From the Sector

Reset
19 results
(c) TMAS
25.03.2024

TMAS: Microfactory for filter bags in Sweden

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

Filter bags are employed in a wide range of industrial processes and while they may be largely under the radar as products, they represent a pretty significant percentage of overall technical textiles production.
They are used in foundries, smelters, incinerators, asphalt plants and energy production plants. Other key manufacturing fields – often where dust is generated – include the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

As a further example of the scale of the industry and the high volumes of fabrics involved, one supplier has delivered a single order of 30,000 filter bags to be used for flue gas cleaning at a European power plant. The bags can also be anywhere up to twelve metres in length and frequently have to be replaced.

Source:

Textile Machinery Association of Sweden

Geschäftsklimaindex Grafik: © Gesamtmasche
Geschäftsklimaindex zum 1. Q 2024
06.02.2024

Gesamtmasche: Geschäftsklimaindex auf Allzeittief gefallen

Textiler Mittelstand ächzt unter Regulierung und Nachfrageschwund: „Das Maß ist voll“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Ein Großteil des Kostendrucks geht auf das Konto einer realitätsfernen Regulierungspolitik. Das treibt bereits jeden Tag Firmen in die Insolvenz. Wir verwalten uns zu Tode.“

Mit -25,9 Indexpunkten verzeichnet der Geschäftsklimaindex der deutschen Maschenindustrie zum 1. Quartal 2024 ein Allzeittief und spiegelt damit eine noch schlechtere Stimmung wider als im Corona-Lockdown. Die Erwartungen für die nächsten Monate sehen dabei noch düsterer aus als die Beurteilung der aktuellen Lage. Sämtliche Indikatoren – von den Umsätzen über die Erträge, Preise, Auftragseingänge bis hin zur Kapazitätsauslastung und der Personalstärke – befinden sich im negativen Bereich. Über 42 Prozent der Hersteller rechnen mit fallenden Umsätzen im In- und Ausland. Gleichzeitig erwarten drei von fünf Unternehmen weiter fallende Erträge.

Textiler Mittelstand ächzt unter Regulierung und Nachfrageschwund: „Das Maß ist voll“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Ein Großteil des Kostendrucks geht auf das Konto einer realitätsfernen Regulierungspolitik. Das treibt bereits jeden Tag Firmen in die Insolvenz. Wir verwalten uns zu Tode.“

Mit -25,9 Indexpunkten verzeichnet der Geschäftsklimaindex der deutschen Maschenindustrie zum 1. Quartal 2024 ein Allzeittief und spiegelt damit eine noch schlechtere Stimmung wider als im Corona-Lockdown. Die Erwartungen für die nächsten Monate sehen dabei noch düsterer aus als die Beurteilung der aktuellen Lage. Sämtliche Indikatoren – von den Umsätzen über die Erträge, Preise, Auftragseingänge bis hin zur Kapazitätsauslastung und der Personalstärke – befinden sich im negativen Bereich. Über 42 Prozent der Hersteller rechnen mit fallenden Umsätzen im In- und Ausland. Gleichzeitig erwarten drei von fünf Unternehmen weiter fallende Erträge.

„Die Flut von Auflagen macht das Wirtschaften am Standort unrentabel“, sagt Martina Bandte. „Für das Erfassen von Daten, das Verfolgen von Lieferketten und die Einhaltung von unzähligen Berichtspflichten wenden wir bald mehr Zeit auf als für produktive Tätigkeit. Gleichzeitig kostet uns die Aufblähung des Verwaltungsapparats Milliarden.“ Für größte Verunsicherung sorgen derzeit verschiedene EU-Gesetzesinitiativen zur Kreislaufwirtschaft und zum Öko-Design von Produkten. Dabei steht der textile Mittelstand bereits jetzt vor dem Bürokratie-Kollaps. „Helfen kann nur ein sofortiger Stopp weiterer Auflagen und Verordnungen. Alles andere ist Politikversagen. Was wirtschaftlich nicht machbar ist, ist auch nicht nachhaltig. Unternehmer, die weiterhin in unternehmerischer Eigenverantwortung und Freiheit bestehen wollen, werden das mit Nachdruck über ihre Netzwerke kommunizieren.

(c) Gesamtmasche
03.05.2023

Gesamtmasche: Deutsch-äthiopische Verbändekooperation zieht Bilanz

Die Verbändekooperation Partner Africa Ethiopia zwischen GESAMTMASCHE und dem äthiopischen Textilverband ETGAMA arbeitet seit über drei Jahren an der Intensivierung der deutsch-äthiopischen Geschäftsbeziehungen. Im Zentrum des Projekts stehen Qualitätsverbesserungen und der Aufbau nachhaltiger, transparenter Wertschöpfungsketten – vom Baumwollfeld angefangen. Kurz vor Abschluss der vom Bundesentwicklungsministerium geförderten Initiative ziehen die Partner Bilanz: Der Projekterfolg ist da, auch wenn die Rahmenbedingungen vor Ort schwierig bleiben.

Auf seine Textilbranche setzt Äthiopien große Hoffnungen. Bekannt sind vor allem die staatlich geförderten Industrieparks, die ausländische Investoren ins Land holen und für Jobs sorgen sollen. Weniger bekannt und doch vielversprechend ist die große Zahl mittelständischer, oft familiengeführter Textilbetriebe. Hier setzt das Partner Afrika-Projekt von GESAMTMASCHE und ETGAMA an.

Die Verbändekooperation Partner Africa Ethiopia zwischen GESAMTMASCHE und dem äthiopischen Textilverband ETGAMA arbeitet seit über drei Jahren an der Intensivierung der deutsch-äthiopischen Geschäftsbeziehungen. Im Zentrum des Projekts stehen Qualitätsverbesserungen und der Aufbau nachhaltiger, transparenter Wertschöpfungsketten – vom Baumwollfeld angefangen. Kurz vor Abschluss der vom Bundesentwicklungsministerium geförderten Initiative ziehen die Partner Bilanz: Der Projekterfolg ist da, auch wenn die Rahmenbedingungen vor Ort schwierig bleiben.

Auf seine Textilbranche setzt Äthiopien große Hoffnungen. Bekannt sind vor allem die staatlich geförderten Industrieparks, die ausländische Investoren ins Land holen und für Jobs sorgen sollen. Weniger bekannt und doch vielversprechend ist die große Zahl mittelständischer, oft familiengeführter Textilbetriebe. Hier setzt das Partner Afrika-Projekt von GESAMTMASCHE und ETGAMA an.

Gute Baumwolle für gute Produkte
„Partner Africa Ethiopia konnte im Rahmen von Pilotmaßnahmen entscheidende Qualitäts- und Produktivitätssteigerungen zu erreichen. Ein wichtiger Ansatz war dabei die Anhebung der Faserqualität. Das war die Vorbedingung für Qualitätsverbesserungen sämtlicher weiterverarbeitender Stufen“, sagt Silvia Jungbauer, Hauptgeschäftsführerin von GESAMTMASCHE. Dazu hat das Projekt mit über 40 Farmen und Kleinbauern-Kooperativen in Äthiopien zusammengearbeitet und mehrere Erntezyklen mit Schulungen begleitet. Neben der Faserqualität ging es vor allem um nachhaltige Anbaumethoden.

Vollstufige Kette in schwierigem Rahmen
Technische Mitarbeiter aus Firmen sämtlicher Wertschöpfungsstufen erhielten Gelegenheit zu bedarfsorientierter Weiterbildung in der Spinnerei, Strickerei und Weberei. Zur Erreichung besserer Qualitäten setzte Partner Africa Ethiopia auch auf bessere Vernetzung der Betriebe. Das ebnete gleichzeitig den Weg für transparente Wertschöpfungsketten, bei denen sich die Akteure über die Stufen hinweg zurückverfolgen lassen. „Äthiopische Textilhersteller und Modemarken identifizieren sich nicht mit Billigwaren, sondern wollen mit Qualität und einer nachhaltigen Fertigung punkten“, betont Simone Louis, Projektmanager Partner Africa Ethiopia bei GESAMTMASCHE. „Zum Projektende liegen erste Garne und Stoffe und sogar schon fertige Teile wie T-Shirts oder Polos aus rückverfolgbaren Ketten vor.“

Herausforderung Lieferkettengesetzgebung
Steigende gesetzliche Anforderungen in Europa wie das deutsche Lieferkettensorgfaltspflichtengesetz und demnächst die EU-Lieferkettenrichtlinie machen es für äthiopische Firmen unumgänglich, sich mit Compliance-Themen und Zertifizierung zu befassen. Gesamtmasche arbeitet daher bereits an einem Folgekonzept, das den Schwerpunkt auf Zertifizierung und Lieferkettentransparenz legt. „Die Hürden in diesem Bereich sind hoch“, gibt Silvia Jungbauer zu bedenken. „Wir hoffen, dass unser Projekterfolg nicht durch Bürokratie und starre Auflagen konterkariert wird.“

Source:

Gesamtverband der deutschen Maschenindustrie – GESAMTMASCHE e. V.

(c) Löffler
The EC300-S collarette cutter
10.02.2023

TMAS: Svegea installs Collarette Cutter at Löffler

Svegea of Sweden – a member of TMAS, the Swedish Textile Machinery Association – has recently installed an EC300-S collarette cutter for the high speed production of tubular apparel components as well as an FA350 automatic roll slitter at the plant of Löffler, in Ried im Innkreis, Austria.

The EC 300-S collarette cutter is equipped with the computer-controlled True-Drive II and high pre-feed device, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements. It operates at speeds of up to 20,000 metres per hour. The integrated, fully automatic FA350 roll slitter FA500 roll slitter is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Svegea of Sweden – a member of TMAS, the Swedish Textile Machinery Association – has recently installed an EC300-S collarette cutter for the high speed production of tubular apparel components as well as an FA350 automatic roll slitter at the plant of Löffler, in Ried im Innkreis, Austria.

The EC 300-S collarette cutter is equipped with the computer-controlled True-Drive II and high pre-feed device, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements. It operates at speeds of up to 20,000 metres per hour. The integrated, fully automatic FA350 roll slitter FA500 roll slitter is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Sports and knitwear specialist Löffler is celebrating its 50th anniversary in 2023. Its plant in Ried houses 25 circular knitting machines and three seamless knitting machines with an annual output of around 905,000 square metres of fabric, and in addition to product development, design, cutting and some sewing are all carried out in-house.

Löffler is known for its transtex under garments, which ushered in the two-layer principle of structures combining hydrophobic polypropylene and other fibres like cotton, Modal, Tencel or merino wool.

Before transtex, endurance athletes usually wore pure cotton underwear next to their skin, which became wet over time and cooled the body down. Löffler’s two-layer fabric prevented this, since the polypropylene does not absorb moisture and instead wicks it to the outside, where it can evaporate to keep the skin dry.

Innovation has been ongoing ever since, and in December, Löffler received an ISPO Award 2022 for transtex Retr’x – its latest functional underwear made from recycled polypropylene from textile waste and a combination of recycled and GOTS-certified organic cotton. Transtex Retr’x is neither dyed or bleached and is Standard 100 by Oeko-Tex as well as Made In Green by Oeko-Tex approved.

In addition to its own branded products, the plant makes sports garments for sister company Fischer, which is also based in Ried, and is at the same time involved in significant government tender projects, including the supply of polo shirts for the Austrian Red Cross and for the German and Austrian police forces. Combined, Löffler and Fischer employ approximately 700 people in the region of Upper Austria.

Source:

TMAS by AWOL Media

(c) TMAS
30.12.2022

Climate impact mapping of Swedish textile machinery

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

  • Facility Management (heating, electricity, water, cooling agents and waste disposal).
  • Employee Mobility (commuting and company cars).
  • Business Travel (flights travel by train, rental cars).
  • Procurement (production, packaging and office materials).
  • Logistics (inbound and outbound).

Primary data is being used wherever possible and emission factors originate from internationally recognised databases such as ecoinvent and GEMIS.

The ClimatePartner measurement programme is based on the guidelines of the Greenhouse Gas Protocol Corporate Accounting and Reporting Standard (GHG Protocol), and factors in all greenhouse gases covered by the Kyoto Protocol. These are carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFC), perfluorocarbons (PFC), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3).

Each of these gases affect the atmosphere differently and remain in the atmosphere for different lengths of time. Rather than reporting on each gas separately, they are expressed as a CO2 equivalent (CO2e) for the sake of simplicity. A CO2e is essentially a conversion into a ‘global warming potential’ value that enables the influence of different gases on global warming to be compared.

Gesamtverband der deutschen Maschenindustrie - Gesamtmasche e. V.
19.07.2022

Ertragsschwund bei der Maschenindustrie: Politik soll Prioritätensetzung ändern

  • Hohe Beschaffungspreise und rückläufige Nachfrage
  • Geschäftsklima bricht ein

Die Hersteller der deutschen Maschenindustrie stellen sich auf schwierige Zeiten ein. Die Geschäftsklimaumfrage von Gesamtmasche für das 3. Quartal ergab einen drastischen Absturz der Geschäftserwartungen: Der Index fällt in den Negativbereich, die Erträge erodieren. „Viele Firmen können ihre rasant steigenden Produktions- und Beschaffungskosten nicht an die Kunden weiterreichen“, sagt Martina Bandte, Präsidentin des Gesamtverbands der deutschen Maschenindustrie. „Hohe Energiepreise, drohende Versorgungslücken und die gefährlich hohe Inflationsrate machen Unternehmen wie Verbrauchern zu schaffen.“

Mit -2,37 Indexpunkten verzeichnet der Geschäftsklimaindex der deutschen Maschenindustrie einen drastischen Absturz. Im vorangegangenen Quartal hatte er noch bei 9,28 Punkten gelegen. Negative Indexwerte wurden zuletzt im Lockdown erreicht.

  • Hohe Beschaffungspreise und rückläufige Nachfrage
  • Geschäftsklima bricht ein

Die Hersteller der deutschen Maschenindustrie stellen sich auf schwierige Zeiten ein. Die Geschäftsklimaumfrage von Gesamtmasche für das 3. Quartal ergab einen drastischen Absturz der Geschäftserwartungen: Der Index fällt in den Negativbereich, die Erträge erodieren. „Viele Firmen können ihre rasant steigenden Produktions- und Beschaffungskosten nicht an die Kunden weiterreichen“, sagt Martina Bandte, Präsidentin des Gesamtverbands der deutschen Maschenindustrie. „Hohe Energiepreise, drohende Versorgungslücken und die gefährlich hohe Inflationsrate machen Unternehmen wie Verbrauchern zu schaffen.“

Mit -2,37 Indexpunkten verzeichnet der Geschäftsklimaindex der deutschen Maschenindustrie einen drastischen Absturz. Im vorangegangenen Quartal hatte er noch bei 9,28 Punkten gelegen. Negative Indexwerte wurden zuletzt im Lockdown erreicht.

Die Hersteller fürchten vor allem um ihre Inlandsumsätze. Für die kommenden Monate rechnen ca. 40 Prozent der Hersteller mit einem schlechteren Geschäft. Ein Drittel der befragten Unternehmen beklagt aktuell rückläufige Erträge. Bis zum Herbst erwarten sogar gut 52 Prozent der Firmen weitere Ertragseinbrüche. Während derzeit noch ca. 85 Prozent der Betriebe mit ihrer Kapazitätsauslastung zufrieden sind, rechnet ein Drittel mit einer Verschlechterung im nächsten Vierteljahr.

„In Deutschland ist die Inflation so hoch wie seit über 40 Jahren nicht mehr. Schrumpfende Realeinkommen und Energieknappheit nur mit dem Ukraine-Krieg zu erklären, greift zu kurz. Die Folgen einer ideologisierten Energiepolitik und 15 Jahre ungehemmte Geldmengenexpansion schlagen jetzt bitter zurück“, kritisiert die Familienunternehmerin Bandte. „Statt Ursachenbekämpfung zu betreiben, werden teure Notfallpläne aufgelegt. Tatsächlich wächst die Belastung für Firmen und Verbraucher immer weiter. Wenn unsere Wirtschaft wieder wachsen soll, muss die Politik dringend ihre Prioritätensetzung ändern.“

Source:

Gesamtverband der deutschen Maschenindustrie - Gesamtmasche e. V.

14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

Grafik: © Gesamtmasche
13.05.2022

Gesamtmasche e.V.: Maschenindustrie unter Druck

  • Beschaffungsprobleme, Überregulierung und Inflation belasten die Branche

Die Hersteller der deutschen Maschenindustrie blicken zum zweiten Quartal des Jahres sorgenvoll in die Zukunft.  Die wirtschaftlichen Folgen des Kriegs in der Ukraine und die anhaltenden Störungen in den Lieferketten lassen die Erträge trotz befriedigender Auftragslage einbrechen. „Immer höheren Beschaffungspreise belasten die Margen“, sagt Martina Bandte, Präsidentin des Gesamtverbands der deutschen Maschenindustrie. „Dazu kommt die Kaufzurückhaltung der Konsumenten, die durch die politische Lage und die hohe Inflation verunsichert sind.“

Mit den Umsätzen im In- und Ausland und den aktuellen Auftragseingängen sind gut 95 Prozent der Maschenfirmen zufrieden. Dadurch ist der Geschäftsklimaindex der Maschenindustrie zum 2. Quartal 2022 mit 9,28 zwar noch deutlich positiv, doch verzeichnet er im Vergleich zum 1. Quartal (17,96 Indexpunkte) einen drastischen Rückgang. Die Branche erwartet in den nächsten Monaten Nachfrageeinbrüche und weiter steigende Produktionskosten.  60 Prozent der Hersteller rechnen mit einer weiteren Verschlechterung der Ertragslage.

  • Beschaffungsprobleme, Überregulierung und Inflation belasten die Branche

Die Hersteller der deutschen Maschenindustrie blicken zum zweiten Quartal des Jahres sorgenvoll in die Zukunft.  Die wirtschaftlichen Folgen des Kriegs in der Ukraine und die anhaltenden Störungen in den Lieferketten lassen die Erträge trotz befriedigender Auftragslage einbrechen. „Immer höheren Beschaffungspreise belasten die Margen“, sagt Martina Bandte, Präsidentin des Gesamtverbands der deutschen Maschenindustrie. „Dazu kommt die Kaufzurückhaltung der Konsumenten, die durch die politische Lage und die hohe Inflation verunsichert sind.“

Mit den Umsätzen im In- und Ausland und den aktuellen Auftragseingängen sind gut 95 Prozent der Maschenfirmen zufrieden. Dadurch ist der Geschäftsklimaindex der Maschenindustrie zum 2. Quartal 2022 mit 9,28 zwar noch deutlich positiv, doch verzeichnet er im Vergleich zum 1. Quartal (17,96 Indexpunkte) einen drastischen Rückgang. Die Branche erwartet in den nächsten Monaten Nachfrageeinbrüche und weiter steigende Produktionskosten.  60 Prozent der Hersteller rechnen mit einer weiteren Verschlechterung der Ertragslage.

„Wirtschaft und Verbraucher brauchen jetzt dringend Entlastung. Aber Berlin und Brüssel nehmen allen Alarmsignalen zum Trotz weiter Kurs auf noch mehr Bürokratie und Vorschriften“, kritisiert die Familienunternehmerin Bandte. „Teure und ideologisch motivierte Regulierung in der Umwelt- und Energiepolitik und eine Wohlführpolitik auf Pump ziehen uns den Boden unter den Füßen weg. Die Politik scheint sich nicht mehr für ein innovationsfreundliches und dynamisches Wirtschaftsklima in Europa zu interessieren. Das ist Gift für Wachstum und Innovation.“

 

16.03.2022

TMAS: TEXO AB sees Demand for Compfelt Weaving Looms

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

Source:

TMAS / AWOL Media

(c) Automatex / TMAS
03.03.2022

Automatex: Full automation from the roll to the finished product

Automatex, a member of TMAS, the Swedish textile machinery association, has recently supplied a number of its latest Industry 4.0-enabled automatic fitted sheet systems to customers in Europe.

The Automatex model FDC-77735-B90D-EC system enables the full production and folding of six fully-fitted sheets per minute – approaching 3,000 an average shift – overseen by a single operator and eliminating many of the repetitive cut and sew operations of the past. Elastics insertion –  usually a highly complex labour-intensive task – can be on all four sides of the sheet, two, or simply within the corners, depending on customer specifications.

Fabric is fed directly from the roll, with precise edge guiding and tension control, into a length-wise hemming and elastics insertion section with adjustable tension devices, before being measured and cross cut in an accumulator. It is then transferred to the cross hemming section, again with elastics insertion.

Automatex, a member of TMAS, the Swedish textile machinery association, has recently supplied a number of its latest Industry 4.0-enabled automatic fitted sheet systems to customers in Europe.

The Automatex model FDC-77735-B90D-EC system enables the full production and folding of six fully-fitted sheets per minute – approaching 3,000 an average shift – overseen by a single operator and eliminating many of the repetitive cut and sew operations of the past. Elastics insertion –  usually a highly complex labour-intensive task – can be on all four sides of the sheet, two, or simply within the corners, depending on customer specifications.

Fabric is fed directly from the roll, with precise edge guiding and tension control, into a length-wise hemming and elastics insertion section with adjustable tension devices, before being measured and cross cut in an accumulator. It is then transferred to the cross hemming section, again with elastics insertion.

A side drop forming unit pre-forms the sheet before it is transported by a multi-axis clamp conveyor system to the corner sewing section, consisting of left and right overlock sewing heads. Here, the corners are robotically sewn at 90 degrees and labels are also attached when specified.

Further customised systems for folding are also supplied as required.

Source:

TMAS / AWOL Media

Grafik: Gesamtmasche e.V.
Seit 2019 haben sich die internationalen Frachtraten vervielfacht. Besonders betroffen ist die Route Ostasien-Nordeuropa. Auch die Laufzeiten haben sich um 50 Prozent und mehr verlängert. Über die Hälfte der deutschen Textil- und Bekleidungsimporte stammt aus Asien, alleine auf China ca. 25 Prozent.
02.02.2022

Maschenbranche kritisiert wachsende Abgabenlast

  • „Zölle auf Fracht und Rohstoffe müssen weg“

Die Preise für textile Rohstoffe und internationale Transporte sind binnen Jahresfrist extrem gestiegen. Der Gesamtverband der deutschen Maschenindustrie fordert daher Zollerleichterungen für Rohmaterial und Fracht. „Mit dem rasanten Anstieg der Beschaffungskosten wachsen die Zollkosten im selben Tempo“, sagt Silvia Jungbauer, Geschäftsführerin von Gesamtmasche. „Steigende Abgaben in schwieriger Zeit – das muss aufhören.“

Störungen in den internationalen Lieferketten haben die Frachtraten bis auf das Zehnfache ansteigen lassen. Weil in der EU die Transportkosten mit dem Einfuhrgut mitverzollt werden müssen, erhöht sich die Abgabenlast mit steigenden Frachtpreisen. Das trifft grundsätzlich alle Branchen, doch besonders hart die Textilwirtschaft. „Im Herbst war die Lage nicht mehr kalkulierbar. Wir haben unseren Dachverband und die europäischen Schwesterverbände alarmiert.“ Inzwischen machen auch der BDI und der europäische Spitzenverband BusinessEurope mobil.  

  • „Zölle auf Fracht und Rohstoffe müssen weg“

Die Preise für textile Rohstoffe und internationale Transporte sind binnen Jahresfrist extrem gestiegen. Der Gesamtverband der deutschen Maschenindustrie fordert daher Zollerleichterungen für Rohmaterial und Fracht. „Mit dem rasanten Anstieg der Beschaffungskosten wachsen die Zollkosten im selben Tempo“, sagt Silvia Jungbauer, Geschäftsführerin von Gesamtmasche. „Steigende Abgaben in schwieriger Zeit – das muss aufhören.“

Störungen in den internationalen Lieferketten haben die Frachtraten bis auf das Zehnfache ansteigen lassen. Weil in der EU die Transportkosten mit dem Einfuhrgut mitverzollt werden müssen, erhöht sich die Abgabenlast mit steigenden Frachtpreisen. Das trifft grundsätzlich alle Branchen, doch besonders hart die Textilwirtschaft. „Im Herbst war die Lage nicht mehr kalkulierbar. Wir haben unseren Dachverband und die europäischen Schwesterverbände alarmiert.“ Inzwischen machen auch der BDI und der europäische Spitzenverband BusinessEurope mobil.  

„Textil- und Bekleidungsprodukte sind ein Hochzollbereich. Die Branche zahlt daher einen überdurchschnittlichen Zollaufschlag auf die Fracht“, erklärt Silvia Jungbauer. Auf Bekleidung sind 12 Prozent Zoll fällig. Doch auch Rohstoffe und Halbwaren sind betroffen. Immerhin 4 Prozent Zoll gelten für zahlreiche Fasern. Dabei können viele Qualitäten nur im Ausland in ausreichender Menge beschafft werden. „Am besten wäre daher eine grundsätzliche Abgabenbefreiung für Rohstoffe. Für eine bezahlbare und sichere Rohstoffversorgung brauchen wir aber unbedingt wieder mehr Rohstoffquellen am Standort. Das gilt für Natur- wie Chemiefasern gleichermaßen.“

06.01.2022

Messe Frankfurt cancels consumer goods fairs in January and February 2022

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

The four events, consisting of Christmasworld with its focus on seasonal and festive decorations, Paperworld and Creativeworld with their product ranges for paper, office supplies, stationery and hobby, craft and artists' requisites and Ambiente with its cross-sector range of products for the table, kitchen and housewares, furnishing and decorative accessories, home furnishing concepts, gifts and fashion accessories, are the recognised leading trade fairs in their sectors and open the trading year in their respective segments. Even in a reduced numerical form, the four trade fairs would still have been the leading events worldwide for their respective product segments.

However, the exponential increase in the number of infections worldwide in a very short period of time and the accompanying multitude of developments and decisions that are clearly outside the organiser's sphere of influence have led to a significant deterioration in the general conditions and necessary prerequisites for holding the four leading trade fairs as major events of international relevance at the end of January and in mid-February 2022 respectively. These developments include the classification of Germany as a high-risk area and the associated travel warnings and international and intercontinental travel restrictions in countries such as India, Japan and the United States, as well as the corresponding quarantine obligations. Equally important are the steadily rising infection figures and the accompanying urgent appeal, among others by the Robert Koch Institute and the expert council of the German Federal Government, to continue to reduce contacts to a minimum and to cancel all major events. At present, there are even further international fears that the critical infrastructure will not be maintained due to the highly contagious Omicron variant. The majority of exhibiting and visiting companies at Christmasworld, Paperworld, and Creativeworld as well as Ambiente are currently reacting to this overall situation with travel and trade fair attendance bans for reasons of duty of care towards their employees to protect them from health risks. The global willingness to travel is dropping enormously at the moment.

There are no plans to postpone the event. Detlef Braun, Member of the Executive Board of Messe Frankfurt, explains: "Since the trend-oriented order cycles of the international consumer goods industry require an annual event at the beginning of the year, a shift to the second half of the year would not meet the needs of the exhibiting companies and visitors."

Nordstil to be held in Hamburg from 15 to 17 January 2022
In the interests of the sectors involved, the planning and implementation of Nordstil from 15 to 17 January 2022 is not affected. This trade fair will take place in the Free and Hanseatic City of Hamburg at this time due to other general conditions for local implementation. However, the extremely volatile situation is continuously reviewed and assessed in close exchange with the relevant local authorities and industry partners.

Messe Frankfurt's digital platforms for business success
Messe Frankfurt has already been actively helping retailers to help themselves since 2019 with Nextrade, the first order and data management platform for the home and living sector, and Conzoom Solutions, an information platform for the global consumer goods sector. "A second year without appropriate ordering, inspiration and networking formats poses considerable and in some cases existentially threatening challenges for retailers worldwide," Braun explains. "With our digital offers, we are specifically supporting our partners in industry and trade in this volatile situation. In addition, we will continue to put all our energy and optimism into safe and promising trade fairs. Because there is no substitute for meeting in real life."

Information on the planning of the Frankfurt consumer goods fairs for 2023 will be announced at the beginning of February 2022.

Source:

Messe Frankfurt Exhibition GmbH

13.12.2021

TMAS: Digitalisation demands streamlined solutions

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

“In this context, the integration of machinery and automation specialists as single-source suppliers makes perfect sense, while partnerships between machine builders and their customers have never been more important.”

The recent acquisition of Nowo textile machinery from its previous owner, Brandstones Ab Oy, by TMAS member ACG Kinna, she adds, is a good example of this general trend.

Nowo, headquartered in Turku, Finland, designs, manufactures and exports high-end textile production machinery mainly for the fibre processing industry. At the end of the 1980s it introduced the highly successful Nowo Vac pillow filling system, which has been its best-selling system, alongside the Noworoll ball fibre machine, introduced in the 1990s.

Nowo’s machine range covers the entire production process from bale opening to weighing and filling, and complete production lines are tailored to the specific needs of customers. The company can also deliver individual machines such as bale openers, cards, cross-lappers, pickers, mixing devices, material silos, sucking devices, anti-static units etc. Seven patents cover the company’s technologies.

Founded in 1977, ACG Kinna Automatic, based in Skene in Sweden, specialises in customised and cost-efficient solutions for the production of pillows and quilts. All of its design, manufacturing and final line testing is carried out in Sweden and the reliability and longevity of its machines has earned it the trust of the world’s largest furniture and home decoration retailers and Europe’s largest manufacturer of pillows and duvets, among many customers.

Source:

TMAS / AWOL Media

(c) TMAS
The new TMAS board members (left to right) Sven Öquist, Jerker Krabbe and Semir Pavlica.
08.11.2021

TMAS has appointed three new members to its board

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

(c) Gesamtverband der deutschen Maschenindustrie – GESAMTMASCHE e. V.
29.10.2021

Gesamtmasche: Erholung mit Hindernissen

  • Gestörte Lieferketten und sinkende Margen bremsen das Wachstum  

Nach zaghafter Erholung im Sommer befindet sich die deutsche Maschenindustrie weiter im Aufwärtstrend.  Doch Probleme in der internationalen Logistik und stark gestiegene Rohstoffpreise behindern das Wachstum. „Lieferengpässe und hohe Beschaffungskosten gefährden den Aufschwung. Dazu kommt eine regelrechte Kostenlawine bei den Energiepreisen“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Dabei haben wir die Belastungen durch den Lockdown noch längst nicht aufgeholt.“

  • Gestörte Lieferketten und sinkende Margen bremsen das Wachstum  

Nach zaghafter Erholung im Sommer befindet sich die deutsche Maschenindustrie weiter im Aufwärtstrend.  Doch Probleme in der internationalen Logistik und stark gestiegene Rohstoffpreise behindern das Wachstum. „Lieferengpässe und hohe Beschaffungskosten gefährden den Aufschwung. Dazu kommt eine regelrechte Kostenlawine bei den Energiepreisen“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Dabei haben wir die Belastungen durch den Lockdown noch längst nicht aufgeholt.“

Angesichts der Erholung von Umsätzen und Auftragseingängen bleibt der Geschäftsklimaindex der Maschenindustrie zum 4. Quartal mit 14,54 Indexpunkten weiter im positiven Bereich (Indexwert zum 3. Quartal: 16,93). Vor allem aus dem Ausland erwartet die Branche in den kommenden Monaten Impulse. Allerdings klagen die meisten Hersteller über schrumpfende Margen. Über 13 Prozent der Befragten wollen daher, trotz guter Auftragslage, Personal abbauen.
 
Verbandspräsidentin Martina Bandte warnte vor einem Abwürgen der Wirtschaft durch weitere Kostenbelastungen: „Das Wachstum flacht bereits wieder ab, denn die Produktionskosten am Standort und verteuerte Auslandsbeschaffung erodieren die Margen. Nicht nur die international verschobenen Kräfteverhältnisse stellen uns vor immense Herausforderungen. Die neue Regierungskoalition steht vor einem riesigen Reformstau. Der lässt sich nur mit einer wachstumsfreundlichen Politik anpacken. Dazu muss Deutschland aufhören, mit nationalen Maßnahmen globale Fragen lösen zu wollen.“

 

Source:

Gesamtverband der deutschen Maschenindustrie – GESAMTMASCHE e. V.

25.10.2021

TMAS members showcase sustainable finishing technologies

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

TMAS: Swedish Group ACG turns 100 (c) Ismail Abdelkareem, ACG Goup
ACG’s Reimar Westerlind and Thomas Arvidsson at the company’s head office in Borås, Sweden
16.08.2021

TMAS: Swedish Group ACG turns 100

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

“What I didn’t know then was that my dining partner was the family lawyer of Carl Axel Gustafsson,” Reimar explains. “I had no money and knew nothing about the textile industry and I also quickly discovered the business was not doing so well at that time and tried to get out of the agreement, but he insisted I honour it. He told me he had money and would back me, but I’d have to work hard and pay him back in full.”

Reimar certainly took that advice, and at the age of 92 still travels to his office every day to oversee the operations of the diverse companies now operating under the ACG umbrella.

Although textiles remain the bedrock of the business, under Reimar Westerlind’s management, ACG Group has branched out into many other fields of activity over the past 60 years, and its diversity has also led to some highly unexpected developments.

Like many other European manufacturers, ACG also began to expand beyond its traditional borders from the 1970s onwards – initially into the former Soviet Union and subsequently establishing subsidiaries in Estonia, Lithuania, Finland, the Ukraine and Denmark.

14.06.2021

Swedish automation boosts Tritex sewing operations

Founded in 1952, Svegea of Sweden – a member of TMAS, the Swedish textile machinery association – has over 60 years of experience in exclusively designing, manufacturing and installing high quality collarette band cutting machines worldwide.

These are used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements, such as Triteks Trejd.

Founded in 1994, this family-owned business employs over 280 people at its plant in Prilep, North Macedonia, where high quality cotton fabrics are expertly converted into the products of the Tritex Underwear brand.

The Prilep operation encompasses the processing of fabrics, design, cutting, sewing, quality control and packing in a fully integrated workflow.

With around 200 sewing machinists, the Tritex product range encompasses briefs, boxers, slips, t-shirts, pyjamas and body slips which are primarily sold to countries within the European Union, as well as the domestic market.

Founded in 1952, Svegea of Sweden – a member of TMAS, the Swedish textile machinery association – has over 60 years of experience in exclusively designing, manufacturing and installing high quality collarette band cutting machines worldwide.

These are used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements, such as Triteks Trejd.

Founded in 1994, this family-owned business employs over 280 people at its plant in Prilep, North Macedonia, where high quality cotton fabrics are expertly converted into the products of the Tritex Underwear brand.

The Prilep operation encompasses the processing of fabrics, design, cutting, sewing, quality control and packing in a fully integrated workflow.

With around 200 sewing machinists, the Tritex product range encompasses briefs, boxers, slips, t-shirts, pyjamas and body slips which are primarily sold to countries within the European Union, as well as the domestic market.

The company has also just completed the digitalisation of its full production via the in-house DPC-SYS system, installing around 200 industrial PCs linking each of its workstations and departments.

Triteks Trejd currently operates three of the latest Svegea collarette cutting machines and is highly satisfied with their performance, as well as the service provided by the Swedish company.

12.05.2021

Gesamtmasche erweitert das Präsidium

  • Ulrike Neubauer und Gerald Rosner einstimmig kooptiert

Die Mitgliederversammlung von Gesamtmasche hat Dr. Ulrike Neubauer, CFO und Vorstandsvorsitzende der Dr. Zwissler Holding AG (Gerstetten), und Gerald Rosner, Geschäftsführer der strickchic GmbH (Apolda), einstimmig ins Präsidium kooptiert.

Der Beschluss der Mitgliederversammlung, die bereits im April online tagte, wurde nun auch im schriftlichen Verfahren bestätigt: Das Präsidium des Gesamtverbandes der deutschen Maschenindustrie wird um zwei Mitglieder erweitert.

Dr. Ulrike Neubauer ist Vorstandsvorsitzende und Finanzvorstand der Dr. Zwissler Holding AG. Die promovierte Betriebswirtin und gebürtige Berlinerin kam nach Stationen in der Unternehmensberatung, der Chemie-, Maschinenbau und der Automobilzulieferindustrie zur Zwissler-Gruppe.

Gerald Rosner ist Geschäftsführer der strickchic GmbH. Er studierte technische Kybernetik und stieg nach der Reprivatisierung des elterlichen Traditionsbetriebes in Apolda ins Textilgeschäft ein. Neben Mode entwickelt der technikaffine Stricker smarte Textilien.

  • Ulrike Neubauer und Gerald Rosner einstimmig kooptiert

Die Mitgliederversammlung von Gesamtmasche hat Dr. Ulrike Neubauer, CFO und Vorstandsvorsitzende der Dr. Zwissler Holding AG (Gerstetten), und Gerald Rosner, Geschäftsführer der strickchic GmbH (Apolda), einstimmig ins Präsidium kooptiert.

Der Beschluss der Mitgliederversammlung, die bereits im April online tagte, wurde nun auch im schriftlichen Verfahren bestätigt: Das Präsidium des Gesamtverbandes der deutschen Maschenindustrie wird um zwei Mitglieder erweitert.

Dr. Ulrike Neubauer ist Vorstandsvorsitzende und Finanzvorstand der Dr. Zwissler Holding AG. Die promovierte Betriebswirtin und gebürtige Berlinerin kam nach Stationen in der Unternehmensberatung, der Chemie-, Maschinenbau und der Automobilzulieferindustrie zur Zwissler-Gruppe.

Gerald Rosner ist Geschäftsführer der strickchic GmbH. Er studierte technische Kybernetik und stieg nach der Reprivatisierung des elterlichen Traditionsbetriebes in Apolda ins Textilgeschäft ein. Neben Mode entwickelt der technikaffine Stricker smarte Textilien.

Gesamtmasche-Präsidentin Martina Bandte freut sich über die Unterstützung im Präsidium: „Frau Dr. Neubauer und Herrn Rosner bereichern unser Gremium hervorragend. Sie vertreten ganz unterschiedliche Bereiche der Maschenbranche und repräsentieren doch gleichermaßen textile Innovationskraft, Qualität und Wertschöpfung am Standort Deutschland.“