From the Sector

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

Carbios inaugurated its textile preparation line at its demonstration plant in Clermont-Ferrand, in the presence of Mr. Lescure, French Minister for Industry. To streamline the textile preparation phase, which is currently carried out by hand or on several lines, Carbios has developed a fully integrated and automated line that transforms textile waste from used garments or cutting scraps into raw material suitable for depolymerization with its enzymatic biorecycling process. This patented line integrates all preparation stages (shredding and extraction of hard points such as buttons or fasteners), and provides Carbios with a high-performance, scalable development tool. The platform will help validate the biorecycling technology for textiles at demonstration plant scale (by 2024), and provides Carbios with expertise in working with collection and sorting operators to specify the quality of textiles and the preparation steps needed to make them suitable for enzymatic recycling. This expertise will also be invaluable to brands in the eco-design of their products.

Current collection, sorting and preparation infrastructures limit the amount of textile waste available for “fiber-to-fiber” recycling. Collection rates average around 15-25% worldwide^[1], and much of the waste collected is exported to Africa, Asia or Latin America for sorting.

Moreover, textiles are highly complex materials, with yarns of different composition (or nature) that are difficult, if not impossible, to physically separate. However, the highly selective enzyme developed by Carbios can specifically depolymerize the PET (polyester) present in textile material.

At present, textiles are sorted and prepared mainly by hand, with low yields, particularly for disruptors to recycling processes such as “hard points” (zips, buttons, etc.). To optimize this crucial phase, Carbios is contributing a textile preparation solution to accelerate the development of biorecycling in the textile industry. Enzymatic recycling, or biorecycling, therefore contributes to the construction of a textile recycling chain and the acceleration of textile circularity, also enabling brands to do away with used bottles.

^[1] Ellen MacArthur Foundation, 2017

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

Turkey became a Supply Center at the ITM 2022 Exhibition
The successful sales graph achieved at the ITM 2022 Exhibition proved that the difficulties experienced due to the pandemic for the last 3 years have been left behind. Turkey has become a supply center for European, Middle Eastern and African countries, especially with the disruption of the supply chain in Far East countries, including China. The profile of the professional visitors visiting the ITM 2022 Exhibition revealed that in the new world order that has shifted after the pandemic, the trade network has also changed hands and new players have appeared on the scene. The fact that manufacturers from all over the world such as Andorra, Angola, Honduras, Peru, Seychelles, Sierra Leone, Brazil, Sri Lanka, Tanzania, Egypt, Iran, and Oman purchased a large number of machinery and signed collaborations at the ITM 2022 Exhibition has proven this.

Exhibitors of ITM 2022 enlarge their stands for ITM 2024
Many company officials, who stated that they have achieved a sales graphic far above their expectations starting from the very first day of the ITM 2022 Exhibition and that they have hosted visitors from all over the world, decided to enlarge their stands at the ITM 2024 Exhibition. During the exhibition, companies visited the registration application points and applied for ITM 2024 participation.

The next meeting of the ITM and HIGHTEX Exhibitions will be held in Istanbul between 4-8 June 2024.

Kornit Digital Ltd. announced that Portuguese textile specialist Blur has installed the Kornit Presto S with Softener solution for sustainable, single-step direct-to-fabric production of multiple fabrics in any quantity. The print services provider, which supports the production needs of high fashion brands has previously installed multiple Kornit Atlas and Avalanche systems for industrial-scale digital direct-to-garment (DTG) production on demand.

Using Kornit’s efficient, eco-conscious, proprietary technology and consumables, Blur provides rapid fulfillment of orders ranging from a single piece to mass production, with an average order of about 500 items. Since implementing the Kornit Presto S, the system has been in operation day and night, producing samples during normal business hours and fulfilling diverse incoming orders overnight.

Mariano Dias, CEO at Blur, believes Kornit technology empowers his business to adapt quickly to the constantly evolving needs of his clients, which include both larger established brands seeking large quantities and ambitious designers seeking to build a brand with limited risk or investment. In many cases, they are fulfilling different types of designs for clients serving both Europe and North American markets.
“The quality is just outstanding, and some clients only want to print with Kornit technology”, said Dias. “We are extremely happy with Kornit’s collaboration, and our printers are working perfectly around the clock. Any textile printing company looking to move into fashion and work with famous brands will need both roll-to-roll and DTG capabilities. Our recommendation for success is to buy the Kornit Atlas and Kornit Presto printers.”

He added that Blur’s success with its current Kornit systems, as well as increased demand for sustainably-produced textiles, has the business considering the addition of a second Kornit Presto S to accommodate additional volumes.

“As with many of our customers, Blur was built around more traditional textile operations—in their case embroidery—before discovering the vast potential for growth and versatility offered by quick, efficient, digital production on demand,” said Chris Govier, Kornit Digital Europe, Middle East, and Africa President. “Whether you’re serving an internationally-known fashion house looking for more agile fulfillment and simpler supply chains, or the independent creator hoping to bring unique inspirations to life, Kornit’s product portfolio offers continuous opportunities to answer market needs, create new markets, and scale upwards under any conditions.”

International technology group ANDRITZ has received an order from Fouani, Nigeria, to supply two baby diaper lines for its facilities in Lagos. The lines will produce a wide range of diaper products with absorbent cores made of pulp and SAP (super absorbent polymer). Start-up is scheduled for 2022.

Fouani Nigeria Ltd was established in 2001 as a subsidiary of the Fouani Group of Companies. The company has grown to be a pioneer and the sole distributor of LG, Hisense, and Maxi products in Nigeria, Africa, thus winning several awards for its proactive market penetration.

The two baby diaper lines feature the most advanced forming technology for the absorbent core and SAP dosing.The lines are equipped with a web tensioning control system and quality check devices to ensure a high level of production quality. In addition, ANDRITZ will provide services for installation and start-up of the machines.