From the Sector

Reset
219 results
26.01.2024

Stahl expands ZDHC level 3-certified portfolio

Stahl has achieved Zero Discharge of Hazardous Chemicals (ZDHC) MRSL 3.1 Gateway certification for 2,151 products in its portfolio. This achievement underlines Stahl’s ongoing commitment to the ZDHC mission of achieving high standards for sustainable chemical management.

ZDHC certification enables companies working in the footwear, apparel and accessories value chains to demonstrate their commitment to responsible chemical management, with the ultimate goal being zero discharge of hazardous chemicals. Level 3 certification represents the highest level of conformity with the ZDHC certification programme. To achieve this, Stahl’s formulated chemical products and raw materials were verified and tested against ZDHC’s latest Manufacturing Restricted Substances List (MRSL 3.1) by Eurofins | Chem-MAP®. The Chem-MAP® programme was also used to audit the chemical management and stewardship processes at three of Stahl’s manufacturing sites.

 

Stahl has achieved Zero Discharge of Hazardous Chemicals (ZDHC) MRSL 3.1 Gateway certification for 2,151 products in its portfolio. This achievement underlines Stahl’s ongoing commitment to the ZDHC mission of achieving high standards for sustainable chemical management.

ZDHC certification enables companies working in the footwear, apparel and accessories value chains to demonstrate their commitment to responsible chemical management, with the ultimate goal being zero discharge of hazardous chemicals. Level 3 certification represents the highest level of conformity with the ZDHC certification programme. To achieve this, Stahl’s formulated chemical products and raw materials were verified and tested against ZDHC’s latest Manufacturing Restricted Substances List (MRSL 3.1) by Eurofins | Chem-MAP®. The Chem-MAP® programme was also used to audit the chemical management and stewardship processes at three of Stahl’s manufacturing sites.

 

Source:

Stahl

22.01.2024

Adient again ranked as Top Employer

Adient, a leader in automotive seating, has been certified for the second time by the Top Employers Institute as a European Top Employer for several of its EMEA locations.
 
23 of the automotive supplier’s locations in the Czech Republic, Hungary, North Macedonia, Poland, Romania, and Serbia underwent an extensive assessment by the institute and were evaluated in categories such as People Strategy, Work Environment, Talent Acquisition, Learning, Diversity & Inclusion, Wellbeing and more. All six assessed markets obtained the certification, having already done so in last year’s edition.
 
While the organization’s overall score improved by 4.5% compared to 2023, Adient stands out the most from its competitors in the areas of People Strategy and DE&I practices, at 11% and 7%, respectively.

The Top Employers Certification Program has been created to provide guidance on people practices of employers in a wide range of industries. It evaluates companies worldwide and provides feedback on their working culture based on a best practice survey.

Adient, a leader in automotive seating, has been certified for the second time by the Top Employers Institute as a European Top Employer for several of its EMEA locations.
 
23 of the automotive supplier’s locations in the Czech Republic, Hungary, North Macedonia, Poland, Romania, and Serbia underwent an extensive assessment by the institute and were evaluated in categories such as People Strategy, Work Environment, Talent Acquisition, Learning, Diversity & Inclusion, Wellbeing and more. All six assessed markets obtained the certification, having already done so in last year’s edition.
 
While the organization’s overall score improved by 4.5% compared to 2023, Adient stands out the most from its competitors in the areas of People Strategy and DE&I practices, at 11% and 7%, respectively.

The Top Employers Certification Program has been created to provide guidance on people practices of employers in a wide range of industries. It evaluates companies worldwide and provides feedback on their working culture based on a best practice survey.

Teams from Lonati, Lubrogamma and Vickers during a recent meeting at the Vickers HQ in Leeds, UK. Photo: AWOL
Teams from Lonati, Lubrogamma and Vickers during a recent meeting at the Vickers HQ in Leeds, UK.
15.01.2024

Vickers Oils: Reliable running for Lonati’s knitting machines

BTMA member Vickers Oils has marked an important milestone in its partnership with knitting machinery leader Lonati by earning Original Equipment Manufacturer (OEM) approval for its VICKERLUBE SOCK 46 needle oil.

VICKERLUBE SOCK 46 is a mineral-based needle lubricant designed to meet the criteria for modern knitting machine technology. It provides a high standard of lubrication as well as holding very good stability properties and having a high resistance to oxidation. The product is readily scourable and holds a well-balanced additive system meaning that it is fully compatible with all machine components. It can also be used with machines producing any yarn type – including tricky elastanes – to produce the highest quality end product.

Lonati, headquartered in Brescia, Italy, has been a prominent name in knitting machines for over 70 years, designing and manufacturing an impressive average of 8,000 annually. It places a strong emphasis on delivering the highest quality textile machinery, underpinned by a commitment to research and development that ensures the use of cutting-edge products, technologies and processes in its machines.

BTMA member Vickers Oils has marked an important milestone in its partnership with knitting machinery leader Lonati by earning Original Equipment Manufacturer (OEM) approval for its VICKERLUBE SOCK 46 needle oil.

VICKERLUBE SOCK 46 is a mineral-based needle lubricant designed to meet the criteria for modern knitting machine technology. It provides a high standard of lubrication as well as holding very good stability properties and having a high resistance to oxidation. The product is readily scourable and holds a well-balanced additive system meaning that it is fully compatible with all machine components. It can also be used with machines producing any yarn type – including tricky elastanes – to produce the highest quality end product.

Lonati, headquartered in Brescia, Italy, has been a prominent name in knitting machines for over 70 years, designing and manufacturing an impressive average of 8,000 annually. It places a strong emphasis on delivering the highest quality textile machinery, underpinned by a commitment to research and development that ensures the use of cutting-edge products, technologies and processes in its machines.

Vickers Oils, based in Leeds, West Yorkshire, shares these values, leading the industry in quality and assurance through its continuous focus on research and development, technological leadership, quality control and customer service. As it has done for almost two centuries – the company will mark its 200th anniversary in 2028.

Lonati is now officially recommending VICKERLUBE SOCK 46 for use in its single-cylinder GOAL series of knitting machines, marking a successful collaboration that required dedicated efforts from the teams of Lonati, Vickers Oils and its Italian representative Lubrogamma. Vickers Oils is committed to sustainable product development and VICKERLUBE SOCK 46 meets the clearly defined criteria set out by the Global Organic Textile Standard (GOTS) and conforms to ZDHC MRSL Level 1 certification.

Source:

AWOL Media

Vesta Corporation presented first Sustainability Report (c) Vesta Corporation
05.01.2024

Vesta Corporation: First Sustainability Report

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

To draft this Report, reference was made to the “Global Reporting Initiative Sustainability Reporting Standards” established by the Global Reporting Initiative (GRI). The information in the balance sheet refers to the year 2022 (from 1 January to 31December 2022). Wherever possible, data for the previous year are included, to allow for a comparison of data over time and to assess the trend of Vesta activities. Sustainability is an objective-driven process. This means that comparing data allows for concretely measuring the company’s progress, as it pursues this accounting process year after year.

The improvement actions already implemented by Vesta involve corporate responsibility from an environmental, social and governance perspective. An example are the improved heating and processing plants (which entails the construction of a new tumbling department based on 4.0 technology). This guarantees significant energy, water and economic savings. Along with numerous corporate certifications, the company has passed the Raw Material Traceability test with a score of EXCELLENT, as well as the Carbon and Water footprint analysis.

As confirmation of its commitment to improving corporate performance levels, Vesta has been upgraded from BRONZE (2020) to GOLD in 2023, as assessed by the Leather Working Group (which measures leather manufacturers’ environmental performance for ecological production and for a systemic management of quality, environmental, safety and ethical factors).

Becoming energy-independent is a major step in the pipeline, involving the installation of a photovoltaic plant. This is complemented by the implementation of a project aimed at totally compensating its CO2 emissions for the year subject to accounting and certification. This neutrality will be achieved through the acquisition of credits deriving from projects certified by the United Nations. For example, with the construction of an important hydro-electric plant to which Vesta is contributing. With regard to production, corporate research is currently focused on developing solutions to reduce water and energy use. It is also implementing circular trends by adopting an increasing number of bio-based products, to guarantee the most sustainable end-of-life and waste management for its products.

Source:

Vesta Corporation

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

Photo: Archroma
15.12.2023

Archroma unveils SuperSystems+ at ChromaTexChem 2023

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Super Systems+ leverages the industry’s broadest product portfolio and authentic evidence-based data to support informed decision making. It is supported by The SafeEdge by Archroma, an online portal that gives Archroma customers and brands real-time access to product-related regulatory and compliance certifications and information, as well as the Archroma ONE WAY Impact Calculator, a process simulation and calculation tool designed and used by our textile processing experts to provide our customers and partners with an accurate estimate of the process costs, resource utilization, effluent discharge quality, and CO2 emissions of the existing production process and of the newly evaluated system. These help them to select solutions that meet their performance requirements and deliver against significant sustainability targets.

Source:

Archroma

11.12.2023

GOTS Pilot Project for Small Operators to attain Certification

In an initiative aimed at enhancing accessibility to certification for small operator groups within the organic textile value chain, the Global Organic Textile Standard (GOTS) is pleased to introduce its ongoing Controlled Supply Chain Scheme Pilot Project. The project, launched in 2022, was strategically developed to overcome the obstacles that often deter small-scale operators from pursuing GOTS certification.

Recognising that administrative complexities and financial burdens can impede these operators, the controlled supply chain scheme (CSCS) system was developed to mitigate these challenges. The supply chain requires an internal control and audit system, and small-scale operations benefit from a streamlined ‘group’ certification process, which reduces costs and eases administrative barriers.

In an initiative aimed at enhancing accessibility to certification for small operator groups within the organic textile value chain, the Global Organic Textile Standard (GOTS) is pleased to introduce its ongoing Controlled Supply Chain Scheme Pilot Project. The project, launched in 2022, was strategically developed to overcome the obstacles that often deter small-scale operators from pursuing GOTS certification.

Recognising that administrative complexities and financial burdens can impede these operators, the controlled supply chain scheme (CSCS) system was developed to mitigate these challenges. The supply chain requires an internal control and audit system, and small-scale operations benefit from a streamlined ‘group’ certification process, which reduces costs and eases administrative barriers.

Under the CSCS framework, a supply chain comprised of a minimum of eight and a maximum of thirty small-scale facilities, each with twenty or fewer workers, could be considered a single Certified Entity after a comprehensive risk assessment by their Certification Body (CB). SANKEI MERIYASU, a Japanese textile manufacturer, recently received GOTS certification through this project. SANKEI MERIYASU's success showcases the tangible impact of the CSCS system in empowering small-scale operators.

With the pilot due to be reviewed and evaluated next year, GOTS Managing Director Rahul Bhajekar is optimistic about the future of CSCS systems within GOTS. "The controlled supply chain scheme has the potential for substantial impact, empowering small operators in the organic textile supply chain and revolutionising GOTS certification. Our pilot project is proving that the scheme works as intended, overcoming barriers and expanding opportunities. We look forward to refining and validating the CSCS requirements, in hopes of implementing it fully for all markets in the future.”

More information:
GOTS certification
Source:

GOTS - Global Organic Textile Standard

11.12.2023

OETI PPE customers awarded OEKO-TEX® STeP certification

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

For the Austrian company Ötscher – Berufskleidung (workwear), Managing Director Thiemo Götzl emphasises the strengths of the certification in transparent communication with customers and stakeholders and a comprehensive overview of all aspects of the supply chain. "The certification also supports compliance with the German Supply Chain Due Diligence Act requirements through transparency and risk mitigation," says Thiemo Götzl.

Source:

OETI - Institut für Oekologie, Technik und Innovation GmbH

ACTIVEYARN book (c) Suedwolle Group
05.12.2023

Suedwolle Group: New ACTIVEYARN® collection

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

Suedwolle Group introduces ACTIVEYARN®, the company’s first seasonless corporate collection: ACTIVEYARN® is composed of a selection of weaving, flat and circular knitting, hosiery and technical yarns, with advanced spinning technologies, wool blends and other natural and traceable fibres. It is a seasonless collection of yarns suitable for different occasions, to support everyone’s attitude and style.

This idea is expressed by the concept of “Get active”, which is not just about using Suedwolle Group’s products in sports applications, but about a new mindset, a changing perspective. By taking a fresh look at the company’s wide offer, ACTIVEYARN® provides new opportunities and inspiration to explore Suedwolle Group’s full potential in terms of technology, sustainability and innovations. It considers with a new point of view on the collections for knitting, weaving and technical uses, creating new connections among them and offering a mosaic of new possibilities and versatile combinations.

This theme of the collection and the new mindset may be represented in the concept of a “kaleidoscope”, symbol of the active change inspiring Suedwolle Group’s creativity.

The yarns in the ACTIVEYARN® collection embody the company’s six strategic pillars of innovation – sustainability, circularity, traceability, design, performance and technology – drivers of the entire process of design and production.

Jasmin GOTS Nm 2/48 (100% wool 19,5 μ X-CARE) is a natural, renewable and biodegradable yarn with GOTS certification that meets the company’s demand for sustainability. X-CARE, the innovative treatment by Suedwolle Group, uses eco-friendly and chlorine-free substances that make wool environmentally friendly and suitable for easy-care quality.

Tirano Betaspun® RWS FSC (41,5% wool 17,2 μ TEC RWS certified, 41,5% LENZING™Lyocell 1,4 dtex 17% polyamide filament 22 dtex GRS certified) is a fully traceable high performance yarn, suitable for sportswear and activewear.

OTW® Midway GRS Nm 2/60 (60% wool 23,5 μ X-CARE, 40% polyamide 3,3 dtex GRS certified) comes from the recycling of pre-consumer polyamide and thus is a perfect example of circular production. Suitable for weaving, it combines the added performance that comes from our OTW® patented technology applied to a high durability blend, ideal for active garments.

Wallaby Betaspun® Nm 1/60 (87,5% wool 18,4 μ TEC, 12,5% polyamide filament 22 dtex) is the result of application of latest-generation Betaspun® technology to a natural fibre like wool, allowing production of fine yarns with extra strength and abrasion resistance, ideal for seamless and wrap knitting.

Banda TEC X-Compact Nm 2/47 (100% wool 17,2 μ TEC) is a 100% natural, renewable and biodegradable yarn benefitting from the innovative X-Compact, permitting production of particularly linear yarns ideal for clean design and fabrics appropriate for today’s fashions.

Caprera GRS Nm 1/60 (45% wool 19,3 μ Non mulesed X-CARE 55% COOLMAX® EcoMade polyester 2,2 dtex GRS certified) increases the performance of the wool-based non mulesed fibre through combination with COOLMAX® EcoMade polyester. This is a material coming from recycling of post-consumer PET bottles, dyeable at low temperatures, that aids evaporation of moisture from the skin to maintain stable body temperature, enhancing the comfort of activewear and urban garments.

Source:

Suedwolle Group

Freudenberg´s comfortemp® FIBERBALL WB Series © Freudenberg Performance Materials
Freudenberg´s comfortemp® FIBERBALL WB Series
26.10.2023

Freudenberg launches sustainable, low-level BPA thermal insulation products

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

Freudenberg Performance Materials Apparel (Freudenberg) launches two advanced thermal insulation products made from low-level Bisphenol A (BPA) recycled PET fibers (rPET) into the global range of comfortemp®, Freudenberg’s thermal insulation brand.

The additions of DOWN FEEL WA 150LB and FIBERBALL WB 400LB to the comfortemp® global range serve as high-quality and ecologically-minded alternatives to down, enhancing the comfort and sustainability of your garments. DOWN FEEL WA 150LB is an extremely-lightweight, loose fiber thermal insulation with a super-light loft, while FIBERBALL WB 400LB uses clusters of extra-fine fibers to offer optimal breathability, maximum comfort, and minimal clumping after washing and drying.

GRS-certified and OEKO-TEX® STANDARD 100 Class I certifications
Both products utilize 100% GRS-certified rPET fibers, customizable to any desired fill levels. Additionally, these new products not only comply with but significantly surpass the stringent OEKO-TEX® STANDARD 100 Class I certifications. While OEKO-TEX® categorizes low-level BPA as less than 100 parts per million (ppm), these new products contain less than 1 ppm BPA, a testament to Freudenberg’s unyielding standards.

DOWN FEEL WA 150LB and FIBERBALL WB 400LB are available globally and more low-level BPA thermal insulation options are available in Asia.

Source:

Freudenberg Performance Materials

12.10.2023

OETI offers ZDHC training for India's textile and leather industry

OETI, a Member of TESTEX Group, is an official ZDHC Approved Solution Provider under the ZDHC Roadmap to Zero Programme. Expanding beyond its existing role as a ZDHC Approved MRSL Certification Body for OEKO-TEX® ECO PASSPORT around the globe, OETI now offers comprehensive ZDHC training services in India.

The ZDHC (Zero Discharge of Hazardous Chemicals) Roadmap to Zero Programme drives sustainable chemical management in the global textile, apparel, leather, and footwear sectors. OETI's ZDHC training services empower brands, manufacturers, and other ZDHC stakeholders to master sustainable chemical management, adopting ZDHC guidelines, platforms, and solutions.

This programme delivers a comprehensive understanding of chemical management systems (CMS) and their practical implementation within the textile and leather industries. Targeting various organisational departments, including management, chemical teams, procurement, compliance, and sustainability, this training fosters collaboration within the departments regarding sustainable chemical management.

OETI, a Member of TESTEX Group, is an official ZDHC Approved Solution Provider under the ZDHC Roadmap to Zero Programme. Expanding beyond its existing role as a ZDHC Approved MRSL Certification Body for OEKO-TEX® ECO PASSPORT around the globe, OETI now offers comprehensive ZDHC training services in India.

The ZDHC (Zero Discharge of Hazardous Chemicals) Roadmap to Zero Programme drives sustainable chemical management in the global textile, apparel, leather, and footwear sectors. OETI's ZDHC training services empower brands, manufacturers, and other ZDHC stakeholders to master sustainable chemical management, adopting ZDHC guidelines, platforms, and solutions.

This programme delivers a comprehensive understanding of chemical management systems (CMS) and their practical implementation within the textile and leather industries. Targeting various organisational departments, including management, chemical teams, procurement, compliance, and sustainability, this training fosters collaboration within the departments regarding sustainable chemical management.

More information:
ZDHC chemicals OETI Training
Source:

OETI

Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

22.09.2023

Lenzing receives EU Ecolabel for fiber production in Indonesia

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group has received certification from the internationally recognized EU Ecolabel for its fibers at the Indonesian site. This means that Lenzing fibers produced in Purwakarta (PT. South Pacific Viscose) meet high environmental standards. The product portfolio thus expands and qualifies for the production of LENZING™ ECOVERO™ brand fibers for textiles and VEOCEL™ brand fibers for nonwoven applications.

The substantial investment of EUR 100 mn to modernize the Indonesian site has enabled Lenzing to significantly reduce its specific emissions. In addition, the site recently began sourcing energy from renewable sources and is driving the conversion to biomass in line with Lenzing's goals of reducing group-wide carbon emissions per ton of product sold by 50 percent by 2030 and achieving carbon-neutral production by 2050.

Anthropogenic climate change is one of the most pressing problems of our time, to which both the global textile and nonwovens industries make a major contribution. LENZING™ ECOVERO™ viscose fibers (for textiles) and VEOCEL™ Viscose (for nonwovens) have been proven to cause significantly less greenhouse gas emissions and water pollution than conventional viscose. At the Indonesian site, Lenzing also plans to produce the innovative LENZING™ ECOVERO™ Black fibers in the future, which also require less energy and water in textile chain thanks to the spun-dyeing process and thus also have a lower carbon footprint in their life cycle as a textile product.

Source:

Lenzing Group

Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

01.09.2023

OEKO-TEX® Annual Report 2022/2023: 21% growth

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

For their two new certifications, OEKO-TEX® focused on cooperation with numerous parties along the global supply chain. Launched in November 2022, OEKO-TEX® RESPONSIBLE BUSINESS addresses the increasing global expectations and due diligence requirements. The tool and certification supports textile and leather companies in preventing negative effects from their own business operations, supply chains and broader business relationships. Companies working with OEKO-TEX® ORGANIC COTTON benefit from a global network of certified companies to facilitate sourcing of chemicals, materials and business partners - from cultivation to finished product.

At the organisational level, OEKO-TEX® is focusing on partnerships with multi-stakeholder initiatives to include as many different perspectives as possible and allow all parties to benefit. Working with ZDHC to promote sustainable chemical management and becoming an ISEAL community member are just two of many collaborations for OEKO-TEX®, which is striving to address the industry's most pressing challenges.

Meanwhile, the Association’s core business advances. For example, based on industry developments and scientific findings, OEKO-TEX® issued a general ban on the use of per- and polyfluorinated alkyl substances (PFAS/PFC) in textiles, leather and shoes certified by STANDARD 100, ORGANIC COTTON, LEATHER STANDARD and ECO PASSPORT. OEKO-TEX® also surpassed the milestone of 1,000 STeP certified production facilities. OEKO-TEX® is in a strong position to continue its work - enabling the industry and consumers to make more responsible decisions through partnership and education.

Source:

Oeko-Tex GmbH

31.08.2023

Lenzing's Indonesian site turns into a supplier of specialty viscose fibers

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

“Demand for specialty fibers with low environmental impacts continues to grow structurally. We see enormous growth potential in Asia in particular. Through our investments in Indonesia and also at other Lenzing sites worldwide, we are in a better position to serve this growing demand. At the same time, we continue working tirelessly to make the industries in which we operate even more sustainable and to drive the transformation of the textile business model from linear to circular,” says Stephan Sielaff, Chief Executive Officer of the Lenzing Group.

More information:
Lenzing speciality fibers indonesia
Source:

Lenzing AG

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

OETI purchases ECS to expand its PPE portfolio photo: OETI
12.07.2023

OETI purchases ECS to expand its PPE portfolio

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

ECS tests and evaluates occupational health and safety goggles with and without a filter action, passive and active switching protection filters and shields for welders, and laser protection filters, goggles, and shields. The company also tests the optical properties of sunglasses, sports glasses, ski goggles, swimming goggles and motorbike goggles.

With OETI’s takeover, the ECS location in Aalen is retained, and all employees will continue working at ECS. The new Managing Director of ECS GmbH as of 1 July 2023 is Dipl.-Ing. Rolf Diebolder.

‘We are present on the European market, on the American market and, via a representative office, on the Chinese market. With the aid of the new distribution channels through OETI and TESTEX, we want to steadily advance ECS’ expansion and be present on all five continents’, says Managing Director Rolf Diebolder, explaining his strategic plans for ECS. ‘I would like OETI and ECS to develop a joint strategy in order to be able to offer existing and new customers of both companies a complete package which, when combined, will give us a unique selling point in the marketplace’, says Diebolder.

Diebolder also sees further potential in the cooperation with regard to protective laser clothing. According to him, this is where the laser laboratory commissioned by ECS could be used to make textiles laser-safe. In the future, there will be more and more ‘hand-held’ devices, i.e. laser welding devices, for which gloves and protective jackets are needed.

Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

ERCA successfully showcased latest product at ITMA 2023 (c) ERCA
Giusy Bettoni, Matt Swartz, Fabio Locatelli and Mike Maekawa after the talk
28.06.2023

ERCA successfully showcased latest product at ITMA 2023

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

The process of sharing REVECOL® with the industry really started with the announcement of ERCA’s partnership with Patagonia® and YKK and deepened during the session Upcycling Minds Think Alike moderated by Giusy Bettoni, CEO and Founder, C.L.A.S.S. (Creativity, Lifestyle and Sustainable Synergy), and which saw the participation of Matt Swartz, Color and Material Quality Manager of Patagonia®, Fabio Locatelli, Head of ERCA, Textile Specialties Business Unit and Mike Maekawa, Sales and Business Development Manager, YKK Vietnam.

Source:

ERCA

21.06.2023

Renewcell achieves Recycled Claim Standard certification

CIRCULOSE® production at Renewcell 1, Ortviken has been certified to Recycled Claim Standard (RCS) version 2.0. The RCS is an international, voluntary standard that sets requirements for third-party certification of recycled input and chain of custody. The primary goal of the RCS is to increase the use of recycled materials.

Building off previous RCS certification of the CIRCULOSE® pulp at the Kristinehamn recycling plant, this achievement further solidifies Renewcell’s mission to change the global textile industry and make it circular and sustainable.

The CIRCULOSE® pulp process conforms to the RCS 100 standard developed by Textile Exchange, a global non-profit organization advancing preferred fibers and materials.

A recycled content claim can only be made for materials that have been recovered or otherwise diverted from the solid waste stream. The certification process requires partners to comply with standards at every step of the supply chain, starting with the raw material (or recycling) suppliers and ending with the end seller in a business-to-consumer transaction.

CIRCULOSE® production at Renewcell 1, Ortviken has been certified to Recycled Claim Standard (RCS) version 2.0. The RCS is an international, voluntary standard that sets requirements for third-party certification of recycled input and chain of custody. The primary goal of the RCS is to increase the use of recycled materials.

Building off previous RCS certification of the CIRCULOSE® pulp at the Kristinehamn recycling plant, this achievement further solidifies Renewcell’s mission to change the global textile industry and make it circular and sustainable.

The CIRCULOSE® pulp process conforms to the RCS 100 standard developed by Textile Exchange, a global non-profit organization advancing preferred fibers and materials.

A recycled content claim can only be made for materials that have been recovered or otherwise diverted from the solid waste stream. The certification process requires partners to comply with standards at every step of the supply chain, starting with the raw material (or recycling) suppliers and ending with the end seller in a business-to-consumer transaction.

Source:

Re:NewCell AB