From the Sector

Reset
487 results
GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix (c) GRAFE Advanced Polymers GmbH
23.08.2021

GRAFE: Plagiarism Protection with Marking Substances in the Plastic Matrix

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

In general, there are two options: x ray and light fluorescence, i.e. fluorescent X-rays or light. With the first option, the base color has no influence (not even black) and the customer benefits from low addition dosage and batch price, but this method requires higher investment. "With light fluorescence, on the other hand, detection is done by a measuring device, which is preconfigured by our partner or by us directly. Different types are available, from handy hand-held measuring devices to stationary office solutions to inline spectrometers, in order to have a control take place directly during production," Ludwig explains. With this method, the masterbatch dosage is based on the base color, among otherv things. The method of operation is fast and simple, and the necessary investment is also manageable.

From injection molding and extrusion to transparent and fiber applications, almost all areas of plastics processing come into question.

Source:

GRAFE Advanced Polymers GmbH

Oerlikon Webinar with a Focus on Customer Service (c) Oerlikon
19.08.2021

Oerlikon Webinar with a Focus on Customer Service

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

Source:

Oerlikon

(c) Textile Exchange
17.08.2021

Textile Exchange: Preferred Fiber and Materials Market Report 2021 released

  • Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
  • With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

  • Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
  • With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

The report is a unique annual publication about global fiber and materials production, availability, and trends, including those associated with improved social and environmental impacts, referred to as ”preferred.” The comprehensive report includes quantitative data, industry updates, trend analysis and inspiring insights into the work of leading companies and organizations as they create material change.

The results show that between 2019 and 2020 the market share of preferred cotton increased from 24 to 30 percent and recycled polyester from 13.7 to 14.7 percent. Preferred cashmere increased from 0.8 to 7 percent of all cashmere produced while Responsible Mohair Standard certified fiber expanded from 0 to 27 percent of all mohair produced worldwide in its first year of existence in 2020. The market share of FSC and/or PEFC certified MMCFs increased to approximately 55-60 percent. While the market share of recycled MMCFs is only 0.4 percent, it is expected to increase significantly in the following years.

Brands’ increased interest in the use of preferred fibers and materials was also demonstrated by 75 percent increase in the total number of facilities (to 30,000) around the world becoming certified to the organization’s portfolio of standards in 2020. However, the report also notes that despite the increase, preferred fibers only represent less than one-fifth of the global fiber market. Less than 0.5 percent of the global fiber market was from pre- and post-consumer recycled textiles.

Indeed, global fiber production has almost doubled in the last 20 years from 58 million tonnes in 2000 to 109 million tonnes in 2020. While it is not yet clear how the pandemic and other factors will impact future development, global fiber production is expected to increase by another 34 percent to 146 million tonnes in 2030 if the industry builds back business as usual. If this growth continues, it will be increasingly difficult for the industry to meet science-based targets for climate and nature.

Textile Exchange aims to be the driving force for urgent climate action, and its Climate+ strategy calling for the textile industry to reduce greenhouse gas emissions by 45 percent by 2030 compared to a 2019 baseline in the pre-spinning phase of textile fiber and materials production, while also addressing other impact areas interconnected with climate such as water, biodiversity, and soil health.

Source:

Textile Exchange

12.08.2021

SGL Carbon: strong first half of 2021

  • Transformation program and improving order situation show first successes
  • Sales up 8.8% to €496.7 million compared with first half of previous year
  • Adjusted EBITDA improves by 70.7% to €71.7 million
  • Positive business development led to forecast increase on July 13, 2021

While the past fiscal year 2020 was still characterized by a Corona-related slump in orders in many business areas of SGL Carbon, demand picked up again in the first six months of 2021. Accordingly, Group sales increased by 8.8% to €496.7 million in H1 2021 (H1 2020: €456.5 million).

The Carbon Fibers and Composite Solutions Business Units particularly contributed to the €40.2 million increase in sales. Carbon Fibers contributed €166.4 million to Group sales, especially benefiting from increased demand from the automotive market segment. In the Composite Solutions Business Unit, the increase in sales of 52.4% to €60.2 million was also primarily based on the recovering demand from the automotive industry.

  • Transformation program and improving order situation show first successes
  • Sales up 8.8% to €496.7 million compared with first half of previous year
  • Adjusted EBITDA improves by 70.7% to €71.7 million
  • Positive business development led to forecast increase on July 13, 2021

While the past fiscal year 2020 was still characterized by a Corona-related slump in orders in many business areas of SGL Carbon, demand picked up again in the first six months of 2021. Accordingly, Group sales increased by 8.8% to €496.7 million in H1 2021 (H1 2020: €456.5 million).

The Carbon Fibers and Composite Solutions Business Units particularly contributed to the €40.2 million increase in sales. Carbon Fibers contributed €166.4 million to Group sales, especially benefiting from increased demand from the automotive market segment. In the Composite Solutions Business Unit, the increase in sales of 52.4% to €60.2 million was also primarily based on the recovering demand from the automotive industry.

With sales of €221.2 million, the Graphite Solutions business area contributed around 44.5% of SGL Group sales. The 3.8% increase in the division's sales was particularly due to the positive development in the important markets of the LED, semiconductor and automotive industries.

Transformation program:
The restructuring and transformation process initiated at SGL Carbon made a significant contribution to the Company's positive sales and earnings performance. In addition to leaner and more efficient structures as well as a reorganization of the business units with responsibility for results, a large number of improvements and cost initiatives in all business units and sites have contributed to the success of the ongoing transformation program.

Forecast increase:
Due to pleasing business development in the first half of the year as well as transformation successes, SGL Carbon raised its forecast for fiscal year 2021 on July 13, 2021. For the financial year 2021, the company now expects consolidated sales of around €1.0 billion (previously: €920 - 970 million). In line with developments in the first half of 2021 and the results from the transformation, adjusted EBITDA for 2021 is expected to be between €130 - 140 million (previously: €100 - 120 million). Accordingly, a slightly positive net profit is now forecasted for fiscal year 2021 (previously: €-20 million to €0).

More information:
SGL Carbon SGL Carbon SE
Source:

SGL CARBON SE

 

04.08.2021

Lenzing: Earnings more than doubled in the first half of 2021

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

  • Strong operating result: EBITDA at EUR 217.8 mn, cash flow from operating activities at EUR 199.8 mn
  • Major strategic projects continue fully on track – production start of the lyocell plant in Thailand in the fourth quarter of 2021
  • Start of strategic cooperation agreement for textile recycling with Södra
  • New milestones in the implementation of group-wide carbon neutrality: EUR 200 mn investment in existing locations in Asia
  • Guidance 2021: Lenzing expects EBITDA of at least EUR 360 mn

The Lenzing Group reported a significant improvement in revenue and earnings in the first half of the year. Growing optimism in the textile and apparel industry and the ongoing recovery in retail caused a substantial increase in demand and prices on the global fiber market, in particular at the beginning of the current financial year.

Revenue rose by 27.5 percent to EUR 1.03 bn in the first half of 2021. This increase is primarily attributable to higher viscose prices, which stood at more than RMB 15,000 in May thanks to significantly higher demand for fibers, especially in Asia. The focus on wood-based specialty fibers such as TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ branded fibers also had a positive impact on the revenue development; the share of specialty fibers in fiber revenue rose to 72.8 percent in the reporting period. The negative impact of more unfavorable currency effects was consequently more than offset.

The earnings development essentially reflects the positive market development and was additionally reinforced by measures to improve efficiency. Energy and logistics costs increased significantly throughout the entire reporting period. EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled and amounted to EUR 217.8 mn in the first half of 2021 (compared to EUR 95.6 mn in the first half of 2020). The EBITDA margin rose from 11.8 percent to 21.1 percent. Net profit for the period amounted to EUR 96.1 mn (compared to a net loss of EUR minus 14.4 mn in the first half of 2020) and earnings per share to EUR 3.06 (compared to EUR 0.06 in the first half of 2020).

“Lenzing had a very strong first half-year. The demand for our sustainably produced specialty fibers once again developed excellently,” says Stefan Doboczky, CEO of the Lenzing Group.

Source:

Lenzing AG

(c) Andritz AG
02.08.2021

ANDRITZ to supply textile recycling line to Renaissance Textile (F)

International technology Group ANDRITZ has received an order from Renaissance Textile to deliver a recycling line for their first recycling platform, located in Laval, France. Start-up of the recycling line from ANDRITZ Laroche is scheduled for the end of Q2 2022.

First of all, postconsumer waste fibers will be opened, then mixed with virgin fibers and spun once again in order to ultimately produce new textiles. The specific design of this line is the outcome of close collaboration between experts from ANDRITZ Laroche and the customer, with customized trials being conducted at the ANDRITZ technical center in Cours, France.

Renaissance Textile’s target is to become the first French recycling platform dedicated to end-of-life
textiles, and the company will soon open the new 12,000 sqm plant.

International technology Group ANDRITZ has received an order from Renaissance Textile to deliver a recycling line for their first recycling platform, located in Laval, France. Start-up of the recycling line from ANDRITZ Laroche is scheduled for the end of Q2 2022.

First of all, postconsumer waste fibers will be opened, then mixed with virgin fibers and spun once again in order to ultimately produce new textiles. The specific design of this line is the outcome of close collaboration between experts from ANDRITZ Laroche and the customer, with customized trials being conducted at the ANDRITZ technical center in Cours, France.

Renaissance Textile’s target is to become the first French recycling platform dedicated to end-of-life
textiles, and the company will soon open the new 12,000 sqm plant.

More information:
Andritz Andritz AG circular economy
Source:

Andritz AG

Foto: Pixabay
26.07.2021

Lenzing invests GBP 20 mn in wastewater treatment at Grimsby site

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

  • Full utilization of production capacity possible at the site
  • New EU environmental requirements will be fully and promptly satisfied starting in 2024

The Lenzing Group, a global provider of wood-based specialty fibers for the textile and nonwoven industries, is investing GBP 20 mn (equal to EUR 23.3 mn) to build a new, state-of-the-art wastewater treatment plant at its site in Grimsby, United Kingdom. The investment is part of the company’s plans to reduce wastewater emissions by 2022.

Once it has implemented this project, Lenzing will have biological wastewater treatment plants that meet the best available techniques (BAT) quality standard at all its production sites. The plant design, which will employ a new technology developed as part of a research project, is fully aligned with the UK regulator and supported by the local authorities.

The site’s current wastewater situation complies fully with the EU Water Framework Directive as well as all local laws and regulations. The investment has been approved by the Supervisory Board, ensuring that construction can start this year and the plant will be commissioned well before the UK-ratified EU directive1 goes into effect. This will be the largest investment since opening this lyocell site, which manufactures premium products for technical and innovative market segments, among other things.

Responsible water use
After modernizing the wastewater treatment plant at the company’s Purwakarta site in Indonesia, the construction of the new plant in Grimsby marks another big step toward reducing the Group’s wastewater emissions 20 percent by 2022 (against a 2014 baseline). Responsible water use is one of the core elements of Lenzing’s “Naturally positive” sustainability strategy and is largely executed by using water efficiently in manufacturing and employing state-of-the-art water treatment technologies.

INDA: RISE® - Virtual Conference opens and Speakers announced (c) INDA
26.07.2021

INDA: RISE® - Virtual Conference and Speakers announced

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

The 11th edition of RISE®, Research, Innovation & Science for Engineered Fabrics Conference will be presented virtually on Sept. 28-30 with more than 150 professionals in product development, materials science, and new technologies.

The conference will culminate on Sept. 30 with the presentation of the 2021 RISE® Innovation Award recognizing problem-solving innovations that advance the nonwovens industry.

The program includes presentations from industry leaders, round-table discussions and question-and-answer sessions on the key themes of material science developments for sustainable nonwovens, sustainability, increasing circularity in nonwovens, and promising innovations in nonwovens, processes and materials:

  • Promising Materials Development Using PLA
    presented by Behnam Pourdeyhimi, Ph.D., William A. Klopman Distinguished Professor and Executive Director, North Carolina State University, The Nonwovens Institute
  • Phantom Platform: The Polyolefin-cellulose Coformed Substrates Technology at Its Best, featuring insights from Fabio Zampollo, CEO, Teknoweb Materials S.r.l.
  • Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles
    with speakers, DeeAnn Nelson, Ph.D., Development Program Manager, and Nick Carter, Vice-President of Marketing and Business Intelligence, both from Avgol Nonwovens
  • High-Loft, Ultra-Soft Hygiene Solutions,
    presented by Paul Rollin, Ph.D., Global Team Lead – Nonwovens, ExxonMobil Chemical Company
  • Innovating a Sustainable Future for Nonwovens; A European Perspective
    given by Matthew Tipper, Ph.D., Operations Director, Nonwovens Innovation & Research Institute Ltd., (NIRI), UK
  • Filtration Media Functionalized with Zinc Oxide
    by Wai-shing Yung, Ph.D., Technical Director, Ascend Performance Materials
22.07.2021

Lenzing awarded platinum status for sustainability by EcoVadis

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group’s ambitious climate targets form an essential part of its strategy and responsibility to future generations. In 2019, Lenzing became one of the world’s first fiber manufacturers to commit to reducing CO2 emissions per ton of product by 50 percent by 2030, and even becoming climate-neutral by 2050. The Science Based Targets Initiative, a recognised organisation in the area of climate-relevant target-setting, has scientifically validated Lenzing’s climate targets.

This scientific validation also forms one of the essential criteria that EcoVadis highlights in its rating. In addition, the responsible procurement of raw materials – according to social and ecological aspects – was also highlighted as a further core element in the company’s sustainability strategy, as well as support for external environmental initiatives (Sustainable Apparel Coalition, Fashion Industry Charter for Climate Action) and initiatives on labour and human rights issues (Sustainable Apparel Coalition).

(c) Trützschler
21.07.2021

Trützschler at SINCE/ANEX

The pandemic shows the importance of single-use nonwovens for disinfectant and other wipe application. Therefore Truetzschler focuses on both high-performance solutions for an efficient production of disinfectant and biodegradable wipe materials.

It’s the classic combination of polyester and viscose fibers which combines exceptional good wipe characteristics with affordable raw material costs. For such high-speed carding/spunlacing processes Truetzschler Nonwovens offers production line configurations with three roller cards. Such an extended carding section not only enhances web quality but also fully utilizes AquaJet’s spunlacing power to deliver up to 4 tons of nonwovens per hour.

Line concepts for eco-friendly baby and body wipes are another focus at booth 1J20. The latest hot topic: Truetzschler‘s proven CP (carded/pulp) nonwoven line concepts with built-in flexibility. The machinery is able to process various pulp types for the wet-laid layer and various fiber types for the carded layer.

The pandemic shows the importance of single-use nonwovens for disinfectant and other wipe application. Therefore Truetzschler focuses on both high-performance solutions for an efficient production of disinfectant and biodegradable wipe materials.

It’s the classic combination of polyester and viscose fibers which combines exceptional good wipe characteristics with affordable raw material costs. For such high-speed carding/spunlacing processes Truetzschler Nonwovens offers production line configurations with three roller cards. Such an extended carding section not only enhances web quality but also fully utilizes AquaJet’s spunlacing power to deliver up to 4 tons of nonwovens per hour.

Line concepts for eco-friendly baby and body wipes are another focus at booth 1J20. The latest hot topic: Truetzschler‘s proven CP (carded/pulp) nonwoven line concepts with built-in flexibility. The machinery is able to process various pulp types for the wet-laid layer and various fiber types for the carded layer.

Topics at SINCE also are technologies for pulp-based WLS (wet-laid/spunlaced) nonwovens, cotton nonwovens and nonwovens made from 100% viscose or lyocell fibers. Truetzschler Card Clothing introduces a new generation of condenser wires.

Source:

Trützschler Nonwovens

Photo: norda: DSMPMPR010
14.07.2021

norda™: Flagship product with DSM’s bio-based Dyneema® fiber

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

In addition to the increased foot stability and wearer comfort of the upper, Dyneema® fibers are also used to increase abrasion resistance and stretch in the shoe laces – providing four times the level of strength when compared to standard lace materials like nylon and polyester.

“When we set out to create the norda™ 001, our mission was to design an ultra-strong and durable high performance trail running shoe, and do it as sustainably as possible,” states Willamina and Nick Martire, Co-Founders, norda™. “To achieve our goal, we had to look outside of the standard materials used by the footwear industry. We realized the properties of bio-based Dyneema® beat everything available today.”

In line with DSM’s commitment to protect people and the environment they live in, bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. Sourced from renewable, bio-based feedstock, DSM’s latest advancement in fiber technology uses the mass balance approach to further reduce the reliance on fossil fuel based resources, while still contributing to a more circular economy.

Source:

EMG for DSM

(c) Autoneum
14.07.2021

Autoneum: Carpets even more eco-friendly

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Autoneum carpet systems already meet high standards of sustainable mobility due to their high content of recycled fibers. Thanks to an alternative backcoating (ABC) process, Autoneum carpets are now becoming even more environmentally friendly: By replacing the latex commonly used in standard backcoatings with thermoplastic material, the recyclability of carpets at the end of product life is further  improved. In addition, the innovative manufacturing process greatly reduces water and energy consumption and thus CO2 emissions in production.

Lightweight, textile-based carpet technologies such as Di-Light or Relive-1 significantly improve the environmental performance of carpets. For example, Di-Light-based carpets consist of up to 97% recycled PET; aside from that, they are around 20% lighter than conventional needlepunch carpets, thus contributing to lower fuel consumption and CO2 emissions from vehicles. In addition, Autoneum needlepunch carpets are now even more sustainable thanks to the innovative ABC process, which uses a thermoplastic adhesive instead of latex in the backcoating: Unlike latex, thermoplastic adhesives can be heated and melted down together with the carpet components made of pure PET at the end of the product life cycle, which facilitates recycling considerably. Furthermore, since the fibers of the thermoplastic mono-material are easier to open, carpet cut-outs can be reclaimed more easily, thereby reducing the consumption of natural resources as well as waste volumes and thus CO2 emissions. The environmental  performance of Autoneum’s needlepunch carpets, which already contain a high proportion of recycled PET, is thus further improved.

Moreover, backcoatings without latex improve the sustainability of carpets not only thanks to better recyclability at the end of the product life cycle. Since the application of the thermoplastic adhesive using the innovative ABC process consumes significantly less energy than the production of latexbased backcoatings and does not require any water at all, the environmental impact can already be minimized in the manufacturing process. Additionally, thermoplastic adhesives developed in-house by Autoneum will open up new possibilities in the future for adapting backcoatings to the individual needs of vehicle manufacturers in terms of their acoustic performance, stiffness and abrasion resistance.

Models from various customers in Europe and North America are already equipped with latex-free needlepunch carpets from Autoneum. In the near future, backcoatings with thermoplastic adhesives will also be used for Autoneum’s tufted carpets. Production of the new, even more sustainable generation of tufted carpets is scheduled to start in early 2022.

Trützschler: New Pre-Cleaner CL-X for Cotton (c) Trützschler GmbH & Co. KG
09.07.2021

Trützschler: New Pre-Cleaner CL-X for Cotton

Double the production rate, with lower energy consumption per kilogram of fiber material – that might sound like a contradiction, but the new Trützschler pre-cleaner CL-X makes it possible. It gently and reliably removes coarse contaminants like leaf debris, stalks or seeds from cotton with minimum loss of good fibers. The pre-cleaner CL-X provides more efficiency and lays the foundation for a high-quality end-product before the cotton is further processed in mixers and fine cleaners.

CL-X features at one glance

Double the production rate, with lower energy consumption per kilogram of fiber material – that might sound like a contradiction, but the new Trützschler pre-cleaner CL-X makes it possible. It gently and reliably removes coarse contaminants like leaf debris, stalks or seeds from cotton with minimum loss of good fibers. The pre-cleaner CL-X provides more efficiency and lays the foundation for a high-quality end-product before the cotton is further processed in mixers and fine cleaners.

CL-X features at one glance

  • Continuous production of 1,600 kilograms per hour for present blow room configuration.
  • 30% energy saving compared to the current benchmark.
  • Integrated WASTECONTROL for automatic adjustment recommendation of waste excretion to avoid unnecessary fiber loss.
  • 2.60 m long cleaning section.
  • New and improved grid geometry for better separation and gentle tuft treatment.
  • Material draft due to 10 % higher speed of second opening roller for reliable and consistent fiber transport.
  • Optimal cleaning level and minimal fiber loss due to individual and stepless grid adjustment for each opening roller by motor.
  • Gentle tuft treatment with adjustable opening roller speed.
  • Synchronized lot management (automatic lot change for up to three lots).
  • Connection possibility for a waste box (for waste analysis).
  • Lower cost of ownership.
Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications (c) Hexcel Corporation
07.07.2021

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Source:

Hexcel Corporation / 100% Marketing

05.07.2021

Infinited Fiber Company raises EUR 30 million from new Investors

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fiber Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024.

“We are really happy to welcome our new investors and grateful for the continued support from our older investors,” said Infinited Fiber Company co-founder and CEO Petri Alava. “These new investments enable us to proceed at full speed with the pre-engineering, environmental permits, and the recruitment of the skilled professionals needed to take our flagship project forward. We can now also boost production at our pilot facilities so that we can better serve our existing customers and grow our customer-base in preparation for both our flagship factory and for the future licensees of our technology.”

H&M Group is one of Infinited Fiber Company’s earliest investors. They first invested in Infinited Fiber Company in 2019.

H&M Group has also signed a multiyear sales deal with Infinited Fiber Company to secure its access to agreed amounts of Infinna from the planned flagship factory.

New investor BESTSELLER has struck a similar sales deal with Infinited Fiber Company.

In addition to strong interest by global fashion leaders, the technology has significant promise for major textile fiber producers. Allen Zhang, President of Sateri, said: “Sateri is excited to continue to invest in and collaborate with Infinited Fiber Company as part of our long-term commitment towards closed-loop, circular and climate-positive cellulosic fibers. This financing round marks a major milestone for our collaboration in scaling up next-generation fiber solutions.”

Infinited Fiber Company’s flagship plant preparations are also proceeding on other fronts. Several Nordic and international investment banks have given Infinited Fiber Company proposals on the financing options for the investment.

Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into Infinna, a unique, premium-quality regenerated textile fiber with the natural, soft look and feel of cotton. Infinna is biodegradable and contains no microplastics, and at the end of their life, garments made with it can be recycled in the same process together with other textile waste.

Source:

Infinited Fiber Company

Infinited Fiber and Patagonia seal Multiyear Sales Deal (c) Infinited Fiber Company
28.06.2021

Infinited Fiber Company and Patagonia seal Multiyear Sales Deal

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

In April, Infinited Fiber Company announced plans to build a flagship factory in Finland to meet the growing demand for Infinna from global fashion brands. It is currently supplying customers from its R&D and pilot facilities in Espoo and Valkeakoski, Finland. The planned flagship factory will have an annual production capacity of 30,000 metric tons, which is enough fiber for roughly 100 million T-shirts made with 100% Infinna. Infinited Fiber Company expects to have sold the new factory’s entire output for several years during 2021.

More than 92 million metric tons of textile waste is produced globally every year and most of this ends up in landfills or incinerators. At the same time, textile fiber demand is increasing, with Textile Exchange estimating the global textile fiber market to grow 30% to 146 million metric tons by 2030 from 111 million metric tons in 2019. Infinited Fiber Company’s fiber regeneration technology, which uses cellulose-rich waste streams as its raw material, offers a solution both to stop waste from being wasted and to reduce the burden of the textile industry on the planet’s limited natural resources.

(c) Andritz
28.06.2021

ANDRITZ at ANEX/SINCE 2021

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ANEX/SINCE 2021 in Shanghai, China, from July 22 to 24, 2021. The product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/Wetlace, converting, textile finishing, airlay, recycling, and bast fiber processing.

Among the largest end-use markets for nonwoven products are materials for durable uses. Interior linings for cars, materials for construction, geotextiles, synthetic leathers for clothing and furniture, carpeting, filtration and many other industries rely on the use of nonwovens produced using the needlepunch method.

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ANEX/SINCE 2021 in Shanghai, China, from July 22 to 24, 2021. The product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/Wetlace, converting, textile finishing, airlay, recycling, and bast fiber processing.

Among the largest end-use markets for nonwoven products are materials for durable uses. Interior linings for cars, materials for construction, geotextiles, synthetic leathers for clothing and furniture, carpeting, filtration and many other industries rely on the use of nonwovens produced using the needlepunch method.

ANDRITZ Nonwoven’s processes play a pioneering role in the production of biodegradable materials. For many years, ANDRITZ has offered different processes, like spunlace, Wetlace and Wetlace CP, all with one goal in mind: Elimination of plastic components while maintaining the high quality of the desired product properties. Such processes achieve high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo or linen, without chemical additives results in a 100% sustainable fabric, thus meeting customers’ needs exactly as well as supporting the strong tendency to move away from plastics and synthetics.

The latest development in this field is the ANDRITZ neXline wetlace CP line. This process combines the benefits of two forming technologies (inline drylaid and wetlaid web forming process) with bonding by hydroentanglement. Natural fibers, like pulp or viscose, can be processed smoothly and generate a high-performance and cost-efficient wipe that is fully biodegradable and plastic-free.

More information:
Andritz Andritz Nonwoven ANEX
Source:

Andritz

Lenzing supports school competition on circular economy and climate protection (c) Lenzing
VCÖ BRG SolarCity Linz Gruppenfoto
22.06.2021

Lenzing supports school competition on circular economy and climate protection

  • Excellent project to encourage ingenuity among young students
  • Experiment on biodegradability of textiles and nonwovens produces impressive results
  • EUR 30,000 in prize money for a total of 209 participating schools in and outside Austria
  • Lenzing views supporting these kinds of projects as part of its sustainability mission

Lenzing – The Association of Chemistry Teachers in Austria – known by its German abbreviation, VCÖ – has been holding project competitions that thrill students and take them beyond the traditional syllabus for 30 years. Every two years, it highlights a key topic for ninth- and tenth-graders to explore by conducting special experiments and learning from their observations and conclusions.

  • Excellent project to encourage ingenuity among young students
  • Experiment on biodegradability of textiles and nonwovens produces impressive results
  • EUR 30,000 in prize money for a total of 209 participating schools in and outside Austria
  • Lenzing views supporting these kinds of projects as part of its sustainability mission

Lenzing – The Association of Chemistry Teachers in Austria – known by its German abbreviation, VCÖ – has been holding project competitions that thrill students and take them beyond the traditional syllabus for 30 years. Every two years, it highlights a key topic for ninth- and tenth-graders to explore by conducting special experiments and learning from their observations and conclusions.

This year, the 16th installment of the competition is called, “Achieving a cleaner climate and a circular economy with chemistry”. These topics are also near and dear to the heart of globally active fiber manufacturer Lenzing. That’s why the company promptly announced that it was prepared to support this project competition in several different ways. First, Lenzing made a contribution toward the sponsorship fund totaling EUR 30,000. Second, it initiated a special prize on biodegradability – a topic of growing importance given the huge challenges involved in reducing plastic waste. Finally, Lenzing placed a recognized expert at the students’ disposal to provide assistance and answer questions: Michaela Kogler, Project Manager Nonwovens & Technical Products.

Teaming up with rainworms

Two teams were tasked with biodegrading different fibers – just like those used to produce textiles and nonwovens – with the active participation of worms. Students at BRG solarCity in Linz buried fiber nonwovens, a basic material used in wet wipes and other products, in soil that was populated with numerous rainworms, while students at Vöcklabruck Junior High School for Sports and Integration layered textiles into a vermicomposting bin. Both experiments intended to determine the extent to which certain materials would biodegrade quickly. As it turned out, both projects showed that wood-based fibers, like those that Lenzing manufactures for the textile and nonwoven industry, break down very rapidly into natural constituents that swiftly pass into the soil. In contrast, fossil-based plastics such as polyester or polyethylene cannot be decomposed by worms or bacteria but remain in the soil, sometimes for hundreds of years.

The prizes for this year’s competition were awarded on June 11. The competition attracted entries from no fewer than 209 schools, including 11 from outside Austria. For more information on the projects and the winners, visit www.vcoe.or.at.

World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta (c) WOW
WOW 2021
21.06.2021

Nonwovens Industry Demonstrates Readiness to Return to Business In-Person

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

The three-day conference will deliver the latest insights and material science developments in key areas for business growth in this vital market with themes focused on sustainability issues, the impact of COVID-19 on consumer wipes, regulatory trends, flushability and more.

WOW 2021 Highlights

July 12 – The learning gets started with the separate one-and-a-half-day WIPES Academy led by Chris Plotz, INDA Director of Education and Technical Affairs, providing critical training on research, development and manufacturing of wipes. WOW 2021 will officially kick off with an evening welcome reception in the Marriott’s Imperial Foyer.

July 13 – WOW attendees are greeted by INDA’s President, Dave Rousse. The compelling conference program gets underway with the following sessions:

  • Wipes and the Growing Plastics Debate
  • Government Affairs Update 
  • The Confusing World of Regulations Impacting the Disinfecting and Sanitizing Wipes
  • Presentations by the three finalists for the World of Wipes Innovation Award® – Kimberly-Clark Scott Sanitizing Wipes, Lenzing™ Lyocell Skin fibers and Shark

July 14 – Industry-leading experts will present on thought-provoking topics related to wipes trends, innovations, sustainable packaging and the impact of COVID-19 during this packed second day. Among the not-to-be-missed sessions are:

  • Trends in the Wipes Market and Among Consumers
  • Innovation in Wet Wipe Preservatives
  • COVID-19 Impact on Wipes Consumption and Cleaning Habits
  • Sustainable Packaging and Dispensing for Wipes 

July 15 – Sustainability will be a headliner for this third day as well as the presentation of INDA’s prestigious award for innovation.

  • Nonwoven Substrates for More Sustainable Wipes
  • Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities

In addition to the strong conference content, at least 50 companies will exhibit their products and services during two evenings of one-and-a-half-hour tabletop exhibitions with networking receptions.

WOW 2021 will conclude with the exciting announcement of the World of Wipes Innovation Award® by Dave Rousse.

In addition to the live component, a conference recording will be available on demand two weeks after the event. INDA maintains its commitment to adhering to all CDC protocols and guidelines for a safe event. For the full event details, visit the WOW website.

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer