From the Sector

Reset
20 results
Trützschler Group auf der Techtextil (c) Trützschler Group SE
13.03.2024

Trützschler Group auf der Techtextil

Vom 23. bis 26. April 2024 zeigt die Trützschler Group auf der Techtextil in Frankfurt am Main die neuesten Entwicklungen für die Herstellung von Vliesstoffen auf Faserbasis. Im Fokus stehen die T-SUPREMA Vernadelungsanlagen und nachhaltige Lösungen für Vliesstoffe aus Zellulosefasern. Auf der Techtextil 2022 wurde die Kooperation zwischen Trützschler Nonwovens und dem italienischen Unternehmen Texnology offiziell bekannt gegeben. Mit der Einweihung der T-SUPREMA Vernadelungsanlage im Technikum in Egelsbach geht Trützschler in diesem Jahr den nächsten Schritt. Im Bereich Textilrecycling stellt Trützschler Spinning mit dem Kooperationspartner Balkan sein aktuelles Portfolio vor.

Vliesstofflösungen
Auf dem Gemeinschaftsstand von Trützschler Nonwovens und dem italienischen Unternehmen Texnology S.l.r. können sich die Besucher über T-SUPREMA informieren. Das Konzept zielt auf hohe Produktqualität und Systemeffizienz im Bereich oder mechanisch vernadelte Vliesstoffe - als Basis für Anwendungen wie Geotextilien, Automobiltextilien, Filtermedien und verschiedene industrielle Anwendungen.

Vom 23. bis 26. April 2024 zeigt die Trützschler Group auf der Techtextil in Frankfurt am Main die neuesten Entwicklungen für die Herstellung von Vliesstoffen auf Faserbasis. Im Fokus stehen die T-SUPREMA Vernadelungsanlagen und nachhaltige Lösungen für Vliesstoffe aus Zellulosefasern. Auf der Techtextil 2022 wurde die Kooperation zwischen Trützschler Nonwovens und dem italienischen Unternehmen Texnology offiziell bekannt gegeben. Mit der Einweihung der T-SUPREMA Vernadelungsanlage im Technikum in Egelsbach geht Trützschler in diesem Jahr den nächsten Schritt. Im Bereich Textilrecycling stellt Trützschler Spinning mit dem Kooperationspartner Balkan sein aktuelles Portfolio vor.

Vliesstofflösungen
Auf dem Gemeinschaftsstand von Trützschler Nonwovens und dem italienischen Unternehmen Texnology S.l.r. können sich die Besucher über T-SUPREMA informieren. Das Konzept zielt auf hohe Produktqualität und Systemeffizienz im Bereich oder mechanisch vernadelte Vliesstoffe - als Basis für Anwendungen wie Geotextilien, Automobiltextilien, Filtermedien und verschiedene industrielle Anwendungen.

Darüber hinaus erhalten die Besucher Einblicke in die digitale Arbeitsumgebung von T-ONE und deren Rolle bei der Sicherstellung einer nachhaltig hohen Vliesstoffqualität und Prozesseffizienz. T-ONE ist ein Bestandteil des T-SUPREMA Anlagenkonzepts, kann aber an jede faser- oder polymerbasierte Vliesstoffanlage angepasst werden.

Auch wird sich Trützschler Nonwovens auf seine Nassvlies-/ Spunlace- (WLS) und Krempel-/ Pulpanlagen (CP) für biologisch abbaubare Vliesstoffe auf Cellulosebasis konzentrieren. In Zusammenarbeit mit Voith treibt Trützschler Nonwovens die Entwicklung innovativer und umweltfreundlicher WLS- und CP-Produkte voran.

Spinnereivorbereitung
Zusammen mit dem türkischen Unternehmen Balkan präsentiert Trützschler Komplettlösungen für das mechanische Recycling und die Spinnereivorbereitung von Textilabfällen. Balkan ergänzt mit seinen Schneid- und Reißanlagen das Produktportfolio von Trützschler.

Die Besucher werden sowohl über die Balkan Reißanlagen als auch über die Putzereianlagen von Trützschler, die neue Integrierte Strecke IDF 3 und die intelligente Karde TC 30Ri für das Recycling, informiert. Das neue Flaggschiff der Karden verwandelt Sekundärfasern aus gerissenen Textilabfälle in hochwertige Faserbänder für neue Garne.

Source:

Trützschler Group SE

Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic © Fraunhofer ITWM
Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic
05.06.2023

Fraunhofer ITWM, Siriotek und bematic bündeln Vliesstoff-Expertise

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Seit fast 50 Jahren ist die italienische Firma bematic in der Vliesstoffproduktion tätig. Die Entwicklung von fortschrittlicher Air-Lay-Produktionsprozesse steht bei dem Unternehmen im Fokus sowie die Konstruktion, Herstellung und Prüfung von Hochleistungskardieranlagen für Vliesstoffe. Die Ingenieure des Schweizer Unternehmens Siriotek konzentrieren sich auf Simulationen und Tests, die die praktische Problemlösung unterstützen. Das Fraunhofer ITWM bringt sowohl Wissen als auch Erfahrung in der Textiltechnik und der Prozessoptimierung ein und steuert Know-how in der mathematischen Modellierung sowie Charakterisierung von Air-Lay-Prozessen für Stapelfasern bei.

Die drei Partner wollen gemeinsam die nächste Generation von Krempelmaschinen entwickeln, die Leistung und Qualität bei der Air-Lay-Verarbeitung mit Stapelfasern gewährleisten und gleichzeitig Energieverbrauch, Abfallerzeugung und Kohlenstoffemissionen reduzieren. Die Zusammenarbeit bündelt das Fachwissen und die Innovationskraft der Dreien in ihren jeweiligen Bereichen.
 
Schneller, dichter, effizienter
Air-Lay-Technologien sorgen für die thermische, mechanische und chemische Vliesverfestigung. Hierbei wird das Rohmaterial geöffnet und mit einer Walze in einen Luftstrom eingebracht. Dieses Luft-Faser-Gemisch landet auf einem Band und wird dort durch Absaugung verdichtet. »Durch einen gemeinschaftlichen Ansatz erweitern wir die Grenzen der Air-Lay-Technologie, um höhere Produktionsgeschwindigkeiten, eine bessere Gleichmäßigkeit des Vlieses und eine bessere Faserausnutzung zu erreichen sowie letztendlich Lösungen zu liefern, die vollständig auf die individuellen Produktionsanforderungen zugeschnitten sind«, erklärt Giovanni Di Lorenzo, Gründer und Chefingenieur von Siriotek.
 
Zusätzlich minimiert das Projekt so den ökologischen Fußabdruck, ohne dabei die Leistung zu beeinträchtigen. »Wir treiben den Fortschritt voran, verbessern die Produktionsqualität und tragen zu einem nachhaltigeren sowie effizienteren Ökosystem in der Textilindustrie bei«, ergänzt Dietmar Hietel, Leiter der Abteilung »Transportprozesse« am Fraunhofer ITWM. Auch Giovanni Bettarini, Partner und kaufmännischer Leiter bei bematic, ist vom Projekt überzeugt: »Durch diese Zusammenarbeit werden wir in der Lage sein, unseren Kunden Fertigungslösungen für verschiedene Anwendungen in den Bereichen Automobil, Bau, Filtration und Geotextilien anzubieten.«

Source:

Fraunhofer ITWM

(c) Groz-Beckert
Carding SiroLock Plus InLine
14.04.2023

Groz-Beckert at INDEX™23

Groz-Beckert will be presenting the latest innovations from its product area Carding to visitors at INDEX™23

The InLine card clothing series for the nonwovens industry will take center stage at the Groz-Beckert exhibition booth. A new and patented manufacturing process made the development of the innovative metallic card clothing series possible. It offers customers improved process reliability and increased uptime of the card. At the same time, the new process enables environmentally friendly and resource-saving production.

In addition to a controlled and precise hardening of the teeth, the wires are characterized by a reduced rib height and a completely scale-free surface. An exhibit at the booth will demonstrate what distinguishes the new process from the conventional production method and will highlight the differences between the new Groz-Beckert InLine card clothing series and its predecessor generation.

Groz-Beckert will be presenting the latest innovations from its product area Carding to visitors at INDEX™23

The InLine card clothing series for the nonwovens industry will take center stage at the Groz-Beckert exhibition booth. A new and patented manufacturing process made the development of the innovative metallic card clothing series possible. It offers customers improved process reliability and increased uptime of the card. At the same time, the new process enables environmentally friendly and resource-saving production.

In addition to a controlled and precise hardening of the teeth, the wires are characterized by a reduced rib height and a completely scale-free surface. An exhibit at the booth will demonstrate what distinguishes the new process from the conventional production method and will highlight the differences between the new Groz-Beckert InLine card clothing series and its predecessor generation.

The first special geometry of the Groz-Beckert InLine card clothing series to be developed was the SiroLock™ plus worker and doffer wire. It impresses with a more effective fiber take-up, control and transfer. Augmented reality will allow visitors to experience the functionality and operating principle behind SiroLock™ plus at INDEX™23.

Source:

Groz-Beckert

Foto: Freudenberg Performance Materials
11.08.2022

Freudenberg Friction Inserts at WindEnergy Hamburg 2022

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

Freudenberg Performance Materials is introducing Freudenberg Friction Inserts to trade visitors at WindEnergy, the leading trade fair for the international wind energy industry. Freudenberg Friction Inserts is a unique technology aimed at increasing the power density of wind turbines.

The Freudenberg Friction Inserts (FFI) technology is based on a special very thin nonwoven carrier material coated on one side with hard particles. The FFI are customized to fit each application, in terms of both the geometry and the construction parameters of the connection. As they do not create a gap they can be applied exactly where they are needed.

When placed in the joint, these hard particles penetrate into the surfaces of the two joining parts creating a micro interlock, thus reliably increasing the friction coefficient and achieving higher torque transmission in connections. This results in higher performance and a significant improvement in the efficiency of wind turbines. In addition, it enables the downsizing of components without compromising performance, reducing weight and material.

FFI help to improve the reliability of connections and thus of the entire wind turbine. Furthermore, they eliminate slipping and prevent fretting of connections.

Other examples of applications for FFI are highly loaded flange connections between the rotor shaft and gearbox, connections between the main bearing and the machine carrier housing, the gearbox to generator, or at the pitch gear or ring gear. They increase the friction co-efficient between two components.

Source:

Freudenberg Performance Materials

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Photo: ANDRITZ
25.02.2022

ANDRITZ at IDEA 2022

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

More information:
Andritz IDEA nonwovens spunlace
Source:

ANDRITZ AG

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

Trützschler Nonwovens auf der IDEA (c) Trützschler Nonwovens & Man-Made Fibers GmbH
A Carded/Pulp (CP) line for biodegradable composite nonwovens from pulp and viscose fibers
21.02.2022

Trützschler Nonwovens at IDEA

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

Digital solutions optimize the production floor
In order to ensure lasting quality, Trützschler Nonwovens presents a modular, digital work environment that systematizes, digitizes and simplifies typical work processes. With the help of Industry 4.0 technologies, line, process and quality data relevant to a production lot can be stored, aggregated, visualized and analyzed with regard to process improvements.

Trützschler USA
With its headquarters in Charlotte, North Carolina, and more than 100 employees, Trützschler USA is the first point of contact for all matters relating to American nonwovens producers. The company is able to equip and convert machines according to customer specifications (certified UL508A panel shop), carry out factory acceptance tests and a wide range of repairs in Charlotte.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

05.11.2021

GKD-Lösungen für die Vliesstoffindustrie auf der INDEX

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Besondere Topografie und kurze Lieferzeiten
Überaus positiv war die Resonanz auf das neue GKD-Prozessbandgewebe CONDUCTIVE 2215 – eine Kreuzköperbindung aus speziellen Polyester-Filamenten für die Airlay- und Meltblown Vliesformierung. Für die sichere Ableitung der in Formierprozessen unvermeidlichen elektrostatischen Aufladung sorgen karbonbeschichtete Filamente. Das innovative Zusammenspiel von Materialwahl, Filamentdurchmesser, Bindungstechnologie und Luftdurchlässigkeit verleiht dem neuen Formiergewebe von GKD eine besondere Topografie. Sie gewährleistet eine präzise, homogene Vliesablage bei zugleich guter Absaugung und minimiertem Risiko von Faserverhakungen oder -verlust. Das qualifiziert diesen neuen Gewebetyp insbesondere für die Verarbeitung kurzfaseriger, gebleichter Baumwolle in der Airlay-Formierung. Aus Anwendersicht sprechen für dieses Produkt überdies die guten Lieferzeiten dank durchgängiger Produktion bei GKD in Deutschland. Dadurch entfallen die sonst üblichen Unwägbarkeiten und langen Lieferzeiten anderer Anbieter mit Lieferketten in Fernost oder Übersee und anschließender Konfektionierung in Europa.

Antihaftbeschichtete Glashybrid-Leichtgewichte
Ein zweiter Magnet am GKD-Messestand waren die antihaftbeschichteten Glashybrid-Gewebebänder für Thermobonding-Prozesse. Die Glashybrid-Gewebebänder von GKD sind bereits seit Jahren zur thermischen Verfestigung von hoch voluminösen oder stark verdichteten Produkten in Doppelbandöfen erfolgreich etabliert. Durch ihre einlagige Gewebekonstruktion aus Edelstahldrähten in Schussrichtung und Kettseilen aus Glasfaserlitzen sind sie energieeffiziente Leichtgewichte und damit besonders wirtschaftlich in der Anwendung. Unterstrichen wird diese Wirtschaftlichkeit durch eine deutlich höhere Fertigungsgeschwindigkeit, mehrjährige Laufzeiten sowie minimierte Reinigungsintervalle. Die vollständige PFA-Beschichtung von Drähten, Litzen und Kreuzungspunkten qualifiziert den Bandtyp insbesondere für stark klebende Produkte oder solche mit großen Schrumpfkräften. Mit der nochmals verstärkten Gewebeauslegung – wahlweise magnetisch oder nichtmagnetisch – wurden die ohnehin schon guten Eigenschaften wie Querstabilität, Spurtreue und Standzeit noch weiter verbessert.

Produkte für Trocknung und Filtration
Im Rahmen der INDEX gefragte Problemlöser waren auch die nahtlosen Spiralbänder aus GKD-Fertigung. In der Vliesproduktion gewährleisten die in Luftdurchlässigkeit, Spurtreue und Formstabilität kunden- und anwendungsspezifisch ausgelegten Bänder in PPS-Ausführung produktschonende Trocknungsprozesse bei bis zu 180 Grad Celsius. Abgerundet wurde das Ausstellungsprogramm von GKD in Genf durch Filtermedien für Zentralfilter, Spinnbalken und Anblassiebe aus Metallgewebe für die Polymerfiltration.

Source:

GKD / impetus.PR

Reifenhäuser Enka Tecnica mit High-End-Komponenten auf der INDEX (c) Reifenhäuser
19.10.2021

Reifenhäuser Enka Tecnica exhibits high-end components at INDEX

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

With its refresh service for refurbishing used components, Enka Tecnica not only offers a cost-efficient alternative to new parts, but also extremely fast delivery times, a factor that is often decisive to maintain daily production targets. Visitors to Geneva will be able to see the quality of refresh components displayed at the booth - a meltblown and a spunbond spinneret, half of which has been refurbished. They will be able to see the condition of the capillary holes before and after the refresh through a microscope.

Another trade show highlight includes jet strips for hydroentangling nonwovens. Depending on the application, they are offered in Smart, Advanced, and Premium versions and have a special unique selling point – the strips are fully hardened, whereas competitor products usually only have a hardened surface. This quality advantage results in significantly longer service lives, which is why they are also known on the market as "The World's Hardest Strips”.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

04.10.2021

Die Vliesstoffindustrie auf der INDEX™ 20

Nur noch einen Monat, bevor die INDEX™20 zum ersten Mal seit 2017 ihre Tore öffnet, und rund 750 Aussteller haben ihre Teilnahme bereits bestätigt. Dies übersteigt die Zahlen von 2017 und zeigt deutlich die Relevanz der INDEX™20 als Anlaufstelle für Informationen aus erster Hand über neue Entwicklungen in den Bereichen Filtration, Transport, Bau, Hygiene, Medizin und Verpackung.  Wie immer wird es eine große Bandbreite an Endanwendungen geben, darunter langlebige Anwendungen und Einweganwendungen.

Trotz der Herausforderungen, mit denen viele Sektoren konfrontiert sind, haben sich die Vliesstoffe weiterentwickelt und sind während der Coronavirus-Pandemie noch stärker in den Vordergrund getreten. In einer solchen Zeit ist eine Veranstaltung wie INDEX™ wichtiger denn je, nicht nur um weiteres Wachstum zu gewährleisten, sondern auch um den Beitrag von Vliesstoffen im Kampf gegen die Pandemie zu unterstreichen und zu feiern. Um sicherzustellen, dass jeder die Veranstaltung unbesorgt genießen kann, werden alle erforderlichen Gesundheitsprotokolle zum Schutz der Aussteller und Besucher vorhanden sein.  

Nur noch einen Monat, bevor die INDEX™20 zum ersten Mal seit 2017 ihre Tore öffnet, und rund 750 Aussteller haben ihre Teilnahme bereits bestätigt. Dies übersteigt die Zahlen von 2017 und zeigt deutlich die Relevanz der INDEX™20 als Anlaufstelle für Informationen aus erster Hand über neue Entwicklungen in den Bereichen Filtration, Transport, Bau, Hygiene, Medizin und Verpackung.  Wie immer wird es eine große Bandbreite an Endanwendungen geben, darunter langlebige Anwendungen und Einweganwendungen.

Trotz der Herausforderungen, mit denen viele Sektoren konfrontiert sind, haben sich die Vliesstoffe weiterentwickelt und sind während der Coronavirus-Pandemie noch stärker in den Vordergrund getreten. In einer solchen Zeit ist eine Veranstaltung wie INDEX™ wichtiger denn je, nicht nur um weiteres Wachstum zu gewährleisten, sondern auch um den Beitrag von Vliesstoffen im Kampf gegen die Pandemie zu unterstreichen und zu feiern. Um sicherzustellen, dass jeder die Veranstaltung unbesorgt genießen kann, werden alle erforderlichen Gesundheitsprotokolle zum Schutz der Aussteller und Besucher vorhanden sein.  

Natürlich ist die Pandemie nicht die einzige Herausforderung, mit der die Welt heute konfrontiert ist, und viele der Möglichkeiten zur Lösung einiger der wichtigsten Probleme wie Luftqualität, Kosteneffizienz, Nachhaltigkeit und Bereitstellung von sauberem Trinkwasser werden ebenfalls angeboten. In der Tat erleben wir weltweit einen Anstieg der Investitionen in erneuerbare, recycelte Materialien und die Entwicklung von Recyclingtechniken für Vliesstoffprodukte in einer Reihe von Anwendungen, während gleichzeitig eine Reduzierung des Materialeinsatzes, der Energie und der Abfallproduktion gewährleistet wird.

Eine Neuheit in diesem Jahr ist das INDEX™ Innovation Lab, das zum ersten Mal geöffnet sein wird. Das Innovation Lab ist ein spezieller Bereich innerhalb der INDEX™20, in dem Innovation und F&E präsentiert werden. Es ermöglicht die Entdeckung der wichtigsten Eigenschaften und Funktionen von Vliesstoffen in verschiedenen Anwendungen und verbessert das Verständnis für ihr Potenzial. Es werden sogar Poster von einigen der klügsten Köpfe der Branche ausgestellt, die aktuelle, noch laufende Forschungsprojekte sowie die Gewinner und Nominierten der INDEX™20 Innovation Awards vorstellen. Das Innovationslabor wird auch einen "Rundgang" durch das tägliche Leben mit Vliesstoffen bieten, der die breite Palette von Anwendungen und die wachsende Zahl von Sektoren, die von Vliesstoffen berührt werden, präsentiert.

Die sechs kostenlosen Branchenseminare finden parallel zu The Lab statt und bieten Expertenwissen zu den Themen Transport, Filtration, Infektionsprävention, intelligente Vliesstoffe und Geokunststoffe. Jedes Seminar findet live in Genf und parallel dazu auf der virtuellen Plattform statt, wo alle Teilnehmer mit den Referenten interagieren und an Diskussionen und Fragerunden teilnehmen können.

Source:

TEMA Technologie Marketing AG

19.08.2021

GKD auf der INDEX mit neuen Gewebetypen und Weiterentwicklungen

Zur INDEX in Genf, vom 19. bis zum 22. Oktober 2021, präsentiert die GKD Gruppe (GKD) ihre Vliesstoffformierung, -trocknung und -verfestigung sowie Polymerfiltration. Im Mittelpunkt des Messeauftritts zur einer der größten globalen Vliesstoffmessenm stehen neue Produkte für Meltblown-, Airlay- und Spunbond-Vliesformierung. Außerdem stellt die technische Weberei dem Fachpublikum die Weiterentwicklung der in anspruchsvollen Thermobonding-Prozessen seit 2016 bewährten Glashybrid-Gewebebänder vor. Auch maßgeschneiderte Filtermedien aus Metallgewebe für Zentralfilter, Spinnbalken und Anblassiebe für die Polymerfiltration werden auf der Messe präsentiert.

Airlay- und Meltblown
Mit dem neuen Prozessbandgewebe CONDUCTIVE 2215 ergänzt GKD das Spektrum an Bändern für die Vliesformierung. Diesen Gewebetyp kennzeichnet eine Kreuzköperbindung aus speziellen Polyester-Filamenten. Durch ein Zusammenspiel von Materialwahl, Filamentdurchmesser, Bindungstechnologie und Luftdurchlässigkeit entsteht eine optimale Gewebeoberflächentopografie für die Vliesablage.

Zur INDEX in Genf, vom 19. bis zum 22. Oktober 2021, präsentiert die GKD Gruppe (GKD) ihre Vliesstoffformierung, -trocknung und -verfestigung sowie Polymerfiltration. Im Mittelpunkt des Messeauftritts zur einer der größten globalen Vliesstoffmessenm stehen neue Produkte für Meltblown-, Airlay- und Spunbond-Vliesformierung. Außerdem stellt die technische Weberei dem Fachpublikum die Weiterentwicklung der in anspruchsvollen Thermobonding-Prozessen seit 2016 bewährten Glashybrid-Gewebebänder vor. Auch maßgeschneiderte Filtermedien aus Metallgewebe für Zentralfilter, Spinnbalken und Anblassiebe für die Polymerfiltration werden auf der Messe präsentiert.

Airlay- und Meltblown
Mit dem neuen Prozessbandgewebe CONDUCTIVE 2215 ergänzt GKD das Spektrum an Bändern für die Vliesformierung. Diesen Gewebetyp kennzeichnet eine Kreuzköperbindung aus speziellen Polyester-Filamenten. Durch ein Zusammenspiel von Materialwahl, Filamentdurchmesser, Bindungstechnologie und Luftdurchlässigkeit entsteht eine optimale Gewebeoberflächentopografie für die Vliesablage.

Spunbond-Vliesformierung
Mit CONDUCTO® 7690 präsentiert GKD auf der INDEX eine Gewebekonstruktion aus Polyester-Monofilen und metallischen Multifilen. Die webtechnisch auf der Bandrückseite eingebrachten Metallfasern haben keinen Kontakt zum Produkt. Das qualifiziert diesen Gewebetyp auch für die risikofreie Produktion anspruchsvoller Medizin- oder Hygieneprodukte. Gleichzeitig gewährleistet das ebenso robuste wie flexible Garn aus Edelstahlfasern eine bis zu zehn Mal höhere Ableitung elektrostatischer Aufladung als herkömmliche Bänder.

Converting: Spiralbänder
Mit Spiralbändern aus eigener Fertigung bietet GKD eine Lösung für Anwendungen, die beispielsweise  für breite oder schnelllaufende Anlagen der Hygienevliesindustrie geeignet sind.

Thermobonding: Antihaftbeschichtetes Glashybrid-Gewebe
In Doppelbandöfen sind die Glashybrid-Gewebebänder bei der thermischen Verfestigung von hoch voluminösen oder stark verdichteten Produkten geeignet. Querstabilität und vollständige PFA-Beschichtung qualifizieren sie für stark klebende Produkte ebenso wie für Anlagen mit großer Arbeitsbreite oder Produkte mit starken Schrumpfkräften. Als einlagige Gewebekonstruktion mit Edelstahldrähten in Schussrichtung und Kettseilen aus Glasfaserlitzen sind sie außerdem energieeffiziente Leichtgewichte - wahlweise magnetisch oder nichtmagnetisch ausgelegt.

Polymerfiltration: Lange Standzeiten durch Metallgewebekonstruktionen
Die prozessabhängige Gewebeauslegung gewährleistet hohe Schmutzaufnahmekapazität, feine Abscheideraten und geringe Verblockungsneigung. Langfilter oder Ronden aus anwendungsindividuell abgestimmten Gewebelagen optimieren im Spinnbalken die Filtration des Schmelzflusses.

Source:

GKD / impetus.PR

 Antihaftbeschichtete Glashybrid-Gewebebänder von GKD für den Einsatz in Ein- und Doppelbandtrocknern verbinden durch in Laufrichtung verwebte Glaslitzen geringes Gewicht mit Querstabilität. © GKD
Antihaftbeschichtete Glashybrid-Gewebebänder von GKD für den Einsatz in Ein- und Doppelbandtrocknern verbinden durch in Laufrichtung verwebte Glaslitzen geringes Gewicht mit Querstabilität.
11.06.2019

GKD-Prozessbandhit zur Techtextil: Glashybrid-Band für die Vliesverarbeitung

Eine hohe Zahl an Fachbesuchern nutzte die Gelegenheit, im Rahmen der Techtextil mit den Prozessbandexperten der GKD – Gebr. Kufferath AG (GKD) aktuelle Problemstellungen zu diskutieren. Ihr besonderes Interesse galt den antihaftbeschichteten Glashybrid-Bändern für den Einsatz in Ein- und Doppelbandtrocknern. Aber auch die Metallgewebelösungen für Filtrationsprozesse und Architektur, die der weltweit führende Hersteller für anwendungsspezifisch entwickelte Hochleistungsgewebe in Frankfurt präsentierte, zogen zahlreiche Besucher an den Stand.

Eine hohe Zahl an Fachbesuchern nutzte die Gelegenheit, im Rahmen der Techtextil mit den Prozessbandexperten der GKD – Gebr. Kufferath AG (GKD) aktuelle Problemstellungen zu diskutieren. Ihr besonderes Interesse galt den antihaftbeschichteten Glashybrid-Bändern für den Einsatz in Ein- und Doppelbandtrocknern. Aber auch die Metallgewebelösungen für Filtrationsprozesse und Architektur, die der weltweit führende Hersteller für anwendungsspezifisch entwickelte Hochleistungsgewebe in Frankfurt präsentierte, zogen zahlreiche Besucher an den Stand.

Großformatige, verschiebbare Panels – in Werkstoff, Bindung und Farbigkeit höchst unterschiedliche Gewebetypen für Industrie und Architektur – waren auf dem GKD-Messestand zur Techtextil Eyecatcher zum Anfassen. Für Prozessbandkunden, die diese Bänder seit vielen Jahren erfolgreich einsetzen, diente ein für GKD typisches blaues Band als weithin sichtbares Erkennungszeichen. Die ebenfalls anfassbaren Nahtmuster motivierten vor allem auch neue Interessenten, das Gespräch mit den GKD-Ingenieuren zu suchen. Im Mittelpunkt der Gespräche über innovative Prozessbandlösungen standen die Bereiche Thermobonding, Forming und Hygiene. Messehit bei den Prozessbändern waren die von GKD zur internationalen Leitmesse für technische Textilien und Vliesstoffe präsentierten antihaftbeschichteten Glashybrid-Gewebebänder.

Nichts klebt mehr

Mit diesem Bandtyp beantwortet GKD ein drängendes Problem in der Vliesverfestigung und -trocknung: Er verbindet durch in Laufrichtung verwebte Glaslitzen geringes Gewicht mit Querstabilität. Sein besonderes Plus ist jedoch die hochwertige Antihaftbeschichtung, die auch bei stark haftenden Produkten die Verschmutzung durch Produktrückstände minimiert. Dadurch kann diese am Markt bislang einzigartige Bandausführung den Gesamtprozess deutlich verbessern. Zudem wirken sich die seltener erforderlichen Reinigungszyklen und in der Folge höheren Standzeiten auch auf die Produktivität positiv aus. Im Vergleich zu herkömmlichen Glasdreherbändern mit PTFE-Beschichtung gewährleisten die Glashybrid-Gewebebänder von GKD durch ihren zuverlässigen Antihaftschutz und die hohe Querstabilität deshalb eine signifikant bessere Prozessperformance. Entsprechend groß war das Interesse an diesem neuartigen Bandtyp für Thermobondingprozesse.
Neben vielen Bestandskunden, die die Messe zur Kontaktpflege und Information nutzten, zog der GKD-Stand auch viele neue Interessenten an. Die Vielzahl der Kontakte und Fachgespräche auf hohem Niveau prägt das Fazit von Michael Seelert, Geschäftsbereichsleiter Prozessbänder: „Unser Messeauftritt zur Techtextil war sehr erfolgreich, von der Qualität der Kontakte her sogar bisher der beste überhaupt.

Source:

impetus.PR
Agentur für Corporate Communications GmbH

GKD impetus.PR Agentur fuer Corporate Communications GmbH
GKD
25.04.2017

GKD: Erfolgreicher Messeauftritt

Eindrucksvoll spiegelte die INDEX als Leitmesse der Nonwovensindustrie die Dynamik des immer anspruchsvolleren Vliesstoffmarktes wider: Mehr Besucher und Aussteller als je zuvor suchten auf diesem internationalen Fachforum in Genf vier Tage lang den intensiven Austausch. Großes Interesse der Fachbesucher galt den neuentwickelten gewebten Bändern für die Vliesformierung, - verfestigung und -trocknung der GKD – GEBR. KUFFERATH AG. Im Mittelpunkt des Messeauftritts der Gewebespezialisten standen das Formierband CONDUCTIVE® 7690 sowie beschichtete Glashybrid- Gewebe für den Einsatz in Ein- und Doppelbandtrocknern. Da sich diese Produkte bereits bei namhaften Referenzkunden in der Praxis bewähren, nutzten zahlreiche Besucher auf der Messe die Gelegenheit für vertiefende Gespräche. Die Bandbreite der ganzheitlichen Vliesstoffkompetenz von GKD verdeutlichten außerdem Filtermedien aus Metallgewebe für die Polymerfiltration sowie das neue Produktsegment Spiralgliederbänder aus eigener Fertigung. Mit einem neuen Standdesign, das die verschiedenen Anwendungsbereiche optisch gliederte, unterstrich der Weltmarktführer für Technische Gewebe seine Anziehungskraft.

Eindrucksvoll spiegelte die INDEX als Leitmesse der Nonwovensindustrie die Dynamik des immer anspruchsvolleren Vliesstoffmarktes wider: Mehr Besucher und Aussteller als je zuvor suchten auf diesem internationalen Fachforum in Genf vier Tage lang den intensiven Austausch. Großes Interesse der Fachbesucher galt den neuentwickelten gewebten Bändern für die Vliesformierung, - verfestigung und -trocknung der GKD – GEBR. KUFFERATH AG. Im Mittelpunkt des Messeauftritts der Gewebespezialisten standen das Formierband CONDUCTIVE® 7690 sowie beschichtete Glashybrid- Gewebe für den Einsatz in Ein- und Doppelbandtrocknern. Da sich diese Produkte bereits bei namhaften Referenzkunden in der Praxis bewähren, nutzten zahlreiche Besucher auf der Messe die Gelegenheit für vertiefende Gespräche. Die Bandbreite der ganzheitlichen Vliesstoffkompetenz von GKD verdeutlichten außerdem Filtermedien aus Metallgewebe für die Polymerfiltration sowie das neue Produktsegment Spiralgliederbänder aus eigener Fertigung. Mit einem neuen Standdesign, das die verschiedenen Anwendungsbereiche optisch gliederte, unterstrich der Weltmarktführer für Technische Gewebe seine Anziehungskraft.

More information:
GKD INDEX Vliesstoffe
Source:

impetus.PR Agentur fuer Corporate Communications GmbH