From the Sector

Reset
143 results
18.03.2024

Autoneum: Increase in revenue and profit in 2023

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Outlook
According to forecasts, worldwide automobile production will be somewhat restrained in 2024 and may even decline slightly compared with 2023. Based on these market forecasts1, Autoneum expects revenue in 2024 of CHF 2.3 billion to 2.5 billion. The Company anticipates an EBIT margin of 4.5–5.5% and free cash flow in the high upper double-digit million range for 2024.

1 Source: S&P Global Light Vehicle Production Forecast of February 16, 2024.

More information:
Autoneum financial year 2023
Source:

Autoneum Management AG

ACIMIT: Italian textile machinery orders remain stationary (c) ACIMIT
19.02.2024

ACIMIT: Italian textile machinery orders remain stationary

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).
 
ACIMIT president Marco Salvadè commented: "The orders index for October – December 2023, as elaborated by our Economics Department, confirms an intake of orders that is still weak, with a negative trend in demand for machinery that is ongoing for the domestic market."

Nonetheless, the orders index abroad shows a slight increase. We estimate that the global geopolitical context is still a source of concern,” continued Salvadè, specifying that, “For the first nine months of 2023, Italian exports on major global markets (i.e. China, Turkey, India and the United States of America), confirm a widespread decline. However, some positive signs emerged in the fourth quarter of last year, as reflected by the latest orders index. For 2024 we expect a consolidation of this trend reversal."

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

06.02.2024

Hohenstein future part of the AI hotspot IPAI

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The Innovation Park for Artificial Intelligence (IPAI) in Heilbronn (www.ip.ai) sees itself as an innovation platform for applied AI and a German lighthouse project with international appeal. The center is intended to map the entire AI value chain, from the qualification of specialists to the application of ethically responsible AI. The aim is to use the AI ecosystem to bring together companies, start-ups, research institutions, scientists, and public institutions and to secure Germany's digital independence and competitiveness in a key future technology.

Source:

Hohenstein Laboratories GmbH & Co. KG

24.01.2024

Rieter: First information on the financial year 2023

  • Sales of CHF 1 418.6 million in the financial year 2023
  • Order intake of CHF 541.8 million in the financial year 2023; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of around 7% expected for the full year 2023 at the upper end of the guidance
  • Market remains challenging

The Rieter Group closed the financial year 2023 with slightly lower sales than in the previous year. According to the first, unaudited figures, total sales of CHF 1 418.6 million were achieved, which is around 6% down on the previous year (2022: CHF 1 510.9 million). In line with expectations, the order intake of CHF 541.8 million was considerably below the previous year (2022: CHF 1 157.3 million). Rieter expects a positive EBIT margin of around 7% for the full year 2023 (2022: 2.1%).

  • Sales of CHF 1 418.6 million in the financial year 2023
  • Order intake of CHF 541.8 million in the financial year 2023; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of around 7% expected for the full year 2023 at the upper end of the guidance
  • Market remains challenging

The Rieter Group closed the financial year 2023 with slightly lower sales than in the previous year. According to the first, unaudited figures, total sales of CHF 1 418.6 million were achieved, which is around 6% down on the previous year (2022: CHF 1 510.9 million). In line with expectations, the order intake of CHF 541.8 million was considerably below the previous year (2022: CHF 1 157.3 million). Rieter expects a positive EBIT margin of around 7% for the full year 2023 (2022: 2.1%).

Outlook
Rieter is operating in a challenging market environment due to the economic and geopolitical conditions as well as the continuing weak demand. There are initial signs of a market recovery visible for the financial year 2024. Rieter will present an outlook for the financial year 2024 at the annual results press conference on March 13, 2024.

Source:

Rieter Holding AG

Disney unveils virtual ‘HoloTile’ floor technology (c) Disney, The Walt Disney Company
Lanny Smoot, Disney Imagineer and Creator of HoloTile floor
22.01.2024

Disney unveils virtual ‘HoloTile’ floor technology

Disney unveiled the HoloTile floor, created by Disney Research Fellow and longtime member of Walt Disney Imagineering Research & Development Lanny Smoot.

The HoloTile floor is a multi-person, omni-directional, modular, expandable, treadmill floor. It allows any number of people to have a shared virtual reality (VR) experience, walk an unlimited distance in any direction, and never collide or walk off its surface.

The HoloTile floor can also be an insert in a theatrical stage, allowing performers to move and dance in new ways, or stage props and structures to move around or appear to set themselves up.

The new technology was revealed (see here), as Lanny Smoot is being inducted into the National Inventors Hall of Fame. He is the first Disney Imagineer to receive this recognition.

Disney unveiled the HoloTile floor, created by Disney Research Fellow and longtime member of Walt Disney Imagineering Research & Development Lanny Smoot.

The HoloTile floor is a multi-person, omni-directional, modular, expandable, treadmill floor. It allows any number of people to have a shared virtual reality (VR) experience, walk an unlimited distance in any direction, and never collide or walk off its surface.

The HoloTile floor can also be an insert in a theatrical stage, allowing performers to move and dance in new ways, or stage props and structures to move around or appear to set themselves up.

The new technology was revealed (see here), as Lanny Smoot is being inducted into the National Inventors Hall of Fame. He is the first Disney Imagineer to receive this recognition.

Smoot is also credited with giving Madame Leota her ability to “float” in the Séance Room at the Haunted Mansion at Disneyland Park; crafting the state-of-the-art extendable lightsaber used by Disney Live Entertainment; inventing the Magic Playfloor interactive game experience on the Disney Cruise Line; producing the immersive Fortress Explorations adventure at Tokyo DisneySea; and designing the virtual and interactive koi ponds at the Crystal Lotus Restaurant at Hong Kong Disneyland Hotel.

More information:
Disney floor space Virtual Reality
Source:

Disney, The Walt Disney Company

Fashion for Good released "Sorting for Circularity India toolkit" (c) Fashion for Good
18.12.2023

Fashion for Good released "Sorting for Circularity India toolkit"

Leveraging insights from Wealth in Waste, Fashion for Good released a toolkit designed to revalorise textile waste in India.

"The Sorting for Circularity India toolkit is a milestone in our journey towards a waste-free world. We have mapped the textile waste landscape, unpacking the huge potential, as well as the roadblocks and commercial opportunities in India’s textile waste industry. We are excited to move beyond rhetoric with this powerful coalition of partners and translate our findings into a roadmap for concrete actions", said Katrin Ley, Managing Director, Fashion for Good.

In 2021, Fashion for Good launched the Sorting for Circularity India Project to organise the Indian textile waste market in a three-phase approach so as to streamline, strengthen and foster the Indian textile waste market to drive the transition to a more circular economy that recaptures value to its maximum potential.

Leveraging insights from Wealth in Waste, Fashion for Good released a toolkit designed to revalorise textile waste in India.

"The Sorting for Circularity India toolkit is a milestone in our journey towards a waste-free world. We have mapped the textile waste landscape, unpacking the huge potential, as well as the roadblocks and commercial opportunities in India’s textile waste industry. We are excited to move beyond rhetoric with this powerful coalition of partners and translate our findings into a roadmap for concrete actions", said Katrin Ley, Managing Director, Fashion for Good.

In 2021, Fashion for Good launched the Sorting for Circularity India Project to organise the Indian textile waste market in a three-phase approach so as to streamline, strengthen and foster the Indian textile waste market to drive the transition to a more circular economy that recaptures value to its maximum potential.

The project brought together various industry players including Fashion for Good partners adidas, Levi Strauss & Co., PVH Corp., Target, Arvind Limited, Birla Cellulose, and Welspun India, as well as Fashion for Good innovators Reverse Resources, PICVISA, and Matoha; H&M, Primark, and TESCO also joined as external partners. The project is supported through catalytic funding provided by Laudes Foundation and IDH, and knowledge support from Canopy and Circle Economy Foundation.

Drawing upon the invaluable insights gained throughout the project, Fashion for Good unveils a toolkit designed to harness the untapped potential of textile waste in India. Together, these resources provide valuable insights, assessments, and practical guidance to advance recycling in India's textile industry.

Source:

Fashion for Good

15.11.2023

Indorama Ventures: 3Q23 Performance report

  • Revenue of US$3.9B, a decline of 1% QoQ and 20% YoY
  • EBITDA of US$324M, an increase of 1% QoQ and a decrease of 37% YoY
  • Operating cash flows of US$410M
  • Net Operating Debt to Equity of 0.97x
  • EPS of THB 0.00

Indorama Ventures Public Company Limited (IVL) reported stable third-quarter earnings as the company’s management focuses on conserving cash and improving competitiveness to bolster performance in a continued period of weakness in the global chemical industry.

Indorama Ventures achieved EBITDA of $324 million in 3Q23, an increase of 1% QoQ and a decline of 37% YoY, impacted by a weak economic environment, geopolitical tensions, and continued post-pandemic disruptions in global markets. Sales volumes dropped 5% from a year ago to 3.6 million tons as China recovers from the pandemic more slowly than expected and an extended period of destocking in the manufacturing and chemical sectors continues to normalize from unprecedented levels last year.

  • Revenue of US$3.9B, a decline of 1% QoQ and 20% YoY
  • EBITDA of US$324M, an increase of 1% QoQ and a decrease of 37% YoY
  • Operating cash flows of US$410M
  • Net Operating Debt to Equity of 0.97x
  • EPS of THB 0.00

Indorama Ventures Public Company Limited (IVL) reported stable third-quarter earnings as the company’s management focuses on conserving cash and improving competitiveness to bolster performance in a continued period of weakness in the global chemical industry.

Indorama Ventures achieved EBITDA of $324 million in 3Q23, an increase of 1% QoQ and a decline of 37% YoY, impacted by a weak economic environment, geopolitical tensions, and continued post-pandemic disruptions in global markets. Sales volumes dropped 5% from a year ago to 3.6 million tons as China recovers from the pandemic more slowly than expected and an extended period of destocking in the manufacturing and chemical sectors continues to normalize from unprecedented levels last year.

Management continues to focus on conserving cash, realizing efficiency improvements, and optimizing the company’s operational footprint to boost profitability. These efforts resulted in positive operating cash flow of US$410 million in the quarter, positive free cash flow of $79 million year to date, and room for further reductions in working capital going forward. The company’s AA- rating was maintained by TRIS in the quarter, with a stable outlook. 

The company expects the operating environment to improve in 2024 as customer destocking continues to ease across all three of Indorama Ventures’ segments. The ramp up of PET and fibers expansion projects operations in India and the U.S. will also contribute to increased volumes.  

Combined PET posted EBITDA of $146 million, a 25% decline QoQ, amid historically low benchmark PET margins, increased feedstock prices in Western markets, and lingering effects of destocking. Integrated Oxides and Derivatives (IOD) segment posted a 27% rise in EBITDA to $119 million QoQ, supported by strong MTBE margins in the Integrated Intermediates business. The Integrated Downstream portfolio’s profitability was impacted by destocking, inflationary pressures, and margin pressure from imports. Fibers segment achieved a 140% increase in EBITDA to $48 million QoQ as Lifestyle volumes grew in key markets in Asia, and the Mobility and Hygiene verticals benefited from management’s focus on optimizing operations and refocusing the organization. 
 

Source:

Indorama Ventures Public Company Limited

10.11.2023

PIP Global Safety selected TrusTrace platform for traceability needs

TrusTrace, a SaaS (Software as a Service) company with a platform for supply chain traceability and compliance data management, announced that PIP Global Safety, a supplier of protective workwear equipment with over 30 brands globally, has selected the TrusTrace platform to support its traceability needs, including evidence collection to prove compliance for the UFLPA (Uyghur Forced Labor Prevention Act).

PIP Global Safety will now leverage verified, real-time data on the TrusTrace platform to provide deeper visibility into the cotton used within the Company’s PPE and workwear products. The partnership will also improve the efficiency of chain of custody data collection for UFLPA compliance – a U.S. regulation that is compelling companies to assess risks in their supply chain and implement processes to ensure that suppliers are not using forced labor.

TrusTrace, a SaaS (Software as a Service) company with a platform for supply chain traceability and compliance data management, announced that PIP Global Safety, a supplier of protective workwear equipment with over 30 brands globally, has selected the TrusTrace platform to support its traceability needs, including evidence collection to prove compliance for the UFLPA (Uyghur Forced Labor Prevention Act).

PIP Global Safety will now leverage verified, real-time data on the TrusTrace platform to provide deeper visibility into the cotton used within the Company’s PPE and workwear products. The partnership will also improve the efficiency of chain of custody data collection for UFLPA compliance – a U.S. regulation that is compelling companies to assess risks in their supply chain and implement processes to ensure that suppliers are not using forced labor.

PIP Global Safety previously managed their supply chain traceability manually; now, TrusTrace will automate the process, changing how data is collected, digitized and shared. “After an extensive vetting process, we selected TrusTrace as our traceability platform because of their ability to provide us with detailed, product-level data that enables us to thoroughly and accurately map our supply chains,” said Nathan McCormick, Senior VP of Operations & Integrated Supply Chain at PIP Global Safety. “While a lot of laws and regulations around due diligence have not yet come into force, we are taking a proactive approach to ensure that we’re ahead of the curve to support our customers’ needs while proactively monitoring for risk of forced labor in our supply chain.”

In addition to supporting regulatory compliance, TrusTrace supports PIP Global Safety’s long-standing sustainability and social responsibility initiatives. PIP Global Safety has pledged to continually identify opportunities to minimize their environmental footprint while still maximizing protection against occupational hazards. This commitment extends to multiple aspects of the business, including Manufacturing Processes, Sustainability-Driven Programs, Recycled Products, Social Sustainability and Future Initiatives.

03.11.2023

Solvay announces Board of Directors for standalone SYENSQO

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

Solvay announced the future Board of Directors of SYENSQO, effective upon completion of the planned separation of Solvay into two companies – SOLVAY and SYENSQO – which is on track to be completed in December 2023.

SYENSQO’s Board will be composed of 10 members, including 6 independent members, 3 members representing the reference shareholder, Solvac, and the company CEO. They have deep expertise in specialty industries, international business operations, risk management, corporate governance, finance and clean technology.

The following individuals will serve on the SYENSQO Board of Directors:
Rosemary Thorne will serve as independent Director and Chair of the SYENSQO Board, as well as Chair of the Board’s Finance Committee. She is currently an Independent Director on the Solvay Board of Directors, appointed in 2014, and Chair of the Board’s Audit Committee. She is also an Independent Director on the Board of Merrill Lynch International (UK), a wholly-owned subsidiary of Bank of America, serving as Chair of the Audit Committee. Ms. Thorne has decades of financial leadership experience across a wide range of industries. She previously served as Chief Financial Officer at J. Sainsbury, the UK’s largest supermarket chain at the time; Bradford & Bingley; and Ladbrokes. Ms. Thorne previously sat as an Independent Director on the Boards of Royal Mail Group, Cadbury Schweppes, Santander UK, First Global Trust Bank and Smurfit Kappa Group.

Dr. Ilham Kadri will serve as Chief Executive Officer and member of the Board of Directors of SYENSQO. She is currently CEO and President of the Executive Committee at Solvay. Ms. Kadri has successfully led the turnaround of Solvay, delivering double-digit EBITDA growth and 18 consecutive quarters of positive free cash flow, deleveraging the balance sheet and promoting superior people engagement. She is an independent Board member at A.O. Smith and L’Oréal. She is active in non-profit organizations, as Chair of the World Business Council for Sustainable Development (WBCSD), member of the steering committee of the European Round Table of Industrialists (ERT) as well as a permanent member of the World Economic Forum’s International Business Council (WEF). Ms. Kadri has extensive leadership experience across a variety of industries in four continents and with leading industrial multinationals, including Shell, UCB, Huntsman, Dow, Sealed Air. Prior to Solvay, she was CEO and President of Diversey in the USA, led the company’s return to profitability and resulting spin off and divestiture to Bain Capital. She founded two non-Profit foundations: the Solvay Solidarity Fund in Belgium in 2020 which supported more than 7000 families affected by Covid-19 and natural disasters; and founded the ISSA Hygieia Network in 2015 in the USA, to help women in the cleaning industry. She received two Doctor Honoris Clausa from EWHA University in Korea and Université de Namur in Belgium.

Julian Waldron will serve as independent Director and Chair of the Audit Committee. He currently serves as Deputy Executive Chairman of privately-held Albea Group, a global beauty and personal care packaging company which operates 35 facilities in Europe, Asia and the Americas. Mr. Waldron has held senior leadership roles at several leading listed companies in the industrial, technology and services sectors and brings a wealth of expertise in finance and business operations. Prior to joining Albea in 2022, he was Chief Financial Officer of Suez for three years after serving as Chief Financial Officer and subsequently Chief Operating Officer of Technip. He started his career at UBS Warburg where he spent 14 years. Mr. Waldron also served as an independent Board member and Chairman of finance, risk and investments at Carbon Clean, a privately-owned carbon capture company dedicated to achieving net zero.

Heike Van de Kerkhof will serve as independent Director and Chair of the Nomination Committee. She currently sits on the Board of OCI N.V.. Ms. Van de Kerkhof brings more than 30 years of experience in the chemicals, oil & gas and materials industries, having served in numerous leadership roles around the globe. From 2020 to 2023, she was Chief Executive Officer of Archroma Management, a global specialty chemicals company. During her tenure, she successfully completed the transformational acquisition of Huntsman’s Textile Effects business. Prior to her role at Archroma, Ms. Van de Kerkhof served as Vice President of Lubricants, Western Hemisphere at BP, and held positions at Castrol, The Chemours Company, and Neste Corporation. She also held many leading roles within DuPont over 18 years.

Matti Lievonen will serve as independent Director and Chair of the Compensation Committee. He is currently an independent director on the Solvay Board, appointed in 2017. Mr. Lievonen is a proven executive in the energy, forestry, power and automation industries with an extensive track record of leading businesses through climate transition. For over ten years until 2018, he served as Chairman and Chief Executive Officer of Neste Corporation, a global leader in next-generation renewable fuels and chemicals. During his time at Neste, Mr. Lievonen successfully promoted the development of clean fuels as well as Finland’s bioeconomy strategy in advancing renewable transportation fuels. He has also been involved with organizations such as Fortum Board, SSAB, Nynäs AB, Ilmarinen, and the HE Finnish Fair Foundation. Until 2021, Mr. Lievonen was also Chairman of the Board of Directors at Fortum. He has been recognized for his admirable leadership and expertise, and in 2016 was awarded an Honorary Doctorate of Technology by the Aalto University Schools of Technology.

Dr. Françoise de Viron will serve as non-independent Director, Chair of the ESG Committee and Vice-Chair of the Board. She is currently a director of the Solvay Board, appointed in 2013. Ms. de Viron is a regarded academic leader and has extensive experience in innovation, R&D and qualitative research. She is a Professor Emeritus at the Faculty of Psychology and Education Sciences and Louvain School of Management at UCLouvain in Belgium where she has been an Academic Member of various groups at UCLouvain. Ms. de Viron previously served as the president of AISBL EUCEN – the European Universities Continuing Education Network. Prior to her university position, from 1985 to 2000, she was in charge of developing Artificial Intelligence applications at Tractebel S.A. (now Tractebel-Engie).

Roeland Baan will serve as independent Director. He currently serves as President and Chief Executive Officer of Topsoe, a privately-held leading provider of clean energy and petrochemical technologies. He is also Chairman of the Supervisory Board of SBM Offshore NV. Roeland Baan has extensive experience in supply chain management, M&A, business development and operations management. Prior to joining Topsoe in 2020, he was President and CEO of Outokumpu and has held several executive roles at global organizations such as Aleris International, ArcelorMittal and SHV NV. He spent over 16 years in various roles across the globe at Shell, living in South America, in Africa and in the United Kingdom.

Edouard Janssen will serve as non-independent Director. He is currently a Director on the Solvay Board, appointed in 2021. Earlier this year, he was appointed Chief Financial Officer of D’Ieteren Group, a European leader in automotive distribution services. Mr. Janssen is also a Board member of privately-held Financière de Tubize and Union Financière Boël, as well as Co-Founder and Chair of Trusted Family. Mr. Janssen is active in academics, as Vice-Chair of the International Advisory Board of the Solvay Brussels School of Economics and Management and on the advisory board of the INSEAD HGIBS. He brings expertise in finance, strategy, entrepreneurship, business management, planning and marketing. He has served as Solvay’s Vice President in strategy and M&A between 2019 and 2021, and prior to that, he was the US-based General Manager for North- and Latin America at Solvay’s Aroma Performance Global Business Unit.
 
Dr. Mary Meaney will serve as non-independent Director. She is currently a member of the Board of Directors and of the Audit Committee of Groupe Bruxelles Lambert SA. She also sits on the Board of Directors and the Remuneration Committee of Beamery, the privately-held talent management company. She is a member of the Board of Directors and of the Finance Committee of Imperial College, London.Dr. Meaney will bring expertise in Strategy, M&A, and change management, which she acquired over a 24-year career at McKinsey. She was a Senior Partner, served on the McKinsey Shareholders Council and led McKinsey’s global Organization practice.

Nadine Leslie will serve as independent Director and is based in the United States of America. She is currently a member of the Board of Directors of Provident Financial Services , as well as a Non-Executive Director of Seven Seas Water Corporation, a water and wastewater treatment multinational company. She also sits on the Board of Trustees of Hackensack Meridian Health Network and is active as strategic consultant for civil engineering firm T&M Associates. Over a 22-year career at Suez, Ms. Leslie held several leadership positions, the last one being Chief Executive Officer of Suez North America, until 2022. Previously she served as Executive Vice President Health & Safety.

More information:
Solvay Board of Directors
Source:

Solvay

03.11.2023

Lenzing implements performance program in response to lack of market recovery

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

  • Revenue of EUR 1.87 bn and EBITDA of EUR 219.1 mn in the first three quarters of 2023
  • Positive free cash flow of EUR 27.3 mn in the third quarter
  • Implementation of performance program focusing on positive free cash flow, strengthened sales and margin growth and sustainable cost excellence
  • Modernization and conversion of Indonesian site successfully completed – EU Ecolabel received

The anticipated recovery in markets relevant for the Lenzing Group has to date failed to materialize. The continued sharp increase in raw material and energy costs on the one hand and very subdued demand on the other had a negative impact on Lenzing’s business trends as well as on industry as a whole during the reporting period.

Revenue in the first three quarters of 2023 decreased by 5.3 percent year-on-year to EUR 1.87 bn. This reduction was primarily due to lower fiber revenues, while pulp revenues were up. The earnings trend was mainly influenced by the market environment. As a consequence, earnings before interest, tax, depreciation and amortization (EBITDA) in the reporting period decreased by 16.7 percent year-on-year to EUR 219.1 mn. The net result after tax amounted to minus EUR 96.7 mn (compared with EUR 74.9 mn in the first three quarters of 2022), while earnings per share amounted to minus EUR 4.90 (compared with EUR 2.16 in the first three quarters of 2022).

Outlook
According to the IMF, a full return of the global economy to pre-pandemic growth rates appears increasingly out of reach in the coming quarters. In addition to the consequences of the pandemic and the ongoing war in Ukraine, growth is also being influenced by restrictive monetary policy and extreme weather events. The consequences of the renewed military confrontation in the Middle East are not yet foreseeable. Overall, the IMF warns of greater risks to global financial stability, and expects the growth rate to decrease to 3 percent this year and to 2.9 percent next year.

The currency environment is expected to remain volatile in the regions of relevance to Lenzing.

The general market environment is continuing to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing.

In the trend-setting market for cotton, the current 2023/24 crop season is emerging as a further 1.7 mn tonnes of inventory build-up, following 1.8 mn tonnes of inventory build-up in the previous season.

Earnings visibility remains severely limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program and on this basis is implementing a comprehensive performance program focused on positive free cash flow, strengthened sales and margin growth as well as sustainable cost excellence. The overarching goal is to position Lenzing even more strongly and to further increase its crisis resilience.

In structural terms, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the trans-formation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking the aforementioned factors into consideration, the Lenzing Group continues to expect that EBITDA for the 2023 financial year will lie in a range between EUR 270 mn and EUR 330 mn.

Source:

Lenzing AG

Source: 22nd ITMF Global Textile Industry Survey (19.-29.09.2023) ITMF
Source: 22nd ITMF Global Textile Industry Survey (19.-29.09.2023)
13.10.2023

22nd ITMF Global Textile Industry Survey

  • Business situation remains poor and unchanged
  • Manufacturers show prudence in forecasting future developments

 
According to ITMF’s Global Textile Industry Survey (GTIS) conducted in the middle of September 2023, survey participants exhibited a cautious sentiment regarding the current business situation. The indicator for the business situation stood at -27 percentage points (pp, see Graph 1) because companies in the entire textile value chain were struggling with rising costs and weak demand. Business expectations have remained unchanged since July at around +20 pp (see Graph 2). They have jumped into positive territory in January 2023 based on the assumption that the Chinese economy would give an additional boost, but this hope did not materialise. The analysis indicates that a hard landing of the global economy is not in sight.

  • Business situation remains poor and unchanged
  • Manufacturers show prudence in forecasting future developments

 
According to ITMF’s Global Textile Industry Survey (GTIS) conducted in the middle of September 2023, survey participants exhibited a cautious sentiment regarding the current business situation. The indicator for the business situation stood at -27 percentage points (pp, see Graph 1) because companies in the entire textile value chain were struggling with rising costs and weak demand. Business expectations have remained unchanged since July at around +20 pp (see Graph 2). They have jumped into positive territory in January 2023 based on the assumption that the Chinese economy would give an additional boost, but this hope did not materialise. The analysis indicates that a hard landing of the global economy is not in sight.

Order intake recovered in May 2023, but flattened in July and remained very weak in September (-28 pp). The entire textile value chain is running on minimum levels of orders. As long as brands and retailers do not increase orders, the entire value chain will continue struggling. Order backlog slightly increased globally, from 1.9 months in July to 2.2 months in September 2023. This indicator had been on a falling trend since the end of 2021. The average capacity utilisation rate dropped again globally (69%). Textile manufacturers expect this rate to remain low in six months’ time as well.

Weakening demand has been the major concern in the global textile value chain for a year. In September 2023, this concern grew even stronger due to high inflation rates measured in the last few months, a phenomenon fueled by high energy and high raw material prices. Nevertheless, participants seem not to be concerned by order cancelations and inventory levels remain average along the textile value chain. 

More information:
ITMF market survey
Source:

ITMF

Adient presented seating innovations at IAA (c) Adient
11.10.2023

Adient presented seating innovations at IAA

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Responding to the need for overall cost and complexity reduction in manufacturing, the Pure Essential seat is especially lightweight. Environmentally-conscious practices such as material separation and recycling, and design for disassembly are embedded into the manufacturing process from the development stage. The visionary seat consists of two materials only – green steel and recyclable polyester (PET).
 
New customer needs in terms of premium comfort are met with the Autonomous Elegance seat, specifically developed to fit Advanced Driver Assistance Systems (ADAS). State-of-the-art findings on ergonomics and human body kinematics have been incorporated following extensive occupant research. They are complemented by advanced comfort assets such as noise cancellation and advanced climate functions. “Our seat demonstrators provide solutions to our customers’ main concerns, and we are looking forward to continuing the strategic product dialogue with them, based on our new demonstrators” highlights David Herberg, Vice President Engineering Adient EMEA. Most features of the seat can already be offered for sourcing, such as the metal structure and seat kinematics (adjustment functions and mechanisms).

Considering optimized use of space as well as sustainability aspects, the automotive supplier has also given its Smart Efficiency seat an update: the seat features a slimmer appearance than its predecessor without compromising on comfort. This design does not only help save space, but also paves the way for new mobility concepts based on battery packaging in electric vehicles.
 
The showcased products will be available for demonstration in customer roadshows as of December 2023.

Source:

Adient

06.10.2023

Fashion experts at Global Fashion Summit in Boston

Hosted in Boston, Massachusetts on 27 September, Global Fashion Summit convened hundreds of esteemed representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, and marked the first edition of Global Fashion Summit in North America since the forum’s launch in 2009 as a side-event to COP15 in Copenhagen.
 
The Boston edition further explored Global Fashion Agenda’s 2023 editorial theme, ‘Ambition to Action’, while reflecting on and responding to what happened at Global Fashion Summit: Copenhagen Edition in June. By bringing Global Fashion Summit to Boston – a renowned hub for technology, innovation, and education - the Summit presented a deeper exploration of the global challenges, differences, and opportunities towards a more sustainable value chain. The Innovation Forum is a key pillar of GFA’s work, making Boston an apt location to showcase pioneering industry solution providers.
 

Hosted in Boston, Massachusetts on 27 September, Global Fashion Summit convened hundreds of esteemed representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, and marked the first edition of Global Fashion Summit in North America since the forum’s launch in 2009 as a side-event to COP15 in Copenhagen.
 
The Boston edition further explored Global Fashion Agenda’s 2023 editorial theme, ‘Ambition to Action’, while reflecting on and responding to what happened at Global Fashion Summit: Copenhagen Edition in June. By bringing Global Fashion Summit to Boston – a renowned hub for technology, innovation, and education - the Summit presented a deeper exploration of the global challenges, differences, and opportunities towards a more sustainable value chain. The Innovation Forum is a key pillar of GFA’s work, making Boston an apt location to showcase pioneering industry solution providers.
 
Attendees heard from over 40 speakers from a range of companies and organisations such as Levi Strauss & Co., Tapestry, Neiman Marcus Group, Thunder Voice Hat, H&M Group, Alice and Olivia, BBC StoryWorks, New Standard Institute, Conservation International, Worldly, Trove, Ceres, Aditya Birla Fashion and Retail Ltd, and many more. This Summit also featured esteemed Indigenous speakers on the programme. View all speakers.
 
The Summit’s second international edition facilitated inspiring thought leadership and exchanges around key themes including: Policy, Finance, and Retail, while also complementing the core priorities of the Fashion CEO Agenda: Respectful and Secure Work Environments, Better Wage Systems, Resource Stewardship, Smart Material Choices, and Circular Systems. The programme featured bold panels, case studies, and leadership roundtables reflecting on topics including: ‘Indigenous Leadership Perspectives’, ‘Exploring Fashion’s ESG Concept’, ‘On The Ground: Adaptation or Mitigation?’, ‘The Global Approach to Circularity’, and ‘Innovation for Value Chain Challenges’.

Global Fashion Summit: Boston Edition also presented an Innovation Forum, enabling small and large companies to meet with 14 sustainable solution providers from across the value chain– equipping them with the concrete tools to expedite meaningful actions. GFS Connect facilitated over 90 connections between fashion companies and exhibitors during the Summit.

Source:

Global Fashion Agenda

Stefan Brück new Chairman of A+A Advisory Board (c) Messe Düsseldorf GmbH
Stefan Brück, Chairman of A+A Advisory Board
06.10.2023

Stefan Brück new Chairman of A+A Advisory Board

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

“My short and medium-term aim is to move such themes as sustainability but also new technologies and innovations even more into focus in occupational safety. This also includes digital products and solutions such as AI, Virtual Reality or Augmented Reality applications,” explains Stefan Brück and goes on to say: “I look forward to contributing to develop A+A further as the world-leading trade fair and to increasing the social, economic and ecological relevance of PPE on a global scale all year round.”

Source:

Messe Düsseldorf GmbH

06.10.2023

Release of GOTS Due Diligence Handbook

The Global Organic Textile Standard (GOTS), in cooperation with the Hague-based UpRights Foundation, launches the GOTS Due Diligence Handbook for Certified Entities. This landmark publication is a crucial step forward in the promotion of sustainability, human rights and ethical business conduct in the textile sector.

Clear Guidance for GOTS Certified Entities Based on Recognised International Standards
The GOTS Due Diligence Handbook for Certified Entities is based on the recognised international frameworks, including the OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector (2018) and the UN Guiding Principles on Business and Human Rights (UNGPs). The Handbook offers GOTS Certified Entities clear guidance on integrating due diligence processes into their operations, thereby helping them to comply with domestic due diligence laws such as the German Supply Chain Law, French Vigilance Law, and upcoming EU legislation.

The Global Organic Textile Standard (GOTS), in cooperation with the Hague-based UpRights Foundation, launches the GOTS Due Diligence Handbook for Certified Entities. This landmark publication is a crucial step forward in the promotion of sustainability, human rights and ethical business conduct in the textile sector.

Clear Guidance for GOTS Certified Entities Based on Recognised International Standards
The GOTS Due Diligence Handbook for Certified Entities is based on the recognised international frameworks, including the OECD Due Diligence Guidance for Responsible Supply Chains in the Garment and Footwear Sector (2018) and the UN Guiding Principles on Business and Human Rights (UNGPs). The Handbook offers GOTS Certified Entities clear guidance on integrating due diligence processes into their operations, thereby helping them to comply with domestic due diligence laws such as the German Supply Chain Law, French Vigilance Law, and upcoming EU legislation.

A Comprehensive Blueprint
The GOTS Due Diligence Handbook for Certified Entities was developed as a structured roadmap, leading Certified Entities through the process of establishing and refining their management systems. The emphasis of the Handbook is on a holistic due diligence approach, ensuring that GOTS-certified companies not only identify but also proactively prevent and effectively mitigate potential adverse impacts on human rights and the environment. The Handbook ensures that GOTS Certified Entities are equipped with the knowledge and tools to respond to potential challenges, transforming them into leaders in responsible business conduct within the textile sector. The GOTS 7.0 criteria, bolstered by this Handbook, paves the way for a more sustainable and socially conscious business approach in the textile sector.

OECD Standards Assessment
GOTS is currently undergoing the OECD Alignment Assessment, a three-stage process that will result in a reputable, independent evaluation of the GOTS Criteria's alignment with the OECD's due diligence guidance documents. The process includes a Standards Assessment, an Implementation Assessment and a Credibility Assessment. As GOTS enters the Standard Assessment phase, it effectively showcases its dedication to sustainable practices, in line with the comprehensive international framework for responsible garment and footwear supply chain laid out in the OECD Due Diligence Guidance. This process, supported by the German Federal Ministry for Economic Cooperation and Development, began in July 2023 and is expected to be completed in January 2024.

Source:

GOTS - Global Organic Textile Standard

NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK. Photo NOPINZ
NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK.
28.09.2023

NOPINZ using Mimaki’s textile dye sublimation solutions

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.

Source:

Mimaki EMEA

ISKO supports designers at London Fashion Week (c) ISKO
Designs from left to right by: Priya Ahluwalia, Chet Lo, Aaron Esh and Masha Popova
27.09.2023

ISKO supports designers at London Fashion Week

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

Chet Lo
This season, Chet Lo took an active stand in reclaiming the power lost during his youth, healing the childhood wounds inflicted by a society that sidelined differences instead of celebrating them.
ISKO’s Ctrl+Z fabric and specialist lasering techniques from ISKO’s Creative Room was used across three looks featuring signature Chet Lo erotic laser prints across denim bottoms.

Aaron Esh
The SS24 season marked the brand’s debut at London Fashion Week, a homecoming of sorts for Esh, who was born and raised in the heart of the British capital, studied at Central Saint Martins and became a finalist at the LVMH Prize earlier this year. The early impulses of Aaron Esh remain steadfast: clothes that combine establishment rigour with the rebellious spirit of youth culture, devotedly crafted for a generation who feels somewhere in-between.
Aaron created bootleg denim ripped jeans made entirely from ISKO Denim using R-TWO50 fabric, which comprises a minimum of 50% pre and post-consumer recycled content. The designer noted the addition of denim accompanied by leathers add a new level of depth to their latest collection.

Masha Popova
Masha Popova’s sophomore catwalk outing, MONSTER was a “seasonless” offering that combines Autumn Winter 2023 and Spring Summer 2024.
Masha continued her obsession with denim manipulation, using various finishings including over-dyeing, flocking, patchwork, scratching and fraying in a variety of colours from vibrant green to silver across jeans, tops and jackets, all developed with the help of ISKO’s Creative Room, London.

Source:

ISKO

(c) Lenzing Gruppe
14.09.2023

Lenzing: Echtzeit-Lieferverfolgung und CO2-Visibilität

  • Die Zusammenarbeit mit project44, einem Anbieter von Supply-Chain-Lösungen, zielt darauf ab, die Transparenz und Effizienz zu steigern und gleichzeitig einen vollkommen neuen Überblick über die CO2-Emissionen bis auf Containerebene zu ermöglichen
  • Das neue System zur Echtzeit-Lieferverfolgung von Containern bietet Lösungen zur Bewältigung der Komplexität der Lieferketten in der Faserindustrie, die in den letzten Jahren deutlich zugenommen hat
  • Mit dem auf Künstliche Intelligenz, maschinellem Lernen und Predictive-Analysis-Technologie basierenden Trackingsystem stellt Lenzing erneut unter Beweis, wie sich mithilfe digitaler Technologie agile, vernetzte und nachhaltige Lieferketten gestalten lassen

Die Lenzing Gruppe hat gemeinsam mit project44, einem Anbieter von digitalen Supply-Chain-Lösungen, ein Verfahren zur Echtzeit-Lieferverfolgung von Containern eingeführt. Im Einklang mit den Nachhaltigkeitszielen von Lenzing ermöglicht das Trackingsystem den Partnern entlang der Lieferkette auch einen besseren Überblick über die CO2-Emissionen und optimiert dadurch das Kundenerlebnis.

  • Die Zusammenarbeit mit project44, einem Anbieter von Supply-Chain-Lösungen, zielt darauf ab, die Transparenz und Effizienz zu steigern und gleichzeitig einen vollkommen neuen Überblick über die CO2-Emissionen bis auf Containerebene zu ermöglichen
  • Das neue System zur Echtzeit-Lieferverfolgung von Containern bietet Lösungen zur Bewältigung der Komplexität der Lieferketten in der Faserindustrie, die in den letzten Jahren deutlich zugenommen hat
  • Mit dem auf Künstliche Intelligenz, maschinellem Lernen und Predictive-Analysis-Technologie basierenden Trackingsystem stellt Lenzing erneut unter Beweis, wie sich mithilfe digitaler Technologie agile, vernetzte und nachhaltige Lieferketten gestalten lassen

Die Lenzing Gruppe hat gemeinsam mit project44, einem Anbieter von digitalen Supply-Chain-Lösungen, ein Verfahren zur Echtzeit-Lieferverfolgung von Containern eingeführt. Im Einklang mit den Nachhaltigkeitszielen von Lenzing ermöglicht das Trackingsystem den Partnern entlang der Lieferkette auch einen besseren Überblick über die CO2-Emissionen und optimiert dadurch das Kundenerlebnis.

Um die zunehmende Komplexität der Lieferketten innerhalb der Branche zu bewältigen, hat Lenzing eine vollständig integrierte Echtzeit-Programmierschnittstelle (API) zwischen ihre SAP-Software und der Plattform von project44 eingebunden. In Kombination mit fortschrittlicher künstlicher Intelligenz (KI), GPS-Sensoren und Technologien für maschinelles Lernen kann Lenzing ihren Kunden nun genaue Echtzeit-Informationen zu den Faserbestellungen bereitstellen – vom Lieferstatus über den Standort der Container bis hin zur Verfolgung der Schiffsrouten und den voraussichtlichen Ankunftszeiten in Häfen weltweit.

Zusammenarbeit für das gemeinsame Ziel einer besseren CO2-Transparenz
Im Rahmen ihres Nachhaltigkeitsversprechens bietet Lenzing durch das Echtzeit-Sendungsverfolgungssystem ihren Partnern in der Wertschöpfungskette verbesserte Lösungen, um ihre CO2-Reduktionsziele zu erreichen. So erhalten Kunden sowohl auf Sendungs- als auch Containerebene Zugang zu Daten über Scope-3-Emissionen, die vom Global Logistics Emissions Council (GLEC) bestätigt sind. Anhand dieser Daten können Lenzing und ihre Kunden gemeinsam Ziele formulieren und Transportpläne anpassen, um die CO2-Emissionen zu reduzieren.

Das neue Lenzing System zur Echtzeit-Lieferverfolgung steht den Kunden des Unternehmens ab September weltweit zur Verfügung.

Source:

Lenzing Gruppe

drop of orders (c) ACIMIT
26.07.2023

Italian Textile Machinery: 2nd Q 2023 Drop in Order Intake

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

During the second quarter of 2023, the orders index for textile machinery, as compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, dropped significantly compared to 2022 April – June 2022 period (-30%). In absolute terms, the index stood at 85.1 points (basis 2015=100).

This drop is the result of a reduction in the collection of new orders recorded by manufacturers both domestically and on foreign markets. The decrease in orders in Italy amounted to 21%, whereas a 31% downtrend was observed abroad. The absolute value of the index on foreign markets settled at 81.9 points, while in Italy it stands at 117.2 points. New orders for the second quarter amounted to 4.1 months of guaranteed production. ACIMIT’s data also shows that the use of production capacity by Italian manufacturers was 70% for the first half of 2023. This percentage is expected to remain stable for the second half of the year.

ACIMIT president Marco Salvadè stated that, “The orders index for the second quarter elaborated by our Economics Department clearly shows a decline in new orders both in Italy and abroad compared to the previous year. The decline that usually precedes an event such as ITMA, the international textile machinery exhibition held last June in Milan, however, is part of a negative trend that has been going on for several quarters”.

Uncertainty appears to be weighing heavily especially on markets abroad, where foreign trade statistics updated to the first quarter of 2023 are marked by a slackening in Italian sales in some important reference markets, such as Turkey, China, the United States and Pakistan.

Salvadè added that, “Feedback from over 400 Italian companies that took part in ITMA is positive. It’s now necessary for the many contacts made during the event to materialize and for the demand for machinery in the main textile machinery markets to resume a path towards growth.”

More information:
ACIMIT orders index
Source:

ACIMIT

09.06.2023

NCTO: Industry roundtable discussion with key textile executives

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in the roundtable and outlined critical policies, such as: the importance of maintaining the yarn forward rule of origin in the Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and other trade agreements; advancing the Miscellaneous Tariff Bill (MTB) and its importance to domestic manufacturers; closing the de minimis loophole in U.S. trade law; addressing larger systemic trade issues, particularly the use of forced labor, with China; and upholding buy American and Berry Amendment government procurement policies.

“We deeply appreciate Assistant USTR Agama’s visit to the heart of the U.S. textile industry in North and South Carolina this week to meet with U.S. textile executives and experience first-hand the breadth of the industry’s innovation, advanced sustainability practices, capital investments and critical contributions to local economies and the U.S. economy as a whole,” said Kim Glas, president and CEO of NCTO. “The three-day visit by Dr. Agama and the USTR textile team included facility tours of several NCTO member companies, all of which have made major investments in state-of-the-art manufacturing facilities that are part of a broader domestic industry supply chain that produced $65.8 billion in output in 2022 and employed 538,000 workers.”

Glas continued: “We are also grateful for Dr. Agama’s participation in the industry roundtable hosted by Unifi and substantive discussions around policy opportunities and challenges. We look forward to working closely with Dr. Agama, the USTR textile team and U.S. Trade Representative Ambassador Katherine Tai to advance policies that provide incentives for onshoring and nearshoring production and bolstering the industry’s competitiveness, while enforcing policies that address illegal trade practices that undermine this industry.”

“The U.S. textile industry has always been resilient, innovative, and a driving force of our nation’s competitiveness,” said Acting Assistant U.S. Trade Representative for Textiles Dr. Laurie-Ann Agama. “For USTR, this local engagement and conversations underscore our need to create trade policies that put workers first and promote inclusive economic growth. The spinning, knitting, and weaving operations of the textile industry are at the center of many communities across the Carolinas. This was another opportunity to hear first-hand how we trade can create jobs that allow workers, businesses, and communities to thrive.”

Source:

National Council of Textile Organizations