From the Sector

Reset
2 results
Professor Dr.-Ing. Markus Milwich Photo: DITF
Professor Dr.-Ing. Markus Milwich.
19.03.2024

Markus Milwich represents "Lightweight Design Agency for Baden-Württemberg"

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

The use of lightweight materials in combination with new production technologies will significantly reduce energy consumption in transportation, the manufacturing industry and the construction sector. Resources can be saved through the use of new materials. As a cross-functional technology, lightweight construction covers entire value chain from production and use to recycling and reuse.

The aim of the state government is to establish Baden-Württemberg as a leading provider of innovative lightweight construction technologies in order to strengthen the local economy and secure high-quality jobs.

Among others, the "Lightweight Construction Alliance Baden-Württemberg" will continue the nationally renowned "Lightweight Construction Day", which acts as an important source of inspiration for a wide range of lightweight construction topics among business and scientific community.

Professor Milwich, an expert with many years of experience and an excellent network beyond the State's borders, has been recruited for this task. In his role, Milwich also represents the state of Baden-Württemberg on the Strategy Advisory Board of the Lightweight Construction Initiative of the Federal Ministry for Economic Affairs and Climate Action, which supports the cross functional-technology and efficient transfer of knowledge between the various nationwide players in lightweight construction and serves as a central point of contact for entrepreneurs nationwide for all relevant questions.

From 2005 to 2020, Professor Milwich headed the Composite Technology research at the DITF, which was integrated into the Competence Center Polymers and Fiber Composites in 2020. He is also an honorary professor at Reutlingen University, where he teaches hybrid materials and composites. "Lightweight design is an essential aspect for sustainability, environmental and resource conservation. I always showcase this in research and teaching and now also as a representative of the lightweight construction community in Baden-Württemberg," emphasizes Professor Milwich.

Source:

Deutsche Institute für Textil- und Faserforschung

Composites United stellt mit Roy Thyroff die Weichen für die Zukunft im Bau
Roy Thyroff
01.09.2020

Composites United stellt Roy Thyroff als Geschäftsführer vor

  • Gestärkt in die Zukunft der Faserverbundanwendungen im Bauwesen

Das Fachnetzwerk CU Bau des Composites United e.V. stellt für die Entwicklung zum internationalen Verband strategische Weichen. Für den Einsatz von faserverstärkten Werkstoffen im Bauwesen konnte der erfahrene und in der Branche gut vernetzte Textil-Beton-Visionär Roy Thyroff ab September 2020 als Geschäftsführer gewonnen werden.

Bis 2019 widmete sich der Technische Betriebswirt und Industriemeister Textil als Geschäftsführer dem Aufbau der V. Fraas Solutions in Textile GmbH, entwickelte u.a. Maschinen- und Anlagentechnologien für die Herstellung und Weiterverarbeitung von Technischen Textilien, Textilbewehrungen und Carbon-Bewehrungen. Seit Juni 2019 ist er mit der Firma rothycon entlang der gesamten textilen Wertschöpfungskette aktiv. Von 2012 bis 2019 war Roy Thyroff außerdem Verbandsgeschäftsführer des Tudalit e.V., bis er Ende Juni 2019 in den Vorstand gewählt wurde.

  • Gestärkt in die Zukunft der Faserverbundanwendungen im Bauwesen

Das Fachnetzwerk CU Bau des Composites United e.V. stellt für die Entwicklung zum internationalen Verband strategische Weichen. Für den Einsatz von faserverstärkten Werkstoffen im Bauwesen konnte der erfahrene und in der Branche gut vernetzte Textil-Beton-Visionär Roy Thyroff ab September 2020 als Geschäftsführer gewonnen werden.

Bis 2019 widmete sich der Technische Betriebswirt und Industriemeister Textil als Geschäftsführer dem Aufbau der V. Fraas Solutions in Textile GmbH, entwickelte u.a. Maschinen- und Anlagentechnologien für die Herstellung und Weiterverarbeitung von Technischen Textilien, Textilbewehrungen und Carbon-Bewehrungen. Seit Juni 2019 ist er mit der Firma rothycon entlang der gesamten textilen Wertschöpfungskette aktiv. Von 2012 bis 2019 war Roy Thyroff außerdem Verbandsgeschäftsführer des Tudalit e.V., bis er Ende Juni 2019 in den Vorstand gewählt wurde.

CU Bau agiert für das Ziel, die gesamte Bauwirtschaft – von Bauherren über Architekten und Planern bis hin zu Zulassungsstellen sowie Bauunternehmen – mit Informationen und gut aufbereitetem, praxisorientiertem Wissen zu Bauprodukten mit faserverstärkter Beton- und Polymermatrix zu versorgen. Damit diese optimal, materialgerecht und mit entsprechenden Zulassungen einsetzt werden können. Schon heute treibt der CU Bau als überregionales Fachnetzwerk des international vernetzten Composites United e.V. für die ca. 400 Mitglieder aus Industrie und Wissenschaft die Akzeptanz und den flächendeckenden Einsatz von faserverstärkten Werkstoffen im Bauwesen voran.

Source:

bm CONSULTING Communication & PR