From the Sector

Reset
26 results
Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic © Fraunhofer ITWM
Dr. Dietmar Hietel, Fraunhofer ITWM, Giovanni Di Lorenzo, Siriotek, und Giovanni Bettarini, bematic
05.06.2023

Fraunhofer ITWM, Siriotek und bematic bündeln Vliesstoff-Expertise

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Vliesstoffe spielen in verschiednen Branchen eine zentrale Rolle, so in der Automobilindustrie, dem Gesundheitswesen, der Medizin, dem Bauwesen oder der Filtration. Da die Nachfrage nach diesen Materialien weiter steigt, schließen sich Bettarini & Serafini S.r.l bematic, Siriotek und das Fraunhofer-Institut für Techno- und Wirtschaftsmathematik ITWM zusammen, um die Air-Lay-Technologie weiterzuentwickeln. Auf der ITMA, der Fachmesse für Textilien, Bekleidung und Innovation, stellen die drei Partner erstmals gemeinsam das Projekt vor.

Seit fast 50 Jahren ist die italienische Firma bematic in der Vliesstoffproduktion tätig. Die Entwicklung von fortschrittlicher Air-Lay-Produktionsprozesse steht bei dem Unternehmen im Fokus sowie die Konstruktion, Herstellung und Prüfung von Hochleistungskardieranlagen für Vliesstoffe. Die Ingenieure des Schweizer Unternehmens Siriotek konzentrieren sich auf Simulationen und Tests, die die praktische Problemlösung unterstützen. Das Fraunhofer ITWM bringt sowohl Wissen als auch Erfahrung in der Textiltechnik und der Prozessoptimierung ein und steuert Know-how in der mathematischen Modellierung sowie Charakterisierung von Air-Lay-Prozessen für Stapelfasern bei.

Die drei Partner wollen gemeinsam die nächste Generation von Krempelmaschinen entwickeln, die Leistung und Qualität bei der Air-Lay-Verarbeitung mit Stapelfasern gewährleisten und gleichzeitig Energieverbrauch, Abfallerzeugung und Kohlenstoffemissionen reduzieren. Die Zusammenarbeit bündelt das Fachwissen und die Innovationskraft der Dreien in ihren jeweiligen Bereichen.
 
Schneller, dichter, effizienter
Air-Lay-Technologien sorgen für die thermische, mechanische und chemische Vliesverfestigung. Hierbei wird das Rohmaterial geöffnet und mit einer Walze in einen Luftstrom eingebracht. Dieses Luft-Faser-Gemisch landet auf einem Band und wird dort durch Absaugung verdichtet. »Durch einen gemeinschaftlichen Ansatz erweitern wir die Grenzen der Air-Lay-Technologie, um höhere Produktionsgeschwindigkeiten, eine bessere Gleichmäßigkeit des Vlieses und eine bessere Faserausnutzung zu erreichen sowie letztendlich Lösungen zu liefern, die vollständig auf die individuellen Produktionsanforderungen zugeschnitten sind«, erklärt Giovanni Di Lorenzo, Gründer und Chefingenieur von Siriotek.
 
Zusätzlich minimiert das Projekt so den ökologischen Fußabdruck, ohne dabei die Leistung zu beeinträchtigen. »Wir treiben den Fortschritt voran, verbessern die Produktionsqualität und tragen zu einem nachhaltigeren sowie effizienteren Ökosystem in der Textilindustrie bei«, ergänzt Dietmar Hietel, Leiter der Abteilung »Transportprozesse« am Fraunhofer ITWM. Auch Giovanni Bettarini, Partner und kaufmännischer Leiter bei bematic, ist vom Projekt überzeugt: »Durch diese Zusammenarbeit werden wir in der Lage sein, unseren Kunden Fertigungslösungen für verschiedene Anwendungen in den Bereichen Automobil, Bau, Filtration und Geotextilien anzubieten.«

Source:

Fraunhofer ITWM

Photo: Naturopera
22.05.2023

ANDRITZ converting line for baby diapers at Naturopera, France

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

International technology group ANDRITZ has successfully delivered, installed, and commissioned a converting line for manufacturing baby diapers at Naturopera’s new plant in Bully Les Mines, France.

The eXcelle converting line from ANDRITZ Diatec features special technology to produce both traditional and bio-based baby diapers, supporting Naturopera in its efforts to become a leading producer of a new generation of sustainable diapers.

While most diapers available on the market consist of 70% fossil-based plastic, Naturopera is preparing to produce diapers made of 90% bio-based raw materials. This groundbreaking diaper concept was developed in a close collaboration between Naturopera and ANDRITZ. It replaces the traditional spunbond and meltblown nonwoven layers with spunlace nonwovens mostly made of natural fibers. A prototype of the 90% bio-based diaper was recently produced at Bully Les Mines.

The ANDRITZ converting machine operating at Naturopera is highly flexible, taking just a few settings to switch to the production of bio-based diapers. It is designed for a multiple-size process, features an operator-friendly interface, and guarantees a production speed of 800 ppm.

Naturopera is a French company producing baby care, femcare and household products with a strong focus on local production and sustainability.

Source:

Andritz AG

(c) Trützschler Nonwovens
20.06.2022

Trützschler Nonwovens presents solutions for needle-punched nonwovens

Trützschler Nonwovens & Man-Made Fibers GmbH started a cooperation with the Italian textile machinery manufacturer Texnology S.r.l. in the field of needle-punching technology. With immediate effect, the companies will offer complete production lines for needle-punched nonwovens under the name of T-SUPREMA.

Web bonding with steel needles represent the largest production process in the drylaid nonwovens segment. The areas of application are predominantly of a technical nature, with the largest applications being durable geotextiles, automotive textiles and filter media. The high adaptability of the needling and finishing processes as well as the broad material base result in a large number of different end products. Needle-punching is suitable for a wide range of man-made and natural fibers including mineral and high-performance fibers.  

Trützschler Nonwovens contributes its many years of experience in fiber preparation and web forming to the cooperation. Texnology is mainly responsible for the needle-punching process. Joint projects can thus build on a broad application expertise.

Trützschler Nonwovens & Man-Made Fibers GmbH started a cooperation with the Italian textile machinery manufacturer Texnology S.r.l. in the field of needle-punching technology. With immediate effect, the companies will offer complete production lines for needle-punched nonwovens under the name of T-SUPREMA.

Web bonding with steel needles represent the largest production process in the drylaid nonwovens segment. The areas of application are predominantly of a technical nature, with the largest applications being durable geotextiles, automotive textiles and filter media. The high adaptability of the needling and finishing processes as well as the broad material base result in a large number of different end products. Needle-punching is suitable for a wide range of man-made and natural fibers including mineral and high-performance fibers.  

Trützschler Nonwovens contributes its many years of experience in fiber preparation and web forming to the cooperation. Texnology is mainly responsible for the needle-punching process. Joint projects can thus build on a broad application expertise.

A first joint project has already been successfully completed, implemented and put into operation.

Source:

Trützschler Nonwovens

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

(c) BVMed
16.06.2022

BVMed setzt sich für adäquate Inkontinenzversorgung ein

Der Bundesverband Medizintechnologie (BVMed) setzt sich im Rahmen der Welt-Kontinenz-Woche vom 20. bis 26. Juni 2022 dafür ein, die adäquate Inkontinenzversorgung aller Patient:innen sicherzustellen. „Bei Inkontinenz-Patient:innen mit Behinderung kann die Behandlung besonders anspruchsvoll sein, das muss sich in den Versorgungsprozessen und -verträgen widerspiegeln“, erläutert BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung. Eine weitere Herausforderung für die Versorgung sei der zunehmende Preisdruck auf Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung aufgrund des zunehmenden Spagats zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen. „Wir müssen gemeinsam mit den Krankenkassen Lösungen finden, damit eine adäquate Inkontinenzversorgung sichergestellt werden kann“, fordert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie (BVMed) setzt sich im Rahmen der Welt-Kontinenz-Woche vom 20. bis 26. Juni 2022 dafür ein, die adäquate Inkontinenzversorgung aller Patient:innen sicherzustellen. „Bei Inkontinenz-Patient:innen mit Behinderung kann die Behandlung besonders anspruchsvoll sein, das muss sich in den Versorgungsprozessen und -verträgen widerspiegeln“, erläutert BVMed-Expertin Juliane Pohl, Leiterin des Referats Ambulante Versorgung. Eine weitere Herausforderung für die Versorgung sei der zunehmende Preisdruck auf Hersteller von Hilfsmitteln zur aufsaugenden Inkontinenzversorgung aufgrund des zunehmenden Spagats zwischen sinkenden Erstattungspauschalen und steigenden Produktionspreisen. „Wir müssen gemeinsam mit den Krankenkassen Lösungen finden, damit eine adäquate Inkontinenzversorgung sichergestellt werden kann“, fordert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

„Raus aus der Tabuzone“, so lautet das Motto der bundesweiten Aktionswoche im Rahmen der Welt-Kontinenz-Woche. Das Ziel: Über die Volkskrankheit Inkontinenz aufklären sowie Betroffenen Mut machen, sich mit der eigenen Erkrankung auseinanderzusetzen und sie behandeln zu lassen. Denn von den laut aktuellen Angaben der Deutschen Kontinenz Gesellschaft 10 Millionen Menschen in Deutschland mit Harn- oder Stuhlinkontinenz wendet sich über die Hälfte der Betroffenen nicht an einen Arzt oder eine Ärztin. Wird die Erkrankung nicht behandelt, verstärken sich die Beschwerden mit negativen Folgen auf die Lebensqualität und Psyche.

Dabei unterscheidet sich laut dem BVMed die Versorgung mit aufsaugenden Inkontinenzhilfen von Menschen ohne Behinderung deutlich von der Versorgung von Menschen mit Behinderung. Beispielsweise sei die Inkontinenz-Behandlung bei Patient:innen mit infantilen Cerebralparese, Trisomie 21, Korea Huntington oder körperlichen Behinderungen besonders anspruchsvoll. So können fehlende Produkttoleranz, motorische Unruhe und fehlendes Verständnis für den Produkteinsatz zu einem höheren Produktverbrauch führen.

20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.

(c) Reifenhäuser
01.04.2022

Reifenhäuser Reicofil showed sustainable Nonwovens at IDEA 22

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwovens line specialist Reifenhäuser Reicofil presented its portfolio of high-performance and sustainable nonwovens under the slogan "Living Nonwovens" at IDEA 22 at the Miami Beach Convention Center in Florida from March 28 to 31, 2022.

In terms of sustainability, Reicofil offers various approaches to save fossil raw materials, such as the processing of bio-based raw materials as an ecological alternative - for diapers, for example. Here, the topsheet material, made of bulky, soft, and industrially compostable High Loft nonwovens, meets maximum hygiene requirements. For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste.

Another highlight was the so-called BiCo technology. In this process, two different raw materials are combined in one fiber in the spunbond process, creating a bimetal effect and causing the fiber to crimp. This opens the door for manufacturers to completely new product properties that are unattainable with monofibers.

Nonwoven-film composites with low grammage
For the medical sector, Reicofil showcased its leading solutions for high-barrier medical protective clothing and - together with its sister business unit Reifenhäuser Cast Sheet Coating - the pioneering Ultrathin Coating production process, which enables customers to produce film-nonwoven-composites more cost-effectively and thus competitively.

Smart digitization
With the c.Hub, the new data platform of the Reifenhäuser Group, Reicofil offers its customers a digitization solution that is tailored to the requirements of nonwovens production.

More information:
Reifenhäuser IDEA nonwovens digital
Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

Photo: ANDRITZ
25.02.2022

ANDRITZ at IDEA 2022

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

International technology group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at IDEA 2022 in Miami, USA, from March 29 to 31. The broad ANDRITZ product portfolio covers nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

A special highlight for IDEA is the virtual booth called the “ANDRITZ Teleport”. For customers who cannot travel to Miami due to the travel restrictions, ANDRITZ offers the opportunity to enter this booth and discover technologies, obtain the latest marketing material and press information, and meet the ANDRITZ team.

See attached document for more information on product portfolio.

More information:
Andritz IDEA nonwovens spunlace
Source:

ANDRITZ AG

Photo: ANDRITZ
22.02.2022

ANDRITZ at Inlegmash 2022 in Russia

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

ANDRITZ will be presenting its innovative solutions for nonwovens production and textile manufacturing at INLEGMASH 2022 in Moscow, Russia, from March 14 to 17.

AIRLAY TECHNOLOGY
Protecting the environment and conserving natural resources require new technologies. In the textile-related industries, the current challenge is to develop industrially and economically viable solutions to use eco-friendly fibers in nonwovens. ANDRITZ focuses on the airlay nonwoven application for hemp fibers (used in mattress production, insulation, ...) and also geotextile end uses.

TEXTILE RECYCLING TECHNOLOGIES
ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending, and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses. ANDRITZ will present recycling technologies for end-of-life textile products that can be used in multiple applications, such as automotive, insulation, mattresses, and furniture felts.

Customer awareness and regulations are pushing apparel brands to recycle their textile waste and use the recycled textile fibers in their own products. To support ANDRITZ customers, a team with process know-how is available to conduct customized trials in our advanced technical center located at the ANDRITZ Laroche facilities in Cours, France.

BAST FIBERS
For the demanding Russian market for technologies based on bast fibers, ANDRITZ will present innovative products and the valorization of bast fibers, in particular hemp.
ANDRITZ Laroche is a player in the textile waste recycling sector, with airlay nonwoven technologies but also bast fiber decortication and cottonizing lines.

These eco-friendly fibers are used to spin yarn mixed with cotton, saving cotton as raw material, which reduces the consumption of water, pesticides applied in its cultivation and chemicals used during the dyeing and finishing processes.

More information:
Andritz Inlegmash nonwovens Recycling
Source:

ANDRITZ AG

Trützschler Nonwovens auf der IDEA (c) Trützschler Nonwovens & Man-Made Fibers GmbH
A Carded/Pulp (CP) line for biodegradable composite nonwovens from pulp and viscose fibers
21.02.2022

Trützschler Nonwovens at IDEA

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

IDEA, the North American nonwovens show, will take place in Miami from March 28th to 31st. Trützschler’s booth focuses on the needs of the American market. It's about local service, the efficient production of sustainable nonwovens and the digital support of production processes.

Tomorrow’s products are sustainable
In addition to the in-depth know-how, Trützschler Nonwovens has a broad portfolio of line concepts for the production of sustainable, biodegradable nonwovens. Cotton is an important raw material for American producers, which is why Trützschler is showing solutions for processing raw cotton, comber noils and blends of viscose and cotton. Another focus is on the Voith/Trützschler concepts for wet-laid, hydroentangled WLS and CP nonwovens. Nonwovens made from viscose fibers and NBSK pulp, the raw material for the paper industry, not only offer a good cost/performance ratio, but also a small CO2 footprint.

Digital solutions optimize the production floor
In order to ensure lasting quality, Trützschler Nonwovens presents a modular, digital work environment that systematizes, digitizes and simplifies typical work processes. With the help of Industry 4.0 technologies, line, process and quality data relevant to a production lot can be stored, aggregated, visualized and analyzed with regard to process improvements.

Trützschler USA
With its headquarters in Charlotte, North Carolina, and more than 100 employees, Trützschler USA is the first point of contact for all matters relating to American nonwovens producers. The company is able to equip and convert machines according to customer specifications (certified UL508A panel shop), carry out factory acceptance tests and a wide range of repairs in Charlotte.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

Photo: ANDRITZ
13.01.2022

ANDRITZ to supply a spunlace line to Biosphere, Ukraine

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

International technology group ANDRITZ has received an order from the leading Ukrainian manufacturer of household and hygiene products, Biosphere Corporation, to deliver its first complete neXline spunlace line. The ANDRITZ spunlace line will enable Biosphere to produce fabrics from 30 to 70 gsm, with an hourly output of up to 3,000 kg/hr after the second commissioning phase. Start-up is scheduled in two stages – the first one in the first quarter of 2022 and the second in early 2023, reaching full production capacity.

The high-capacity spunlace line will double the company’s current production capacity and is designed to process various types of fibers, such as polyester/viscose blends and natural fibers. It is dedicated to the production of household, medical and hygiene fabrics, such as cosmetic, disinfecting and baby wipes.

Andriy Zdesenko, founder and CEO of Biosphere Corporation, says: “Our goal is to carry on creating innovative and premium-quality products. When ANDRITZ came up with a tailor-made offer combining its cutting-edge spunlace technology with full flexibility for our future installation, we knew they were the ideal partner to support us in our business development.”

In 2019, ANDRITZ Diatec delivered a baby diaper converting line to Biosphere. With this additional order, ANDRITZ is demonstrating its strong global position as a supplier of state-of-the-art and tailor-made sustainable nonwoven solutions.

Founded in 1997, Biosphere Corporation has become the market leader in the production and distribution of household and hygiene products in the Ukraine and the CIS and a key converter player in Eastern Europe and Central Asia. The company is expanding rapidly on the international market, including Africa.

Source:

ANDRITZ AG

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

(c) ANDRITZ AG
ANDRITZ neXline Spunlace eXcelle Line
09.11.2021

ANDRITZ to supply a high-speed spunlace line to Welspun, India

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

International technology group ANDRITZ has received an order from Welspun Advanced Materials, India, to deliver a complete neXline spunlace line for the production of nonwoven roll goods and wipes for their new plant in Hyderabad, Telangana. The line has a capacity of up to three tons per hour. Start-up of the line is scheduled for the fourth quarter of 2021.

The ANDRITZ high-capacity spunlace line will process various types of synthetic or natural fibers, such as polyester, viscose and cotton. The final products will have fabric weights ranging from 25 to 120 gsm, thus covering many applications. This neXline spunlace line also offers the option to integrate a third component from a selection of smart layers, enabling Welspun to also manufacture products for the health care and hygiene sectors.

Welspun is the largest global exporter of home textiles. Innovation and quality lie at the heart of the company’s success, which already has nonwoven production lines in operation, including needlepunch and spunlace equipment. With its new plant in Telangana, Welspun will significantly increase its existing spunlace capacity and also maintain a broad range of applications as the final products are used in hygiene, home care and industrial cleaning. The new, advanced facility is a 100,000 sqm greenfield development that is part of a larger 1,500,000 sqm industrial complex also accommodating the Welspun floorings facility.

Source:

ANDRITZ AG

05.11.2021

GKD-Lösungen für die Vliesstoffindustrie auf der INDEX

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Gute Stimmung, hohe Besucherfrequenz und spürbares Investitionsinteresse kennzeichneten nach 18-monatiger Pause die INDEX in Genf. Über 500 Aussteller aus 44 Ländern zog die größte globale Vliesstoffmesse in ihren Bann. An allen vier Messetagen war auch der Stand der GKD Gruppe (GKD) gut besucht. Dabei galt das Interesse der Fachbesucher vor allem den neuen Prozessbandgeweben und weiterentwickelten Produkten für Vliesformierung und Thermobonding.

Besondere Topografie und kurze Lieferzeiten
Überaus positiv war die Resonanz auf das neue GKD-Prozessbandgewebe CONDUCTIVE 2215 – eine Kreuzköperbindung aus speziellen Polyester-Filamenten für die Airlay- und Meltblown Vliesformierung. Für die sichere Ableitung der in Formierprozessen unvermeidlichen elektrostatischen Aufladung sorgen karbonbeschichtete Filamente. Das innovative Zusammenspiel von Materialwahl, Filamentdurchmesser, Bindungstechnologie und Luftdurchlässigkeit verleiht dem neuen Formiergewebe von GKD eine besondere Topografie. Sie gewährleistet eine präzise, homogene Vliesablage bei zugleich guter Absaugung und minimiertem Risiko von Faserverhakungen oder -verlust. Das qualifiziert diesen neuen Gewebetyp insbesondere für die Verarbeitung kurzfaseriger, gebleichter Baumwolle in der Airlay-Formierung. Aus Anwendersicht sprechen für dieses Produkt überdies die guten Lieferzeiten dank durchgängiger Produktion bei GKD in Deutschland. Dadurch entfallen die sonst üblichen Unwägbarkeiten und langen Lieferzeiten anderer Anbieter mit Lieferketten in Fernost oder Übersee und anschließender Konfektionierung in Europa.

Antihaftbeschichtete Glashybrid-Leichtgewichte
Ein zweiter Magnet am GKD-Messestand waren die antihaftbeschichteten Glashybrid-Gewebebänder für Thermobonding-Prozesse. Die Glashybrid-Gewebebänder von GKD sind bereits seit Jahren zur thermischen Verfestigung von hoch voluminösen oder stark verdichteten Produkten in Doppelbandöfen erfolgreich etabliert. Durch ihre einlagige Gewebekonstruktion aus Edelstahldrähten in Schussrichtung und Kettseilen aus Glasfaserlitzen sind sie energieeffiziente Leichtgewichte und damit besonders wirtschaftlich in der Anwendung. Unterstrichen wird diese Wirtschaftlichkeit durch eine deutlich höhere Fertigungsgeschwindigkeit, mehrjährige Laufzeiten sowie minimierte Reinigungsintervalle. Die vollständige PFA-Beschichtung von Drähten, Litzen und Kreuzungspunkten qualifiziert den Bandtyp insbesondere für stark klebende Produkte oder solche mit großen Schrumpfkräften. Mit der nochmals verstärkten Gewebeauslegung – wahlweise magnetisch oder nichtmagnetisch – wurden die ohnehin schon guten Eigenschaften wie Querstabilität, Spurtreue und Standzeit noch weiter verbessert.

Produkte für Trocknung und Filtration
Im Rahmen der INDEX gefragte Problemlöser waren auch die nahtlosen Spiralbänder aus GKD-Fertigung. In der Vliesproduktion gewährleisten die in Luftdurchlässigkeit, Spurtreue und Formstabilität kunden- und anwendungsspezifisch ausgelegten Bänder in PPS-Ausführung produktschonende Trocknungsprozesse bei bis zu 180 Grad Celsius. Abgerundet wurde das Ausstellungsprogramm von GKD in Genf durch Filtermedien für Zentralfilter, Spinnbalken und Anblassiebe aus Metallgewebe für die Polymerfiltration.

Source:

GKD / impetus.PR

Reifenhäuser Enka Tecnica mit High-End-Komponenten auf der INDEX (c) Reifenhäuser
19.10.2021

Reifenhäuser Enka Tecnica exhibits high-end components at INDEX

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

With its refresh service for refurbishing used components, Enka Tecnica not only offers a cost-efficient alternative to new parts, but also extremely fast delivery times, a factor that is often decisive to maintain daily production targets. Visitors to Geneva will be able to see the quality of refresh components displayed at the booth - a meltblown and a spunbond spinneret, half of which has been refurbished. They will be able to see the condition of the capillary holes before and after the refresh through a microscope.

Another trade show highlight includes jet strips for hydroentangling nonwovens. Depending on the application, they are offered in Smart, Advanced, and Premium versions and have a special unique selling point – the strips are fully hardened, whereas competitor products usually only have a hardened surface. This quality advantage results in significantly longer service lives, which is why they are also known on the market as "The World's Hardest Strips”.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

04.10.2021

MS Plastic Welders: Name Change to MS Ultrasonic Technology

MS Plastic Welders, LLC, a leader in ultrasonic technology, announced today that it has changed its name to MS Ultrasonic Technology, LLC. This aligns the name with the sister companies worldwide as well as with the brand name MS Ultrasonic Technology Group.  

The name change reflects the growth of the company as well as its vision for the future.

COO, Peter Wall said “The new name really speaks to who we are as a company. Considering our current relocation to Howell, MI, it was the perfect opportunity to implement the name change at the same time.”

“We’re very excited about the name change as it fits perfectly with our slogan- We Are Ultrasonics.,” said MS Ultrasonic Technology, LLC CFO, Rouven Muell. “It makes it easier for customers, partners, and candidates to consistently recognize our company within the MS Ultrasonic Technology Group and clearly addresses our focus in Ultrasonics.”

MS Plastic Welders, LLC, a leader in ultrasonic technology, announced today that it has changed its name to MS Ultrasonic Technology, LLC. This aligns the name with the sister companies worldwide as well as with the brand name MS Ultrasonic Technology Group.  

The name change reflects the growth of the company as well as its vision for the future.

COO, Peter Wall said “The new name really speaks to who we are as a company. Considering our current relocation to Howell, MI, it was the perfect opportunity to implement the name change at the same time.”

“We’re very excited about the name change as it fits perfectly with our slogan- We Are Ultrasonics.,” said MS Ultrasonic Technology, LLC CFO, Rouven Muell. “It makes it easier for customers, partners, and candidates to consistently recognize our company within the MS Ultrasonic Technology Group and clearly addresses our focus in Ultrasonics.”

Source:

MS Ultraschall Technologie GmbH

04.10.2021

Die Vliesstoffindustrie auf der INDEX™ 20

Nur noch einen Monat, bevor die INDEX™20 zum ersten Mal seit 2017 ihre Tore öffnet, und rund 750 Aussteller haben ihre Teilnahme bereits bestätigt. Dies übersteigt die Zahlen von 2017 und zeigt deutlich die Relevanz der INDEX™20 als Anlaufstelle für Informationen aus erster Hand über neue Entwicklungen in den Bereichen Filtration, Transport, Bau, Hygiene, Medizin und Verpackung.  Wie immer wird es eine große Bandbreite an Endanwendungen geben, darunter langlebige Anwendungen und Einweganwendungen.

Trotz der Herausforderungen, mit denen viele Sektoren konfrontiert sind, haben sich die Vliesstoffe weiterentwickelt und sind während der Coronavirus-Pandemie noch stärker in den Vordergrund getreten. In einer solchen Zeit ist eine Veranstaltung wie INDEX™ wichtiger denn je, nicht nur um weiteres Wachstum zu gewährleisten, sondern auch um den Beitrag von Vliesstoffen im Kampf gegen die Pandemie zu unterstreichen und zu feiern. Um sicherzustellen, dass jeder die Veranstaltung unbesorgt genießen kann, werden alle erforderlichen Gesundheitsprotokolle zum Schutz der Aussteller und Besucher vorhanden sein.  

Nur noch einen Monat, bevor die INDEX™20 zum ersten Mal seit 2017 ihre Tore öffnet, und rund 750 Aussteller haben ihre Teilnahme bereits bestätigt. Dies übersteigt die Zahlen von 2017 und zeigt deutlich die Relevanz der INDEX™20 als Anlaufstelle für Informationen aus erster Hand über neue Entwicklungen in den Bereichen Filtration, Transport, Bau, Hygiene, Medizin und Verpackung.  Wie immer wird es eine große Bandbreite an Endanwendungen geben, darunter langlebige Anwendungen und Einweganwendungen.

Trotz der Herausforderungen, mit denen viele Sektoren konfrontiert sind, haben sich die Vliesstoffe weiterentwickelt und sind während der Coronavirus-Pandemie noch stärker in den Vordergrund getreten. In einer solchen Zeit ist eine Veranstaltung wie INDEX™ wichtiger denn je, nicht nur um weiteres Wachstum zu gewährleisten, sondern auch um den Beitrag von Vliesstoffen im Kampf gegen die Pandemie zu unterstreichen und zu feiern. Um sicherzustellen, dass jeder die Veranstaltung unbesorgt genießen kann, werden alle erforderlichen Gesundheitsprotokolle zum Schutz der Aussteller und Besucher vorhanden sein.  

Natürlich ist die Pandemie nicht die einzige Herausforderung, mit der die Welt heute konfrontiert ist, und viele der Möglichkeiten zur Lösung einiger der wichtigsten Probleme wie Luftqualität, Kosteneffizienz, Nachhaltigkeit und Bereitstellung von sauberem Trinkwasser werden ebenfalls angeboten. In der Tat erleben wir weltweit einen Anstieg der Investitionen in erneuerbare, recycelte Materialien und die Entwicklung von Recyclingtechniken für Vliesstoffprodukte in einer Reihe von Anwendungen, während gleichzeitig eine Reduzierung des Materialeinsatzes, der Energie und der Abfallproduktion gewährleistet wird.

Eine Neuheit in diesem Jahr ist das INDEX™ Innovation Lab, das zum ersten Mal geöffnet sein wird. Das Innovation Lab ist ein spezieller Bereich innerhalb der INDEX™20, in dem Innovation und F&E präsentiert werden. Es ermöglicht die Entdeckung der wichtigsten Eigenschaften und Funktionen von Vliesstoffen in verschiedenen Anwendungen und verbessert das Verständnis für ihr Potenzial. Es werden sogar Poster von einigen der klügsten Köpfe der Branche ausgestellt, die aktuelle, noch laufende Forschungsprojekte sowie die Gewinner und Nominierten der INDEX™20 Innovation Awards vorstellen. Das Innovationslabor wird auch einen "Rundgang" durch das tägliche Leben mit Vliesstoffen bieten, der die breite Palette von Anwendungen und die wachsende Zahl von Sektoren, die von Vliesstoffen berührt werden, präsentiert.

Die sechs kostenlosen Branchenseminare finden parallel zu The Lab statt und bieten Expertenwissen zu den Themen Transport, Filtration, Infektionsprävention, intelligente Vliesstoffe und Geokunststoffe. Jedes Seminar findet live in Genf und parallel dazu auf der virtuellen Plattform statt, wo alle Teilnehmer mit den Referenten interagieren und an Diskussionen und Fragerunden teilnehmen können.

Source:

TEMA Technologie Marketing AG