From the Sector

Reset
49 results
05.02.2025

Euratex welcomes coordinated action against Shein

The European Commission’s communication on e-commerce - adopted by the college of Commissioner’s today- rightly acknowledges the growing challenges posed by the surge of direct-to-consumer imports, particularly through online marketplaces. Non-compliant and unsafe products undermine consumer safety, environmental sustainability, and the competitiveness of law-abiding businesses. The urgency of this issue is underscored by findings from the REACH for textiles project, which revealed that 16% of 400 tested products failed to comply with EU legislation. These figures highlight the critical need for stronger enforcement measures to prevent unsafe products from reaching EU consumers.

The European Commission’s communication on e-commerce - adopted by the college of Commissioner’s today- rightly acknowledges the growing challenges posed by the surge of direct-to-consumer imports, particularly through online marketplaces. Non-compliant and unsafe products undermine consumer safety, environmental sustainability, and the competitiveness of law-abiding businesses. The urgency of this issue is underscored by findings from the REACH for textiles project, which revealed that 16% of 400 tested products failed to comply with EU legislation. These figures highlight the critical need for stronger enforcement measures to prevent unsafe products from reaching EU consumers.

To address these concerns, enforcement of the Digital Services Act (DSA) and the Digital Market Act (DMA) must be strengthened, ensuring that e-commerce platforms assume legal responsibilities for the products they offer as well as fair competition in the single market is guaranteed. Additionally, the removal of the de minimis rule and frontloading parts of the Customs Code reform is critical to rapidly closing loopholes that allow non-compliant goods to enter the EU market unchecked. Enhanced coordination with Member States and industry stakeholders can increase the effectiveness of our enforcement efforts. Investment in digital tools such as the Digital Product Passport is essential to increase transparency, safeguard fair trade practices, and reinforce consumer trust.

EURATEX welcomes the Commission's decision to take coordinated action, together with the Consumer Protection Cooperation Network, against Shein. The association is also pleased to collaborate on a Digital Fairness Act to strengthen consumer protection in the digital sphere.

EURATEX fully supports the Commission’s commitment to stricter enforcement and urges immediate implementation of these measures to create a level playing field and ensure a safe, sustainable, and competitive e-commerce environment. Director General Dirk Vantyghem concluded: “With billions of garments entering the EU every year, we simply need a more solid system to monitor compliance of these products. EURATEX is looking forward to working together with the European Commission to achieve these important goals.”

International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector (c) ITMF International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector
02.01.2025

ITMF: Slight capacity growth and lower fibre consumption in 2023

The International Textile Manufacturer Federation has published its International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector in virtually all textile-producing countries in the world. ITMF has used a new calculation method and reviewed past time series.

The estimated global number of installed short-staple spindles reached 232 Mio units in 2023 and the number of installed open-end rotors grew to 9.7 Mio (see Fig. 1 and 2). Capacity building is still disproportionally targeting Asia. The number of installed air-jet spindles soared to 637 thousand. Outside Asia, the main capacity increase was registered in Türkiye.

The International Textile Manufacturer Federation has published its International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector in virtually all textile-producing countries in the world. ITMF has used a new calculation method and reviewed past time series.

The estimated global number of installed short-staple spindles reached 232 Mio units in 2023 and the number of installed open-end rotors grew to 9.7 Mio (see Fig. 1 and 2). Capacity building is still disproportionally targeting Asia. The number of installed air-jet spindles soared to 637 thousand. Outside Asia, the main capacity increase was registered in Türkiye.

Global Installed Capacities and Raw Material Consumption in the Short-Staple Organized (Spinning Mill-) Sector of the Textile Industries (1993-2023) The number of installed shuttle-less looms increased to 1.7 Mio in 2023 (see Fig. 3). Total raw material consumption in the short-staple organized sector slightly decreased to 43 Mio tons (see Fig. 4). Global consumption of raw cotton and cellulosic short-staple fibers decreased by -4.4% and -2.9%, respectively. Consumption of synthetic short-staple fibers increased by 0.5%.

Source:

ITMF International Textile Manufacturer Federation

StichTogether Nation Seminar Poland Photo Euratex
10.12.2024

StichTogether Nation Seminar Poland

The StitchTogether National Seminar in Poland delivers the Warsaw Declaration to enhance social dialogue for the Polish textile industry

On 6 December 2024, social partners from the Polish textiles industry adopted the Warsaw Declaration, a joint commitment to work on the competitiveness of their industry. The declaration is the outcome of a 2 day meeting, organised under the EU co-funded StitchTogether project, which aims at promoting social partnerships in the European Textiles and Clothing Industry. The meeting in Warsaw brought together representatives of the Polish textile industry, including employer associations, trade unions, education institutes and the government to discuss the future of the industry.

The StitchTogether National Seminar in Poland delivers the Warsaw Declaration to enhance social dialogue for the Polish textile industry

On 6 December 2024, social partners from the Polish textiles industry adopted the Warsaw Declaration, a joint commitment to work on the competitiveness of their industry. The declaration is the outcome of a 2 day meeting, organised under the EU co-funded StitchTogether project, which aims at promoting social partnerships in the European Textiles and Clothing Industry. The meeting in Warsaw brought together representatives of the Polish textile industry, including employer associations, trade unions, education institutes and the government to discuss the future of the industry.

Poland has a long and proud tradition in textiles and clothing manufacturing, with 130,000 people employed in the sector, and 20,000 companies of which the vast majority are SMEs. But the sector is struggling due to tough global competition and price pressures. In this context, the Polish textile and clothing social partners are united in ensuring the sector can successful face the digital and green transition, while remaining competitive and resilient, with decent jobs for all.

The Warsaw Declaration includes a series of priorities, confirming social partners’ commitment in working together, but asking support of the Polish government to upgrade industrial strategies, making the textile industry more attractive with a qualified and trained workforce.

“In times of transition social dialogue is more vital than ever, employers and trade unions need to work together to anticipate the change and prepare for the future in this case to more sustainable textiles and clothing production in Poland. It is essential that the transition is a Just Transition that leaves no worker behind, and we want the transition to safeguard jobs in the sector and create new jobs, which must be decent jobs with decent pay. The transition requires support and we call on the Polish government to work with the social partners for a new sectoral industrial policy to support the sector and good industrial jobs,’’ says Judith Kirton-Darling, IndustriAll Europe's general secretary.

Dirk Vantyghem, EURATEX Director General, stressed that “the incoming Polish presidency of the EU is a unique opportunity to shape a Clean Industrial Deal that will strengthen the competitiveness of our companies. As our Polish textile companies clearly expressed during the event, they want to see changes on the energy costs and fair competition, instead of adding new regulations.”

Source:

Euratex

Graphic Hygienix
02.12.2024

Hiro Technologies, Inc. wins 2024 Hygienix Innovation Award™

INDA brought together hundreds of industry leaders to explore advancements in the absorbent hygiene and personal care markets during the 10th annual Hygienix™ event, held Nov. 18-21 at the Renaissance Nashville Hotel.

Themed Driving Absorbent Hygiene Product Innovation: Consumer Desires, Market Dynamics & Sustainability Solutions, key sessions included pricing strategies, global trade impacts, FemTech, adult care, period poverty, emerging pet care and wound care markets, environmental regulations on plastics and PFAS, and the impact of aging societies.

An event highlight was the presentation of the 2024 Hygienix Innovation Award® to: HIRO Technologies, Inc.’s World’s First MycoDigestable Diapers, diapers featuring plastic-eating mushrooms that combine excellent absorbency with natural materials.

The other finalists were:

INDA brought together hundreds of industry leaders to explore advancements in the absorbent hygiene and personal care markets during the 10th annual Hygienix™ event, held Nov. 18-21 at the Renaissance Nashville Hotel.

Themed Driving Absorbent Hygiene Product Innovation: Consumer Desires, Market Dynamics & Sustainability Solutions, key sessions included pricing strategies, global trade impacts, FemTech, adult care, period poverty, emerging pet care and wound care markets, environmental regulations on plastics and PFAS, and the impact of aging societies.

An event highlight was the presentation of the 2024 Hygienix Innovation Award® to: HIRO Technologies, Inc.’s World’s First MycoDigestable Diapers, diapers featuring plastic-eating mushrooms that combine excellent absorbency with natural materials.

The other finalists were:

  • Harper HYGIENICS S.A.’s Cleanic Naturals Hemp Sanitary Pads (Day & Night) and Pantyliners, an innovative femcare line made with regenerative hemp fibers from Bast Fibre Technologies.
  • Hello Hazel, Inc.’s High & Dry Briefs, the first and only disposable briefs for leaks designed to look, fit, and feel like real underwear.

Hygienix Highlights
Attendees gained insights and knowledge during three hands-on training sessions on Nov. 18, focused on fundamentals of absorption systems and opportunities in adult incontinence, innovations in menstrual care, and baby and infant care market dynamics.

Hygienix kicked off with a welcome reception that fostered networking. Attendees explored emerging trends and product innovations through Lightning Talks, connected with successful hygiene start-ups during Lunch Around sessions, and discovered the latest offerings at tabletop exhibits.

“Hygienix exemplifies INDA’s commitment to empowering companies in the absorbent hygiene and personal care markets to advance their businesses,” said INDA President Tony Fragnito. “The insights and connections made at this year’s event will drive growth and enable participants to meet evolving demands and market challenges.”    

INDA announced Hygienix 2025 will be held Nov. 17-20 at Omni Amelia Island Resort, Fernandina Beach, Florida.

Source:

INDA

08.11.2024

EDANA hosts Sustainability Forum 2024: Pathways to a Greener Future

EDANA, the global association for the nonwovens and related industries, concluded its annual Sustainability Forum at the KBR Royal Library of Belgium in Brussels. This year's forum, themed “Building a Sustainable Future Together,” featured a series of keynote addresses, panel discussions, and collaborative sessions focused on environmental responsibility, corporate social responsibility, and circular economy innovations within the nonwovens sector. With an agenda that bridged policy and practice, the Forum highlighted the latest advancements and strategies aimed at tackling climate change, reducing waste, and enhancing sustainability practices.

EDANA, the global association for the nonwovens and related industries, concluded its annual Sustainability Forum at the KBR Royal Library of Belgium in Brussels. This year's forum, themed “Building a Sustainable Future Together,” featured a series of keynote addresses, panel discussions, and collaborative sessions focused on environmental responsibility, corporate social responsibility, and circular economy innovations within the nonwovens sector. With an agenda that bridged policy and practice, the Forum highlighted the latest advancements and strategies aimed at tackling climate change, reducing waste, and enhancing sustainability practices.

Keynote Highlights
The forum featured two keynote speakers: Ana Rovzar, Founder of Polygon AR, opened the Forum with a keynote on the accelerating transition to clean energy. In her speech, she discussed the shift from conventional energy investments to renewables, noting a 50% growth in renewables in 2023 alone. “It is accelerating much faster than people think” she remarked, emphasizing that “real progress requires a united front from governments, businesses, and communities to remove regulatory and technological barriers”.

In another keynote, sustainability expert Mike Barry, formerly of Marks & Spencer, stressed the importance of aligning corporate strategy with sustainability. “Citizens see climate change as a top priority, and companies must act boldly to reduce emissions, especially Scope 3”, he said. “Sustainability is now a vital part of brand identity, and consumers expect more transparency and commitment than ever”.

Innovative Industry Perspectives and EU Policy Impacts
Brieuc Lits, Public Affairs Director at EDANA, examined the potential effects of the EU Green Deal on the nonwovens industry. “The EU’s shift towards balancing sustainability with competitiveness will shape not only policy but the very framework within which we operate”, he noted, emphasizing that the sector must adapt to stay competitive and aligned with regulatory expectations.

Lastly, Paolo Haeusermann, Senior Brand Director and Europe Sustainability Leader at Procter & Gamble, shared insights on advancing sustainability in absorbent hygiene products and emphasized the importance of these items. “We are talking about essential products in people’s lives”, he remarked.

Corporate and Product Sustainability: A Deep Dive
Several industry leaders shared insights on integrating sustainability at every level of business. Carsten Ruff from Nitto Advanced Film Solutions discussed the challenges and strategies of embedding sustainability in corporate culture, particularly in a multinational setting. “Sustainability is not a contradiction to industrial applications; it’s a powerful driver of innovation”, he observed.

Martijn Gipmans from Sphera Solutions highlighted the business value of transparency and life-cycle assessments (LCA). “LCA and transparent ESG reporting can catalyse both business growth and environmental progress”, he explained, stressing the importance of integrated sustainability assessments to reduce the carbon footprint of entire product portfolios.

Christophe Morel-Fourrier, Sustainability Leader for Hygiene, Packaging, and Converting Adhesives at Bostik, introduced the Archimedes tool as a strategic asset for Portfolio Sustainability Assessment. “Archimedes allows us to make transparent, informed decisions that align with our long-term sustainability goals”, he explained. He highlighted that this tool helps companies evaluate the sustainability of their product portfolios, empowering them to make impactful choices that support environmental goals.

The Path Forward: Advancing Circularity and Green Innovation
One of the most discussed topics was the industry's transition toward a circular economy. Albert Hammerschmied from Freudenberg Performance Materials highlighted the importance of post-industrial waste in achieving circularity, particularly in the automotive sector. “The potential for nonwovens in the automotive circular economy is vast, but requires industry-wide collaboration”, he commented.

In a session addressing the future of sustainable practices in building insulation, Alexandre Butté of ANDRITZ Laroche emphasized the importance of sustainable materials and collaboration among stakeholders. “The building industry faces unique sustainability challenges, but with innovation and eco-friendly materials, we can bridge the gap between goals and achievable practices”, he said.

Building a Sustainable Health Sector
Danielle van Horzen, Global Marketing Manager for Hygiene and Healthcare at SABIC, discussed advanced recycling solutions in the healthcare sector. Addressing the challenges of medical waste recycling, she stated, “A significant amount of medical waste is not contaminated, offering us opportunities to create circularity in healthcare.” She pointed to the potential for advanced chemical recycling to enable circular models, helping to tackle the pressing issue of sustainable medical waste management.

The day concluded with a session on the circular potential within healthcare. Kristien Depraetere, Sustainability Coordinator at UZ Leuven, outlined sustainable practices in hospitals, from waste reduction to advanced recycling in medical waste. “Healthcare can lead by example in the transition to circularity, yet we need practical and legislative support to address unique industry challenges”.

Visit to the European Commission
The third day of EDANA’s Sustainability Forum 2024 concluded with an insightful visit to the European Commission, offering attendees a unique opportunity to engage directly with policymakers and gain firsthand insights into the EU's sustainability agenda. Hosted at the Charlemagne Building, discussions centered on pivotal elements of the EU Green Deal, including the establishment of Extended Producer Responsibility (EPR), the scope and implementation of the Single-Use Plastics Directive (SUPD), and the Ecodesign for Sustainable Products Regulation.

Featuring presentations from prominent EU officials like Vicenzo Gente and Werner Bosmans, attendees delved into how these regulations are shaping sustainability strategies across industries. Bridging policy and practice emerged as essential, reinforcing the forum’s dedication to aligning industry actions with current EU regulatory frameworks. The session offered a strong conclusion to the event, reinforcing a shared commitment to a sustainable future in collaboration with EU leaders and regulatory bodies.

More information:
Edana nonwovens green materials
Source:

EDANA

EURATEX and AMITH sign Memorandum of Understanding Image: Euratex
08.11.2024

MoU: EURATEX and AMITH strengthen Euro-Mediterranean partnership

EURATEX (the European Apparel and Textile Confederation) and AMITH (Association Marocaine des Industries du Textile et de l'Habillement) signed a Memorandum of Understanding (MoU) during the 21st edition of Maroc in Mode (MIM 2024) in Casablanca. This MoU aims to foster deeper collaboration and mutual growth within the European and Moroccan textile and clothing (T&C) industries.

The MoU underscores shared priorities, including aligning industry practices with European sustainability and circularity standards, addressing customs and regulatory challenges, and strengthening the investment and business climate between the two regions. The agreement highlights EURATEX and AMITH’s commitment to advancing competitiveness in the global textile market, supporting a seamless and cohesive approach to trade under the revised rules of the Pan Euro Med Convention, which enter into force on 1 January 2025.

EURATEX (the European Apparel and Textile Confederation) and AMITH (Association Marocaine des Industries du Textile et de l'Habillement) signed a Memorandum of Understanding (MoU) during the 21st edition of Maroc in Mode (MIM 2024) in Casablanca. This MoU aims to foster deeper collaboration and mutual growth within the European and Moroccan textile and clothing (T&C) industries.

The MoU underscores shared priorities, including aligning industry practices with European sustainability and circularity standards, addressing customs and regulatory challenges, and strengthening the investment and business climate between the two regions. The agreement highlights EURATEX and AMITH’s commitment to advancing competitiveness in the global textile market, supporting a seamless and cohesive approach to trade under the revised rules of the Pan Euro Med Convention, which enter into force on 1 January 2025.

This partnership also opens new avenues for information exchange on industrial technology, cross-border business initiatives, and collaborative skill development projects. By enhancing cooperation in these areas, EURATEX and AMITH are working to create a sustainable, resilient, and globally competitive Euro-Mediterranean textile industry.

"The EU-Morocco textile connection has vast untapped potential," said Mario Jorge Machado, EURATEX President. "Through our collaboration with AMITH, we aim to fortify both regions' textile sectors, embracing sustainability and competitiveness as core values. This MoU is a meaningful step toward our shared vision of a thriving Euro-Mediterranean textile ecosystem."

„This Memorandum of Understanding is important for AMITH as it will help achieving our mission: drive the continuous development of the Moroccan industry and help companies rise to new levels of excellence and sustainability” commented El Ansari Anass, AMITH President.

15.10.2024

The Italian Textile Machinery Industry at ITMA ASIA + CITME 2024

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting Countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover, China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting Countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover, China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

“We hope that the recovery of the Chinese market, observed in this first half of the year, may be an early indication of a more general upturn in global demand for machinery,” says ACIMIT President Marco Salvadè. Over the past few years, demand from Chinese companies has turned to technologies that combine savings in production costs and environmental friendliness, as also demanded by brands and end consumers. “Today, Italian manufacturers can offer highly customized solutions that are particularly suited to making textile production more sustainable,” confirms Salvadè. “The Chinese textile machinery market is rapidly evolving, and the level of innovation in the technology requested has risen due to the growing international competition that even Chinese companies face. In Shanghai, Italian manufacturers will display their latest innovations, essential for making textile production more efficient and sustainable.”

 

Source:

Association of Italian Textile Machinery Manufacturers

VDMA Press Conference ITMA ASIA 2024 VDMA Textile Machinery
VDMA Press Conference ITMA ASIA 2024
14.10.2024

Smart technologies for green textile production at ITMA ASIA + CITME 2024

With 42 exhibiting member companies, ITMA ASIA + CITME 2024 is once again marked by a strong presence of VDMA companies. They cover nearly all different machinery chapters with a focus on spinning and man-made fibers, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material.
In total, the German participation at the fair is the largest from outside China.

The VDMA team in Shanghai is staffed again with colleagues from the VDMA headquarters in Germany as well as from VDMA China. With these joined forces, the team is well prepared to support the exhibiting member companies on site.

With 42 exhibiting member companies, ITMA ASIA + CITME 2024 is once again marked by a strong presence of VDMA companies. They cover nearly all different machinery chapters with a focus on spinning and man-made fibers, nonwovens, weaving, braiding, knitting & warp knitting, finishing & dyeing as well as technologies for textile recycling and processing of recycled material.
In total, the German participation at the fair is the largest from outside China.

The VDMA team in Shanghai is staffed again with colleagues from the VDMA headquarters in Germany as well as from VDMA China. With these joined forces, the team is well prepared to support the exhibiting member companies on site.

Dr. Harald Weber, Managing Director VDMA Textile Machinery Association, summarised: “Although facing a difficult market situation, this year’s ITMA ASIA is an essential showcase for the member companies of the VDMA Textile Machinery Association. There is definitely no shortage of chances and opportunities in China and other Asian markets. The exhibiting members will demonstrate their smart technologies that can pave the way to a green textile production and are looking forward to welcoming numerous visitors from various countries to their booths in Shanghai.”

China is aiming at a green and low CO2 development of its textile industry. At a press conference on the first day of ITMA ASIA + CITME, Georg Stausberg, member of the board of VDMA Textile Machinery and CEO of the Oerlikon Polymer Processing Solutions Division said: “Topics, such as energy efficiency and the careful use of resources have become increasingly important for Asian customers in recent years, not least due to stricter legal framework conditions. VDMA members and their technologies are the right partners on the road to a greener and low CO2 textile production.”
 
Export performance
Already in 2023, the global textile machinery exports decreased by 18.6 % compared to 2022. This was a challenge all major textile machinery producing countries had to face. However, the German exports remained relatively strong and only declined by 3.4 % in 2023. 2024 did not see a change in the global textile industry and thus the German exports have now also dropped significantly. Between January and July 2024, German exports of textile machinery and accessories summed up to 1.2 billion € (2023: 1.6 billion €). The shipping to almost all major markets decreased between January and July: China: 242 million € (2023: 384 million €), Turkey: 140 million € (2023: 180 million €), USA: 118 million € (2023: 152 million €), India: 100 million € (2023: 153 million €).

Sales opportunities in Asia
An economic survey of VDMA in September, to which 20 textile machinery companies replied, reflects the global challenging situation. Around 36 % assessed their current business situation as satisfactory, 54 % said it was bad. Only very few companies expect the global situation to improve in the next six months.

However, looking at the sales opportunities by regions/countries in Asia, most of the responding companies expect a better business situation in the Asian markets except China in six months. The business situation is expected to be on a satisfactory level then. With regard to this, a presence at ITMA ASIA in Shanghai and next year in Singapore is important for VDMA members to continuously show their innovations and to keep contact with the customers in Asia.

Source:

VDMA Textile Machinery

OUTLOOK24 Conference Photo Edana
01.10.2024

OUTLOOK24: Successful conference and exhibition

OUTLOOK™ 2024 took place on 24-26 September 2024 in Rome, gathering a record of 549 delegates from 212 companies and 37 countries across the nonwovens personal care, hygiene & wipes products value chain.

OUTLOOK24 Conference
The conference, structured across five key sessions, featured 26 speakers covering a diverse array of critical topics impacting not only the nonwovens industry but society at large. These topics included cutting-edge innovations and eco-design, evolving market dynamics, navigating new EU regulations, the future of absorbent hygiene products, sustainability, retail strategies, and the challenges posed by China's influence on European commerce.

The event's first day opened with a compelling presentation by Joachim De Vos, Managing Partner and Founder of Living Tomorrow & TomorrowLab. As an expert in strategic innovation and scenario planning, he shared valuable insights on guiding organizations towards future-readiness. He highlighted the emerging success factors, emphasizing how Generative AI can be leveraged to develop scenarios for the nonwovens industry, serving as a powerful roadmap for future innovation.

OUTLOOK™ 2024 took place on 24-26 September 2024 in Rome, gathering a record of 549 delegates from 212 companies and 37 countries across the nonwovens personal care, hygiene & wipes products value chain.

OUTLOOK24 Conference
The conference, structured across five key sessions, featured 26 speakers covering a diverse array of critical topics impacting not only the nonwovens industry but society at large. These topics included cutting-edge innovations and eco-design, evolving market dynamics, navigating new EU regulations, the future of absorbent hygiene products, sustainability, retail strategies, and the challenges posed by China's influence on European commerce.

The event's first day opened with a compelling presentation by Joachim De Vos, Managing Partner and Founder of Living Tomorrow & TomorrowLab. As an expert in strategic innovation and scenario planning, he shared valuable insights on guiding organizations towards future-readiness. He highlighted the emerging success factors, emphasizing how Generative AI can be leveraged to develop scenarios for the nonwovens industry, serving as a powerful roadmap for future innovation.

On the second day, James Kynge, the Europe-China correspondent for the Financial Times, delivered a keynote address., "The China Challenge", emphasizing China's rapid rise as a global tech superpower, noting that the country produced more than half of the world's robots last year. He explored the far-reaching impact of this growth on European commerce, highlighting the challenges and outlined strategies for European companies.

The final day of OUTLOOK™ Jack Stratten, Director of Insider Trends. highlighted in his presentation, “The polarization of choice: How retailers and brands are responding to market and product saturation,” in an unprecedented market saturation that leaves 64% of consumers feeling overwhelmed by choices. He discussed how massive retail platforms drive product saturation, influencing both quality and variety and concluded that differentiation in this crowded landscape occurs by focusing on high-quality, curated selections.

OUTLOOK24 Exhibition
As part of its commitment to fostering connections within the industry, OUTLOOK™ 2024 continued its tradition of offering extensive networking opportunities to its delegates. This year’s event featured a tabletop exhibition, where 20 companies had the chance to showcase their expertise over the 3 days.

The next edition of OUTLOOK™ will take place from 23-25 September 2025, in Budapest, Hungary at the Marriott Hotel, Budapest.

 

More information:
Edana outlook nonwovens
Source:

Edana

INDA and EDANA signing LOI Photo EDANA
Tony Fragnito - President & CEO of INDA; Mark Thornton - Chair of the INDA Board of Directors; Murat Dogru - General Manager of EDANA; Mikael Staal Axelsen, Chair EDANA Board of Governors
24.09.2024

INDA and EDANA: LOI to explore strategic alliance

INDA, the Association of the Nonwovens Industry, based in Cary, North Carolina, and EDANA, the Voice of Nonwovens, headquartered in Brussels, Belgium, have announced the signing of a Letter of Intent (LOI) in Rome to explore a strategic alliance. This marks a significant step toward leveraging their combined expertise and resources to address global challenges and drive new opportunities in the nonwovens industry.

As the nonwovens industry evolves, both associations recognize the need for a unified approach to navigate complex international markets. The potential alliance aims to deliver several key benefits:

INDA, the Association of the Nonwovens Industry, based in Cary, North Carolina, and EDANA, the Voice of Nonwovens, headquartered in Brussels, Belgium, have announced the signing of a Letter of Intent (LOI) in Rome to explore a strategic alliance. This marks a significant step toward leveraging their combined expertise and resources to address global challenges and drive new opportunities in the nonwovens industry.

As the nonwovens industry evolves, both associations recognize the need for a unified approach to navigate complex international markets. The potential alliance aims to deliver several key benefits:

  1. Enhance the scope and value to Members: The increased integration of resources will enable both organizations to deliver greater value to members, offering an expanded range of educational programs, enhanced networking opportunities, and access to a wider breadth of industry insights.
  2. Joint Advocacy and Representation: The alliance will amplify both organizations' collective voice, enhancing their ability to advocate for members' interests at local, regional, and global levels, ensuring that their needs and concerns are effectively addressed.
  3. Operational Synergies: The alliance will create efficiencies, strengthen the collective talent pool, and optimize the use of financial resources to better support member and industry initiatives.
  4. Innovation and Growth: The alliance will drive joint initiatives and projects that foster innovation, enhance industry leadership, and support the long-term growth and sustainability of the nonwovens industry.

The organizations will conduct a thorough due diligence process over the coming months to evaluate the strategic benefits and operational efficiencies of a potential alliance. Both associations remain dedicated to advancing their members’ interests and exploring new growth avenues within the nonwovens industry.

“This Letter of Intent underscores our commitment in exploring how we can better serve the nonwovens community and tackle industry’s evolving challenges,” said Murat Dogru, General Manager of EDANA. “Our purpose is to ensure that our members are well-positioned to thrive in a dynamic global environment. Reflecting on the Treaty of Rome signed decades ago, we hope that the signing of this Letter of Intent in Rome will pave the way for even greater achievements.”

INDA President & CEO Tony Fragnito added, “This potential alliance represents an opportunity to combine our strengths while openly engaging on the global issues affecting the industry. Better coordination will enhance our ability to serve the industry and our members while retaining our regionally focused support and representation.”

More information:
INDA Edana Alliance
Source:

EDANA

12.08.2024

VDMA members at CAITME

About 25 VDMA members will participate at CAITME, taking place from 11 to 14 September in Tashkent, Uzbekistan. Among the VDMA companies present at the trade fair with their own booth or through agents, 13 companies will be exhibiting in the area of the official German Pavilion, organised by the German Federal Ministry for Economic Affairs and Climate Action and initiated by VDMA: Brückner Textile Technologies, Erbatech, Georg Sahm, Groz-Beckert, Heusch, KARL MAYER STOLL Textilmaschinenfabrik, KURIS Spezialmaschinen, Lindauer DORNIER, Oerlikon Textile, Stäubli Bayreuth, STC Spinnzwirn, THIES, Xetma Vollenweider.

About 25 VDMA members will participate at CAITME, taking place from 11 to 14 September in Tashkent, Uzbekistan. Among the VDMA companies present at the trade fair with their own booth or through agents, 13 companies will be exhibiting in the area of the official German Pavilion, organised by the German Federal Ministry for Economic Affairs and Climate Action and initiated by VDMA: Brückner Textile Technologies, Erbatech, Georg Sahm, Groz-Beckert, Heusch, KARL MAYER STOLL Textilmaschinenfabrik, KURIS Spezialmaschinen, Lindauer DORNIER, Oerlikon Textile, Stäubli Bayreuth, STC Spinnzwirn, THIES, Xetma Vollenweider.

With exports of textile machinery and accessories worth 85 million euros in 2023, Germany was once again the second biggest supplier to the Uzbek textile sector, surpassed only by China. Uzbekistan is one of the largest producers and exporters of cotton. In the cotton sector, Uzbekistan already has a fully integrated production chain. Almost the entire cotton fibre is spun in the country. The Uzbek government has pushed ahead with extensive economic reforms in recent years. The textile industry is one of the top investment sectors in the manufacturing industry. Besides cotton spinning, the textile sector is enlarging its capacities in the downstream production steps of the textile chain, such as fabric making, finishing and dyeing.

Source:

VDMA

EURATEX elects new President (c) EURATEX
From the left: Ismail Kolunsag, Barbara Cimmino, Mario Jorge Machado and Grégory Marchant.
17.06.2024

EURATEX elects new President

Portuguese textile entrepreneur, Mario Jorge Machado, has been elected President of EURATEX during its General Assembly on 14 June. The Assembly also nominated Alberto Paccanelli as Honorary President.

Mario Jorge Machado has an extensive career in textiles. Mario is currently a shareholder and director of "Adalberto Textile Solutions, S.A.", where he applies advanced management practices to boost competitiveness and innovation. He has been president of the Textile and Clothing Association of Portugal (ATP) since 2019, and he stands out for his strategic leadership in the textile and clothing sector, promoting innovation and sustainability. He represents ATP on the Board of CIP - Confederação Empresarial de Portugal and chairs CIP's strategic council for the environment and sustainability.

With a degree in Production Polymer Engineering from the University of Minho, his expertise ranges from continuous process improvement to the development of B2B commercial teams and B2C business models. His vision encompasses operational excellence and the implementation of sustainable practices, contributing to the evolution of the textile industry.

Portuguese textile entrepreneur, Mario Jorge Machado, has been elected President of EURATEX during its General Assembly on 14 June. The Assembly also nominated Alberto Paccanelli as Honorary President.

Mario Jorge Machado has an extensive career in textiles. Mario is currently a shareholder and director of "Adalberto Textile Solutions, S.A.", where he applies advanced management practices to boost competitiveness and innovation. He has been president of the Textile and Clothing Association of Portugal (ATP) since 2019, and he stands out for his strategic leadership in the textile and clothing sector, promoting innovation and sustainability. He represents ATP on the Board of CIP - Confederação Empresarial de Portugal and chairs CIP's strategic council for the environment and sustainability.

With a degree in Production Polymer Engineering from the University of Minho, his expertise ranges from continuous process improvement to the development of B2B commercial teams and B2C business models. His vision encompasses operational excellence and the implementation of sustainable practices, contributing to the evolution of the textile industry.

The Assembly also nominated Alberto Paccanelli as Honorary President, recognising over a decade of commitment to EURATEX and the European textile industry.

EURATEX General Assembly also elected 4 other members of the Presidency Team: Michael Kamm (ZWILLING Gruppe, Germany), Barbara Cimmino (Yamamay, Italy), Grégory Marchant (UTT, France) and Ismail Kolunsag (Cross Tekstil, Turkey). During the Assembly, EURATEX also welcomed new memberships from CEMATEX and Forschungskuratorium Textil e. V., and a partnership with Reju. (France).

More information:
Euratex President general assembly
Source:

EURATEX

24.05.2024

Fashion for Good: Sorting for Circularity USA report

Fashion for Good launches the Sorting for Circularity USA report unveiling significant findings from the project. A first of its kind in the US, the report delves into consumer disposal behaviour, textile waste composition, and the potential for fibre-to-fibre recycling within the country. It provides insights for making informed decisions for further investments, infrastructure development and the next steps towards circularity.

The U.S. Textile Waste Landscape
The United States is a global leader in textile consumption and waste generation, positioning itself as one of the largest sources of secondary raw materials for post-consumer textile feedstock. Despite this, only 15% of the textile waste generated in the US is currently recovered, with 85% ending up in landfills or incinerators.

With the impending policies in the European Union and certain American states, alongside commitments from both public and private sectors to promote fibre-to-fibre recycling, there is a growing demand for infrastructure related to post-consumer textile collection, sorting, and recycling.

Fashion for Good launches the Sorting for Circularity USA report unveiling significant findings from the project. A first of its kind in the US, the report delves into consumer disposal behaviour, textile waste composition, and the potential for fibre-to-fibre recycling within the country. It provides insights for making informed decisions for further investments, infrastructure development and the next steps towards circularity.

The U.S. Textile Waste Landscape
The United States is a global leader in textile consumption and waste generation, positioning itself as one of the largest sources of secondary raw materials for post-consumer textile feedstock. Despite this, only 15% of the textile waste generated in the US is currently recovered, with 85% ending up in landfills or incinerators.

With the impending policies in the European Union and certain American states, alongside commitments from both public and private sectors to promote fibre-to-fibre recycling, there is a growing demand for infrastructure related to post-consumer textile collection, sorting, and recycling.

Addressing Data GPS
In the pursuit of establishing a functional reverse supply chain and the necessary infrastructure, two critical areas lack data  – consumer disposal behaviour, and material characteristics of post-consumer textiles. The Sorting for Circularity USA project addressed these gaps through a comprehensive national consumer survey and waste composition analysis.

The survey revealed that 60% of respondents divert textiles, while 4% discard them, driven primarily by factors such as condition and fit. On the other hand, the waste composition analysis unveiled that over 56% of post-consumer textiles are suitable for fibre-to-fibre recycling, with cotton and polyester being the most prevalent fibre types, indicating a substantial potential for these textiles to be used as feedstock for mechanical and chemical recycling processes.

The project revealed a $1.5 billion opportunity for fibre-to-fibre recycling by redirecting non-rewearable textiles from landfills and incinerators to recycling streams. The report outlines growth strategies for the US textile recycling industry, emphasising enhanced financial value through efficiency improvements, increased commodity valuation, and policy mechanisms like extended producer responsibility schemes. Collaboration among stakeholders is crucial, including brands, government, retailers, consumers, collectors, sorters, recyclers, and financial institutions, to promote circularity, invest in research and development, and advocate for supportive policies and incentives to drive technological innovation. This redirection of textiles towards recycling underscores the substantial economic potential of embracing circularity in the textile industry.
 
There is an opportunity to build on these insights and assess the feasibility of different sorting business models and (semi) automated sorting technologies to create a demo facility suitable for closed-loop textile recycling. Ultimately, evaluating the commercial and technical feasibility of a semi-automated sorting process and identifying investment opportunities to scale solutions nationwide.

23.05.2024

ITM Istanbul with strong VDMA participation

ITM, to be held in Istanbul at the beginning of June, will once again see a strong participation of VDMA member companies. Almost 90 exhibitors from Germany will exhibit at the trade fair, most of whom are members of the VDMA. In addition to the VDMA member companies exhibiting with their own booth, numerous VDMA members will be represented in Istanbul via agents. They cover nearly all different machinery chapters with a focus on spinning, nonwovens, weaving, knitting, warp knitting and finishing.

In Istanbul, the VDMA members will show their latest innovations. In technological terms, significant trends are digitalisation and automation. These themes have been present for some time but will continue to play a central role in meeting the challenges for many years to come. Another trend that has also been around for a while is sustainability. Today it is much more than a buzzword: Efficiency in energy, raw materials or water as well as recycling are not feel-good issues but have a real economic and social background.

ITM, to be held in Istanbul at the beginning of June, will once again see a strong participation of VDMA member companies. Almost 90 exhibitors from Germany will exhibit at the trade fair, most of whom are members of the VDMA. In addition to the VDMA member companies exhibiting with their own booth, numerous VDMA members will be represented in Istanbul via agents. They cover nearly all different machinery chapters with a focus on spinning, nonwovens, weaving, knitting, warp knitting and finishing.

In Istanbul, the VDMA members will show their latest innovations. In technological terms, significant trends are digitalisation and automation. These themes have been present for some time but will continue to play a central role in meeting the challenges for many years to come. Another trend that has also been around for a while is sustainability. Today it is much more than a buzzword: Efficiency in energy, raw materials or water as well as recycling are not feel-good issues but have a real economic and social background.

For the textile machinery manufacturers organised in the VDMA, Turkey is a major trading partner. In 2023, textile machinery and accessories worth approximately 350 million euros were exported from Germany to Turkey, which made Turkey the second biggest sales market for German companies. After three years in which China was the most important supplier of textile machinery to Turkey, Germany has now regained this top position.

Turkey is at the doorstep of Europe, which gives Turkish textile producers a powerful geographic advantage over Asian sourcing destinations. The textile companies in the region have a deep experience and know-how in making the highest quality textile and apparel for leading markets of Europe and employs a young, dynamic, and well-educated workforce.

But ITM is not just a place for visitors from Turkey, as Dr. Harald Weber, Managing Director of the VDMA Textile Machinery Association explains: “It should not be forgotten that ITM not only attracts visitors from Turkey, but also from the Middle East, Central Asia and North Africa. Turkey's proximity to the European Union and its fully integrated textile value chain also make it interesting in terms of the EU's strategy for sustainable and circular textiles and the increasing importance of recycling in the future.”

More information:
ITM VDMA e. V. Textile Machinery
Source:

VDMA e. V.
Textile Machinery

15.05.2024

Italian Trade Agency ITA at ITM 2024 with Italian Pavilion

The Italian Trade Agency (ITA) decided to participate in the ITM 2024 Exhibition this year with the Italian pavilion.

ITM 2024 International Textile Machinery Exhibition is preparing to host textile technology leaders in Istanbul on June 4-8, 2024. ITM 2024, which will be organized this year with the motto 'Discover the Future', will offer opportunities to discover the latest innovations in the sector, establish new business contacts and shape the textile world of the future together. The products to be exhibited at ITM 2024 Exhibition, which will bring together nearly 1300 domestic and foreign companies, will meet with thousands of buyers and visitors.

The Italian Trade Agency (ITA) is the governmental agency that supports the business development of Italian companies abroad and encourages the attraction of foreign investments to the country. ITA has decided to participate in the ITM 2024, which will be held at Tüyap Fair and Congress Center, as a pavilion. With this decision, ITA aims to further strengthen its presence in the sector and in Turkey.

The Italian Trade Agency (ITA) decided to participate in the ITM 2024 Exhibition this year with the Italian pavilion.

ITM 2024 International Textile Machinery Exhibition is preparing to host textile technology leaders in Istanbul on June 4-8, 2024. ITM 2024, which will be organized this year with the motto 'Discover the Future', will offer opportunities to discover the latest innovations in the sector, establish new business contacts and shape the textile world of the future together. The products to be exhibited at ITM 2024 Exhibition, which will bring together nearly 1300 domestic and foreign companies, will meet with thousands of buyers and visitors.

The Italian Trade Agency (ITA) is the governmental agency that supports the business development of Italian companies abroad and encourages the attraction of foreign investments to the country. ITA has decided to participate in the ITM 2024, which will be held at Tüyap Fair and Congress Center, as a pavilion. With this decision, ITA aims to further strengthen its presence in the sector and in Turkey.

Source:

ITM Exhibition, Tüyap Tüm Fuarcılık Yapım A.Ş. and Teknik Fairs Inc.

26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

Graphic: ReHubs
05.12.2023

ReHubs: First General Assembly

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

More information:
ReHubs
Source:

ReHubs

Drop in orders intake in third quarter 2023 Graphic ACIMIT
07.11.2023

Italian textile machinery: Drop in orders intake in third quarter 2023

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

The textile machinery orders index, as processed by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped fully 20% during the third quarter of 2023, compared to the same period for July to September 2022. In absolute terms, the index stood at 84.2 points (basis: 2015=100).

This result is due to a reduction in new orders recorded by manufacturers both on the domestic market and abroad. The decrease in orders in Italy came in at 45%, whereas the drop was just 13% on foreign markets. The absolutevalue of the index abroad stood at 80.5 points, and 119.4 points in Italy. During the year’s third quarter, new orders reached 3.7 months of assured production.

ACIMIT President Marco Salvadè commented on the data, stating that, “The order index for the period from July to September 2023 confirms a contraction in collected orders that was already evident in previous quarters. What worries us above all is the situation with our domestic market, where the declining trend has persisted for seven consecutive terms. Due to this situation, which does not only concern the textile machinery industry, urgent measures are needed from Italian Government to strengthen the competitiveness of Italian manufacturers.”

As far as foreign markets are concerned, the orders index confirms an overall weakened global demand for textile machinery. Indeed, for the first half of 2023, Italian exports slowed in a variety of essential benchmark markets, such as Turkey, China and the United States.

“The global economic scenario remains negative, as consumers are facing a reduced purchasing power, with investments in the textile sector consequently also slowing down,” concludes Salvadè. “In less than a month, ITMA ASIA + CITME will be held from 19 to 23 November in Shanghai, primed as one of the world’s major trade fairs for the textile machinery industry, with the participation of roughly 60 Italian textile machinery manufacturers. We can expect some significant indications on the industry’s state from this event, which will be staged in one of the strategic markets for textile machinery demand.”

More information:
Italy ACIMIT
Source:

ACIMIT

01.11.2023

VDMA @ ITMA ASIA: Smart technologies for green textile production

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

Source:

VDMA e. V.
Textile Machinery