From the Sector

Reset
8 results
18.09.2019

Hexcel to Exhibit at CAMX 2019

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

STAMFORD, Conn. – At this year’s CAMX conference, taking place on September 24-26 in Anaheim, CA (Booth L42), Hexcel will promote its broad portfolio of composite innovations for aerospace and industrial applications.

On display at the Hexcel booth, visitors will see an integrated wing panel demonstrator made with HiMax™ non-crimp reinforcements that were specially developed to complement a new generation of infusion resin systems. Visitors will also see a wing box demonstrator made from HiTape® dry carbon reinforcements. Both parts were injected with Hexcel’s RTM6 infusion resin and incorporate a toughening veil to enhance mechanical properties to meet the structural requirements for aerospace parts.

With 50 years of experience and the most qualified carbon fiber positions on aerospace programs in the industry with its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing a new fiber to its portfolio. HexTow® HM54 combines high modulus and high tensile strength, which allows structural designers to achieve higher safety margins for both stiffness and strength-critical applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications. HexTow® carbon fibers are excellent not only for aerospace applications but also industrial and recreational applications, examples of golfing applications will be on display.

Additive manufacturing is on the forefront of innovation for composite technologies, and Hexcel is leading the way with its HexAM® additive manufacturing process. HexAM® additive manufacturing combines high performance PEKK thermoplastics with carbon fiber to produce flight-ready 3D printed HexPEKK® parts. HexPEKK® structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts in highly demanding aerospace, satellite and defense applications.

HexPly® M77 snap-cure prepregs are yet another example of Hexcel technology leading the way. HexPly® M77HF, the latest member of this quick-curing prepreg family, is revolutionizing the world of composites for high-performance sporting goods with its faster production times and excellent surface quality. It will be featured in the Hexcel booth in two products – a carbon fiber Goode water ski which is setting records in the competitive world with its precision and durability, and in a HED cycling wheel noted for its aerodynamics and light weight.

Among Hexcel’s latest technologies are the RF Interference Control materials made by ARC Technologies, a Hexcel company. A selection of these industry-leading custom RF / EMI and microwave absorbing composite materials for military, aerospace and industrial applications will be on display at the Hexcel booth.

HexForce® bias weave woven reinforcements are a patented solution to optimize material usage. These bias weave reinforcements are continuous rolls of carbon fiber fabric in which the warp and weft yarns are oriented on the bias at +/- 45° which can reduce prepreg waste up to 60%. Visitors at CAMX will be able to see this new woven reinforcement and learn more.

Source:

AGENCE APOCOPE

(c) Roof courtesy
09.09.2019

CHOMARAT’S CARBON RANGE IN THE SPOTLIGHT AT CAMX 2019 EXPO

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

At CAMX Expo, Chomarat is showcasing its range of carbon reinforcements, including live demos: a rocket fairing mold, a kayak paddle and a flat panel will be on display in the demonstration area of Composites One, a partner of Chomarat. The Chomarat carbon range is also available in the USA through Composites One’s distribution network.

DEMONSTRATING THE UNIQUE PROPERTIES OF CHOMARAT’S REINFORCEMENTS
For the rocket fairing mold, the kayak paddle and the flat panel applications, Chomarat’s C-WeaveTM carbon reinforcement offers a unique and excellent visual appearance and structural performance at the same time. “In addition to C-WeaveTM, the kayak paddle comprises another reinforcement: G-flowTM, the 2-in-1 reinforcement for infusion to strengthen the vacuum-flow,” explains Travis Irvin, Sales Manager and Closed Mould Process Expert at Chomarat.

Other live demos of skateboards will demonstrate the potential for high-volume production with RovicoreTM, the famous glass sandwich reinforcement created by Chomarat. ”RovicoreTM is always at the forefront of technology for LRTM process,” he adds.

Moreover, Chomarat is displaying a motorcycle helmet with exposed carbon and a very light kayak paddle, highlighting the properties of C-WeaveTM. A tennis racket using C-PLYTM will also be displayed at the show.

 

More information:
CHOMARAT
Source:

APOCOPE Agency

11.06.2019

Hexcel at Paris Air Show 2019: Le Bourget, 17 – 23 June

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

STAMFORD, Conn. – At this year's Paris Airshow [Le Bourget, June 17-23] Hexcel will promote a range of carbon fibers and composite materials used to manufacture high-performance weight-saving structures in civil aircraft, engines, helicopters, and space applications.

Visitors to the Hexcel stand will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® carbon fiber reinforcements. HiTape® dry carbon reinforcements were developed for the automated lay-up of preforms and to complement a new generation of HiFlow™ resin systems, producing high-quality aerospace structures using the resin infusion process. The reinforcements incorporate a toughening veil to enhance mechanical properties and meet the structural requirements for aerospace parts. The I-Beam was manufactured using C-RTM (Compression Resin Transfer Molding) and was injected with Hexcel’s RTM6 resin in a process taking less than five minutes.

Hexcel honeycomb saves weight and enhances stiffness in composite structures, and the company provides a range of engineered core solutions that enable highly contoured parts with precision profiling to be produced to exact customer specifications. A sample part made from aluminum FlexCore® that is CNC machined on both sides and formed and stabilized with both peel ply and flyaway layers of stabilization will be on display.

Another honeycomb innovation is Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.
Another Hexcel technology to benefit aircraft engines is HexShield™ honeycomb which provides high-temperature resistance in nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential reuse of material after a fire.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

Another area of expertise that uses HexTow® carbon fiber is additive manufacturing, where Hexcel uses PEKK ultrahigh performance polymers and HexAM™ technology to manufacture carbon reinforced 3D printed parts. This innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Later this year Hexcel will open a joint research and development laboratory in Les Avenières (Isère), France with Arkema to develop carbon fiber-reinforced thermoplastic prepreg tapes for aerospace, space and defense applications. A spool of thermoplastic prepreg tape will be on display on Hexcel’s stand to showcase this cost-effective technology that enables lightweight parts to be produced in faster production cycles for future generations of aircraft.

Hexcel’s stand is located next to Hexcel’s official distributor for aerospace products, Groupe Gazechim Composites. In 2018, Hexcel and Gazechim formed a joint venture, HexCut Services, to provide aerospace and defense customers with customized kitting services that include Hexcel’s innovative carbon fiber prepreg, fabrics and adhesives. Pre-cut kits save customers time and investment, reduce inventory and minimize material losses through scrap reduction.

More information:
Hexcel Paris Air Show Composites
Source:

AGENCE APOCOPE

(c) CHOMARAT
04.03.2019

Chomarat Carbon Reinforcements at JEC WORLD 2019

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

 

Source:

AGENCE APOCOPE

(c) Hexcel
04.03.2019

Hexcel at JEC World 2019

  • Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

  • Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

Source:

AGENCE APOCOPE

Chomarat North America awarded as 9100 certification for the aerospace industry
28.05.2018

Chomarat North America awarded as 9100 certification for the aerospace industry

CHOMARAT North America has just been awarded AS 9100 certification. CHOMARAT Group’s US facility that specializes in Advanced Composites reinforcements is located in Williamston, South Carolina. The new certification covers aerospace quality management systems and follows the Group’s development strategy relative to quality and risk management. “Our North American plant’s new AS 9100 certification proves our organisational maturity and provides a vital asset to enable us to become a leading aerospace supplier,” said Michel COGNET, Group Managing Director at CHOMARAT.

MEETING THE DEMANDS OF THE AEROSPACE MARKET

CHOMARAT North America has just been awarded AS 9100 certification. CHOMARAT Group’s US facility that specializes in Advanced Composites reinforcements is located in Williamston, South Carolina. The new certification covers aerospace quality management systems and follows the Group’s development strategy relative to quality and risk management. “Our North American plant’s new AS 9100 certification proves our organisational maturity and provides a vital asset to enable us to become a leading aerospace supplier,” said Michel COGNET, Group Managing Director at CHOMARAT.

MEETING THE DEMANDS OF THE AEROSPACE MARKET
With this certification, CHOMARAT North America is following in the footsteps of the Group’s French plants that were certified to ES 9100 in 2012. The facility now meets the strict criteria set by the market for high performance composites reinforcements for the aerospace industry. The quality system and risk management standards are recognised by purchasers worldwide and is in line with the Group’s growth strategy for the aerospace market. “We are proud of this AS 9100 certification that clearly demonstrates our commitment to quality management and reliability. This accomplishment now allows us to compete as an international aerospace supplier from multiple continents!” said Brian LAUFENBERG, President of CHOMARAT’s NA business.

C-PLYTM,
THE CHOMARAT REINFORCEMENT THAT HAS ALREADY PROVEN ITS WORTH IN THE AEROSPACE INDUSTRY
CHOMARAT has already made a name for itself in the aerospace market with fabrics, tapes and multiaxial carbon reinforcements, particularly its C-PLY™ range. These materials are designed for primary and secondary structures as well as aircraft interior parts. These highly modular materials offer great angle and ply flexibility and open up new opportunities for designing lighter, more efficient and lower cost composite parts. This is a huge advantage in a market with high productivity demands.
This is why C-PLY™ was recently chosen by VX AEROSPACE for their foldaway drone, which can be stowed inside a cylindrical container and deployed from a tactical aircraft. The carbon multiaxial material is used in the construction of the wing, the horizontal stabilizers, the vertical fin and all of the control surfaces. “There is no better material! The extremely thin multiaxial reinforcement is perfect, because strength and stiffness are tailored according to demand. It offers extremely high performance at a reduced cost.” said VX AEROSPACE Chief Engineer Bob SKILLEN.

Source:

Agence APOCOPE

Airbus Helicopters unveils third H160 prototype with striking carbon livery © Hexcel Corporation
14.12.2017

Hexcel Corporation: Airbus Helicopters unveils third H160 prototype

Hexcel Corporation is proud to announce the unveiling of the third H160 prototype from Airbus Helicopters, featuring a striking carbon-inspired livery that represents the composite materials Hexcel supplies for the helicopter.

Hexcel Corporation is proud to announce the unveiling of the third H160 prototype from Airbus Helicopters, featuring a striking carbon-inspired livery that represents the composite materials Hexcel supplies for the helicopter.

This gesture follows Hexcel’s announcement in June that its reinforcements, prepregs, adhesives and honeycomb materials had been selected for the H160’s composite fuselage structures and main rotor blades. The H160 was designed by Airbus Helicopters to create added-value for customers in terms of performance, economic competitiveness, safety and comfort. The use of Hexcel’s composite materials throughout the structure contributes to the lightweight fuel-saving design and performance optimization.
Airbus Helicopters decided to promote the H160 program and its high carbon fiber content in a way that recalls the livery previously used for the A350 XWB. The A350 XWB has a structure that is 53% composites and Hexcel supplies the carbon fiber prepreg for all of the aircraft’s composite primary structures.
The newly unveiled H160 prototype is a fitting tribute to the 40-year partnership between Hexcel and Airbus Helicopters.

CHOMARAT SIGNS A NEW DISTRIBUTION AGREEMENT WITH VELOX FOR ITS RANGE OF CARBON REINFORCEMENTS © CHOMARAT
CHOMARAT’s glass and carbon reinforcements
04.10.2017

CHOMARAT signs a new agreement with VELOX

  • CHOMARAT signs a new distribution agreement with VELOX for its range of carbon reinforcements

The international textile group CHOMARAT announced the signing of a distribution agreement with VELOX, a European distributor in the market for composite materials. The partnership agreement covers the distribution of CHOMARAT reinforcements for high-performance (carbon) composites, in France, Italy, and the United Kingdom, as well as the distribution of CHOMARAT’s complete range of carbon and glass reinforcements in Turkey.

Stepping up the distribution of CHOMARAT´s carbion ranges in Europe

This new partnership will enable CHOMARAT to extend its network in France, Italy and the United Kingdom for its carbon fabric and multiaxial ranges, by offering its customers optimum, locally based services in line with the Group’s development strategy for high-performance composites in Europe.

CHOMARAT’s compete glass and carbon range is now distributed in Turkey

  • CHOMARAT signs a new distribution agreement with VELOX for its range of carbon reinforcements

The international textile group CHOMARAT announced the signing of a distribution agreement with VELOX, a European distributor in the market for composite materials. The partnership agreement covers the distribution of CHOMARAT reinforcements for high-performance (carbon) composites, in France, Italy, and the United Kingdom, as well as the distribution of CHOMARAT’s complete range of carbon and glass reinforcements in Turkey.

Stepping up the distribution of CHOMARAT´s carbion ranges in Europe

This new partnership will enable CHOMARAT to extend its network in France, Italy and the United Kingdom for its carbon fabric and multiaxial ranges, by offering its customers optimum, locally based services in line with the Group’s development strategy for high-performance composites in Europe.

CHOMARAT’s compete glass and carbon range is now distributed in Turkey

One component of the agreement deals with the distribution of CHOMARAT’s complete range of glass and carbon reinforcements in Turkey, where the composite market is booming, in particular in the transportation sector. Relying on VELOX’s strong foothold in the Turkish market, CHOMARAT will build up its flagship ROVICORE™ line, the first glass-fibre-reinforced sandwich reinforcement, which was designed and developed by CHOMARAT for closed-mould processes. “The idea is to step up our glass activities and still offer our customers more flexibility over the entire range of our reinforcements,” explains Vincent CHOLVY, in charge of the Turkish market at CHOMARAT.

VELOX secures its position as an “innovation distributor”

By distributing CHOMARAT’s high-performance composites, Velox will develop its offering in the transportation, sports & leisure and boating sectors. According to Serge GRADYS, Manager of the VELOX Composites Business, “in Europe, the distribution of the CHOMARAT range of carbon multiaxial range with C-WeaveTM and C-PlyTM, gives us a real competitive advantage and enables us to maintain our position as an innovation distributor. The same is true for the carbon and glass ranges distributed in Turkey!”