From the Sector

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

A new cold chamber at its headquarters in Winterthur, Switzerland, enables Autoneum to optimize existing technologies as well as simulation and engineering services in vehicle thermal management and to adapt them to the changing thermal requirements of electric vehicles

The absence of heat from the internal combustion engine in electric vehicles as well as the impact of ambient temperature on the performance and lifetime of lithium-ion batteries are changing the requirements for vehicle thermal management. In addition, the energy from the battery is used not only to power the e-motor but also to thermally manage the battery itself and to warm and cool the car cabin by means of the heating, ventilation and air conditioning system. To increase the thermal comfort of the occupants and at the same time ensure optimum battery performance, save energy and thus increase the car’s range, manufacturers are placing increasing emphasis on efficient overall thermal management of the vehicle.

The chamber enables to test both occupants’ subjective perception of thermal comfort and the performance of components and entire vehicles under controlled temperature conditions of up to minus 20 degrees Celsius. It is thus a valuable addition to the existing testing and bench-marking facilities at the Company’s global research and development centers. The tests conducted in the chamber show how existing insulating components such as under battery shields, carpets and interior trim need to be optimized to further enhance the thermal management of the vehicle battery and cabin. The tests also provide valuable insights regarding the development and optimization of heated surfaces such as floor mats and door trim panels to improve thermal performance and driver comfort of electric vehicles.

• made out of recycled PET flakes and recyclable again
• suited for finishing recycled yarns and fabrics
• moisture management in sports and active wear

For the sustainable use of resources, the CHT Group has developed the product ARRISTAN rAIR, according to the principles of the circular economy. Here, plastic waste is converted into a valuable textile finishing product to achieve, for example, optimal moisture management in sports and active wear. Other areas of application include socks and tights in the clothing sector, filtration media and nonwovens in the technical textiles sector, and pillows and curtains in home textiles.

Since ARRISTAN rAIR is made out of recycled PET flakes, it is suited for finishing recycled yarns and fabrics which are subsequently recyclable again.

The hydrophilizing agent ARRISTAN rAIR is characterized by its fast-drying properties in combination with excellent soil release and thermoregulation. It therefore offers, especially in the field of functional textiles, optimal functionalities for high-quality and durable sportswear.

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 
Marking a spectacular comeback after the lockdown, the eighth edition of Techtextil India in  2021 stood out to be a ground-breaking business platform for the technical textile sector with live demonstrations from over 150 companies’ brands and an exclusive German pavilion. The high-profile event, over the course of three days attracted 4,087 trade visitors from 25 states and 194 cities. Mr Pramod Khosla, Director, Khosla Profil Pvt Ltd, shared: “Despite the unprecedented situation created by pandemic, Techtextil India 2021 saw a tremendous response from visitors. This goes to show the immense interest and trust that industries and people have in the technical textiles sector as well as in Techtextil India.”
 
For the upcoming ninth edition, leading Indian players such as Alok Masterbatches, Khosla Profil, Park Nonwoven, Sarex Chemicals, Suntech Geo, Weavetech have already confirmed their participation and will be showcasing innovations in high-growth application areas of Geotech, Packtech, Agrotech & Indutech with a focus on products such as specialty fibres, filtration fabrics, functional textiles & advance technology.
 
While Mobiltech, Indutech, Meditech, Packtech and Sportech constitute a major share value in the global market for technical textiles, the segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) in the Indian market are Oekotech, Protech, Mobiltech, Geotech, Indutech, Agrotech, Buildtech and Packtech. The government’s target to accelerate technical textile sector growth from 8% to 15-20% range in the next five years and transform the nation into a major player in innovations, technology development, applications in key areas (agriculture, roads and railways, water resources, hygiene and healthcare, personal protection) is giving strong impetus to industry players.

With an aim to place India as one of the leaders in the global technical textile market and enhance its adoption and penetration domestically, the Indian government has earmarked INR 1000 crore (USD 130.7 million) dedicated only for R&D of the Technical Textiles sector, while the Union Budget 2022-23 further allocates INR 100 crore (USD 13.07 million) for the National Technical Textiles Mission. The centre is making strong efforts to encourage the use and adoption of technical textiles and has mandated the use of 92 items by government organisations covering agriculture, horticulture, highways, railways, water resources, and medical applications. The organisers are in talks with international technology players targeting these application areas to present their innovations at the three-day fair.

According to the World Health Organization (WHO), cardiovascular disease is one of the most common natural causes of death. Every year, it is the cause of death of around 17 million people worldwide. The Peter Dornier Foundation Prize 2022 has now awarded a research work that is to improve the medical care of people with insufficient heart valve function in the future and prolong the patients' lives.

The human heart is a high-performance machine: over the course of a person's life, it beats almost three billion times, pumping around 200 million litres of blood through the body. Enormous stresses that can sometimes lead to life-threatening signs of wear and tear. If a heart valve gets out of step, patients usually get artificial-mechanical or biological valves as a replacement. However, mechanical solutions imply patients to take blood-thinning medication for the rest of their lives. In addition, there may be audible closing noises. For example, almost a quarter of patients with mechanical heart valves complain of sleep disturbances. Biological heart valves, on the other hand, such as those made from animal tissue, require a great deal of manual work and have a shorter lifetime.

Potential of weaving for medical products demonstrated
For this reason, Graduate Engineer Mathis Bruns at the Institute for Textile Machinery and High-Performance Textile Materials Technology (ITM) at the TU Dresden is researching an implant alternative made of fabric. As part of a research project that also involved heart surgeons from the Dresden Heart Centre and the University Hospital in Würzburg, Mr. Bruns provided important findings for weaving an artificial heart valve in his diploma thesis. For his work entitled "Development of tubular structures with integrated valve function", Mathis Bruns has now received the Peter Dornier Foundation Prize 2022, endowed with 5,000 euros. In his laudation, Dr. Adnan Wahhoud, former head of the development department of air-jet weaving machines at DORNIER in Lindau, said: "With his work, the winner of the award demonstrates very clearly the potential of weaving technology to produce fabrics of complex form, geometry and structure with the aim of prolonging and improving people's lives." The award-winning thesis enriches research into three-dimensional tissues for use in medicine.

Weaving replacement heart valves without seams
"A particular advantage of our approach is the integral production method", says foundation prize winner Mathis Bruns. “The geometry and function of a heart valve is that complex that woven heart valves could not be produced in this form previously. Through the combined use of a rigid rapier weaving machine with bobbin shield and a Jacquard machine, it is possible to weave the replacement heart valve in such a way that it no longer has be sewn together. Even the tubular structures for the blood vessels and the integrated valve function are ‘all of one piece’. Seams are always a weak point in textile medical products," Mr. Bruns adds. “Another advantage of the woven heart valve is the possibility to insert it by the help of minimally invasive surgery. Hence, the folded valve which is about the size of a tea light is to be pushed with a catheter via the bloodstream to the target position in the heart and unfolded there. The patient's chest and heart would then no longer have to be cut open”, explains prize winner Mr. Bruns.

Textile structure is similar to human tissue
A wide variety of medical products have always been produced on DORNIER weaving machines. Customers use them to produce fabrics for bandages, prostheses, blood filters and orthoses among other things. For Mathis Bruns, it is only evident that implants such as heart valves will more and more be woven on the machines from Lindau in the future. "Textile tissue is very similar to human tissue," he says. The human body consists largely of thread-like materials, just as a textile fabric is made up of thousands of individual threads. "Muscle fibres convey force impulses, nerve tracts send stimuli such as pain and brain cells convey information via thread-like dendrites and axons." Because of their ‘thread-like properties’, woven implants are therefore particularly suitable for medical applications.

David Herberg, Vice President Engi-neering EMEA at automotive supplier Adient, has been named Rising Star 2022 in the Engineering category by Automotive News Europe magazine.

Every year since 2010, Automotive News Europe has recognized talents in the European automotive industry for their outstanding careers and special achievements in the service of their company and the industry as a whole. To be eligible, candidates must have a minimum of ten years’ experience in the industry, speak at least two languages and be aged 45 years or younger at the time of the nomination.

"The 19 people we are honoring this year are special," said Luca Ciferri, Associate Publisher & Editor of Automotive News Europe. "They’ve made it to the top from a pool of more than 130 candidates, making this year's selection process the most competitive in the history of the award."

Herberg, graduate industrial engineer and aged 45, looks back at a career spanning more than ten years at Adient, a leading supplier of seating systems for the automotive industry. After several years at the management consultancy McKinsey and various management positions at Adient as well as its predecessor Johnson Controls, Herberg has been responsible for around 1,200 employees in the development of seat structures, trim and complete seating systems since May 2020.

EURATEX has just released its Spring report, offering a detailed insight into trade figures for the European textile and apparel industry in 2021. The numbers are encouraging: comparing with the dramatic corona-year 2020, EU exports of textile and clothing articles increased by +10.6%, while imports dipped by -7.5%. As a result, the EU trade deficit improved, even it remains significant (- €48 billion).

Furthermore, import prices went slightly down in clothing and dropped in textiles, following a strong decrease of Chinese import prices of face masks and protective medical supplies.

The boost in exports was mainly due to strong performance on the Swiss, Chinese and US markets. On the other side, EU sales of textile & clothing to the United Kingdom fell sharply (-23%), due to Brexit new requirements, customs’ delays and shortage of truck drivers.  Imports from the EU top supplier, China, plunged by -28%, corresponding to €13 billion. Similarly, textile and clothing imports from the United Kingdom recorded a sharp decrease over the period (-48%, equal to €-3 billion).

Director General Dirk Vantyghem commented: “the 2021 export figures, presented in this Spring report, confirm that EURATEX members have gained momentum; even if energy prices are causing some serious short-term disruptions, our long-term ambition remains to be a world leader on sustainable textiles.”

The international trade dimension is indeed critical for the competitiveness of the European textile ecosystem, and needs to be fully embedded in the EU’s Strategy for Sustainable and Circular Textiles. The Commission insists that “all textile products placed on the EU market, are durable, free of hazardous substances, produced respecting social standards…” This is an essential condition to create a level playing field between all textile and apparel companies, regardless of their production base. With €100 billion of imports, and over 20 billion of “foreign” textile items put on the Single Market, this requires a dramatic upscaling of market surveillance, without however disrupting fluid supply chains.

Looking at the impact of war in Ukraine, EURATEX has strongly condemned the Russian aggression, and offered support to the Ukrainian textile industry. Ukraine offers valuable sourcing opportunities for European textile and apparel brands, as part of a broader nearshoring trend, which seems to emerge from the trade figures.

• Natural fibers combined with bio-derived epoxy resins provide sustainable options for Industrial markets

Hexcel has developed a new product range that combines Hexcel resin systems made with bio-derived resin content with natural fiber reinforcements to create material solutions for Automotive, Winter Sports, Marine and Wind Energy applications.

HexPly Nature Range includes proven resins such as HexPly M49, M78.1-LT and M79 but with bio-derived epoxy resin content. The excellent resin characteristics remain unchanged in the new Nature Range products, maintaining high mechanical performance and consistent processing properties.
In addition, the HexPly Nature Range provides prepreg options with natural fiber reinforcements that can be seamlessly integrated into existing production processes.

Hexcel worked with TÜV Austria to provide independent, high-quality measurement and assessment of the bio-content of HexPly Nature Range products. TÜV Austria’s OK biobased certification uses a standardized measurement of the biobased carbon content enabling transparency and easy like-for-like comparison between products.

At JEC World in Paris on May 3-5, Hexcel presented an alpine ski produced by the Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature Range M78.1-LT UD flax fiber prepreg. In addition to providing a bio-based material solution, the natural fiber-reinforced prepreg also offers the potential to improve impact performance and vibration damping in the ski.

Claude Despierres, VP of Sales and Marketing – Industrial at Hexcel, said, “Our new HexPly Nature Range forms an important part of providing customers with biobased, TÜV-certified material options based on our established prepreg resin systems. Marine, winter sports, wind energy and automotive manufacturers can now have the choice to switch from petroleum-based material solutions to Hexcel HexPly Nature Range with no compromise in performance or process efficiency.”

• The first year of TECHNYL® in China under the DOMO brand name; DOMO will be pushing forward its expansion plan of high-performance polyamides in China
• Continued innovation in engineered nylon materials for a sustainable future

DOMO Chemicals announced a long-term investment plan in China to continue expanding its production capacity of TECHNYL® high-performance polyamides. This plan aims to meet growing demand in the automotive, electrical & electronics, and industrial consumer goods industries, and help build a sustainable future. DOMO Chemicals acquired Solvay's Performance Polyamides business in 2020 and has sold the TECHNYL® products globally since February 1, 2022, including in China, one of the company's key strategic markets.

The global demand for polyamide materials is currently booming at a CAGR of up to 3 percent. The adoption of new energy vehicles (including pure electric, hybrid and fuel cell vehicles) is expected to reach 45 percent globally by 2030, and automakers are increasingly using sustainable materials to make components, which are key growth drivers of the polyamide market. In addition, the demand for miniaturized circuit breakers, contactors, plug switches, and other components in the electrical and electronics and industrial consumer goods industries further opens up the application potential for polyamide materials.

DOMO Chemicals will continue to expand the capacity of its production site in Jiaxing, Zhejiang Province, which has been planned to be gradually introduced in three stages:

• Since March 2022, an additional 6,000 tons of capacity has been made available, with the plant achieving the total capacity of 14,000 tons of PA6 from April onwards.
• A 35,000-ton new plant in Haiyan is planned to be completed in the third quarter of 2023, in which DOMO Chemicals has invested more than 14 million euros (97 million yuan).
• Going forward, DOMO Chemicals will further expand the plant, gradually increasing its capacity to 50,000 tons.

In addition to the expansion, the plant will also use renewable energy wherever possible, adopt advanced water and air treatment technologies to reduce water consumption and CO2 emissions, and fully comply with Health, Safety and Environmental Management System (HSE) regulations. DOMO Chemicals will improve HSE compliance continuously and work closely with the local government, while partnering with key local and global customers to accelerate innovation and development across a wide range of industries.

TECHNYL® has been committed to helping customers improve their low-carbon competitiveness since its very first year in China. It allows OEMs and component makers in the automotive, electrical & electronics, and industrial consumer goods segments to create lightweight, durable, aesthetically pleasing, smart and environmentally-friendly products.

• Hypetex® to Showcase Coloured Carbon and Flax Fibre Solutions
• Hypetex, London, April 20 2022, Booth R52, Hall 6

Hypetex, the market leaders in colouring carbon and natural fibre materials, will demonstrate both the processing and sustainability benefits of its patented colourisation technology when it exhibits for the first time at JEC World 2022.

Exhibiting as part of the Composites UK stand (Booth R52), Hypetex will display its portfolio of uniquely coloured carbon fibre materials including 3K woven styles, ultra-lightweight spread tow fabrics, UD, and 3D materials. Hypetex will also present details of its latest eco-friendly coloured flax materials  which combine sustainably grown natural flax with sustainable colouring technologies. Hypetex patented colouring technology, available in an extensive palette of standard and bespoke colours and shades, can be applied to traditional woven fabric constructions, non-woven UDs, spread tow and bespoke fabric designs. The technology replaces a traditional coloured painted finish, providing an exceptional depth of colour to any composite part, improving thermal conductivity and reducing heat absorption ,whilst reducing the overall weight and processing time with no compromise to the mechanical performance of the composite structure.

By removing the need for painting, and the associated preparation steps, Hypetex technology provides manufacturers with a repeatable straight out of the mould coloured finish, that is not only easy to integrate into all composite processes, but also takes additional materials, consumables, and process time out of the component cost. As part of its continued commitment to leading the drive for more sustainable composite solutions, and its focus on improvements based on the ESG framework. Hypetex will also display its new range of coloured flax fibre textiles. The advanced colouring technology used protects the natural flax fibres throughout the high temperature processes required for composite production, avoiding burning or any discolouration issues common to natural fibres. In addition, Hypetex colouring solution is an ecofriendly sustainable alternative to traditional dyeing processes which are a significant cause of global water pollution.

The Hypetex team will be on hand throughout the show to provide additional details on Hypetex materials and their integration into the manufacturing process. Visitors to the Hypetex stand will be able see Hypetex carbon and flax products in raw fabric, and how its unique colour palette translates into the most distinctive finished moulded components. Hypetex partners SHD Composites, Textreme, Sigmatex and Angeloni will also have materials and components on display at JEC World 2022, including sporting equipment such as racquets, sticks, and skateboards, which highlight the massive range of processing options and potential applications for this novel technology. One such application, the adidas Kromaskin field hockey stick, with a unique Hypetex coloured Textreme spread tow carbon finish, will also be part of the JEC Innovation Planets feature.