From the Sector

Reset
16 results
(c) Swiss Textile Machinery Swissmem
16.02.2024

Recycled fibres: Swiss manufacturers for circularity

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Source:

Swiss Textile Machinery Swissmem

Sorted and cut textile waste ready for tearing © SBO EVENT
Sorted and cut textile waste ready for tearing
01.12.2023

First automated textile waste sorting and recycling line in France

Partnership between Nouvelles Fibres Textiles, Pellenc ST and ANDRITZ promotes circular economy for textiles.

France’s first industrial plant for automated sorting and recycling of textile waste was officially inaugurated at Nouvelles Fibres Textiles, Amplepuis, on November 30, 2023. The plant is the result of an ambitious partnership between textile recycling company Nouvelles Fibres Textiles, waste sorting specialist Pellenc ST and international technology group ANDRITZ, a specialist in textile recycling machinery and processes.

Capable of automatically sorting garments by composition and color, the new line meets the needs of both post-consumer and post-industrial waste markets. The line also removes hard parts such as buttons and zippers to prepare the material for further processing in an ANDRITZ tearing machine.

The automated textile sorting line at Nouvelles Fibres Textiles is dedicated to industrial-scale production, customer trials and projects, and the R&D activities of the partners. It will process textile waste to produce recycled fibers for the spinning, nonwovens, and composites industries.

Partnership between Nouvelles Fibres Textiles, Pellenc ST and ANDRITZ promotes circular economy for textiles.

France’s first industrial plant for automated sorting and recycling of textile waste was officially inaugurated at Nouvelles Fibres Textiles, Amplepuis, on November 30, 2023. The plant is the result of an ambitious partnership between textile recycling company Nouvelles Fibres Textiles, waste sorting specialist Pellenc ST and international technology group ANDRITZ, a specialist in textile recycling machinery and processes.

Capable of automatically sorting garments by composition and color, the new line meets the needs of both post-consumer and post-industrial waste markets. The line also removes hard parts such as buttons and zippers to prepare the material for further processing in an ANDRITZ tearing machine.

The automated textile sorting line at Nouvelles Fibres Textiles is dedicated to industrial-scale production, customer trials and projects, and the R&D activities of the partners. It will process textile waste to produce recycled fibers for the spinning, nonwovens, and composites industries.

Automated sorting was the last missing link needed to develop a complete ecosystem in France, where the fashion industry, social and solidarity economy actors, waste management companies, and textile producers from different sectors are working together towards a textile circular economy.

The EU's strategy for sustainable and circular textiles aims to ensure that by 2030 textile products are made to a great extent of recycled fibers and incineration and landfilling of textiles are minimized.

09.06.2023

EURATEX: Meeting about Industry 5.0 concept

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

The keynote speakers, Francesco Pinto (Chairman, Yamamay) and Claudio Cavacini (Director of Retail Industry Solutions & Strategy, Salesforce), presented how the digital transformation is affecting companies in the retail industry and how they should adapt to maintain their competitive edge. A panel session of textile machinery manufacturers debated how their companies can help delivering this transformation through state of the art machineries. They all agreed that it requires common efforts by all actors and stakeholders along the textile value chain and public support to make the necessary investments. According to Enzo Maurer, ITMA President, ITMA 2023 in Milan will exactly showcase excellence in innovation and new available technologies to make a leap forward in sustainability.

According to Sergio Tamborini, "we are particularly honored to host this event organized by Euratex, the association which is the voice of the European textile industry and its demands, especially those concerning the circular economy. Sistema Moda Italia wants to play its part and there are priorities, from legislation on extended producer responsibility (EPR) in Italy to eco-design, where textiles and clothing will act as a testing ground. SMI's goal will be to continue to encourage the debate on circularity  promoting it in all institutional settings aiming to a growing sustainable  supply chain.”

Alberto Paccanelli, EURATEX President added: “Today’s discussions showed that we are ready to take up new challenges. Nevertheless, this  transition towards a textiles 5.0 can only happen with the support of all actors, from policy makers to retailers. Today’s meeting was also the occasion to review the EU transition pathway for the textiles ecosystem, published yesterday by the European Commission. The pathway is the perfect example of a co-creation process between the European institutions and the stakeholders. We hope that other EU initiatives or legislative proposals will follow the same co-creative process.”

Source:

EURATEX

(c) EREMA
07.06.2023

EREMA presents a new solution for PET fibre-to-fibre recycling

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

PET is regarded as a key material for the production of synthetic fibres. Around two thirds of the total volume of PET goes into the production of PET fibres for the textile industry. This highlights the importance of high-quality recycling solutions for the circular economy. By combining proven INTAREMA® technology with a new IV optimiser, EREMA succeeds in processing shredded PET fibre materials heavily contaminated by spinning oils in such a way that the finest fibres can be produced again from the recycled pellets. The system, which now joins EREMA's machine portfolio as the INTAREMA® FibrePro:IV, is characterised by a longer residence time of the PET melt. This is an essential factor for achieving high quality recycled pellets, as it allows the spinning oils and other additives used to improve the handling of the fibres during manufacturing to be removed more efficiently than in conventional PET recycling processes. Following extrusion, by polycondensation the intrinsic viscosity (IV) of the PET melt is increased in the new IV optimiser and under high vacuum to the precise level that is needed for fibre production. "Including filtration the output quality that we achieve with this recycling process is so high that ultra-fine fibres of up to 2 dtex can be produced using these rPET pellets, with an rPET content of 100 percent," says Markus Huber-Lindinger, Managing Director at EREMA. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

While the focus of the fibre and textiles application is currently still on PET fibre recycling, EREMA is committed to driving forward the recycling of mixed fibre materials from classic textile recycling collection in a next project phase. In order to accelerate development work, the EREMA Group opened its own fibre test centre, where a cross-company team is working on recycling solutions for fibre-to-fibre applications. The centre also operates a fully equipped and variable industrial-scale recycling plant. It includes the peripheral technology required and is available to customers for trials.

More information:
EREMA ITMA Fibers Recycling
Source:

EREMA Group

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Source:

Mimaki Europe B.V.

24.05.2023

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials
Source:

VDMA e.V.

13.03.2023

ITMF-Webinar series on “Digital Workflow" and the “Circular Textile Economy"

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

ITMF has invited some of the start-ups that have presented at the ITMF Annual Conference 2023 to share in more depth during a series of interactive webinars their digital platforms/tools and how companies can benefit from digital workflows. The first webinar with the start-up “ColorDigital” took place in the first half of February. The second webinar will take place in March with the start-up “Frontier.Cool”.

In cooperation with the “Institut für Textiltechnik” (Institute for Textile Technology) of RWTH Aachen University, ITMF has developed a series of webinars that will have a closer look at the concept, political and legal environment as well as technology regarding circularity and recycling in the textile industry. In six webinars of 60-75 minutes each, international experts will discuss the backgrounds and potential of circularity in the textile industry. The webinar series start in March and will be completed by the end of May 2023.

The webinars are free of charge for ITMF members and all their affiliated members.  

Please check the Textination schedule for all details.

Source:

Institut für Textiltechnik (ITA) of RWTH Aachen University

 

20.01.2023

Third edition of the project "CirculART"

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Art meets sustainable fashion in the third edition of the project "CirculART", the initiative that sees companies, artists and fashion designers working together with Cittadellarte - Fondazione Pistoletto, showing how new balanced forms of production, design and sharing can be explored through a careful choice of materials and of sustainable supply chains. Three key concepts underpin the circularity of sustainable fashion and therefore this project: Reduce - reducing the consumption of raw materials, Reuse - reuse of raw materials, Recycling - regeneration.

The project CirculART is conceived and developed in collaboration between Fashion B.E.S.T. and UNIDEE Residency Programs, and led by the Foundation's team of curators.

Fashion B.E.S.T. - Better Ethical Sustainable Think-Tank, Cittadellarte - Fondazione Pistoletto’ sustainable fashion office, was created by artist Michelangelo Pistoletto and Franca Sozzani. Since 2009, B.E.S.T. has been working on the development of sustainability in the textile sector, to lead to a contamination between art, which assumes social responsibility, and the world of fashion, which is looking to define a new ethical and sustainable model.

CirculART proposes a new link between fashion and art, engaging both in a conscious and innovative combination of sustainability, sensitivity, beauty and union. The project links territory and production factories, bringing together actors from the different sectors making up the textile supply chain that work on the basis of a circular economy with companies that have chosen to embrace the ideal of sustainability and develop an innovative business model.

The protagonists of this year’s edition are two international artists and two international fashion designers, selected through an open call launched by Cittadellarte: Augustina Bottoni, Lucia Chain, Huge Sillytoe and Rebecca Sforzani, young talents called upon to create a work with fabrics produced by partner companies, focusing on dialogue and on the enhancement of the textile industry production chain.

In early 2023, the programme will give the four selected artists the opportunity to visit and work actively with the partner companies that have joined the initiative.
These are: Achille Pinto S.p.a, manufacturer of textiles and textile accessories for the main international fashion brands; Albini Group, Europe's largest manufacturer of cotton fabrics for shirts; Erica Industria Tessile, a leading company in the creation of textile prints, original and customised designs; Filatura Astro, eco-sustainable regenerated yarns; G2B S.r.l., a chemical and environmental analysis laboratory working with vertical cultivation from which indigo is obtained; Lampo by Ditta Giovanni Lanfranchi S.p.A., leader in the creation and production of zips for fashion; Lanificio Fratelli Cerruti, a Biella-based weaver for haute couture; Lenzing, world leader in the production of fabrics made from fibres derived from renewable wood raw material; Milior, a producer of high quality fabrics; Officina +39 – Chemistry plus creativity, a chemical company with thirty years' experience dedicated to research and chemical application in textiles; Tessuti di Sondrio, a factory inspired by the century-old local textile tradition of processing cotton, linen, hemp and wool; Tintoria Emiliana, garment-dyed production and sustainable practices; Zegna Baruffa Lane Borgosesia, a manufacturer of 100% Made in Italy fine combed and carded yarns.

 

Source:

Officina +39 / Menabò Group srl

12.12.2022

ANDRITZ recycling line for agricultural plastic waste nets

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

RecyOuest, France, has successfully started up the world's first recycling line for agricultural plastic waste nets at its mill in Argentan. The innovative recycling line featuring a unique dry-cleaning system was delivered, installed and commissioned by the international technology group ANDRITZ in August 2022.

RecyOuest, based in Argentan, France, is a green economy company that handles the recycling contaminated filamentary thermoplastics such as round bale nets and twines. With its recycling process, RecyOuest is part of a circular economy approach.

The ANDRITZ recycling line can process up to 8,000 tons of waste and produce recycling fibers for nonwoven applications and also for pellets made of waste from agricultural single-use plastic nets and twines. These pellets are then returned to the plastics industry by mixing both recycled and virgin raw materials, thus reducing the amount of virgin plastic used.

This line, inspired by the techniques from textile wastes recycling, is equipped with a unique mechanical dry-cleaning system that allows resource savings by avoiding the use of water and chemicals. This state-of-the-art ANDRITZ equipment allows RecyOuest to produce recycling fibers for nonwoven applications and also pellets for ever new eco-designed nets and twines for the agricultural sector, with the lowest possible environmental impact.

Source:

ANDRITZ AG

(c) Robin Inizan – Lucas Pavy Production
Tearing line by ANDRITZ in operation at the Renaissance Textile plant
11.11.2022

Renaissance Textile starts up the first textile recycling line by ANDRITZ in France

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

The new clothing produced based on this type of circular economy model thus reflects the social and sustainability commitments of Renaissance Textile in terms of decarbonizing the textile industry, the fight against global warming, autonomy in raw material sourcing, and promotion of local staffing, particularly for people who have been unemployed for a long time or are seeking to enter the labor market for the first time. By 2025, for example, Renaissance Textile plans to create no less than 110 direct jobs.

Dr. Harald Weber and Thomas Waldmann. Photo: VDMA
from left to right: Dr. Harald Weber and Thomas Waldmann.
08.11.2022

VDMA Textile Machinery Association: Dr Harald Weber succeeds Thomas Waldmann

Dr. Harald Weber will become the new managing director of the VDMA Textile Machinery Association on 1 January 2023. The 44-year-old industrial engineer succeeds Thomas Waldmann, who has held the position since 1991 and will retire at the end of the year.

After completing his doctorate at the Technical University of Darmstadt and working as a lecturer at the University of Applied Sciences Mittelhessen (THM), Dr. Weber joined the VDMA in 2011. Since then, he has been responsible for the topics of technology and innovation in the Plastics and Rubber Machinery Association.

Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, commented on the change of personnel: "From his previous work in the plastics industry, Dr. Weber has profound knowledge and experience in topics that are also gaining in importance in textile machinery manufacturing. Examples include recycling and the circular economy, as well as digitalisation and especially the communication standard OPC UA."

Dr. Harald Weber will become the new managing director of the VDMA Textile Machinery Association on 1 January 2023. The 44-year-old industrial engineer succeeds Thomas Waldmann, who has held the position since 1991 and will retire at the end of the year.

After completing his doctorate at the Technical University of Darmstadt and working as a lecturer at the University of Applied Sciences Mittelhessen (THM), Dr. Weber joined the VDMA in 2011. Since then, he has been responsible for the topics of technology and innovation in the Plastics and Rubber Machinery Association.

Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, commented on the change of personnel: "From his previous work in the plastics industry, Dr. Weber has profound knowledge and experience in topics that are also gaining in importance in textile machinery manufacturing. Examples include recycling and the circular economy, as well as digitalisation and especially the communication standard OPC UA."

Dr. Horn added: "We combine our warm welcome to Dr. Weber with a big thank you to Thomas Waldmann. 30 years as managing director at the Textile Machinery Association also stand for constantly changing framework conditions. Mr. Waldmann has always had his finger on the pulse of the industry and, together with his team, has represented the special interests of the member companies: From technology policy to challenges of market access to the leading trade fair ITMA and the European association CEMATEX. ITMA 2007 in Munich was certainly a highlight. The executive board of the association wishes Mr. Waldmann all the best for the new phase of his life that is now beginning."

Source:

VDMA e. V.
Textile Machinery

Photo: Andritz/Recypur
02.09.2022

New mattresses made of industrial & post-consumer foam waste

  • Recypur successfully starts up a complete airlay line delivered by ANDRITZ for its mill in L’Alcúdia, Spain

The airlay line is designed for recycling of post-industrial and post-consumer foam and was developed specifically for the bedding and furniture industry, with material heights reaching 20 cm and densities of up to 120 kg/m3. Experimental tests carried out together with experts from ANDRITZ Laroche led to the conclusion that the mechanical method for recycling polyurethane is the most versatile and reliable.

With a capacity of 1.2 t/h, this airlay line enables Recypur to supply new mattresses made of industrial & post-consumer foam waste from old mattresses. This well proven process allows to reduce the environmental impact, increase self-sufficiency and eventually reduce the use of polyurethane. Such a set-up also allows multiple functional materials to be incorporated into the blend, such as flame-retardant, conductive and insulating fibers, among others. Thanks to this tailored approach, Recypur is now able to expand its diversification, innovation and reputation on the Spanish market.

  • Recypur successfully starts up a complete airlay line delivered by ANDRITZ for its mill in L’Alcúdia, Spain

The airlay line is designed for recycling of post-industrial and post-consumer foam and was developed specifically for the bedding and furniture industry, with material heights reaching 20 cm and densities of up to 120 kg/m3. Experimental tests carried out together with experts from ANDRITZ Laroche led to the conclusion that the mechanical method for recycling polyurethane is the most versatile and reliable.

With a capacity of 1.2 t/h, this airlay line enables Recypur to supply new mattresses made of industrial & post-consumer foam waste from old mattresses. This well proven process allows to reduce the environmental impact, increase self-sufficiency and eventually reduce the use of polyurethane. Such a set-up also allows multiple functional materials to be incorporated into the blend, such as flame-retardant, conductive and insulating fibers, among others. Thanks to this tailored approach, Recypur is now able to expand its diversification, innovation and reputation on the Spanish market.

The scope of supply includes a blending line with five feeders, an Exel 1500 for fine opening, an Airlay Flexiloft+ with 2.20 m working width, a recycling machine and an oven.

Airlay lines strongly support the circular economy and are part of ANDRITZ’s comprehensive product portfolio of sustainable solutions that help customers achieve their own sustainability goals in terms of climate and environmental protection.

Recypur, based in the Spanish province of Valencia, is part of DELAX, a Spanish group specialized in manufacturing and commercialization of innovative beds and mattresses. This company is the first Spanish manufacturer of recycled flexible polyurethane foam cores from post-consumer foam waste.

Source:

Andritz AG

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

ANDRITZ delivers tearing line to Sasia Photo: ANDRITZ
Miguel Silva, CEO of Sasia, in front of the newly installed seven-cylinder Jumbo tearing line
15.02.2022

ANDRITZ delivers tearing line to Sasia

In January 2022, international technology group ANDRITZ successfully started up its latest-generation tearing line for spinning grade fibers delivered to Sasia at its Ribeirão premises, Portugal.

The scope of supply includes a seven-cylinder Jumbo tearing machine dedicated to spinning grade fibers. As the first of its kind in Portugal, the machine contains the latest ANDRITZ Laroche innovation for fiber opening, featuring a new-generation pinning configuration.

ANDRITZ has worked closely with Sasia for more than half a century, offering both cutting-edge solutions for recycling as well as every possible fine-tuning customization to support Sasia’s goals. Sasia’s plant now has four state-of-the-art ANDRITZ Laroche tearing lines.

A pioneer in the textile recycling industry since its foundation in 1952, Sasia is engaged in the circular economy with the aim of reducing textile waste by turning it into usable raw material again, increasing ability to compete as well as promoting innovation and sustainability.

In January 2022, international technology group ANDRITZ successfully started up its latest-generation tearing line for spinning grade fibers delivered to Sasia at its Ribeirão premises, Portugal.

The scope of supply includes a seven-cylinder Jumbo tearing machine dedicated to spinning grade fibers. As the first of its kind in Portugal, the machine contains the latest ANDRITZ Laroche innovation for fiber opening, featuring a new-generation pinning configuration.

ANDRITZ has worked closely with Sasia for more than half a century, offering both cutting-edge solutions for recycling as well as every possible fine-tuning customization to support Sasia’s goals. Sasia’s plant now has four state-of-the-art ANDRITZ Laroche tearing lines.

A pioneer in the textile recycling industry since its foundation in 1952, Sasia is engaged in the circular economy with the aim of reducing textile waste by turning it into usable raw material again, increasing ability to compete as well as promoting innovation and sustainability.

This order not only underlines ANDRITZ’s position as the leading supplier worldwide of textile recycling lines, but also highlights its ability to bring continuous improvement with sustainable solutions and versatility to its customers.

Source:

ANDRITZ AG

22.10.2021

VDMA Textile Machinery publishes position paper

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In the new position paper, the executive board of the VDMA Textile Machinery Association emphasises that the new framework must be practicable. Ms Brückner said: “The EU must strike the right balance between necessary, yet also minimal, legislative regulation. A successful transition requires a level playing field which sets out fair rules for sustainability, thereby enabling European companies to nonetheless increase their international competitiveness.”

You can find the complete position paper in the attachment.

Source:

VDMA e. V

Starlinger recoSTAR universal 165 H-VAC iV+ (c) Starlinger & Co Gesellschaft m.b.H.
15.09.2021

Recycled polyester filament yarn made in Turkey

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

Korteks, one of the world’s biggest yarn producers based in Bursa, Turkey, has started the production of recycled polyester filament yarn in its production facility using a Starlinger recycling line.

With the new recycling facility, which comprises a total closed area of 17,000 m² and has a monthly production capacity of 600 tons, Korteks was able to reduce the production waste at its virgin PES yarn site to zero.

The Starlinger recoSTAR universal 165 H-VAC iV+, which is part of Korteks’ 10 million dollars investment in a new polymer recycling facility, took up operation in May 2021. It has a production capacity of 7,200 tons per year and currently processes clean in-house polyester fibers from production scrap together with washed post-consumer PET flakes at a ratio of 50/50. Korteks uses the polyester regranulate at a share of 100 % for its new polyester filament yarn line it is going to market under the name “TAÇ Reborn”. With this investment, the company has made an important step towards establishing a circular economy in the Turkish textile industry.

The Starlinger recycling line is the first of its kind in Turkey and is equipped with special components for filament yarn recycling. A RSC (Rapid Sleeve Changer) candle filter developed by Starlinger ensures finest melt filtration down to 15 μm. It has been specially designed for polyester recycling and reaches an output of 1000 kg/h. For continuous operation the filter elements are changed “on the fly” without interrupting production, which significantly limits melt loss.

The viscoSTAR SSP unit at the end of the recycling process guarantees consistent IV increase according to the first-in-first-out principle. This makes sure that the produced regranulate has the ideal properties required for filament yarn production. The technical configuration of the line does not only allow the processing of a polyester fiber/PET flake mix as input materials, but also 100 % polyester filament scrap or 100 % PET bottle flakes.

Korteks expects the recycling market in general to grow as there is increased acceptance for recycled products in the society, and predicts the need for recycling solutions also for other synthetic and natural fibers.

Source:

Starlinger & Co Gesellschaft m.b.H.