From the Sector

Reset
51 results
Photo: Archroma
15.12.2023

Archroma unveils SuperSystems+ at ChromaTexChem 2023

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Archroma is bringing its most impactful planet-conscious innovations, including SuperSystems+, to ChromaTexChem 2023 in Mumbai from December 19-20.

Super Systems+ is a new set of end-to-end systems that combine processing solutions and intelligent effects for the entire textile processing workflow, from sizing to finishing. Developed for different end-use segments – from blue and colored denim to performance athletic wear, bottom weights, towels and sheeting – Super Systems+ aims to empower fashion and textile brands and mills to add value to their products while they deliver measurable environmental impact and enhance production efficiency.

Super Systems+ leverages the industry’s broadest product portfolio and authentic evidence-based data to support informed decision making. It is supported by The SafeEdge by Archroma, an online portal that gives Archroma customers and brands real-time access to product-related regulatory and compliance certifications and information, as well as the Archroma ONE WAY Impact Calculator, a process simulation and calculation tool designed and used by our textile processing experts to provide our customers and partners with an accurate estimate of the process costs, resource utilization, effluent discharge quality, and CO2 emissions of the existing production process and of the newly evaluated system. These help them to select solutions that meet their performance requirements and deliver against significant sustainability targets.

Source:

Archroma

Freudenberg: Sustainable microfiber solution for artificial leather applications (c) Freudenberg Performance Materials Holding GmbH
Evolon® sustainable microfiber coating substrate for artificial leather
19.07.2023

Freudenberg: Sustainable microfiber solution for artificial leather applications

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Freudenberg Performance Materials (Freudenberg) will be presenting new applications for its European environmentally-friendly Evolon® microfiber technology for Fall/Winter 24/25 fashion and leather goods collections at Lineapelle, from September 19-21. These include solutions for artificial leather applications suitable for the shoe, furniture and automotive industries.

Evolon® sustainable microfiber coating substrates
Evolon® microfiber fabrics are ideal coating substrates for artificial leather applications in the shoe, furniture and car industries. They are particularly suitable as a carrier material for PU and PVC coatings. Evolon® microfiber materials have non-fraying edges, which makes converting easier and quicker. They contain 80% recycled PET from Freudenberg’s in-house bottle recycling plant. Furthermore, they are manufactured with no solvent and no chemical binder in the company’s Evolon® plant located in Colmar, France. The plant is accredited according to OEKO-TEX STeP sustainability manufacturing certification and the DETOX TO ZERO criteria. European manufacturing offers logistic benefits to European customers through shorter supply chain and transport routes.

Reinforcement material for leather goods
Manufacturers of leather goods also benefit from Evolon® microfiber when they use it as a reinforcement material for original leather. It is drapable and soft and provides optimal shaping support for leather. In addition, Evolon® materials offer important sustainability advantages for the manufacturing of luxury leather bags, such as being 100% made in Europe, eco-friendly and socially-responsible production, and the use of recycled raw materials.

Source:

Freudenberg Performance Materials Holding GmbH

ERCA successfully showcased latest product at ITMA 2023 (c) ERCA
Giusy Bettoni, Matt Swartz, Fabio Locatelli and Mike Maekawa after the talk
28.06.2023

ERCA successfully showcased latest product at ITMA 2023

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

ERCA successfully showcased their latest product during the recent ITMA 2023 exhibition, taking the opportunity to share with ITMA visitors the journey that stood behind the creation of REVECOL®.

REVECOL® transforms critical waste materials (exhausted vegetable oils) into a line of innovative and responsible chemical auxiliaries destined for the entire textile industry and its various applications, offering different characteristics: circular DNA, certification, safety, high performance, competitivity and applicability on any type of textile fiber, whether virgin or recycled.

Patagonia® and trim supplier YKK teamed up with ERCA to deploy REVECOL® in their manufacturing process. This alliance was presented to ITMA visitors as an example of what the industry can achieve through collaborative practices.

The process of sharing REVECOL® with the industry really started with the announcement of ERCA’s partnership with Patagonia® and YKK and deepened during the session Upcycling Minds Think Alike moderated by Giusy Bettoni, CEO and Founder, C.L.A.S.S. (Creativity, Lifestyle and Sustainable Synergy), and which saw the participation of Matt Swartz, Color and Material Quality Manager of Patagonia®, Fabio Locatelli, Head of ERCA, Textile Specialties Business Unit and Mike Maekawa, Sales and Business Development Manager, YKK Vietnam.

Source:

ERCA

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Source:

Mimaki Europe B.V.

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

(c) Messe Frankfurt (HK) Ltd
02.06.2023

Over 366 Exhibitors at Cinte Techtextil China 2023

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

Multiple domestic and international exhibitors have confirmed their participation at Cinte Techtextil China 2023, with the European Zone playing host to FMMG and other key industry players, such as:

  • Bekaert, Belgium
  • Fil Man Made Group, Italy
  • SANITIZED, Switzerland
  • SCANTECH, France

Outside the European Zone, additional international suppliers will showcase their diverse product applications at the fairground, with categories including Coating & Bondtec (Stahl); Fibre & Yarn (Barnet); Nonwovens Equipment (Dilo); Technology & Machinery (Picanol); and Testing Equipment & Certification (TESTEX). Other European exhibitors in these categories include Autefa Solutions, Reifenhauser Heinsberg, Reifenhauser Reicofil, and SICAM.

Chinese suppliers set to complement international contingent
A comprehensive range of domestic exhibitors are eager to meet new buyers and renew old business connections at this year’s fair, including:

  • Shanghai Shenda Kebao New Materials
  • SIJIA New Material (Shanghai)
  • Zhejiang Jinda New Materials
  • Zhejiang Hailide New Material

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Source:

Messe Frankfurt (HK) Ltd

(c) Freudenberg Performance Materials Holding GmbH
28.04.2023

Freudenberg showcases Superabsorbers and Coated Foams at EWMA 2023

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Freudenberg Performance Materials (Freudenberg) is expanding its product portfolio by adding an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Further highlights at EWMA include components for more sustainable wound care, PU foams with directly applied silicone adhesives, antimicrobial systems and an innovative hydrophilic debridement foam. The global manufacturer will be welcoming visitors to Exhibition Stand from May 3 – 5 at EWMA 2023.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Further highlights
Freudenberg is also presenting the M 1714 wound pad component, one example of a sustainable solution that simultaneously delivers on performance. The dressing consists of bio-based fibers and exhibits a smooth wound contact layer. M 1714 has been evaluated for industrial compostability and conforms to ISO 13432. This enables certification of product biodegradability. Further highlights to be presented in Milan include material systems for the antimicrobial treatment of chronic wounds, including systems that do not use active substances.

Wound dressing with silicone adhesive border
With Freudenberg’s silicone coated foams, manufacturers can reduce the number of process steps, thereby avoiding waste, saving energy and simplifying the supply chain. Compared with conventional foam dressings, the Freudenberg foam product also offers higher flexibility for optimal wound bed contouring and reduces the risk of infection by preventing exudate pooling. Freudenberg is showcasing the prototype of a bordered dressing with a silicone adhesive border. In addition, the variant with an extra-strong silicone border enables longer wear time while at the same time ensuring minimal adherence to new skin that forms at the wound edges.

More effective cleansing results and greater patient comfort
Freudenberg is also showcasing an innovative hydrophilic debridement foam. It is ideally suited for use in wound cavities, offers better cleansing results and reduced risk as well as greater patient comfort.

Source:

Freudenberg Performance Materials Holding GmbH

Radici's booth at Index Graphic Radici
17.04.2023

RadiciGroup presents high-resistance sustainable nonwovens at Index

  • Spunbond, meltblown and composite structures for new market opportunities

RadiciGroup is participating with its Advanced Textile Solutions business area at Index in Geneva from 18 to 21 April 2023. Among the Group’s products showcased are spunbond and meltblown for different application sectors, such as roofing, construction, automotive, HO.RE.CA. and filtration.

“The key message we are bringing to the fair is sustainability,” noted Enrico Buriani, CEO of the Nonwovens division of RadiciGroup Advanced Textile Solutions. “Those who already know us know that, for many years, the Group has been focused on proposing low environmental impact products and processes where sustainability is scientifically measured or certified by independent third parties. Our company is dedicated to nonwovens, which, by the way, are produced using 100% renewable energy. We have expanded our portfolio of innovative solutions for customers interested in realizing projects with sustainability as an essential requirement.”

  • Spunbond, meltblown and composite structures for new market opportunities

RadiciGroup is participating with its Advanced Textile Solutions business area at Index in Geneva from 18 to 21 April 2023. Among the Group’s products showcased are spunbond and meltblown for different application sectors, such as roofing, construction, automotive, HO.RE.CA. and filtration.

“The key message we are bringing to the fair is sustainability,” noted Enrico Buriani, CEO of the Nonwovens division of RadiciGroup Advanced Textile Solutions. “Those who already know us know that, for many years, the Group has been focused on proposing low environmental impact products and processes where sustainability is scientifically measured or certified by independent third parties. Our company is dedicated to nonwovens, which, by the way, are produced using 100% renewable energy. We have expanded our portfolio of innovative solutions for customers interested in realizing projects with sustainability as an essential requirement.”

Respunsible® is a spunbond brand manufactured from recycled polypropylene. A preliminary Life Cycle Assessment (LCA) study was carried out by RadiciGroup to demonstrate the correlation between the reduction in environmental impact and the percentage increase in recycled material. The final results demonstrate that a variable percentage of from 50 to 70% recycled material leads to a reduction in CO2 emissions of from 30 to 40%, compared to a fabric made of 100% virgin material, without comprising high technical performance.

Additionally, since RadiciGroup has achieved ISCC PLUS certification (International Sustainability and Carbon Certification), it can offer bio, biocircular or circular polypropylene spunbond and meltblown nonwovens, in which the sustainable polypropylene is biomass balanced. This certification signifies traceability along the supply chain and verifies that the certified companies meet high environmental and social standards.

“Since 2020, we have had a technologically advanced meltblown production line,” Mr. Buriani concluded. “This allows us to make composite structures, sold under the brand name Radimelt®. Now our goal is to expand our filtration applications, diversifying and developing new business, for instance vacuum cleaner bags or HVAC (heating, ventilation and air conditioning) system filters, where we can meet the high efficiency and mechanical resistance demanded, thanks to our latest generation technology.”

More information:
nonwovens RadiciGroup INDEX
Source:

Radici Group

12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

17.02.2023

FiloFlow & C.L.A.S.S: "Sustainability from A to Z" at Filo

FiloFlow and C.L.A.S.S. join forces and showcase the "Sustainability from A to Z" desk at the upcoming 59th edition of Filo.

Filo and C.L.A.S.S. have always shared the commitment to a tangible sustainability of products and processes of the textile industry. The Yarn Show realizes this through the FiloFlow project, while the international eco-hub founded by Giusy Bettoni demonstrates its commitment through services that support companies in their journey towards responsible innovation.

With this shared commitment, Filo and C.L.A.S.S. are making available to the companies that will join the 59th edition of the Yarn Show a new service dedicated to information and guidance in the field of sustainability.

Within the FiloFlow Area, C.L.A.S.S. will curate the "Sustainability from A to Z" desk, designed to provide companies with an orientation about sustainability matter in textiles: from certifications to environmental impact and end-of-life measurements, the importance of ethics and the energy savings; from responsible innovation to new generation communication.

The 59th edition of Filo takes place on February 22nd and 23rd, 2023 in Milan.

FiloFlow and C.L.A.S.S. join forces and showcase the "Sustainability from A to Z" desk at the upcoming 59th edition of Filo.

Filo and C.L.A.S.S. have always shared the commitment to a tangible sustainability of products and processes of the textile industry. The Yarn Show realizes this through the FiloFlow project, while the international eco-hub founded by Giusy Bettoni demonstrates its commitment through services that support companies in their journey towards responsible innovation.

With this shared commitment, Filo and C.L.A.S.S. are making available to the companies that will join the 59th edition of the Yarn Show a new service dedicated to information and guidance in the field of sustainability.

Within the FiloFlow Area, C.L.A.S.S. will curate the "Sustainability from A to Z" desk, designed to provide companies with an orientation about sustainability matter in textiles: from certifications to environmental impact and end-of-life measurements, the importance of ethics and the energy savings; from responsible innovation to new generation communication.

The 59th edition of Filo takes place on February 22nd and 23rd, 2023 in Milan.

Source:

C.L.A.S.S

Photo Pure Denim
03.01.2023

PureDenim & Bemberg ™: “Blue di Cupro” collection at Pitti Uomo

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

In occasion of the next edition of Pitti Uomo, Bemberg™ by Asahi Kasei – the unique fiber with a circular economy footprint obtained from cotton linters through a closed-loop process ensuring certified sustainability credentials through its transparent and traceable approach- reveals a very special Bemberg™ fabrics smart range dedicated to premium denimwear.

This has been made possible thanks to the partnership with PureDenim, a leading Italian company whose strategy since 10 years is based on an entire re-design of the production system, inspired by circular economy principles that combines technology and innovative materials in order to offer the highest levels of design, innovation and real responsible values derived from an holistic approach to sustainability.
The “Blue di Cupro” collection is made with seven fabrics made with Bemberg™, either 100% Bemberg™ or in blend with cotton, wool, and it applies the most advanced Pure Denim Technologies. The Blue di cupro fabrics made with Bemberg™ will also be dyed with “Smart Indigo” an indigo dye technology internally produced by PureDenim, through a chemical-free production. The only elements involved are: water, indigo pigments, and electricity. In terms of finishing, fabrics’ looks and performances are enhanced by the “Eco Sonic” ultrasounds finishing technology which brings significant reduction of water used, increased aesthetic features and controlled discoloration. And last but not least every yarn used at PureDenim is protected by NaturalReco® a 100% natural product that completely SUBSTITUTE the use of plastic films that are one of the key causes of microplastic emission for denim application.

“Blue” seems to be the new colour of Bemberg™, in fact, the company in early November 2022 announced, at the Blue Friday initiative by UNESCO's Intergovernmental Oceanographic Commission (IOC), the achievement of the OK biodegradable MARINE certification, which guarantees the biodegradability of its products even in the marine environment, as certified by TÜV AUSTRIA, meaning a lot in the context of microplastics in water issue solutions. This Bemberg™ certification’s achievement comes on top of other key ones such as the INNOVHUB report that confirms Bemberg™ biodegradability in soil without releasing hazardous substances, the RCS by Textile Exchange, and the Oeko-Tex Standard 100 and ISO 14001 corporate certifications.

Source:

C.L.A.S.S.

(c) ECOSENSOR™ by Asahi Kasei
18.11.2022

Asahi Kasei Group celebrates 100 years at ISPO Munich 2022

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

The Japanese textile brand ECOSENSOR™ by Asahi Kasei Advance continues its eco-high tech path and joins ISPO, the influential fashion and textile fair dedicated to sportwear and athleisure-wear, as part of an Asahi Kasei space within the ISPO Brandnew area, presenting its AW 2024/2025 & SS2024 collections, made of high-tech fabrics implementing new-generation values, with the aim of keeping nature, body and mind in harmony.

2022 is a special time for Asahi Kasei as it celebrates its 100th anniversary. This year at ISPO Munich (28-30th November), Asahi Kasei Group present its innovation world featuring three of its brands: ECOSENSOR™, ROICA™ and RespiGard™.
 
ECOSENSOR™ presents 47 new references that meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™ stands out as a unique eco-high-tech performance proposition in its market. The collection covers the different market applications with 3 items for INNERWEAR, 1 for OUTERWEAR, 13 for SPORT KNIT and 30 for SPORT WOVENS.

New this season is the application of the RespiGard™ by Polypore unique membrane designed for outdoor apparel. Its innovative pore structure is too small for water droplets to penetrate but features high porosity that allows for airflow and moisture evaporation.

In order to show at best the performances and possible applications of the fabrics made with RespiGard™, ECOSENSOR™ will feature at its ISPO space an ad hoc created outfit by the outerwear brand.

Furthermore, the majority of ECOSENSOR™ fabrics are made with sustainable ingredients which are certified by international certifications such as GRS and RCS through a traceable and transparent production process and supply chain.  100% of the stretch articles (representing 35% of the collection) are made with ROICA™ EF by Asahi Kasei, the recycled stretch yarn made from pre-consumer materials. Even the dyeing and finishing phases - key moments for performancewear - have been certified by international labels such as bluesign® or OEKO-TEX® Standard 100.

Source:

ECOSENSOR™ by Asahi Kasei / C.L.A.S.S..

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

(c) Freudenberg Performance Materials
23.08.2022

Freudenberg at Lineapelle with sustainable materials for leather goods

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

The binder-free strobel material is made from 100% recycled PET. It is GRS-certified for reliable traceability. The GRS certification recognizes the share of recycled materials in the strobel material. This allows customers to calculate the total amount of recycled material in shoes. Moreover, the mono-component material itself is fully recyclable. In terms of performance, the material is lightweight and also demonstrates a high tensile strength.

Made from nonwoven fabric, the innovative crimping material optimally combines high permanent moldability and shape retention with flexibility and suppleness. This crimping material enables manufacturers to reduce their production costs, while consumers benefit from increased comfort. Compared to conventional knitted fabric-based crimping materials, the nonwoven crimping material offers multi-directional stretching properties, improved fitting, greater design freedom and reduced weight.

Source:

Freudenberg Performance Materials

20.06.2022

Beaulieu Fibres International at Techtextil 22

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

  • Bio circular Fibre - Shaping Sustainable Living

The European staple fibre producer Beaulieu Fibres International turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at Techtextil 22. A key priority is innovation in polyolefin fibres and bicomponent polyester/polyolefin fibres, to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

The new sustainability roadmap - Route 2030 outlines how the company is targeting the reduction of our environmental footprint to zero, taking care of people and doing business in a transparent, ethical way. Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications and to work towards a circular economy with the whole supply chain.

Beaulieu Fibres International will offer ISCC Plus (International Sustainability and Carbon Certification Plus) certified bio circular MONO-PP and BICO PP/PE fibres in 1,3-8,9 dtex, available with all the main available finish classes. These drop-in solutions, with no loss in quality, will support customers reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications, contributing to the transition towards a circular economy.

Source:

Beaulieu Fibres International

(c) Officina39
08.06.2022

Offina39 attends Denimsandjeans India

  • Officina39’s Trustainable™ collection FW 23: key innovation highlights.
  • The Trustainable™ collection FW 23 presents SMART 03 and Aqualess Fade

Officina39 is attending the fourth edition of Denimsandjeans India in Bangalore (8-9 June 2022). As the show displays the GREENABLE (green and comfortable) aspects of denim, Officina39 did want to have missed the opportunity to show its latest technologies included in the Trustainable™collection FW23.

For Officina39, “Trustainable” is a term that expresses the company’s approach based on honesty, transparency and social responsibility: this attitude once again characterizes the technologies that
have given shape to the Trustainable™ collection FW 23.

The latest technological addition to the line is represented by the new Ozone Booster SMART 03, which assures more final bluish indigo shades than the other boosters on the market, activating the
reaction of Ozone on indigo without any strong oxidizing agent. Better results, less aggressive bleaching.

  • Officina39’s Trustainable™ collection FW 23: key innovation highlights.
  • The Trustainable™ collection FW 23 presents SMART 03 and Aqualess Fade

Officina39 is attending the fourth edition of Denimsandjeans India in Bangalore (8-9 June 2022). As the show displays the GREENABLE (green and comfortable) aspects of denim, Officina39 did want to have missed the opportunity to show its latest technologies included in the Trustainable™collection FW23.

For Officina39, “Trustainable” is a term that expresses the company’s approach based on honesty, transparency and social responsibility: this attitude once again characterizes the technologies that
have given shape to the Trustainable™ collection FW 23.

The latest technological addition to the line is represented by the new Ozone Booster SMART 03, which assures more final bluish indigo shades than the other boosters on the market, activating the
reaction of Ozone on indigo without any strong oxidizing agent. Better results, less aggressive bleaching.

The new collection also marks the debut of Aqualess Fade, a technology that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which reduces resource consumption and environmental impact.

This newest innovation completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 in fact stands out as the first and only player to receive, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

More information:
Officina+39 Officina39
Source:

Officina39

(c) Officina39
10.05.2022

Officina39 returns to Bangladesh Denim Expo with latest sustainable developments

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Aqualess Fade completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 received, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

Bangladesh Denim Expo is also ideal for presenting the results of The Circle Book 2, the second chapter of a collective project gathering ten high-profile players of the textile supply chain. Officina39’s Recycrom™ technology and the expertise of Meidea, Lenzing, Tejidos Rojo, Calik Denim, Ribbontex, Spring85, Dr. Bock Industries, Crafil and RGT have merged together on the development of CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials: a practical demonstration of how the fashion industry can improve considering social and environmental impacts and goals.

Source:

Officina39 / Menabò Group srl

Beaulieu International Group
24.03.2022

Beaulieu Fibres International at IDEA®22

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

  • Complete fibre portfolio for geotextiles, hygiene & wipes, floor coverings, automotive, upholstery, filtration, RTM and construction
  • Increasing nonwoven & engineered fabric performance with new fibres that reduce carbon footprint & support design for recycling
  • Exploring new possibilities for collaboration using BFI’s expertise, pilot line and equipment

 Beaulieu Fibres International, the largest and most differentiated European staple fibre producer, turns the spotlight on future-focused solutions for nonwovens & engineered fabrics at IDEA®22, 28-31 March. A key priority is innovation in polyolefin and BICO fibres to advance sustainable design, end-of-life recyclability, and resource and carbon footprint reduction for industrial and hygiene applications.

Sustainability is key to Beaulieu Fibre International’s long-term strategy, and the company is heavily focused on defining its green portfolio to support evolution in diverse market applications.

Bio-based fibres
From June 2022, Beaulieu Fibres International will offer ISCC+ certification on mono-PP and BICO PP/PE fibres. The fibres will be offered in 1,3-8,9 dtex and will be available with all the main available finish classes (ie. hydrophilic, hydrophobic, etc.) suitable for the main carding and consolidation technologies. These drop-in solutions with no loss in quality will support customers looking to reduce reliance on virgin fossil carbon in their nonwoven and engineered fibre applications. The bio-based fibres enable customers to contribute to the transition towards a circular economy.

Achieving material savings
For customers in industrial segments like geotextiles, high-tenacity HT8 staple fibres enable customers to achieve nonwovens for construction projects with high mechanical performance but with 15% less weight. The durability of the fibres means that customers can use less raw material for a longer service lifetime, supporting more sustainable design in addition to resource reduction.
For hygiene nonwovens, the Meralux fibres provide significant sustainable design advantages. Meralux fibres deliver substantial sustainability benefits including around 55% savings in raw materials, with equivalent carbon emission savings. These emission savings are thanks to weight reduction in nonwovens with the same coverage level and also the higher recyclability of PP/PE compared to BICO materials.

Source:

Beaulieu International Group

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa (c) DUARTE
Duarte outfits for FW 22/23 collection - Cream Teddy Coat
14.03.2022

C.L.A.S.S. ICON 2021 Winner DUARTE Returns to ModaLisboa

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

  • DUARTE  brings on the runway its SEASON 2 “Eco-Street Dance” collection

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers.  The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub at ModaLisboa after a first presentation at Milan Fashion Week. From February 24th until 27th, Duarte’s creations have been featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption). 

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style that we can name “Eco-Street Dance”. The color palette explores the dark shades of grey, cream, blue and black, with artistic pops of color of a hopeful urban culture that tears apart posters from the past and turns them into a new brighter story. 

Talking about materials, the collection presents a selection of urban pieces for everyday superheroes, fighting against environmental issues - with a holistic approach to sustainability values thanks to the synergy with C.L.A.S.S. and its Back in the Loop area: a section dedicated to alternative and sustainable sourcing against the massive amount of materials and textiles produced that are not used and discarded by the fashion system. This is mostly powered by MAEBA International - and its ReLiveTex® fabrics - leader in selecting and repurposing premium Italian fabrics with exceptional 60 years of expertise in collecting high quality materials from leading brands and textile manufacturers, and the first company at an international level to be accredited for the UNI EN ISO 14021 certification which grants the traceability of the collected materials.

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process. Entirely made in Japan, it comes with Compostability and Ecotoxicity Certifications verified by Innovhub SSI, RCS, OEKOTEX® Standard 100 and the Eco Mark certifications. The factory is ISO 14001 certified, too. 

C.L.A.S.S. ICON 2021 winner DUARTE returns to Milan Fashion Week launching its SEASON 2 “Eco-Street Dance” collection as a special feature at White Sustainable Milano inside the “Unveiling the fashion backstage” event (c) DUARTE
DUARTE SEASON 2 “Eco-Street Dance”
09.03.2022

DUARTE returns to Milan Fashion Week

  • C.L.A.S.S. ICON 2021 winner DUARTE returns to Milan Fashion Week launching its SEASON 2 “Eco-Street Dance” collection as a special feature at White Sustainable Milano inside the “Unveiling the fashion backstage” event

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers
The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

  • C.L.A.S.S. ICON 2021 winner DUARTE returns to Milan Fashion Week launching its SEASON 2 “Eco-Street Dance” collection as a special feature at White Sustainable Milano inside the “Unveiling the fashion backstage” event

By mixing C.L.A.S.S. responsible materials, colorful prints, urban feels and artistic inspiration, the Portuguese streetwear brand creates a new style and a clear yet cool message for conscious fashion consumers
The rewarded 2021 C.L.A.S.S. Icon Award Portuguese brand Duarte is ready to presents its Fall/Winter 2022/23 collection developed in collaboration with C.L.A.S.S. Eco Hub during Milan Fashion Week. With the support of WHITE, Duarte’s creations will be featured as a special project at WSM (WHITE Sustainable Milano) platform space inside “Unveiling the fashion Backstage”, a docu-event focusing on an immersive journey into the amazing world of premium and smart supply chains that make innovative and responsible fashion wardrobes a reality.

For its second collection Duarte still counts on C.L.A.S.S. support in sourcing materials and communication activities as part of the Icon Award yearly program. The streetwear designer Ana Duarte, with the help of the Milanese hub, is back with a renewed collection that counts 40 pieces continuing the concept and the story behind the previous World Keeper: the irresistible superhero Tadao - Ana Duarte’s dog – fighting against the environmental issues created by mankind and personified as Smog Man (air pollution), Fire Man (climate change), Deforestation Man (forests destruction) and Wave Man (water overconsumption).

This time the inspiration is also Street Dance drawn directly from the city streets, with majorly unisex pieces (apart from some small specific details linked to sizes or ergonomics) and materials that both respect the planet and keep you warm. The prints drawn from ripped posters giving birth to a sort of new style that we can name “Eco-Street Dance”. The color palette explores the dark shades of grey, cream, blue and black, with artistic pops of color of a hopeful urban culture that tears apart posters from the past and turns them into a new brighter story. 

The linings complete the full sustainable picture, thanks to Bemberg™ by Asahi Kasei fabrics by Gianni Crespi Foderami. Bemberg™ is a new generation material made from the smart-tech transformation of cotton linter pre-consumer material, converted through a traceable and transparent closed loop process. Entirely made in Japan, it comes with Compostability and Ecotoxicity Certifications verified by Innovhub-SSI, RCS, OEKO-TEX® Standard 100 and the Eco Mark certifications. The factory is ISO 14001 certified, too.

The collection will mark the return of Duarte’s cool and responsible style to Milan Fashion week and White Sustainable Milano. “We are proud to support Duarte as her style, her creations, visual communication and message are so beautiful, innovative and responsible. On top of that, her message to the consumer is so clear and easy for everybody to understand. With Duarte it is very easy to make a “conscious choice” without any sacrifice, and completely in line with the C.L.A.S.S. manifesto” says Giusy Bettoni, C.L.A.S.S. CEO & founder.