result is SS 2022 collection, featuring three different aspirational paths to read into the emerging feelings of the “new normal” that is our time and that may characterize the near future.

  • Riri’s SS 2022 collection explores the mind of the future.
  • Bright colors, vintage themes as well as timeless designs and attention to detail, combined with concepts that highlight history and processes.

Riri Group’s gaze looks to the future once more, offering a line of accessories where creativity meets cutting-edge technology. This is the scenario spawning the new SS 2022 collection; a range of innovative proposals each representing a different emotional response to the pandemic, an attempt to interpret the emotions, needs and desires of consumers in the coming years.

The Italian-Swiss group, that for almost a century has committed to creating zips and buttons for the world’s most important fashion brands, doubles down on its forward-looking vision. The result is SS 2022 collection, featuring three different aspirational paths to read into the emerging feelings of the “new normal” that is our time and that may characterize the near future.

REJOICE
Inspired by sensations of euphoria and breaking free from melancholy through evasion and exuberance, Rejoice is the line that sees in positivity and joy of re-living the answer to the months of pandemic and negativity. The optimism that is to come takes the form of a creative and extrovert style, even when it comes to accessories. The inspiration, a triumph of bright colors and timeless styles, comes straight from the streets of Boca, one of Buenos Aires’ most popular neighborhoods thanks to its combination of colors and creative scene. Thus, the Eloxal rio zip is presented once again: with its aluminum chain and colored teeth, matched with a multi-color effect puller. In the range, we can also find the Nylon zip, featuring changing colors matched with buttons that echo their color variations, or the Filmetal 14 zip, big and with eye-catching writings, embossed on the tape.

REBIRTH
Going back to the future, in a more respectful and responsible way, through a rebirth that comes to be thanks to a closer relationship with nature. In this line history and processes through which the product is made are pivotal to tell a new way to approach the world. The range comprises zips and buttons developed with natural material and processed manually. A return to the basics as well as the constant research to reduce resources use respecting the planet are foundation of this line. Part of the Rebirth line are the copper jeans buttons, with a special water-based paint finishing, transparent and protective, or the hemp-derived bio-plastic eyelets, as well as the galalite buttons, a particular bio-degradable plastic, derived from processed milk proteins. A major innovation are our tapes entirely made of recycled polyester, evidence of the commitment by Riri Group to reuse resources.

TIMELESS
Timeless elegance, essential luxury mixed with the highest quality standards for top-of-therange products. Design, materials and colors featuring in this line break away from seasonal trends to become timeless must-haves, essential yet elegant. Every piece is cared for in every detail, created specifically to leave a lasting mark. Buttons, chains and pullers are either made of gold and silver, or they feature the clean and elegant tone of stainless steel. Among the zips, stand out Metal and Simmetrical with luxury finishings, whilst tapes are made with refined materials, such as leather and satin. Essential yet researched, this range comes with square and oval cuts, with geometry being functional and complementary to a timeless elegance.

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics (c) Ascend
Acteev Protect™ yarns and fabrics
09.12.2020

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

The S Group offers complete supply chain management for apparel brands, including product development, manufacturing, logistics, quality assurance, packaging and order fulfillment. The company lists some of the world’s most recognized brands among its partners, including Lululemon, New Balance and Mack Weldon. Athleisure, performance, scrubs, and seamless products such as intimates, leggings, active wear, socks and gaiters will be available.

Gary Peck, CEO of The S Group, says his team is excited about the commercial potential of Acteev, especially given the new reality of global health concerns. “Garment design has primarily focused on functionality, sustainability and comfort,” said Peck. “The past year has made us all aware that safety can be a valuable feature of fabrics as well, and Acteev checks all those boxes.”

Acteev is Ascend’s patent-pending technology that embeds zinc ions in a polymer to create fibers with long-lasting antimicrobial properties. The result is a fabric that destroys odor-causing bacteria and fungi. Acteev technology is available in a wide range of textiles featuring the flexibility, softness and durability of nylon 6,6.

Recent testing on knit fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with 99.9% efficacy on contact1. Ascend is working with the U.S. Environmental Protection Agency, the U.S. Food and Drug Administration and other governmental agencies to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties.

Riri Group boosts its offer with Cobrax Metal Hub. (c) Riri Group
RIRI GROUP Cobrax Metal Hub
12.11.2020

Riri Group boosts its offer with Cobrax Metal Hub.

  • The new company in the Group is dedicated to metal accessories for luxury and haute couture, in the heart of the Tuscan fashion district.

Mendrisio – Another important milestone has been reached at Riri: the incorporation of Cobrax Metal Hub, the new company in the Group which specialises in the design, development and manufacturing of metal components for the luxury and haute couture sector. The company’s headquarters are in the heart of the Tuscan fashion district, combining high quality Made in Italy, decades-long expertise and the care for details which has always characterised Riri.

  • The new company in the Group is dedicated to metal accessories for luxury and haute couture, in the heart of the Tuscan fashion district.

Mendrisio – Another important milestone has been reached at Riri: the incorporation of Cobrax Metal Hub, the new company in the Group which specialises in the design, development and manufacturing of metal components for the luxury and haute couture sector. The company’s headquarters are in the heart of the Tuscan fashion district, combining high quality Made in Italy, decades-long expertise and the care for details which has always characterised Riri.

The new company is a result of the acquisition of 2Frame, a historical Italian brand in the industry, which is now an integral part of the Riri family, under the new name Cobrax Metal Hub. Thanks to this new entry, the Swiss Group has become the first sole supplier of metal accessories for the leatherwear industry, adding to its traditional range of zips and buttons a new line of products which includes all types of fastening, padlocks, snap hooks and buckles. It is an actual strategic hub, to offer the brands a single contact point for any needs and requests concerning metal accessories.

This new acquisition also makes it possible for Riri to respond, in an even faster and more effective way, to the demand for developing new articles and prototypes. By focusing on customer needs, Cobrax Metal Hub is actually able to design and develop customised products, guaranteeing continuous support in all process phases: from the search for materials, to technical and finishing solutions, the prototyping and sampling stage, to the industrialisation and manufacturing stage.

Renato Usoni, CEO at Riri Group adds: “Thanks to Cobrax Metal Hub the Riri Group has become the first sole supplier of accessories for the leatherwear sector. It is a project intended to add value and increase the company’s ability to serve its market, providing increasingly comprehensive and tailor-made answers, bearing witness to a vision whereby investing in the future is the best response to the scenarios, more complex than ever before, with which the whole market is confronted today”.

Source:

Menabò Group

Sateri Sustainability Vision for 2030 (c) Sateri
02.11.2020

Sateri Launches Sustainability Vision for 2030

  • Sateri pledges to Be World’s Leading Net-Positive Fibre Producer

Sateri, one of the world’s largest viscose producer, has launched its sustainability vision for 2030 to guide the company’s strategic growth in the coming decade. The Vision is anchored around four key pillars in response to environmental and social challenges faced by the cellulosic fibre industry: Climate and Ecosystem Protection, Closed Loop Production, Innovation and Circularity, and Inclusive Growth.

The Vision comes with a time-bound roadmap and measurable targets. It encompasses notable targets including net-zero carbon emissions by 2050, achieving 98% Sulphur recovery rate at all its mills by 2025, utilising textile waste and produce viscose products with 50% recycled content by 2025 and 100% by 2030, and supporting more than 300,000 local families and smallholder farmers to develop sustainable livelihoods.

  • Sateri pledges to Be World’s Leading Net-Positive Fibre Producer

Sateri, one of the world’s largest viscose producer, has launched its sustainability vision for 2030 to guide the company’s strategic growth in the coming decade. The Vision is anchored around four key pillars in response to environmental and social challenges faced by the cellulosic fibre industry: Climate and Ecosystem Protection, Closed Loop Production, Innovation and Circularity, and Inclusive Growth.

The Vision comes with a time-bound roadmap and measurable targets. It encompasses notable targets including net-zero carbon emissions by 2050, achieving 98% Sulphur recovery rate at all its mills by 2025, utilising textile waste and produce viscose products with 50% recycled content by 2025 and 100% by 2030, and supporting more than 300,000 local families and smallholder farmers to develop sustainable livelihoods.

Highlighting the significance of the Vision to the company, Sateri’s President Allen Zhang said, “As a raw material supplier, Sateri will do our part and respond to the urgent need to decouple growth from further resource impact. This is something that will underpin our growth, in addition to QPC (Quality, Productivity, Cost) and continuous improvement which are well-embedded in the company.”*

Sateri’s 2030 Vision was conceived after months of discussions with management members and external stakeholders including customers, brands and NGOs. The process was facilitated by BSR, a sustainability consultancy, led by its Asia Pacific Vice President, Jeremy Prepscius.

“The challenges facing the garment industry require all value chain participants to invest, innovate and integrate sustainability into their business models. This requires leadership and alignment and will need determination to succeed, which is what Sateri is striving to do,” said Prepscius.*

In the coming months, Sateri will form workgroups to develop action plans to deliver on the identified targets. Progress towards realising Sateri 2030 Vision will be reported in the company’s annual sustainability report and online sustainability dashboard.

Read more about Sateri 2030 Vision: www.sateri.com/sustainability/vision2030/

 

*Please see attached document for more information

Source:

Omnicom Public Relations Group

Meet the new FW 21-22 Riri Group collection (c) Riri Group
Over Shock
13.10.2020

Meet the new FW 21-22 Riri Group collection

  • Technology, creativity and sustainability
  • Recycled materials, bright colours, eclectic shapes: excellence is in the details, and the new creations by the Italian-Swiss group have plenty to say.

Mendrisio – Looking at the new Fall-Winter 2021-2022 collection of the Riri Group, it almost seems as if the difficult months to which the pandemic has forced the whole world, have been another new – though unwanted – challenge for the Italian-Swiss company. A testbed that sparked the mind and lit the fire of creativity. Therefore, today, the brand ingredient which for over 80 years has embellished the
garments designed by major fashion system brands with top-quality zips and buttons, also introduces a wide range of heterogeneous creations, intended to cover different aesthetic and functional requirements on the market.

This collection has been divided into three macro-topics; it is a new chapter in the history of the Group.

  • Technology, creativity and sustainability
  • Recycled materials, bright colours, eclectic shapes: excellence is in the details, and the new creations by the Italian-Swiss group have plenty to say.

Mendrisio – Looking at the new Fall-Winter 2021-2022 collection of the Riri Group, it almost seems as if the difficult months to which the pandemic has forced the whole world, have been another new – though unwanted – challenge for the Italian-Swiss company. A testbed that sparked the mind and lit the fire of creativity. Therefore, today, the brand ingredient which for over 80 years has embellished the
garments designed by major fashion system brands with top-quality zips and buttons, also introduces a wide range of heterogeneous creations, intended to cover different aesthetic and functional requirements on the market.

This collection has been divided into three macro-topics; it is a new chapter in the history of the Group.

LIFE SERVING
Keyword: sustainability. Or, more romantically, “Reuse with love”. From the use of materials produced using organic waste and recycled plastics to actual destocking – the re-introduction on the market of unsold items to give them new life through a restyled shape: the topic of “life serving”, for Riri, translates into the meticulous and constant search for materials with a low environmental impact and in the committed attempt to reduce the use of plastic to a minimum. This is why the Group has decided to use recycled polyester tapes, made with new organic cotton, pullers coated with cork, created using 100% recycled plastics or rubber taken from the sole of shoes. Stainless steel – an exceptionally resistant and sturdy material, as well being subject to no galvanic treatments and highly recyclable – characterizes chains and pullers, while the Nylon zip consists of fully recycled tape and chain, and Decor introduces a new 100% polyamide version. On the button side, “life serving” includes buttons with a cork coating, the Zero button with coating made of recycled Meryl polyamide and the F4 with a 100% recycled Nylon head and the heads made of APILON 52 (rubber made of 65% vegetable oils and energy from renewable sources) coated with microfiber from the company Alcantara.

ENGINEERING
This is definitely the most rigorous yet progressive section in the collection, drawing on technological innovation and on uncertainties related to the current situation, to play with shapes, colours and materials. Between zips and buttons there is a prevalence of squared and minimal shapes, also on the tapes of the zips through sublimation and digital printing techniques. The leading colour is grey in its variation of hues, where the insertion of coloured tones sometimes stands out. The leading material, on the other hand, is metal.

OVER SHOCK
A creative topic where “exaggeration” is the keyword, a trend whose style and character somehow remind us of Gen-Z, apart from being especially suitable for outdoors. “Over state” uses the hip hop mood and settings of the Nineties, taking them to the extreme, enlarging shapes and focusing on bright and fluorescent colours such as purple, yellow, blue, orange or green. An example of this is Storm Evo, a zip which is popular in the outdoor sector for its high levels of water resistance and strength, which features a new electric blue chain and tape with reflecting side strips. Also outstanding in terms of originality is the new purple puller, with its anti-theft shape, fixed onto a fluorescent yellow chain. The perfect expression of this category are zippers such as Decor, Nylon and Aquazip, especially recommended for the outdoor sector in general.

COLLECTION HIGHLIGHTS: RESTYLING AND INNOVATION
All the macro-categories selected for the FW 21-22 seasons are included in some special product innovations, most notably the even more minimal and thin shapes of some buttons and the introduction of five different colours for the small synthetic ring, a real point of strength in Cobrax pressure buttons. Also the range of magnetic buttons is complemented by the addition of two extra snaps. As regards zips, the Riri Group team has been working on careful restyling of shapes, more specifically in the shapes of Decor zip bodies – ideal for the luggage industry – further improved from both an aesthetic and functional viewpoint.

More information:
Fashion Mode Riri Group
Source:

Menabò Group

Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy® Results in Innovative Fabrics for Fashion and Athleisure (c) Sateri
StretchCosy
10.09.2020

Innovative Fabrics for Fashion and Athleisure

  • Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy®

DuPont™ Sorona® and Sateri’s EcoCosy® have together developed a new fabric called StretchCosy™. The fabric uses a blend of Sorona®, a partially plant-based fibre, and Sateri’s ultra-comfortable and near weightless EcoCosy® fibres to achieve a soft material that is highly stretchable, shape-retaining and, most importantly, sustainably sourced.

StretchCosy™ combines the mechanical stretch of Sorona® stretch fibres, which gives it excellent stretch and long-lasting, consistent recovery, with the soft, cotton-like breathability and smooth silk-like texture of EcoCosy® for an unparalleled fabric that is high-performing and well-suited for fashion and sportswear.

  • Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy®

DuPont™ Sorona® and Sateri’s EcoCosy® have together developed a new fabric called StretchCosy™. The fabric uses a blend of Sorona®, a partially plant-based fibre, and Sateri’s ultra-comfortable and near weightless EcoCosy® fibres to achieve a soft material that is highly stretchable, shape-retaining and, most importantly, sustainably sourced.

StretchCosy™ combines the mechanical stretch of Sorona® stretch fibres, which gives it excellent stretch and long-lasting, consistent recovery, with the soft, cotton-like breathability and smooth silk-like texture of EcoCosy® for an unparalleled fabric that is high-performing and well-suited for fashion and sportswear.

Created in 2019, StretchCosy™ is a fabric breakthrough that made it possible for natural plant-based fibres to be more extensively used in various applications, e.g. t-shirts, shirting, bottoms, jackets, dresses, hoodies and underwear. Previously, cellulosic fibres were rarely found in sportswear, due to concerns such as pilling. The combination of Sorona® and EcoCosy® in StretchCosy™ has eliminated this concern, hinting at the future of activewear where performance combined with sustainability will be the norm.

Source:

Omnicom Public Relations Group

“Winterstorm”: the Riri Group presents the new collection for the FW season 2020-21. (c) RIRI Group
02.09.2019

“Winterstorm”: the Riri Group presents the new collection for the FW season 2020-21

  • Ice, style and performance

These are the keywords which describe the new eclectic creations by the Riri Group for the Fall Winter season 2020-2021: a journey through the winter, its atmosphere and its colours Mendrisio, September 2019 - Première Vision Paris (17 - 19 September) will set the stage for the new proposals for the Fall Winter 2020-21 collection by the Riri Group, a leading brand in the zip and button manufacturing sector for high couture and outdoor apparel. A preview of the new collection by the Swiss group will take place at Munich Fabric Start (3 – 5 September).

COLOURS, MATERIALS AND TEXTURES

  • Ice, style and performance

These are the keywords which describe the new eclectic creations by the Riri Group for the Fall Winter season 2020-2021: a journey through the winter, its atmosphere and its colours Mendrisio, September 2019 - Première Vision Paris (17 - 19 September) will set the stage for the new proposals for the Fall Winter 2020-21 collection by the Riri Group, a leading brand in the zip and button manufacturing sector for high couture and outdoor apparel. A preview of the new collection by the Swiss group will take place at Munich Fabric Start (3 – 5 September).

COLOURS, MATERIALS AND TEXTURES

Winter landscapes and polar tones have inspired the colours of this new collection: nuances of grey, azure and white remind us of the typical tones of ice; also dominant is the presence of blue, intense and rich in contrast thanks to the attractive green inserts; black interventions are then harmoniously inserted as part of the colour palette, creating an appealing interplay of colour references. Tapes, pullers and chains provide new pleasant tactile sensations and unexpected visual inputs, through the search for always new processing methods the iceberg effect reproduced with a laser system, the texture reminding us of snake skin, from marble effect to horn processing, and freehand diamond turning, as well as the three-dimensional drop varnishing and the stylish mother-of-pearl effect.

NOVELTIES

The guiding thread for the new “Winterstorm” collection is the use of nuanced colours and ‘ice-like’ effects, reminding us of winter landscape and climates, as in the new Decor Cristal zip with transparent chain or in the Aquatyre zip, available also in a new luminescent version. Among the new creations, the Metal 3H zip stands out: the smallest and most innovative in the collection, lightweight and with a streamlined design. The provocations for this fall-winter have reached extreme levels, with a zip made of synthetic fur and incorporated buttons, whose cover can be removed and then reapplied, to face polar temperatures with a touch of glamour. Alongside the most fashionable novelties, the research by the Riri group does not cease to surprise in the outdoor sector also as regards buttons. This is confirmed by Rislide, the snap closure with a nylon body and Zama button. The innovative b-lock pressure button – with high lateral hold – has been restyled with a silicone shaped head in three colours. As part of a collection characterised by style and performance elements, it is definitely worth mentioning Zero, also in its invisible version: this button – thanks to its elegant design, combines practicality and style without compromising on performance.

More information:
Riri Group Accessoires
Source:

RIRI PRESS OFFICE Menabò Group

26.07.2018

Bally Completes its Executive Team

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

More information:
Bally
Source:

NETWORK PUBLIC RELATIONS GMBH

Ternua Group chooses Lectra Fashion PLM 4.0 (c) Tenua Group
21.03.2018

Ternua Group chooses Lectra Fashion PLM 4.0

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

  • Spanish outdoor and sportswear market leader expands international presence thanks to Lectra’s latest product lifecycle management solution

Ismaning/Paris – Lectra, the technological partner for companies using fabrics and leather, is pleased to announce that the Ternua Group, a world-renowned Spanish outdoor clothing and sportswear group, has chosen Lectra Fashion PLM 4.0 to increase their geographical presence by improving global teamwork.

Founded in 1994, the Ternua Group has achieved worldwide success by promoting adventure through respect for nature, producing sustainable technical clothing for outdoor sports enthusiasts worldwide. The group’s strong commitment to the environment is shown through their R&D that focuses on developing their own fabric by using eco-friendly materials such as organic cotton and recycled down.

Today, the group’s portfolio includes three brands Ternua, Astore and Lorpen, currently exporting to more than 50 countries, with operations in Europe, America and Asia. Compounding this global success, the ambitious group plans to penetrate more markets across the globe.

The group is implementing Lectra Fashion PLM 4.0 into their entire production process. Specifically developed to help fashion companies navigate the digital era, this modular and user-friendly solution will help the Ternua Group centralize and store information coming from their brands by digitalizing their supply chain. This will connect all teams involved in the design-to-production process, regardless of geographic location. Team members will also be able to comm unicate better with external suppliers, access accurate information and keep track of every collection’s development progress. The group can hence speed up the entire production process and help their brands deliver their collections to markets all over the world on time.

“We manage our design and product development processes in-house but outsource our production in Europe, north of Africa and Asia. For our business to expand globally, we need to go fully digital. By having a system that consolidates and standardizes data coming from all supply chain actors across the world, we can respond faster to consumer demand,” explains Aitor Barinaga, Chief Operations Officer, Ternua Group. “We have assessed all other vendors—and Lectra Fashion PLM 4.0 is clearly the winner. It has the ability to fully integrate all processes and improve communication and teamwork across all departments through sound data management. We are more than happy to have a trusted partner as Lectra for such an ambitious project.”

“Ternua Group is constantly pushing the boundaries of innovation. This is shown through their desire to help customers achieve their personal best by providing them with high-performance technical wear that is also environmentally friendly. We are thrilled to embark on this new journey with the Ternua Group, and we are confident that our solution and expertise will help them get their collections out to new markets on time,” says Rodrigo Siza, Managing Director, Spain and Portugal, Lectra.

Source:

Lectra