From the Sector

Reset
23 results
05.09.2023

Beaulieu International Group at International Conference on Geosynthetics

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu International Group will turn the spotlight on geotextile products with sustainability benefits to support progress in resilient civil engineering projects at the 12th ICG Rome from 18th -21st September 2023, presenting options to target fossil carbon reduction by choosing PP-based staple fibres or woven geotextiles that are among the lowest in carbon footprint for geosynthetics.

For manufacturers of nonwoven geotextiles, Beaulieu Fibres International (BFI) offers PP fibres with > 25% carbon footprint reduction compared to the European standard PP fibres, generating 1.48 kg CO2/kg PP fibres. A step further is to accelerate the replacement of fossil carbon in engineered fibre applications by choosing its ISCC Plus certified bio-attributed MONO-PP with a negative carbon footprint.

For construction projects, nonwoven geotextiles made with high-tenacity HT8 fibres are proven to secure a longer service lifetime and reduce the environmental impact, as they offer high mechanical performance at a reduced weight.

Beaulieu Technical Textiles' (BTT) woven geotextiles provide a wide range of functions, including separation, filtration, reinforcement and erosion control, and are among the most sustainable in the industry. Depending on weight, the carbon footprint of its woven geotextiles (m²) ranges between 0.37 and 1.40 kg CO2 eq./m². They also minimize the use of natural resources for more sustainable infrastructure development. Case studies such as at the Ostend-Bruges airport highlight significant CO2 reduction on the jobsite by replacing the transport of 960 trucks of gravel with 3 trucks of woven geotextiles, and by extending the runway’s life span.

The ICG launch of its new line Terralys MF woven filtration geotextiles with monofilament boosts the performance of a common solution in building layers that require high water flow rates. High-tenacity extruded polypropylene tapes and monofilaments are interwoven to form dimensionally stable and highly permeable geotextiles. These new filtration geotextiles provide greater resistance to dirt and biological clogging. They allow water to travel freely while reducing soil erosion when employed as a separation and stabilizing layer.

As of September 2023, all PP staple fibres and woven geotextiles will have Environmental Product Declarations (EPD) based on LCAs. Each EPD is an essential tool for communicating and reporting on the sustainability performance and helps carbon-conscious customers in their purchasing and decision making. Registered EPDs are globally recognized, publicly available and free to download through EPD Libraries.

Source:

Beaulieu International Group

OETI purchases ECS to expand its PPE portfolio photo: OETI
12.07.2023

OETI purchases ECS to expand its PPE portfolio

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

ECS tests and evaluates occupational health and safety goggles with and without a filter action, passive and active switching protection filters and shields for welders, and laser protection filters, goggles, and shields. The company also tests the optical properties of sunglasses, sports glasses, ski goggles, swimming goggles and motorbike goggles.

With OETI’s takeover, the ECS location in Aalen is retained, and all employees will continue working at ECS. The new Managing Director of ECS GmbH as of 1 July 2023 is Dipl.-Ing. Rolf Diebolder.

‘We are present on the European market, on the American market and, via a representative office, on the Chinese market. With the aid of the new distribution channels through OETI and TESTEX, we want to steadily advance ECS’ expansion and be present on all five continents’, says Managing Director Rolf Diebolder, explaining his strategic plans for ECS. ‘I would like OETI and ECS to develop a joint strategy in order to be able to offer existing and new customers of both companies a complete package which, when combined, will give us a unique selling point in the marketplace’, says Diebolder.

Diebolder also sees further potential in the cooperation with regard to protective laser clothing. According to him, this is where the laser laboratory commissioned by ECS could be used to make textiles laser-safe. In the future, there will be more and more ‘hand-held’ devices, i.e. laser welding devices, for which gloves and protective jackets are needed.

Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Celliant -how it works (c) Hologenix
06.04.2023

Hologenix: Infrared technology with potentially positive impact on diabetic patients

The diabetic community has always been a priority for Hologenix, creators of CELLIANT® infrared technology, so the company embarked on an initial study to test the hypothesis that the technology can positively impact diabetic patients with vascular impairment, now published in Journal of Textile Science & Engineering. Another study is underway as well with more research on the horizon.

The diabetic community has always been a priority for Hologenix, creators of CELLIANT® infrared technology, so the company embarked on an initial study to test the hypothesis that the technology can positively impact diabetic patients with vascular impairment, now published in Journal of Textile Science & Engineering. Another study is underway as well with more research on the horizon.

According to statistics cited in the International Diabetes Federation Diabetes Atlas, 9th edition, globally, close to a half billion people are living with diabetes and that number is expected to increase by more than 50 percent in the next 25 years.
 
The introduction of the study in the Journal of Textile Science & Engineering also reports that diabetic patients frequently suffer from a combination of peripheral neuropathy and peripheral artery disease, which particularly affects their feet. It further states that it has been estimated that the lifetime risk for the development of foot ulcers in diabetic patients can be as high as 25 percent and that the risk of amputation is 10 to 20 times higher than in non-diabetic subjects.
 
The study was performed by Lawrence A. Lavery, D.P.M., M.P.H., a Professor in the Department of Plastic Surgery at UT Southwestern Medical Center. His clinic and research interests involve diabetic foot complications, infections and wound healing, and he participated in the conception, design, implementation and authorship of the Journal of Textile Science & Engineering study.  

CELLIANT technology is a patented process for adding micron-sized thermo-responsive mineral particles to fibers, in this case polyethylene terephthalate (PET) fibers. The resulting CELLIANT yarns were woven into stockings and gloves containing either 82% CELLIANT polyester, 13% nylon and 5% spandex or for the placebo, 82% polyester with no CELLIANT, 13% nylon and 5% spandex. CELLIANT products absorb body heat and re-emit the energy back to the body as infrared energy, which is non-invasive and increases temporary blood flow and cell oxygenation levels in the body.

The objective of the study was to “evaluate changes in transcutaneous oxygen (TcPO2) and peripheral blood flow (laser Doppler, LD) in the hands and feet of diabetic patients with vascular impairment when CELLIANT gloves and stockings are worn.” While there was not a statistically significant result across all subjects, the study did show that some patients wearing CELLIANT stockings for 60 minutes had an increase of as much as 20% in tissue oxygenation and 30% in localized blood flow. According to the study’s conclusion, “the trends that were observed in favor of CELLIANT stockings suggest that a larger well-designed clinical trial should be undertaken and may provide evidence of clinical efficacy in treatment of the diabetic foot.”
 
The study also notes that “There have been no documented or observed side effects of wearing CELLIANT stockings, and they are relatively inexpensive compared to conventional pharmaceutical interventions.”

Hologenix has embarked on a more comprehensive trial, “Study to Evaluate CELLIANT Diabetic Medical Socks to Increase Tissue Oxygenation and Incidence of Complete Wound Closure in Diabetic Foot Wounds” – NCT04709419, which focuses on the impact of CELLIANT technology to potentially improve tissue oxygenation and wound healing outcomes.
 
“We are excited to explore whether future studies of infrared, with its most common biological effects of increased localized blood flow and cellular oxygenation, could result in a breakthrough in diabetic patients with vascular impairment,” said Seth Casden, Hologenix Co-founder and CEO. “We see a huge potential opportunity with this research for helping to fulfill our core mission of improving people’s health and well-being by potentially reducing the impact of diabetes, and we are actively seeking partners to expand our research efforts.”

Source:

Hologenix

13.02.2023

CELLIANT cleared to market in 50+ countries

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

  • Registered in majority as a class 1 medical device  

CELLIANT -  a performance textile that converts body heat into infrared energy - is designated as a Class 1 Medical Device in Australia, Canada, the EU and European Economic Area (EEA), Japan, New Zealand, the United Arab Emirates, the United Kingdom and the United States. CELLIANT is cleared to market in China, India, Indonesia, Korea, Malaysia, Mexico, Peru, Philippines, Russia, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand and Vietnam, with more countries and regions to follow.

In 2017, the FDA determined that products containing CELLIANT are medical devices as defined in section 201(h) of the Federal Food, Drug and Cosmetic Act and are general wellness products because they are intended to temporarily increase blood flow and local circulation at the site of the application in healthy individuals.
 
At Hologenix®, whose CELLIANT® infrared technology is an ingredient in world-class brands across many categories, science matters. The company has a distinguished Science Advisory Board composed of experts in the fields of photobiology, nanotechnology, sleep medicine, diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that collectively demonstrate CELLIANT’s effectiveness and the benefits of infrared energy. This claim set provides the basis for products containing CELLIANT to be designated as a Class 1 Medical Device in 38 countries and cleared to market in 15, with more countries and regions to follow. This elevated status in 53 countries translates to CELLIANT being an ideal partner for global companies who are seeking innovation in textiles to distinguish their products.   

“We have laid the groundwork for our partner brands to capitalize on the benefits of our infrared technology and to enhance their ability to do business,” said Seth Casden, Hologenix co-founder and CEO.  “We firmly believe that regulatory status matters and that is why we have grown the number of countries we have such relationships with by over a third in the last three years. It is definitely a competitive advantage of our company and CELLIANT.”

“Globally, the awareness of the benefits of infrared textiles, which absorb body heat and reflect it back as therapeutic infrared energy, has grown exponentially over the last 10 years,” continued Casden. “And in the United States infrared is gaining a strong foothold.”

Source:

Hologenix

(c) DOMO Chemicals
29.04.2022

DOMO Chemicals expands production capacity of TECHNYL® polyamide in China

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

  • The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
  • Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

  • Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
  • A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
  • Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

Source:

DOMO Chemicals / Marketing Solutions NV

30.03.2022

Suominen launches BIOLACE® Zero, its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

Suominen is a pioneer in sustainable nonwovens and we have a wide range of sustainable nonwoven products for different applications. Suominen’s R&D team has excellent know-how on sustainable fibers and we are also continuously collaborating with innovative partners to develop new and innovative solutions with a reduced environmental impact into our product portfolio.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

Source:

GlobeNewswire

29.03.2022

Suominen launches its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

More information:
Suominen nonwovens Lenzing Group
Source:

Suominen

RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections (c) Checkpoint Systems GmbH
Checkpoint Systems PTS Sustainable Label
08.03.2022

New RF- Security Labels von Checkpoint Systems

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

  • Sustainability and security combined:
  • RF security labels from Checkpoint Systems can be fully recycled as part of kerbside paper-based recycling collections

To ensure that its retail customers are not negatively affecting the recyclability of product packaging by attaching security labels,Checkpoint Systems partnered with PTS – an organisation with over 70 years’experience researching the use of fibre-based solutions – to conduct a series oftechnical tests on its range of labels. The technical report concluded that consumers can safely dispose of a Checkpoint security label in a household recycling bin, without having to separate the label from the packaging, knowing that the entire pack will be recycled.

The Germany-based research consultancy PTS tested a range of Checkpoint labels. PTS analysed the labels, which were different sizes and materials, to ensure that following the standard kerbside recycling process, the recycled, fibre-based material would be of acceptable quality. Each label was applied to a piece of cartonboard to simulate a real-world scenario and the results show that all are classified as being recyclable in accordance with current regulations. All labels – including the 410 RF, 2928 RF and 4210 RF labels – achieved an excellent overall recyclability rate of over 94%.

Sustainability is essential

With brands making strong commitments to sustainability – including investing in more environmentally friendly forms of packaging like cartonboard – and consumers increasingly demonstrating their preferences for sustainable packaging it is pivotal that anything applied to an item – at any point along the supply chain or in-store – does not affect the recyclability of its packaging.

Security labels play a vital role in ensuring products remain available to purchase. Retailers have been using a diverse range of labels to protect their merchandise, working with suppliers to ‘tag’ items at source or relying on store associates to apply labels in-store. As one of the largest suppliers of RF-based Electronic Article Surveillance (EAS) labels globally, Checkpoint’s labels are applied to millions of products, which are packaged in different materials. Typically, when recycled, packaging labels tend to end up in a combination of different rubbish and recycling streams, depending on the packaging material and the consumer commitment to recycling.

Until today, the recyclability of these labels has been relatively unknown. It means that retailers and consumers could inadvertently be contaminating the paper-based packaging recycling stream with millions of security labels – still attached to packaging which could have otherwise been recycled up to 25 times.

“Security labels play an important role in helping retailers protect their profits, but it is vital they don’t stop packaging from being recycled. We are delighted to have achieved this accreditation from PTS that shows our labels can be recycled through the existing kerbside collections. It means that brands and retailers can be assured they are not negatively affecting a country’s recycling rate, while also knowing their customers can conveniently dispose of the entire pack, packaging material and label, in the same household recycling bin. Our labels passed all of PTS’ stringent tests meaning they have little to no impact on the recyclability of a piece of cartonboard packaging." 

23.09.2021

NCTO: U.S. Trade Representative Katherine Tai highlights U.S. Textile Industry

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The Ambassador’s visit to Milliken included a tour of the company’s Magnolia plant in Blacksburg, S.C., and a roundtable discussion highlighting the important role women contribute to textiles, the critical need for policies supporting a domestic supply chain, and the significant impact of the sector to the U.S. economy. Milliken is one of the largest textile companies in the U.S., employing more than 6,000 associates domestically and an additional 1,350 associates globally. Milliken’s Textile Business alone employs 2,500 people across eight counties in South Carolina and is the fourth largest manufacturing employer in the Upstate.

On the second leg of her trip, Ambassador Tai visited American & Efird’s manufacturing facility in Mount Holly, N.C. American & Efird operates as part of Elevate Textiles and its global portfolio of advanced products and distinguished textile brands, including A&E, Burlington, Cone Denim, Gütermann and Safety Components, and representing more than 500 years of textile manufacturing knowledge.

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industry participated in a roundtable with the Ambassador at which they discussed the competitiveness of the domestic industry, outlined priority issues in Washington, such as the importance of the Western Hemisphere co-production chain and ways to jointly support domestic supply chains through Buy American and Berry Amendment policies that help onshore production, spur investment, maintain the safety and security of our armed forces and generate new jobs.

MS establishes new business unit "Nonwovens" (c) MS Ultraschall Technologie GmbH
MS UTG Kampagnenmotiv
11.08.2021

MS establishes new business unit "Nonwovens"

The MS Ultrasonic Technology Group is a globally recognized technology and innovation leader in ultrasonic joining technology and develops and builds flexible special machines, pioneering series machines, modular systems and efficient components for high-performance complete solutions.

This enables optimal welding, punching, sealing, cut-off welding and riveting of thermoplastics, textiles and nonwovens as well as cutting of food and other products.

To ensure sustainable growth, MS is focusing on expanding its application portfolio and entering new market segments. MS Ultrasonic Technology Group is part of the listed MS Industrie AG with internationally active companies.

In addition to the company's previous activities, MS is now placing a new focus on the continuous welding of nonwovens and other materials.

The MS Ultrasonic Technology Group is a globally recognized technology and innovation leader in ultrasonic joining technology and develops and builds flexible special machines, pioneering series machines, modular systems and efficient components for high-performance complete solutions.

This enables optimal welding, punching, sealing, cut-off welding and riveting of thermoplastics, textiles and nonwovens as well as cutting of food and other products.

To ensure sustainable growth, MS is focusing on expanding its application portfolio and entering new market segments. MS Ultrasonic Technology Group is part of the listed MS Industrie AG with internationally active companies.

In addition to the company's previous activities, MS is now placing a new focus on the continuous welding of nonwovens and other materials.

More than 30 years of experience in the development and production of high-quality and innovative ultrasonic components, coupled with know-how in drive and control technology, will be incorporated into the new business segment. This means that customers receive ready-to-integrate systems with maximum precision from a single source. With the new MS Competence Center in Ettlingen (Germany), MS is fulfilling the wish of many customers to expand its application portfolio to include continuous joining, embossing and perforating of nonwovens and sealing of packaging.

MS is thus adding an innovative and specialized site, while maintaining a high level of vertical integration and support for all specialist areas through its main site in Spaichingen (Germany). In two application laboratories and a measurement and analysis laboratory, tests, evaluations and optimizations of various welding tasks are just as much a part of the service as the in-house production of engraving rollers through to complete systems.

  • Application engineering consulting for your welding task
  • Support in the design of the engraving roll
  • Execution of feasibility studies
  • Welding tests to determine the process parameters
  • Individualized process optimization
  • Finding solutions for problematic welding applications
  • Testing of quality-describing characteristics (tightness, porosity, strength)
  • Microscopic analysis of the welded joint in 3D
  • Sample creation and pre-series production
Source:

MS Ultraschall Technologie GmbH

02.08.2021

EDANA and INDA: 2021 NONWOVENS STANDARD PROCEDURES

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

The harmonized methods contained in the Nonwovens Standard Procedures (NWSP) edition include 107 individual test procedures and guidance documents to support applications across the nonwovens and related industries, and are available on both www.inda.org and www.edana.org.

The 2021 edition includes updated or modified procedures with a numbering structure that makes the document intuitive to search and use. Additionally, each method also includes a page to summarize and track relevant changes made to the document. In an effort to make all methods more consistent, each one is now presented in a format building on the International Standards Organisation (ISO) template, facilitating any future possible submission to ISO in an effort to become a recognized international standard or technical specification.

As in previous editions, the table of contents for the Nonwoven Standard Procedures document includes references to existing related ISO standards, which makes it easier for technicians to choose the most relevant procedure or methods to apply to their product.

Source:

INDA / EDANA

Infinited Fiber and Patagonia seal Multiyear Sales Deal (c) Infinited Fiber Company
28.06.2021

Infinited Fiber Company and Patagonia seal Multiyear Sales Deal

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

In April, Infinited Fiber Company announced plans to build a flagship factory in Finland to meet the growing demand for Infinna from global fashion brands. It is currently supplying customers from its R&D and pilot facilities in Espoo and Valkeakoski, Finland. The planned flagship factory will have an annual production capacity of 30,000 metric tons, which is enough fiber for roughly 100 million T-shirts made with 100% Infinna. Infinited Fiber Company expects to have sold the new factory’s entire output for several years during 2021.

More than 92 million metric tons of textile waste is produced globally every year and most of this ends up in landfills or incinerators. At the same time, textile fiber demand is increasing, with Textile Exchange estimating the global textile fiber market to grow 30% to 146 million metric tons by 2030 from 111 million metric tons in 2019. Infinited Fiber Company’s fiber regeneration technology, which uses cellulose-rich waste streams as its raw material, offers a solution both to stop waste from being wasted and to reduce the burden of the textile industry on the planet’s limited natural resources.

24.06.2021

The EFI Reggiani BOLT delivers higher Image Quality

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

  • Nozzle out and uniformity compensation features that improve solid colour appearance and enhance overall printing quality
  • Increased performance and improved processing speed for large, complex files
  • Integration of a new digital camera that both provides for precise and consistent print results and shortens the time for print head replacement and alignment
  • An enhanced user interface – based on EFI Fiery Command WorkStation® 6.0 – that is easier to use
  • Fiery Smart Ink Estimator, a key tool to help determine job profitability based on accurate calculation of ink costs prior to printing.
09.02.2021

Sicomin: Collaboration with GREENBOATS® for natural fibre composite

Sicomin announces its latest collaboration with GREENBOATS® as they deliver the first ever natural fibre composite (NFC) nacelle for an offshore wind turbine.  

With more than 2.5 million tons of composite materials in use in the wind industry globally, and the first generation of wind turbines now approaching end of life, there is still a lack of well-established recycling options. GREENBOATS’ mission is to demonstrate how large-scale NFC structures in wind energy can lower energy consumption in manufacturing and significantly improve the sustainability of the composite materials used in the turbine.

In 2020, GREENBOATS was commissioned by a leading wind energy technology developer to design and manufacture a sustainable NFC nacelle. The resulting 7.3m long structure has a surface area of approximately 100m2 and was engineered by GREENBOATS to satisfy all DNV-GL load cases required for an offshore turbine nacelle, including 200km/h max wind loads and 2KN loads on the guard rails.

Sicomin announces its latest collaboration with GREENBOATS® as they deliver the first ever natural fibre composite (NFC) nacelle for an offshore wind turbine.  

With more than 2.5 million tons of composite materials in use in the wind industry globally, and the first generation of wind turbines now approaching end of life, there is still a lack of well-established recycling options. GREENBOATS’ mission is to demonstrate how large-scale NFC structures in wind energy can lower energy consumption in manufacturing and significantly improve the sustainability of the composite materials used in the turbine.

In 2020, GREENBOATS was commissioned by a leading wind energy technology developer to design and manufacture a sustainable NFC nacelle. The resulting 7.3m long structure has a surface area of approximately 100m2 and was engineered by GREENBOATS to satisfy all DNV-GL load cases required for an offshore turbine nacelle, including 200km/h max wind loads and 2KN loads on the guard rails.

Sicomin’s market leading GreenPoxy® range met these challenging engineering requirements, with the company’s recently expanded manufacturing capability also matching the potential supply volumes required by wind turbine manufacturers.  

Sicomin’s DNV-GL type approved bio-based epoxy was used to infuse BComp flax fibre reinforcements and balsa cores, with Sicomins’ intumescent weatherproof gelcoat applied on the outer surface. Cured panels were cut to shape, formed over a male plug and bonded together, before flax reinforcement plies, hand laminated with GreenPoxy resins and vacuum bagged, were added along all the panel joints lines.  Finally, Sicomin’s highly UV resistant clear coating products were used to protect and enhance the finish of the flax fibre feature stripe details.

Source:

100% Marketing

Photo: ANDRITZ
02.02.2021

ANDRITZ to supply a Wetlace™ CP line to Lotus Teknik, Turkey

International technology Group ANDRITZ has received an order from Lotus Teknik A.Ş., Turkey, to supply a neXline wetlace CP (carded pulp) line for the production of biodegradable, plastic-free wet wipes. Lotus Teknik A.Ş. is a leading nonwoven roll good producer and a member of the Sapro group. Sapro is based in Istanbul, Turkey, and is one of the top three producers of wet wipes globally.  

The neXline wetlace CP line is equipped with state-of-the-art stock preparation equipment, including approach flow and fan pump, opening and blending, TT card, wetlaid forming unit for pulp application, a hydroentanglement system, filtration unit, dewatering, and through-air drying. All components are perfectly designed to produce a first-class biodegradable wipe. The line is scheduled for start-up by the end of 2021.

International technology Group ANDRITZ has received an order from Lotus Teknik A.Ş., Turkey, to supply a neXline wetlace CP (carded pulp) line for the production of biodegradable, plastic-free wet wipes. Lotus Teknik A.Ş. is a leading nonwoven roll good producer and a member of the Sapro group. Sapro is based in Istanbul, Turkey, and is one of the top three producers of wet wipes globally.  

The neXline wetlace CP line is equipped with state-of-the-art stock preparation equipment, including approach flow and fan pump, opening and blending, TT card, wetlaid forming unit for pulp application, a hydroentanglement system, filtration unit, dewatering, and through-air drying. All components are perfectly designed to produce a first-class biodegradable wipe. The line is scheduled for start-up by the end of 2021.

ANDRITZ developed the new neXline wetlace CP line in order to serve the new market trend of sustainable wipes. Lotus Teknik supported the development from a roll goods producer and converter perspective. The partnership follows the successful installation of an ANDRITZ high-capacity spunlace line some years ago. The Wetlace CP new generation of production technology for biodegradable wipes has resulted from ANDRITZ’s extensive knowledge and considerable history of providing technologies for wood-based industries, spunlace and wetlaid roll goods, and the strong collaboration with Lotus Teknik.

Source:

ANDRITZ

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

12.01.2021

Kelheim Fibres first viscose manufacturer worldwide with environmental management system validated to EMAS

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

  • The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

Source:

Kelheim Fibres GmbH

SGL Carbon and Koller Kunststofftechnik manufacture composite windshield for BMW Group (c) Composites United
Skeletal windshield design based on injection molding with carbon fiber profiles
16.11.2020

SGL Carbon and Koller Kunststofftechnik manufacture composite windshield for BMW Group

  • Carbon fibers combined with injection molding replace conventional steel construction
  • SGL Carbon supplies innovative carbon fiber profiles
  • Serial use in a future high-volume model of BMW Group
  • Construction method offers great potential for use in other automotive projects

Already in August, SGL Carbon received a multi-year order from Koller Kunststofftechnik GmbH for the production of novel carbon fiber profiles for serial use in windshields for a future high-volume model of BMW Group.

  • Carbon fibers combined with injection molding replace conventional steel construction
  • SGL Carbon supplies innovative carbon fiber profiles
  • Serial use in a future high-volume model of BMW Group
  • Construction method offers great potential for use in other automotive projects

Already in August, SGL Carbon received a multi-year order from Koller Kunststofftechnik GmbH for the production of novel carbon fiber profiles for serial use in windshields for a future high-volume model of BMW Group.

The profiles are particularly flexible fiber tows, pre-impregnated with thermoplastic resin in various dimensions. They will be compiled by SGL Carbon on the basis of its own 50k carbon fiber at its site in Innkreis, Austria, and subsequently processed by the injection molding experts at Koller to form a skeletal plastic component. The composite component will replace the previous steel-based windshield. Production of the carbon fiber profiles will start in the remainder of 2020 and will then be ramped up gradually over the next few years for the BMW Group model launch.

In the vehicle, the windshield is a connecting element between the roof frames and thus has an important stabilizing function. The carbon fiber profiles add the required stiffness and crash safety to the component. At the same time, they help to significantly reduce the weight of the roof and thus also support the driving dynamics. The injection molding process also enables particularly complex and material-efficient structures. In the BMW Group model, this innovative component concept will cut weight by 40 percent compared to conventional steel designs of the component while creating important space for cable ducts and sensors.

The production of the carbon fiber profiles themselves is also particularly geared to material and process efficiency in large-scale production. The profiles consist of several smaller fiber strands, the so-called rods, and are manufactured using the modern continuous pultrusion process. During product and process development it was one key objective to ensure that material loss during production is almost completely avoided.

"At SGL Carbon, we have been working on the development of thermoplastic carbon fiber profiles for use in injection molding for some time already. This development work is now beginning to pay off. Due to the many advantages and competitive costs, we see a great potential for the technology to be used in other automotive projects too," explains Sebastian Grasser, Head of the Automotive Segment in the Business Unit Composites - Fibers & Materials at SGL Carbon.

"Innovative lightweight construction with hybrid designs has developed into a strategically conclusive concept for Koller Group's OEM customers," confirms Max Koller, CEO of Koller Group. "SGL Carbon's high level of material expertise, combined with the process know-how of KOLLER Kunststofftechnik and KOLLER Formenbau, create the basis for a promising future in innovative lightweight construction technologies. With this order, the BMW Group has confirmed its confidence in the successful cooperation between SGL and Koller; we are particularly pleased about this", said Max Koller.
 
The Koller Group is a globally operating technology company with plants in Europe and China, as well as NAFTA. The Koller Group develops and manufactures lightweight construction, tools and serial components, primarily for the automotive industry.

Source:

SGL CARBON SE

The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles (c) CHT
Cradle to Cradle principles in the CHT Group
30.09.2020

Cradle to Cradle principles in the CHT Group

  • The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles

Progress in itself does not necessarily have to be sustainable but in the CHT Group it certainly does. For this reason the company has defined progress more precisely. The developers and chemists from Tübingen show true inventive talent with sustainable innovations.

According to the CHT Group's self-perception, sustainable innovation always includes a responsibility component for the future. With decades of experience along the textile value chain, the globally active CHT Group offers an incomparably wide range of services focusing on sustainable, resource-saving and forward-looking speciality chemicals and the efficient shaping of textile processes.

  • The CHT Group is constantly expanding its sustainable product range for a circular economy according to the Cradle to Cradle principles

Progress in itself does not necessarily have to be sustainable but in the CHT Group it certainly does. For this reason the company has defined progress more precisely. The developers and chemists from Tübingen show true inventive talent with sustainable innovations.

According to the CHT Group's self-perception, sustainable innovation always includes a responsibility component for the future. With decades of experience along the textile value chain, the globally active CHT Group offers an incomparably wide range of services focusing on sustainable, resource-saving and forward-looking speciality chemicals and the efficient shaping of textile processes.

The circular economy takes over a decisive role: In the CHT Group we are convinced that recyclable textile products are the right means to protect resources and reduce the environmental impact. Therefore, our team works closely with textile manufacturers and brands to achieve the common goal of avoiding waste and harmful substances along the textile production process and thus producing more ecological textiles.

The Cradle to Cradle approach provides a trend-setting concept in the textile world that perfectly fits the company's sustainable strategy: Right from the start products shall be created which are suited for the biological (compostable) or technical (recyclable) circulation.

The CHT Group focuses on the development of dyes, pigments and auxiliaries for textile finishing which can be decomposed without leaving any residues and easily returned to the natural circulation.

For textiles which are to be developed and produced strictly according to the Cradle to Cradle principle, CHT offers a comprehensive, constantly growing, compostable range for textile finishing. With 57 textile auxiliaries and 32 dyes/pigments CHT has succeeded in achieving the highest rating, the Platinum Material Health Certificate of the Cradle to Cradle Products Innovation Institute.

These products help textile manufacturers to achieve the Platinum rating in Material Health, one of five categories of the Cradle to Cradle Certified™ product standard on finished textiles. This contributes to giving textiles a positive ecological footprint.

Textiles can be given the decisive distinguishing feature through the Cradle to Cradle Certified™ product standard. Cradle to Cradle Certified™ is the world's leading science-based standard for safe, recyclable and sustainable materials and products. CHT offers the possibility of designing tomorrow's sustainable textiles already today and is therefore part of the Circular Economy.

Cradle to Cradle Certified™ is a registered trademark of the Cradle to Cradle Products Innovation Institute.

Source:

 CHT Germany GmbH

 New Recycled Fibre FinexTM in Stores; Sateri Partners Fashion Brands to Unveil Product (c) Finex
Finex Circularity Model
08.06.2020

New Recycled Fibre FinexTM in Stores; Sateri Partners Fashion Brands to Unveil Product

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

Shanghai – Sateri has unveiled FinexTM as its new product brand for recycled fibre. FinexTM, short for ‘Fibre Next’, is an innovative next-generation cellulosic fibre containing recycled content. Internationally known outdoor brand Lafuma has produced FinexTM apparel ahead of 618, China’s major mid-year online shopping festival, while independent China designer Rico Lee will launch his FinexTM apparel next month.

Since its announcement in March this year of a breakthrough in commercial production of viscose using recycled textile waste, Sateri has worked closely with its downstream yarn and garment manufacturing partners to bring the recycled fibre product to the consumer market.

“We’re pleased to collaborate with Sateri as one of their first brand partners for FinexTM. Sateri’s dedication to this partnership made it possible for Lafuma to produce T-shirts with this fine quality fibre in a short time. T-shirts made with FinexTM will be among the offerings Lafuma has in store for the 618 festival as we look to support environmentally-friendly and excellent performance solutions to strengthen our position as a leading outdoor apparel brand,” said Wu Qian, General Manager of Lafuma China.

Echoing similar sentiments is Rico Lee who established his own independent label in 2014, “I jumped at the opportunity to collaborate with Sateri when they approached me because FinexTM encapsulates what my brand stands for – Beautiful Technology that combines function and fashion.”

Tom Liu, Sateri’s Commercial Vice President said, “Like our flagship brand EcoCosy®, FinexTM is made from bio-based natural fibres. Innovation and technology has made cellulosic textile fibre recycling possible and FinexTM represents how nature not only renews itself but that products made from nature can also be regenerated. This, at its heart, is what circular fashion looks like. Our brand promise to customers remains constant– Sateri’s products are sustainable, high quality, efficient, and cost-effective. The FinexTM tagline ‘Together For A Better Next’ expresses our aspiration to be the partner of choice for next-generation fibre - we thank Lafuma and Rico Lee for pioneering with us on this quest.”

Last month, Sateri announced its entry into China’s Lyocell fibre market. The recent string of product portfolio expansion announcements is underpinned by Sateri’s business strategy to capture value. Allen Zhang, President of Sateri said, “Being the world’s largest viscose producer gives us the advantages that come with volume, but value is what we hope differentiates us. By this, we don’t only mean higher value products like Lyocell or FinexTM but also the value we bring to communities, country, climate and customers.”

Globally, less than 1% of material used to produce clothing is recycled into new clothing. This presents a big opportunity for textile fibre recycling, particularly in China which is the largest textile producing country in the world. Last month, Sateri became a council member of the China Association of Circular Economy (CACE). The company will work closely with CACE’s Textile Waste Comprehensive Utilisation Committee to establish standards and promote industrial-scale textile waste recycling. Sateri is part of the Singapore-based RGE group of companies which has committed USD200 million into next-generation textile fibre innovation and technology.