From the Sector

UMAC, a member of the EREMA Group, is expanding its ReadyMac product line with a new 60 hertz version. This means that the immediately available plastics recycling solution can now be deployed worldwide. The standardised machine with its particularly attractive price-performance ratio will be presented in its new look for the first time at Plast Eurasia from 4-7 December 2024 in Istanbul.
    
The ReadyMac celebrated its market launch at K 2022. The recycling system, which is produced in stock and therefore available at short notice, has since established itself successfully in the 50 hertz version, particularly on the European market. Based on this success, UMAC is now also offering the ReadyMac 500 in a 60 hertz version. "The ReadyMac is suitable for a wide range of materials and degrees of contamination, processing film, flakes and regrind into high-quality recycled pellets. The fixed price of just EUR 375,000 makes it an attractive proposition," says Michael Köhnhofer, Site Manager at UMAC. The machine is produced in small series at the St. Marien site.

The ReadyMac is based on EREMA's proven TVE technology, in which degassing occurs after filtration. Equipped with a robust SW RTF® screen changer filtration system, the recycling machine processes both printed and contaminated waste. The multipurpose screw handles a wide range of materials efficiently and reliably. With a throughput of up to 500 kg/h for LDPE, LLDPE, MDPE, PP, PS, PC, ABS and up to 450 kg/h for HDPE, the ReadyMac 500 is a true all-rounder. In addition, the two frequency converters on the main drives (preconditioning unit and extruder screw) ensure consistently high throughputs and quality for a wide variety of material types, such as regrind, film or nonwoven, even without changing the screw. This enhances both flexibility and productivity. The frequency converters are now included as standard with the ReadyMac.

Fabtex Georgia 2024 International Textile Industry Fair has concluded with remarkable success, bringing together over 1,050 professional visitors from 11 countries, including Georgia, Russia, Armenia, India, China, Ukraine, Germany, Iran, Turkey, Poland, and Pakistan.

This year’s exhibition featured 52 exhibitors from Georgia, Turkey, Azerbaijan, the UAE, Uzbekistan, and China, underscoring the event's international significance.

The exhibition's exhibitor profile primarily focuses on knitted fabrics, woven fabrics, fabrics for workwear and uniforms, various accessories, garment and sewing machinery, and ready-to-wear items.

Georgia has a long-standing tradition in the textile sector, dating back to Soviet times, and is currently home to production for international brands such as Tommy Hilfiger, Zara, Moncler, and Puma.

Georgia’s strategic location at the crossroads of Western Asia and Eastern Europe, coupled with its rich textile history, makes it an ideal hub for textile manufacturing and investment. The country boasts several Free Trade Agreements (FTAs) with Turkey and CIS nations, as well as a Deep and Comprehensive Free Trade Agreement (DCFTA) with the EU, providing access to a market of approximately 900 million people without customs duties.

From 7 to 9 August 2024, the sixth edition of IFCO Istanbul Fashion Connection took place with 300 exhibitors in a total of 4 halls at the Istanbul Expo Centre.

With this event, Istanbul Fashion Connection underlines its importance as a hub for the international fashion industry. Compared to the previous year's event, the proportion of international visitors increased by 13.9%. Almost 18,000 visitors came to IFCO in Istanbul, 35% of whom came from abroad. The most represented region was Asia with 31.3%, followed by the Middle East (31.3%), Europe (16.4%), North Africa (13.4%), North America, South America and Africa together with 3.1%. High-ranking buyer groups from a total of 121 countries came to IFCO to find out about the latest fashion trends, network and place orders.

Divided into clear product areas on a total of 30,000 square metres of exhibition space in four halls, brands and manufacturers presented the latest collections from the areas of womenswear, menswear, kidswear, denim, sportswear, evening and wedding wear, lingerie, hosiery, leather and furs.

The next IFCO is planned for 5-8 February 2025.

The 15th In-store Asia 2024, a trade fair for retail resources and investment in store designs, visual merchandising and in-store marketing on the Indian subcontinent, has drawn to a successful close. From 13 to 15 June numerous exhibitors and retailers got together at the Bombay Exhibition Center in Mumbai to network and experience the latest trends and innovations in the industry.

Registering more than 5,500 trade visitors, In-store Asia 2024 exceeded all expectations and confirmed its position as a leading platform. The three trade fair days played out in a lively atmosphere with many business leads.

Solutions providers presented a comprehensive line-up of innovative products and solutions, which are required for installing modern, connected and targeted Points of Sale. Exhibits included POP and interactive displays, visual merchandising solutions and retail technologies, shopfittings complete with lighting, signage and display mannequins as well as retail designs. The event provided visitors including the decision-makers of retail brands as well as service providers, architects, designers, marketeers and retail specialists with a perfect setting for networking, exchanging ideas and forging strategic partnerships.  

Trade fair highlights included:

• VM&RD Retail Design Awards: The Awards recognised outstanding examples of retail design and visual merchandising. Over 300 submissions in 24 categories by more than 40 companies were assessed by a jury composed of international design experts.  
• VM Challenge: 40 visual merchandisers from more than 20 enterprises competed with each other in six teams in a live window-dressing competition to create imaginative decorations on the theme of “Surreal Chic” in 60 minutes.
• Focal Points: Skechers, Lifestyle, Pepe Jeans and Ace Turtle impressed participants with innovatively dressed shop windows demonstrating the strength of creative design in retail.

The next In-store Asia will be held from 22 to 24 May 2025.

drupa 2024 in Düsseldorf drew to a successful close on 7 June after eleven days. 1,643 exhibitors from 52 nations presented a showcase of innovations in the Düsseldorf exhibition halls and thrilled the trade visitors with performances. The international share of the visitors was 80%, with attendees coming from 174 countries. After Europe, Asia was the most strongly represented region with 22%, followed by America with 12%.  Asia as well as Latin America and the MENA region are markets with great growth potential, which was reflected in the significant increase in exhibitors' presence and order books.

Exhibitors praised the high level of decision-making competence of visitors. They, in turn, gave top marks to the range of products and services on offer in the 18 exhibition halls. Around 96% of all visitors confirmed that they had fully achieved the objectives associated with their visit. At over 50%, most of them came from the printing industry, followed by the packaging industry, whose share has increased significantly and which was the focus of many exhibitors as a growth driver. In total, 170,000 trade visitors attended drupa 2024.

Digitalisation
Automation took centre stage at this year’s drupa, with a strong focus on AI and smart workflows, including software solutions. It became clear that digital and analogue technologies ideally complement and benefit from each other. Traditional industry leaders presented a wide range of digital solutions, while digital pioneers integrated conventional components into their offerings. Robotics played an important role in the exhibition halls and illustrated the path towards the smart factory.

Transformation and growth
drupa made it clear that the industry has great potential for the future, even against the backdrop of many challenges, and that the prospects are promising. In the last financial year, the global printing industry achieved a turnover of around EUR 840 billion (source: Smithers) and continues to develop at varying pace worldwide.
Many new strategic alliances concluded at the trade fair reflected the opportunities that are only possible in such a concentrated form at drupa.

Sustainable technologies
Technology is the key to achieving sustainability goals - exhibitors at drupa illustrated this with numerous practice-orientated developments and concrete solutions. Top priority is given to resource efficiency and the path to a functioning circular economy. In addition, Touchpoint Sustainability from the VDMA, the German Machinery and Equipment Manufacturers’ Association, showcased current state of the art innovations, presented best-practice use cases and gave a far-reaching outlook into the future of a sustainable printing industry.

Knowledge transfer
The supporting programme with its five special forums drupa cube, drupa next age (dna) and the Touchpoints Packaging, Textile and Sustainability was well received. In times of constant change and the resulting new business models, they ensured an intensive transfer of knowledge and provided important guidance. Guided tours on various key topics rounded off the trade fair experience.

The next drupa will be held in 2028.

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

In-store Asia, a trade fair for retail resources and investments in store design, visual merchandising and in-store marketing on the Indian subcontinent will again be held in Mumbai from 13 to 15 June 2024. Over the course of the 15 years of its existence it has become established as the biggest get-together of retail decision-makers in India. Here, over 4,500 players from retail, consulting and services, manufacturers as well as retail solution providers come together.

Visitors to In-store Asia have the opportunity to discover a wide variety of exhibitors showcasing their products and solutions for the retail sectors including:

• Point-of-Purchase (POP) displays and interactive flatscreens
• Visual Merchandising (VM) and store fittings
• Signage and graphic design solutions
• Retail technologies for improving customer retention
• Tailor-made store design services
• Start-up initiatives for the retail sector

The 2-day conference at In-store Asia provides a platform for discussions about current retail trends in India and the world over. More than 40 key speakers from India and abroad will share their forecasts, latest trends and use cases on the topics of retail markets, retail experience design, sustainability, visual merchandising, retail technology and store fitting under the inspiring motto “Connected, Collaborative, Conscious”.

Highlights at the trade fair amongst others include the VM&RD Retail Design Awards and the VM Challenge, two events that honour special achievements and innovations in visual merchandising and store fitting. The VM&RD Retail Design Awards acknowledge outstanding store fitting projects in a total of 24 categories. The VM Challenge is a unique live window display contest for the visual merchandising community where six teams compete to dress a window on a given theme.

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS' global presence
In a dynamic global PET market, where the share of recycled PET will increase, CARBIOS' ambition is to become a leading r-PET player by 2035. CARBIOS has extended its international reach to boost its commercial deployment worldwide. Teams in place in key markets are dedicated to identifying business opportunities and establishing commercial partnerships for PET biorecycling technology, with first agreements expected in 2024. To date, CARBIOS is represented in three regions: Europe, North America (including Canada) and Asia (China, Japan, Korea, Singapore, Taiwan, and soon India).

The fifth edition of the Texhibition Istanbul Fabric and Textile Accessories Fair from 6 to 8 March 2024, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), presented 557 exhibitors showcasing the entire range of the textile supplying section: from woven and knitted fabrics to accessories and artificial leather. A new addition was a separate hall for yarns and denim, the BlueBlackDenim hall. With this trade fair, Texhibition has more than doubled its floor space compared to the last event to 35,000 square metres.

Exhibitors
Texhibition Istanbul acts as a central point of contact for the entire international industry, with a clear focus on quality, innovation and the latest trends like the denim companies Bossa, Çalık, İsko, İskur and Kipaş at the BlueBlackDenim Hall.

Yarn companies such as Aksa, Diktaş, Ensar, Karafiber, Kaplanlar, Korteks, Migiteks, Sasa, Tepar showed the production power of the yarn sector, where the product quality, design and workmanship came together.

In addition to well-known companies such as Almodo, Bahariye, BTD, Can Textile, Iskur, Kipaş, Menderes, Söktaş, Yünsa, Zorlu, İpeker a large number of other export-oriented companies from the segments of textiles (woven fabrics, knitting) presented their latest designs and products.

Visitors
25,752 visitors came from over 112 countries, 41.8% from the European Union (including Germany, Italy, the Netherlands, Spain, Romania etc.) and Great Britain, Ukraine,26.5% from Asia (including Russia etc.), 14.8% from the Middle East (including Jordan, United Arab Emirates, Saudi Arabia) 10.7% from North Africa (including Algeria, Tunisia etc.), 3.1% from North America (United States, Canada), 3.1% from South America and other countries.

American buyers from the USA and Canada in particular, but also a large number of Mexican and Colombian buyers took advantage of the numerous match-making opportunities at Texhibition. Many B2B meetings took place and led to numerous orders being placed, including from key accounts such as Alexander Wang, Asos, Forever 21, Sainsbury's, Veronica Beard etc.

Borealis is commemorating its thirtieth year of operations. Born of a merger between Statoil and Neste, Borealis has expanded from its early Nordic roots to become one of the top polyolefins players. Its dedication to value creation through innovation has produced proprietary and transformative technologies which benefit society and accelerate the transition to a circular economy. The company is regularly ranked as Austria's top innovator in the European Patent Index and holds an extensive patent portfolio of around 8,900 granted patents. In Europe in particular, Borealis has for decades bolstered the industrial landscape by investing in its capital assets, and by providing thousands of jobs.

Innovations
Borealis uses technological innovation to add value to polyolefin-based applications, ensure that production processes are made more resource efficient, and to accelerate plastics circularity. Borstar®, the multi-modal proprietary technology for the manufacture of polyethylene (PE) and polypropylene (PP), has been a mainstay of Borealis success since the start-up of the first Borstar PE plant in Porvoo, Finland in 1995. Borstar has since been joined by other technology brands, like Borlink™, an innovation for the power cable industry; Borstar® Nextension Technology, an innovation that among other benefits facilitates the production of monomaterial applications designed for recycling; or the Borcycle™ M technology for mechanical recycling, which breathes new life into polyolefin-based, post-consumer waste, transforming it into applications with a lower carbon footprint.

Global Expansion
With the strong support of its two majority shareholders OMV (Austria) and The Abu Dhabi National Oil Company (ADNOC, UAE), Borealis continues to expand its global footprint. The joint venture Borouge, established in 1998 in the UAE, and listed on the Abu Dhabi Securities Exchange (ADX) since 2022, is one of the largest integrated polyolefin complexes. It is currently the site of the company’s largest-ever growth project: Borouge 4, the new USD 6.2 billion facility in Ruwais, which will serve customers in the Middle East and Asia. In North America, the Baystar™ joint venture, founded in 2017 and operated with partner TotalEnergies, entailed the construction of a new ethane cracker as well as the most advanced Borstar plant ever built outside of Europe. The PE Borstar 3G plant in Pasadena, Texas was started up in late 2023 and has brought Borstar to this continent for the first time. Borealis’ commitment to Europe as a production location is evidenced by the new, world-scale propane dehydrogenation (PDH) plant currently under construction at Borealis operations in Kallo, Belgium.