From the Sector

Less wear and superior fiber quality
Technological changes to Oerlikon Neumag’s Baltic crimper thrust pad contacting device have resulted in considerably reduced friction in the crimper rolls and hence less wear and fewer metal particles contaminating the crimped staple fibers.
Thrust pads close the gap between the crimper rolls on either side. Normally, these thrust pads are continually pressed – under high pressure – against the sides of the crimper rolls. Wear and metal debris on the thrust pads is the result of this constant contact. The metal debris can contaminate the fibers, something that is particularly undesirable in hygiene applications.

New thrust pad contacting device for reduced metal debris and greater durability
With the new system, the thrust pads are pressed against the rolls with less pressure and then fixed into place. This prevents fibers from being caught and the frictional force between the pressure disk thrust pad and the crimper roll is minimized. Pilot applications have demonstrated that metal debris from the pressure disks thrust pads is dramatically reduced, making them durable.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.

• Exclusive market insights, best practices and inspirational thoughts, alongside previews of Kornit’s new dedicated polyester printing technology

Kornit Digital, (NASDAQ: KRNT), a global market leader in digital textile printing technology, invites all textile printers, garment decorators, Kornit users, prospective customers and anyone who is curious about the latest trends and technology in digital textile printing, to its “Kornit Discover” events.

Taking place April 3-4 in the New York Metropolitan area, April 11-12 in Duesseldorf, Germany and April 15-17 in Hong Kong, each event will feature educational workshops with real-world insights delivered by high-level guest speakers. Highlighting the North American event will be a keynote by Breakaway Sports owner Scott Goldstone, multiple case study presentations, and a panel discussion with editors of key publications serving the imprinted apparel industry. The European event will feature a keynote called “The Future of Retail” by futurist Kai Gondlach, a digital transformation review of the textile industry by Tansy Fall, editor-in-chief of Digital Textile 4.0 and an insightful chat with Kornit user Shirtracer, Nuremburg. The Asian instance will feature Ron Gilboa as main speaker and Kornit’s customer Paintory.

Omer Kulka, Kornit Digital’s Vice President of Marketing and Product Strategy, said: “There are still a lot of perceptions and opinions in the market about direct-to-garment printing and what its opportunities and limitations are. Printing on dark polyester is a prime example: there is an opinion in the market that digital printing and dark poly don’t go well together, and we just lifted this barrier. With Kornit Discover, we are creating an industry event that will challenge these established thinking patterns. In fact, we will transform the way visitors think and print!”

DOMO Chemicals, a global leader in the field of material engineering will discuss economic and environmental challenges at the 2019 Wood Mackenzie European Nylon Conference in Frankfurt am Main, Germany from March 5 to 7.

Ron Bult, Director of Global Sales of DOMO Engineering Plas-tics will highlight solutions based on ECONAMID®, a family of PA6 & PA66 compounds based on sustainable post-industrial feedstock derived either from film manufactur-ing or from fiber and yarn manufacturing. Depending on the applications and the desired level of physical and mechanical properties, DOMO can provide grades that are unfilled, mineral filled, glass-fiber filled, or carbon-fiber filled.

“DOMO is making major efforts to accelerate the development of sustainable solu-tions that bring value to our customers’ businesses, while acting responsibly towards the environment, employees and communities,” says Bult.

Also at the conference, Philippe Guerineau, VP Sales & Marketing in the company’s Nylon & Intermediates business unit, will join a panel discussion at the conference to discuss on the economic outlook and the future of the polyamide industry. DOMO will be holding consultations and exclusive events for its customers as well.

• Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
• The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

During Textile Exchange’s Sustainability Conference, Giusy Bettoni, C.L.A.S.S. CEO and Founder and her team will have a dedicated space to engage attendees in an open discussion regarding the importance of fashion business strategies. The experience in the space, that will reflect an New York event created for C.L.A.S.S. by Ginger Design, will start with the vision of a film by Cristina Picchi that represents harmony between the various phases of the textile process and the cycles of natural elements. Visitors will walk through a three-dimensional installation designed by Cécile Feilchenfeldt to inspire creativity and explore the limitless possibilities using innovative smart materials.

“We are always proud to have a presence at international events including this year’s Textile Exchange’s Sustainability Conference. It is a great way for us to share our expertise regarding responsible innovation and new business model strategies. As C.L.A.S.S. is headquartered in Milan, we are proud that they selected our city for this year’s conference. Being held in Milan provides a chance for us to support Textile Exchange regarding smart material innovation, many of them produced in Italy.” said Bettoni.

Just off their return from Première Vision in Paris, Bettoni who is also the Sustainability Consultant for Smart Creation, recognizes the importance for her company to have a strong international presence to spread C.L.A.S.S.’ message to a global audience regarding responsible creation. 

As C.L.A.S.S. enters their second decade of business, they have expanded their business activities to include e-commerce that provides an opportunity for fashion start-up to purchase up to a maximum of 50, an initiative launched to support fashion start-ups. And a new division, C.L.A.S.S. Education, an initiative Bettoni co-founded with James Mendolia, also a Professor, Fashion Institute of Technology. Mendolia has been visiting universities to speak to fashion design, business, textiles and production students in Europe, Asia and North America to encourage attendees to infuse a new way of design thinking and move from a linear to a circular business model.   

• Back to Seoul: JEC Asia gathers the composites industry in Korea for its 11th edition
• JEC Asia, November 14-16, 2018 – COEX Center, Seoul, South Korea

Paris - After the record-breaking figures of the 2017 edition, that marked the move of JEC Asia from Singapore to Seoul, the event is returning to the capital city of the Republic of Korea with a strong program, not only on the exhibition floor, but also in the conference sessions and all services at the disposal of every attendee.

“We are very grateful for the support of the industry, government bodies, and academics, regarding the evolution of JEC Asia, that has led to the success of the platform. Indeed, 90% of the show floor is already booked which bodes well for the preparation of the event.” Commented Christian STRASSBURGER, Events Director Asia for JEC Group.

“On top of that, the event is truly international, as 45% of the exhibitors are coming from outside Asia. JEC Asia will welcome pavilions from Germany, France, Italy, Japan, China and Singapore, as well as the major composite clusters in Korea.” He added.

FOCUS ON THE AUTOMOTIVE INDUSTRY

The future of mobility is a hot topic for composite materials and JEC Asia will represent, promote and provide information about the increasing integration of composites in automotive developments.
Numerous programs will be offered, such as a whole day conference on Composites in Automotive, a Leadership Composites Circle, an Auto Planet, showcasing parts, a B2B meetings program, a JEC Innovation´Award category and Composites tours (site visits of composite-related facilities).

Finally, for the second time, JEC Asia will host the International Carbon Festival, organized by KCTECH and the Jeonju region, with top-notch conferences and international speakers.

Key Figures 2017

• +230 companies
• 6,271 professional visits
• 43 speakers
• 42 countries represented
• 12 JEC Innovation Awards
• 400 B2B meetings
• 2 Composites Tour

Exhibiting at this week’s Association for Professionals in Infection Control and Epidemiology (APIC) Annual Conference, Hygienically Clean Healthcare certified laundries provided nearly 200 copies of a training video guiding caregivers in improving soiled linen handling performance.

Provided on a flash drive: the 13-minute video (The Six Cs: Handling Soiled Linen in a Healthcare Environment), a quiz to immediately assess viewers’ grasp of the video’s lessons and posters to reinforce these year-round. Distributed since 2016, the video has been hailed for its value in aiding compliance with OSHA universal precautions regarding items saturated with blood, bodily fluids, harmful residue from treatments and other potentially infectious material.

The flash drive offer intrigued infection preventionists (IPs) from a single facility or those responsible for this function throughout health systems, whether acute or outpatient care environments or both. The drive also attracted the attention of other professionals who visited the Hygienically Clean exhibit, such as federal and state health officials and suppliers of products and services to the IP profession.

Distributing the flash drive is a hallmark of the Hygienically Clean program’s philosophy of addressing healthcare providers’ operational needs outside the scope of outsourced laundries’ traditional functions. Certified operators’ certification fees provide funding for creating and distributing the video and other education tools for healthcare facilities.

Visitors to the Minneapolis display who previously received the video vouched for its effectiveness. Certified laundries have individually distributed the flash drive to customers and prospects in addition to  their collective effort to provide them at previous APIC and Association for the Healthcare Environment (AHE) expos.

The video’s easy-to-follow steps improve infection control and patient care and reduce costs by addressing OSHA-required universal precautions. Employees who handle soiled linen (usually nurses and environmental services staff) must assume all human blood and potentially infectious materials they touch are infected, because they can’t be sure which patients are infected or what infections are present.

Adhering to the six Cs (cover, collect, contain, consolidate, clean, cooperate) each day prevents injury and reduces the risk of spreading of infection to co-workers, patients and residents. These positive outcomes are only achieved when workers first protect themselves.

The flash drive is available to all healthcare providers at no cost. It also contains the Hygienically Clean standard and other guidance documents for infection preventionists related to linen and uniforms. Among these documents: Handling Clean Linen in a Healthcare Environment, an 8-page guide to safeguarding through effective transportation, storage and distribution.

• Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

• EarthColors, traceable from nature to fashion
  The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
  The EarthColors have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.
   
• Color Atlas, a game-changing system for fashion design
  The Color Atlas by Archroma® is a groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools: The six-volume ‘Color Atlas Library’ with 4,320 color swatches and cotton poplin samples, the ‘Color Atlas Compact’ in two volumes for increased portability, and the ‘Color Atlas Online’ allowing to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly.
   
• ‘Zero add-on’ formaldehyde finishing and coloring solutions
  Since January 1, 2016, formaldehyde is classified by ECHA5 as “may cause cancer” (Carc. 1B). Archroma offers a unique proposition combining: Fixapret® Resin WFF, a “zero add-on” formaldehyde anti-wrinkle finishing system and Helizarin® EcoSafe a “zero add-on”4 formaldehyde printing system. With Fixapret® Resin WFF, and Helizarin® EcoSafe, consumers can enjoy end-products that look good, whilst saving on precious resources and being gentler on the skin.
   
• Sanitized® Odoractiv 10, active odor control function for polyester textiles
  Visitors at the booth will be able to experience a new unique dimension of odor control function for functional polyester textiles. The newly developed wash-resistant Sanitized® Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn.

Spotlight on automotive solutions
Having acquired a 75% stake in the M. Dohmen group, a specialist in textile dyes and chemicals for automotive, carpet and apparel, Archroma is now in the position to extend its offer in expert products and services. M. Dohmen will be present at the show at Booth A118.

Solution packages for sustainability
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.

• JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.