From the Sector

Reset
111 results
31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

Photo: Messe Frankfurt (HK) Ltd.
29.09.2022

Cinte Techtextil China returns this December

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

Following its deferral earlier this year, organisers announced that Cinte Techtextil China 2022 will take place from 7 – 9 December at the National Exhibition and Convention Center, Shanghai. The coming edition will address the latest trends, technologies and applications that are shaping the industry and market in the region.

“We are excited that Cinte Techtextil China is going ahead this year,” said Ms Wilmet Shea, Deputy General Manager of Messe Frankfurt (HK) Ltd. “The technical textiles and nonwovens sectors are constantly innovating, and congregating regularly to share new materials and knowledge is essential for the industry. For this reason, this year’s fair has attracted international and domestic exhibitors from Austria, Belgium, Mainland China, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US to grow their business in the enticing Chinese market.”

The Chinese market performance has remained strong amidst the pandemic. According to the China Nonwovens & Industrial Textiles Association (CNITA), China’s nonwovens output has an average two-year growth rate of 14.8% despite the decreased demand for anti-pandemic materials. In addition, China strengthened its position as one of the key drivers of the global technical textiles market due to the rapid expansion of the automotive sector in the country which stimulates high demand for technical textiles.
To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations.

The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd.

Im Projekt »InKa« wird die Wertschöpfungskette von Kaffeesatz erforscht.
20.09.2022

Fraunhofer UMSICHT: Neue biobasierte und zirkuläre Kunststoffe auf der K 2022

Für den ressourceneffizienten Einsatz von Kunststoffen entwickelt Fraunhofer UMSICHT neue Werkstoffe. Im Fokus stehen dabei Biokunststoffe, eine zirkuläre Kunststoffwirtschaft sowie Strategien zur Reduzierung von Makro- und Mikroplastik in der Umwelt. Fraunhofer UMSICHT präsentiert sich auf der K 2022 mit chemischen Zwischenprodukten aus Kaffeesatz, Folienwerkstoff auf Basis von TPU, PLA-Compounds für technische Bauteile mit erhöhtem Brandrisiko und abbaubaren Mulchfolien.

Für den ressourceneffizienten Einsatz von Kunststoffen entwickelt Fraunhofer UMSICHT neue Werkstoffe. Im Fokus stehen dabei Biokunststoffe, eine zirkuläre Kunststoffwirtschaft sowie Strategien zur Reduzierung von Makro- und Mikroplastik in der Umwelt. Fraunhofer UMSICHT präsentiert sich auf der K 2022 mit chemischen Zwischenprodukten aus Kaffeesatz, Folienwerkstoff auf Basis von TPU, PLA-Compounds für technische Bauteile mit erhöhtem Brandrisiko und abbaubaren Mulchfolien.

Forschende des Fraunhofer UMSICHT gewinnen im Projekt »InKa«, das die Wertschöpfungskette von Kaffeesatz erforscht, aus dem ungenießbaren Kaffeeöl ein chemisches Zwischenprodukt, das bei der Herstellung von Additiven für Kunststoffe zum Einsatz kommt. Den entölten Kaffeesatz versuchen sie, als alternativen Rohstoff für die Papier- und Kartonindustrie zu nutzen. »Eine besondere Herausforderung bei unserem Projekt ist das Scale-up der Verfahrensschritte vom Labor zur industriellen Fertigung. Das angestrebte Verfahren als Ganzes ist hoch innovativ und leistet einen wichtigen Beitrag bei der Nutzung von biobasierten Rohstoffen im Rahmen der Bioökonomie. Im Labormaßstab sehen wir bereits, dass unser Konzept aufgeht: Wir konnten die entwickelten Additive bereits in neuen Werkstoffrezepturen testen«, erklärt Inna Bretz, Abteilungsleiterin Zirkuläre und Biobasierte Kunststoffe des Fraunhofer UMSICHT.

Röntgendetektierbare Mehrwegschutzbekleidung
Die Entwicklung eines Folienwerkstoffs auf Basis von thermoplastischen Polyurethanen (TPU) und röntgendetektierbaren Additiven war das Ziel des Projekts »DetekTPU«. Bei der Produktion von Nahrungsmitteln ist Einwegschutzbekleidung zu tragen, um Sicherheits- und Hygienevorschriften einzuhalten. Neben einer großen Mengen Plastikmüll ergibt sich dabei zusätzlich das Problem, dass Teile der Schutzbekleidung in den Nahrungsmitteln landen können und dort nicht detektiert werden. Der entwickelte Werkstoff soll für zuverlässig röntgendetektierbare Mehrwegschutzbekleidung eingesetzt werden. Dies ist für dünne Kunststofffolien eine bisher nicht gelöste Herausforderung. »Die bisherigen Projektergebnisse sind vielversprechend, aktuell planen wir weitere Entwicklungsschritte mit unserem Projektpartner. Hierzu soll das Team um Experten aus dem Bereich Folienherstellung erweitert werden.«  berichtet Christina Eloo, Gruppenleiterin Kunststoffentwicklung.

Biobasierte Kunststoffe für technische Bauteile mit erhöhtem Brandrisiko
Technische Bauteile mit erhöhtem Brandrisiko, etwa in der Elektronikindustrie, erfordern flammgeschützte, wärmeformbeständige und schlagzähe Kunststoffe. Ein Großteil davon wird auf Erdölbasis hergestellt, dessen Vorräte begrenzt sind. Biokunststoffe erreichen jedoch oftmals noch nicht im vollen Umfang das vom Markt geforderte Eigenschaftsniveau konventioneller technischer Kunststoffe. Die Grenzen liegen insbesondere beim Brandverhalten, einer ausreichenden Temperaturbeständigkeit oder Schlagzähigkeit. Hier setzt »TechPLAstic« an: Es werden PLA-Compounds für langlebige Produkte anwendungs- und marktnah entwickelt - unter Berücksichtigung der jeweiligen Anforderungen und Kosten. Der Anwendungsfokus liegt zunächst auf technischen Produkten des Elektronik- und Bausektors wie beispielsweise Leuchten oder Schalter und Tasten in der Gebäudetechnik.

Mulchfolien mit angepasster Abbaubarkeit
Biologisch abbaubare Kunststoffe sind in umweltoffenen Anwendungen sinnvoll, bei denen ein Recyclingprozess nicht möglich oder mit einem zu hohen Aufwand verbunden ist. Beispiele hierfür sind Geotextilien oder Mulchfolien. Fraunhofer UMSICHT forscht an Kunststoffen mit angepasster Abbaubarkeit, die während der Nutzungsdauer die gewünschten Eigenschaften erfüllen. Zur Untersuchung und Bewertung der Eigenschaftsänderungen von Kunststoffen während der Alterung durch Umwelteinflüsse werden durch die Forschenden im Labor die Bedingungen so anwendungsnah wie möglich eingestellt. Dazu können je nach Produkt verschiedene Substrate (Kompost, Erde, Wasser), verschiedene Temperaturen und UV-Licht eingesetzt werden.
 
Förderhinweise

  • Das Projekt »InKa – Intermediate aus industriellem Kaffeesatz« wird im Rahmen der Fördermaßname »Nationalen Forschungsstrategie BioÖkonomie 2030« der Bundesregierung durch das Bundesministerium für Bildung und Forschung (BMBF) gefördert.
  • Das Projekt »DetekTPU« wird vom Bundesministerium für Wirtschaft und Energie aufgrund eines Beschlusses des Deutschen Bundestages gefördert.
  • Das Projekt »TechPLAstic« wird durch die Fachagentur Nachwachsende Rohrstoffe e. V. (FNR) und aus Mitteln des Bundesministeriums für Ernährung und Landwirtschaft (BMEL) gefördert.
(c) Fraunhofer CCPE
19.09.2022

Fraunhofer CCPE on the way to an international circular plastics economy

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

In a circular plastics economy, resources can be saved, products can be intelligently designed for long service life, and end-of-life losses can be reduced. Systemic, technical and social innovations are needed to make the transition from a linear to a circular economy a success. This is what the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE is researching in the three divisions “Materials”, “Systems” and “Business”. The cooperation of the six Fraunhofer institutes IAP, ICT, IML, IVV, LBF and UMSICHT enables a multi-stakeholder approach in which the appropriate R&D competencies are bundled.

Fraunhofer CCPE would like to present and discuss successful projects and research approaches on an international scale at the Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich. The summit is to become an international forum for exchanging ideas for solutions and innovations for a circular plastics economy.

Cross-industry collaboration - local, regional and international
Since August 2022, Prof. Manfred Renner, Institute Director of Fraunhofer UMSICHT, is the new head of Fraunhofer CCPE. He succeeds Prof. Eckhard Weidner, who has retired. “Cross-industry cooperation - very local, but also regional and international - is the elementary prerequisite for a functioning circular plastics economy. At the summit, players from all points of the compass will meet and network in order to rethink the plastics value chain together," explains Prof. Manfred Renner, adding, “We want to provide answers to the following questions:  How can we make all Circular Economy principles, i.e. the ten R-strategies, known? How can industry, science and society best cooperate in a transformation to a circular plastics economy for the greatest possible impact?”

Results of the Fraunhofer CCPE cluster so far are innovative approaches for circular business models, intelligent collection, sorting, and recycling technologies, but also new formulations for circular polymers and compounds to enable multiple recycling cycles. With the newly developed assessment tool CRL® , companies can, for example, self-assess the maturity of products or product systems with regard to the circular economy. The tool checks the extent to which a product already takes into account circular economy principles in the areas of product design, product service system, end-of-life management and circular economy, and where there is still potential for improvement.

Source:

Fraunhofer UMSICHT

(c) deepak@deepakdavda.com
06.09.2022

Techtextil India to take place in September 2023

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 

Messe Frankfurt India has announced that the ninth edition of Techtextil India will be held from 12 – 14 September 2023, for the first time at JIO World Convention Centre (JWCC), Mumbai. On the side-lines of the three-day fair, the organisers are planning a series of live sessions to spark debates on important industry topics and high-growth application areas.
 
As the leading business event for the Indian technical textile industry, Techtextil India, aims to connect international and domestic players with buyers from 12+ segments under diverse application areas and create a one-stop sourcing platform to highlight latest product innovations in technical textiles.
 
Marking a spectacular comeback after the lockdown, the eighth edition of Techtextil India in  2021 stood out to be a ground-breaking business platform for the technical textile sector with live demonstrations from over 150 companies’ brands and an exclusive German pavilion. The high-profile event, over the course of three days attracted 4,087 trade visitors from 25 states and 194 cities. Mr Pramod Khosla, Director, Khosla Profil Pvt Ltd, shared: “Despite the unprecedented situation created by pandemic, Techtextil India 2021 saw a tremendous response from visitors. This goes to show the immense interest and trust that industries and people have in the technical textiles sector as well as in Techtextil India.”
 
For the upcoming ninth edition, leading Indian players such as Alok Masterbatches, Khosla Profil, Park Nonwoven, Sarex Chemicals, Suntech Geo, Weavetech have already confirmed their participation and will be showcasing innovations in high-growth application areas of Geotech, Packtech, Agrotech & Indutech with a focus on products such as specialty fibres, filtration fabrics, functional textiles & advance technology.
 
While Mobiltech, Indutech, Meditech, Packtech and Sportech constitute a major share value in the global market for technical textiles, the segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) in the Indian market are Oekotech, Protech, Mobiltech, Geotech, Indutech, Agrotech, Buildtech and Packtech. The government’s target to accelerate technical textile sector growth from 8% to 15-20% range in the next five years and transform the nation into a major player in innovations, technology development, applications in key areas (agriculture, roads and railways, water resources, hygiene and healthcare, personal protection) is giving strong impetus to industry players.

With an aim to place India as one of the leaders in the global technical textile market and enhance its adoption and penetration domestically, the Indian government has earmarked INR 1000 crore (USD 130.7 million) dedicated only for R&D of the Technical Textiles sector, while the Union Budget 2022-23 further allocates INR 100 crore (USD 13.07 million) for the National Technical Textiles Mission. The centre is making strong efforts to encourage the use and adoption of technical textiles and has mandated the use of 92 items by government organisations covering agriculture, horticulture, highways, railways, water resources, and medical applications. The organisers are in talks with international technology players targeting these application areas to present their innovations at the three-day fair.

Source:

Messe Frankfurt (HK) Limited

(c) Messe Frankfurt (HK) Ltd.
08.08.2022

Deferral of Cinte Techtextil China 2022

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry. The 2021 edition attracted 366 exhibitors and recorded 14,868 visits. The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

Source:

Messe Frankfurt (HK) Ltd

Photo: FET
02.08.2022

FET at Techtextil 2022: Principle theme was Sustainability

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

(c) Fraunhofer IAP
Faserverstärktes Monomaterialkomposit aus PLA
28.07.2022

Fraunhofer CCPE: Technische Produktinnovationen für eine zirkuläre Kunststoffwirtschaft

Ziel des Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE ist es, die Wertschöpfungskette Kunststoff zirkulär zu gestalten. Sechs Fraunhofer-Institute erforschen am Beispiel Kunststoff, wie der Wandel von einer linearen zur einer zirkulären Kunststoffwirtschaft gelingen kann. Auf der ACHEMA in Frankfurt, der internationalen Messe für die Prozessindustrie, stellt das Fraunhofer CCPE vom 22. bis zum 26. August zwei technische Produktinnovationen und ein Bewertungstool für Unternehmen der Circular Economy vor.

Seit 2018 erforschen die sechs Fraunhofer-Institute — IAP, ICT, IML, LBF, IVV und UMSICHT – wie eine nachhaltige Transformation einer gesamten Wertschöpfungskette unter Prinzipien der Circular Economy erfolgen kann. Durch einen Multi-Stakeholder-Ansatz können FuE-Kompetenzen gebündelt werden, um Produkte zirkulär zu gestalten, passende Geschäftsmodelle zu entwickeln und End-of-Life Verluste bei Kunststoffabfällen zu reduzieren. Auf der ACHEMA werden die folgenden Projekte ausgestellt:

Ziel des Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE ist es, die Wertschöpfungskette Kunststoff zirkulär zu gestalten. Sechs Fraunhofer-Institute erforschen am Beispiel Kunststoff, wie der Wandel von einer linearen zur einer zirkulären Kunststoffwirtschaft gelingen kann. Auf der ACHEMA in Frankfurt, der internationalen Messe für die Prozessindustrie, stellt das Fraunhofer CCPE vom 22. bis zum 26. August zwei technische Produktinnovationen und ein Bewertungstool für Unternehmen der Circular Economy vor.

Seit 2018 erforschen die sechs Fraunhofer-Institute — IAP, ICT, IML, LBF, IVV und UMSICHT – wie eine nachhaltige Transformation einer gesamten Wertschöpfungskette unter Prinzipien der Circular Economy erfolgen kann. Durch einen Multi-Stakeholder-Ansatz können FuE-Kompetenzen gebündelt werden, um Produkte zirkulär zu gestalten, passende Geschäftsmodelle zu entwickeln und End-of-Life Verluste bei Kunststoffabfällen zu reduzieren. Auf der ACHEMA werden die folgenden Projekte ausgestellt:

  • Faserverstärktes Monomaterialkomposit aus PLA
    Biobasierte Kunststoffe werden zunehmend für technisch anspruchsvolle Einsatzbereiche z.B. in der Automobil- und Textilindustrie nachgefragt. Zwei zentrale Anforderungen sind dabei ihre Stabilität und ihre Recyclingfähigkeit. Forschende der Fraunhofer-Institute IAP und ICT entwickelten innovative PLA-basierte Monomaterial-Komposite (Organobleche), die technische Applikationen adressieren und insbesondere mit Hinblick auf die Rezyklisierbarkeit einen Beitrag zur Umsetzung der Sustainable Development Goals der UN leisten können.
  • Optisch und mechanisch verbesserte Folienrezyklate
    Bei der Herstellung von Folien zählt neben den mechanischen Eigenschaften besonders der visuelle Eindruck. Es dürfen keine Fehlstellen in Form von Stippen, Fischaugen oder Abrissen auftreten, die insbesondere bei Verwendung von Rezyklaten zu Problemen führen können. Die direkte Verwendung eines Folienregranulats führt jedoch häufig zu vielen Abrissen während der Folienherstellung, die zudem fatale Auswirkungen auf die mechanischen Materialeigenschaften haben. Durch die Zugabe einer geeigneten Additivformulierung konnte die Folienqualität nun signifikant verbessert werden.

Ist ein Produkt reif für die Circular Economy?
Weiterhin präsentieren die Forschenden nun auf der ACHEMA das webbasierte Tool CRL®, mit dem Unternehmen den Reifegrad von Produkten oder Produktsystemen im Hinblick auf die Circular Economy selbst bewerten können. Es prüft, inwieweit ein Produkt die Strategien der Kreislaufwirtschaft in den Bereichen Produktdesign, Produktdienstleistungssystem, End-of-Life-Management und Kreislaufwirtschaft bereits berücksichtigt und wo noch Verbesserungspotenzial besteht.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

(c) INNATEX
19.07.2022

INNATEX: Countdown to 50th international trade fair for sustainable textiles

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

Alongside standard bodies such as IVN and GOTS, which have taken part in INNATEX for many years, younger projects such as Fairmodel and the digital platform Retraced will be part of this special area. Fairtrade Germany, Femnet and the VDMD are to be found there too. Almost all of them are joining in with the Ask Me Anything dialouge format. Interested attendees can pre-book a slot of up to ten minutes for a personal discussion with the expert of their choice.

The supportive activities that had to be suspended during the pandemic are enjoying a comeback at this year’s summer fair: five newcomers to INNATEX designated DesignDiscoveries will be presenting their projects in another special area. Vegtus, from Barcelona, produces sneakers and other products from cactus leather. Natural textiles such as organic cotton are used by Lounge Cherie, a yoga fashion label.

Products for kids through to seniors, classics and streetwear, footwear and accessories
Nordlicht similarly relies on recyclable, renewable natural fibres for its outerwear, bags and accessories. The field of circular fashion is also served by the remaining two Design Discoveries. Both Nature is Future, with its handmade sneakers, and Freibeutler, with its functional rucksacks, make extensive use of recycled materials, while also paying due attention to broader sustainability aspects.

Regular INNATEX exhibitors include Lana, Chapati and Didymos, all of whom are also celebrating anniversaries. Labels such as Anokho with their colourful accessories in jacquard fabrics and Danish label Angel Circle with its plus-size fashion are exhibiting for the first time.

Source:

INNATEX / UBERMUT GbR

13.07.2022

VUB: Hybrid threads based on ultrafine metallic micro-wires

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

Attention was paid to the advanced solutions for smart textiles and e-textiles products esp. electrically conductive hybrid threads based on ultrafine metallic micro-wires. A significant advantage of these threads lies in their full compatibility with standard textile manufacturing processes, and possibility of customization in terms of fineness, electrical conductivity and temperature resistance of individual thread. As an example of one of the applications of conductive threads, different types of woven elastic conductive ribbons were demonstrated, which could be used as bus bars or as textile conductors wherever a variable length of conductive element is required without the negative influence on their electrical resistance during the change the length.

More information:
VUB micro-wires
Source:

VÚB a.s.
 

Photo: © 2022, Steiger Participations
11.07.2022

Swiss Textile Machinery technology and innovations for technical textiles

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

Feel-good technical fabrics
Some technical textiles feel like a second skin. A well-known example is activewear from the ‘sport tech’ field. Activewear includes breathable clothing, usually consisting of a three-layer-laminate: an inner lining, a breathable membrane in the center, and an outer fabric. The challenge is to bond the individual layers without losing breathability or softness, while meeting technical requirements such as resistance to a number of wash cycles.

Bonding solutions meeting top quality requirements, as well as ambitious standards for environmental protection and sustainability, were reinvented by the Cavitec brand from the Santex Rimar Group. This company’s hotmelt technology uses one-component polymers applied to textiles in a hot, molten state. Bonding based on hotmelts is both water- and solvent-free. Drying and exhaust air cleaning are not necessary, which is an ecological advantage. Energy consumption is also significantly lower. Cavitec hotmelt technology is also developed for laminated medical protection fabrics which are safe, high-quality and sustainable. These fabrics can be washed, sterilized, and used again.   

A second skin with added value is the result of Jakob Müller Group’s cooperation with an institute for an established outdoor fashion brand. They have devised a heating mat applied as an inner jacket. Outdoor gear with a heated inlay offers the wearer a comfortable feeling even in a cold climate. The heating mat is particularly light, breathable, flexible and adjustable to three temperature levels.

Fabrics with these advantages are now possible thanks to multi direct weaving (MDW) technology from the Jakob Müller Group. A lacquer-insulated heating strand is inserted into the base textile as a ‘meander’ using MDW technology. The technology is offered with both label weaving machines and the latest generation of ribbon weaving machines. The textile pocket calculator is another MDW based future-oriented application developed in cooperation with a textile research institute.

Safety and health
Life-saving reliability is a must for vehicle airbags. They have to fulfil high security aspects, and must remain inflated for several seconds when an accident occurs. Airbags made of flat-woven fabric – cut and seamed – can show weakness at seams during the inflation phase. Latest Jacquard technology by Stäubli enables one-piece-woven (OPW) airbags to be produced, creating shape and structure in a single process. The final product is an airbag consisting of a sealed cushion with woven seams. OPW airbag weaving reduces the number of production steps, and increases the security aspects.
Another big advantage of Stäubli’s new weaving technology is the flexibility in formats required in today’s mid- and upper-range cars, where lateral protection (in the seat or in the roof over the door) has become standard and is designed in line with the car shape. Safe airbags are woven on modern high-speed weaving machines. The warp material, the variety of fabric patterns, and the importance of precisely shaped airbags require the use of a robust and reliable Jacquard machine.

A revolution for orthopaedic patients is a knitting machine from Steiger Participations, which uses compressive yarns developed to meet the needs of the specific health market. This machine model was exclusively designed for production with inlaid elastic yarns and offers optimum performance with guaranteed final product quality.

In the orthopaedic field, many Steiger flat knitting machines have already been operating as automatic, custom-made production systems. For example, the dimensions of an injured limb are taken by the doctor and fed into a web-based application. The doctor selects the compression class in the various sections of the item and a data file created by the software automatically applies a preconfigured program. With no human intervention required, the program is generated and produced on the machine, precisely matching the patient’s dimensions. Each product is different, and generally available within 48 hours.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.07.2022

Monforts: New orders for machines at Techtextil 2022

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

Trials
“We are now looking forward to interesting new trials and pilot production runs, as well as the commissioning of new orders for machines resulting from the extremely busy exhibition,” he says. “Obviously, everyone at the moment is looking to make energy savings, and we have developed a range of options for helping companies increase their resource efficiency, both on new lines and as retrofitted systems, but this is not stifling innovation at the new material level.

“There was a lot of interest in what is possible with the Montex®Coat coating system and the range of different techniques it enables, and at our ATC in Mönchengladbach, a Montex®Coat unit is integrated into the full technical textiles pilot line, on which it is possible to run new fabrics in widths of up to 1.8 metres.”

Explosion proof
The technical textiles line at the ATC incorporates a Montex four-chamber stenter and is fitted with an explosion-proof coating application chamber in order to allow treatment to be carried out with organic solvents and other volatile materials.

Every single component within the chamber has to meet the standards of the European Union’s ATEX directives for working in a potentially explosive atmosphere. A range of sensors linked to alarms operate at various levels within the chamber to ensure the specified lower explosion limit (LOL) is never exceeded and the ventilation adapts accordingly.

Advanced functions
Special features on the finishing line relate to further advanced functions such as the ability to treat materials not only at temperatures of up to 320°C, but also to be able to treat the top and bottom faces of certain materials at different temperatures within a single pass through the machine.

To achieve this, the first two chambers of the stenter are fitted with special, heavy duty TwinAir ventilation motors and separate burners for individual top/bottom temperature. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment paramenters.

Another key feature of the technical textiles line at the ATC is the special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

01.07.2022

Award for best master's thesis of the German Textile Mechanical Engineering 2022 goes to young engineer of ITA Aachen

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The 2002 prize of the Walter Reiners Foundation of the VDMA Textile Machinery Association for the best Master's thesis in German textile mechanical engineering was awarded to a young engineer from the ITA Institut für Textiltechnik of RWTH Aachen University. The prize ceremony took place at Techtextil 2022 in Frankfurt am Main, Germany. Peter D. Dornier, Chairman of the Board of the Walter Reiners Foundation, presented the award at the VDMA Textile Machinery Association’s booth.

Felix Xaver Zerbes, M.Sc., was awarded the "Promotional Prize for the Best Master's Thesis of the German Textile Machinery Industry 2022", endowed with 3,500 EUR, for his master's thesis "Development and Construction of a Separation Unit for Weft Yarns in Air Jet Weaving".

The subject of the master's thesis was the development of a mechanism with which faulty sections in the weft yarn can be sorted out before they are woven into the textile. This way, both yarn-related weft defects and material defects can be drastically reduced. The prototype developed by Mr Zerbes shows how this can be done even during the ongoing weaving process without having to stop production. Due to its modular design, the yarn rejection unit can be retrofitted to many different types of air-jet weaving machines, which represents an enormous savings potential not only in Germany but in weaving mills all over the world.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

(c) VDMA
Award winners with foundation chairman and professors
23.06.2022

VDMA: Junior engineers with focus on sustainability

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

Felix Zerbes, RWTH Aachen, was awarded a Promotion Prize of 3.500 euros in the category Master. He developed a technical solution for air jet weaving to improve the quality of woven fabric.

Source:

VDMA e. V.

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

21.06.2022

RUDOLF celebrates its 100th birthday at TECHTEXTIL

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

  • New product initiatives and a system solution.

In the year of its 100th birthday RUDOLF will be at TECHTEXTIL to present its latest innovations and process solutions. Since 1922, RUDOLF offers a wide portfolio of specialty chemicals aiming to increase innovation and sustainability along the entire value chain, from fiber to finish.


At TECHTEXTIL, RUDOLF will present four new product initiatives and one system solution. The Company will hold “Conscious Performance” short seminars at its booth to present them.

New product initiatives
BIO-LOGIC® - Performance products with bio-carbon at core. Textile functionality is ensured through natural, renewable raw materials that are neither chemically nor genetically modified and that are not competing as food, feed or fuel.

CYCLE-LOGIC® - A new path: the upcycling of post-consumer, disposable and non-returnable plastics into valuable textile chemistry. Recycled PET bottles are now raw material for the manufacturing of some of our textile auxiliaries without attacking new, virgin resources.

PRISTINE® - Hygiene and freshness from continuous R&D advances. RUDOLF’s new ingredient brand that groups all high-performing technologies for textile hygiene, protection and freshness.

BIONIC FINISH® ECO - An idea borrowed from Mother Nature. Based on proprietary dendrimer technology, RUDOLF presents an extended family of unique fluorine-free DWR formulations suited for different materials and designed for different applications and needs.

New system solution
ECO-LOGIC® - Two-steps process designed and managed by RUDOLF’s specialists in textile process chemistry. It simulates, analyses and measures the environmental impact of a given industrial textile process to then provide insights into the optimization of resources, costs and CO2 emissions..

Source:

RUDOLF GmbH

Graphic: RadiciGroup
20.06.2022

RadiciGroup at Techtextil with innovative textile solutions

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

  • Target markets: automotive, furnishings, sports and technical apparel
  • New product entry: radipeople® line of personal protective equipment

RadiciGroup is at Techtextil 2022, the leading European trade fair for technical textiles, taking place in Frankfurt am Main, Germany, from 21 to 24 June. On display in the RadiciGroup exhibition area are the Group’s latest products for the automotive, furnishings and apparel markets: from nylon and polyester yarn, including biosource and recycled lines, to nonwovens and the new radipeople® line of personal protective equipment (PPE).

Indeed, at Techtextil, RadiciGroup is showcasing RENYCLE®, a yarn obtained from recycled nylon; REPETABLE®, a polyester yarn from post-consumer recycled plastic bottles; RESPUNSIBLE®, a nonwoven fabric from recycled polypropylene; and BIOFEEL®, a brand identifying a yarn line obtained from renewable sources of both nylon and polyester.

Moreover, RadiciGroup is participating in a forum organized by the Technical Textiles Section of Sistema Moda Italia in collaboration with the Italian Space Agency (ICE) (Hall 12.1 – Stand C58), with the goal of introducing product innovations not only coming from a single manufacturer, but also from an innovative synergistic approach all along the supply chain, from raw materials to finished products. An example of this synergistic collaboration is the “Mars Spacesuit”, recently tested in the USA by analogue astronauts as part of a space medicine project designed to measure the vital signs of future astronauts and develop technologies to support the simulation of life in space and planetary environments. RadiciGroup teamed up with major Italian textile companies and supplied the materials to make the suits for the six analogue astronauts participating in the mission and coordinated the development of the technologies needed to create the technicalwear for use in extreme environmental conditions.

 

Source:

RadiciGroup

20.06.2022

Beaulieu Fibres International at Techtextil 22

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

Beaulieu Fibres International will offer ISCC Plus (International Sustainability and Carbon Certification Plus) certified bio circular MONO-PP and BICO PP/PE fibres in 1,3-8,9 dtex, available with all the main available finish classes. These drop-in solutions, with no loss in quality, will support customers reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications, contributing to the transition towards a circular economy.

Source:

Beaulieu Fibres International

14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

(c) SHIMA SEIKI MFG., LTD.
14.06.2022

SHIMA SEIKI to exhibit at Techtextil 2022 in Frankfurt

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, along with its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will be participating in the Techtextil exhibition in Frankfurt, Germany from the 21st till the 24th of June 2022.

On display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible by taking advantage of the fact that flat knitting as a textile production method is capable of producing end products that are shaped-to-form and with added thickness. Compared to current methods of preform production, savings in post-processing time, material, labor and associated costs are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

SHIMA SEIKI's SDS®-ONE APEX4 3D design system will be available for demonstrations as well. Of particular interest should be its ultra-realistic simulation capability that realizes Virtual Sampling. When countless variations must be evaluated before arriving at a final design, virtual product samples can be used to streamline the decision-making process by minimizing the enormous amount of time, cost and material normally associated with producing actual samples for each variation. When approved, the same data can be converted to machine data for immediate knitting, significantly reducing lead times.