From the Sector

Reset
53 results
05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) Mimaki
05.05.2022

Mimaki with latest technology for sign and textile industries at FESPA 2022

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

Mimaki Europe will be showcasing its latest innovative technologies and connecting with customers at FESPA 2022 Global Printing Expo (May 31st – June 3rd Berlin). Following the success of FESPA 2021, Mimaki will return as a gold sponsor for this landmark industry event. With a host of new solutions released this year, FESPA 2022 will be the first opportunity for Mimaki to demonstrate these printers and cutters at an international event and further explain the many benefits they offer sign and textile printing companies.

In the Spotlight
Standout technology on show includes the new 330 series, consisting of the JV330-160, the CJV330-160 and the TS330-1600. Launched during the company’s Global Innovation Days event, the 330 Series leverages Mimaki’s cross-platform strategy, to offer a high-end yet cost effective printing solution across several sectors. The eco-solvent inkjet printers, the JV330-160 and CJV330-160, boast innovative features such as the new media changer that allows three rolls of media to be loaded simultaneously, and the XY slitter, which provides in-line X-axis and Y-axis sheet-fed cutting. The TS330-1600, which will make its international tradeshow debut at FESPA, is a sublimation printer with an improved take-up system and optional add-ons to further increase efficiency, including a 10kg ink tank supply unit and a mini jumbo roll unit.

Additionally, FESPA visitors will see Mimaki’s all new CG-AR cutting plotter.

Urbanising FESPA 2022
In line with FESPA 2022’s tagline, ‘Experience print in motion’, Mimaki’s stand will bring a vibrancy to the show, by demonstrating real-world applications alongside the machines that created them. This year will see Mimaki’s stand convey the streets of Berlin in its design, and urban inspired works by designers, including Nicky Nahafahik and Xavier Protano, all printed using various Mimaki’s printing technologies and displayed on the stand - allowing visitors experience Berlin from inside the Messe Berlin halls. Mimaki will also join forces with Dutch designer Tessa Koops to create a selection of unique fashion items, after their successful collaborations in 2019.

Celebrating Customer Success
As a centrepiece of Mimaki’s stand, the customer gallery will return to FESPA 2022, showcasing and celebrating customer samples and testimonials. There will also be live demonstrations of Mimaki’s latest technologies in dedicated sign, UV and textile application areas. The latest UV printers on display include the UJV100, and the JFX and UJF series. The acclaimed 3D printer, the 3DUJ-2207, will also return to FESPA this year to showcase the many high-quality, full-colour models, including figurines, scale models and prototypes, achievable with this cost-efficient, entry-level printer.

To answer questions about the applications and Mimaki technologies, hospitality and meeting areas will provide space for one-to-one conversations with Mimaki experts.

Source:

Mimaki / Bespoke

29.04.2022

Baldwin showcases connected process technologies at Print4All

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin Technology Company Inc. will showcase its latest high-performance color management, surface treatment, LED-UV curing, inspection, defect detection and Industry 4.0-based analytics solutions at Print4All, which is taking place May 3 to 6 at Fiera Milano in Italy.

One of its latest advances — which will be on display at Print4All — is the XP Quatro Series™ LED-UV curing module with one head and two frequencies for broader applications. It is designed to economically and efficiently cure LED-formulated printing inks and coatings on sheetfed and web offset printing presses, as well as on larger-format flexo presses and digital print engines. The XP Quatro Series LED-UV enhances print quality, while operating at top speeds, driving increased productivity and profitability.

Italy’s ACM Flexible Packaging selected Baldwin as its LED-UV partner and became one of the first flexible film converters to offer all LED-UV curing in a narrow to mid-web format. This partnership established LED-UV printing as a growing production standard in flexible packaging and labels. Today, ACM is a 100% LED-UV, non-mercury facility.

Baldwin’s Print4All booth also will showcase Industry 4.0 and industrial Internet of Things-enabled technologies that work together to achieve greater uptime, productivity and automation. Featured solutions pair sensor-gathered data with operational data from Baldwin equipment to gain live, actionable insights to improve production monitoring, so printers and converters can achieve new levels of color consistency with fewer defects and greater assurance of curing.

Other highlights in Baldwin’s booth include the Corona Slim treatment system, which ensures the exact dyne levels needed for perfect uniformity in application, and the Guardian PQV 100% Print Inspection, which provides complete print quality verification from prepress through production, reporting and archiving.

Source:

Barry-Wehmiller

Sappi at the FESPA Global Print Expo 2022 in Berlin (c) Sappi Europa
Sappi at the FESPA Global Print Expo 2022
20.04.2022

Sappi at the FESPA Global Print Expo 2022 in Berlin

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Dye Sublimation Papers that bring colour to life

At the upcoming FESPA Global Print Expo 2022 (31 May to 3 June) in Berlin, leading specialty papers manufacturer Sappi will be showcasing its extensive portfolio of coated and uncoated dye sublimation papers, containerboard and silicone base papers. At Europe’s most significant trade fair for screen and digital printing, large-format printing and textile printing, visitors to stand 4.2-D20 will have an opportunity to see for themselves the many qualities and diverse applications of Sappi’s papers:

  • Experience the comprehensive portfolio of sublimation papers
  • Learn about Sappi’s plans to support further market growth
  • See the benchmark products for corrugated board production
  • Explore the full range of silicone base papers

Investment in increasing production capacities for sublimation papers
Sappi’s theme for this year’s FESPA Global Print Expo is “Seed. Thrive. Earn.” Sappi, one of the world’s leading manufacturers of speciality papers, has indeed planted a seed by recognising the rapidly growing importance of sublimation papers for digital transfer printing. The company recently announced that it will be investing a sum in the low double-digit million euros over the next two years in the expansion of its “Centre of Excellence” for speciality papers at its Carmignano site in northern Italy. The investment aims to increase production capacity to support further growth of the dye sublimation paper business. It will also further improve the company’s first-class service, while shortening delivery times.

Comprehensive product portfolio of sublimation papers for a multitude of applications
Thanks to previous investments, Sappi is ideally positioned to offer an extensive portfolio of dye sublimation papers for digital transfer printing. These are constantly being improved and adapted to the latest market requirements and ongoing developments in sustainability. Sublimation papers are used in the fashion, home textile, sportswear and sports equipment sectors as well as in the soft signage and hard substrates industries.

This year, all papers will be displayed with new designs and materials to give visitors the best possible overview and insight into the numerous application possibilities adapted to a variety of machine types and speeds. In addition to Sappi Basejet, an uncoated sublimation paper, the complete Transjet brand product family will be presented.

High-quality containerboard products for corrugated board applications
For applications such as promotion displays, high-quality packaging or e-commerce cartons, Sappi offers a portfolio of coated and uncoated liner qualities. These guarantee brilliant colour reproduction as well as excellent contrast and improved readability. The 100 per cent virgin fibre Fusion range liners are today’s premium solutions for displays, consumer packaging, shelf-ready packaging and trays. With their homogeneous surface and high whiteness, the virgin fibre liners fulfil all the requirements for strong brand impact at POS.

A full spectrum of silicone base papers
Silicone base paper products complement Sappi’s portfolio at this year’s FESPA. Developed as release liners for self-adhesive applications such as automotive foiling, outdoor advertising and office materials, they offer exceptional siliconization properties as well as easy and efficient processing.

More information:
Sappi Europe Fespa Global Expo
Source:

Sappi Europe

Kornit Rewrites the Rules for Fashion and Textiles (c) Kornit
Shai-Shalom-Hi2
06.04.2022

Kornit Rewrites the Rules for Fashion and Textiles

  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from
  • Hundreds of designers, brands, creators, e-com platforms, manufacturers, and virtual fashion pioneers expected to attend VIP events at Kornit’s headquarters, R&D and production centers, and in major venues of Tel Aviv     
  • Kornit will unveil future technologies and solutions, including the revolutionary Kornit Apollo fully-digital mass production direct-to-garment (DTG) platform – considered a future game-changer for the mainstream mass production of fashion and apparel, a multi-billion-dollar market opportunity – constrained today by antiquated, analog, and polluting methods of production
  • Mass production of textile, traditionally off-shored, is going through an accelerated shift to near-shore production, significantly shorter production runs, lean-to-no inventory risk, and unlimited creativity and flexibility for designers and creators – all possible with Kornit’s new solution for mass production
  • Kornit will also unveil its Kornit Atlas MAX Poly – predicted to transform the multi-billion-dollar professional and recreational sports apparel and teamwear markets, suffering today from major limitations with mass customization of polyester

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a worldwide market leader in sustainable, on-demand digital fashionx and textile production, announced today the Company will present the convergence of design, technology, and sustainable fashion at Kornit Fashion Week Tel Aviv 2022, April 3rd – 6th. Rewriting the rules for fashion and textiles, the transformative event will unveil vibrant runway collections together with game-changing industry-first product and technology introductions that bring digital production to the mainstream.

The four-day event is attended by some of the top designers, retailers, brands, fulfillers, and ecommerce players, in addition to global investors and press – and will include exclusive VIP experiences demonstrating the confluence of the design, technology, and fashion worlds. Together, these three elements are central to Kornit’s 4.0 strategy, bringing sustainable, on-demand fashion to the mainstream with end-to-end workflow solutions.

Kornit Fashion Week Tel Aviv 2022

Kornit Fashion Week features an immersive runway showcase produced by worldwide fashion icon, producer, director, and entrepreneur Motty Reif. The week follows successful Kornit events in 2021 across Los Angeles, New York, Milan, and Tel Aviv – displaying the creative freedom associated with sustainable, on-demand fashion fulfillment. Attendees will experience runway events showcasing designer creativity across a broad array of collections. These fascinating collections were created in just a few weeks, unlike typical fashion and textile production processes that take over six months.

Industry-First Introductions

Looking behind the scenes at Kornit Fashion Week, attendees will witness Kornit’s disruptive mass production technology in action. Unveiled for the first time, the Kornit Apollo direct-to-garment (DTG) system addresses accelerated post-pandemic market trends for streamlined supply chains and production nearshoring. Demonstrated at an exclusive VIP event, Kornit Apollo features the Company’s proven MAX technology offering the highest retail quality combined with full automation control and integrated smart curing processes, utilizing functionality from Lichtenau, Germany-based Tesoma (Kornit’s recently announced acquisition). The solution is the most comprehensive digital, single-step end-to-end system for nearshore short-and-medium-runs mass production and offers optimal TCO and highest output per operator. The result far surpasses performance of screen printing and analog techniques. With early customer engagements in the second half of 2022, the system will be available mid-2023.

Physical and Virtual Worlds

Kornit enables customers to exchange supply chain headaches and materials waste for unsurpassed creativity and a frictionless pixel-to-parcel-to-doorstep production experience. Supported by the KornitX workflow solution, customers have access to a scalable and modular ecosystem for on-demand decorated apparel and textiles. Supporting diverse supply chain models, the infrastructure-agnostic system enables on-demand, automated production, end-to-end from initial order to package delivery.

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Source:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

13.03.2022

Baldwin to showcase key innovations at ICE Europe in Munich

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin Technology Company Inc.—a one-stop source for high-performance coating, curing, treating, cleaning and inspection solutions—will feature pioneering new technology for optimizing converting, printing and film-extrusion processes at ICE Europe, which will be held at the Munich Trade Fair Centre in Germany from March 15 to 17.

Baldwin’s innovations can help customers meet the burgeoning demand for film and packaging amid the many economic and logistical headwinds challenging the industry. In addition, Michael Stürmer, Baldwin’s Director of Strategic Accounts, will present “Back to the Future: The 100-year-old processautomation solutions the corrugated industry has overlooked, until now!” at 11:30 a.m. March 17 during the International Exhibition for the Corrugated and Folding Carton Industry, held in the same location as ICE.

Baldwin provides converters with expertise and a broad range of market-leading innovations that offer superior print results, and enhance the economic and environmental efficiency of print production processes. Solutions on display at ICE will include automated cylinder cleaning systems, corona surface pretreatment systems, LED-UV curing and IR-drying systems, hot-air dryers, rotary spray systems, and technologies for color management and defect detection, all of which increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products.

Source:

Barry-Wehmiller for Baldwin

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles
09.03.2022

Lenzing’s pavilion makes a green debut at Intertextile Shanghai Home Textiles

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

Sustainability has become a major trend in the global home textiles industry. It is more common nowadays to find natural and sustainable fibres in an extensive range of home furnishing products. From this angle, the Lenzing Group (Lenzing) will take led in a brand new pavilion at Intertextile Shanghai Home Textiles – Spring Edition. Lenzing is the world’s leading manufacturer of renewable specialty fibres, and will highlight the latest eco-friendly fibres that can meet the ever-rising sourcing demand. The fair is set to take place from 14 – 16 April 2022 at the National Exhibition and Convention Center (Shanghai).

As an upswing from the growing public awareness of environmental issues, consumers are now more willing to switch to sustainable products. According to a CottonWorks’ survey, 90% of the interviewed Chinese consumers want their home textiles to be environmentally friendly[1]. It also found that more consumers are paying attention to the fibre content that can deliver safe and sustainable home textiles.
Furthermore, the Chinese government’s ‘Outline Of the Development of the Textile Industry during the 14th Five Year Plan’, also encourages the acceleration of low cost, functional and sustainable renewable fibres in the local textile industry.

The Lenzing satellite pavilion: a one-stop platform for green home textile materials
To help home textile suppliers source a variety of eco-friendly materials efficiently, one of the fair’s long-time exhibitors is set to form a new pavilion at the upcoming Spring show. Lenzing, the Austrian brand widely known for its ecologically responsible production of specialty fibres made from renewable raw material wood, gathers seven of its local downstream supply chain manufacturers to showcase their renewable products.

Mr David Dai, Senior Commercial Director Textile China of Lenzing spoked about why they decided to organise a new pavilion at the show: “As we received positive feedback from our pavilion at Intertextile Shanghai Apparel Fabrics, our business partners from the home textile supply chain were hoping for a similar arrangement in this sector. We believe all the participating manufacturers can benefit from this pavilion by finding ways to better serve their clients and consumers.”

Brands in the Lenzing satellite pavilion will include:
•    Lenzing Group will introduce the first Carbon-zero TENCEL™ fibres which are CarbonNeutral™ certified products by Natural Capital Partner.
•    Botou Jinglun Textiles Co Ltd focuses on new fibre yarns. The company develops multi-component yarns for cotton, wool, silk and linen with combinations of MODAL, TENCEL™ fibres and various functional materials.
•    Fujian Yongtai County Huaerjin Textile Co Ltd provides high-quality, natural, renewable pure and blended yarns including TENCEL™ fibres, US cotton, Australian cotton, acrylic cotton, silk and other plant-based yarns.
•    Jiangsu Dasheng Group Co Ltd has one of the largest cellulosic fibre yarn spinning mills in China and focuses on producing top-quality home textiles.
•    Qingdao Textiles Group produces natural fibres, cellulose fibres, copper antimicrobial fibres and other nature-based materials for home and contract textiles.
•    Suzhou Zhenlun Spinning Co Ltd is an advanced enterprise specialising in regenerated cellulose yarns like ECO VERO, FSC Viscose, Circulose, Carbon Zero Yarn and more.
•    Ton Design Industrial Co Ltd produces medium and high-end bedding fabrics. The brand’s TENCEL™ Lyocell fibres and TENCEL™ fibres blend cotton series products are certified by Lenzing.
•    Wuxi Tianmu Extra Width Printing Dyeing Co Ltd mainly produces extra-wide, high-count and high-density down-proof fabrics and fabrics for bedding. The technique can handle different procedures for dealing with pure cotton, bamboo fibres, TENCEL™ fibres and other fibre fabrics.

In addition to the new pavilion, a number of other featured exhibitors will also showcase their sustainable products at the fair. This includes Cotton Council International (CCI) promoting US cotton fibres and cotton products, and Zhangjiagang Coolist Life Technology Co Ltd bringing their unique bedding products made from organic and environmental-friendly materials.

(c) Iluna Group
04.02.2022

Iluna Group attends Première Vision with its "Smart Lace System"

From athleisure to fashion, via underwear, from sarongs to bodysuits, through evening and bridal gowns, up to the world of denim and high fashion, Iluna's lace continues to expand its applications, confirming its versatility, performance and beauty. Trends run and pass quickly, but Iluna lace remains a certainty in all its forms, variations and colors. Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.
There are four main proposals presented by Iluna Group during Première Vision ( 8-10 February 2022) :

From athleisure to fashion, via underwear, from sarongs to bodysuits, through evening and bridal gowns, up to the world of denim and high fashion, Iluna's lace continues to expand its applications, confirming its versatility, performance and beauty. Trends run and pass quickly, but Iluna lace remains a certainty in all its forms, variations and colors. Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.
There are four main proposals presented by Iluna Group during Première Vision ( 8-10 February 2022) :

  • Flock in flounce or allover entirely made with recycled ingredients and equipped with endless printing possibilities, with 3D and multicolor effects that allow the inclusion in fashion, underwear and athleisure looks. All certified GRS (Global Recycled Standard).
  • Continued investment in both the Green Label and Bioline, two collections totally dedicated to innovative and responsible aesthetics. Both include lace made with the responsible 6.6 polyamide yarn Amni Soul Eco® and the degradable stretch fiber ROICA™ V550, combined with natural vegetable dyes with OEKO TEX and GOTS certifications.
  • The union of a chenille yarn blended with FSC-certified viscose and Renycle® yarn, a product obtained by recycling nylon 6, a high-value material with excellent strength, dyeing, softness and versatility, gives life to surprising new Textronic. The embossed designs with 3D effect create a cloud effect that, combined with Lurex, gives unexpected glows.
  • GRS-certified tulles printed with GREENDROP technology, the new GOTS-certified digital pigment printing system, with lower energy consumption and low water waste, thanks to an internal closed-circuit process for water recycling.
Source:

Iluna Group / C.L.A.S.S.

(c) Iluna Group
31.01.2022

"Smart Lace System" of Iluna Group at Milano Unica

  • Based on high-tech finishing, responsible materials and certified partnerships
  • With multicolored flock, zero water printing, chenille and metallic effects, the company is at the forefront in establishing a responsible lace supply chain

Legend has it that a sailor brought his beloved a seaweed from distant seas as a gift. The woman, wanting to preserve its beauty, replicated the design and holes with needle and thread. And so lace was born. Since that moment, lace has lived within the walls of churches and castles, visited race tracks and catwalks, changing shape and color according to seasons and times.

Among the companies involved in writing a new chapter in the history of lace, Iluna Group definitely stands out. Founded in 1970 from an idea of its founder Luigi Annovazzi, over the years Iluna has responded to the challenges posed by the market in terms of technology and sustainability.

Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.

  • Based on high-tech finishing, responsible materials and certified partnerships
  • With multicolored flock, zero water printing, chenille and metallic effects, the company is at the forefront in establishing a responsible lace supply chain

Legend has it that a sailor brought his beloved a seaweed from distant seas as a gift. The woman, wanting to preserve its beauty, replicated the design and holes with needle and thread. And so lace was born. Since that moment, lace has lived within the walls of churches and castles, visited race tracks and catwalks, changing shape and color according to seasons and times.

Among the companies involved in writing a new chapter in the history of lace, Iluna Group definitely stands out. Founded in 1970 from an idea of its founder Luigi Annovazzi, over the years Iluna has responded to the challenges posed by the market in terms of technology and sustainability.

Since 2017 Iluna has been using only sustainable and certified ROICA™ stretch yarns from the ROICA Eco-Smart™ family, while the percentage of sustainable references has risen from 3% in 2018 to 52% in 2021.

There are four main proposals presented by Iluna Group during Milano Unica:

  • Flock in flounce or allover entirely made with recycled ingredients and equipped with endless printing possibilities, with 3D and multicolor effects that allow the inclusion in fashion, underwear and athleisure looks. All certified GRS (Global Recycled Standard).
     
  • Continued investment in both the Green Label and Bioline, two collections totally dedicated to innovative and responsible aesthetics. Both include lace made with the responsible 6.6 polyamide yarn Amni Soul Eco® and the degradable stretch fiber ROICA™ V550, combined with natural vegetable dyes with OEKO TEX and GOTS certifications.
     
  • The union of a chenille yarn blended with FSC-certified viscose and Renycle® yarn, a product obtained by recycling nylon 6, a high-value material with excellent strength, dyeing, softness and versatility, gives life to surprising new Textronic. The embossed designs with 3D effect create a cloud effect that, combined with Lurex, gives unexpected glows.
     
  • GRS-certified tulles printed with GREENDROP technology, the new GOTS-certified digital pigment printing system, with lower energy consumption and low water waste, thanks to an internal closed-circuit process for water recycling.
19.01.2022

EFI Connect Conference highlights new Digital Print Innovations

During the 22nd annual Connect conference at the Wynn Las Vegas Resort, Electronics For Imaging, Inc. is highlighting digital print innovations, that give print businesses more capability and profit potential in a range of market applications. Display graphics inkjet offerings at Connect from the company’s leading-edge product portfolio include the new EFI™ Pro 30h production printer. Plus, Connect features the first-ever live demonstration of the new EFI Fiery® FS500 Pro digital front end (DFE) – the most-advanced print server in EFI’s 30+ year history – and the debut of the EFI Fiery Impress™ DFE, a scalable, flexible server and colour management solution for inkjet label and packaging applications as well as for inline manufacturing lines that need variable print.
                                               
EFI Connect has more than 130 break-out sessions presenting the latest tips and trends across all the industry segments EFI supports. This includes sessions addressing the growing analogue-to-digital transformation opportunities using EFI’s industrial Corrugated & Packaging, Textile, and Building Materials/Décor solutions.

During the 22nd annual Connect conference at the Wynn Las Vegas Resort, Electronics For Imaging, Inc. is highlighting digital print innovations, that give print businesses more capability and profit potential in a range of market applications. Display graphics inkjet offerings at Connect from the company’s leading-edge product portfolio include the new EFI™ Pro 30h production printer. Plus, Connect features the first-ever live demonstration of the new EFI Fiery® FS500 Pro digital front end (DFE) – the most-advanced print server in EFI’s 30+ year history – and the debut of the EFI Fiery Impress™ DFE, a scalable, flexible server and colour management solution for inkjet label and packaging applications as well as for inline manufacturing lines that need variable print.
                                               
EFI Connect has more than 130 break-out sessions presenting the latest tips and trends across all the industry segments EFI supports. This includes sessions addressing the growing analogue-to-digital transformation opportunities using EFI’s industrial Corrugated & Packaging, Textile, and Building Materials/Décor solutions.
 
EFI Connect also marks the debut of an innovative prepress product for display graphics businesses, EFI Fiery Prep-it™ software for the preparation, layout, and automated production of print-for-cut jobs. Designed to address productivity needs amid continued labour shortages, this powerful and cost-saving true-shape nesting solution reduces the time needed to nest complex objects for wide-format printing by up to 90%. Compared with competing products, Fiery Prep-it software also reduces media usage by 10% or more, helping to alleviate media supply constraints. With the media savings it generates, this affordable, effective software can pay for itself in four months or less, helping print shops become more competitive.

Kornit Digital introduces Presto MAX for sustainable on-demand production (c) Kornit Digital
20.10.2021

Kornit Digital introduces Presto MAX for sustainable on-demand production

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Presto MAX is compatible with natural fabrics, synthetics, and blends, and includes advanced algorithms for smart autonomous calibration, to deliver high-quality results with short cycle times and minimal manual interruptions or defects. The system was devised for compatibility with the KornitX global fulfillment ecosystem to enable anywhere, anytime production, supporting a true distributed production model that fulfills nearer the end consumer, eliminating time and logistical waste from the experience while empowering brands to ensure quality and consistency across all systems and production sites.

Kornit Presto MAX provides the cornerstone of a smart, efficient, sustainable EcoFactory that empowers producers to cover and integrate more parts of the process, from design to finished product, to decrease their carbon footprint, use minimum manpower, and generate less waste. This means eliminating excessive time, labor, and shipping throughout the value chain, enabling proximity production to meet the accelerated demands of a web-driven global marketplace—revealing new sales channels and clever business models to grow the business long-term.

14.10.2021

Baldwin brings new connected technology to FEFCO Technical Seminar

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

13.10.2021

Launch of EFI Reggiani TERRA Silver

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It is a 180-cm wide printer that can print up to 190 sqm per hour with eight dual-channel printheads. The printer also features:

•    A new recirculating ink system for superior reliability and minimum maintenance
•    Several printing modes to ensure maximum flexibility in terms of design capability
•    New, real-time image processing that eliminates time spent in image pre-calculations
•    A user friendly, intuitive interface
•    A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

In Fespa stand 1-G71, attendees can see the EFI Reggiani TERRA Silver print smoothly and precisely on knitted and woven fabrics. The printer’s quality is evident in its high-uniformity printing modes, and it delivers numerous features that enhance the production process, including an accurate WYSIWYG interface and flexible queue management.
 
EFI Reggiani is also a leading developer of textile inks. The EFI Reggiani TERRA pigment inks used on the Silver model deliver excellent wet and dry fastness properties and remarkable sharpness in detail. Designed to leverage EFI Reggiani digital printers’ market-proven industrial performance capabilities, these eco-friendly, water-based inks provide an extraordinary level of print durability and yield longer print head life with reduced maintenance costs. The high-performance digital pigment inks also use an innovative binder technology for fast, sustainable, and cost-competitive industrial textile printing on the widest range of fabrics. Users also gain superior print definition and colour intensity.
 
This year, EFI Reggiani celebrates 75 years of heritage and innovation in the textile world. Always committed to deliver to the market new cutting-edge technologies, EFI Reggiani has world-class products offering boosted uptime and reliability, high performance throughput, and remarkable printing uniformity and accuracy – all while helping customers increase the sustainability of their textile manufacturing activities. Green EFI Reggiani processes give users fast, complete and sustainable solutions across a broad range of textile applications.
 
In this 75th anniversary year, EFI Reggiani has also launched several other ground-breaking solutions, such as EFI Reggiani HYPER, the fastest scanning digital printer on the market, and the EFI Reggiani BLAZE, an industrial entry-level, easy-to-use printer designed to give new textile companies the opportunity to adopt digital inkjet production with a compact solution to blaze a successful path into the industry.

Source:

Electronics For Imaging, Inc.

Iluna Group with sustainable Collection at Interfilière Paris (c) Iluna Group
03.09.2021

Iluna Group with sustainable Collection at Interfilière Paris

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish. Iluna Group comes back to Interfilière Paris with an important goal: to relaunch the qualities and dimensions of sustainability.

Iluna’s new path begins with the investment in the renewal of machines, which allow it to fly higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification.

Source:

Iluna Group / GB Network

Sappi with new print products at the FESPA Global Print Expo 2021 (c) Sappi Europe
02.09.2021

Sappi with new print products at the FESPA Global Print Expo 2021

Sappi will be presenting its inkjet papers for large-format applications alongside its new Fusion Nature Plus containerboard and a variety of silicone-based papers at the FESPA Global Print Expo from 12-15 October 2021 in Amsterdam.

The new Transjet Tacky Industrial is a coated sublimation paper for digital transfer printing – specially developed for high-speed inkjet printing on highly elastic textiles. Also new in the portfolio is the Basejet uncoated sublimation paper, designed for the digital printing of fashion and home textiles, especially light-coloured designs.
Papers consist of 100% recyclable pulp and are FSC-certified.

In Amsterdam, Sappi will also be demonstrating its inkjet papers for large-format applications. Scrolljet is suitable for outdoor applications including City Light and Mega Light systems. It stands out thanks its enhanced whiteness, high colour density and good line sharpness, alongside tear resistance and UV print protection. For indoor graphics and posters, Swiss Matt reveals its unique advantages of accuracy and pin-sharp lines.

Sappi will be presenting its inkjet papers for large-format applications alongside its new Fusion Nature Plus containerboard and a variety of silicone-based papers at the FESPA Global Print Expo from 12-15 October 2021 in Amsterdam.

The new Transjet Tacky Industrial is a coated sublimation paper for digital transfer printing – specially developed for high-speed inkjet printing on highly elastic textiles. Also new in the portfolio is the Basejet uncoated sublimation paper, designed for the digital printing of fashion and home textiles, especially light-coloured designs.
Papers consist of 100% recyclable pulp and are FSC-certified.

In Amsterdam, Sappi will also be demonstrating its inkjet papers for large-format applications. Scrolljet is suitable for outdoor applications including City Light and Mega Light systems. It stands out thanks its enhanced whiteness, high colour density and good line sharpness, alongside tear resistance and UV print protection. For indoor graphics and posters, Swiss Matt reveals its unique advantages of accuracy and pin-sharp lines.

Sappi's new Fusion Nature Plus is all about corrugated packaging, POS displays, shelf-ready packaging and carrier bags.

The products from the Silicone Base Papers range – for self-adhesive applications such as car wrapping, outdoor advertising and office materials – complete this year’s Sappi FESPA Global Print Expo portfolio.

(c) Baldwin Technology Company Inc. / Barry-Wehmiller
20.07.2021

Baldwin to unveil FlexoCleanerBrush™ at SuperCorrExpo

Baldwin Technology Company Inc. will showcase a new generation of innovative technologies for optimized corrugated high-graphics package printing at SuperCorrExpo, taking place in Orlando, Florida, from Aug. 8 to 12.

The FlexoCleanerBrush™ enhances the print quality and improves worker safety in corrugated printing. The system automatically removes dust and contamination from the plate in seconds during production, without stopping the press. It also performs full end-of-job plate cleaning and drying in fewer than four minutes, enabling increased uptime and sustainability. A carbon fiber core keeps even the ultra-wide FlexoCleanerBrush to a minimal weight, and ensures cleaning is stable, uniform and consistent throughout the plate’s width. Because the system is fully automatic and spans the entire width of the plate cylinder, the FlexoCleanerBrush improves safety by eliminating routine operator contact with the machine, while also reducing the risk of cylinder nip injuries and contact with wash agents.

Baldwin Technology Company Inc. will showcase a new generation of innovative technologies for optimized corrugated high-graphics package printing at SuperCorrExpo, taking place in Orlando, Florida, from Aug. 8 to 12.

The FlexoCleanerBrush™ enhances the print quality and improves worker safety in corrugated printing. The system automatically removes dust and contamination from the plate in seconds during production, without stopping the press. It also performs full end-of-job plate cleaning and drying in fewer than four minutes, enabling increased uptime and sustainability. A carbon fiber core keeps even the ultra-wide FlexoCleanerBrush to a minimal weight, and ensures cleaning is stable, uniform and consistent throughout the plate’s width. Because the system is fully automatic and spans the entire width of the plate cylinder, the FlexoCleanerBrush improves safety by eliminating routine operator contact with the machine, while also reducing the risk of cylinder nip injuries and contact with wash agents.

Also on view in Baldwin’s SuperCorrExpo booth, the FlexoDry™ is a fully integrated IR drying system, specifically developed for corrugated flexo printing presses. It reduces energy consumption by up to 30 percent over standard IR dryers through patented Diamond IR™ lamps. The system delivers improved drying results because of a unique optical design that produces higher intensity for enhanced color definition, and reduces or eliminates marking altogether, allowing for high-speed and full-confidence printing.

Additionally, Baldwin will showcase LED-UV technology, designed by its AMS Spectral UV division for wide-format flexo corrugated box printing.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

Mimaki supports Printers Worldwide in Global Innovation Days Event (c) EMEA, Mimaki Europe B.V
17.06.2021

Mimaki supports Printers Worldwide in Global Innovation Days Event

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

A stand-out attraction of the event was the recently released 100 Series, which is priced affordably to allow printers entry into different markets, as many look to expand their portfolio in these uncertain times. The new JFX600-2513 and JFX550-2513, which debuted a few weeks prior at virtual drupa, similarly are higher end but still affordable printers, when compared to other large format UV flatbed machines in its class. 3D full colour print technology also featured heavily in the event, as Mimaki explored the exciting propositions it opens up in different markets and how the brand continues to extend the reach and accessibility of cutting-edge 3D technologies with its upcoming 3DUJ-2207 printer.

Mr. Kazuaki Ikeda, President of Mimaki Engineering commented, “I’d like to extend my thanks to everyone who joined us during this exciting new virtual event. During the pandemic, carrying on innovating has been central to Mimaki’s objectives, with eight new products having been released since October, and even more scheduled to come out over the course of this year. I hope that we can soon all meet at in-person events, once it’s safe to do so, but until then I’m excited to see the results of the continued collaboration and innovation of print industry that we saw in our Innovation Days event.”

Source:

EMEA, Mimaki Europe B.V

11.06.2021

EFI Reggiani introduces Textile Digital Printer

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

  • A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
  • Several printing modes to ensure maximum flexibility in terms of design capability
  • New, real-time image processing that eliminates time spent in image pre-calculations
  • A user friendly, intuitive interface
  • A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.
Baldwin showcases innovations for corrugated flexo printers at ConneXion (c) Baldwin, Barry-Wehmiller
20.05.2021

Baldwin showcases innovations for corrugated flexo printers at ConneXion

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

  • The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
  • The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
  • The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
  • A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

Source:

Barry-Wehmiller