From the Sector

Reset
7 results
Photo: Monforts
The new seven chamber Montex TwinAir stenter range with Montex®Coat coating at the plant.
26.10.2022

Dolinschek: Compression stockings in a variety of colours

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The identification of profitable new niche markets has been central to the success and continuous expansion of Germany’s Dolinschek, a leading knitting, dyeing and finishing specialist, located in Burladingen in Baden-Württemberg.

“There is so much more to textiles than just clothing,” says Theo Dolinschek, who runs the company with his brother Erwin. “We handle many different technical materials such as automotive components, geotextiles and wallcoverings, but also those for more unusual applications such as inlays for extractor hoods, cut protection fabrics and even wool felts which are employed as insulation on wind turbines.

“We have also recently started to produce compression stockings in a variety of colours, because not everyone wants them black, beige or skin coloured. The most important product areas for us now are in sportswear, corsetry and lingerie, as well as orthopedic and medical products, workwear and protective clothing, but in addition, many other technical applications.”

The Dolinschek brothers moved their business to the historic site of the former Ambrosius Heim textile company in Burladingen in 2001 in order to expand. At the time, the company – founded by their father in 1980 as a textile wholesaler before moving into dyeing – employed just 13 people. Within a year, the company had bought additional space at the site.

Now, with Theo in charge of technology and sales, and Erwin responsible for production, the company employs almost 100 people and operates on an integrated site of 35,000 square metres.

In 2005, a laminating department was established by the company and since 2012 investment in knitting machines has been ongoing.

“The further we went into vertical integration, the more of our own products we were able to position on the market and so we were also able to make ourselves more independent,” says Theo. “We have continued to develop and today we can produce high-quality fabrics for many fields, with 42 knitting machines, 36 dyeing machines, three stenter frames and many other production and processing machines.”

Dolinschek has also developed its own proprietary TMG dyeing machines which have subsequently been successfully sold to many other companies all over the world. There are currently 11 of these machines  in operation at the Burladingen site and around 45 installed at other companies.

For finishing technology, however, the company relies on Monforts, and has installed a new seven chamber Montex TwinAir stenter range with a Montex®Coat coating unit in knife execution, enabling the coating of dimensionally stable knitted fabrics with polyurethane or acrylate. Another unique feature is the Teflon-coated (non-stick) transportation belt through the system.

The Montex line is also equipped with integrated heat recovery and exhaust gas purification to ensure the most resource-efficient processing available on the market. The exhaust air goes from the Monforts heat recovery system into an existing air/water heat recovery system and then into an electrostatic precipitator.

Highly-intuitive Monforts Qualitex visualisation software allows all machine functions and process parameters to be assessed and controlled easily.

 

More information:
Dolinschek Monforts
Source:

AWOL Media

(c) Baldwin Technology Company Inc.
Baldwin’s Rick Stanford and Fi-Tech’s Ian Mills kick off partnership with a handshake
03.10.2022

Baldwin Technology partners with Fi-Tech to represent textile finishing technologies

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

“With the increasing demand of Baldwin’s finishing technology, we needed to find the right partner for sales promotion in the U.S. and Canadian markets for knits, wovens and non-wovens,” said Rick Stanford, Baldwin Technology’s VP Global Business Development, Textiles. “Fi-Tech of Richmond, Virginia is the perfect partner. They are well established in the textile and non-wovens industry and their portfolio of principals provides excellent synergy with Baldwin’s precision spray and plasma treater systems.”

Baldwin’s solutions are used in a wide variety of fabrics from basic jersey and fleece with softening and anti-microbial finishes to technical fabrics such as outdoor gear, military, upholstery, automotive and industrial fabrics utilizing the latest in technical finishes such as DWR, soil release, flame retardants and insect repellent among others.

Source:

Baldwin Technology Company Inc. / Adduco Communications

(c) A. Monforts Textilmaschinen GmbH & Co. KG
07.07.2022

Monforts: New orders for machines at Techtextil 2022

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

The recent Techtextil show in Frankfurt emphasised the diversity of applications for nonwovens and technical textiles, according to finishing technology specialist Monforts.

“We fielded enquiries at top management level from an extremely wide range of companies, all with very different ideas for new product applications during the show,” said Alexander Fitz, who joined the company a year ago as engineer for textile technologies and co-ordinator of the Monforts Advanced Technology Centre (ATC). Fitz brings a background in both technical textile technology and processes to the role, having previously worked for a nonwovens machinery builder and a roll-goods manufacturer.

Trials
“We are now looking forward to interesting new trials and pilot production runs, as well as the commissioning of new orders for machines resulting from the extremely busy exhibition,” he says. “Obviously, everyone at the moment is looking to make energy savings, and we have developed a range of options for helping companies increase their resource efficiency, both on new lines and as retrofitted systems, but this is not stifling innovation at the new material level.

“There was a lot of interest in what is possible with the Montex®Coat coating system and the range of different techniques it enables, and at our ATC in Mönchengladbach, a Montex®Coat unit is integrated into the full technical textiles pilot line, on which it is possible to run new fabrics in widths of up to 1.8 metres.”

Explosion proof
The technical textiles line at the ATC incorporates a Montex four-chamber stenter and is fitted with an explosion-proof coating application chamber in order to allow treatment to be carried out with organic solvents and other volatile materials.

Every single component within the chamber has to meet the standards of the European Union’s ATEX directives for working in a potentially explosive atmosphere. A range of sensors linked to alarms operate at various levels within the chamber to ensure the specified lower explosion limit (LOL) is never exceeded and the ventilation adapts accordingly.

Advanced functions
Special features on the finishing line relate to further advanced functions such as the ability to treat materials not only at temperatures of up to 320°C, but also to be able to treat the top and bottom faces of certain materials at different temperatures within a single pass through the machine.

To achieve this, the first two chambers of the stenter are fitted with special, heavy duty TwinAir ventilation motors and separate burners for individual top/bottom temperature. A temperature differential of up to 60°C can be achieved between the upper and lower nozzles within the chamber, depending on the treatment paramenters.

Another key feature of the technical textiles line at the ATC is the special stretching device which is capable of pulling ten tons in length and ten tons in width – a huge amount per square metre of fabric and necessary in the production of materials such as woven or 3D knits for high temperature filter media.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Archroma and Jeanologia Launch Eco-conscious Denim Cleaning (c) Archroma
Archroma and Jeanologia launch an eco-advanced alternative to the denim cleaning process, one of the most water intensive and pollutant processes of denim fabric finishing.
19.01.2022

Archroma and Jeanologia Launch Eco-conscious Denim Cleaning

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, joined forces to launch an eco-advanced alternative to the denim fabric washing process, including in some cases the mercerization, one of the most water-intensive and pollutant processes of denim fabric finishing.

It all starts with the spinning step where the cotton is turned into yarn. The second step is a pretreatment that will prepare the yarn for the dyeing step. The dyed yarn then goes through the sizing process, which is a treatment preparing it for weaving. At this stage, we have obtained a denim fabric that will go through a few more steps. First, the fabric may undergo a washing treatment or, in some cases, mercerizing treatment which consists of treating it with caustic soda in order to obtain a more lustrous, flat and less reddish blue and black denim.

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, joined forces to launch an eco-advanced alternative to the denim fabric washing process, including in some cases the mercerization, one of the most water-intensive and pollutant processes of denim fabric finishing.

It all starts with the spinning step where the cotton is turned into yarn. The second step is a pretreatment that will prepare the yarn for the dyeing step. The dyed yarn then goes through the sizing process, which is a treatment preparing it for weaving. At this stage, we have obtained a denim fabric that will go through a few more steps. First, the fabric may undergo a washing treatment or, in some cases, mercerizing treatment which consists of treating it with caustic soda in order to obtain a more lustrous, flat and less reddish blue and black denim.

In both traditional ways to clean the fabric, washing or mercerizing, multiple highly water intensive washings are required in order to restore optimal fabric pH and remove unfixed dyestuff and any undesired deposits or impurities from the fabric. One of such impurities released in the washing process is aniline, a substance that is classified as a category 2 carcinogen and considered toxic to aquatic life.

That is why Archroma and Jeanologia decided to team up and develop an alternative to the traditional fabric cleaning process and its subsequent water-intensive and water-polluting washings.

  • The breakthrough alternative to the fabric cleaning concept presented by Jeanologia and Archroma combines the use of the aniline-free* PURE INDIGO ICON dyeing system of Archroma, and the water-free** and chemical-free “G2 Dynamic“ finishing technology of Jeanologia.
  • The Archroma/Jeanologia solution allows to create aniline-free* denim, and improve the final aspect of the fabric through a fully chemical-free and almost water-free** cleaning alternative treatment.
  • The Archroma/Jeanologia solution can also be used with additional Archroma coloration systems such as INDIGO REFLECTION or PURE UNDERTONES.

Umberto Devita, Business Development Manager at Archroma’s Competence Center for Denim & Casual Wear, who was the project leader for this new development, comments: “At Archroma, we strive to develop solutions in line with our principles of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature”. It was therefore very inspiring to work with a partner who shares the same values of developing efficient new processes to bring all know-how to our customers to maximize value – for denim that looks as good as the good it creates.”

For Jean-Pierre Inchauspe, Business Director of G2 Dynamic at Jeanologia, “this association is another step to change traditional, more polluting and water consuming processes in the textile industry for new ones using technology, improving, and boosting subsequent production stages up to the finishing of the garment, making them more efficient and allowing companies to be more competitive, increase productivity and offer a product that is completely sustainable with high quality.”

Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site (c) Sappi Europe
Sappi Label Papers Parade Label SG
12.01.2022

Sappi expands its product portfolio

  • High performing face stock paper delivers convincing results for multiple applications
  • Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site

Sappi, manufacturer of numerous packaging and speciality papers for a wide range of markets, is launching the Parade Label SG, a one-side coated face stock label paper that excels in terms of properties such as printability, opacity and stiffness, as well as with its many options for further processing.

  • High performing face stock paper delivers convincing results for multiple applications
  • Sappi product portfolio of face stock papers ist being expanded with Parade Label SG from its Gratkorn site

Sappi, manufacturer of numerous packaging and speciality papers for a wide range of markets, is launching the Parade Label SG, a one-side coated face stock label paper that excels in terms of properties such as printability, opacity and stiffness, as well as with its many options for further processing.

  • Semi-gloss face stock paper with high-quality performance characteristics
  • Suitable for a wide range of applications, e.g. labels for food, non-food, HABA and VIP
  • Available in 77, 78 and 80 gsm
  • Manufactured in Gratkorn, one of the largest and ultra-modern paper mills in Europe

Sappi offers an extensive range of base papers for wet-glue and self-adhesive labels. With its new Parade Label SG, the company is now introducing a one-side coated, semi-gloss face stock label paper that is approved for direct contact with food and that complies with DIN EN 71 for toy safety. The range of applications includes labels for food, non-food, beverages and health and beauty aids (HABA), as well as for logistics and variable information printing (VIP) due to its excellent thermal transfer printability.

The fibre-based face stock solution guarantees high-quality results in printing and finishing, through the entire production and converting chain. It features high stiffness and resilience, so the label will not be damaged and will fit accurately even after labelling.

Sappi invests in customer proximity
To ensure 100 percent availability and fast delivery of its label papers, Sappi has proactively positioned itself for the future and set the course for reliable production and seamless supply chains – with its plants in Alfeld, Carmignano and Condino. The plant in Gratkorn, where Sappi has invested in new technical equipment, has now been added to the list. With modern production facilities, from paper machines to finishing technology, as well as extensive expertise in the production of coated papers, the site has everything in place to ensure top-class products. Available capacity is being expanded gradually to include the production of Parade Label papers alongside existing graphical grades.

Because of the central location of Sappi’s production site in Gratkorn, Parade Label SG can be supplied quickly throughout Europe and beyond. The short transportation distances save greenhouse emissions and protect the environment; shorter production cycles then enable good availability and fast supply. Parade Label SG is certified for direct food contact and available in grammages of 77, 78 and 80 g/m². Sappi can provide Parade Label SG with FSC or PEFC certificates on request.

Sappi will be presenting its new developments in the field of label papers, among others, at the upcoming LabelExpo Europe in Brussels in April 2022.

(c) Brückner Trockentechnik GmbH & Co. KG
12.08.2021

BRÜCKNER successful in Turkey with stenters

The Turkish company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmaraş, one of the southernmost cities of the country. Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets.

The Turkish company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmaraş, one of the southernmost cities of the country. Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets.

The German machinery manufacturer BRÜCKNER supported the Turkish company from the very beginning. From the foundation of the dyeing and finishing plant, BRÜCKNER supplied three stenters for the finishing of the high-quality knitted fabric in 2014. Two more lines followed in 2016. For decades, BRÜCKNER has been the market leader for the finishing of knitted fabric. Especially for very fine and elastic fabric, special line configurations and technological know-how are necessary to be able to produce a high-quality end product. During the drying and heat-setting process, for example, extremely accurate and uniform temperature distribution over the entire length and width of the dryer is essential. In the BRÜCKNER stenter this is achieved, among other things, by the alternating arrangement of the thermal zones every 1.5 meters and by the proven split-flow air system.

The machine operators at ARIKAN appreciate the easy control of BRÜCKNER lines. The visualization is intuitively designed and offers many auxiliary systems for an optimized production process. In addition, significant energy savings can be achieved with just a few changes to the machine parameters.

The management at ARIKAN attaches great importance to energy saving, especially in the fabric finishing department. The drying process is one of the most energy-intensive in the entire process chain, therefore the biggest savings can be made here. These have a direct impact on the manufacturing costs of the textiles and thus on competitiveness in the market. In the meantime, talks are already in progress for another BRÜCKNER line which will include a very special feature: a combined heating system for the dryer. For many customers - and so also for ARIKAN in Turkey - e.g. steam energy is available free or very cheap. With the combined heating system developed by BRÜCKNER it is possible to use this steam energy for heating up the dryer and thus to achieve significant savings. If the available steam is not sufficient for a running process, it is automatically switched over to gas heating. This mode of operation does not only have an effect on the energy costs, but also makes a considerable contribution to environmental protection.

26.07.2021

WEKO has taken over RotaSpray GmbH

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Weko Holding GmbH has taken over RotaSpray GmbH from Oehringen with retroactive effect from January 1st, 2021 and further expands its textile segment.

With the merger of the two companies, the competencies in the field of functional wet finishing, digital printing pre-treatment and spray dyeing processes will be bundled for the textile segment. Both companies believe that these segments offer good future opportunities, because the demand for a resource-saving, CO2-reduced dyeing and finishing process for textile yarns and fabrics is increasing rapidly. Likewise the market trend of ever smaller production lot sizes per order.

RotaSpray GmbH will continue to be managed as an independent unit within the WEKO Holding Group and will focus purely on the high-quality textile sector.
WEKO has been developing and producing non-contact application systems for product optimization and surface finishing with different types of liquids and powdery substances since 1953. The areas of application are broad and the nonwovens, paper, tissue, printing, wood fiber boards, foils and metal industries are successfully supported with WEKO solutions.

Source:

Weitmann & Konrad GmbH & Co. KG