From the Sector

Reset
4 results
23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

(c) AZL Aachen GmbH
29.03.2019

AZL, Winner of the JEC Innovation Award 2019, Category: “Industry & Equipment”

This year, AZL won the JEC AWARD 2019 for the development of the new machine system “Ultra-Fast Consolidator Machine”. This innovative machine system is a result of an 18-months AZL Joint Partner Project, conducted in 2017-2018 by the research partners AZL Aachen and Fraunhofer IPT Aachen, in cooperation with industrial partner companies including Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT and Toyota (in alphabetical order).

This year, AZL won the JEC AWARD 2019 for the development of the new machine system “Ultra-Fast Consolidator Machine”. This innovative machine system is a result of an 18-months AZL Joint Partner Project, conducted in 2017-2018 by the research partners AZL Aachen and Fraunhofer IPT Aachen, in cooperation with industrial partner companies including Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT and Toyota (in alphabetical order).

The new UItra-Fast Consolidator Machine offers both high flexibility and mass production of tailored thermoplastic laminates with reduced scrap. Fully consolidated multi-layer laminates with different fiber directions and minimized scrap (tailored blanks) can be produced in cycle times below 5 seconds with this new scalable machine setup. This individualized mass production is accomplished by a combination of laser-assisted tape placement with in-situ consolidation and a piece-flow principle, which is state of the art in the printing industry but has not been used in such a way within composite production. The achievable productivity is enhanced to more than 500 kg/hour by this piece-flow principle with carriers moved through multiple application stations which are equipped with multiple tape placement applicators. The new machine is scalable: multiple application stations can be added, e.g. for each layer one station for mass production or for each fiber direction one station with a carrier-conveyor carousel: here the carriers are moved multiple times through the application stations.

The system will be commercialized by some of the industrial partners in 2019. The real machine setup has been presented at the AZL booth during the JEC Exhibition in Paris 2019.

The follow-up project has just started and is still open to join for industrial partners. This follow-up project comprises a further upscale of the machine system as well as a preparation of the commercialization by long-term durability tests and further process optimizations using different tape materials.

More information:
AZL SMC, AZL, RWTH Aachen
Source:

AZL Aachen GmbH

JEC AWARD Gewinner AZL zusammen mit einigen Projektpartnern bei der Preisverleihung auf der JEC in Paris (c) AZL Aachen GmbH
29.03.2019

AZL gewinnt JEC Innovation Award 2019, Kategorie: „Industry & Equipment“

Das AZL ist Gewinner des JEC AWARD 2019 in der Kategorie „Industry & Equipment“ für die neue Maschinen-Entwicklung "Ultra-Fast Consolidator Machine“. Dieses innovative Maschinensystem ist das Ergebnis eines 18-monatigen AZL Joint Partner Projektes, das 2017-2018 von den Forschungspartnern AZL Aachen und Fraunhofer IPT Aachen in Zusammenarbeit mit industriellen Partnerunternehmen wie Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT und Toyota (in alphabetischer Reihenfolge) durchgeführt wurde.

Das AZL ist Gewinner des JEC AWARD 2019 in der Kategorie „Industry & Equipment“ für die neue Maschinen-Entwicklung "Ultra-Fast Consolidator Machine“. Dieses innovative Maschinensystem ist das Ergebnis eines 18-monatigen AZL Joint Partner Projektes, das 2017-2018 von den Forschungspartnern AZL Aachen und Fraunhofer IPT Aachen in Zusammenarbeit mit industriellen Partnerunternehmen wie Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT und Toyota (in alphabetischer Reihenfolge) durchgeführt wurde.

Die neue UItra-Fast Consolidator Maschine ermöglicht sowohl hohe Flexibilität als auch die Massenproduktion von maßgeschneiderten thermoplastischen Laminaten mit reduziertem Ausschuss. Vollständig konsolidierte Mehrschichtlaminate mit unterschiedlichen Faserrichtungen und minimiertem Ausschuss (Tailored Blanks) können in Zykluszeiten unter 5 Sekunden hergestellt werden mit diesem einfach hoch skalierbaren Maschinenkonzept. Diese individualisierte Massenproduktion wird durch eine Kombination aus laserunterstütztem Tape Placement mit In-situ-Konsolidierung und einem Piece-Flow Prinzip erreicht, das in der Druckindustrie Stand der Technik ist, aber innerhalb der Composite Produktion noch nicht eingesetzt wurde.

Die erreichbare Produktivität ist durch dieses Prinzip auf über 500 kg/Stunde skalierbar, indem einzelne „Carrier“ durch mehrere Applikationsstationen bewegt werden, die wiederum mit mehreren Tapelege-Applikatoren ausgestattet sind. Die neue Maschine ist skalierbar: Mehrere Applikationsstationen können hinzugefügt werden, z.B. für jede Laminat-Schicht eine Station für die Massenproduktion oder für jede Faserrichtung eine Station mit einem Förder-Karussell: Hier werden die Carrier mehrfach durch die Applikationsstationen bewegt.

Die Kommerzialisierung des Systems durch einige der Industriepartner wird 2019 erfolgen. Der reale Maschinenaufbau wurde auf dem AZL-Stand der JEC Messe in Paris präsentiert.

Das „Follow-up“-Projekt hat begonnen und ist noch offen für die Aufnahme weiterer Industrie-Projektpartner. Im Rahmen dieses Follow-up Projektes werden insbesondere die Kommerzialisierung des Systems vorbereitet durch Langzeit-Tests sowie durch weitere Prozessoptimierungen mit unterschiedlichen Tape-Materialien.

More information:
AZL SMC, AZL, RWTH Aachen
Source:

AZL Aachen GmbH

(c) AZL Aachen GmbH
04.03.2019

AZL demonstrates new Ultra-Fast Consolidator Machine at JEC World in Paris

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

This year, AZL is very proud to present a new machine system development at their booth:
The real machine setup of the “Ultra-Fast Consolidator Machine” will be shown at the AZL booth (Hall 5A, D17) which is one of three finalists for the JEC AWARD 2019 in the category “Industry and Equipment”.

More information:
SMC, AZL, RWTH Aachen AZL
Source:

AZL Aachen GmbH